RE: Getting ownership for various boards/platforms configs

RE: Getting ownership for various boards/platforms configs

[Baxter, Robert]

> -----Original Message-----
> From: linuxppc-dev-bounces@ozlabs.org=20
> [mailto:linuxppc-dev-bounces@ozlabs.org] On Behalf Of Kumar Gala
> Sent: Thursday, June 02, 2005 4:19 PM
> To: Linux PPC Embedded list; linuxppc-dev list
> Subject: Getting ownership for various boards/platforms configs
>=20
> One issue that comes up from time to time is knowing who to contact=20
> about some of the various boards that are supported for PPC.  I've=20
> suggested in the past that we create a MAINTAINERS file in=20
> arch/ppc/platforms.  I've started with a list of all the _defconfigs=20
> that we have and would like to see if we can get contacts for the=20
> boards.  All this list is meant to be is a contact point.
>=20
> The following is the list, I'll keep a live copy at=20
> http://gate.crashing.org/~galak/platform-owners.  Once it=20
> gets flushed=20
> out I'll turn it into file that looks more like the toplevel=20
> MAINTAINERS file.  If we dont have any owners for a board we can=20
> discuss if support for it should be removed.  Please email me if you=20
> feel you are the owner of any board/config.
>=20
> thanks
>=20
> - kumar
>=20

> gemini

I'll take this one.

rbaxter@curtisswright.com

Rob Baxter
Curtiss-Wright Controls, Embedded Computing

RE: Getting ownership for various boards/platforms configs

[Paul Mackerras]

Baxter, Robert writes:

> > gemini
> 
> I'll take this one.

Great!  There are some changes to head.S that I have been wanting to
make for a while: specifically I want to remove the special case for
starting the second processor on gemini and the call to
gemini_prom_init.

Does current 2.6 work on gemini?

Paul.

RE: Getting ownership for various boards/platforms configs

[Baxter, Robert]

> -----Original Message-----
> From: Paul Mackerras [mailto:paulus@samba.org]=20
> Sent: Tuesday, June 07, 2005 9:43 PM
> To: Baxter, Robert
> Cc: Linux PPC Embedded list; linuxppc-dev list
> Subject: RE: Getting ownership for various boards/platforms configs
>=20
> Baxter, Robert writes:
>=20
> > > gemini
> >=20
> > I'll take this one.
>=20
> Great!  There are some changes to head.S that I have been wanting to
> make for a while: specifically I want to remove the special case for
> starting the second processor on gemini and the call to
> gemini_prom_init.
>=20
> Does current 2.6 work on gemini?
>=20
> Paul.
>=20

Yes, you may remove the special case for starting the second processor
and the call to gemini_prom_init.  I'm currenting in the middle of
getting our stuff over to 2.6, so the current answer would be no.

--
-Rob

Getting ownership for various boards/platforms configs

[Kumar Gala]

One issue that comes up from time to time is knowing who to contact 
about some of the various boards that are supported for PPC.  I've 
suggested in the past that we create a MAINTAINERS file in 
arch/ppc/platforms.  I've started with a list of all the _defconfigs 
that we have and would like to see if we can get contacts for the 
boards.  All this list is meant to be is a contact point.

The following is the list, I'll keep a live copy at 
http://gate.crashing.org/~galak/platform-owners.  Once it gets flushed 
out I'll turn it into file that looks more like the toplevel 
MAINTAINERS file.  If we dont have any owners for a board we can 
discuss if support for it should be removed.  Please email me if you 
feel you are the owner of any board/config.

thanks

- kumar

adir
ads8272
apus
ash
beech
bseip
bubinga
cedar
chestnut
common
cpci405
cpci690
ebony
ep405
est8260
ev64260
FADS
gemini
hdpu
ibmchrp
IVMS8
k2
katana
lite5200
lopec
luan
mbx
mcpn765
menf1			Dead (Matt Porter)
mpc834x_sys             Kumar Gala
mpc8540_ads             Kumar Gala
mpc8548_cds             Kumar Gala
mpc8555_cds             Kumar Gala
mpc8560_ads             Kumar Gala
mvme5100
oak
ocotea
pcore
pmac
power3
pplus
prpmc750
prpmc800
radstone_ppc7d
rainier
redwood5
redwood6
redwood
rpx8260
rpxcllf
rpxlite
sandpoint
SM850
SPD823TS
spruce
stx_gp3
sycamore
TQM823L
TQM8260
TQM850L
TQM860L
walnut

Re: Getting ownership for various boards/platforms configs

[Simon Richter]

[-- Attachment #1: Type: text/plain, Size: 124 bytes --]

Hi,

Kumar Gala wrote:

> apus

I have such a beast and would like to get 2.6 to compile and work again
for APUS.

   Simon

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 374 bytes --]

Re: Getting ownership for various boards/platforms configs

[Geert Uytterhoeven]

On Fri, 3 Jun 2005, Simon Richter wrote:
> Kumar Gala wrote:
> 
> > apus
> 
> I have such a beast and would like to get 2.6 to compile and work again
> for APUS.

Please coordinate with Roman Zippel.

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

Re: Getting ownership for various boards/platforms configs

[Benjamin Herrenschmidt]

On Fri, 2005-06-03 at 10:01 +0200, Geert Uytterhoeven wrote:
> On Fri, 3 Jun 2005, Simon Richter wrote:
> > Kumar Gala wrote:
> > 
> > > apus
> > 
> > I have such a beast and would like to get 2.6 to compile and work again
> > for APUS.
> 
> Please coordinate with Roman Zippel.

Damn ! I had hoped APUS would just die ... :)

Ben.

Re: Getting ownership for various boards/platforms configs

[Mark A. Greer]

Two things:

1) What is "common" in your list?

2) On a slightly different note...if no one volunteers to look after the 
following ones, I vote to remove them:

> k2
> lopec
> mcpn765
> menf1            Dead (Matt Porter) 

 > pmac  :)

Are there others?

Mark

Re: Getting ownership for various boards/platforms configs

[Benjamin Herrenschmidt]

On Thu, 2005-06-02 at 17:00 -0700, Mark A. Greer wrote:
> Two things:
> 
> 1) What is "common" in your list?
> 
> 2) On a slightly different note...if no one volunteers to look after the 
> following ones, I vote to remove them:
> 
> > k2
> > lopec
> > mcpn765
> > menf1            Dead (Matt Porter) 
> 
>  > pmac  :)


What is pmac here ? PowerMac or some other board ? :)

Ben.

Re: Getting ownership for various boards/platforms configs

[Kumar Gala]

On Jun 2, 2005, at 7:00 PM, Mark A. Greer wrote:

> Two things:
>
> 1) What is "common" in your list?

Good question, hopefully Paul knows.  I just did an ls in 
arch/ppc/configs/ to create the list.

- kumar

Re: Getting ownership for various boards/platforms configs

[Benjamin Herrenschmidt]

On Thu, 2005-06-02 at 19:09 -0500, Kumar Gala wrote:
> On Jun 2, 2005, at 7:00 PM, Mark A. Greer wrote:
> 
> > Two things:
> >
> > 1) What is "common" in your list?
> 
> Good question, hopefully Paul knows.  I just did an ls in 
> arch/ppc/configs/ to create the list.

it's pmac+chrp+prep in a single image

Ben.

Re: Getting ownership for various boards/platforms configs

[Kumar Gala]

Ben,

Can I put you do for maintainer of pmac and common?  any others?

- kumar

On Jun 2, 2005, at 7:22 PM, Benjamin Herrenschmidt wrote:

> On Thu, 2005-06-02 at 19:09 -0500, Kumar Gala wrote:
>> On Jun 2, 2005, at 7:00 PM, Mark A. Greer wrote:
>>
>>> Two things:
>>>
>>> 1) What is "common" in your list?
>>
>> Good question, hopefully Paul knows.  I just did an ls in
>> arch/ppc/configs/ to create the list.
>
> it's pmac+chrp+prep in a single image
>
> Ben.

Re: Getting ownership for various boards/platforms configs

[Matt Porter]

On Thu, Jun 02, 2005 at 06:19:11PM -0500, Kumar Gala wrote:
> One issue that comes up from time to time is knowing who to contact 
> about some of the various boards that are supported for PPC.  I've 
> suggested in the past that we create a MAINTAINERS file in 
> arch/ppc/platforms.  I've started with a list of all the _defconfigs 
> that we have and would like to see if we can get contacts for the 
> boards.  All this list is meant to be is a contact point.
> 
> The following is the list, I'll keep a live copy at 
> http://gate.crashing.org/~galak/platform-owners.  Once it gets flushed 
> out I'll turn it into file that looks more like the toplevel 
> MAINTAINERS file.  If we dont have any owners for a board we can 
> discuss if support for it should be removed.  Please email me if you 
> feel you are the owner of any board/config.
> 
> thanks
> 
> - kumar
> 
> ash
> beech

These are't in 2.6, remove the defconfig

> bubinga

me/ebs

> cedar

This isn't in 2.6, remove the defconfig

> ebony

me/ebs

> k2

I did the original port, now unmaintained/obsolete..die die die.

> lopec

trini is probably the maintainer here...he likes this board.

> luan

me

> menf1			Dead (Matt Porter)

Remove it, yes.

> oak

I think it's time to remove it...unmaintained.

> ocotea

me/ebs

> rainier

Not in 2.6...remove defconfig

> redwood5
> redwood6

um...dfarnsworth, want them formally?

> redwood

Not in 2.6...remove defconfig

> stx_gp3

me

> sycamore

me

> walnut

me

Re: Getting ownership for various boards/platforms configs

[Dale Farnsworth]

On Fri, Jun 03, 2005 at 12:18:22AM +0000, Matt Porter wrote:
> > redwood5
> > redwood6
> 
> um...dfarnsworth, want them formally?

Sure, put me down for redwood5 and redwood6

-Dale

Re: Getting ownership for various boards/platforms configs

[Wojciech Kromer]

Dnia 2005-06-03 01:19, Użytkownik Kumar Gala napisał:

> One issue that comes up from time to time is knowing who to contact 
> about some of the various boards that are supported for PPC. I've 
> suggested in the past that we create a MAINTAINERS file in 
> arch/ppc/platforms. I've started with a list of all the _defconfigs 
> that we have and would like to see if we can get contacts for the 
> boards. All this list is meant to be is a contact point.
>
>
There is another issue..

May I suggest to add one full-custom board?
There are a lot of changes to do inside uart,fec,fcc drivers with a lot
of #ifdefs,
just because different use of mpc resources on different boards.
Why it's not configured via menuconfig?
Another nice example is inside status_led.h...

Re: Getting ownership for various boards/platforms configs

[Pavel Fedin]

Kumar Gala wrote:
> One issue that comes up from time to time is knowing who to contact 
> about some of the various boards that are supported for PPC.  I've 
> suggested in the past that we create a MAINTAINERS file in 
> arch/ppc/platforms.

  I am an owner of PegasosII board. You didn't mention it here.

-- 
  Kind regards, Pavel Fedin

Re: Getting ownership for various boards/platforms configs

[Geert Uytterhoeven]

On Fri, 3 Jun 2005, Pavel Fedin wrote:
> Kumar Gala wrote:
> > One issue that comes up from time to time is knowing who to contact about
> > some of the various boards that are supported for PPC.  I've suggested in
> > the past that we create a MAINTAINERS file in arch/ppc/platforms.
> 
>  I am an owner of PegasosII board. You didn't mention it here.

Pegasos II is CHRP, hence under common (and BenH will take care of it? ;-).

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

Re: Getting ownership for various boards/platforms configs

[Benjamin Herrenschmidt]

On Fri, 2005-06-03 at 10:02 +0200, Geert Uytterhoeven wrote:
> On Fri, 3 Jun 2005, Pavel Fedin wrote:
> > Kumar Gala wrote:
> > > One issue that comes up from time to time is knowing who to contact about
> > > some of the various boards that are supported for PPC.  I've suggested in
> > > the past that we create a MAINTAINERS file in arch/ppc/platforms.
> > 
> >  I am an owner of PegasosII board. You didn't mention it here.
> 
> Pegasos II is CHRP, hence under common (and BenH will take care of it? ;-).

Yup, and Sven Luther is the actual maintainer of that bit of chrp.

Ben.