Kernel 2.6.10 on the MPC5200

Kernel 2.6.10 on the MPC5200

[Vlad L]

Hello,

I am new in this list.
We should run Linux Kernel 2.6.10 on the Light5200
board (MPC5200).
Please, direct me to links were can I download GCC
(and others) and Kernel, which are good point to start
from.

Thanks in advance.
Vlad.


	
		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - You care about security. So do we. 
http://promotions.yahoo.com/new_mail

Re: Kernel 2.6.10 on the MPC5200

[Babarovic Ivica]

[-- Attachment #1: Type: text/plain, Size: 1104 bytes --]

Vlad L wrote:

>Hello,
>
>I am new in this list.
>We should run Linux Kernel 2.6.10 on the Light5200
>board (MPC5200).
>  
>
Try this kernel: http://246tnt.com/mpc52xx/
It works for me.

>Please, direct me to links were can I download GCC
>(and others) and Kernel, which are good point to start
>from.
>  
>
There is a tool out there:
http://kegel.com/crosstool/current/doc/crosstool-howto.html
Read about it. You will basically need to change a couple of files
to generate your cross compiler environment.
I'll attach my files.

I also use another tool for my basic file system layout.
It's called buildroot. You can find it on busybox pages.
http://www.uclibc.org/cgi-bin/cvsweb/buildroot/
But it looks like this page is not accessible now.

>Thanks in advance.
>Vlad.
>
>
>	
>		
>__________________________________ 
>Do you Yahoo!? 
>Yahoo! Mail - You care about security. So do we. 
>http://promotions.yahoo.com/new_mail
>_______________________________________________
>Linuxppc-embedded mailing list
>Linuxppc-embedded@ozlabs.org
>https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
>
>
>  
>


[-- Attachment #2: demo-ppc603e.sh --]
[-- Type: text/plain, Size: 664 bytes --]

#!/bin/sh
set -ex
TARBALLS_DIR=$HOME/src/mpc5200_binar/build-tools/downloads
RESULT_TOP=$HOME/src/mpc5200_binar/tools
export TARBALLS_DIR RESULT_TOP
GCC_LANGUAGES="c,c++"
export GCC_LANGUAGES

# Really, you should do the mkdir before running this,
# and chown /opt/crosstool to yourself so you don't need to run as root.
mkdir -p $RESULT_TOP

# Build the toolchain.  Takes a couple hours and a couple gigabytes.
#eval `cat powerpc-604.dat gcc-3.4.0-glibc-2.3.2.dat` sh all.sh --builduserland --notest
 eval `cat powerpc-603e.dat gcc-3.4.1-glibc-2.3.3.dat`  sh all.sh --notest
#eval `cat powerpc-604.dat gcc-3.4.1-glibc-20040827.dat` sh all.sh --notest

echo Done.

[-- Attachment #3: powerpc-603e.dat --]
[-- Type: text/plain, Size: 125 bytes --]

TARGET=powerpc-603e-linux-gnu
TARGET_CFLAGS="-O -mcpu=603e"
GCC_EXTRA_CONFIG="--with-cpu=603e --enable-cxx-flags=-mcpu=603e"

Re: Kernel 2.6.10 on the MPC5200

[Babarovic Ivica]

> It's called buildroot. You can find it on busybox pages.
> http://www.uclibc.org/cgi-bin/cvsweb/buildroot/
> But it looks like this page is not accessible now.
>
You will find it here:
http://www.uclibc.org/cgi-bin/cvsweb/trunk/buildroot/
Docs:
http://www.uclibc.org/cgi-bin/cvsweb/*checkout*/trunk/buildroot/docs/buildroot-documentation.html?rev=9628