Re: Help with MPC5200 + Bestcomm + Local Plus Bus.... same problem [ifm ScanMail: oK]

Re: Help with MPC5200 + Bestcomm + Local Plus Bus.... same problem [ifm ScanMail: oK]

[roger blofeld]

---- Original Message ----

From: "jan_baldauf@ifm-electronic.com" <jan_baldauf@ifm-electronic.com>

To: linuxppc-embedded@ozlabs.org

Sent: Friday, December 7, 2007 4:58:56 AM

Subject: Help with MPC5200 + Bestcomm + Local Plus Bus.... same problem [ifm ScanMail: oK] 



  

Hello Roger, 

 

i have read your message. I have now the same problem. I use a CPLD on the Local Plus Bus. The CPLD generates interrupts for the MPC5200B processor. Because of the quick signals, i want to use the Bestcomm unit, to push the Data ( 3 x 16 bit register) directly into the memory. I use the same Kernel. It would be nice, if you could help me, to program a linux driver for that. Or maybe you have any examples. So looking forward for you reply. Thanks a lot for your time. 

 

best regards Jan Baldauf


------




Jan,

 I never did get my FPGA driver working with the bestcomm unit. I ended up doing a half-baked version where I would program the lpc to transfer the data into the FIFO and generate an interrupt when it finished. I could then copy the data quickly from the FIFO to memory (The FIFO interface is wider and faster than my FPGA, so I do reduce processor loading somewhat over directly reading the FPGA) That works OK for small data transfers, but is not optimal.



 In the current mainline there is support for a "gen_bd" bestcomm task which I presume is to be used for the purpose you imply. Perhaps somebody has an example of using that?





good luck!

-rb









      ____________________________________________________________________________________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping

Help with MPC5200 + Bestcomm + Local Plus Bus.... same problem [ifm ScanMail: oK]

[jan_baldauf]

[-- Attachment #1: Type: text/plain, Size: 516 bytes --]

Hello Roger,

i have read your message. I have now the same problem. I use a CPLD on the 
Local Plus Bus. The CPLD generates interrupts for the MPC5200B processor. 
Because of the quick signals, i want to use the Bestcomm unit, to push the 
Data ( 3 x 16 bit register) directly into the memory. I use the same 
Kernel. It would be nice, if you could help me, to program a linux driver 
for that. Or maybe you have any examples. So looking forward for you 
reply. Thanks a lot for your time.

best regards Jan Baldauf

[-- Attachment #2: Type: text/html, Size: 645 bytes --]