* ongoing mesh saga ...
@ 2011-03-11 18:04 kevin diggs
2011-03-11 20:25 ` Segher Boessenkool
0 siblings, 1 reply; 5+ messages in thread
From: kevin diggs @ 2011-03-11 18:04 UTC (permalink / raw)
To: linuxppc-dev
Hi,
While trying to figure out why the MESH SCSI controller will not work
with the 4.3.5 compiler but will work when compiled with 4.1.2, I
noticed some ... unfortunate behavior from the 4.3.5 compiler. Before
I try to see if I can fix it (i.e. the compiler), it would be nice to
see if the "issue" still exists.
Is there any chance someone with a compiler newer than 4.3.5 would be
willing to get me -S output from a mesh compile (preferably not a
module unless it does not make any difference) for 2.6.36. Using:
head -1 <top>/drivers/scsi/.mesh.o.cmd
you can get a command line which can then be edited to get a script to
do a -S compile (watch out for the '\#' in KBUILD_STR(s)).
Thanks!
kevin
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: ongoing mesh saga ...
2011-03-11 18:04 ongoing mesh saga kevin diggs
@ 2011-03-11 20:25 ` Segher Boessenkool
2011-03-12 1:27 ` kevin diggs
0 siblings, 1 reply; 5+ messages in thread
From: Segher Boessenkool @ 2011-03-11 20:25 UTC (permalink / raw)
To: kevin diggs; +Cc: linuxppc-dev
> Is there any chance someone with a compiler newer than 4.3.5 would be
> willing to get me -S output from a mesh compile (preferably not a
> module unless it does not make any difference) for 2.6.36. Using:
>
> head -1 <top>/drivers/scsi/.mesh.o.cmd
>
> you can get a command line which can then be edited to get a script to
> do a -S compile (watch out for the '\#' in KBUILD_STR(s)).
make drivers/scsi/mesh.s
File sent separately, I doubt the list wants to see it.
Segher
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: ongoing mesh saga ...
2011-03-11 20:25 ` Segher Boessenkool
@ 2011-03-12 1:27 ` kevin diggs
2011-03-12 1:39 ` Segher Boessenkool
0 siblings, 1 reply; 5+ messages in thread
From: kevin diggs @ 2011-03-12 1:27 UTC (permalink / raw)
To: Segher Boessenkool; +Cc: linuxppc-dev
Hi,
On Fri, Mar 11, 2011 at 2:25 PM, Segher Boessenkool
<segher@kernel.crashing.org> wrote:
>
> make drivers/scsi/mesh.s
>
??? I thought I have tried this in the past and it did not work? The
make <path>/<file>.s thing?
Thanks for the tip!
kevin
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: ongoing mesh saga ...
2011-03-12 1:27 ` kevin diggs
@ 2011-03-12 1:39 ` Segher Boessenkool
2011-03-12 1:43 ` kevin diggs
0 siblings, 1 reply; 5+ messages in thread
From: Segher Boessenkool @ 2011-03-12 1:39 UTC (permalink / raw)
To: kevin diggs; +Cc: linuxppc-dev
>> make drivers/scsi/mesh.s
>>
> ??? I thought I have tried this in the past and it did not work? The
> make <path>/<file>.s thing?
>
> Thanks for the tip!
You need to have the driver in your kernel config, or things will
go weird.
Segher
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: ongoing mesh saga ...
2011-03-12 1:39 ` Segher Boessenkool
@ 2011-03-12 1:43 ` kevin diggs
0 siblings, 0 replies; 5+ messages in thread
From: kevin diggs @ 2011-03-12 1:43 UTC (permalink / raw)
To: Segher Boessenkool; +Cc: linuxppc-dev
Hi,
Good to know. I just tried this on an x86 laptop. It was NOT happy!
And, obviously, I am not using a mesh SCSI controller on my Toshiba
A75.
And thanks again for your time!
kevin
On Fri, Mar 11, 2011 at 7:39 PM, Segher Boessenkool
<segher@kernel.crashing.org> wrote:
>>> make drivers/scsi/mesh.s
>>>
>> ??? I thought I have tried this in the past and it did not work? The
>> make <path>/<file>.s thing?
>>
>> Thanks for the tip!
>
> You need to have the driver in your kernel config, or things will
> go weird.
>
>
> Segher
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-03-12 1:43 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-11 18:04 ongoing mesh saga kevin diggs
2011-03-11 20:25 ` Segher Boessenkool
2011-03-12 1:27 ` kevin diggs
2011-03-12 1:39 ` Segher Boessenkool
2011-03-12 1:43 ` kevin diggs
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox