LinuxPPC-Dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Steven Blakeslee <BlakesleeS@embeddedplanet.com>
To: "'t.vanremortel@ha.be'" <t.vanremortel@ha.be>,
	PPC Mailinglist <linuxppc-embedded@lists.linuxppc.org>
Subject: RE: EP405 network interface
Date: Thu, 26 Jun 2003 14:39:26 -0400	[thread overview]
Message-ID: <D73A25AA6E54D511AD74009027B1110F3C08ED@ORION> (raw)


Did you enable the phy in the Board Control Status Register?

-----Original Message-----
From: Toni Van Remortel [mailto:t.vanremortel@ha.be]
Sent: Thursday, June 26, 2003 10:01 AM
To: PPC Mailinglist
Subject: EP405 network interface



Hi all,

I cannot get the NIC working on my EP405. I used the ep405_config from
the linuxppc_2_4_devel tree.

This is a part of the output:

...
loop: loaded (max 8 devices)
eth0: No PHY device found.
removing net dev
...

So it seems that the kernel doesn't find the NIC (but it is there, and
working, ep-bootloader can use it to download the image).

Anybody an idea?

I already checked the NIC support, and the onboard-IBM NIC support is
enabled.

Regards,
--
                           Toni Van Remortel
              Wetenschappelijk Medewerker - D-science lab
                 Tel: 03 205 61 72 - Fax: 03 205 61 95
                      E-mail: t.vanremortel@ha.be


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

             reply	other threads:[~2003-06-26 18:39 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-06-26 18:39 Steven Blakeslee [this message]
2003-06-26 18:45 ` EP405 network interface Cort Dougan
2003-07-02 14:25 ` Toni Van Remortel
  -- strict thread matches above, loose matches on Subject: below --
2003-07-02 14:29 Steven Blakeslee
2003-06-26 14:01 Toni Van Remortel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=D73A25AA6E54D511AD74009027B1110F3C08ED@ORION \
    --to=blakeslees@embeddedplanet.com \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    --cc=t.vanremortel@ha.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox