LinuxPPC-Dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
* want help regarding toolchain for E8260 Planetcore
@ 2003-12-18  4:21 Nikhil Bhargava
  0 siblings, 0 replies; 2+ messages in thread
From: Nikhil Bhargava @ 2003-12-18  4:21 UTC (permalink / raw)
  To: dank, linuxppc-embedded


hello,

Thanks for all members of this grp for helping me out on almost all
ocassions when i have a doubt going beyond myself.

I have to port opensource Linux 2.4.X on to an E8260 mpc 8260 target
board from planet core. I will use this development board in testing
some protocol stacks. Can any one tell me what are the most stable
versions of Gcc, Glibc etc should i use. Further what components to
choose and what to discard from the standard os. Moreso, the board
already have a bootloader running so i just need to port the os on it.
In this scenarios how should i go about it. I will be using BDI 2000
emulator/debugger.

I am following Karim's embedded linux book and web resources for this.


Regards,

Nikhil Bhargava

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 2+ messages in thread

* RE: want help regarding toolchain for E8260 Planetcore
@ 2003-12-20 19:46 Steven Blakeslee
  0 siblings, 0 replies; 2+ messages in thread
From: Steven Blakeslee @ 2003-12-20 19:46 UTC (permalink / raw)
  To: 'Nikhil Bhargava ', 'dank@kegel.com ',
	'linuxppc-embedded@lists.linuxppc.org '


 I use ELDK(www.denx.de) as the tool chain and the linuxppc_2_4_devel tree
to run on the ep8260

-----Original Message-----
From: Nikhil Bhargava
To: dank@kegel.com; linuxppc-embedded@lists.linuxppc.org
Sent: 12/17/03 11:21 PM
Subject: want help regarding toolchain for E8260 Planetcore


hello,

Thanks for all members of this grp for helping me out on almost all
ocassions when i have a doubt going beyond myself.

I have to port opensource Linux 2.4.X on to an E8260 mpc 8260 target
board from planet core. I will use this development board in testing
some protocol stacks. Can any one tell me what are the most stable
versions of Gcc, Glibc etc should i use. Further what components to
choose and what to discard from the standard os. Moreso, the board
already have a bootloader running so i just need to port the os on it.
In this scenarios how should i go about it. I will be using BDI 2000
emulator/debugger.

I am following Karim's embedded linux book and web resources for this.


Regards,

Nikhil Bhargava


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2003-12-20 19:46 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-12-20 19:46 want help regarding toolchain for E8260 Planetcore Steven Blakeslee
  -- strict thread matches above, loose matches on Subject: below --
2003-12-18  4:21 Nikhil Bhargava

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox