From: Mark Brown <broonie@kernel.org>
To: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Caleb Crome <caleb@crome.org>,
Maciej S. Szmigiero <mail@maciej.szmigiero.name>,
Mark Brown <broonie@kernel.org>,
timur@tabi.org, broonie@kernel.org, mail@maciej.szmigiero.name,
alsa-devel@alsa-project.org, kernel@pengutronix.de,
linux-kernel@vger.kernel.org, caleb@crome.org,
lgirdwood@gmail.com, arnaud.mouiche@invoxia.com, lukma@denx.de,
fabio.estevam@nxp.com, linuxppc-dev@lists.ozlabs.org,
alsa-devel@alsa-project.org
Subject: Applied "ASoC: fsl_ssi: Maintain a mask of active streams" to the asoc tree
Date: Thu, 22 Feb 2018 13:17:00 +0000 [thread overview]
Message-ID: <E1eoqk8-0006Qq-HP@debutante> (raw)
In-Reply-To: <1515990087-11598-5-git-send-email-nicoleotsuka@gmail.com>
The patch
ASoC: fsl_ssi: Maintain a mask of active streams
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From e0582731abe004163e78ad2dac4cd1196db0908f Mon Sep 17 00:00:00 2001
From: Nicolin Chen <nicoleotsuka@gmail.com>
Date: Mon, 12 Feb 2018 14:03:12 -0800
Subject: [PATCH] ASoC: fsl_ssi: Maintain a mask of active streams
Checking TE and RE bits in SCR register doesn't work for AC97 mode
which enables SSIEN, TE and RE in the fsl_ssi_setup_ac97() that's
called during probe().
So when running into the trigger(), it will always get the result
of both TE and RE being enabled already, even if actually there is
no active stream.
This patch fixes this issue by adding a variable to log the active
streams manually.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Caleb Crome <caleb@crome.org>
Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/fsl/fsl_ssi.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 14046c32dc07..b277a563ff48 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -205,6 +205,7 @@ struct fsl_ssi_soc_data {
* @cpu_dai_drv: CPU DAI driver for this device
*
* @dai_fmt: DAI configuration this device is currently used with
+ * @streams: Mask of current active streams: BIT(TX) and BIT(RX)
* @i2s_net: I2S and Network mode configurations of SCR register
* @use_dma: DMA is used or FIQ with stream filter
* @use_dual_fifo: DMA with support for dual FIFO mode
@@ -249,6 +250,7 @@ struct fsl_ssi {
struct snd_soc_dai_driver cpu_dai_drv;
unsigned int dai_fmt;
+ u8 streams;
u8 i2s_net;
bool use_dma;
bool use_dual_fifo;
@@ -444,15 +446,14 @@ static void fsl_ssi_fifo_clear(struct fsl_ssi *ssi, bool is_rx)
static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
struct fsl_ssi_regvals *vals)
{
+ int dir = (&ssi->regvals[TX] == vals) ? TX : RX;
struct regmap *regs = ssi->regs;
struct fsl_ssi_regvals *avals;
int nr_active_streams;
- u32 scr;
int keep_active;
- regmap_read(regs, REG_SSI_SCR, &scr);
-
- nr_active_streams = !!(scr & SSI_SCR_TE) + !!(scr & SSI_SCR_RE);
+ nr_active_streams = !!(ssi->streams & BIT(TX)) +
+ !!(ssi->streams & BIT(RX));
if (nr_active_streams - 1 > 0)
keep_active = 1;
@@ -474,6 +475,9 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
keep_active);
/* Safely disable SCR register for the stream */
regmap_update_bits(regs, REG_SSI_SCR, scr, 0);
+
+ /* Log the disabled stream to the mask */
+ ssi->streams &= ~BIT(dir);
}
/*
@@ -549,6 +553,9 @@ static void fsl_ssi_config(struct fsl_ssi *ssi, bool enable,
}
/* Enable all remaining bits */
regmap_update_bits(regs, REG_SSI_SCR, vals->scr, vals->scr);
+
+ /* Log the enabled stream to the mask */
+ ssi->streams |= BIT(dir);
}
}
--
2.16.1
next prev parent reply other threads:[~2018-02-22 13:17 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-15 4:21 [PATCH v3 00/17] ASoC: fsl_ssi: Clean up - program flow level Nicolin Chen
2018-01-15 4:21 ` [PATCH v3 01/17] ASoC: fsl_ssi: Redefine RX and TX macros Nicolin Chen
2018-02-22 13:17 ` Applied "ASoC: fsl_ssi: Redefine RX and TX macros" to the asoc tree Mark Brown
2018-01-15 4:21 ` [PATCH v3 02/17] ASoC: fsl_ssi: Keep ssi->i2s_net updated Nicolin Chen
2018-01-15 4:21 ` [PATCH v3 03/17] ASoC: fsl_ssi: Clean up set_dai_tdm_slot() Nicolin Chen
2018-01-15 4:21 ` [PATCH v3 04/17] ASoC: fsl_ssi: Maintain a mask of active streams Nicolin Chen
2018-02-22 13:17 ` Mark Brown [this message]
2018-01-15 4:21 ` [PATCH v3 05/17] ASoC: fsl_ssi: Rename fsl_ssi_disable_val macro Nicolin Chen
2018-02-22 13:16 ` Applied "ASoC: fsl_ssi: Rename fsl_ssi_disable_val macro" to the asoc tree Mark Brown
2018-01-15 4:21 ` [PATCH v3 06/17] ASoC: fsl_ssi: Clear FIFO directly in fsl_ssi_config() Nicolin Chen
2018-01-15 4:21 ` [PATCH v3 07/17] ASoC: fsl_ssi: Clean up helper functions of trigger() Nicolin Chen
2018-02-22 13:16 ` Applied "ASoC: fsl_ssi: Clean up helper functions of trigger()" to the asoc tree Mark Brown
2018-01-15 4:21 ` [PATCH v3 08/17] ASoC: fsl_ssi: Add DAIFMT define for AC97 Nicolin Chen
2018-01-15 4:21 ` [PATCH v3 09/17] ASoC: fsl_ssi: Clean up fsl_ssi_setup_regvals() Nicolin Chen
2018-01-15 4:21 ` [PATCH v3 10/17] ASoC: fsl_ssi: Set xFEN0 and xFEN1 together Nicolin Chen
2018-01-15 4:21 ` [PATCH v3 11/17] ASoC: fsl_ssi: Use snd_soc_init_dma_data instead Nicolin Chen
2018-01-15 4:21 ` [PATCH v3 12/17] ASoC: fsl_ssi: Move one-time configurations to probe() Nicolin Chen
2018-01-15 4:21 ` [PATCH v3 13/17] ASoC: fsl_ssi: Setup AC97 in fsl_ssi_hw_init() Nicolin Chen
2018-01-15 4:21 ` [PATCH v3 14/17] ASoC: fsl_ssi: Clean up _fsl_ssi_set_dai_fmt() Nicolin Chen
2018-01-15 21:16 ` Maciej S. Szmigiero
2018-01-15 21:40 ` Nicolin Chen
2018-01-15 4:21 ` [PATCH v3 15/17] ASoC: fsl_ssi: Add bool synchronous to mark synchronous mode Nicolin Chen
2018-02-22 13:16 ` Applied "ASoC: fsl_ssi: Add bool synchronous to mark synchronous mode" to the asoc tree Mark Brown
2018-01-15 4:21 ` [PATCH v3 16/17] ASoC: fsl_ssi: Move DT related code to a separate probe() Nicolin Chen
2018-01-15 21:16 ` Maciej S. Szmigiero
2018-01-15 21:32 ` Nicolin Chen
2018-01-15 4:21 ` [PATCH v3 17/17] ASoC: fsl_ssi: Use ssi->streams instead of reading register Nicolin Chen
2018-01-15 18:35 ` [PATCH v3 00/17] ASoC: fsl_ssi: Clean up - program flow level Caleb Crome
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1eoqk8-0006Qq-HP@debutante \
--to=broonie@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=arnaud.mouiche@invoxia.com \
--cc=caleb@crome.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lukma@denx.de \
--cc=mail@maciej.szmigiero.name \
--cc=nicoleotsuka@gmail.com \
--cc=timur@tabi.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox