From: Frank Li <Frank.li@nxp.com>
To: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: "Krzysztof Wilczyński" <kw@linux.com>,
imx@lists.linux.dev, "Rob Herring" <robh@kernel.org>,
"open list:PCI DRIVER FOR FREESCALE LAYERSCAPE"
<linux-pci@vger.kernel.org>,
"open list" <linux-kernel@vger.kernel.org>,
"Minghuan Lian" <minghuan.Lian@nxp.com>,
"moderated list:PCI DRIVER FOR FREESCALE LAYERSCAPE"
<linux-arm-kernel@lists.infradead.org>,
"Roy Zang" <roy.zang@nxp.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"open list:PCI DRIVER FOR FREESCALE LAYERSCAPE"
<linuxppc-dev@lists.ozlabs.org>,
"Mingkai Hu" <mingkai.hu@nxp.com>
Subject: Re: [PATCH 2/3] PCI: layerscape: add suspend/resume for ls1021a
Date: Mon, 16 Oct 2023 10:45:25 -0400 [thread overview]
Message-ID: <ZS1Mhe9JOsY2JJER@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <ZSV1nJUAbUdLXkt4@lpieralisi>
On Tue, Oct 10, 2023 at 06:02:36PM +0200, Lorenzo Pieralisi wrote:
> On Tue, Oct 10, 2023 at 10:20:12AM -0400, Frank Li wrote:
> > On Wed, Oct 04, 2023 at 10:23:51AM -0400, Frank Li wrote:
> > > On Fri, Sep 15, 2023 at 02:43:05PM -0400, Frank Li wrote:
> > > > ls1021a add suspend/resume support.
> > > >
> > > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > > > ---
> > >
> > > ping
> > >
> > > Frank
> >
> > Ping
>
> Read and follow please (and then ping us):
> https://lore.kernel.org/linux-pci/20171026223701.GA25649@bhelgaas-glaptop.roam.corp.google.com
Could you please help point which specic one was not follow aboved guide?
Then I can update my code. I think that's efficial communication method. I
think I have read it serial times. But not sure which one violate the
guide?
@Bjorn Helgaas. How do you think so?
best regards
Frank Li
>
> > Frank
> >
> > >
> > > > drivers/pci/controller/dwc/pci-layerscape.c | 88 ++++++++++++++++++++-
> > > > 1 file changed, 87 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> > > > index 20c48c06e2248..bc5a8ff1a26ce 100644
> > > > --- a/drivers/pci/controller/dwc/pci-layerscape.c
> > > > +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> > > > @@ -35,6 +35,12 @@
> > > > #define PF_MCR_PTOMR BIT(0)
> > > > #define PF_MCR_EXL2S BIT(1)
> > > >
> > > > +/* LS1021A PEXn PM Write Control Register */
> > > > +#define SCFG_PEXPMWRCR(idx) (0x5c + (idx) * 0x64)
> > > > +#define PMXMTTURNOFF BIT(31)
> > > > +#define SCFG_PEXSFTRSTCR 0x190
> > > > +#define PEXSR(idx) BIT(idx)
> > > > +
> > > > #define PCIE_IATU_NUM 6
> > > >
> > > > struct ls_pcie_drvdata {
> > > > @@ -48,6 +54,8 @@ struct ls_pcie {
> > > > struct dw_pcie *pci;
> > > > const struct ls_pcie_drvdata *drvdata;
> > > > void __iomem *pf_base;
> > > > + struct regmap *scfg;
> > > > + int index;
> > > > bool big_endian;
> > > > };
> > > >
> > > > @@ -170,13 +178,91 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
> > > > return 0;
> > > > }
> > > >
> > > > +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> > > > +{
> > > > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > > > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > > > + u32 val;
> > > > +
> > > > + if (!pcie->scfg) {
> > > > + dev_dbg(pcie->pci->dev, "SYSCFG is NULL\n");
> > > > + return;
> > > > + }
> > > > +
> > > > + /* Send Turn_off message */
> > > > + regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> > > > + val |= PMXMTTURNOFF;
> > > > + regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> > > > +
> > > > + /* There are not register to check ACK, so wait PCIE_PME_TO_L2_TIMEOUT_US */
> > > > + mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> > > > +
> > > > + /* Clear Turn_off message */
> > > > + regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> > > > + val &= ~PMXMTTURNOFF;
> > > > + regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> > > > +}
> > > > +
> > > > +static void ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> > > > +{
> > > > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > > > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > > > + u32 val;
> > > > +
> > > > + regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> > > > + val |= PEXSR(pcie->index);
> > > > + regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> > > > +
> > > > + regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> > > > + val &= ~PEXSR(pcie->index);
> > > > + regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> > > > +}
> > > > +
> > > > +static int ls1021a_pcie_host_init(struct dw_pcie_rp *pp)
> > > > +{
> > > > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > > > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > > > + struct device *dev = pcie->pci->dev;
> > > > + u32 index[2];
> > > > + int ret;
> > > > +
> > > > + ret = ls_pcie_host_init(pp);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> > > > + if (IS_ERR(pcie->scfg)) {
> > > > + ret = PTR_ERR(pcie->scfg);
> > > > + dev_err(dev, "No syscfg phandle specified\n");
> > > > + pcie->scfg = NULL;
> > > > + return ret;
> > > > + }
> > > > +
> > > > + ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
> > > > + if (ret) {
> > > > + pcie->scfg = NULL;
> > > > + return ret;
> > > > + }
> > > > +
> > > > + pcie->index = index[1];
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > static const struct dw_pcie_host_ops ls_pcie_host_ops = {
> > > > .host_init = ls_pcie_host_init,
> > > > .pme_turn_off = ls_pcie_send_turnoff_msg,
> > > > };
> > > >
> > > > +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> > > > + .host_init = ls1021a_pcie_host_init,
> > > > + .pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> > > > +};
> > > > +
> > > > static const struct ls_pcie_drvdata ls1021a_drvdata = {
> > > > - .pm_support = false,
> > > > + .pm_support = true,
> > > > + .ops = &ls1021a_pcie_host_ops,
> > > > + .exit_from_l2 = ls1021a_pcie_exit_from_l2,
> > > > };
> > > >
> > > > static const struct ls_pcie_drvdata layerscape_drvdata = {
> > > > --
> > > > 2.34.1
> > > >
next prev parent reply other threads:[~2023-10-16 14:46 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-15 18:43 [PATCH 1/3] PCI: layerscape: add function pointer for exit_from_l2() Frank Li
2023-09-15 18:43 ` [PATCH 2/3] PCI: layerscape: add suspend/resume for ls1021a Frank Li
2023-10-04 14:23 ` Frank Li
2023-10-10 14:20 ` Frank Li
2023-10-10 16:02 ` Lorenzo Pieralisi
2023-10-16 14:45 ` Frank Li [this message]
2023-10-16 15:22 ` Bjorn Helgaas
2023-10-16 16:11 ` Frank Li
2023-10-16 16:25 ` Bjorn Helgaas
2023-10-16 16:59 ` Frank Li
2023-10-16 16:25 ` Lorenzo Pieralisi
2023-10-16 16:12 ` Lorenzo Pieralisi
2023-10-16 16:58 ` Manivannan Sadhasivam
2023-10-16 20:18 ` Frank Li
2023-10-17 8:17 ` Manivannan Sadhasivam
2023-09-15 18:43 ` [PATCH 3/3] PCI: layerscape: add suspend/resume for ls1043a Frank Li
2023-10-16 17:07 ` Manivannan Sadhasivam
2023-10-16 16:40 ` [PATCH 1/3] PCI: layerscape: add function pointer for exit_from_l2() Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZS1Mhe9JOsY2JJER@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=imx@lists.linux.dev \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lpieralisi@kernel.org \
--cc=minghuan.Lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=robh@kernel.org \
--cc=roy.zang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox