Re: [PATCH 2/3] PCI: layerscape: add suspend/resume for ls1021a

[Frank Li <Frank.li@nxp.com>]

On Mon, Oct 16, 2023 at 10:28:24PM +0530, Manivannan Sadhasivam wrote:
> On Fri, Sep 15, 2023 at 02:43:05PM -0400, Frank Li wrote:
> > ls1021a add suspend/resume support.
> > 
> 
> Please add what the driver is doing during suspend/resume.
> 
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> >  drivers/pci/controller/dwc/pci-layerscape.c | 88 ++++++++++++++++++++-
> >  1 file changed, 87 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> > index 20c48c06e2248..bc5a8ff1a26ce 100644
> > --- a/drivers/pci/controller/dwc/pci-layerscape.c
> > +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> > @@ -35,6 +35,12 @@
> >  #define PF_MCR_PTOMR		BIT(0)
> >  #define PF_MCR_EXL2S		BIT(1)
> >  
> > +/* LS1021A PEXn PM Write Control Register */
> > +#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
> > +#define PMXMTTURNOFF		BIT(31)
> > +#define SCFG_PEXSFTRSTCR	0x190
> > +#define PEXSR(idx)		BIT(idx)
> > +
> >  #define PCIE_IATU_NUM		6
> >  
> >  struct ls_pcie_drvdata {
> > @@ -48,6 +54,8 @@ struct ls_pcie {
> >  	struct dw_pcie *pci;
> >  	const struct ls_pcie_drvdata *drvdata;
> >  	void __iomem *pf_base;
> > +	struct regmap *scfg;
> > +	int index;
> >  	bool big_endian;
> >  };
> >  
> > @@ -170,13 +178,91 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
> >  	return 0;
> >  }
> >  
> > +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> > +{
> > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +	struct ls_pcie *pcie = to_ls_pcie(pci);
> > +	u32 val;
> > +
> > +	if (!pcie->scfg) {
> 
> Can this ever happen?
> 
> > +		dev_dbg(pcie->pci->dev, "SYSCFG is NULL\n");
> > +		return;
> > +	}
> > +
> > +	/* Send Turn_off message */
> 
> "Send PME_Turn_Off message"
> 
> > +	regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> > +	val |= PMXMTTURNOFF;
> > +	regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> > +
> > +	/* There are not register to check ACK, so wait PCIE_PME_TO_L2_TIMEOUT_US */
> 
> "There is no specific register to check for PME_To_Ack from endpoint. So on the
> safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US."
> 
> > +	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> > +
> > +	/* Clear Turn_off message */
> 
> "PME_Turn_off". But I'm not sure if this is really required. Are you doing it
> because the layerspace hw implements the PME_Turn_Off bit as "level triggered"?

I am not sure how hardware implement this. But reference manual said:
 
PMXMTTURNOFF:
Generate PM turnoff message for power management of PCI Express controllers.
This bit should be cleared by software.
0 Clear PM turnoff (default)
1 Trigger PM turnoff

Frank

> 
> > +	regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> > +	val &= ~PMXMTTURNOFF;
> > +	regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> > +}
> > +
> > +static void ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> > +{
> > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +	struct ls_pcie *pcie = to_ls_pcie(pci);
> > +	u32 val;
> > +
> 
> A comment here would be good.
> 
> > +	regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> > +	val |= PEXSR(pcie->index);
> > +	regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> > +
> > +	regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> > +	val &= ~PEXSR(pcie->index);
> > +	regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> > +}
> > +
> > +static int ls1021a_pcie_host_init(struct dw_pcie_rp *pp)
> > +{
> > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +	struct ls_pcie *pcie = to_ls_pcie(pci);
> > +	struct device *dev = pcie->pci->dev;
> > +	u32 index[2];
> > +	int ret;
> > +
> > +	ret = ls_pcie_host_init(pp);
> > +	if (ret)
> > +		return ret;
> > +
> > +	pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> > +	if (IS_ERR(pcie->scfg)) {
> > +		ret = PTR_ERR(pcie->scfg);
> > +		dev_err(dev, "No syscfg phandle specified\n");
> > +		pcie->scfg = NULL;
> > +		return ret;
> > +	}
> > +
> > +	ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
> > +	if (ret) {
> > +		pcie->scfg = NULL;
> > +		return ret;
> > +	}
> > +
> > +	pcie->index = index[1];
> > +
> 
> The above syscon parsing could be done conditionally during probe itself. There
> is no need to do it during host_init() time.
> 
> - Mani
> 
> > +	return ret;
> > +}
> > +
> >  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
> >  	.host_init = ls_pcie_host_init,
> >  	.pme_turn_off = ls_pcie_send_turnoff_msg,
> >  };
> >  
> > +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> > +	.host_init = ls1021a_pcie_host_init,
> > +	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> > +};
> > +
> >  static const struct ls_pcie_drvdata ls1021a_drvdata = {
> > -	.pm_support = false,
> > +	.pm_support = true,
> > +	.ops = &ls1021a_pcie_host_ops,
> > +	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
> >  };
> >  
> >  static const struct ls_pcie_drvdata layerscape_drvdata = {
> > -- 
> > 2.34.1
> > 
> 
> -- 
> மணிவண்ணன் சதாசிவம்