* [PATCH 3/3] Sysace: Don't enable IRQ until after interrupt handler is registered
From: Grant Likely @ 2007-10-04 4:13 UTC (permalink / raw)
To: jens.axboe, linux-kernel, linuxppc-dev
In-Reply-To: <20071004041114.20868.34605.stgit@trillian.cg.shawcable.net>
From: Grant Likely <grant.likely@secretlab.ca>
The previous patch to move the interrupt handler registration moved it
below enabling interrupts which could be a problem if the device is on
a shared interrupt line. This patch fixes the order.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
drivers/block/xsysace.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 5b73471..9e7652d 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1005,11 +1005,6 @@ static int __devinit ace_setup(struct ace_device *ace)
ace_out(ace, ACE_CTRL, ACE_CTRL_FORCECFGMODE |
ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ);
- /* Enable interrupts */
- val = ace_in(ace, ACE_CTRL);
- val |= ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ;
- ace_out(ace, ACE_CTRL, val);
-
/* Now we can hook up the irq handler */
if (ace->irq != NO_IRQ) {
rc = request_irq(ace->irq, ace_interrupt, 0, "systemace", ace);
@@ -1020,6 +1015,11 @@ static int __devinit ace_setup(struct ace_device *ace)
}
}
+ /* Enable interrupts */
+ val = ace_in(ace, ACE_CTRL);
+ val |= ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ;
+ ace_out(ace, ACE_CTRL, val);
+
/* Print the identification */
dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
(version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
^ permalink raw reply related
* [PATCH 1/3] Sysace: Minor coding convention fixup
From: Grant Likely @ 2007-10-04 4:13 UTC (permalink / raw)
To: jens.axboe, linux-kernel, linuxppc-dev
In-Reply-To: <20071004041114.20868.34605.stgit@trillian.cg.shawcable.net>
From: Grant Likely <grant.likely@secretlab.ca>
Put function call and return code test on separate lines.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
drivers/block/xsysace.c | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 3ea172b..3847464 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1091,7 +1091,8 @@ ace_alloc(struct device *dev, int id, unsigned long physaddr,
ace->bus_width = bus_width;
/* Call the setup code */
- if ((rc = ace_setup(ace)) != 0)
+ rc = ace_setup(ace);
+ if (rc)
goto err_setup;
dev_set_drvdata(dev, ace);
@@ -1253,11 +1254,13 @@ static int __init ace_init(void)
goto err_blk;
}
- if ((rc = ace_of_register()) != 0)
+ rc = ace_of_register();
+ if (rc)
goto err_of;
pr_debug("xsysace: registering platform binding\n");
- if ((rc = platform_driver_register(&ace_platform_driver)) != 0)
+ rc = platform_driver_register(&ace_platform_driver);
+ if (rc)
goto err_plat;
pr_info("Xilinx SystemACE device driver, major=%i\n", ace_major);
^ permalink raw reply related
* [PATCH 2/3] Sysace: sparse fixes
From: Grant Likely @ 2007-10-04 4:13 UTC (permalink / raw)
To: jens.axboe, linux-kernel, linuxppc-dev
In-Reply-To: <20071004041114.20868.34605.stgit@trillian.cg.shawcable.net>
From: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
drivers/block/xsysace.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 3847464..5b73471 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -195,7 +195,7 @@ struct ace_device {
/* Details of hardware device */
unsigned long physaddr;
- void *baseaddr;
+ void __iomem *baseaddr;
int irq;
int bus_width; /* 0 := 8 bit; 1 := 16 bit */
struct ace_reg_ops *reg_ops;
@@ -227,20 +227,20 @@ struct ace_reg_ops {
/* 8 Bit bus width */
static u16 ace_in_8(struct ace_device *ace, int reg)
{
- void *r = ace->baseaddr + reg;
+ void __iomem *r = ace->baseaddr + reg;
return in_8(r) | (in_8(r + 1) << 8);
}
static void ace_out_8(struct ace_device *ace, int reg, u16 val)
{
- void *r = ace->baseaddr + reg;
+ void __iomem *r = ace->baseaddr + reg;
out_8(r, val);
out_8(r + 1, val >> 8);
}
static void ace_datain_8(struct ace_device *ace)
{
- void *r = ace->baseaddr + 0x40;
+ void __iomem *r = ace->baseaddr + 0x40;
u8 *dst = ace->data_ptr;
int i = ACE_FIFO_SIZE;
while (i--)
@@ -250,7 +250,7 @@ static void ace_datain_8(struct ace_device *ace)
static void ace_dataout_8(struct ace_device *ace)
{
- void *r = ace->baseaddr + 0x40;
+ void __iomem *r = ace->baseaddr + 0x40;
u8 *src = ace->data_ptr;
int i = ACE_FIFO_SIZE;
while (i--)
^ permalink raw reply related
* [PATCH] Bootwrapper: Enable debug info on boot wrapper
From: Grant Likely @ 2007-10-04 4:05 UTC (permalink / raw)
To: linuxppc-dev, david, paulus
From: Grant Likely <grant.likely@secretlab.ca>
Add '-g' to BOOTCFLAGS if CONFIG_DEBUG_INFO is set.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/powerpc/boot/Makefile | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index cf80db3..9dfe79b 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -25,6 +25,10 @@ BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-isystem $(shell $(CROSS32CC) -print-file-name=include)
BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
+ifdef CONFIG_DEBUG_INFO
+BOOTCFLAGS += -g
+endif
+
ifeq ($(call cc-option-yn, -fstack-protector),y)
BOOTCFLAGS += -fno-stack-protector
endif
^ permalink raw reply related
* Re: [PATCH] fsl_spi_init: Support non-QE processors
From: Stephen Rothwell @ 2007-10-04 4:01 UTC (permalink / raw)
To: Peter Korsgaard; +Cc: linuxppc-dev
In-Reply-To: <87lkakxky1.fsf@macbook.be.48ers.dk>
[-- Attachment #1: Type: text/plain, Size: 453 bytes --]
On Wed, 03 Oct 2007 17:43:50 +0200 Peter Korsgaard <jacmet@sunsite.dk> wrote:
>
> @@ -1220,14 +1220,17 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
> {
> struct device_node *np;
> unsigned int i;
> - const u32 *sysclk;
> + const u32 *qe_sysclk = 0, *soc_sysclk = 0;
Please use NULL when referring to pointers.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* Re: [PATCH] Remove unused old code from powermac setup code
From: Benjamin Herrenschmidt @ 2007-10-04 3:56 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
In-Reply-To: <18180.25146.321019.568200@cargo.ozlabs.ibm.com>
On Thu, 2007-10-04 at 13:47 +1000, Paul Mackerras wrote:
> Since bootdevice never gets initialized, it's always NULL, and hence a
> whole pile of code in arch/powerpc/platforms/setup.c never gets used.
> (This was the code that originally was there so that the automatic
> root partition selection mechanism would prefer a rootish-looking
> partition on the device that OF loaded the kernel from over a similar
> partition on other devices.)
>
> This removes the unused code.
>
> Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
^ permalink raw reply
* [PATCH] Remove unused old code from powermac setup code
From: Paul Mackerras @ 2007-10-04 3:47 UTC (permalink / raw)
To: linuxppc-dev
Since bootdevice never gets initialized, it's always NULL, and hence a
whole pile of code in arch/powerpc/platforms/setup.c never gets used.
(This was the code that originally was there so that the automatic
root partition selection mechanism would prefer a rootish-looking
partition on the device that OF loaded the kernel from over a similar
partition on other devices.)
This removes the unused code.
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 7ccb923..c59a508 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -387,69 +387,13 @@ static void __init pmac_setup_arch(void)
#endif /* CONFIG_ADB */
}
-char *bootpath;
-char *bootdevice;
-void *boot_host;
-int boot_target;
-int boot_part;
-static dev_t boot_dev;
-
#ifdef CONFIG_SCSI
void note_scsi_host(struct device_node *node, void *host)
{
- int l;
- char *p;
-
- l = strlen(node->full_name);
- if (bootpath != NULL && bootdevice != NULL
- && strncmp(node->full_name, bootdevice, l) == 0
- && (bootdevice[l] == '/' || bootdevice[l] == 0)) {
- boot_host = host;
- /*
- * There's a bug in OF 1.0.5. (Why am I not surprised.)
- * If you pass a path like scsi/sd@1:0 to canon, it returns
- * something like /bandit@F2000000/gc@10/53c94@10000/sd@0,0
- * That is, the scsi target number doesn't get preserved.
- * So we pick the target number out of bootpath and use that.
- */
- p = strstr(bootpath, "/sd@");
- if (p != NULL) {
- p += 4;
- boot_target = simple_strtoul(p, NULL, 10);
- p = strchr(p, ':');
- if (p != NULL)
- boot_part = simple_strtoul(p + 1, NULL, 10);
- }
- }
}
EXPORT_SYMBOL(note_scsi_host);
#endif
-#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
-static dev_t __init find_ide_boot(void)
-{
- char *p;
- int n;
- dev_t __init pmac_find_ide_boot(char *bootdevice, int n);
-
- if (bootdevice == NULL)
- return 0;
- p = strrchr(bootdevice, '/');
- if (p == NULL)
- return 0;
- n = p - bootdevice;
-
- return pmac_find_ide_boot(bootdevice, n);
-}
-#endif /* CONFIG_BLK_DEV_IDE && CONFIG_BLK_DEV_IDE_PMAC */
-
-static void __init find_boot_device(void)
-{
-#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
- boot_dev = find_ide_boot();
-#endif
-}
-
static int initializing = 1;
static int pmac_late_init(void)
@@ -469,7 +413,6 @@ late_initcall(pmac_late_init);
/* can't be __init - can be called whenever a disk is first accessed */
void note_bootable_part(dev_t dev, int part, int goodness)
{
- static int found_boot = 0;
char *p;
if (!initializing)
@@ -481,15 +424,8 @@ void note_bootable_part(dev_t dev, int part, int goodness)
if (p != NULL && (p == boot_command_line || p[-1] == ' '))
return;
- if (!found_boot) {
- find_boot_device();
- found_boot = 1;
- }
- if (!boot_dev || dev == boot_dev) {
- ROOT_DEV = dev + part;
- boot_dev = 0;
- current_root_goodness = goodness;
- }
+ ROOT_DEV = dev + part;
+ current_root_goodness = goodness;
}
#ifdef CONFIG_ADB_CUDA
^ permalink raw reply related
* Re: [PATCH 2/5] Add initial MPC8610 HPCD Platform files.
From: Stephen Rothwell @ 2007-10-04 3:41 UTC (permalink / raw)
To: Jon Loeliger, Xianghua Xiao; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <1191442173.21463.77.camel@ld0161-tx32>
[-- Attachment #1: Type: text/plain, Size: 669 bytes --]
On Wed, 03 Oct 2007 15:09:33 -0500 Jon Loeliger <jdl@freescale.com> wrote:
>
> +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
> +#include <linux/stddef.h>
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +#include <linux/kdev_t.h>
> +#include <linux/delay.h>
> +#include <linux/seq_file.h>
> +
> +#include <asm/system.h>
> +#include <asm/time.h>
> +#include <asm/machdep.h>
> +#include <asm/pci-bridge.h>
> +#include <asm/mpc86xx.h>
> +#include <asm/prom.h>
You should include linux/of.h as well to use the of_ accessor functions.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* [PATCH] [POWERPC] Remove some section mismatch warnings
From: Stephen Rothwell @ 2007-10-04 2:00 UTC (permalink / raw)
To: paulus; +Cc: ppc-dev
>From g5_defconfig:
WARNING: vmlinux.o(.text+0x2ff5c): Section mismatch: reference to .init.text:.pmac_find_ide_boot (between '.note_bootable_part' and '.note_scsi_host')
>From holly_defconfig:
WARNING: vmlinux.o(.text+0x164fe): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')
WARNING: vmlinux.o(.text+0x16506): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')
>From linkstation_defconfig:
WARNING: vmlinux.o(.text+0x158fe): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')
WARNING: vmlinux.o(.text+0x15906): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')
>From mpc7448_hpc2_defconfig:
WARNING: vmlinux.o(.text+0x1583e): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')
WARNING: vmlinux.o(.text+0x15846): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')
>From pmac32_defconfig:
WARNING: vmlinux.o(.text+0x154ca): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'note_scsi_host')
WARNING: vmlinux.o(.text+0x154d2): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'note_scsi_host')
WARNING: vmlinux.o(.text+0x1553c): Section mismatch: reference to .init.text:pmac_find_ide_boot (between 'note_bootable_part' and 'note_scsi_host')
>From ppc64_defconfig:
WARNING: vmlinux.o(.text+0x3acdc): Section mismatch: reference to .init.text:.pmac_find_ide_boot (between '.note_bootable_part' and '.note_scsi_host')
>From prpmc2800_defconfig:
WARNING: vmlinux.o(.text+0x1611e): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')
WARNING: vmlinux.o(.text+0x16126): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/powerpc/platforms/powermac/setup.c | 9 +++++++--
1 files changed, 7 insertions(+), 2 deletions(-)
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 7ccb923..840f5b4 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -466,8 +466,13 @@ static int pmac_late_init(void)
late_initcall(pmac_late_init);
-/* can't be __init - can be called whenever a disk is first accessed */
-void note_bootable_part(dev_t dev, int part, int goodness)
+/*
+ * This is __init_refok because we check for "initializing" before
+ * touching any of the __init sensitive things and "initializing"
+ * will be false after __init time. This can't be __init because it
+ * can be called whenever a disk is first accessed.
+ */
+void __init_refok note_bootable_part(dev_t dev, int part, int goodness)
{
static int found_boot = 0;
char *p;
--
1.5.3.3
^ permalink raw reply related
* Re: [PATCH] SPI: Use fsl_spi instead of mpc83xx_spi
From: David Gibson @ 2007-10-04 1:54 UTC (permalink / raw)
To: Peter Korsgaard; +Cc: linuxppc-dev
In-Reply-To: <878x6kxk62.fsf@macbook.be.48ers.dk>
On Wed, Oct 03, 2007 at 06:00:37PM +0200, Peter Korsgaard wrote:
> >>>>> "Grant" == Grant Likely <grant.likely@secretlab.ca> writes:
>
> Hi,
>
> >> - compatible = "mpc83xx_spi";
> >> + compatible = "fsl_spi";
>
> Grant> Compatible is a list property; this might be more appropriate:
>
> Grant> compatible = "fsl,mpc8313_spi", "fsl_spi";
>
> Fine by me, I'm just following booting-without-of.txt.
Yeah, some of the older bits of booting-without-of.txt are a bit
crufty. There should certainly be a specific compatible value in the
list as well as the general "fsl_spi" one.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
^ permalink raw reply
* linux ethernet problem
From: jxnuxdy @ 2007-10-04 0:59 UTC (permalink / raw)
To: linuxppc-embedded
In-Reply-To: <9e4733910710031633v3bb409c9j32b345e12396c1b0@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 313 bytes --]
Hi, I use the 440epx CPU and bcm5241 PHY in my system, the ehternet works fine in u-boot, however I can't use the ethernet in linux if I didn't active the ehernet in u-boot(such as 'ping'... or 'tftp'...). Is there anyone even encounter such problem? is the issue due to my u-boot or linux? ,Regards- Denny
[-- Attachment #2: Type: text/html, Size: 805 bytes --]
^ permalink raw reply
* Re: Device tree and external RTC
From: Jon Smirl @ 2007-10-03 23:33 UTC (permalink / raw)
To: Bruce_Leonard@selinc.com; +Cc: linuxppc-embedded
In-Reply-To: <OF5A3A8901.AAC62E29-ON88257369.007F3E0B-88257369.007FC5D0@selinc.com>
On 10/3/07, Bruce_Leonard@selinc.com <Bruce_Leonard@selinc.com> wrote:
> I still think I've got a valid question about the device tree. Isn't the
> purpose of the device tree to completely describe the HW to the kernel?
> Shouldn't I be able to add a child node to the i2c node describing the
> M41T00 RTC and have the kernel figure out that there's an RTC hanging off
> the I2C bus? Or am I completely off base here?
I am having the same question about audio codecs. ALSA soc support is
designed to automatically load the right drivers depending on the
hardware in the device. Doesn't the device tree need to include the
codec chips? These chips are hooked up with various combinations of
i2s, ac97 and i2c.
--
Jon Smirl
jonsmirl@gmail.com
^ permalink raw reply
* Re: Device tree and external RTC
From: Bruce_Leonard @ 2007-10-03 23:15 UTC (permalink / raw)
To: Bruce_Leonard; +Cc: linuxppc-embedded
In-Reply-To: <OFFFD4BE8F.17F6E427-ON88257369.006D8651-88257369.00736D96@selinc.com>
linuxppc-embedded-bounces+brucle=selinc.com@ozlabs.org wrote on 10/03/2007
02:00:49 PM:
> Hi all,
>
> I'm seriously confused by how things are supposed to work now with
device
> trees on the PowerPC arch. I'm bringing up our custom HW which is
bassed
<HUGE snip>
Follow up:
Okay, I figured out that I was indeed reading the clock (should have been
using date command rather than hwclock command), so sorry for the noise.
So what is is that hwclock is trying to do that it's unhappy about?
I still think I've got a valid question about the device tree. Isn't the
purpose of the device tree to completely describe the HW to the kernel?
Shouldn't I be able to add a child node to the i2c node describing the
M41T00 RTC and have the kernel figure out that there's an RTC hanging off
the I2C bus? Or am I completely off base here?
Bruce
^ permalink raw reply
* Re: [PATCH] PPC 85xx failure with odd memory sizes and CONFIG_HIGHMEM
From: Kumar Gala @ 2007-10-03 22:48 UTC (permalink / raw)
To: Rune Torgersen; +Cc: linuxppc-embedded
In-Reply-To: <DCEAAC0833DD314AB0B58112AD99B93B037591FD@ismail.innsys.innovsys.com>
On Oct 3, 2007, at 4:45 PM, Rune Torgersen wrote:
>> From: Kumar Gala
>> The code would have to change to allow for 1G of lowmem.
>> Max lowmem with KERNELBASE @ 0xc000_0000 is 768M.
>
> Which is why I asked. On 82xx it is supported without a codechange by
> setting KERNELBASE to 0xa000_0000 in Kconfig menu (and also changing
> start of virtual mem, also done by config option).
we could make this work. Its just no one's griped about needing it
to date.
Its a bit of testing to make sure we respect the kernel config
changes and a slight be of code to handle using up to 1G TLB sizes on
e500v2 or greater.
- k
^ permalink raw reply
* Re: [PATCH v4] qe: miscellaneous code improvements and fixes to the QE library
From: Kumar Gala @ 2007-10-03 22:41 UTC (permalink / raw)
To: Timur Tabi; +Cc: linuxppc-dev, Stephen Hemminger, netdev
In-Reply-To: <4703D8B9.5080006@freescale.com>
On Oct 3, 2007, at 1:00 PM, Timur Tabi wrote:
> Stephen Hemminger wrote:
>
>> Separate the changes into individual patches to allow for better
>> comment/review
>> and bisection in case of regression.
>
> That would be too difficult. Some of the changes are single lines,
> and this patch has already been approved -- I just cross-posted to
> netdev because I made a few ucc_geth changes that can't be
> docoupled from the powerpc changes. A series of 18 patches would
> just be convoluted.
Normally I would agree, but at this point I'm not going to gripe too
much about it.
- k
^ permalink raw reply
* Re: [PATCH] fsl_spi_init: Support non-QE processors
From: Kumar Gala @ 2007-10-03 22:11 UTC (permalink / raw)
To: Peter Korsgaard; +Cc: linuxppc-dev@ozlabs.org list
In-Reply-To: <fa686aa40710031117x528e5afarb059d8f1c9eb3e7f@mail.gmail.com>
On Oct 3, 2007, at 1:17 PM, Grant Likely wrote:
> On 10/3/07, Peter Korsgaard <jacmet@sunsite.dk> wrote:
>>>>>>> "Grant" == Grant Likely <grant.likely@secretlab.ca> writes:
>>
>> Hi,
>>
>> Grant> Why not just:
>>
>> Grant> np = of_find_node_by_type(NULL, "qe");
>> Grant> + if (!np)
>> Grant> + np = of_find_node_by_type(NULL, "soc");
>> Grant> if (!np)
>> Grant> return -ENODEV;
>>
>> My first iteration did it like that, but then you don't get a -ENODEV
>> if the node is missing (and you'll end up using the wrong clock) and
>> it doesn't support processors with SPI on and off QE (if that
>> exists/will ever exist).
>
> Okay, but you should at least be able confine your determination of
> which sysclk value to use to one part of the function. Otherwise, it
> looks good.
Peter, can you respin this w/Grant's modification. I've grabbed the
other patches and applied them. waiting on this one.
- k
^ permalink raw reply
* Re: [PATCH 0/5] Add MPC8610 HPCD Base Port
From: Kumar Gala @ 2007-10-03 22:09 UTC (permalink / raw)
To: Jon Loeliger; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <1191442145.21463.73.camel@ld0161-tx32>
On Oct 3, 2007, at 3:09 PM, Jon Loeliger wrote:
> Kumar and Paul,
>
> These five patches add the base port for the newly
> introduced MPC8610 HPCD reference board. We would
> like to see these added to 2.6.24 if possible!
>
> Thanks,
> jdl
>
>
> arch/powerpc/boot/dts/mpc8610_hpcd.dts | 191 +++++
> arch/powerpc/configs/mpc8610_hpcd_defconfig | 1023 ++++++++++++++++
> +++++++++++
> arch/powerpc/platforms/86xx/Kconfig | 13 +
> arch/powerpc/platforms/86xx/Makefile | 1 +
> arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 267 +++++++
> arch/powerpc/sysdev/fsl_pci.c | 1 +
> include/linux/pci_ids.h | 1 +
> 7 files changed, 1497 insertions(+), 0 deletions(-)
applied.
- k
^ permalink raw reply
* RE: [PATCH] PPC 85xx failure with odd memory sizes and CONFIG_HIGHMEM
From: Rune Torgersen @ 2007-10-03 21:45 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-embedded
In-Reply-To: <0B763FCF-9EFD-48E5-B2D9-53EAB0396522@kernel.crashing.org>
> From: Kumar Gala
> The code would have to change to allow for 1G of lowmem.
> Max lowmem with KERNELBASE @ 0xc000_0000 is 768M.
Which is why I asked. On 82xx it is supported without a codechange by
setting KERNELBASE to 0xa000_0000 in Kconfig menu (and also changing
start of virtual mem, also done by config option).
^ permalink raw reply
* Re: Stdout console clogging => 300ms blocked
From: Hollis Blanchard @ 2007-10-03 20:49 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <8D433CD511BE4646B47F8B31C900818ECB97AF@kndmex01.barco.com>
On Tue, 02 Oct 2007 09:41:28 +0200, Willaert, Bernard wrote:
> System details:
> Freescale MPC8347@200MHz
> Kernel 2.6.18
>
> Problem:
> When we log debug output via the serial console on a multithreaded
> application, the console throughput may get clogged and then we
> experience a >300ms deadlock.
>
> Quick and dirty test program: threadtest.c:
> //----------------------------------------------------------------------
> -------------------------
> #include <pthread.h>
> #include <stdio.h>
> #include <sys/time.h>
>
> #define THREAD_DELAY 1000
>
> void* thread_1(void* unused)
> {
> while (1)
> {
> usleep(THREAD_DELAY);
> fprintf(stdout," <----- thread 1\n");
> }
> return NULL;
> }
>
> void* thread_2(void* unused)
> {
> static long ts_old;
> long ts;
> struct timeval tv;
>
> while (1)
> {
> usleep(THREAD_DELAY);
> fprintf(stdout," <----- thread 2\n");
>
> gettimeofday (&tv, NULL);
> ts = (tv.tv_sec * 1000L) + (tv.tv_usec / 1000L);
> if ((ts - ts_old) > 100)
> {
> fprintf(stdout, "!!!!!!!!!!! thread2 interval
> timeout = %d ms\n",(int)(ts - ts_old));
> }
> ts_old = ts;
> }
> return NULL;
>
> }
>
>
>
> int main()
> {
> pthread_t pthread_id_1, pthread_id_2;
>
> pthread_create(&pthread_id_1,NULL,&thread_1,NULL);
> pthread_create(&pthread_id_2,NULL,&thread_2,NULL);
> while (1)
> {
> }
> return 0;
>
> }
>
> //----------------------------------------------------------------------
> -------------------------
>
> Build command on our platform:
> powerpc-linux-uclibc-gcc threadtest.c -lpthread -o threadtest
> Execute: ./threadtest > /dev/console &
>
> Uboot settings for the serial console:
> consoledev=ttyS0
> baudrate=115200
> stdin=serial
> stdout=serial
> stderr=serial
> boot_go=setenv bootargs console=$consoledev,$baudrate $args_rtc
> $args_mtd $args_nfs $args_debug;bootm $addr_kernel $addr_root $addr_dtb
>
>
> Expected output [snippet] on the console:
> .... /\ ........
> <----- thread 1
> <----- thread 2
> <----- thread 1
> <----- thread 2
> <----- thread 1
> <----- thread 2
> <----- thread 1
> <----- thread 2
> <----- thread 1
> <----- thread 2
> <----- thread 1
> .... /\ ........
>
> Real output on the console:
>
> .... /\ ........
> <----- thread 1
> <----- thread 2
> <----- thread 1
> <----- thread 2
> <----- thread 1
> <----- thread 2
> !!!!!!!!!!! thread2 interval timeout = 335 ms
> <----- thread 1
> <----- thread 2
> <----- thread 1
> <----- thread 2
> <----- thread 1
> .... /\ ........
>
> This timeout shows up around every second and has always about the same
> value of 335 ms.
> Can somebody reproduce this behaviour ( the console speed and/or thread
> interval may have to be tweaked to clog the serial output) ?
> Thank you in advance for your help.
Could you not post HTML please? Thanks.
"Deadlock" means dead due to incorrect locking. Instead, you seem to be
talking about a momentary pause. :)
Are you saying that the problem does not occur when you do not use
/dev/console? What about /dev/ttyS0, or whatever your serial port device
is?
You're certain that this isn't simply a result of multitasking?
--
Hollis Blanchard
IBM Linux Technology Center
^ permalink raw reply
* Re: [PATCH 2 6/7] Uartlite: Add of-platform-bus binding
From: Benjamin Herrenschmidt @ 2007-10-03 21:21 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev
In-Reply-To: <fa686aa40710030739k13e05571l7063aa635a8727dc@mail.gmail.com>
On Wed, 2007-10-03 at 08:39 -0600, Grant Likely wrote:
> Right, okay. Looking at platform_device_add(), the default parent is
> platform_bus, but it can be overridden. of_platform_bus devices get
> the hierarchy of the device tree by default. So in the platform bus
> case, the constructor would need to explicitly set the parent device?
> Correct?
>
> Also, how do you see the constructor code getting executed? Called
> explicitly from the platform code, or some form of auto binding? I
> look at fsl_soc.c and I shudder as each constructor does a pass of the
> whole tree looking for compatible nodes.
My idea was to have some platform code at boot walk the DT and call the
constructors on the way, passing them the parent. Constructors return a
struct device * so it would keep track of who is where.
Drivers or platform code can then register constructors along with of
match tables.
Ben.
^ permalink raw reply
* Device tree and external RTC
From: Bruce_Leonard @ 2007-10-03 21:00 UTC (permalink / raw)
To: linuxppc-embedded
Hi all,
I'm seriously confused by how things are supposed to work now with device
trees on the PowerPC arch. I'm bringing up our custom HW which is bassed
on the mpc8347e, with an m41t00 RTC hanging off the i2c bus, U-boot is
1.2.0, kernel is 2.6.22. My problem is I can't get the kernel to access
the RTC. It works fine in U-boot, but nothing in the kernel.
Where I get confused is I'm not sure if this is something that the device
tree is supposed to be telling the kernel about or if it's something that
the kernel should probe for. I've turned on everything in Kconfig I can
find for I2C and RTC. Here's what I think are the relavant parts of
.config:
<snip># CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_I810=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_MPC=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_PROSAVAGE=y
# CONFIG_I2C_SAVAGE4 is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
CONFIG_I2C_VOODOO3=y
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_SENSORS_M41T00=y
# CONFIG_SENSORS_MAX6875 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
<snip>
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
However, I get the following error when I run hwclock --debug:
hwclock from util-linux-2.12r
hwclock: Open of /dev/rtc failed, errno=19: No such device. (note that
the device is present with a major of 10 and a minor of 135)
No usable clock interface found.
Cannot access the Hardware Clock via any known method.
When I dump out ppc_md, all the RTC functions (i.e., get_rtc_time,
read_rtc_val, etc.) are all NULL.
I've searched through all the device tree files that come with the kernel
and I can't find any that explicitly show an external device as a child
node to a SoC I2C controller but it sure seems to me that the purpose of
the device tree is to describe to the kernel all the hardware in the
system. Therefore it seems to me that there should be something like the
following in the device tree:
<snip>
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = < &ipic >;
dfsrr;
rtc@54 {
device_type = "rtc";
something;
something;
something;
}
}
<snip>
I've googled for "device tree & rtc" and various other things that haven't
poped out anything that really gives me any direction and
booting_without_of.txt doesn't really help me very much because I think
I'm just too dumb to understand it :-\. (Took me two days to understand
the ranges filed for the PCI node :( ).
So, long winded way to get to it: Am I missing something in Kconfig for
the kernel or am I missing something in the device tree? Also, is there
any place where things like the "dfsrr" attribute in the above device tree
are described/defined? I have no idea what that's supposed to mean and
conversly I don't know what things are acceptable. For example, if I need
a RTC node in my device tree, what are the required attributes and what
should the be set to? Any direction as to where I should be looking to
figure this sort of stuff out is greatly appreciated.
Sorry for the length of this post and thanks for any direction that can be
provided.
Bruce
^ permalink raw reply
* Re: [PATCH] PPC 85xx failure with odd memory sizes and CONFIG_HIGHMEM
From: Kumar Gala @ 2007-10-03 20:49 UTC (permalink / raw)
To: Rune Torgersen; +Cc: linuxppc-embedded
In-Reply-To: <DCEAAC0833DD314AB0B58112AD99B93B0371EFE9@ismail.innsys.innovsys.com>
On Oct 3, 2007, at 2:34 PM, Rune Torgersen wrote:
>> From: Dale Farnsworth
>>
>> The CONFIG_FSL_BOOKE mmu setup code fails when CONFIG_HIGHMEM=y
>> and the 3 fixed TLB entries cannot exactly map the lowmem size.
>> Each TLB entry can map 4MB, 16MB, 64MB or 256MB, so the failure
>> is observed when the kernel lowmem size is not equal to the
>> sum of up to 3 of those values.
>
> Does this mean you cannot run 1G of lowmem on a 85xx?
>
> On 82xx I run 1G of lowmem, and when we finaly upgrade our product
> to a
> 85xx something, Iw was planning on doing the same.
The code would have to change to allow for 1G of lowmem.
Max lowmem with KERNELBASE @ 0xc000_0000 is 768M.
- k
^ permalink raw reply
* Re: [PATCH 08/10] bootwrapper: Add a firmware-independent "raw" target.
From: Grant Likely @ 2007-10-03 20:29 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
In-Reply-To: <20070905192116.GH32113@ld0162-tx32.am.freescale.net>
On 9/5/07, Scott Wood <scottwood@freescale.com> wrote:
> This target produces a flat binary rather than an ELF file,
> fixes the entry point at the beginning of the image, and takes
> a complete device tree with no fixups needed.
>
> The device tree must have labels on /#address-cells, the timebase
> frequency, and the memory size.
Scott,
Are you planning to address the comments on this patch and resubmit in
time for the 2.6.24 merge window? The raw platform is quite useful
for Xilinx Virtex support, so I'd really like to see it get merged.
Thanks,
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
^ permalink raw reply
* [PATCH 5/5] Add initial MPC8610 HPCD defconfig file.
From: Jon Loeliger @ 2007-10-03 20:10 UTC (permalink / raw)
To: linuxppc-dev@ozlabs.org
From: Xianghua Xiao <x.xiao@freescale.com>
Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
arch/powerpc/configs/mpc8610_hpcd_defconfig | 1023 +++++++++++++++++++++++++++
1 files changed, 1023 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/configs/mpc8610_hpcd_defconfig
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
new file mode 100644
index 0000000..de19b78
--- /dev/null
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -0,0 +1,1023 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6
+# Tue Oct 2 11:42:56 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPC8641_HPCN is not set
+CONFIG_MPC8610_HPCD=y
+CONFIG_MPC8610=y
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_SECCOMP is not set
+# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_DEBUG=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+# CONFIG_BLK_DEV_IDE is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+CONFIG_PATA_ALI=y
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
--
1.5.3
^ permalink raw reply related
* [PATCH 4/5] Add initial MPC8610 HPCD Kconfig and Makefiles.
From: Jon Loeliger @ 2007-10-03 20:09 UTC (permalink / raw)
To: linuxppc-dev@ozlabs.org
From: Xianghua Xiao <x.xiao@freescale.com>
Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
arch/powerpc/platforms/86xx/Kconfig | 13 +++++++++++++
arch/powerpc/platforms/86xx/Makefile | 1 +
2 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 685b2fb..21d1135 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -11,6 +11,12 @@ config MPC8641_HPCN
help
This option enables support for the MPC8641 HPCN board.
+config MPC8610_HPCD
+ bool "Freescale MPC8610 HPCD"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the MPC8610 HPCD board.
+
endchoice
config MPC8641
@@ -19,3 +25,10 @@ config MPC8641
select PPC_UDBG_16550
select MPIC
default y if MPC8641_HPCN
+
+config MPC8610
+ bool
+ select FSL_PCI if PCI
+ select PPC_UDBG_16550
+ select MPIC
+ default y if MPC8610_HPCD
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 3376c77..c967063 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_SMP) += mpc86xx_smp.o
obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o
+obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o
--
1.5.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox