* Where are inb/outb macros?
From: Peter Lemenkov @ 2007-10-06 20:47 UTC (permalink / raw)
To: linuxppc-dev
Hello All!
I can't compile one small software title because of lack <sys/io.h>
and inb/outb macros. What sould I do to overcome this obstacle?
My linux distro is Fedora 7 if it is matter.
--
With best regards!
^ permalink raw reply
* Re: Where are inb/outb macros?
From: Benjamin Herrenschmidt @ 2007-10-06 21:08 UTC (permalink / raw)
To: Peter Lemenkov; +Cc: linuxppc-dev
In-Reply-To: <adf480660710061347l59903ba6vf6b327db674606a9@mail.gmail.com>
On Sun, 2007-10-07 at 00:47 +0400, Peter Lemenkov wrote:
> Hello All!
> I can't compile one small software title because of lack <sys/io.h>
> and inb/outb macros. What sould I do to overcome this obstacle?
>
> My linux distro is Fedora 7 if it is matter.
They don't exist in user space on non-x86. You have to do things
differently. What is your software trying to do ? If it's trying to
access a PCI device IO space, you probably want to mmap it in sysfs and
write your own accessors with appropriate memory barriers.
Ben
^ permalink raw reply
* [patch 5/6] PS3: Save os-area params to device tree
From: geoffrey.levand @ 2007-10-06 21:35 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
In-Reply-To: <20071006213542.311447584@am.sony.com>
Add the PS3 os-area startup params to the device tree. This allows
a second stage kernel loaded with kexec to use these values.
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
---
arch/powerpc/platforms/ps3/os-area.c | 104 +++++++++++++++++++++++++++++++++-
arch/powerpc/platforms/ps3/platform.h | 1
arch/powerpc/platforms/ps3/setup.c | 1
3 files changed, 104 insertions(+), 2 deletions(-)
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -119,10 +119,65 @@ struct os_area_params {
*/
struct saved_params {
+ unsigned int valid;
s64 rtc_diff;
unsigned int av_multi_out;
} static saved_params;
+static struct property property_rtc_diff = {
+ .name = "linux,rtc_diff",
+ .length = sizeof(saved_params.rtc_diff),
+ .value = &saved_params.rtc_diff,
+};
+
+static struct property property_av_multi_out = {
+ .name = "linux,av_multi_out",
+ .length = sizeof(saved_params.av_multi_out),
+ .value = &saved_params.av_multi_out,
+};
+
+/**
+ * os_area_set_property - Add or overwrite a saved_params value to the device tree.
+ *
+ * Overwrites an existing property.
+ */
+
+static void os_area_set_property(struct device_node *node,
+ struct property *prop)
+{
+ int result;
+ struct property *tmp = of_find_property(node, prop->name, NULL);
+
+ if (tmp) {
+ pr_debug("%s:%d found %s\n", __func__, __LINE__, prop->name);
+ prom_remove_property(node, tmp);
+ }
+
+ result = prom_add_property(node, prop);
+
+ if (result)
+ pr_debug("%s:%d prom_set_property failed\n", __func__,
+ __LINE__);
+}
+
+/**
+ * os_area_get_property - Get a saved_params value from the device tree.
+ *
+ */
+
+static void __init os_area_get_property(struct device_node *node,
+ struct property *prop)
+{
+ const struct property *tmp = of_find_property(node, prop->name, NULL);
+
+ if (tmp) {
+ BUG_ON(prop->length != tmp->length);
+ memcpy(prop->value, tmp->value, prop->length);
+ } else
+ pr_debug("%s:%d not found %s\n", __func__, __LINE__,
+ prop->name);
+}
+
#define dump_header(_a) _dump_header(_a, __func__, __LINE__)
static void _dump_header(const struct os_area_header *h, const char *func,
int line)
@@ -196,8 +251,19 @@ static int __init verify_header(const st
static void os_area_queue_work_handler(struct work_struct *work)
{
+ struct device_node *node;
+
pr_debug(" -> %s:%d\n", __func__, __LINE__);
+ node = of_find_node_by_path("/");
+
+ if (node) {
+ os_area_set_property(node, &property_rtc_diff);
+ of_node_put(node);
+ } else
+ pr_debug("%s:%d of_find_node_by_path failed\n",
+ __func__, __LINE__);
+
pr_debug(" <- %s:%d\n", __func__, __LINE__);
}
@@ -244,6 +310,8 @@ void __init ps3_os_area_save_params(void
result = verify_header(header);
if (result) {
+ /* Second stage kernels exit here. */
+
pr_debug("%s:%d verify_header failed\n", __func__, __LINE__);
dump_header(header);
return;
@@ -254,6 +322,7 @@ void __init ps3_os_area_save_params(void
saved_params.rtc_diff = params->rtc_diff;
saved_params.av_multi_out = params->av_multi_out;
+ saved_params.valid = 1;
memset(header, 0, sizeof(*header));
@@ -261,13 +330,44 @@ void __init ps3_os_area_save_params(void
}
/**
+ * ps3_os_area_init - Setup os area device tree properties as needed.
+ */
+
+void __init ps3_os_area_init(void)
+{
+ struct device_node *node;
+
+ pr_debug(" -> %s:%d\n", __func__, __LINE__);
+
+ node = of_find_node_by_path("/");
+
+ if (!saved_params.valid && node) {
+ /* Second stage kernels should have a dt entry. */
+ os_area_get_property(node, &property_rtc_diff);
+ os_area_get_property(node, &property_av_multi_out);
+ }
+
+ if(!saved_params.rtc_diff)
+ saved_params.rtc_diff = SECONDS_FROM_1970_TO_2000;
+
+ if (node) {
+ os_area_set_property(node, &property_rtc_diff);
+ os_area_set_property(node, &property_av_multi_out);
+ of_node_put(node);
+ } else
+ pr_debug("%s:%d of_find_node_by_path failed\n",
+ __func__, __LINE__);
+
+ pr_debug(" <- %s:%d\n", __func__, __LINE__);
+}
+
+/**
* ps3_os_area_get_rtc_diff - Returns the rtc diff value.
*/
u64 ps3_os_area_get_rtc_diff(void)
{
- return saved_params.rtc_diff ? saved_params.rtc_diff
- : SECONDS_FROM_1970_TO_2000;
+ return saved_params.rtc_diff;
}
/**
--- a/arch/powerpc/platforms/ps3/platform.h
+++ b/arch/powerpc/platforms/ps3/platform.h
@@ -63,6 +63,7 @@ int ps3_set_rtc_time(struct rtc_time *ti
/* os area */
void __init ps3_os_area_save_params(void);
+void __init ps3_os_area_init(void);
u64 ps3_os_area_get_rtc_diff(void);
void ps3_os_area_set_rtc_diff(u64 rtc_diff);
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -206,6 +206,7 @@ static void __init ps3_setup_arch(void)
prealloc_ps3flash_bounce_buffer();
ppc_md.power_save = ps3_power_save;
+ ps3_os_area_init();
DBG(" <- %s:%d\n", __func__, __LINE__);
}
--
^ permalink raw reply
* [patch 1/6] PS3: Cleanup of os-area.c
From: geoffrey.levand @ 2007-10-06 21:35 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
In-Reply-To: <20071006213542.311447584@am.sony.com>
Minor cleanup of the PS3 file os-area.c:
o Correct file text header.
o Add type names enum os_area_ldr_format, enum os_area_boot_flag,
enum os_area_ctrl_button.
o Change struct os_area_header.magic_num type to u8.
o Add preprocessor macro SECONDS_FROM_1970_TO_2000.
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
---
arch/powerpc/platforms/ps3/os-area.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -1,5 +1,5 @@
/*
- * PS3 'Other OS' area data.
+ * PS3 flash memory os area.
*
* Copyright (C) 2006 Sony Computer Entertainment Inc.
* Copyright 2006 Sony Corp.
@@ -29,7 +29,7 @@ enum {
OS_AREA_SEGMENT_SIZE = 0X200,
};
-enum {
+enum os_area_ldr_format {
HEADER_LDR_FORMAT_RAW = 0,
HEADER_LDR_FORMAT_GZIP = 1,
};
@@ -50,7 +50,7 @@ enum {
*/
struct os_area_header {
- s8 magic_num[16];
+ u8 magic_num[16];
u32 hdr_version;
u32 os_area_offset;
u32 ldr_area_offset;
@@ -60,12 +60,12 @@ struct os_area_header {
u32 _reserved_2[6];
};
-enum {
+enum os_area_boot_flag {
PARAM_BOOT_FLAG_GAME_OS = 0,
PARAM_BOOT_FLAG_OTHER_OS = 1,
};
-enum {
+enum os_area_ctrl_button {
PARAM_CTRL_BUTTON_O_IS_YES = 0,
PARAM_CTRL_BUTTON_X_IS_YES = 1,
};
@@ -84,6 +84,9 @@ enum {
* @dns_primary: User preference of static primary dns server.
* @dns_secondary: User preference of static secondary dns server.
*
+ * The ps3 rtc maintains a read-only value that approximates seconds since
+ * 2000-01-01 00:00:00 UTC.
+ *
* User preference of zero for static_ip_addr means use dhcp.
*/
@@ -108,6 +111,8 @@ struct os_area_params {
u8 _reserved_5[8];
};
+#define SECONDS_FROM_1970_TO_2000 946684800LL
+
/**
* struct saved_params - Static working copies of data from the 'Other OS' area.
*
@@ -213,7 +218,8 @@ int __init ps3_os_area_init(void)
}
header = (struct os_area_header *)__va(lpar_addr);
- params = (struct os_area_params *)__va(lpar_addr + OS_AREA_SEGMENT_SIZE);
+ params = (struct os_area_params *)__va(lpar_addr
+ + OS_AREA_SEGMENT_SIZE);
result = verify_header(header);
@@ -238,16 +244,13 @@ int __init ps3_os_area_init(void)
}
/**
- * ps3_os_area_rtc_diff - Returns the ps3 rtc diff value.
- *
- * The ps3 rtc maintains a value that approximates seconds since
- * 2000-01-01 00:00:00 UTC. Returns the exact number of seconds from 1970 to
- * 2000 when saved_params.rtc_diff has not been properly set up.
+ * ps3_os_area_rtc_diff - Returns the rtc diff value.
*/
u64 ps3_os_area_rtc_diff(void)
{
- return saved_params.rtc_diff ? saved_params.rtc_diff : 946684800UL;
+ return saved_params.rtc_diff ? saved_params.rtc_diff
+ : SECONDS_FROM_1970_TO_2000;
}
/**
--
^ permalink raw reply
* [patch 0/6] PS3 os area patches for 2.6.24
From: geoffrey.levand @ 2007-10-06 21:35 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
Paul,
This is a small set of patches that reworks and improves
the 'other os' area of the PS3's flash rom.
Please apply for 2.6.24.
-Geoff
--
^ permalink raw reply
* [patch 2/6] PS3: Remove unused os-area params
From: geoffrey.levand @ 2007-10-06 21:35 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
In-Reply-To: <20071006213542.311447584@am.sony.com>
Updates for PS3 os-area startup params
o Remove some unused PS3 os-area startup params from struct saved_params.
o Rename ps3_os_area_init() to ps3_os_area_save_params().
o Zero mirrored header after saving params.
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
---
arch/powerpc/platforms/ps3/os-area.c | 44 ++++++++++++++--------------------
arch/powerpc/platforms/ps3/platform.h | 2 -
arch/powerpc/platforms/ps3/setup.c | 2 -
3 files changed, 21 insertions(+), 27 deletions(-)
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -114,27 +114,12 @@ struct os_area_params {
#define SECONDS_FROM_1970_TO_2000 946684800LL
/**
- * struct saved_params - Static working copies of data from the 'Other OS' area.
- *
- * For the convinience of the guest, the HV makes a copy of the 'Other OS' area
- * in flash to a high address in the boot memory region and then puts that RAM
- * address and the byte count into the repository for retreval by the guest.
- * We copy the data we want into a static variable and allow the memory setup
- * by the HV to be claimed by the lmb manager.
+ * struct saved_params - Static working copies of data from the PS3 'os area'.
*/
struct saved_params {
- /* param 0 */
s64 rtc_diff;
unsigned int av_multi_out;
- unsigned int ctrl_button;
- /* param 1 */
- u8 static_ip_addr[4];
- u8 network_mask[4];
- u8 default_gateway[4];
- /* param 2 */
- u8 dns_primary[4];
- u8 dns_secondary[4];
} static saved_params;
#define dump_header(_a) _dump_header(_a, __func__, __LINE__)
@@ -201,7 +186,17 @@ static int __init verify_header(const st
return 0;
}
-int __init ps3_os_area_init(void)
+/**
+ * ps3_os_area_save_params - Copy data from os area mirror to @saved_params.
+ *
+ * For the convenience of the guest, the HV makes a copy of the os area in
+ * flash to a high address in the boot memory region and then puts that RAM
+ * address and the byte count into the repository for retreval by the guest.
+ * We copy the data we want into a static variable and allow the memory setup
+ * by the HV to be claimed by the lmb manager.
+ */
+
+void __init ps3_os_area_save_params(void)
{
int result;
u64 lpar_addr;
@@ -209,12 +204,14 @@ int __init ps3_os_area_init(void)
struct os_area_header *header;
struct os_area_params *params;
+ pr_debug(" -> %s:%d\n", __func__, __LINE__);
+
result = ps3_repository_read_boot_dat_info(&lpar_addr, &size);
if (result) {
pr_debug("%s:%d ps3_repository_read_boot_dat_info failed\n",
__func__, __LINE__);
- return result;
+ return;
}
header = (struct os_area_header *)__va(lpar_addr);
@@ -226,7 +223,7 @@ int __init ps3_os_area_init(void)
if (result) {
pr_debug("%s:%d verify_header failed\n", __func__, __LINE__);
dump_header(header);
- return -EIO;
+ return;
}
dump_header(header);
@@ -234,13 +231,10 @@ int __init ps3_os_area_init(void)
saved_params.rtc_diff = params->rtc_diff;
saved_params.av_multi_out = params->av_multi_out;
- saved_params.ctrl_button = params->ctrl_button;
- memcpy(saved_params.static_ip_addr, params->static_ip_addr, 4);
- memcpy(saved_params.network_mask, params->network_mask, 4);
- memcpy(saved_params.default_gateway, params->default_gateway, 4);
- memcpy(saved_params.dns_secondary, params->dns_secondary, 4);
- return result;
+ memset(header, 0, sizeof(*header));
+
+ pr_debug(" <- %s:%d\n", __func__, __LINE__);
}
/**
--- a/arch/powerpc/platforms/ps3/platform.h
+++ b/arch/powerpc/platforms/ps3/platform.h
@@ -62,7 +62,7 @@ int ps3_set_rtc_time(struct rtc_time *ti
/* os area */
-int __init ps3_os_area_init(void);
+void __init ps3_os_area_save_params(void);
u64 ps3_os_area_rtc_diff(void);
/* spu */
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -228,7 +228,7 @@ static int __init ps3_probe(void)
powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE;
- ps3_os_area_init();
+ ps3_os_area_save_params();
ps3_mm_init();
ps3_mm_vas_create(&htab_size);
ps3_hpte_init(htab_size);
--
^ permalink raw reply
* [patch 3/6] PS3: os-area workqueue processing
From: geoffrey.levand @ 2007-10-06 21:35 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
In-Reply-To: <20071006213542.311447584@am.sony.com>
Add a workqueue to the PS3 os-area support. This is needed to
support writing updates to flash memory and to update the /proc
device tree entries from the timer tick interrupt context.
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
---
arch/powerpc/platforms/ps3/os-area.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -20,6 +20,7 @@
#include <linux/kernel.h>
#include <linux/io.h>
+#include <linux/workqueue.h>
#include <asm/lmb.h>
@@ -187,6 +188,28 @@ static int __init verify_header(const st
}
/**
+ * os_area_queue_work_handler - Asynchronous write handler.
+ *
+ * An asynchronous write for flash memory and the device tree. Do not
+ * call directly, use os_area_queue_work().
+ */
+
+static void os_area_queue_work_handler(struct work_struct *work)
+{
+ pr_debug(" -> %s:%d\n", __func__, __LINE__);
+
+ pr_debug(" <- %s:%d\n", __func__, __LINE__);
+}
+
+static void os_area_queue_work(void)
+{
+ static DECLARE_WORK(q, os_area_queue_work_handler);
+
+ wmb();
+ schedule_work(&q);
+}
+
+/**
* ps3_os_area_save_params - Copy data from os area mirror to @saved_params.
*
* For the convenience of the guest, the HV makes a copy of the os area in
--
^ permalink raw reply
* [patch 6/6] PS3: Add os-area database routines
From: geoffrey.levand @ 2007-10-06 21:35 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
In-Reply-To: <20071006213542.311447584@am.sony.com>
Add support for a simple tagged database in the PS3 flash rom
os-area. The database allows the flash rom os-area to be shared
between a bootloder and installed operating systems. The
application ps3-flash-util or the library libps3-utils from the
ps3-utils package can be used for userspace database operations.
The latest ps3-utils package is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-utils.git
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
---
arch/powerpc/platforms/ps3/os-area.c | 422 +++++++++++++++++++++++++++++++++--
1 file changed, 408 insertions(+), 14 deletions(-)
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -21,6 +21,8 @@
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/workqueue.h>
+#include <linux/fs.h>
+#include <linux/syscalls.h>
#include <asm/lmb.h>
@@ -39,7 +41,7 @@ enum os_area_ldr_format {
* struct os_area_header - os area header segment.
* @magic_num: Always 'cell_ext_os_area'.
* @hdr_version: Header format version number.
- * @os_area_offset: Starting segment number of os image area.
+ * @db_area_offset: Starting segment number of other os database area.
* @ldr_area_offset: Starting segment number of bootloader image area.
* @ldr_format: HEADER_LDR_FORMAT flag.
* @ldr_size: Size of bootloader image in bytes.
@@ -53,7 +55,7 @@ enum os_area_ldr_format {
struct os_area_header {
u8 magic_num[16];
u32 hdr_version;
- u32 os_area_offset;
+ u32 db_area_offset;
u32 ldr_area_offset;
u32 _reserved_1;
u32 ldr_format;
@@ -112,10 +114,91 @@ struct os_area_params {
u8 _reserved_5[8];
};
+/**
+ * struct os_area_db - Shared flash memory database.
+ * @magic_num: Always '-db-' = 0x2d64622d.
+ * @version: os_area_db format version number.
+ * @index_64: byte offset of the database id index for 64 bit variables.
+ * @count_64: number of usable 64 bit index entries
+ * @index_32: byte offset of the database id index for 32 bit variables.
+ * @count_32: number of usable 32 bit index entries
+ * @index_16: byte offset of the database id index for 16 bit variables.
+ * @count_16: number of usable 16 bit index entries
+ *
+ * Flash rom storage for exclusive use by guests running in the other os lpar.
+ * The current system configuration allocates 1K (two segments) for other os
+ * use.
+ */
+
+struct os_area_db {
+ u32 magic_num;
+ u16 version;
+ u16 _reserved_1;
+ u16 index_64;
+ u16 count_64;
+ u16 index_32;
+ u16 count_32;
+ u16 index_16;
+ u16 count_16;
+ u32 _reserved_2;
+ u8 _reserved_3[1000];
+};
+
+/**
+ * enum os_area_db_owner - Data owners.
+ */
+
+enum os_area_db_owner {
+ OS_AREA_DB_OWNER_ANY = -1,
+ OS_AREA_DB_OWNER_NONE = 0,
+ OS_AREA_DB_OWNER_PROTOTYPE = 1,
+ OS_AREA_DB_OWNER_LINUX = 2,
+ OS_AREA_DB_OWNER_PETITBOOT = 3,
+ OS_AREA_DB_OWNER_MAX = 32,
+};
+
+enum os_area_db_key {
+ OS_AREA_DB_KEY_ANY = -1,
+ OS_AREA_DB_KEY_NONE = 0,
+ OS_AREA_DB_KEY_RTC_DIFF = 1,
+ OS_AREA_DB_KEY_VIDEO_MODE = 2,
+ OS_AREA_DB_KEY_MAX = 8,
+};
+
+struct os_area_db_id {
+ int owner;
+ int key;
+};
+
+static const struct os_area_db_id os_area_db_id_empty = {
+ .owner = OS_AREA_DB_OWNER_NONE,
+ .key = OS_AREA_DB_KEY_NONE
+};
+
+static const struct os_area_db_id os_area_db_id_any = {
+ .owner = OS_AREA_DB_OWNER_ANY,
+ .key = OS_AREA_DB_KEY_ANY
+};
+
+static const struct os_area_db_id os_area_db_id_rtc_diff = {
+ .owner = OS_AREA_DB_OWNER_LINUX,
+ .key = OS_AREA_DB_KEY_RTC_DIFF
+};
+
+static const struct os_area_db_id os_area_db_id_video_mode = {
+ .owner = OS_AREA_DB_OWNER_LINUX,
+ .key = OS_AREA_DB_KEY_VIDEO_MODE
+};
+
#define SECONDS_FROM_1970_TO_2000 946684800LL
/**
* struct saved_params - Static working copies of data from the PS3 'os area'.
+ *
+ * The order of preference we use for the rtc_diff source:
+ * 1) The database value.
+ * 2) The game os value.
+ * 3) The number of seconds from 1970 to 2000.
*/
struct saved_params {
@@ -182,17 +265,17 @@ static void __init os_area_get_property(
static void _dump_header(const struct os_area_header *h, const char *func,
int line)
{
- pr_debug("%s:%d: h.magic_num: '%s'\n", func, line,
+ pr_debug("%s:%d: h.magic_num: '%s'\n", func, line,
h->magic_num);
- pr_debug("%s:%d: h.hdr_version: %u\n", func, line,
+ pr_debug("%s:%d: h.hdr_version: %u\n", func, line,
h->hdr_version);
- pr_debug("%s:%d: h.os_area_offset: %u\n", func, line,
- h->os_area_offset);
+ pr_debug("%s:%d: h.db_area_offset: %u\n", func, line,
+ h->db_area_offset);
pr_debug("%s:%d: h.ldr_area_offset: %u\n", func, line,
h->ldr_area_offset);
- pr_debug("%s:%d: h.ldr_format: %u\n", func, line,
+ pr_debug("%s:%d: h.ldr_format: %u\n", func, line,
h->ldr_format);
- pr_debug("%s:%d: h.ldr_size: %xh\n", func, line,
+ pr_debug("%s:%d: h.ldr_size: %xh\n", func, line,
h->ldr_size);
}
@@ -222,7 +305,7 @@ static void _dump_params(const struct os
p->dns_secondary[2], p->dns_secondary[3]);
}
-static int __init verify_header(const struct os_area_header *header)
+static int verify_header(const struct os_area_header *header)
{
if (memcmp(header->magic_num, "cell_ext_os_area", 16)) {
pr_debug("%s:%d magic_num failed\n", __func__, __LINE__);
@@ -234,7 +317,7 @@ static int __init verify_header(const st
return -1;
}
- if (header->os_area_offset > header->ldr_area_offset) {
+ if (header->db_area_offset > header->ldr_area_offset) {
pr_debug("%s:%d offsets failed\n", __func__, __LINE__);
return -1;
}
@@ -242,6 +325,303 @@ static int __init verify_header(const st
return 0;
}
+static int db_verify(const struct os_area_db *db)
+{
+ if (db->magic_num != 0x2d64622dU) {
+ pr_debug("%s:%d magic_num failed\n", __func__, __LINE__);
+ return -1;
+ }
+
+ if (db->version != 1) {
+ pr_debug("%s:%d version failed\n", __func__, __LINE__);
+ return -1;
+ }
+
+ return 0;
+}
+
+struct db_index {
+ uint8_t owner:5;
+ uint8_t key:3;
+};
+
+struct db_iterator {
+ const struct os_area_db *db;
+ struct os_area_db_id match_id;
+ struct db_index *idx;
+ struct db_index *last_idx;
+ union {
+ uint64_t *value_64;
+ uint32_t *value_32;
+ uint16_t *value_16;
+ };
+};
+
+static unsigned int db_align_up(unsigned int val, unsigned int size)
+{
+ return (val + (size - 1)) & (~(size - 1));
+}
+
+/**
+ * db_for_each_64 - Iterator for 64 bit entries.
+ *
+ * A NULL value for id can be used to match all entries.
+ * OS_AREA_DB_OWNER_ANY and OS_AREA_DB_KEY_ANY can be used to match all.
+ */
+
+static int db_for_each_64(const struct os_area_db *db,
+ const struct os_area_db_id *match_id, struct db_iterator *i)
+{
+next:
+ if (!i->db) {
+ i->db = db;
+ i->match_id = match_id ? *match_id : os_area_db_id_any;
+ i->idx = (void *)db + db->index_64;
+ i->last_idx = i->idx + db->count_64;
+ i->value_64 = (void *)db + db->index_64
+ + db_align_up(db->count_64, 8);
+ } else {
+ i->idx++;
+ i->value_64++;
+ }
+
+ if (i->idx >= i->last_idx) {
+ pr_debug("%s:%d: reached end\n", __func__, __LINE__);
+ return 0;
+ }
+
+ if (i->match_id.owner != OS_AREA_DB_OWNER_ANY
+ && i->match_id.owner != (int)i->idx->owner)
+ goto next;
+ if (i->match_id.key != OS_AREA_DB_KEY_ANY
+ && i->match_id.key != (int)i->idx->key)
+ goto next;
+
+ return 1;
+}
+
+static int db_delete_64(struct os_area_db *db, const struct os_area_db_id *id)
+{
+ struct db_iterator i;
+
+ for (i.db = NULL; db_for_each_64(db, id, &i); ) {
+
+ pr_debug("%s:%d: got (%d:%d) %llxh\n", __func__, __LINE__,
+ i.idx->owner, i.idx->key,
+ (unsigned long long)*i.value_64);
+
+ i.idx->owner = 0;
+ i.idx->key = 0;
+ *i.value_64 = 0;
+ }
+ return 0;
+}
+
+static int db_set_64(struct os_area_db *db, const struct os_area_db_id *id,
+ uint64_t value)
+{
+ struct db_iterator i;
+
+ pr_debug("%s:%d: (%d:%d) <= %llxh\n", __func__, __LINE__,
+ id->owner, id->key, (unsigned long long)value);
+
+ if (!id->owner || id->owner == OS_AREA_DB_OWNER_ANY
+ || id->key == OS_AREA_DB_KEY_ANY) {
+ pr_debug("%s:%d: bad id: (%d:%d)\n", __func__,
+ __LINE__, id->owner, id->key);
+ return -1;
+ }
+
+ db_delete_64(db, id);
+
+ i.db = NULL;
+ if (db_for_each_64(db, &os_area_db_id_empty, &i)) {
+
+ pr_debug("%s:%d: got (%d:%d) %llxh\n", __func__, __LINE__,
+ i.idx->owner, i.idx->key,
+ (unsigned long long)*i.value_64);
+
+ i.idx->owner = id->owner;
+ i.idx->key = id->key;
+ *i.value_64 = value;
+
+ pr_debug("%s:%d: set (%d:%d) <= %llxh\n", __func__, __LINE__,
+ i.idx->owner, i.idx->key,
+ (unsigned long long)*i.value_64);
+ return 0;
+ }
+ pr_debug("%s:%d: database full.\n",
+ __func__, __LINE__);
+ return -1;
+}
+
+static int db_get_64(const struct os_area_db *db,
+ const struct os_area_db_id *id, uint64_t *value)
+{
+ struct db_iterator i;
+
+ i.db = NULL;
+ if (db_for_each_64(db, id, &i)) {
+ *value = *i.value_64;
+ pr_debug("%s:%d: found %lld\n", __func__, __LINE__,
+ (long long int)*i.value_64);
+ return 0;
+ }
+ pr_debug("%s:%d: not found\n", __func__, __LINE__);
+ return -1;
+}
+
+static int db_get_rtc_diff(const struct os_area_db *db, int64_t *rtc_diff)
+{
+ return db_get_64(db, &os_area_db_id_rtc_diff, (uint64_t*)rtc_diff);
+}
+
+static int db_get_video_mode(const struct os_area_db *db,
+ unsigned int *video_mode)
+{
+ return db_get_64(db, &os_area_db_id_video_mode, (uint64_t*)video_mode);
+}
+
+#define dump_db(a) _dump_db(a, __func__, __LINE__)
+static void _dump_db(const struct os_area_db *db, const char *func,
+ int line)
+{
+ pr_debug("%s:%d: db.magic_num: '%s'\n", func, line,
+ (const char*)&db->magic_num);
+ pr_debug("%s:%d: db.version: %u\n", func, line,
+ db->version);
+ pr_debug("%s:%d: db.index_64: %u\n", func, line,
+ db->index_64);
+ pr_debug("%s:%d: db.count_64: %u\n", func, line,
+ db->count_64);
+ pr_debug("%s:%d: db.index_32: %u\n", func, line,
+ db->index_32);
+ pr_debug("%s:%d: db.count_32: %u\n", func, line,
+ db->count_32);
+ pr_debug("%s:%d: db.index_16: %u\n", func, line,
+ db->index_16);
+ pr_debug("%s:%d: db.count_16: %u\n", func, line,
+ db->count_16);
+}
+
+static void os_area_db_init(struct os_area_db *db)
+{
+ /*
+ * item | start | size
+ * ----------+-------+-------
+ * header | 0 | 24
+ * index_64 | 24 | 64
+ * values_64 | 88 | 57*8 = 456
+ * index_32 | 544 | 64
+ * values_32 | 609 | 57*4 = 228
+ * index_16 | 836 | 64
+ * values_16 | 900 | 57*2 = 114
+ * end | 1014 | -
+ */
+
+ memset(db, 0, sizeof(struct os_area_db));
+
+ db->magic_num = 0x2d64622dU;
+ db->version = 1;
+ db->index_64 = 24;
+ db->count_64 = 57;
+ db->index_32 = 544;
+ db->count_32 = 57;
+ db->index_16 = 836;
+ db->count_16 = 57;
+}
+
+/**
+ * update_flash_db - Helper for os_area_queue_work_handler.
+ *
+ */
+
+static void update_flash_db(void)
+{
+ int result;
+ int file;
+ off_t offset;
+ ssize_t count;
+ static const unsigned int buf_len = 8 * OS_AREA_SEGMENT_SIZE;
+ const struct os_area_header *header;
+ struct os_area_db* db;
+
+ /* Read in header and db from flash. */
+
+ file = sys_open("/dev/ps3flash", O_RDWR, 0);
+
+ if (file < 0) {
+ pr_debug("%s:%d sys_open failed\n", __func__, __LINE__);
+ goto fail_open;
+ }
+
+ header = kmalloc(buf_len, GFP_KERNEL);
+
+ if (!header) {
+ pr_debug("%s:%d kmalloc failed\n", __func__, __LINE__);
+ goto fail_malloc;
+ }
+
+ offset = sys_lseek(file, 0, SEEK_SET);
+
+ if (offset != 0) {
+ pr_debug("%s:%d sys_lseek failed\n", __func__, __LINE__);
+ goto fail_header_seek;
+ }
+
+ count = sys_read(file, (char __user *)header, buf_len);
+
+ result = count < OS_AREA_SEGMENT_SIZE || verify_header(header)
+ || count < header->db_area_offset * OS_AREA_SEGMENT_SIZE;
+
+ if (result) {
+ pr_debug("%s:%d verify_header failed\n", __func__, __LINE__);
+ dump_header(header);
+ goto fail_header;
+ }
+
+ /* Now got a good db offset and some maybe good db data. */
+
+ db = (void*)header + header->db_area_offset * OS_AREA_SEGMENT_SIZE;
+
+ result = db_verify(db);
+
+ if (result) {
+ printk(KERN_NOTICE "%s:%d: Verify of flash database failed, "
+ "formatting.\n", __func__, __LINE__);
+ dump_db(db);
+ os_area_db_init(db);
+ }
+
+ /* Now got good db data. */
+
+ db_set_64(db, &os_area_db_id_rtc_diff, saved_params.rtc_diff);
+
+ offset = sys_lseek(file, header->db_area_offset * OS_AREA_SEGMENT_SIZE,
+ SEEK_SET);
+
+ if (offset != header->db_area_offset * OS_AREA_SEGMENT_SIZE) {
+ pr_debug("%s:%d sys_lseek failed\n", __func__, __LINE__);
+ goto fail_db_seek;
+ }
+
+ count = sys_write(file, (const char __user *)db,
+ sizeof(struct os_area_db));
+
+ if (count < sizeof(struct os_area_db)) {
+ pr_debug("%s:%d sys_write failed\n", __func__, __LINE__);
+ }
+
+fail_db_seek:
+fail_header:
+fail_header_seek:
+ kfree(header);
+fail_malloc:
+ sys_close(file);
+fail_open:
+ return;
+}
+
/**
* os_area_queue_work_handler - Asynchronous write handler.
*
@@ -264,6 +644,9 @@ static void os_area_queue_work_handler(s
pr_debug("%s:%d of_find_node_by_path failed\n",
__func__, __LINE__);
+#if defined(CONFIG_PS3_FLASH) || defined(CONFIG_PS3_FLASH_MODULE)
+ update_flash_db();
+#endif
pr_debug(" <- %s:%d\n", __func__, __LINE__);
}
@@ -278,11 +661,15 @@ static void os_area_queue_work(void)
/**
* ps3_os_area_save_params - Copy data from os area mirror to @saved_params.
*
- * For the convenience of the guest, the HV makes a copy of the os area in
+ * For the convenience of the guest the HV makes a copy of the os area in
* flash to a high address in the boot memory region and then puts that RAM
- * address and the byte count into the repository for retreval by the guest.
+ * address and the byte count into the repository for retrieval by the guest.
* We copy the data we want into a static variable and allow the memory setup
* by the HV to be claimed by the lmb manager.
+ *
+ * The os area mirror will not be available to a second stage kernel, and
+ * the header verify will fail. In this case, the saved_params values will
+ * be set from flash memory or the passed in device tree in ps3_os_area_init().
*/
void __init ps3_os_area_save_params(void)
@@ -292,6 +679,7 @@ void __init ps3_os_area_save_params(void
unsigned int size;
struct os_area_header *header;
struct os_area_params *params;
+ struct os_area_db *db;
pr_debug(" -> %s:%d\n", __func__, __LINE__);
@@ -311,16 +699,22 @@ void __init ps3_os_area_save_params(void
if (result) {
/* Second stage kernels exit here. */
-
pr_debug("%s:%d verify_header failed\n", __func__, __LINE__);
dump_header(header);
return;
}
+ db = (struct os_area_db *)__va(lpar_addr
+ + header->db_area_offset * OS_AREA_SEGMENT_SIZE);
+
dump_header(header);
dump_params(params);
+ dump_db(db);
- saved_params.rtc_diff = params->rtc_diff;
+ result = db_verify(db) || db_get_rtc_diff(db, &saved_params.rtc_diff);
+ if (result)
+ saved_params.rtc_diff = params->rtc_diff ? params->rtc_diff
+ : SECONDS_FROM_1970_TO_2000;
saved_params.av_multi_out = params->av_multi_out;
saved_params.valid = 1;
--
^ permalink raw reply
* [patch 4/6] PS3: Add os-area rtc_diff set/get routines
From: geoffrey.levand @ 2007-10-06 21:35 UTC (permalink / raw)
To: paulus; +Cc: linuxppc-dev
In-Reply-To: <20071006213542.311447584@am.sony.com>
Updates for PS3 os-area rtc_diff set/get routines
o Add a new routine ps3_os_area_set_rtc_diff().
o Rename ps3_os_area_rtc_diff() to ps3_os_area_get_rtc_diff().
o Remove static variable rtc_shift with calls to ps3_os_area_get_rtc_diff().
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
---
arch/powerpc/platforms/ps3/os-area.c | 19 +++++++++++++++++--
arch/powerpc/platforms/ps3/platform.h | 3 ++-
arch/powerpc/platforms/ps3/time.c | 14 +++-----------
3 files changed, 22 insertions(+), 14 deletions(-)
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -261,16 +261,31 @@ void __init ps3_os_area_save_params(void
}
/**
- * ps3_os_area_rtc_diff - Returns the rtc diff value.
+ * ps3_os_area_get_rtc_diff - Returns the rtc diff value.
*/
-u64 ps3_os_area_rtc_diff(void)
+u64 ps3_os_area_get_rtc_diff(void)
{
return saved_params.rtc_diff ? saved_params.rtc_diff
: SECONDS_FROM_1970_TO_2000;
}
/**
+ * ps3_os_area_set_rtc_diff - Set the rtc diff value.
+ *
+ * An asynchronous write is needed to support writing updates from
+ * the timer interrupt context.
+ */
+
+void ps3_os_area_set_rtc_diff(u64 rtc_diff)
+{
+ if (saved_params.rtc_diff != rtc_diff) {
+ saved_params.rtc_diff = rtc_diff;
+ os_area_queue_work();
+ }
+}
+
+/**
* ps3_os_area_get_av_multi_out - Returns the default video mode.
*/
--- a/arch/powerpc/platforms/ps3/platform.h
+++ b/arch/powerpc/platforms/ps3/platform.h
@@ -63,7 +63,8 @@ int ps3_set_rtc_time(struct rtc_time *ti
/* os area */
void __init ps3_os_area_save_params(void);
-u64 ps3_os_area_rtc_diff(void);
+u64 ps3_os_area_get_rtc_diff(void);
+void ps3_os_area_set_rtc_diff(u64 rtc_diff);
/* spu */
--- a/arch/powerpc/platforms/ps3/time.c
+++ b/arch/powerpc/platforms/ps3/time.c
@@ -50,12 +50,6 @@ static void __maybe_unused _dump_time(in
_dump_tm(&tm, func, line);
}
-/**
- * rtc_shift - Difference in seconds between 1970 and the ps3 rtc value.
- */
-
-static s64 rtc_shift;
-
void __init ps3_calibrate_decr(void)
{
int result;
@@ -66,8 +60,6 @@ void __init ps3_calibrate_decr(void)
ppc_tb_freq = tmp;
ppc_proc_freq = ppc_tb_freq * 40;
-
- rtc_shift = ps3_os_area_rtc_diff();
}
static u64 read_rtc(void)
@@ -87,18 +79,18 @@ int ps3_set_rtc_time(struct rtc_time *tm
u64 now = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
- rtc_shift = now - read_rtc();
+ ps3_os_area_set_rtc_diff(now - read_rtc());
return 0;
}
void ps3_get_rtc_time(struct rtc_time *tm)
{
- to_tm(read_rtc() + rtc_shift, tm);
+ to_tm(read_rtc() + ps3_os_area_get_rtc_diff(), tm);
tm->tm_year -= 1900;
tm->tm_mon -= 1;
}
unsigned long __init ps3_get_boot_time(void)
{
- return read_rtc() + rtc_shift;
+ return read_rtc() + ps3_os_area_get_rtc_diff();
}
--
^ permalink raw reply
* Re: Where are inb/outb macros?
From: Arnd Bergmann @ 2007-10-06 23:46 UTC (permalink / raw)
To: linuxppc-dev, benh
In-Reply-To: <1191704881.6414.3.camel@pasglop>
On Saturday 06 October 2007, Benjamin Herrenschmidt wrote:
> On Sun, 2007-10-07 at 00:47 +0400, Peter Lemenkov wrote:
> > Hello All!
> > I can't compile one small software title because of lack <sys/io.h>
> > and inb/outb macros. What sould I do to overcome this obstacle?
> >
> > My linux distro is Fedora 7 if it is matter.
>
> They don't exist in user space on non-x86. You have to do things
> differently. What is your software trying to do ? If it's trying to
> access a PCI device IO space, you probably want to mmap it in sysfs and
> write your own accessors with appropriate memory barriers.
All cases where I've seen application software use <sys/io.h>, there was
actually a full device driver in the kernel that already exported a
high-level interface to user space. If that's the case here, the application
should use that instead of sysfs.
Arnd <><
^ permalink raw reply
* Re: TASK_SIZE default 0x80000000 ?
From: Paul Mackerras @ 2007-10-07 4:06 UTC (permalink / raw)
To: Kumar Gala; +Cc: PowerPC dev list, Benjamin Herrenschmidt
In-Reply-To: <C2771B73-A555-4119-AC21-1441D4CC2125@freescale.com>
Kumar Gala writes:
> In a discussion with Hollis over beer he raised the question why
> TASK_SIZE is 0x80000000 on ppc32.
>
> I was wondering if anyone know why this was still the case? Seems
> like we have a 1Gb whole between TASK_SIZE & KERNELBASE.
Two reasons: (a) PReP used to map PCI stuff with BATs in the
0x80000000 - 0xbfffffff region, and (b) some embedded ports with
software-loaded TLBs test just the high bit of the address to
determine whether to use the kernel or user page tables.
Paul.
^ permalink raw reply
* [PATCH 01/15] [POWERPC] TQM5200 DTS
From: Marian Balakowicz @ 2007-10-07 11:15 UTC (permalink / raw)
Cc: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add device tree source file for TQM5200 board.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Martin Krause <martin.krause@tqs.de>
---
tqm5200.dts | 217 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 217 insertions(+)
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
new file mode 100644
index 0000000..e3e0ebf
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -0,0 +1,217 @@
+/*
+ * TQM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Modified for TQM5200 by Marian Balakowicz <m8@semihalf.com>
+ *
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+ model = "fsl,tqm5200";
+ compatible = "fsl,tqm5200\0generic-mpc5200";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ model = "fsl,mpc5200";
+ compatible = "mpc5200";
+ revision = ""; // from bootloader
+ #interrupt-cells = <3>;
+ device_type = "soc";
+ ranges = <0 f0000000 f0010000>;
+ reg = <f0000000 00010000>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "mpc5200b-cdm\0mpc5200-cdm";
+ reg = <200 38>;
+ };
+
+ mpc5200_pic: pic@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ device_type = "interrupt-controller";
+ compatible = "mpc5200-pic";
+ reg = <500 80>;
+ built-in;
+ };
+
+ gpt@600 { // General Purpose Timer
+ compatible = "mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <0>;
+ reg = <600 10>;
+ interrupts = <1 9 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ has-wdt;
+ };
+
+ gpio@b00 {
+ compatible = "mpc5200-gpio";
+ reg = <b00 40>;
+ interrupts = <1 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ usb@1000 {
+ device_type = "usb-ohci-be";
+ compatible = "mpc5200-ohci\0ohci-be";
+ reg = <1000 ff>;
+ interrupts = <2 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ pci@0d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "mpc5200-pci";
+ reg = <d00 100>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
+ c000 0 0 2 &mpc5200_pic 0 0 3
+ c000 0 0 3 &mpc5200_pic 0 0 3
+ c000 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 80000000 80000000 0 10000000
+ 02000000 0 90000000 90000000 0 10000000
+ 01000000 0 00000000 a0000000 0 01000000>;
+ };
+
+ bestcomm@1200 {
+ device_type = "dma-controller";
+ compatible = "mpc5200-bestcomm";
+ reg = <1200 80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 a 0 3 b 0
+ 3 c 0 3 d 0 3 e 0 3 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ xlb@1f00 {
+ compatible = "mpc5200-xlb";
+ reg = <1f00 100>;
+ };
+
+ serial@2000 { // PSC1
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <0>; // Logical port assignment
+ cell-index = <0>;
+ reg = <2000 100>;
+ interrupts = <2 1 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2200 { // PSC2
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <1>; // Logical port assignment
+ cell-index = <1>;
+ reg = <2200 100>;
+ interrupts = <2 2 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2400 { // PSC3
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <2>; // Logical port assignment
+ cell-index = <2>;
+ reg = <2400 100>;
+ interrupts = <2 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ethernet@3000 {
+ device_type = "network";
+ compatible = "mpc5200-fec";
+ reg = <3000 800>;
+ interrupts = <2 5 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ata@3a00 {
+ device_type = "ata";
+ compatible = "mpc5200b-ata\0mpc5200-ata";
+ reg = <3a00 100>;
+ interrupts = <2 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ i2c@3d40 {
+ device_type = "i2c";
+ compatible = "mpc5200-i2c\0fsl-i2c";
+ cell-index = <1>;
+ reg = <3d40 40>;
+ interrupts = <2 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl5200-clocking;
+ };
+
+ sram@8000 {
+ device_type = "sram";
+ compatible = "mpc5200-sram\0sram";
+ reg = <8000 4000>;
+ };
+
+ flash@c000000 {
+ device_type = "rom";
+ compatible = "direct-mapped";
+ reg = <0c000000 02000000>;
+ probe-type = "CFI";
+ bank-width = <4>;
+ partitions = <00000000 000a0000
+ 000a0000 00020000
+ 000c0000 00240000
+ 00300000 00200000
+ 00500000 00400000
+ 00900000 00800000
+ 01100000 00f00000>;
+ partition-names = "firmware\0dtb\0kernel\0initrd\0small-fs\0misc\0big-fs";
+ };
+ };
+};
^ permalink raw reply related
* [PATCH 02/15] [POWERPC] TQM5200 defconfig
From: Marian Balakowicz @ 2007-10-07 11:18 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add TQM5200 board defconfig file.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
---
tqm5200_defconfig | 1303 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 1303 insertions(+)
diff --git a/arch/powerpc/configs/tqm5200_defconfig b/arch/powerpc/configs/tqm5200_defconfig
new file mode 100644
index 0000000..382d12f
--- /dev/null
+++ b/arch/powerpc/configs/tqm5200_defconfig
@@ -0,0 +1,1303 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc9
+# Wed Oct 3 21:14:55 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_MPC5200=y
+# CONFIG_PPC_MPC5200_BUGFIX is not set
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+CONFIG_PPC_TQM5200=y
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_HIBERNATION is not set
+CONFIG_SECCOMP=y
+# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_INDIRECT_PCI is not set
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+CONFIG_PATA_MPC52xx=y
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_PLATFORM=y
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_MPC5200_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_SOC=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
^ permalink raw reply related
* [POWERPC 03/15] [POWERPC] TQM5200 board support
From: Marian Balakowicz @ 2007-10-07 11:19 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add arch/powerpc board support for TQM5200.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
---
Kconfig | 5 +
Makefile | 1
tqm5200.c | 174 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 180 insertions(+)
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 3ffaa06..7c828eb 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -33,4 +33,9 @@ config PPC_LITE5200
select PPC_MPC5200
default n
+config PPC_TQM5200
+ bool "TQM5200 Board"
+ depends on PPC_MULTIPLATFORM && PPC32
+ select PPC_MPC5200
+ default n
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index b91e39c..4997ebf 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -8,5 +8,6 @@ endif
obj-$(CONFIG_PPC_EFIKA) += efika.o
obj-$(CONFIG_PPC_LITE5200) += lite5200.o
+obj-$(CONFIG_PPC_TQM5200) += tqm5200.o
obj-$(CONFIG_PM) += mpc52xx_sleep.o mpc52xx_pm.o
diff --git a/arch/powerpc/platforms/52xx/tqm5200.c b/arch/powerpc/platforms/52xx/tqm5200.c
new file mode 100644
index 0000000..780b79f
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/tqm5200.c
@@ -0,0 +1,174 @@
+/*
+ * TQM5200 board support
+ *
+ * Written by: Grant Likely <grant.likely@secretlab.ca> for lite5200
+ * Adapted for tqm5200 by: Jan Wrobel <wrr@semihalf.com>
+ *
+ * Copyright (C) Secret Lab Technologies Ltd. 2006. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Description:
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/of_platform.h>
+
+#include <asm/mpc52xx.h>
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init
+tqm5200_setup_cpu(void)
+{
+ struct mpc52xx_gpio __iomem *gpio;
+ u32 port_config;
+
+ /* Map zones */
+ gpio = mpc52xx_find_and_map("mpc5200-gpio");
+ if (!gpio) {
+ printk(KERN_ERR __FILE__ ": "
+ "Error while mapping GPIO register for port config. "
+ "Expect some abnormal behavior\n");
+ goto error;
+ }
+
+ /* Set port config */
+ port_config = in_be32(&gpio->port_config);
+
+ port_config &= ~0x00800000; /* 48Mhz internal, pin is GPIO */
+
+ port_config &= ~0x00007000; /* USB port : Differential mode */
+ port_config |= 0x00001000; /* USB 1 only */
+
+ port_config &= ~0x03000000; /* ATA CS is on csb_4/5 */
+ port_config |= 0x01000000;
+
+ pr_debug("port_config: old:%x new:%x\n",
+ in_be32(&gpio->port_config), port_config);
+ out_be32(&gpio->port_config, port_config);
+
+ /* Unmap zone */
+error:
+ iounmap(gpio);
+}
+
+static void __init tqm5200_setup_arch(void)
+{
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("tqm5200_setup_arch()", 0);
+
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np) {
+ unsigned int *fp =
+ (int *)of_get_property(np, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(np);
+ }
+
+ /* CPU & Port mux setup */
+ mpc52xx_setup_cpu();
+ tqm5200_setup_cpu();
+
+#ifdef CONFIG_PCI
+ np = of_find_node_by_type(NULL, "pci");
+ if (np) {
+ mpc52xx_add_bridge(np);
+ of_node_put(np);
+ }
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ /*
+ * We want the proper initrd behavior, i.e., launching of
+ * /linuxrc from the initial root file system, and not only
+ * mounting it as the normal root file system.
+ */
+ ROOT_DEV = 0x0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+}
+
+void tqm5200_show_cpuinfo(struct seq_file *m)
+{
+ struct device_node* np = of_find_all_nodes(NULL);
+ const char *model = NULL;
+
+ if (np)
+ model = of_get_property(np, "model", NULL);
+
+ seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
+ seq_printf(m, "machine\t\t: %s\n", model ? model : "unknown");
+
+ of_node_put(np);
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init tqm5200_probe(void)
+{
+ unsigned long node = of_get_flat_dt_root();
+ const char *model = of_get_flat_dt_prop(node, "model", NULL);
+
+ if (!of_flat_dt_is_compatible(node, "fsl,tqm5200"))
+ return 0;
+ pr_debug("%s board found\n", model ? model : "unknown");
+
+ return 1;
+}
+
+define_machine(tqm5200) {
+ .name = "tqm5200",
+ .probe = tqm5200_probe,
+ .setup_arch = tqm5200_setup_arch,
+ .init = mpc52xx_declare_of_platform_devices,
+ .init_IRQ = mpc52xx_init_irq,
+ .get_irq = mpc52xx_get_irq,
+ .show_cpuinfo = tqm5200_show_cpuinfo,
+ .calibrate_decr = generic_calibrate_decr,
+};
^ permalink raw reply related
* [PATCH 04/15] [POWERPC] CM5200 DTS
From: Marian Balakowicz @ 2007-10-07 11:20 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add device tree source file for CM5200 board.
Signed-off-by Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
---
cm5200.dts | 284 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 284 insertions(+)
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
new file mode 100644
index 0000000..96d2ee4
--- /dev/null
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -0,0 +1,284 @@
+/*
+ * CM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Modified for CM5200 by Jan Wrobel <wrr@semihalf.com>
+ *
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+ model = "cm5200";
+ compatible = "fsl,cm5200\0generic-mpc5200";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ model = "fsl,mpc5200b";
+ compatible = "mpc5200";
+ revision = ""; // from bootloader
+ #interrupt-cells = <3>;
+ device_type = "soc";
+ ranges = <0 f0000000 f0010000>;
+ reg = <f0000000 00010000>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "mpc5200b-cdm\0mpc5200-cdm";
+ reg = <200 38>;
+ };
+
+ mpc5200_pic: pic@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ device_type = "interrupt-controller";
+ compatible = "mpc5200b-pic\0mpc5200-pic";
+ reg = <500 80>;
+ built-in;
+ };
+
+ gpt@600 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <0>;
+ reg = <600 10>;
+ interrupts = <1 9 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ has-wdt;
+ };
+
+ gpt@610 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <1>;
+ reg = <610 10>;
+ interrupts = <1 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@620 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <2>;
+ reg = <620 10>;
+ interrupts = <1 b 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@630 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <3>;
+ reg = <630 10>;
+ interrupts = <1 c 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@640 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <4>;
+ reg = <640 10>;
+ interrupts = <1 d 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@650 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <5>;
+ reg = <650 10>;
+ interrupts = <1 e 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@660 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <6>;
+ reg = <660 10>;
+ interrupts = <1 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@670 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <7>;
+ reg = <670 10>;
+ interrupts = <1 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ rtc@800 { // Real time clock
+ compatible = "mpc5200b-rtc\0mpc5200-rtc";
+ device_type = "rtc";
+ reg = <800 100>;
+ interrupts = <1 5 0 1 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpio@b00 {
+ compatible = "mpc5200b-gpio\0mpc5200-gpio";
+ reg = <b00 40>;
+ interrupts = <1 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpio-wkup@c00 {
+ compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
+ reg = <c00 40>;
+ interrupts = <1 8 0 0 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ spi@f00 {
+ device_type = "spi";
+ compatible = "mpc5200b-spi\0mpc5200-spi";
+ reg = <f00 20>;
+ interrupts = <2 d 0 2 e 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ usb@1000 {
+ device_type = "usb-ohci-be";
+ compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
+ reg = <1000 ff>;
+ interrupts = <2 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ bestcomm@1200 {
+ device_type = "dma-controller";
+ compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm";
+ reg = <1200 80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 a 0 3 b 0
+ 3 c 0 3 d 0 3 e 0 3 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ xlb@1f00 {
+ compatible = "mpc5200b-xlb\0mpc5200-xlb";
+ reg = <1f00 100>;
+ };
+
+ serial@2000 { // PSC1
+ device_type = "serial";
+ compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ port-number = <0>; // Logical port assignment
+ cell-index = <0>;
+ reg = <2000 100>;
+ interrupts = <2 1 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2200 { // PSC2
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <1>; // Logical port assignment
+ cell-index = <1>;
+ reg = <2200 100>;
+ interrupts = <2 2 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2400 { // PSC3
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <2>; // Logical port assignment
+ cell-index = <2>;
+ reg = <2400 100>;
+ interrupts = <2 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ serial@2c00 { // PSC6
+ device_type = "serial";
+ compatible = "mpc5200-psc-uart";
+ port-number = <5>; // Logical port assignment
+ cell-index = <5>;
+ reg = <2c00 100>;
+ interrupts = <2 4 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ethernet@3000 {
+ device_type = "network";
+ compatible = "mpc5200b-fec\0mpc5200-fec";
+ reg = <3000 800>;
+ interrupts = <2 5 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ i2c@3d40 {
+ device_type = "i2c";
+ compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
+ cell-index = <1>;
+ reg = <3d40 40>;
+ interrupts = <2 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl5200-clocking;
+ };
+
+ sram@8000 {
+ device_type = "sram";
+ compatible = "mpc5200b-sram\0mpc5200-sram\0sram";
+ reg = <8000 4000>;
+ };
+
+ flash@c000000 {
+ device_type = "rom";
+ compatible = "direct-mapped";
+ reg = <0c000000 02000000>;
+ probe-type = "CFI";
+ bank-width = <2>;
+ partitions = <00000000 00060000
+ 00060000 00020000
+ 00080000 00020000
+ 000a0000 00020000
+ 000c0000 00200000
+ 002c0000 01b40000
+ 01e00000 00200000>;
+ partition-names = "uboot\0env\0redund_env\0dtb\0kernel\0rootfs\0config";
+ };
+ };
+};
^ permalink raw reply related
* [PATCH 05/15] [POWERPC] CM5200 defconfig
From: Marian Balakowicz @ 2007-10-07 11:22 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add CM5200 board defconfig file.
Signed-off-by Marian Balakowicz <m8@semihalf.com>
---
cm5200_defconfig | 1032 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 1032 insertions(+)
diff --git a/arch/powerpc/configs/cm5200_defconfig b/arch/powerpc/configs/cm5200_defconfig
new file mode 100644
index 0000000..6a31518
--- /dev/null
+++ b/arch/powerpc/configs/cm5200_defconfig
@@ -0,0 +1,1032 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc9
+# Fri Oct 5 12:23:56 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_MPC5200=y
+# CONFIG_PPC_MPC5200_BUGFIX is not set
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_TQM5200 is not set
+CONFIG_PPC_CM5200=y
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_HIBERNATION is not set
+CONFIG_SECCOMP=y
+# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_SOC=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
^ permalink raw reply related
* [PATCH 06/15] [POWERPC] CM5200 board support
From: Marian Balakowicz @ 2007-10-07 11:24 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add arch/powerpc board support for CM5200.
Signed-off-by Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
---
Kconfig | 5 +
Makefile | 1
cm5200.c | 161 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 167 insertions(+)
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 7c828eb..ec952e4 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -39,3 +39,8 @@ config PPC_TQM5200
select PPC_MPC5200
default n
+config PPC_CM5200
+ bool "Schindler CM5200 Boards"
+ depends on PPC_MULTIPLATFORM && PPC32
+ select PPC_MPC5200
+ default n
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index 4997ebf..5b4adfb 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -9,5 +9,6 @@ endif
obj-$(CONFIG_PPC_EFIKA) += efika.o
obj-$(CONFIG_PPC_LITE5200) += lite5200.o
obj-$(CONFIG_PPC_TQM5200) += tqm5200.o
+obj-$(CONFIG_PPC_CM5200) += cm5200.o
obj-$(CONFIG_PM) += mpc52xx_sleep.o mpc52xx_pm.o
diff --git a/arch/powerpc/platforms/52xx/cm5200.c b/arch/powerpc/platforms/52xx/cm5200.c
new file mode 100644
index 0000000..9d3b1f2
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/cm5200.c
@@ -0,0 +1,161 @@
+/*
+ * Schindler CM5200 board support
+ *
+ * Written by: Grant Likely <grant.likely@secretlab.ca>
+ * Adapted for CM5200 by: Jan Wrobel <wrr@semihalf.com>
+ *
+ * Copyright (C) Secret Lab Technologies Ltd. 2006. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Description:
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/of_platform.h>
+
+#include <asm/mpc52xx.h>
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init cm5200_setup_cpu(void)
+{
+ struct mpc52xx_gpio __iomem *gpio;
+ u32 port_config;
+
+ /* Map zones */
+ gpio = mpc52xx_find_and_map("mpc5200-gpio");
+ if (!gpio) {
+ printk(KERN_ERR __FILE__ ": "
+ "Error while mapping GPIO register for port config. "
+ "Expect some abnormal behavior\n");
+ goto error;
+ }
+
+ /* Set port config */
+ port_config = in_be32(&gpio->port_config);
+
+ port_config &= ~0x00800000; /* 48Mhz internal, pin is GPIO */
+
+ port_config &= ~0x00007000; /* USB port : Differential mode */
+ port_config |= 0x00001000; /* USB 1 only */
+
+ pr_debug("port_config: old:%x new:%x\n",
+ in_be32(&gpio->port_config), port_config);
+
+ out_be32(&gpio->port_config, port_config);
+
+ /* Unmap zone */
+error:
+ iounmap(gpio);
+}
+
+static void __init cm5200_setup_arch(void)
+{
+ struct device_node *np;
+
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np) {
+ unsigned int *fp =
+ (int *)get_property(np, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(np);
+ }
+
+ /* CPU & Port mux setup */
+ mpc52xx_setup_cpu(); /* Generic */
+ cm5200_setup_cpu(); /* Platorm specific */
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ /*
+ * We want the proper initrd behavior, i.e., launching of
+ * /linuxrc from the initial root file system, and not only
+ * mounting it as the normal root file system.
+ */
+ ROOT_DEV = 0x0;
+ else
+#endif
+
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+}
+
+void cm5200_show_cpuinfo(struct seq_file *m)
+{
+ struct device_node* np = of_find_all_nodes(NULL);
+ const char *model = NULL;
+
+ if (np)
+ model = get_property(np, "model", NULL);
+
+ seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
+ seq_printf(m, "machine\t\t: %s\n", model ? model : "unknown");
+
+ of_node_put(np);
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init cm5200_probe(void)
+{
+ unsigned long node = of_get_flat_dt_root();
+ const char *model = of_get_flat_dt_prop(node, "model", NULL);
+
+ if (!of_flat_dt_is_compatible(node, "fsl,cm5200"))
+ return 0;
+ pr_debug("%s board found\n", model ? model : "unknown");
+
+ return 1;
+}
+
+define_machine(cm5200) {
+ .name = "cm5200",
+ .probe = cm5200_probe,
+ .setup_arch = cm5200_setup_arch,
+ .init = mpc52xx_declare_of_platform_devices,
+ .init_IRQ = mpc52xx_init_irq,
+ .get_irq = mpc52xx_get_irq,
+ .show_cpuinfo = cm5200_show_cpuinfo,
+ .calibrate_decr = generic_calibrate_decr,
+};
^ permalink raw reply related
* [PATCH 07/15] [POWERPC] Promess Motion-PRO DTS
From: Marian Balakowicz @ 2007-10-07 11:25 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add device tree source file for Motion-PRO board.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
motionpro.dts | 334 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 334 insertions(+)
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
new file mode 100644
index 0000000..4b197c8
--- /dev/null
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -0,0 +1,334 @@
+/*
+ * Motion-PRO board Device Tree Source, based on Lite5200B DTS.
+ *
+ * Copyright (C) 2007 Semihalf
+ * Modified for CM5200 by Marian Balakowicz <m8@semihalf.com>
+ *
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * Copyright (C) 2007 DENX Software Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+ model = "fsl,motionpro";
+ // revision = "1.0";
+ compatible = "fsl,motionpro\0generic-mpc5200";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ model = "fsl,mpc5200b";
+ compatible = "mpc5200";
+ revision = ""; // from bootloader
+ #interrupt-cells = <3>;
+ device_type = "soc";
+ ranges = <0 f0000000 f0010000>;
+ reg = <f0000000 00010000>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "mpc5200b-cdm\0mpc5200-cdm";
+ reg = <200 38>;
+ };
+
+ mpc5200_pic: pic@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ device_type = "interrupt-controller";
+ compatible = "mpc5200b-pic\0mpc5200-pic";
+ reg = <500 80>;
+ built-in;
+ };
+
+ gpt@600 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <0>;
+ reg = <600 10>;
+ interrupts = <1 9 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ has-wdt;
+ };
+
+ gpt@610 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <1>;
+ reg = <610 10>;
+ interrupts = <1 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@620 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <2>;
+ reg = <620 10>;
+ interrupts = <1 b 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@630 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <3>;
+ reg = <630 10>;
+ interrupts = <1 c 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@640 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <4>;
+ reg = <640 10>;
+ interrupts = <1 d 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@650 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <5>;
+ reg = <650 10>;
+ interrupts = <1 e 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@660 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <6>;
+ reg = <660 10>;
+ interrupts = <1 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt@670 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <7>;
+ reg = <670 10>;
+ interrupts = <1 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ rtc@800 { // Real time clock
+ compatible = "mpc5200b-rtc\0mpc5200-rtc";
+ device_type = "rtc";
+ reg = <800 100>;
+ interrupts = <1 5 0 1 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ mscan@980 {
+ device_type = "mscan";
+ compatible = "mpc5200b-mscan\0mpc5200-mscan";
+ cell-index = <1>;
+ interrupts = <2 12 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ reg = <980 80>;
+ };
+
+ gpio@b00 {
+ compatible = "mpc5200b-gpio\0mpc5200-gpio";
+ reg = <b00 40>;
+ interrupts = <1 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpio-wkup@c00 {
+ compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
+ reg = <c00 40>;
+ interrupts = <1 8 0 0 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ pci@0d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "mpc5200b-pci\0mpc5200-pci";
+ reg = <d00 100>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+ c000 0 0 2 &mpc5200_pic 1 1 3
+ c000 0 0 3 &mpc5200_pic 1 2 3
+ c000 0 0 4 &mpc5200_pic 1 3 3
+
+ c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+ c800 0 0 2 &mpc5200_pic 1 2 3
+ c800 0 0 3 &mpc5200_pic 1 3 3
+ c800 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 80000000 80000000 0 20000000
+ 02000000 0 a0000000 a0000000 0 10000000
+ 01000000 0 00000000 b0000000 0 01000000>;
+ };
+
+ spi@f00 {
+ device_type = "spi";
+ compatible = "mpc5200b-spi\0mpc5200-spi";
+ reg = <f00 20>;
+ interrupts = <2 d 0 2 e 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ usb@1000 {
+ device_type = "usb-ohci-be";
+ compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
+ reg = <1000 ff>;
+ interrupts = <2 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ bestcomm@1200 {
+ device_type = "dma-controller";
+ compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm";
+ reg = <1200 80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 a 0 3 b 0
+ 3 c 0 3 d 0 3 e 0 3 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ xlb@1f00 {
+ compatible = "mpc5200b-xlb\0mpc5200-xlb";
+ reg = <1f00 100>;
+ };
+
+ serial@2000 { // PSC1
+ device_type = "serial";
+ compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ port-number = <0>; // Logical port assignment
+ cell-index = <0>;
+ reg = <2000 100>;
+ interrupts = <2 1 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ // PSC2 in spi master mode
+ spi@2200 { // PSC2
+ device_type = "spi";
+ compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi";
+ cell-index = <1>;
+ reg = <2200 100>;
+ interrupts = <2 2 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ // PSC5 in uart mode example
+ serial@2800 { // PSC5
+ device_type = "serial";
+ compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ port-number = <4>; // Logical port assignment
+ cell-index = <4>;
+ reg = <2800 100>;
+ interrupts = <2 c 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ethernet@3000 {
+ device_type = "network";
+ compatible = "mpc5200b-fec\0mpc5200-fec";
+ reg = <3000 800>;
+ mac-address = [ 02 03 04 05 06 07 ]; // Bad!
+ interrupts = <2 5 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ata@3a00 {
+ device_type = "ata";
+ compatible = "mpc5200b-ata\0mpc5200-ata";
+ reg = <3a00 100>;
+ interrupts = <2 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ i2c@3d40 {
+ device_type = "i2c";
+ compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
+ cell-index = <1>;
+ reg = <3d40 40>;
+ interrupts = <2 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl5200-clocking;
+ };
+ sram@8000 {
+ device_type = "sram";
+ compatible = "mpc5200b-sram\0mpc5200-sram\0sram";
+ reg = <8000 4000>;
+ };
+
+ };
+ kollmorgen {
+ device_type = "kollmorgen";
+ compatible = "kollmorgen";
+ reg = <50000000 ffff>;
+ interrupts = <1 1 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+ cpld {
+ device_type = "cpld";
+ compatible = "cpld";
+ reg = <50010000 ffff>;
+ };
+ anybus {
+ device_type = "anybus";
+ compatible = "anybus";
+ reg = <50020000 ffff>;
+ };
+ pro_module_general {
+ device_type = "pro_module_general";
+ compatible = "pro_module_general";
+ reg = <50020000 3>;
+ };
+ pro_module_dio {
+ device_type = "pro_module_dio";
+ compatible = "pro_module_dio";
+ reg = <50020800 2>;
+ };
+
+};
^ permalink raw reply related
* [PATCH 08/15] [POWERPC] Promess Motion-PRO defconfig
From: Marian Balakowicz @ 2007-10-07 11:26 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add Motion-PRO board defconfig file.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
motionpro_defconfig | 914 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 914 insertions(+)
diff --git a/arch/powerpc/configs/motionpro_defconfig b/arch/powerpc/configs/motionpro_defconfig
new file mode 100644
index 0000000..fcce47e
--- /dev/null
+++ b/arch/powerpc/configs/motionpro_defconfig
@@ -0,0 +1,914 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc9
+# Fri Oct 5 12:54:17 2007
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_MPC5200=y
+# CONFIG_PPC_MPC5200_BUGFIX is not set
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+CONFIG_PPC_MOTIONPRO=y
+# CONFIG_PPC_TQM5200 is not set
+# CONFIG_PPC_CM5200 is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+# CONFIG_HIBERNATION is not set
+CONFIG_SECCOMP=y
+# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_MPC52xx=y
+CONFIG_PATA_PLATFORM=y
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_NETDEV_1000=y
+# CONFIG_MV643XX_ETH is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
^ permalink raw reply related
* [PATCH 09/15] [POWERPC] Promess Motion-PRO board support
From: Marian Balakowicz @ 2007-10-07 11:28 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add arch/powerpc board support for Promess Motion-PRO.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
---
Kconfig | 6 ++
Makefile | 1
motionpro.c | 175 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 182 insertions(+)
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index ec952e4..9cf2402 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -33,6 +33,12 @@ config PPC_LITE5200
select PPC_MPC5200
default n
+config PPC_MOTIONPRO
+ bool "Promess Motion-PRO Board"
+ depends on PPC_MULTIPLATFORM && PPC32
+ select PPC_MPC5200
+ default n
+
config PPC_TQM5200
bool "TQM5200 Board"
depends on PPC_MULTIPLATFORM && PPC32
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index 5b4adfb..bde1b0a 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -8,6 +8,7 @@ endif
obj-$(CONFIG_PPC_EFIKA) += efika.o
obj-$(CONFIG_PPC_LITE5200) += lite5200.o
+obj-$(CONFIG_PPC_MOTIONPRO) += motionpro.o
obj-$(CONFIG_PPC_TQM5200) += tqm5200.o
obj-$(CONFIG_PPC_CM5200) += cm5200.o
diff --git a/arch/powerpc/platforms/52xx/motionpro.c b/arch/powerpc/platforms/52xx/motionpro.c
new file mode 100644
index 0000000..2cf8a47
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/motionpro.c
@@ -0,0 +1,175 @@
+/*
+ * Promess Motion-PRO board support
+ *
+ * Written by: Grant Likely <grant.likely@secretlab.ca>
+ * Adapted for Motion-PRO by: Marian Balakowicz <m8@semihalf.com>
+ *
+ * Copyright (C) Secret Lab Technologies Ltd. 2006. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Description:
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/of_platform.h>
+
+#include <asm/mpc52xx.h>
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+
+static void __init
+motionpro_setup_cpu(void)
+{
+ struct mpc52xx_gpio __iomem *gpio;
+ u32 port_config;
+
+ /* Map zones */
+ gpio = mpc52xx_find_and_map("mpc5200-gpio");
+ if (!gpio) {
+ printk(KERN_ERR __FILE__ ": "
+ "Error while mapping GPIO register for port config. "
+ "Expect some abnormal behavior\n");
+ goto error;
+ }
+
+ /* Set port config */
+ port_config = in_be32(&gpio->port_config);
+
+ port_config &= ~0x00800000; /* 48Mhz internal, pin is GPIO */
+
+ port_config &= ~0x00007000; /* USB port : Differential mode */
+ port_config |= 0x00001000; /* USB 1 only */
+
+ port_config &= ~0x03000000; /* ATA CS is on csb_4/5 */
+ port_config |= 0x01000000;
+
+ pr_debug("port_config: old:%x new:%x\n",
+ in_be32(&gpio->port_config), port_config);
+ out_be32(&gpio->port_config, port_config);
+
+ /* Unmap zone */
+error:
+ iounmap(gpio);
+}
+
+static void __init motionpro_setup_arch(void)
+{
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("motionpro_setup_arch()", 0);
+
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np) {
+ unsigned int *fp =
+ (int *)get_property(np, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(np);
+ }
+
+ /* CPU & Port mux setup */
+ mpc52xx_setup_cpu(); /* Generic */
+ motionpro_setup_cpu(); /* Platorm specific */
+
+#ifdef CONFIG_PCI
+ np = of_find_node_by_type(NULL, "pci");
+ if (np) {
+ mpc52xx_add_bridge(np);
+ of_node_put(np);
+ }
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ /*
+ * We want the proper initrd behavior, i.e., launching of
+ * /linuxrc from the initial root file system, and not only
+ * mounting it as the normal root file system.
+ */
+ ROOT_DEV = 0x0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+}
+
+void motionpro_show_cpuinfo(struct seq_file *m)
+{
+ struct device_node* np = of_find_all_nodes(NULL);
+ const char *model = NULL;
+
+ if (np)
+ model = get_property(np, "model", NULL);
+
+ seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
+ seq_printf(m, "machine\t\t: %s\n", model ? model : "unknown");
+
+ of_node_put(np);
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init motionpro_probe(void)
+{
+ unsigned long node = of_get_flat_dt_root();
+ const char *model = of_get_flat_dt_prop(node, "model", NULL);
+
+ if (!of_flat_dt_is_compatible(node, "fsl,motionpro"))
+ return 0;
+ pr_debug("%s board found\n", model ? model : "unknown");
+
+ return 1;
+}
+
+define_machine(motionpro) {
+ .name = "motionpro",
+ .probe = motionpro_probe,
+ .setup_arch = motionpro_setup_arch,
+ .init = mpc52xx_declare_of_platform_devices,
+ .init_IRQ = mpc52xx_init_irq,
+ .get_irq = mpc52xx_get_irq,
+ .show_cpuinfo = motionpro_show_cpuinfo,
+ .calibrate_decr = generic_calibrate_decr,
+};
^ permalink raw reply related
* [PATCH 10/15] [POWERPC] Add mpc52xx_find_and_map_path(), refactor utility functions.
From: Marian Balakowicz @ 2007-10-07 11:30 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add helper routine mpc52xx_find_and_map_path(). Extract common code to
mpc52xx_map_node() and refactor mpc52xx_find_and_map().
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
---
arch/powerpc/platforms/52xx/mpc52xx_common.c | 21 +++++++++++++++++----
include/asm-powerpc/mpc52xx.h | 1 +
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 2dd415f..b1cd7b0 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -20,14 +20,12 @@
#include <asm/mpc52xx.h>
-void __iomem *
-mpc52xx_find_and_map(const char *compatible)
+static void __iomem *
+mpc52xx_map_node(struct device_node *ofn)
{
- struct device_node *ofn;
const u32 *regaddr_p;
u64 regaddr64, size64;
- ofn = of_find_compatible_node(NULL, NULL, compatible);
if (!ofn)
return NULL;
@@ -43,8 +41,23 @@ mpc52xx_find_and_map(const char *compatible)
return ioremap((u32)regaddr64, (u32)size64);
}
+
+void __iomem *
+mpc52xx_find_and_map(const char *compatible)
+{
+ return mpc52xx_map_node(
+ of_find_compatible_node(NULL, NULL, compatible));
+}
+
EXPORT_SYMBOL(mpc52xx_find_and_map);
+void __iomem *
+mpc52xx_find_and_map_path(const char *path)
+{
+ return mpc52xx_map_node(of_find_node_by_path(path));
+}
+
+EXPORT_SYMBOL(mpc52xx_find_and_map_path);
/**
* mpc52xx_find_ipb_freq - Find the IPB bus frequency for a device
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
index c4631f6..4707de6 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/include/asm-powerpc/mpc52xx.h
@@ -242,6 +242,7 @@ struct mpc52xx_cdm {
#ifndef __ASSEMBLY__
extern void __iomem * mpc52xx_find_and_map(const char *);
+extern void __iomem * mpc52xx_find_and_map_path(const char *path);
extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
extern void mpc52xx_setup_cpu(void);
extern void mpc52xx_declare_of_platform_devices(void);
^ permalink raw reply related
* [PATCH 11/15] [POWERPC] Motion-PRO: Add LED support.
From: Marian Balakowicz @ 2007-10-07 11:31 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add LED driver for Promess Motion-PRO board.
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
---
arch/powerpc/configs/motionpro_defconfig | 3
arch/powerpc/platforms/52xx/motionpro.c | 38 +++++
drivers/leds/Kconfig | 7
drivers/leds/Makefile | 1
drivers/leds/leds-motionpro.c | 221 +++++++++++++++++++++++++++++++
include/asm-powerpc/mpc52xx.h | 5
6 files changed, 274 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/configs/motionpro_defconfig b/arch/powerpc/configs/motionpro_defconfig
index fcce47e..ce62123 100644
--- a/arch/powerpc/configs/motionpro_defconfig
+++ b/arch/powerpc/configs/motionpro_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rc9
-# Fri Oct 5 12:54:17 2007
+# Fri Oct 5 15:18:42 2007
#
# CONFIG_PPC64 is not set
@@ -610,6 +610,7 @@ CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+CONFIG_LEDS_MOTIONPRO=y
#
# LED Triggers
diff --git a/arch/powerpc/platforms/52xx/motionpro.c b/arch/powerpc/platforms/52xx/motionpro.c
index 2cf8a47..c1bcfd2 100644
--- a/arch/powerpc/platforms/52xx/motionpro.c
+++ b/arch/powerpc/platforms/52xx/motionpro.c
@@ -86,10 +86,48 @@ error:
iounmap(gpio);
}
+
+#ifdef CONFIG_LEDS_MOTIONPRO
+
+/* Initialize GPT register connected to LED. Turn off LED. */
+static void motionpro_setup_led(const char *reg_path)
+{
+ void __iomem *reg_addr;
+ u32 reg;
+
+ reg_addr = mpc52xx_find_and_map_path(reg_path);
+ if (!reg_addr){
+ printk(KERN_ERR __FILE__ ": "
+ "LED setup error: can't map GPIO register %s\n",
+ reg_path);
+ return;
+ }
+
+ reg = in_be32(reg_addr);
+ reg |= MPC52xx_GPT_ENABLE_OUTPUT;
+ reg &= ~MPC52xx_GPT_OUTPUT_1;
+ out_be32(reg_addr, reg);
+
+ iounmap(reg_addr);
+}
+
+/* Initialize Motionpro status and ready LEDs */
+static void motionpro_setup_leds(void)
+{
+ motionpro_setup_led("/soc5200@f0000000/gpt@660");
+ motionpro_setup_led("/soc5200@f0000000/gpt@670");
+}
+
+#endif
+
static void __init motionpro_setup_arch(void)
{
struct device_node *np;
+#ifdef CONFIG_LEDS_MOTIONPRO
+ motionpro_setup_leds();
+#endif
+
if (ppc_md.progress)
ppc_md.progress("motionpro_setup_arch()", 0);
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 4468cb3..f027009 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -55,6 +55,13 @@ config LEDS_TOSA
This option enables support for the LEDs on Sharp Zaurus
SL-6000 series.
+config LEDS_MOTIONPRO
+ tristate "Motionpro LEDs Support"
+ depends on LEDS_CLASS
+ help
+ This option enables support for status and ready LEDs connected
+ to GPIO lines on Motionpro board.
+
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS && ARCH_S3C2410
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index f8995c9..6b45be1 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
+obj-$(CONFIG_LEDS_MOTIONPRO) += leds-motionpro.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
# LED Triggers
diff --git a/drivers/leds/leds-motionpro.c b/drivers/leds/leds-motionpro.c
new file mode 100644
index 0000000..273e375
--- /dev/null
+++ b/drivers/leds/leds-motionpro.c
@@ -0,0 +1,221 @@
+/*
+ * LEDs driver for the Motionpro board.
+ *
+ * Copyright (C) 2007 Semihalf
+ *
+ * Author: Jan Wrobel <wrr@semihalf.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc., 51
+ * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ *
+ * This driver enables control over Motionpro's status and ready LEDs through
+ * sysfs. LEDs can be controlled by writing to sysfs files:
+ * class/leds/motionpro-(ready|status)led/(brightness|delay_off|delay_on).
+ * See Documentation/leds-class.txt for more details
+ *
+ * Before user issues first control command via sysfs, LED blinking is
+ * controlled by the kernel. By default status LED is blinking fast and ready
+ * LED is turned off.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/leds.h>
+
+#include <asm/mpc52xx.h>
+#include <asm/io.h>
+
+/* Led status */
+#define LED_NOT_REGISTERED 0
+#define LED_KERNEL_CONTROLLED 1
+#define LED_USER_CONTROLLED 2
+
+
+/* Led control bits */
+#define LED_ON MPC52xx_GPT_OUTPUT_1
+
+static void mpled_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness);
+
+static struct motionpro_led{
+ /* Protects the led data */
+ spinlock_t led_lock;
+
+ /* Path to led's control register DTS node */
+ char *reg_path;
+
+ /* Address to access led's register */
+ void __iomem *reg_addr;
+
+ int status;
+
+ /* Blinking timer used when led is controlled by the kernel */
+ struct timer_list kernel_mode_timer;
+
+ /*
+ * Delay between blinks when led is controlled by the kernel.
+ * If set to 0 led blinking is off.
+ */
+ int kernel_mode_delay;
+
+ struct led_classdev classdev;
+}led[] = {
+ {
+ .reg_path = "/soc5200@f0000000/gpt@660",
+ .reg_addr = 0,
+ .led_lock = SPIN_LOCK_UNLOCKED,
+ .status = LED_NOT_REGISTERED,
+ .kernel_mode_delay = HZ / 10,
+ .classdev = {
+ .name = "motionpro-statusled",
+ .brightness_set = mpled_set,
+ .default_trigger = "timer",
+ },
+ },
+ {
+ .reg_path = "/soc5200@f0000000/gpt@670",
+ .reg_addr = 0,
+ .led_lock = SPIN_LOCK_UNLOCKED,
+ .status = LED_NOT_REGISTERED,
+ .kernel_mode_delay = 0,
+ .classdev = {
+ .name = "motionpro-readyled",
+ .brightness_set = mpled_set,
+ .default_trigger = "timer",
+ }
+ }
+};
+
+/* Timer event - blinks led before user takes control over it */
+static void mpled_timer_toggle(unsigned long ptr)
+{
+ struct motionpro_led *mled = (struct motionpro_led *) ptr;
+
+ spin_lock_bh(&mled->led_lock);
+ if (mled->status == LED_KERNEL_CONTROLLED){
+ u32 reg = in_be32(mled->reg_addr);
+ reg ^= LED_ON;
+ out_be32(mled->reg_addr, reg);
+ led->kernel_mode_timer.expires = jiffies +
+ led->kernel_mode_delay;
+ add_timer(&led->kernel_mode_timer);
+ }
+ spin_unlock_bh(&mled->led_lock);
+}
+
+
+/*
+ * Turn on/off led according to user settings in sysfs.
+ * First call to this function disables kernel blinking.
+ */
+static void mpled_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct motionpro_led *mled;
+ u32 reg;
+
+ mled = container_of(led_cdev, struct motionpro_led, classdev);
+
+ spin_lock_bh(&mled->led_lock);
+ mled->status = LED_USER_CONTROLLED;
+
+ reg = in_be32(mled->reg_addr);
+ if (brightness)
+ reg |= LED_ON;
+ else
+ reg &= ~LED_ON;
+ out_be32(mled->reg_addr, reg);
+
+ spin_unlock_bh(&mled->led_lock);
+}
+
+static void mpled_init_led(void __iomem *reg_addr)
+{
+ u32 reg = in_be32(reg_addr);
+ reg |= MPC52xx_GPT_ENABLE_OUTPUT;
+ reg &= ~LED_ON;
+ out_be32(reg_addr, reg);
+}
+
+static void mpled_clean(void)
+{
+ int i;
+ for (i = 0; i < sizeof(led) / sizeof(struct motionpro_led); i++){
+ if (led[i].status != LED_NOT_REGISTERED){
+ spin_lock_bh(&led[i].led_lock);
+ led[i].status = LED_NOT_REGISTERED;
+ spin_unlock_bh(&led[i].led_lock);
+ led_classdev_unregister(&led[i].classdev);
+ }
+ if (led[i].reg_addr){
+ iounmap(led[i].reg_addr);
+ led[i].reg_addr = 0;
+ }
+ }
+}
+
+static int __init mpled_init(void)
+{
+ int i, error;
+
+ for (i = 0; i < sizeof(led) / sizeof(struct motionpro_led); i++){
+ led[i].reg_addr = mpc52xx_find_and_map_path(led[i].reg_path);
+ if (!led[i].reg_addr){
+ printk(KERN_ERR __FILE__ ": "
+ "Error while mapping GPIO register for LED %s\n",
+ led[i].classdev.name);
+ error = -EIO;
+ goto err;
+ }
+
+ mpled_init_led(led[i].reg_addr);
+ led[i].status = LED_KERNEL_CONTROLLED;
+ if (led[i].kernel_mode_delay){
+ init_timer(&led[i].kernel_mode_timer);
+ led[i].kernel_mode_timer.function = mpled_timer_toggle;
+ led[i].kernel_mode_timer.data = (unsigned long)&led[i];
+ led[i].kernel_mode_timer.expires =
+ jiffies + led[i].kernel_mode_delay;
+ add_timer(&led[i].kernel_mode_timer);
+ }
+
+ if ((error = led_classdev_register(NULL, &led[i].classdev)) < 0){
+ printk(KERN_ERR __FILE__ ": "
+ "Error while registering class device for LED "
+ "%s\n",
+ led[i].classdev.name);
+ goto err;
+ }
+ }
+
+ printk("Motionpro LEDs driver initialized\n");
+ return 0;
+err:
+ mpled_clean();
+ return error;
+}
+
+static void __exit mpled_exit(void)
+{
+ mpled_clean();
+}
+
+module_init(mpled_init);
+module_exit(mpled_exit);
+
+MODULE_LICENSE("GPL")
+MODULE_DESCRIPTION("LEDs support for Motionpro");
+MODULE_AUTHOR("Jan Wrobel <wrr@semihalf.com>");
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
index 4707de6..a431798 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/include/asm-powerpc/mpc52xx.h
@@ -140,6 +140,11 @@ struct mpc52xx_gpio {
#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5
#define MPC52xx_GPIO_PCI_DIS (1<<15)
+/* Enables GPT register to operate as simple GPIO output register */
+#define MPC52xx_GPT_ENABLE_OUTPUT 0x00000024
+/* Puts 1 on GPT output pin */
+#define MPC52xx_GPT_OUTPUT_1 0x00000010
+
/* GPIO with WakeUp*/
struct mpc52xx_gpio_wkup {
u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */
^ permalink raw reply related
* [PATCH 12/15] [POWERPC] Add mpc52xx_restart(), mpc52xx_halt(), mpc52xx_power_off().
From: Marian Balakowicz @ 2007-10-07 11:32 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Add common MPC5200 helper routines: mpc52xx_restart(), mpc52xx_halt(),
mpc52xx_power_off().
This patch relies on Sascha Hauer's patch published in:
http://patchwork.ozlabs.org/linuxppc/patch?id=8910.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/powerpc/platforms/52xx/mpc52xx_common.c | 45 +++++++++++++++++++++++++++
include/asm-powerpc/mpc52xx.h | 7 ++++
2 files changed, 52 insertions(+)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index b1cd7b0..e7087d7 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -88,6 +88,14 @@ mpc52xx_find_ipb_freq(struct device_node *node)
}
EXPORT_SYMBOL(mpc52xx_find_ipb_freq);
+/*
+ * This variable is mapped in mpc52xx_setup_cpu() by a call to
+ * mpc52xx_find_and_map(), and used in mpc52xx_restart(). This is because
+ * mpc52xx_restart() can be called from interrupt context (e.g., watchdog
+ * interrupt handler), and mpc52xx_find_and_map() (ioremap() to be exact)
+ * can't be called from interrupt context.
+ */
+volatile struct mpc52xx_gpt *mpc52xx_gpt0 = NULL;
void __init
mpc52xx_setup_cpu(void)
@@ -95,6 +103,9 @@ mpc52xx_setup_cpu(void)
struct mpc52xx_cdm __iomem *cdm;
struct mpc52xx_xlb __iomem *xlb;
+ /* mpc52xx_gpt0 is mapped here and used in mpc52xx_restart */
+ mpc52xx_gpt0 = mpc52xx_find_and_map("mpc5200-gpt");
+
/* Map zones */
cdm = mpc52xx_find_and_map("mpc5200-cdm");
xlb = mpc52xx_find_and_map("mpc5200-xlb");
@@ -138,3 +149,37 @@ mpc52xx_declare_of_platform_devices(void)
"Error while probing of_platform bus\n");
}
+void
+mpc52xx_restart(char *cmd)
+{
+ local_irq_disable();
+
+ /* Turn on the watchdog and wait for it to expire. It effectively
+ does a reset */
+ if (mpc52xx_gpt0) {
+ out_be32(&mpc52xx_gpt0->mode, 0x00000000);
+ out_be32(&mpc52xx_gpt0->count, 0x000000ff);
+ out_be32(&mpc52xx_gpt0->mode, 0x00009004);
+ } else
+ printk("mpc52xx_restart: Can't access gpt. "
+ "Restart impossible, system halted\n");
+
+ while (1);
+}
+
+void
+mpc52xx_halt(void)
+{
+ local_irq_disable();
+
+ while (1);
+}
+
+void
+mpc52xx_power_off(void)
+{
+ /* By default we don't have any way of shut down.
+ If a specific board wants to, it can set the power down
+ code to any hardware implementation dependent code */
+ mpc52xx_halt();
+}
diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h
index a431798..8dfb4de 100644
--- a/include/asm-powerpc/mpc52xx.h
+++ b/include/asm-powerpc/mpc52xx.h
@@ -104,6 +104,9 @@ struct mpc52xx_gpt {
u32 status; /* GPTx + 0X0c */
};
+/* Static instance of GPT0 */
+extern volatile struct mpc52xx_gpt *mpc52xx_gpt0;
+
/* GPIO */
struct mpc52xx_gpio {
u32 port_config; /* GPIO + 0x00 */
@@ -257,6 +260,10 @@ extern unsigned int mpc52xx_get_irq(void);
extern int __init mpc52xx_add_bridge(struct device_node *node);
+extern void mpc52xx_restart(char *cmd);
+extern void mpc52xx_halt(void);
+extern void mpc52xx_power_off(void);
+
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_PM
^ permalink raw reply related
* [PATCH 13/15] [POWERPC] Init restart/halt/power_off machine hooks for TQM5200.
From: Marian Balakowicz @ 2007-10-07 11:32 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Initialize restart/halt/power_off machine hooks in TQM5200 board
platform code.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
tqm5200.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/powerpc/platforms/52xx/tqm5200.c b/arch/powerpc/platforms/52xx/tqm5200.c
index 780b79f..09151d6 100644
--- a/arch/powerpc/platforms/52xx/tqm5200.c
+++ b/arch/powerpc/platforms/52xx/tqm5200.c
@@ -171,4 +171,7 @@ define_machine(tqm5200) {
.get_irq = mpc52xx_get_irq,
.show_cpuinfo = tqm5200_show_cpuinfo,
.calibrate_decr = generic_calibrate_decr,
+ .restart = mpc52xx_restart,
+ .halt = mpc52xx_halt,
+ .power_off = mpc52xx_power_off,
};
^ permalink raw reply related
* [PATCH 14/15] [POWERPC] Init restart/halt/power_off machine hooks for CM5200.
From: Marian Balakowicz @ 2007-10-07 11:35 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>
Initialize restart/halt/power_off machine hooks in CM5200 board
platform code.
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
cm5200.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/powerpc/platforms/52xx/cm5200.c b/arch/powerpc/platforms/52xx/cm5200.c
index 9d3b1f2..9e18bfe 100644
--- a/arch/powerpc/platforms/52xx/cm5200.c
+++ b/arch/powerpc/platforms/52xx/cm5200.c
@@ -158,4 +158,7 @@ define_machine(cm5200) {
.get_irq = mpc52xx_get_irq,
.show_cpuinfo = cm5200_show_cpuinfo,
.calibrate_decr = generic_calibrate_decr,
+ .restart = mpc52xx_restart,
+ .halt = mpc52xx_halt,
+ .power_off = mpc52xx_power_off,
};
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox