LinuxPPC-Dev Archive on lore.kernel.org

* [PATCH 01/15] [POWERPC] TQM5200 DTS
From: Marian Balakowicz @ 2007-10-07 11:15 UTC (permalink / raw)
  Cc: linuxppc-dev
In-Reply-To: <47075FA7.3030108@semihalf.com>


Add device tree source file for TQM5200 board.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Martin Krause <martin.krause@tqs.de>
---

 tqm5200.dts |  217 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 217 insertions(+)

diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
new file mode 100644
index 0000000..e3e0ebf
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -0,0 +1,217 @@
+/*
+ * TQM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Modified for TQM5200 by Marian Balakowicz <m8@semihalf.com>
+ *
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+	model = "fsl,tqm5200";
+	compatible = "fsl,tqm5200\0generic-mpc5200";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;
+			i-cache-line-size = <20>;
+			d-cache-size = <4000>;		// L1, 16K
+			i-cache-size = <4000>;		// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		model = "fsl,mpc5200";
+		compatible = "mpc5200";
+		revision = "";			// from bootloader
+		#interrupt-cells = <3>;
+		device_type = "soc";
+		ranges = <0 f0000000 f0010000>;
+		reg = <f0000000 00010000>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "mpc5200b-cdm\0mpc5200-cdm";
+			reg = <200 38>;
+		};
+
+		mpc5200_pic: pic@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			device_type = "interrupt-controller";
+			compatible = "mpc5200-pic";
+			reg = <500 80>;
+			built-in;
+		};
+
+		gpt@600 {	// General Purpose Timer
+			compatible = "mpc5200-gpt";
+			device_type = "gpt";
+			cell-index = <0>;
+			reg = <600 10>;
+			interrupts = <1 9 0>;
+			interrupt-parent = <&mpc5200_pic>;
+			has-wdt;
+		};
+
+		gpio@b00 {
+			compatible = "mpc5200-gpio";
+			reg = <b00 40>;
+			interrupts = <1 7 0>;
+			interrupt-parent = <&mpc5200_pic>;
+		};
+
+		usb@1000 {
+			device_type = "usb-ohci-be";
+			compatible = "mpc5200-ohci\0ohci-be";
+			reg = <1000 ff>;
+			interrupts = <2 6 0>;
+			interrupt-parent = <&mpc5200_pic>;
+		};
+
+		pci@0d00 {
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			compatible = "mpc5200-pci";
+			reg = <d00 100>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
+			                 c000 0 0 2 &mpc5200_pic 0 0 3
+			                 c000 0 0 3 &mpc5200_pic 0 0 3
+			                 c000 0 0 4 &mpc5200_pic 0 0 3>;
+			clock-frequency = <0>; // From boot loader
+			interrupts = <2 8 0 2 9 0 2 a 0>;
+			interrupt-parent = <&mpc5200_pic>;
+			bus-range = <0 0>;
+			ranges = <42000000 0 80000000 80000000 0 10000000
+			          02000000 0 90000000 90000000 0 10000000
+			          01000000 0 00000000 a0000000 0 01000000>;
+		};
+
+		bestcomm@1200 {
+			device_type = "dma-controller";
+			compatible = "mpc5200-bestcomm";
+			reg = <1200 80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 a 0  3 b 0
+			              3 c 0  3 d 0  3 e 0  3 f 0>;
+			interrupt-parent = <&mpc5200_pic>;
+		};
+
+		xlb@1f00 {
+			compatible = "mpc5200-xlb";
+			reg = <1f00 100>;
+		};
+
+		serial@2000 {		// PSC1
+			device_type = "serial";
+			compatible = "mpc5200-psc-uart";
+			port-number = <0>;  // Logical port assignment
+			cell-index = <0>;
+			reg = <2000 100>;
+			interrupts = <2 1 0>;
+			interrupt-parent = <&mpc5200_pic>;
+		};
+
+		serial@2200 {		// PSC2
+			device_type = "serial";
+			compatible = "mpc5200-psc-uart";
+			port-number = <1>;  // Logical port assignment
+			cell-index = <1>;
+			reg = <2200 100>;
+			interrupts = <2 2 0>;
+			interrupt-parent = <&mpc5200_pic>;
+		};
+
+		serial@2400 {		// PSC3
+			device_type = "serial";
+			compatible = "mpc5200-psc-uart";
+			port-number = <2>;  // Logical port assignment
+			cell-index = <2>;
+			reg = <2400 100>;
+			interrupts = <2 3 0>;
+			interrupt-parent = <&mpc5200_pic>;
+		};
+
+		ethernet@3000 {
+			device_type = "network";
+			compatible = "mpc5200-fec";
+			reg = <3000 800>;
+			interrupts = <2 5 0>;
+			interrupt-parent = <&mpc5200_pic>;
+		};
+
+		ata@3a00 {
+			device_type = "ata";
+			compatible = "mpc5200b-ata\0mpc5200-ata";
+			reg = <3a00 100>;
+			interrupts = <2 7 0>;
+			interrupt-parent = <&mpc5200_pic>;
+		};
+
+		i2c@3d40 {
+			device_type = "i2c";
+			compatible = "mpc5200-i2c\0fsl-i2c";
+			cell-index = <1>;
+			reg = <3d40 40>;
+			interrupts = <2 10 0>;
+			interrupt-parent = <&mpc5200_pic>;
+			fsl5200-clocking;
+		};
+
+		sram@8000 {
+			device_type = "sram";
+			compatible = "mpc5200-sram\0sram";
+			reg = <8000 4000>;
+		};
+
+		flash@c000000 {
+			device_type = "rom";
+			compatible = "direct-mapped";
+			reg = <0c000000 02000000>;
+			probe-type = "CFI";
+			bank-width = <4>;
+			partitions = <00000000 000a0000
+				      000a0000 00020000
+				      000c0000 00240000
+				      00300000 00200000
+				      00500000 00400000
+				      00900000 00800000
+				      01100000 00f00000>;
+			partition-names = "firmware\0dtb\0kernel\0initrd\0small-fs\0misc\0big-fs";
+		};
+	};
+};

^ permalink raw reply related