LinuxPPC-Dev Archive on lore.kernel.org

* Re: [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers
From: Heiko Schocher @ 2008-01-10  8:14 UTC (permalink / raw)
  To: Scott Wood; +Cc: linuxppc-dev, Jeff Garzik
In-Reply-To: <20080109182038.GA4337@loki.buserror.net>

Hello Scott,

Scott Wood wrote:
> On Wed, Jan 09, 2008 at 01:58:49PM +0100, Heiko Schocher wrote:
>> @@ -1312,6 +1312,9 @@ static int __devinit fs_enet_probe(struct of_device *ofdev,
>>  	       ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2],
>>  	       ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]);
>>
>> +	/* to initialize the fep->cur_rx,... */
>> +	/* not doing this, will cause a crash in fs_enet_rx_napi */
>> +	fs_init_bds(ndev);
>>  	return 0;
> 
> We don't want to allocate ring buffers for network interfaces that are never
> opened, especially given the small amount of memory on some boards that use
> this driver.
> 
> Instead, we should probably not be calling napi_enable() until the link is
> up and init_bds() has been called.

Ah, okay. I actually tried calling fs_init_bds(ndev); in fs_enet_open() after
napi_enable, and this also works fine. I think there is the better place for
it. Thanks.

> 
>> @@ -1342,9 +1345,13 @@ static int fs_enet_remove(struct of_device *ofdev)
>>  }
>>
>>  static struct of_device_id fs_enet_match[] = {
>> -#ifdef CONFIG_FS_ENET_HAS_SCC
>> +#if defined(CONFIG_FS_ENET_HAS_SCC)
>>  	{
>> +#if defined(CONFIG_CPM1)
>>  		.compatible = "fsl,cpm1-scc-enet",
>> +#else
>> +		.compatible = "fsl,cpm2-scc-enet",
>> +#endif
> 
> I know there are already ifdefs of this sort, and that multiplatform
> cpm1/cpm2 is very unlikely to ever happen, but can we try to avoid
> introducing more such ifdefs?
> 
> We can have both match entries present at the same time.

OK, fix this.

> 
>>  		.data = (void *)&fs_scc_ops,
>>  	},
>>  #endif
>> diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
>> index 48f2f30..3b5ca76 100644
>> --- a/drivers/net/fs_enet/mac-scc.c
>> +++ b/drivers/net/fs_enet/mac-scc.c
>> @@ -50,6 +50,7 @@
>>  #include "fs_enet.h"
>>
>>  /*************************************************/
>> +#define SCC_EB ((u_char)0x10)  /* Set big endian byte order */
> 
> This is already defined in asm-powerpc/commproc.h, and thus will cause a
> duplicate definition when building for 8xx.  Please add this definition to
> asm-powerpc/cpm2.h.

OK, will fix it.

> 
>> +#if defined(CONFIG_CPM1)
>>  	W16(cpmp, cp_cpcr, fpi->cp_command | CPM_CR_FLG | (op << 8));
>>  	for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
>>  		if ((R16(cpmp, cp_cpcr) & CPM_CR_FLG) == 0)
>>  			return 0;
>> +#else
>> +	W32(cpmp, cp_cpcr, fpi->cp_command | CPM_CR_FLG | op);
>> +	for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
>> +		if ((R32(cpmp, cp_cpcr) & CPM_CR_FLG) == 0)
>> +			return 0;
>> +
>> +#endif
> 
> Commit 362f9b6fa8c9670cc5496390845021c2865d049b in Paul's tree makes this
> unnecessary.

Tried this patch, works fine for me :-)

> 
>> @@ -306,8 +317,15 @@ static void restart(struct net_device *dev)
>>
>>  	/* Initialize function code registers for big-endian.
>>  	 */
>> +#ifdef CONFIG_CPM2
>> +	/* from oldstyle driver in arch/ppc */
>> +	/* seems necessary */
>> +	W8(ep, sen_genscc.scc_rfcr, SCC_EB | 0x20);
>> +	W8(ep, sen_genscc.scc_tfcr, SCC_EB | 0x20);
>> +#else
>>  	W8(ep, sen_genscc.scc_rfcr, SCC_EB);
>>  	W8(ep, sen_genscc.scc_tfcr, SCC_EB);
>> +#endif
> 
> Please define 0x20 as SCC_GBL (Snooping Enabled) in cpm2.h, and
> conditionalize this on #ifndef CONFIG_NOT_COHERENT_CACHE.
> 
> You can remove the comment; it's really necessary, not just "seems" so. :-)

OK, fix it.

Will resend this fixed patch.

thanks
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

^ permalink raw reply