* Re: ml310 kernel2.6 booting problems
From: Jean-Samuel Chenard @ 2008-01-18 2:49 UTC (permalink / raw)
To: Jogi95; +Cc: linuxppc-embedded
> Date: Thu, 17 Jan 2008 21:19:04 +0100
> From: Joachim Meyer
> Hmmm... I'm not really ready to invest that much time into the PCI for ML=
-310.
> -------------------------------------------------------------------------=
-------
> http://ozlabs.org/pipermail/linuxppc-embedded/2007-December/029211.html
>
> How much work would it be (approximated), and do you think I can success =
(I'm a novice, like you know)?
> Would you help me (Tell me where to start & what to do)?
Hi Joachim,
I was also interested in getting the PCI to run on the ML-310. I did
spend an evening trying to integrate a patch sent over by Stephen
Neuendorffer from Xilinx. I managed to get everything to compile
(basically I fixed a few missing macros and had to search a bit to
ensure that the memory mapping was correctly ported). Unfortunately,
when I tried the new kernel, I think that I must have messed something
up with the interrupt mappings (I am a newbie to PCI) and I had to
remove some interrupt mapping from Stephen's patch.
In any case, my ML-310 was booting the Linux kernel, but something was
not right and I did not get anymore printouts from the UART Lite.
Since I don't have the JTAG cable, I was stuck at this point with
little means to debug the system. One day I'll spoil myself with one
of those platform JTAG USB cables...
I used Z-modem to transfer files to/from my workstation to my CF card
on the ML-310 and this was an acceptable compromise.
I'd still be interested in having the PCI bus working on the ML-310,
but now that I got my BEE2 booting Linux 2.6, its not such a big
priority for me. Let me know if you have some success in that
direction.
Regards,
Jean-Samuel
--=20
Integrated Microsystems Laboratory
McGill University, Montr=E9al, QC, CANADA
Web Page: http://chaos.ece.mcgill.ca
^ permalink raw reply
* Re: 2.6.24-rc8-mm1: powerpc oopses
From: Matt Mackall @ 2008-01-18 1:16 UTC (permalink / raw)
To: Andrew Morton; +Cc: linuxppc-dev, m.kozlowski, paulus, linux-kernel
In-Reply-To: <20080117170754.b5dd139b.akpm@linux-foundation.org>
On Thu, 2008-01-17 at 17:07 -0800, Andrew Morton wrote:
> That worked out nicely.
Cool, feel free to add:
Signed-off-by: Matt Mackall <mpm@selenic.com>
> Wasn't the old code potentially pte_unmap()ping the wrong address? If we
> enter with addr==end?
Yes, that was busted.
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply
* Re: 2.6.24-rc8-mm1: powerpc oopses
From: Andrew Morton @ 2008-01-18 1:07 UTC (permalink / raw)
To: Matt Mackall; +Cc: linuxppc-dev, m.kozlowski, paulus, linux-kernel
In-Reply-To: <1200617237.3839.32.camel@cinder.waste.org>
On Thu, 17 Jan 2008 18:47:17 -0600
Matt Mackall <mpm@selenic.com> wrote:
>
> On Thu, 2008-01-17 at 16:29 -0800, Andrew Morton wrote:
> > Do we need `offset' at all?
>
> Looks like no.
>
> I wonder if there's a good argument for adding a pte_offset_val() which
> would let us do:
>
> pteval = pte_offset_val(pmd, addr);
>
> and shrink the map/unmap window and overhead here and possibly
> elsewhere?
>
> Anyway, updated but still untested patch now with revealing comment:
>
> diff -r 5595adaea70f fs/proc/task_mmu.c
> --- a/fs/proc/task_mmu.c Thu Jan 17 13:26:54 2008 -0600
> +++ b/fs/proc/task_mmu.c Thu Jan 17 18:45:57 2008 -0600
> @@ -584,18 +585,19 @@
> pte_t *pte;
> int err = 0;
>
> - pte = pte_offset_map(pmd, addr);
> - for (; addr != end; pte++, addr += PAGE_SIZE) {
> + for (; addr != end; addr += PAGE_SIZE) {
> u64 pfn = PM_NOT_PRESENT;
> + pte = pte_offset_map(pmd, addr);
> if (is_swap_pte(*pte))
> pfn = swap_pte_to_pagemap_entry(*pte);
> else if (pte_present(*pte))
> pfn = pte_pfn(*pte);
> + /* unmap so we're not in atomic when we copy to userspace */
> + pte_unmap(pte);
> err = add_to_pagemap(addr, pfn, pm);
> if (err)
> return err;
> }
> - pte_unmap(pte - 1);
>
> cond_resched();
That worked out nicely.
Wasn't the old code potentially pte_unmap()ping the wrong address? If we
enter with addr==end?
^ permalink raw reply
* [PATCH] [POWERPC] Fix a couple of copyright symbols
From: Stephen Rothwell @ 2008-01-18 1:06 UTC (permalink / raw)
To: paulus; +Cc: ppc-dev
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/powerpc/kernel/systbl_chk.c | 2 +-
arch/powerpc/kernel/systbl_chk.sh | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
Patchwork strikes again. :-(
diff --git a/arch/powerpc/kernel/systbl_chk.c b/arch/powerpc/kernel/systbl_chk.c
index 77824d1..238aa63 100644
--- a/arch/powerpc/kernel/systbl_chk.c
+++ b/arch/powerpc/kernel/systbl_chk.c
@@ -6,7 +6,7 @@
* Unfortunately, we cannot check for the correct ordering of entries
* using SYSX().
*
- * Copyright © IBM Corporation
+ * Copyright © IBM Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/arch/powerpc/kernel/systbl_chk.sh b/arch/powerpc/kernel/systbl_chk.sh
index 367d208..19415e7 100644
--- a/arch/powerpc/kernel/systbl_chk.sh
+++ b/arch/powerpc/kernel/systbl_chk.sh
@@ -3,7 +3,7 @@
# Just process the CPP output from systbl_chk.c and complain
# if anything is out of order.
#
-# Copyright © 2008 IBM Corporation
+# Copyright © 2008 IBM Corporation
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
--
1.5.3.8
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
^ permalink raw reply related
* Re: Patches added to master/for-2.6.25 branch of powerpc.git
From: Stephen Rothwell @ 2008-01-18 0:56 UTC (permalink / raw)
To: Paul Mackerras; +Cc: linuxppc-dev
In-Reply-To: <478F6DCA.5020000@semihalf.com>
[-- Attachment #1: Type: text/plain, Size: 254 bytes --]
How about "[POWERPC] make ibmebus use of_(un)register_driver"
(http://patchwork.ozlabs.org/linuxppc/patch?id=16128)? It was acked by
Joachim.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* Re: 2.6.24-rc8-mm1: powerpc oopses
From: Matt Mackall @ 2008-01-18 0:47 UTC (permalink / raw)
To: Andrew Morton; +Cc: linuxppc-dev, m.kozlowski, paulus, linux-kernel
In-Reply-To: <20080117162913.0323c517.akpm@linux-foundation.org>
On Thu, 2008-01-17 at 16:29 -0800, Andrew Morton wrote:
> Do we need `offset' at all?
Looks like no.
I wonder if there's a good argument for adding a pte_offset_val() which
would let us do:
pteval = pte_offset_val(pmd, addr);
and shrink the map/unmap window and overhead here and possibly
elsewhere?
Anyway, updated but still untested patch now with revealing comment:
diff -r 5595adaea70f fs/proc/task_mmu.c
--- a/fs/proc/task_mmu.c Thu Jan 17 13:26:54 2008 -0600
+++ b/fs/proc/task_mmu.c Thu Jan 17 18:45:57 2008 -0600
@@ -584,18 +585,19 @@
pte_t *pte;
int err = 0;
- pte = pte_offset_map(pmd, addr);
- for (; addr != end; pte++, addr += PAGE_SIZE) {
+ for (; addr != end; addr += PAGE_SIZE) {
u64 pfn = PM_NOT_PRESENT;
+ pte = pte_offset_map(pmd, addr);
if (is_swap_pte(*pte))
pfn = swap_pte_to_pagemap_entry(*pte);
else if (pte_present(*pte))
pfn = pte_pfn(*pte);
+ /* unmap so we're not in atomic when we copy to userspace */
+ pte_unmap(pte);
err = add_to_pagemap(addr, pfn, pm);
if (err)
return err;
}
- pte_unmap(pte - 1);
cond_resched();
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply
* Re: [PATCH/RFCv2] [POWERPC] Add support for freescale watchdog to CPM serial driver.
From: Stephen Rothwell @ 2008-01-18 0:38 UTC (permalink / raw)
To: Jochen Friedrich; +Cc: Scott Wood, linuxppc-dev, linux-kernel
In-Reply-To: <478F4AE3.5090803@scram.de>
[-- Attachment #1: Type: text/plain, Size: 684 bytes --]
On Thu, 17 Jan 2008 13:32:35 +0100 Jochen Friedrich <jochen@scram.de> wrote:
>
> If a freescale watchdog device node is present, reset the watchdog
> while waiting for serial input.
>
> Signed-off-by: Jochen Friedrich <jochen@scram.de>
> ---
> arch/powerpc/boot/Makefile | 2 +-
> arch/powerpc/boot/cpm-serial.c | 6 ++++
> arch/powerpc/boot/cuboot-8xx.c | 1 +
> arch/powerpc/boot/ops.h | 2 +
> arch/powerpc/boot/watchdog.c | 65 ++++++++++++++++++++++++++++++++++++++++
I am just wondering if maybe that file name is to generic.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* Re: [Add mpc5121 support PATCHES v3 0/8]
From: Grant Likely @ 2008-01-18 0:35 UTC (permalink / raw)
To: John Rigby; +Cc: linuxppc-dev
In-Reply-To: <1200614738-25654-1-git-send-email-jrigby@freescale.com>
On 1/17/08, John Rigby <jrigby@freescale.com> wrote:
> This is a new improved set of patches based on the
> comments that I received in response to the previous set.
>
> Changes since v2:
>
> 1/8 Add-IPIC-config-option.patch
> 2/8 Add-mpc512x-ipic-support.patch
> No changes. These two are in galak's queue for submission.
>
> 3/8 Basic-Freescale-MPC512x-support.patch
> Added missing of_put_node as pointed out by Stephen Rothwell
> Added Acked-by: Grant Likely <grant.likely@secretlab.ca>
>
> 4/8 Device-tree-for-MPC5121-ADS.patch
> Made changes suggested by Grant Likely
>
> 5/8 Separate-MPC52xx-PSC-FIFO-registers-from-rest-of-PSC.patch
> 6/8 Cleanup-checkpatch.pl-problems-in-mpc52xx_uart.c.patch
> No changes. Grant is picking up these patches
>
> 7/8 Factor-out-52xx-dependencies-from-52xx-psc-driver.patch
> No changes. No comments received. Too ugly to comment?
No; I'm just percolating on these two. I'll probably pick these up,
but I need to look at them in greater detail first.
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* RE: Problems with PCI on 8280
From: Rune Torgersen @ 2008-01-18 0:27 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
In-Reply-To: <478FE248.1030101@freescale.com>
[-- Attachment #1: Type: text/plain, Size: 903 bytes --]
From: Scott Wood
>Hmm... that suggests that something in u-boot's setup is either
>incorrect, or (more likely in this case) doesn't match the device tree.
Turns out u-boot was not setting u the inbound window size correctly.
It was hardcoded to 512MB and we have a gig of ram. Set it correctly, and CPI now works fully even without fixup_pci()
>Ah. Yes, I was assuming both windows would be the same size. The code
>should be changed to check that, and if any conditions for setting
>PCIBRx/PCIMSKx fail, check to see if the firmware-provided values work
>(and if not, bail without touching anything).
yup. In our case we only need one window.
BTW. there is a bug in the inbound window size calculation.
The mem_log2 variable sould be the shift value, not 1<< shift.
and on the next line the window size mask sould be anded with 0x000f_ffff before or'ed with 0xa000_0000
[-- Attachment #2: Type: text/html, Size: 1386 bytes --]
^ permalink raw reply
* Re: 2.6.24-rc8-mm1: powerpc oopses
From: Andrew Morton @ 2008-01-18 0:29 UTC (permalink / raw)
To: Matt Mackall; +Cc: linuxppc-dev, m.kozlowski, paulus, linux-kernel
In-Reply-To: <1200615168.3839.26.camel@cinder.waste.org>
On Thu, 17 Jan 2008 18:12:48 -0600
Matt Mackall <mpm@selenic.com> wrote:
>
> > Do we need the ifdef? pte_offset_map/pte_unmap should be super-cheap on
> > !CONFIG_HIGHPTE builds.
>
> In that case, pte_unmap is free, pte_offset_map is just a bit of math.
> So yeah, we can simplify this. How about:
>
> diff -r 5595adaea70f fs/proc/task_mmu.c
> --- a/fs/proc/task_mmu.c Thu Jan 17 13:26:54 2008 -0600
> +++ b/fs/proc/task_mmu.c Thu Jan 17 18:11:13 2008 -0600
> @@ -582,20 +583,20 @@
> {
> struct pagemapread *pm = private;
> pte_t *pte;
> - int err = 0;
> + int offset = 0, err = 0;
>
> - pte = pte_offset_map(pmd, addr);
> - for (; addr != end; pte++, addr += PAGE_SIZE) {
> + for (; addr != end; offset++, addr += PAGE_SIZE) {
> u64 pfn = PM_NOT_PRESENT;
> - if (is_swap_pte(*pte))
> - pfn = swap_pte_to_pagemap_entry(*pte);
> - else if (pte_present(*pte))
> - pfn = pte_pfn(*pte);
> + pte = pte_offset_map(pmd, addr);
> + if (is_swap_pte(pte[offset]))
> + pfn = swap_pte_to_pagemap_entry(pte[offset]);
> + else if (pte_present(pte[offset]))
> + pfn = pte_pfn(pte[offset]);
> + pte_unmap(pte);
> err = add_to_pagemap(addr, pfn, pm);
> if (err)
> return err;
> }
> - pte_unmap(pte - 1);
>
> cond_resched();
>
Do we need `offset' at all?
You have
static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
void *private)
{
struct pagemapread *pm = private;
pte_t *pte;
int offset = 0, err = 0;
for (; addr != end; offset++, addr += PAGE_SIZE) {
u64 pfn = PM_NOT_PRESENT;
pte = pte_offset_map(pmd, addr);
if (is_swap_pte(pte[offset]))
pfn = swap_pte_to_pagemap_entry(pte[offset]);
else if (pte_present(pte[offset]))
pfn = pte_pfn(pte[offset]);
pte_unmap(pte);
err = add_to_pagemap(addr, pfn, pm);
if (err)
return err;
}
cond_resched();
return err;
}
but I think we just do s/pte[offset]/*pte/. The virtual address should be
the only thing we need to increment as we walk across the addresses here?
^ permalink raw reply
* Re: 2.6.24-rc8-mm1: powerpc oopses
From: Matt Mackall @ 2008-01-18 0:12 UTC (permalink / raw)
To: Andrew Morton; +Cc: linuxppc-dev, m.kozlowski, paulus, linux-kernel
In-Reply-To: <20080117160513.3456b4eb.akpm@linux-foundation.org>
On Thu, 2008-01-17 at 16:05 -0800, Andrew Morton wrote:
> On Thu, 17 Jan 2008 17:39:54 -0600
> Matt Mackall <mpm@selenic.com> wrote:
>
> >
> > On Thu, 2008-01-17 at 14:51 -0800, Andrew Morton wrote:
> > > > proc_loop: /proc/3731/task/3731/pagemap
> > > > kernel: BUG: sleeping function called from invalid context at fs/proc/task_mmu.c:554
> > > > kernel: in_atomic():1, irqs_disabled():0
> > > > kernel: Call Trace:
> > > > kernel: [cf1cddf0] [c000840c] show_stack+0x3c/0x194 (unreliable)
> > > > kernel: [cf1cde20] [c002b2ec] __might_sleep+0xf4/0x108
> > > > kernel: [cf1cde30] [c00d2d54] add_to_pagemap+0x40/0x11c
> > > > kernel: [cf1cde50] [c00d2f44] pagemap_pte_range+0xa8/0x10c
> > > > kernel: [cf1cde70] [c0081b30] walk_page_range+0x148/0x23c
> > > > kernel: [cf1cdeb0] [c00d3104] pagemap_read+0x15c/0x244
> > > > kernel: [cf1cdef0] [c0092144] vfs_read+0xc4/0x16c
> > > > kernel: [cf1cdf10] [c009261c] sys_read+0x4c/0x90
> > > > kernel: [cf1cdf40] [c001328c] ret_from_syscall+0x0/0x40
> > >
> > > It's not really an oops - it's a warning. add_to_pagemap() is doing a
> > > put_user() inside pagemap_pte_range->pte_offset_map->kmap_atomic.
> > >
> > > A known bug, I'm afraid.
> > >
> > > How to fix?
> > >
> > > - double-buffer the data to be copied to userspace or
> > >
> > > - take a local copy of the pte page then work on that instead or
> > >
> > > - play copy_to_user_inatomic() tricks.
> >
> > Hmm, this fell off my radar. How about something like this as a minimal
> > fix (untested as -mm is a complete doorstop for me at the moment)?
> >
> > diff -r 5595adaea70f fs/proc/task_mmu.c
> > --- a/fs/proc/task_mmu.c Thu Jan 17 13:26:54 2008 -0600
> > +++ b/fs/proc/task_mmu.c Thu Jan 17 17:29:21 2008 -0600
> > @@ -582,20 +583,26 @@
> > {
> > struct pagemapread *pm = private;
> > pte_t *pte;
> > - int err = 0;
> > + int offset = 0, err = 0;
> >
> > pte = pte_offset_map(pmd, addr);
> > - for (; addr != end; pte++, addr += PAGE_SIZE) {
> > + for (; addr != end; offset++, addr += PAGE_SIZE) {
> > u64 pfn = PM_NOT_PRESENT;
> > - if (is_swap_pte(*pte))
> > - pfn = swap_pte_to_pagemap_entry(*pte);
> > - else if (pte_present(*pte))
> > - pfn = pte_pfn(*pte);
> > + if (is_swap_pte(pte[offset]))
> > + pfn = swap_pte_to_pagemap_entry(pte[offset]);
> > + else if (pte_present(pte[offset]))
> > + pfn = pte_pfn(pte[offset]);
> > +#ifdef CONFIG_HIGHPTE
> > + pte_unmap(pte);
> > err = add_to_pagemap(addr, pfn, pm);
> > + pte = pte_offset_map(pmd, addr);
> > +#else
> > + err = add_to_pagemap(addr, pfn, pm);
> > +#endif
> > if (err)
> > return err;
> > }
> > - pte_unmap(pte - 1);
> > + pte_unmap(pte);
> >
> > cond_resched();
> >
>
> Good point, it really can be taht simple.
>
> Do we need the ifdef? pte_offset_map/pte_unmap should be super-cheap on
> !CONFIG_HIGHPTE builds.
In that case, pte_unmap is free, pte_offset_map is just a bit of math.
So yeah, we can simplify this. How about:
diff -r 5595adaea70f fs/proc/task_mmu.c
--- a/fs/proc/task_mmu.c Thu Jan 17 13:26:54 2008 -0600
+++ b/fs/proc/task_mmu.c Thu Jan 17 18:11:13 2008 -0600
@@ -582,20 +583,20 @@
{
struct pagemapread *pm = private;
pte_t *pte;
- int err = 0;
+ int offset = 0, err = 0;
- pte = pte_offset_map(pmd, addr);
- for (; addr != end; pte++, addr += PAGE_SIZE) {
+ for (; addr != end; offset++, addr += PAGE_SIZE) {
u64 pfn = PM_NOT_PRESENT;
- if (is_swap_pte(*pte))
- pfn = swap_pte_to_pagemap_entry(*pte);
- else if (pte_present(*pte))
- pfn = pte_pfn(*pte);
+ pte = pte_offset_map(pmd, addr);
+ if (is_swap_pte(pte[offset]))
+ pfn = swap_pte_to_pagemap_entry(pte[offset]);
+ else if (pte_present(pte[offset]))
+ pfn = pte_pfn(pte[offset]);
+ pte_unmap(pte);
err = add_to_pagemap(addr, pfn, pm);
if (err)
return err;
}
- pte_unmap(pte - 1);
cond_resched();
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply
* [Add mpc5121 support PATCH v3 5/8] Separate MPC52xx PSC FIFO registers from rest of PSC
From: John Rigby @ 2008-01-18 0:05 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1200614738-25654-5-git-send-email-jrigby@freescale.com>
This is in preparation for the addition of MPC512x
PSC support. The main difference in the 512x is
in the fifo registers.
Signed-off-by: John Rigby <jrigby@freescale.com>
---
drivers/serial/mpc52xx_uart.c | 10 ++++++----
include/asm-powerpc/mpc52xx_psc.h | 3 +++
include/asm-ppc/mpc52xx_psc.h | 3 +++
3 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index ec36ad7..25a91c9 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -111,6 +111,7 @@ static void mpc52xx_uart_of_enumerate(void);
#endif
#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
+#define FIFO(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
/* Forward declaration of the interruption handling routine */
@@ -222,6 +223,7 @@ static int
mpc52xx_uart_startup(struct uart_port *port)
{
struct mpc52xx_psc __iomem *psc = PSC(port);
+ struct mpc52xx_psc_fifo __iomem *fifo = FIFO(port);
int ret;
/* Request IRQ */
@@ -238,10 +240,10 @@ mpc52xx_uart_startup(struct uart_port *port)
out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); /* /16 prescaler on */
- out_8(&psc->rfcntl, 0x00);
- out_be16(&psc->rfalarm, 0x1ff);
- out_8(&psc->tfcntl, 0x07);
- out_be16(&psc->tfalarm, 0x80);
+ out_8(&fifo->rfcntl, 0x00);
+ out_be16(&fifo->rfalarm, 0x1ff);
+ out_8(&fifo->tfcntl, 0x07);
+ out_be16(&fifo->tfalarm, 0x80);
port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h
index 26690d2..bea42b9 100644
--- a/include/asm-powerpc/mpc52xx_psc.h
+++ b/include/asm-powerpc/mpc52xx_psc.h
@@ -153,6 +153,9 @@ struct mpc52xx_psc {
u8 reserved16[3];
u8 irfdr; /* PSC + 0x54 */
u8 reserved17[3];
+};
+
+struct mpc52xx_psc_fifo {
u16 rfnum; /* PSC + 0x58 */
u16 reserved18;
u16 tfnum; /* PSC + 0x5c */
diff --git a/include/asm-ppc/mpc52xx_psc.h b/include/asm-ppc/mpc52xx_psc.h
index c82b8d4..39fcd02 100644
--- a/include/asm-ppc/mpc52xx_psc.h
+++ b/include/asm-ppc/mpc52xx_psc.h
@@ -159,6 +159,9 @@ struct mpc52xx_psc {
u8 reserved16[3];
u8 irfdr; /* PSC + 0x54 */
u8 reserved17[3];
+};
+
+struct mpc52xx_psc_fifo {
u16 rfnum; /* PSC + 0x58 */
u16 reserved18;
u16 tfnum; /* PSC + 0x5c */
--
1.5.3.5.726.g41a7a
^ permalink raw reply related
* [Add mpc5121 support PATCH v3 6/8] Cleanup checkpatch.pl problems in mpc52xx_uart.c
From: John Rigby @ 2008-01-18 0:05 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1200614738-25654-6-git-send-email-jrigby@freescale.com>
In preparation of adding MPC5121 support
cleanup some things that checkpatch.pl complains
about also some minor fixes suggested by
Stephen Rothwell.
Signed-off-by: John Rigby <jrigby@freescale.com>
---
drivers/serial/mpc52xx_uart.c | 204 ++++++++++++++++++++++-------------------
1 files changed, 109 insertions(+), 95 deletions(-)
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 25a91c9..9bf4521 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -36,7 +36,7 @@
* DCD. However, the pin multiplexing aren't changed and should be set either
* by the bootloader or in the platform init code.
*
- * The idx field must be equal to the PSC index ( e.g. 0 for PSC1, 1 for PSC2,
+ * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2,
* and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
* so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
* fpr the console code : without this 1:1 mapping, at early boot time, when we
@@ -68,11 +68,11 @@
#include <linux/sysrq.h>
#include <linux/console.h>
-#include <asm/delay.h>
-#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/io.h>
#if defined(CONFIG_PPC_MERGE)
-#include <asm/of_platform.h>
+#include <linux/of_platform.h>
#else
#include <linux/platform_device.h>
#endif
@@ -115,19 +115,20 @@ static void mpc52xx_uart_of_enumerate(void);
/* Forward declaration of the interruption handling routine */
-static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id);
+static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id);
/* Simple macro to test if a port is console or not. This one is taken
* for serial_core.c and maybe should be moved to serial_core.h ? */
#ifdef CONFIG_SERIAL_CORE_CONSOLE
-#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line)
+#define uart_console(port) \
+ ((port)->cons && (port)->cons->index == (port)->line)
#else
#define uart_console(port) (0)
#endif
#if defined(CONFIG_PPC_MERGE)
-static struct of_device_id mpc52xx_uart_of_match[] = {
+static const struct of_device_id mpc52xx_uart_of_match[] = {
{ .type = "serial", .compatible = "mpc5200-psc-uart", },
{},
};
@@ -163,7 +164,7 @@ mpc52xx_uart_stop_tx(struct uart_port *port)
{
/* port->lock taken by caller */
port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY;
- out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+ out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
}
static void
@@ -171,7 +172,7 @@ mpc52xx_uart_start_tx(struct uart_port *port)
{
/* port->lock taken by caller */
port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
- out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+ out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
}
static void
@@ -185,7 +186,7 @@ mpc52xx_uart_send_xchar(struct uart_port *port, char ch)
/* Make sure tx interrupts are on */
/* Truly necessary ??? They should be anyway */
port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
- out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+ out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
}
spin_unlock_irqrestore(&port->lock, flags);
@@ -196,7 +197,7 @@ mpc52xx_uart_stop_rx(struct uart_port *port)
{
/* port->lock taken by caller */
port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY;
- out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+ out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
}
static void
@@ -211,10 +212,10 @@ mpc52xx_uart_break_ctl(struct uart_port *port, int ctl)
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
- if ( ctl == -1 )
- out_8(&PSC(port)->command,MPC52xx_PSC_START_BRK);
+ if (ctl == -1)
+ out_8(&PSC(port)->command, MPC52xx_PSC_START_BRK);
else
- out_8(&PSC(port)->command,MPC52xx_PSC_STOP_BRK);
+ out_8(&PSC(port)->command, MPC52xx_PSC_STOP_BRK);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -233,10 +234,10 @@ mpc52xx_uart_startup(struct uart_port *port)
return ret;
/* Reset/activate the port, clear and enable interrupts */
- out_8(&psc->command,MPC52xx_PSC_RST_RX);
- out_8(&psc->command,MPC52xx_PSC_RST_TX);
+ out_8(&psc->command, MPC52xx_PSC_RST_RX);
+ out_8(&psc->command, MPC52xx_PSC_RST_TX);
- out_be32(&psc->sicr,0); /* UART mode DCD ignored */
+ out_be32(&psc->sicr, 0); /* UART mode DCD ignored */
out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); /* /16 prescaler on */
@@ -246,10 +247,10 @@ mpc52xx_uart_startup(struct uart_port *port)
out_be16(&fifo->tfalarm, 0x80);
port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
- out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
+ out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
- out_8(&psc->command,MPC52xx_PSC_TX_ENABLE);
- out_8(&psc->command,MPC52xx_PSC_RX_ENABLE);
+ out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
+ out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
return 0;
}
@@ -260,12 +261,12 @@ mpc52xx_uart_shutdown(struct uart_port *port)
struct mpc52xx_psc __iomem *psc = PSC(port);
/* Shut down the port. Leave TX active if on a console port */
- out_8(&psc->command,MPC52xx_PSC_RST_RX);
+ out_8(&psc->command, MPC52xx_PSC_RST_RX);
if (!uart_console(port))
- out_8(&psc->command,MPC52xx_PSC_RST_TX);
+ out_8(&psc->command, MPC52xx_PSC_RST_TX);
port->read_status_mask = 0;
- out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
+ out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
/* Release interrupt */
free_irq(port->irq, port);
@@ -273,7 +274,7 @@ mpc52xx_uart_shutdown(struct uart_port *port)
static void
mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
- struct ktermios *old)
+ struct ktermios *old)
{
struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned long flags;
@@ -285,14 +286,14 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
mr1 = 0;
switch (new->c_cflag & CSIZE) {
- case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS;
- break;
- case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS;
- break;
- case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS;
- break;
- case CS8:
- default: mr1 |= MPC52xx_PSC_MODE_8_BITS;
+ case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS;
+ break;
+ case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS;
+ break;
+ case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS;
+ break;
+ case CS8:
+ default: mr1 |= MPC52xx_PSC_MODE_8_BITS;
}
if (new->c_cflag & PARENB) {
@@ -334,24 +335,24 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
udelay(1);
if (!j)
- printk( KERN_ERR "mpc52xx_uart.c: "
+ printk(KERN_ERR "mpc52xx_uart.c: "
"Unable to flush RX & TX fifos in-time in set_termios."
- "Some chars may have been lost.\n" );
+ "Some chars may have been lost.\n");
/* Reset the TX & RX */
- out_8(&psc->command,MPC52xx_PSC_RST_RX);
- out_8(&psc->command,MPC52xx_PSC_RST_TX);
+ out_8(&psc->command, MPC52xx_PSC_RST_RX);
+ out_8(&psc->command, MPC52xx_PSC_RST_TX);
/* Send new mode settings */
- out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1);
- out_8(&psc->mode,mr1);
- out_8(&psc->mode,mr2);
- out_8(&psc->ctur,ctr >> 8);
- out_8(&psc->ctlr,ctr & 0xff);
+ out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
+ out_8(&psc->mode, mr1);
+ out_8(&psc->mode, mr2);
+ out_8(&psc->ctur, ctr >> 8);
+ out_8(&psc->ctlr, ctr & 0xff);
/* Reenable TX & RX */
- out_8(&psc->command,MPC52xx_PSC_TX_ENABLE);
- out_8(&psc->command,MPC52xx_PSC_RX_ENABLE);
+ out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
+ out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
/* We're all set, release the lock */
spin_unlock_irqrestore(&port->lock, flags);
@@ -366,7 +367,8 @@ mpc52xx_uart_type(struct uart_port *port)
static void
mpc52xx_uart_release_port(struct uart_port *port)
{
- if (port->flags & UPF_IOREMAP) { /* remapped by us ? */
+ /* remapped by us ? */
+ if (port->flags & UPF_IOREMAP) {
iounmap(port->membase);
port->membase = NULL;
}
@@ -381,7 +383,7 @@ mpc52xx_uart_request_port(struct uart_port *port)
if (port->flags & UPF_IOREMAP) /* Need to remap ? */
port->membase = ioremap(port->mapbase,
- sizeof(struct mpc52xx_psc));
+ sizeof(struct mpc52xx_psc));
if (!port->membase)
return -EINVAL;
@@ -400,22 +402,22 @@ mpc52xx_uart_request_port(struct uart_port *port)
static void
mpc52xx_uart_config_port(struct uart_port *port, int flags)
{
- if ( (flags & UART_CONFIG_TYPE) &&
- (mpc52xx_uart_request_port(port) == 0) )
- port->type = PORT_MPC52xx;
+ if ((flags & UART_CONFIG_TYPE)
+ && (mpc52xx_uart_request_port(port) == 0))
+ port->type = PORT_MPC52xx;
}
static int
mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
{
- if ( ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx )
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx)
return -EINVAL;
- if ( (ser->irq != port->irq) ||
- (ser->io_type != SERIAL_IO_MEM) ||
- (ser->baud_base != port->uartclk) ||
- (ser->iomem_base != (void*)port->mapbase) ||
- (ser->hub6 != 0 ) )
+ if ((ser->irq != port->irq) ||
+ (ser->io_type != SERIAL_IO_MEM) ||
+ (ser->baud_base != port->uartclk) ||
+ (ser->iomem_base != (void *)port->mapbase) ||
+ (ser->hub6 != 0))
return -EINVAL;
return 0;
@@ -457,8 +459,8 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
unsigned short status;
/* While we can read, do so ! */
- while ( (status = in_be16(&PSC(port)->mpc52xx_psc_status)) &
- MPC52xx_PSC_SR_RXRDY) {
+ while ((status = in_be16(&PSC(port)->mpc52xx_psc_status)) &
+ MPC52xx_PSC_SR_RXRDY) {
/* Get the char */
ch = in_8(&PSC(port)->mpc52xx_psc_buffer_8);
@@ -476,9 +478,9 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
flag = TTY_NORMAL;
port->icount.rx++;
- if ( status & (MPC52xx_PSC_SR_PE |
- MPC52xx_PSC_SR_FE |
- MPC52xx_PSC_SR_RB) ) {
+ if (status & (MPC52xx_PSC_SR_PE |
+ MPC52xx_PSC_SR_FE |
+ MPC52xx_PSC_SR_RB)) {
if (status & MPC52xx_PSC_SR_RB) {
flag = TTY_BREAK;
@@ -489,7 +491,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
flag = TTY_FRAME;
/* Clear error condition */
- out_8(&PSC(port)->command,MPC52xx_PSC_RST_ERR_STAT);
+ out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT);
}
tty_insert_flip_char(tty, ch, flag);
@@ -570,16 +572,16 @@ mpc52xx_uart_int(int irq, void *dev_id)
/* Do we need to receive chars ? */
/* For this RX interrupts must be on and some chars waiting */
- if ( status & MPC52xx_PSC_IMR_RXRDY )
+ if (status & MPC52xx_PSC_IMR_RXRDY)
keepgoing |= mpc52xx_uart_int_rx_chars(port);
/* Do we need to send chars ? */
/* For this, TX must be ready and TX interrupt enabled */
- if ( status & MPC52xx_PSC_IMR_TXRDY )
+ if (status & MPC52xx_PSC_IMR_TXRDY)
keepgoing |= mpc52xx_uart_int_tx_chars(port);
/* Limit number of iteration */
- if ( !(--pass) )
+ if (!(--pass))
keepgoing = 0;
} while (keepgoing);
@@ -598,7 +600,7 @@ mpc52xx_uart_int(int irq, void *dev_id)
static void __init
mpc52xx_console_get_options(struct uart_port *port,
- int *baud, int *parity, int *bits, int *flow)
+ int *baud, int *parity, int *bits, int *flow)
{
struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned char mr1;
@@ -606,7 +608,7 @@ mpc52xx_console_get_options(struct uart_port *port,
pr_debug("mpc52xx_console_get_options(port=%p)\n", port);
/* Read the mode registers */
- out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1);
+ out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
mr1 = in_8(&psc->mode);
/* CT{U,L}R are write-only ! */
@@ -618,11 +620,18 @@ mpc52xx_console_get_options(struct uart_port *port,
/* Parse them */
switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
- case MPC52xx_PSC_MODE_5_BITS: *bits = 5; break;
- case MPC52xx_PSC_MODE_6_BITS: *bits = 6; break;
- case MPC52xx_PSC_MODE_7_BITS: *bits = 7; break;
- case MPC52xx_PSC_MODE_8_BITS:
- default: *bits = 8;
+ case MPC52xx_PSC_MODE_5_BITS:
+ *bits = 5;
+ break;
+ case MPC52xx_PSC_MODE_6_BITS:
+ *bits = 6;
+ break;
+ case MPC52xx_PSC_MODE_7_BITS:
+ *bits = 7;
+ break;
+ case MPC52xx_PSC_MODE_8_BITS:
+ default:
+ *bits = 8;
}
if (mr1 & MPC52xx_PSC_MODE_PARNONE)
@@ -659,7 +668,7 @@ mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
/* Wait the TX buffer to be empty */
j = 20000; /* Maximum wait */
while (!(in_be16(&psc->mpc52xx_psc_status) &
- MPC52xx_PSC_SR_TXEMP) && --j)
+ MPC52xx_PSC_SR_TXEMP) && --j)
udelay(1);
}
@@ -732,16 +741,18 @@ mpc52xx_console_setup(struct console *co, char *options)
}
pr_debug("Console on ttyPSC%x is %s\n",
- co->index, mpc52xx_uart_nodes[co->index]->full_name);
+ co->index, mpc52xx_uart_nodes[co->index]->full_name);
/* Fetch register locations */
- if ((ret = of_address_to_resource(np, 0, &res)) != 0) {
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret) {
pr_debug("Could not get resources for PSC%x\n", co->index);
return ret;
}
/* Search for bus-frequency property in this node or a parent */
- if ((ipb_freq = mpc52xx_find_ipb_freq(np)) == 0) {
+ ipb_freq = mpc52xx_find_ipb_freq(np);
+ if (ipb_freq == 0) {
pr_debug("Could not find IPB bus frequency!\n");
return -EINVAL;
}
@@ -759,7 +770,8 @@ mpc52xx_console_setup(struct console *co, char *options)
return -EINVAL;
pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n",
- (void*)port->mapbase, port->membase, port->irq, port->uartclk);
+ (void *)port->mapbase, port->membase,
+ port->irq, port->uartclk);
/* Setup the port parameters accoding to options */
if (options)
@@ -768,7 +780,7 @@ mpc52xx_console_setup(struct console *co, char *options)
mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
pr_debug("Setting console parameters: %i %i%c1 flow=%c\n",
- baud, bits, parity, flow);
+ baud, bits, parity, flow);
return uart_set_options(port, co, baud, parity, bits, flow);
}
@@ -783,7 +795,7 @@ static struct console mpc52xx_console = {
.device = uart_console_device,
.setup = mpc52xx_console_setup,
.flags = CON_PRINTBUFFER,
- .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0 ) */
+ .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0) */
.data = &mpc52xx_uart_driver,
};
@@ -811,7 +823,6 @@ console_initcall(mpc52xx_console_init);
/* ======================================================================== */
static struct uart_driver mpc52xx_uart_driver = {
- .owner = THIS_MODULE,
.driver_name = "mpc52xx_psc_uart",
.dev_name = "ttyPSC",
.major = SERIAL_PSC_MAJOR,
@@ -839,7 +850,7 @@ mpc52xx_uart_probe(struct platform_device *dev)
if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
return -EINVAL;
- if (!mpc52xx_match_psc_function(idx,"uart"))
+ if (!mpc52xx_match_psc_function(idx, "uart"))
return -ENODEV;
/* Init the port structure */
@@ -850,13 +861,13 @@ mpc52xx_uart_probe(struct platform_device *dev)
port->fifosize = 512;
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF |
- ( uart_console(port) ? 0 : UPF_IOREMAP );
+ (uart_console(port) ? 0 : UPF_IOREMAP);
port->line = idx;
port->ops = &mpc52xx_uart_ops;
port->dev = &dev->dev;
/* Search for IRQ and mapbase */
- for (i=0 ; i<dev->num_resources ; i++, res++) {
+ for (i = 0 ; i < dev->num_resources ; i++, res++) {
if (res->flags & IORESOURCE_MEM)
port->mapbase = res->start;
else if (res->flags & IORESOURCE_IRQ)
@@ -868,7 +879,7 @@ mpc52xx_uart_probe(struct platform_device *dev)
/* Add the port to the uart sub-system */
ret = uart_add_one_port(&mpc52xx_uart_driver, port);
if (!ret)
- platform_set_drvdata(dev, (void*)port);
+ platform_set_drvdata(dev, (void *)port);
return ret;
}
@@ -919,6 +930,7 @@ static struct platform_driver mpc52xx_uart_platform_driver = {
.resume = mpc52xx_uart_resume,
#endif
.driver = {
+ .owner = THIS_MODULE,
.name = "mpc52xx-psc",
},
};
@@ -948,10 +960,11 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
if (idx >= MPC52xx_PSC_MAXNUM)
return -EINVAL;
pr_debug("Found %s assigned to ttyPSC%x\n",
- mpc52xx_uart_nodes[idx]->full_name, idx);
+ mpc52xx_uart_nodes[idx]->full_name, idx);
/* Search for bus-frequency property in this node or a parent */
- if ((ipb_freq = mpc52xx_find_ipb_freq(op->node)) == 0) {
+ ipb_freq = mpc52xx_find_ipb_freq(op->node);
+ if (ipb_freq == 0) {
dev_dbg(&op->dev, "Could not find IPB bus frequency!\n");
return -EINVAL;
}
@@ -964,22 +977,23 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
port->fifosize = 512;
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF |
- ( uart_console(port) ? 0 : UPF_IOREMAP );
+ (uart_console(port) ? 0 : UPF_IOREMAP);
port->line = idx;
port->ops = &mpc52xx_uart_ops;
port->dev = &op->dev;
/* Search for IRQ and mapbase */
- if ((ret = of_address_to_resource(op->node, 0, &res)) != 0)
+ ret = of_address_to_resource(op->node, 0, &res);
+ if (ret)
return ret;
port->mapbase = res.start;
port->irq = irq_of_parse_and_map(op->node, 0);
dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n",
- (void*)port->mapbase, port->irq, port->uartclk);
+ (void *)port->mapbase, port->irq, port->uartclk);
- if ((port->irq==NO_IRQ) || !port->mapbase) {
+ if ((port->irq == NO_IRQ) || !port->mapbase) {
printk(KERN_ERR "Could not allocate resources for PSC\n");
return -EINVAL;
}
@@ -987,7 +1001,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
/* Add the port to the uart sub-system */
ret = uart_add_one_port(&mpc52xx_uart_driver, port);
if (!ret)
- dev_set_drvdata(&op->dev, (void*)port);
+ dev_set_drvdata(&op->dev, (void *)port);
return ret;
}
@@ -1050,6 +1064,7 @@ mpc52xx_uart_of_assign(struct device_node *np, int idx)
if (idx < 0)
return; /* No free slot; abort */
+ of_node_get(np);
/* If the slot is already occupied, then swap slots */
if (mpc52xx_uart_nodes[idx] && (free_idx != -1))
mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx];
@@ -1059,7 +1074,7 @@ mpc52xx_uart_of_assign(struct device_node *np, int idx)
static void
mpc52xx_uart_of_enumerate(void)
{
- static int enum_done = 0;
+ static int enum_done;
struct device_node *np;
const unsigned int *devno;
int i;
@@ -1073,7 +1088,7 @@ mpc52xx_uart_of_enumerate(void)
/* Is a particular device number requested? */
devno = of_get_property(np, "port-number", NULL);
- mpc52xx_uart_of_assign(of_node_get(np), devno ? *devno : -1);
+ mpc52xx_uart_of_assign(np, devno ? *devno : -1);
}
enum_done = 1;
@@ -1081,15 +1096,13 @@ mpc52xx_uart_of_enumerate(void)
for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
if (mpc52xx_uart_nodes[i])
pr_debug("%s assigned to ttyPSC%x\n",
- mpc52xx_uart_nodes[i]->full_name, i);
+ mpc52xx_uart_nodes[i]->full_name, i);
}
}
MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match);
static struct of_platform_driver mpc52xx_uart_of_driver = {
- .owner = THIS_MODULE,
- .name = "mpc52xx-psc-uart",
.match_table = mpc52xx_uart_of_match,
.probe = mpc52xx_uart_of_probe,
.remove = mpc52xx_uart_of_remove,
@@ -1115,7 +1128,8 @@ mpc52xx_uart_init(void)
printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n");
- if ((ret = uart_register_driver(&mpc52xx_uart_driver)) != 0) {
+ ret = uart_register_driver(&mpc52xx_uart_driver);
+ if (ret) {
printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
__FILE__, ret);
return ret;
--
1.5.3.5.726.g41a7a
^ permalink raw reply related
* [Add mpc5121 support PATCH v3 8/8] Add MPC512x support to MPC52xx psc driver
From: John Rigby @ 2008-01-18 0:05 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1200614738-25654-8-git-send-email-jrigby@freescale.com>
Add 512x support using the psc_ops framework established
with the previous patch.
All 512x PSCs share the same interrupt so add
IRQF_SHARED to irq flags.
Signed-off-by: John Rigby <jrigby@freescale.com>
---
drivers/serial/Kconfig | 12 ++--
drivers/serial/mpc52xx_uart.c | 177 +++++++++++++++++++++++++++++++++++--
include/asm-powerpc/mpc52xx_psc.h | 48 ++++++++++
3 files changed, 222 insertions(+), 15 deletions(-)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index d7e1996..c7a4ba9 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1114,17 +1114,17 @@ config SERIAL_SGI_L1_CONSOLE
say Y. Otherwise, say N.
config SERIAL_MPC52xx
- tristate "Freescale MPC52xx family PSC serial support"
- depends on PPC_MPC52xx
+ tristate "Freescale MPC52xx/MPC512x family PSC serial support"
+ depends on PPC_MPC52xx || PPC_MPC512x
select SERIAL_CORE
help
- This drivers support the MPC52xx PSC serial ports. If you would
- like to use them, you must answer Y or M to this option. Not that
+ This driver supports MPC52xx and MPC512x PSC serial ports. If you would
+ like to use them, you must answer Y or M to this option. Note that
for use as console, it must be included in kernel and not as a
module.
config SERIAL_MPC52xx_CONSOLE
- bool "Console on a Freescale MPC52xx family PSC serial port"
+ bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
depends on SERIAL_MPC52xx=y
select SERIAL_CORE_CONSOLE
help
@@ -1132,7 +1132,7 @@ config SERIAL_MPC52xx_CONSOLE
of the Freescale MPC52xx family as a console.
config SERIAL_MPC52xx_CONSOLE_BAUD
- int "Freescale MPC52xx family PSC serial port baud"
+ int "Freescale MPC52xx/MPC512x family PSC serial port baud"
depends on SERIAL_MPC52xx_CONSOLE=y
default "9600"
help
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 0f6036b..fd1afcc 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -16,6 +16,9 @@
* Some of the code has been inspired/copied from the 2.4 code written
* by Dale Farnsworth <dfarnsworth@mvista.com>.
*
+ * Copyright (C) 2008 Freescale Semiconductor Inc.
+ * John Rigby <jrigby@gmail.com>
+ * Added support for MPC5121
* Copyright (C) 2006 Secret Lab Technologies Ltd.
* Grant Likely <grant.likely@secretlab.ca>
* Copyright (C) 2004-2006 Sylvain Munaut <tnt@246tNt.com>
@@ -77,6 +80,7 @@
#endif
#include <asm/mpc52xx.h>
+#include <asm/mpc512x.h>
#include <asm/mpc52xx_psc.h>
#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -126,12 +130,6 @@ static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id);
#define uart_console(port) (0)
#endif
-#if defined(CONFIG_PPC_MERGE)
-static const struct of_device_id mpc52xx_uart_of_match[] = {
- { .type = "serial", .compatible = "mpc5200-psc-uart", },
- {},
-};
-#endif
/* ======================================================================== */
/* PSC fifo operations for isolating differences between 52xx and 512x */
@@ -156,6 +154,7 @@ struct psc_ops {
unsigned long (*getuartclk)(void *p);
};
+#ifdef CONFIG_PPC_MPC52xx
#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
static void mpc52xx_psc_fifo_init(struct uart_port *port)
{
@@ -288,7 +287,161 @@ static struct psc_ops mpc52xx_psc_ops = {
.getuartclk = mpc52xx_getuartclk,
};
-static struct psc_ops *psc_ops = &mpc52xx_psc_ops;
+#endif /* CONFIG_MPC52xx */
+
+#ifdef CONFIG_PPC_MPC512x
+#define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1))
+static void mpc512x_psc_fifo_init(struct uart_port *port)
+{
+ out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE);
+ out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
+ out_be32(&FIFO_512x(port)->txalarm, 1);
+ out_be32(&FIFO_512x(port)->tximr, 0);
+
+ out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE);
+ out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE);
+ out_be32(&FIFO_512x(port)->rxalarm, 1);
+ out_be32(&FIFO_512x(port)->rximr, 0);
+
+ out_be32(&FIFO_512x(port)->tximr, MPC512x_PSC_FIFO_ALARM);
+ out_be32(&FIFO_512x(port)->rximr, MPC512x_PSC_FIFO_ALARM);
+}
+
+static int mpc512x_psc_raw_rx_rdy(struct uart_port *port)
+{
+ return !(in_be32(&FIFO_512x(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY);
+}
+
+static int mpc512x_psc_raw_tx_rdy(struct uart_port *port)
+{
+ return !(in_be32(&FIFO_512x(port)->txsr) & MPC512x_PSC_FIFO_FULL);
+}
+
+static int mpc512x_psc_rx_rdy(struct uart_port *port)
+{
+ return in_be32(&FIFO_512x(port)->rxsr)
+ & in_be32(&FIFO_512x(port)->rximr)
+ & MPC512x_PSC_FIFO_ALARM;
+}
+
+static int mpc512x_psc_tx_rdy(struct uart_port *port)
+{
+ return in_be32(&FIFO_512x(port)->txsr)
+ & in_be32(&FIFO_512x(port)->tximr)
+ & MPC512x_PSC_FIFO_ALARM;
+}
+
+static int mpc512x_psc_tx_empty(struct uart_port *port)
+{
+ return in_be32(&FIFO_512x(port)->txsr)
+ & MPC512x_PSC_FIFO_EMPTY;
+}
+
+static void mpc512x_psc_stop_rx(struct uart_port *port)
+{
+ unsigned long rx_fifo_imr;
+
+ rx_fifo_imr = in_be32(&FIFO_512x(port)->rximr);
+ rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
+ out_be32(&FIFO_512x(port)->rximr, rx_fifo_imr);
+}
+
+static void mpc512x_psc_start_tx(struct uart_port *port)
+{
+ unsigned long tx_fifo_imr;
+
+ tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr);
+ tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM;
+ out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr);
+}
+
+static void mpc512x_psc_stop_tx(struct uart_port *port)
+{
+ unsigned long tx_fifo_imr;
+
+ tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr);
+ tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM;
+ out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr);
+}
+
+static void mpc512x_psc_rx_clr_irq(struct uart_port *port)
+{
+ out_be32(&FIFO_512x(port)->rxisr, in_be32(&FIFO_512x(port)->rxisr));
+}
+
+static void mpc512x_psc_tx_clr_irq(struct uart_port *port)
+{
+ out_be32(&FIFO_512x(port)->txisr, in_be32(&FIFO_512x(port)->txisr));
+}
+
+static void mpc512x_psc_write_char(struct uart_port *port, unsigned char c)
+{
+ out_8(&FIFO_512x(port)->txdata_8, c);
+}
+
+static unsigned char mpc512x_psc_read_char(struct uart_port *port)
+{
+ return in_8(&FIFO_512x(port)->rxdata_8);
+}
+
+static void mpc512x_psc_cw_disable_ints(struct uart_port *port)
+{
+ port->read_status_mask =
+ in_be32(&FIFO_512x(port)->tximr) << 16 |
+ in_be32(&FIFO_512x(port)->rximr);
+ out_be32(&FIFO_512x(port)->tximr, 0);
+ out_be32(&FIFO_512x(port)->rximr, 0);
+}
+
+static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
+{
+ out_be32(&FIFO_512x(port)->tximr,
+ (port->read_status_mask >> 16) & 0x7f);
+ out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f);
+}
+
+static unsigned long mpc512x_getuartclk(void *p)
+{
+ return mpc512x_find_ips_freq(p);
+}
+
+static struct psc_ops mpc512x_psc_ops = {
+ .fifo_init = mpc512x_psc_fifo_init,
+ .raw_rx_rdy = mpc512x_psc_raw_rx_rdy,
+ .raw_tx_rdy = mpc512x_psc_raw_tx_rdy,
+ .rx_rdy = mpc512x_psc_rx_rdy,
+ .tx_rdy = mpc512x_psc_tx_rdy,
+ .tx_empty = mpc512x_psc_tx_empty,
+ .stop_rx = mpc512x_psc_stop_rx,
+ .start_tx = mpc512x_psc_start_tx,
+ .stop_tx = mpc512x_psc_stop_tx,
+ .rx_clr_irq = mpc512x_psc_rx_clr_irq,
+ .tx_clr_irq = mpc512x_psc_tx_clr_irq,
+ .write_char = mpc512x_psc_write_char,
+ .read_char = mpc512x_psc_read_char,
+ .cw_disable_ints = mpc512x_psc_cw_disable_ints,
+ .cw_restore_ints = mpc512x_psc_cw_restore_ints,
+ .getuartclk = mpc512x_getuartclk,
+};
+#endif
+
+static struct psc_ops *psc_ops;
+
+#if defined(CONFIG_PPC_MERGE)
+static const struct of_device_id mpc52xx_uart_of_match[] = {
+#ifdef CONFIG_PPC_MPC52xx
+ {.type = "serial",
+ .compatible = "mpc5200-psc-uart",
+ .data = &mpc52xx_psc_ops},
+#endif
+#ifdef CONFIG_PPC_MPC512x
+ {.type = "serial",
+ .compatible = "fsl,mpc5121-psc-uart",
+ .data = &mpc512x_psc_ops},
+#endif
+ {},
+};
+#endif
/* ======================================================================== */
/* UART operations */
@@ -378,7 +531,8 @@ mpc52xx_uart_startup(struct uart_port *port)
/* Request IRQ */
ret = request_irq(port->irq, mpc52xx_uart_int,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "mpc52xx_psc_uart", port);
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM | IRQF_SHARED,
+ "mpc52xx_psc_uart", port);
if (ret)
return ret;
@@ -1205,15 +1359,19 @@ mpc52xx_uart_of_enumerate(void)
static int enum_done;
struct device_node *np;
const unsigned int *devno;
+ const struct of_device_id *match;
int i;
if (enum_done)
return;
for_each_node_by_type(np, "serial") {
- if (!of_match_node(mpc52xx_uart_of_match, np))
+ match = of_match_node(mpc52xx_uart_of_match, np);
+ if (!match)
continue;
+ psc_ops = match->data;
+
/* Is a particular device number requested? */
devno = of_get_property(np, "port-number", NULL);
mpc52xx_uart_of_assign(np, devno ? *devno : -1);
@@ -1274,6 +1432,7 @@ mpc52xx_uart_init(void)
return ret;
}
#else
+ psc_ops = &mpc52xx_psc_ops;
ret = platform_driver_register(&mpc52xx_uart_platform_driver);
if (ret) {
printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h
index bea42b9..710c5d3 100644
--- a/include/asm-powerpc/mpc52xx_psc.h
+++ b/include/asm-powerpc/mpc52xx_psc.h
@@ -190,5 +190,53 @@ struct mpc52xx_psc_fifo {
u16 tflwfptr; /* PSC + 0x9e */
};
+#define MPC512x_PSC_FIFO_RESET_SLICE 0x80
+#define MPC512x_PSC_FIFO_ENABLE_SLICE 0x01
+#define MPC512x_PSC_FIFO_ENABLE_DMA 0x04
+
+#define MPC512x_PSC_FIFO_EMPTY 0x1
+#define MPC512x_PSC_FIFO_FULL 0x2
+#define MPC512x_PSC_FIFO_ALARM 0x4
+#define MPC512x_PSC_FIFO_URERR 0x8
+#define MPC512x_PSC_FIFO_ORERR 0x01
+#define MPC512x_PSC_FIFO_MEMERROR 0x02
+
+struct mpc512x_psc_fifo {
+ u32 reserved1[10];
+ u32 txcmd; /* PSC + 0x80 */
+ u32 txalarm; /* PSC + 0x84 */
+ u32 txsr; /* PSC + 0x88 */
+ u32 txisr; /* PSC + 0x8c */
+ u32 tximr; /* PSC + 0x90 */
+ u32 txcnt; /* PSC + 0x94 */
+ u32 txptr; /* PSC + 0x98 */
+ u32 txsz; /* PSC + 0x9c */
+ u32 reserved2[7];
+ union {
+ u8 txdata_8;
+ u16 txdata_16;
+ u32 txdata_32;
+ } txdata; /* PSC + 0xbc */
+#define txdata_8 txdata.txdata_8
+#define txdata_16 txdata.txdata_16
+#define txdata_32 txdata.txdata_32
+ u32 rxcmd; /* PSC + 0xc0 */
+ u32 rxalarm; /* PSC + 0xc4 */
+ u32 rxsr; /* PSC + 0xc8 */
+ u32 rxisr; /* PSC + 0xcc */
+ u32 rximr; /* PSC + 0xd0 */
+ u32 rxcnt; /* PSC + 0xd4 */
+ u32 rxptr; /* PSC + 0xd8 */
+ u32 rxsz; /* PSC + 0xdc */
+ u32 reserved3[7];
+ union {
+ u8 rxdata_8;
+ u16 rxdata_16;
+ u32 rxdata_32;
+ } rxdata; /* PSC + 0xfc */
+#define rxdata_8 rxdata.rxdata_8
+#define rxdata_16 rxdata.rxdata_16
+#define rxdata_32 rxdata.rxdata_32
+};
#endif /* __ASM_MPC52xx_PSC_H__ */
--
1.5.3.5.726.g41a7a
^ permalink raw reply related
* [Add mpc5121 support PATCH v3 7/8] Factor out 52xx dependencies from 52xx psc driver
From: John Rigby @ 2008-01-18 0:05 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1200614738-25654-7-git-send-email-jrigby@freescale.com>
PSCs change from 5200 to 5121
this patch localizes the differences in
preparation for adding 5121 support
Signed-off-by: John Rigby <jrigby@freescale.com>
---
drivers/serial/mpc52xx_uart.c | 256 ++++++++++++++++++++++++++++++----------
1 files changed, 192 insertions(+), 64 deletions(-)
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 9bf4521..0f6036b 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -67,7 +67,6 @@
#include <linux/serial.h>
#include <linux/sysrq.h>
#include <linux/console.h>
-
#include <linux/delay.h>
#include <linux/io.h>
@@ -110,8 +109,8 @@ static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM];
static void mpc52xx_uart_of_enumerate(void);
#endif
+
#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
-#define FIFO(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
/* Forward declaration of the interruption handling routine */
@@ -134,6 +133,162 @@ static const struct of_device_id mpc52xx_uart_of_match[] = {
};
#endif
+/* ======================================================================== */
+/* PSC fifo operations for isolating differences between 52xx and 512x */
+/* ======================================================================== */
+
+struct psc_ops {
+ void (*fifo_init)(struct uart_port *port);
+ int (*raw_rx_rdy)(struct uart_port *port);
+ int (*raw_tx_rdy)(struct uart_port *port);
+ int (*rx_rdy)(struct uart_port *port);
+ int (*tx_rdy)(struct uart_port *port);
+ int (*tx_empty)(struct uart_port *port);
+ void (*stop_rx)(struct uart_port *port);
+ void (*start_tx)(struct uart_port *port);
+ void (*stop_tx)(struct uart_port *port);
+ void (*rx_clr_irq)(struct uart_port *port);
+ void (*tx_clr_irq)(struct uart_port *port);
+ void (*write_char)(struct uart_port *port, unsigned char c);
+ unsigned char (*read_char)(struct uart_port *port);
+ void (*cw_disable_ints)(struct uart_port *port);
+ void (*cw_restore_ints)(struct uart_port *port);
+ unsigned long (*getuartclk)(void *p);
+};
+
+#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
+static void mpc52xx_psc_fifo_init(struct uart_port *port)
+{
+ struct mpc52xx_psc __iomem *psc = PSC(port);
+ struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port);
+
+ /* /32 prescaler */
+ out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00);
+
+ out_8(&fifo->rfcntl, 0x00);
+ out_be16(&fifo->rfalarm, 0x1ff);
+ out_8(&fifo->tfcntl, 0x07);
+ out_be16(&fifo->tfalarm, 0x80);
+
+ port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
+ out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port)
+{
+ return in_be16(&PSC(port)->mpc52xx_psc_status)
+ & MPC52xx_PSC_SR_RXRDY;
+}
+
+static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port)
+{
+ return in_be16(&PSC(port)->mpc52xx_psc_status)
+ & MPC52xx_PSC_SR_TXRDY;
+}
+
+
+static int mpc52xx_psc_rx_rdy(struct uart_port *port)
+{
+ return in_be16(&PSC(port)->mpc52xx_psc_status)
+ & port->read_status_mask
+ & MPC52xx_PSC_SR_RXRDY;
+}
+
+static int mpc52xx_psc_tx_rdy(struct uart_port *port)
+{
+ return in_be16(&PSC(port)->mpc52xx_psc_status)
+ & port->read_status_mask
+ & MPC52xx_PSC_SR_TXRDY;
+}
+
+static int mpc52xx_psc_tx_empty(struct uart_port *port)
+{
+ return in_be16(&PSC(port)->mpc52xx_psc_status)
+ & MPC52xx_PSC_SR_TXEMP;
+}
+
+static void mpc52xx_psc_start_tx(struct uart_port *port)
+{
+ port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
+ out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static void mpc52xx_psc_stop_tx(struct uart_port *port)
+{
+ port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY;
+ out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static void mpc52xx_psc_stop_rx(struct uart_port *port)
+{
+ port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY;
+ out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static void mpc52xx_psc_rx_clr_irq(struct uart_port *port)
+{
+}
+
+static void mpc52xx_psc_tx_clr_irq(struct uart_port *port)
+{
+}
+
+static void mpc52xx_psc_write_char(struct uart_port *port, unsigned char c)
+{
+ out_8(&PSC(port)->mpc52xx_psc_buffer_8, c);
+}
+
+static unsigned char mpc52xx_psc_read_char(struct uart_port *port)
+{
+ return in_8(&PSC(port)->mpc52xx_psc_buffer_8);
+}
+
+static void mpc52xx_psc_cw_disable_ints(struct uart_port *port)
+{
+ out_be16(&PSC(port)->mpc52xx_psc_imr, 0);
+}
+
+static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
+{
+ out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+/* Search for bus-frequency property in this node or a parent */
+static unsigned long mpc52xx_getuartclk(void *p)
+{
+#if defined(CONFIG_PPC_MERGE)
+ /*
+ * 5200 UARTs have a / 32 prescaler
+ * but the generic serial code assumes 16
+ * so return ipb freq / 2
+ */
+ return mpc52xx_find_ipb_freq(p) / 2;
+#else
+ pr_debug("unexpected call to mpc52xx_getuartclk with arch/ppc\n");
+ return NULL;
+#endif
+}
+
+static struct psc_ops mpc52xx_psc_ops = {
+ .fifo_init = mpc52xx_psc_fifo_init,
+ .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
+ .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
+ .rx_rdy = mpc52xx_psc_rx_rdy,
+ .tx_rdy = mpc52xx_psc_tx_rdy,
+ .tx_empty = mpc52xx_psc_tx_empty,
+ .stop_rx = mpc52xx_psc_stop_rx,
+ .start_tx = mpc52xx_psc_start_tx,
+ .stop_tx = mpc52xx_psc_stop_tx,
+ .rx_clr_irq = mpc52xx_psc_rx_clr_irq,
+ .tx_clr_irq = mpc52xx_psc_tx_clr_irq,
+ .write_char = mpc52xx_psc_write_char,
+ .read_char = mpc52xx_psc_read_char,
+ .cw_disable_ints = mpc52xx_psc_cw_disable_ints,
+ .cw_restore_ints = mpc52xx_psc_cw_restore_ints,
+ .getuartclk = mpc52xx_getuartclk,
+};
+
+static struct psc_ops *psc_ops = &mpc52xx_psc_ops;
/* ======================================================================== */
/* UART operations */
@@ -142,8 +297,7 @@ static const struct of_device_id mpc52xx_uart_of_match[] = {
static unsigned int
mpc52xx_uart_tx_empty(struct uart_port *port)
{
- int status = in_be16(&PSC(port)->mpc52xx_psc_status);
- return (status & MPC52xx_PSC_SR_TXEMP) ? TIOCSER_TEMT : 0;
+ return psc_ops->tx_empty(port) ? TIOCSER_TEMT : 0;
}
static void
@@ -163,16 +317,14 @@ static void
mpc52xx_uart_stop_tx(struct uart_port *port)
{
/* port->lock taken by caller */
- port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY;
- out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
+ psc_ops->stop_tx(port);
}
static void
mpc52xx_uart_start_tx(struct uart_port *port)
{
/* port->lock taken by caller */
- port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
- out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
+ psc_ops->start_tx(port);
}
static void
@@ -185,8 +337,7 @@ mpc52xx_uart_send_xchar(struct uart_port *port, char ch)
if (ch) {
/* Make sure tx interrupts are on */
/* Truly necessary ??? They should be anyway */
- port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
- out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
+ psc_ops->start_tx(port);
}
spin_unlock_irqrestore(&port->lock, flags);
@@ -196,8 +347,7 @@ static void
mpc52xx_uart_stop_rx(struct uart_port *port)
{
/* port->lock taken by caller */
- port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY;
- out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
+ psc_ops->stop_rx(port);
}
static void
@@ -224,7 +374,6 @@ static int
mpc52xx_uart_startup(struct uart_port *port)
{
struct mpc52xx_psc __iomem *psc = PSC(port);
- struct mpc52xx_psc_fifo __iomem *fifo = FIFO(port);
int ret;
/* Request IRQ */
@@ -239,15 +388,7 @@ mpc52xx_uart_startup(struct uart_port *port)
out_be32(&psc->sicr, 0); /* UART mode DCD ignored */
- out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); /* /16 prescaler on */
-
- out_8(&fifo->rfcntl, 0x00);
- out_be16(&fifo->rfalarm, 0x1ff);
- out_8(&fifo->tfcntl, 0x07);
- out_be16(&fifo->tfalarm, 0x80);
-
- port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
- out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+ psc_ops->fifo_init(port);
out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
@@ -330,8 +471,7 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
* boot for the console, all stuff is not yet ready to receive at that
* time and that just makes the kernel oops */
/* while (j-- && mpc52xx_uart_int_rx_chars(port)); */
- while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) &&
- --j)
+ while (!mpc52xx_uart_tx_empty(port) && --j)
udelay(1);
if (!j)
@@ -459,11 +599,9 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
unsigned short status;
/* While we can read, do so ! */
- while ((status = in_be16(&PSC(port)->mpc52xx_psc_status)) &
- MPC52xx_PSC_SR_RXRDY) {
-
+ while (psc_ops->raw_rx_rdy(port)) {
/* Get the char */
- ch = in_8(&PSC(port)->mpc52xx_psc_buffer_8);
+ ch = psc_ops->read_char(port);
/* Handle sysreq char */
#ifdef SUPPORT_SYSRQ
@@ -478,6 +616,8 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
flag = TTY_NORMAL;
port->icount.rx++;
+ status = in_be16(&PSC(port)->mpc52xx_psc_status);
+
if (status & (MPC52xx_PSC_SR_PE |
MPC52xx_PSC_SR_FE |
MPC52xx_PSC_SR_RB)) {
@@ -507,7 +647,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
tty_flip_buffer_push(tty);
- return in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY;
+ return psc_ops->raw_rx_rdy(port);
}
static inline int
@@ -517,7 +657,7 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port)
/* Process out of band chars */
if (port->x_char) {
- out_8(&PSC(port)->mpc52xx_psc_buffer_8, port->x_char);
+ psc_ops->write_char(port, port->x_char);
port->icount.tx++;
port->x_char = 0;
return 1;
@@ -530,8 +670,8 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port)
}
/* Send chars */
- while (in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXRDY) {
- out_8(&PSC(port)->mpc52xx_psc_buffer_8, xmit->buf[xmit->tail]);
+ while (psc_ops->raw_tx_rdy(port)) {
+ psc_ops->write_char(port, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
if (uart_circ_empty(xmit))
@@ -557,7 +697,6 @@ mpc52xx_uart_int(int irq, void *dev_id)
struct uart_port *port = dev_id;
unsigned long pass = ISR_PASS_LIMIT;
unsigned int keepgoing;
- unsigned short status;
spin_lock(&port->lock);
@@ -566,18 +705,12 @@ mpc52xx_uart_int(int irq, void *dev_id)
/* If we don't find anything to do, we stop */
keepgoing = 0;
- /* Read status */
- status = in_be16(&PSC(port)->mpc52xx_psc_isr);
- status &= port->read_status_mask;
-
- /* Do we need to receive chars ? */
- /* For this RX interrupts must be on and some chars waiting */
- if (status & MPC52xx_PSC_IMR_RXRDY)
+ psc_ops->rx_clr_irq(port);
+ if (psc_ops->rx_rdy(port))
keepgoing |= mpc52xx_uart_int_rx_chars(port);
- /* Do we need to send chars ? */
- /* For this, TX must be ready and TX interrupt enabled */
- if (status & MPC52xx_PSC_IMR_TXRDY)
+ psc_ops->tx_clr_irq(port);
+ if (psc_ops->tx_rdy(port))
keepgoing |= mpc52xx_uart_int_tx_chars(port);
/* Limit number of iteration */
@@ -644,36 +777,33 @@ static void
mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_port *port = &mpc52xx_uart_ports[co->index];
- struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned int i, j;
/* Disable interrupts */
- out_be16(&psc->mpc52xx_psc_imr, 0);
+ psc_ops->cw_disable_ints(port);
/* Wait the TX buffer to be empty */
j = 5000000; /* Maximum wait */
- while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) &&
- --j)
+ while (!mpc52xx_uart_tx_empty(port) && --j)
udelay(1);
/* Write all the chars */
for (i = 0; i < count; i++, s++) {
/* Line return handling */
if (*s == '\n')
- out_8(&psc->mpc52xx_psc_buffer_8, '\r');
+ psc_ops->write_char(port, '\r');
/* Send the char */
- out_8(&psc->mpc52xx_psc_buffer_8, *s);
+ psc_ops->write_char(port, *s);
/* Wait the TX buffer to be empty */
j = 20000; /* Maximum wait */
- while (!(in_be16(&psc->mpc52xx_psc_status) &
- MPC52xx_PSC_SR_TXEMP) && --j)
+ while (!mpc52xx_uart_tx_empty(port) && --j)
udelay(1);
}
/* Restore interrupt state */
- out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+ psc_ops->cw_restore_ints(port);
}
#if !defined(CONFIG_PPC_MERGE)
@@ -718,7 +848,7 @@ mpc52xx_console_setup(struct console *co, char *options)
{
struct uart_port *port = &mpc52xx_uart_ports[co->index];
struct device_node *np = mpc52xx_uart_nodes[co->index];
- unsigned int ipb_freq;
+ unsigned int uartclk;
struct resource res;
int ret;
@@ -750,17 +880,16 @@ mpc52xx_console_setup(struct console *co, char *options)
return ret;
}
- /* Search for bus-frequency property in this node or a parent */
- ipb_freq = mpc52xx_find_ipb_freq(np);
- if (ipb_freq == 0) {
- pr_debug("Could not find IPB bus frequency!\n");
+ uartclk = psc_ops->getuartclk(np);
+ if (uartclk == 0) {
+ pr_debug("Could not find uart clock frequency!\n");
return -EINVAL;
}
/* Basic port init. Needed since we use some uart_??? func before
* real init for early access */
spin_lock_init(&port->lock);
- port->uartclk = ipb_freq / 2;
+ port->uartclk = uartclk;
port->ops = &mpc52xx_uart_ops;
port->mapbase = res.start;
port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc));
@@ -946,7 +1075,7 @@ static int __devinit
mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
{
int idx = -1;
- unsigned int ipb_freq;
+ unsigned int uartclk;
struct uart_port *port = NULL;
struct resource res;
int ret;
@@ -962,10 +1091,9 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
pr_debug("Found %s assigned to ttyPSC%x\n",
mpc52xx_uart_nodes[idx]->full_name, idx);
- /* Search for bus-frequency property in this node or a parent */
- ipb_freq = mpc52xx_find_ipb_freq(op->node);
- if (ipb_freq == 0) {
- dev_dbg(&op->dev, "Could not find IPB bus frequency!\n");
+ uartclk = psc_ops->getuartclk(op->node);
+ if (uartclk == 0) {
+ dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
return -EINVAL;
}
@@ -973,7 +1101,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
port = &mpc52xx_uart_ports[idx];
spin_lock_init(&port->lock);
- port->uartclk = ipb_freq / 2;
+ port->uartclk = uartclk;
port->fifosize = 512;
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF |
--
1.5.3.5.726.g41a7a
^ permalink raw reply related
* [Add mpc5121 support PATCH v3 3/8] Basic Freescale MPC512x support
From: John Rigby @ 2008-01-18 0:05 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1200614738-25654-3-git-send-email-jrigby@freescale.com>
512x is very similar to 83xx and most
of this is patterned after code from 83xx.
New platform:
changed:
arch/powerpc/Kconfig
arch/powerpc/platforms/Kconfig
arch/powerpc/platforms/Kconfig.cputype
arch/powerpc/platforms/Makefile
new:
arch/powerpc/platforms/512x/*
include/asm-powerpc/mpc512x.h
Signed-off-by: John Rigby <jrigby@freescale.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/powerpc/Kconfig | 2 +-
arch/powerpc/platforms/512x/Kconfig | 20 ++++++
arch/powerpc/platforms/512x/Makefile | 4 +
arch/powerpc/platforms/512x/mpc5121_ads.c | 104 +++++++++++++++++++++++++++++
arch/powerpc/platforms/Kconfig | 1 +
arch/powerpc/platforms/Kconfig.cputype | 6 +-
arch/powerpc/platforms/Makefile | 1 +
include/asm-powerpc/mpc512x.h | 22 ++++++
8 files changed, 156 insertions(+), 4 deletions(-)
create mode 100644 arch/powerpc/platforms/512x/Kconfig
create mode 100644 arch/powerpc/platforms/512x/Makefile
create mode 100644 arch/powerpc/platforms/512x/mpc5121_ads.c
create mode 100644 include/asm-powerpc/mpc512x.h
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 66a3d8c..e4efd0c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -470,7 +470,7 @@ config PCI
bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
|| PPC_PS3
- default y if !40x && !CPM2 && !8xx && !PPC_83xx \
+ default y if !40x && !CPM2 && !8xx && !PPC_MPC512x && !PPC_83xx \
&& !PPC_85xx && !PPC_86xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
default PCI_QSPAN if !4xx && !CPM2 && 8xx
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
new file mode 100644
index 0000000..c6fa49e
--- /dev/null
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -0,0 +1,20 @@
+config PPC_MPC512x
+ bool
+ select FSL_SOC
+ select IPIC
+ default n
+
+config PPC_MPC5121
+ bool
+ select PPC_MPC512x
+ default n
+
+config MPC5121_ADS
+ bool "Freescale MPC5121E ADS"
+ depends on PPC_MULTIPLATFORM && PPC32
+ select DEFAULT_UIMAGE
+ select WANT_DEVICE_TREE
+ select PPC_MPC5121
+ help
+ This option enables support for the MPC5121E ADS board.
+ default n
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
new file mode 100644
index 0000000..232c89f
--- /dev/null
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for the Freescale PowerPC 512x linux kernel.
+#
+obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
new file mode 100644
index 0000000..50bd3a3
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>, Thur Mar 29 2007
+ *
+ * Description:
+ * MPC5121 ADS board setup
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+/**
+ * mpc512x_find_ips_freq - Find the IPS bus frequency for a device
+ * @node: device node
+ *
+ * Returns IPS bus frequency, or 0 if the bus frequency cannot be found.
+ */
+unsigned long
+mpc512x_find_ips_freq(struct device_node *node)
+{
+ struct device_node *np;
+ const unsigned int *p_ips_freq = NULL;
+
+ of_node_get(node);
+ while (node) {
+ p_ips_freq = of_get_property(node, "bus-frequency", NULL);
+ if (p_ips_freq)
+ break;
+
+ np = of_get_parent(node);
+ of_node_put(node);
+ node = np;
+ }
+ if (node)
+ of_node_put(node);
+
+ return p_ips_freq ? *p_ips_freq : 0;
+}
+EXPORT_SYMBOL(mpc512x_find_ips_freq);
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .name = "soc", },
+ { .name = "localbus", },
+ {},
+};
+
+static void __init mpc5121_ads_declare_of_platform_devices(void)
+{
+ /* Find every child of the SOC node and add it to of_platform */
+ if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
+ printk(KERN_ERR __FILE__ ": "
+ "Error while probing of_platform bus\n");
+}
+
+static void __init mpc5121_ads_init_IRQ(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+ of_node_put(np);
+
+ /*
+ * Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc5121_ads_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,mpc5121ads");
+}
+
+define_machine(mpc5121_ads) {
+ .name = "MPC5121 ADS",
+ .probe = mpc5121_ads_probe,
+ .init = mpc5121_ads_declare_of_platform_devices,
+ .init_IRQ = mpc5121_ads_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index ad9b1c0..8dfdf61 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -41,6 +41,7 @@ config CLASSIC32
source "arch/powerpc/platforms/pseries/Kconfig"
source "arch/powerpc/platforms/iseries/Kconfig"
source "arch/powerpc/platforms/chrp/Kconfig"
+source "arch/powerpc/platforms/512x/Kconfig"
source "arch/powerpc/platforms/52xx/Kconfig"
source "arch/powerpc/platforms/powermac/Kconfig"
source "arch/powerpc/platforms/prep/Kconfig"
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index c3ee0b5..fb86300 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -14,7 +14,7 @@ choice
There are five families of 32 bit PowerPC chips supported.
The most common ones are the desktop and server CPUs (601, 603,
604, 740, 750, 74xx) CPUs from Freescale and IBM, with their
- embedded 52xx/82xx/83xx/86xx counterparts.
+ embedded 512x/52xx/82xx/83xx/86xx counterparts.
The other embeeded parts, namely 4xx, 8xx, e200 (55xx) and e500
(85xx) each form a family of their own that is not compatible
with the others.
@@ -22,7 +22,7 @@ choice
If unsure, select 52xx/6xx/7xx/74xx/82xx/83xx/86xx.
config 6xx
- bool "52xx/6xx/7xx/74xx/82xx/83xx/86xx"
+ bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx"
select PPC_FPU
config PPC_85xx
@@ -229,7 +229,7 @@ config NR_CPUS
config NOT_COHERENT_CACHE
bool
- depends on 4xx || 8xx || E200
+ depends on 4xx || 8xx || E200 || PPC_MPC512x
default y
config CHECK_CACHE_COHERENCY
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 6d9079d..a984894 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -11,6 +11,7 @@ endif
obj-$(CONFIG_PPC_CHRP) += chrp/
obj-$(CONFIG_40x) += 40x/
obj-$(CONFIG_44x) += 44x/
+obj-$(CONFIG_PPC_MPC512x) += 512x/
obj-$(CONFIG_PPC_MPC52xx) += 52xx/
obj-$(CONFIG_PPC_8xx) += 8xx/
obj-$(CONFIG_PPC_82xx) += 82xx/
diff --git a/include/asm-powerpc/mpc512x.h b/include/asm-powerpc/mpc512x.h
new file mode 100644
index 0000000..c48a165
--- /dev/null
+++ b/include/asm-powerpc/mpc512x.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>, Friday Apr 13 2007
+ *
+ * Description:
+ * MPC5121 Prototypes and definitions
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_POWERPC_MPC512x_H__
+#define __ASM_POWERPC_MPC512x_H__
+
+extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
+
+#endif /* __ASM_POWERPC_MPC512x_H__ */
+
--
1.5.3.5.726.g41a7a
^ permalink raw reply related
* [Add mpc5121 support PATCH v3 4/8] Device tree for MPC5121 ADS
From: John Rigby @ 2008-01-18 0:05 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1200614738-25654-4-git-send-email-jrigby@freescale.com>
Minimal tree for mpc5121 ads.
port-number property in uart nodes
will go away after the driver learns to use aliases
Signed-off-by: John Rigby <jrigby@freescale.com>
---
arch/powerpc/boot/dts/mpc5121ads.dts | 120 ++++++++++++++++++++++++++++++++++
1 files changed, 120 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/mpc5121ads.dts
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
new file mode 100644
index 0000000..d3f678f
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -0,0 +1,120 @@
+/*
+ * MPC5121E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "mpc5121ads";
+ compatible = "fsl,mpc5121ads";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5121@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <d#49500000>; // 49.5 MHz (csb/4)
+ bus-frequency = <d#198000000>; // 198 MHz csb bus
+ clock-frequency = <d#396000000>;// 396 MHz ppc core
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 10000000>; // 256MB at 0
+ };
+
+ localbus@80000020 {
+ compatible = "fsl,mpc5121ads-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <80000020 40>;
+
+ ranges = <0 0 fc000000 04000000
+ 2 0 82000000 00008000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 4000000>;
+ bank-width = <4>;
+ device-width = <1>;
+ };
+
+ board-control@2,0 {
+ compatible = "fsl,mpc5121ads-cpld";
+ reg = <2 0 8000>;
+ };
+ };
+
+ soc@80000000 {
+ compatible = "fsl,mpc5121-immr";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ ranges = <0 80000000 400000>;
+ reg = <80000000 400000>;
+ bus-frequency = <d#66000000>; // 66 MHz ips bus
+
+
+ // IPIC
+ // interrupts cell = <intr #, sense>
+ // sense values match linux IORESOURCE_IRQ_* defines:
+ // sense == 8: Level, low assertion
+ // sense == 2: Edge, high-to-low change
+ //
+ ipic: interrupt-controller@c00 {
+ compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <c00 100>;
+ };
+
+ // 512x PSCs are not 52xx PSCs compatible
+ // PSC3 serial port A aka ttyPSC0
+ serial@11300 {
+ device_type = "serial";
+ compatible = "fsl,mpc5121-psc-uart";
+ // Logical port assignment needed until driver
+ // learns to use aliases
+ port-number = <0>;
+ cell-index = <3>;
+ reg = <11300 100>;
+ interrupts = <28 8>; // actually the fifo irq
+ interrupt-parent = < &ipic >;
+ };
+
+ // PSC4 serial port B aka ttyPSC1
+ serial@11400 {
+ device_type = "serial";
+ compatible = "fsl,mpc5121-psc-uart";
+ // Logical port assignment needed until driver
+ // learns to use aliases
+ port-number = <1>;
+ cell-index = <4>;
+ reg = <11400 100>;
+ interrupts = <28 8>; // actually the fifo irq
+ interrupt-parent = < &ipic >;
+ };
+
+ pscsfifo@11f00 {
+ compatible = "fsl,mpc5121-psc-fifo";
+ reg = <11f00 100>;
+ interrupts = <28 8>;
+ interrupt-parent = < &ipic >;
+ };
+ };
+};
--
1.5.3.5.726.g41a7a
^ permalink raw reply related
* [Add mpc5121 support PATCH v3 2/8] Add mpc512x ipic support
From: John Rigby @ 2008-01-18 0:05 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1200614738-25654-2-git-send-email-jrigby@freescale.com>
Added ipic_info entries for vectors used by 512x that
were previously unused by 83xx.
Signed-off-by: John Rigby <jrigby@freescale.com>
---
arch/powerpc/sysdev/ipic.c | 62 ++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 62 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 7274750..4c016da 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -48,6 +48,13 @@ static struct ipic_info ipic_info[] = {
.bit = 17,
.prio_mask = 1,
},
+ [3] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_C,
+ .force = IPIC_SIFCR_H,
+ .bit = 18,
+ .prio_mask = 2,
+ },
[4] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_C,
@@ -55,6 +62,34 @@ static struct ipic_info ipic_info[] = {
.bit = 19,
.prio_mask = 3,
},
+ [5] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_C,
+ .force = IPIC_SIFCR_H,
+ .bit = 20,
+ .prio_mask = 4,
+ },
+ [6] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_C,
+ .force = IPIC_SIFCR_H,
+ .bit = 21,
+ .prio_mask = 5,
+ },
+ [7] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_C,
+ .force = IPIC_SIFCR_H,
+ .bit = 22,
+ .prio_mask = 6,
+ },
+ [8] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_C,
+ .force = IPIC_SIFCR_H,
+ .bit = 23,
+ .prio_mask = 7,
+ },
[9] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_D,
@@ -223,6 +258,20 @@ static struct ipic_info ipic_info[] = {
.bit = 7,
.prio_mask = 7,
},
+ [40] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_B,
+ .force = IPIC_SIFCR_H,
+ .bit = 8,
+ .prio_mask = 0,
+ },
+ [41] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_B,
+ .force = IPIC_SIFCR_H,
+ .bit = 9,
+ .prio_mask = 1,
+ },
[42] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_B,
@@ -230,6 +279,13 @@ static struct ipic_info ipic_info[] = {
.bit = 10,
.prio_mask = 2,
},
+ [43] = {
+ .mask = IPIC_SIMSR_H,
+ .prio = IPIC_SIPRR_B,
+ .force = IPIC_SIFCR_H,
+ .bit = 11,
+ .prio_mask = 3,
+ },
[44] = {
.mask = IPIC_SIMSR_H,
.prio = IPIC_SIPRR_B,
@@ -387,6 +443,12 @@ static struct ipic_info ipic_info[] = {
.force = IPIC_SIFCR_L,
.bit = 18,
},
+ [83] = {
+ .mask = IPIC_SIMSR_L,
+ .prio = 0,
+ .force = IPIC_SIFCR_L,
+ .bit = 19,
+ },
[84] = {
.mask = IPIC_SIMSR_L,
.prio = 0,
--
1.5.3.5.726.g41a7a
^ permalink raw reply related
* [Add mpc5121 support PATCH v3 1/8] Add IPIC config option
From: John Rigby @ 2008-01-18 0:05 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <1200614738-25654-1-git-send-email-jrigby@freescale.com>
IPIC is not just for 83xx anymore so make it a separate
config option.
Signed-off-by: John Rigby <jrigby@freescale.com>
---
arch/powerpc/platforms/Kconfig | 5 +++++
arch/powerpc/sysdev/Makefile | 2 +-
2 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index ea22cad..ad9b1c0 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -22,6 +22,7 @@ config PPC_83xx
depends on 6xx
select FSL_SOC
select 83xx
+ select IPIC
select WANT_DEVICE_TREE
config PPC_86xx
@@ -80,6 +81,10 @@ config XICS
bool
default y
+config IPIC
+ bool
+ default n
+
config MPIC
bool
default n
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 9a20ef4..66fe39c 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_AXON_RAM) += axonram.o
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
obj-$(CONFIG_PPC_I8259) += i8259.o
-obj-$(CONFIG_PPC_83xx) += ipic.o
+obj-$(CONFIG_IPIC) += ipic.o
obj-$(CONFIG_4xx) += uic.o
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
ifeq ($(CONFIG_PCI),y)
--
1.5.3.5.726.g41a7a
^ permalink raw reply related
* Re: 2.6.24-rc8-mm1: powerpc oopses
From: Andrew Morton @ 2008-01-18 0:05 UTC (permalink / raw)
To: Matt Mackall; +Cc: linuxppc-dev, m.kozlowski, paulus, linux-kernel
In-Reply-To: <1200613194.3839.22.camel@cinder.waste.org>
On Thu, 17 Jan 2008 17:39:54 -0600
Matt Mackall <mpm@selenic.com> wrote:
>
> On Thu, 2008-01-17 at 14:51 -0800, Andrew Morton wrote:
> > > proc_loop: /proc/3731/task/3731/pagemap
> > > kernel: BUG: sleeping function called from invalid context at fs/proc/task_mmu.c:554
> > > kernel: in_atomic():1, irqs_disabled():0
> > > kernel: Call Trace:
> > > kernel: [cf1cddf0] [c000840c] show_stack+0x3c/0x194 (unreliable)
> > > kernel: [cf1cde20] [c002b2ec] __might_sleep+0xf4/0x108
> > > kernel: [cf1cde30] [c00d2d54] add_to_pagemap+0x40/0x11c
> > > kernel: [cf1cde50] [c00d2f44] pagemap_pte_range+0xa8/0x10c
> > > kernel: [cf1cde70] [c0081b30] walk_page_range+0x148/0x23c
> > > kernel: [cf1cdeb0] [c00d3104] pagemap_read+0x15c/0x244
> > > kernel: [cf1cdef0] [c0092144] vfs_read+0xc4/0x16c
> > > kernel: [cf1cdf10] [c009261c] sys_read+0x4c/0x90
> > > kernel: [cf1cdf40] [c001328c] ret_from_syscall+0x0/0x40
> >
> > It's not really an oops - it's a warning. add_to_pagemap() is doing a
> > put_user() inside pagemap_pte_range->pte_offset_map->kmap_atomic.
> >
> > A known bug, I'm afraid.
> >
> > How to fix?
> >
> > - double-buffer the data to be copied to userspace or
> >
> > - take a local copy of the pte page then work on that instead or
> >
> > - play copy_to_user_inatomic() tricks.
>
> Hmm, this fell off my radar. How about something like this as a minimal
> fix (untested as -mm is a complete doorstop for me at the moment)?
>
> diff -r 5595adaea70f fs/proc/task_mmu.c
> --- a/fs/proc/task_mmu.c Thu Jan 17 13:26:54 2008 -0600
> +++ b/fs/proc/task_mmu.c Thu Jan 17 17:29:21 2008 -0600
> @@ -582,20 +583,26 @@
> {
> struct pagemapread *pm = private;
> pte_t *pte;
> - int err = 0;
> + int offset = 0, err = 0;
>
> pte = pte_offset_map(pmd, addr);
> - for (; addr != end; pte++, addr += PAGE_SIZE) {
> + for (; addr != end; offset++, addr += PAGE_SIZE) {
> u64 pfn = PM_NOT_PRESENT;
> - if (is_swap_pte(*pte))
> - pfn = swap_pte_to_pagemap_entry(*pte);
> - else if (pte_present(*pte))
> - pfn = pte_pfn(*pte);
> + if (is_swap_pte(pte[offset]))
> + pfn = swap_pte_to_pagemap_entry(pte[offset]);
> + else if (pte_present(pte[offset]))
> + pfn = pte_pfn(pte[offset]);
> +#ifdef CONFIG_HIGHPTE
> + pte_unmap(pte);
> err = add_to_pagemap(addr, pfn, pm);
> + pte = pte_offset_map(pmd, addr);
> +#else
> + err = add_to_pagemap(addr, pfn, pm);
> +#endif
> if (err)
> return err;
> }
> - pte_unmap(pte - 1);
> + pte_unmap(pte);
>
> cond_resched();
>
Good point, it really can be taht simple.
Do we need the ifdef? pte_offset_map/pte_unmap should be super-cheap on
!CONFIG_HIGHPTE builds.
^ permalink raw reply
* [Add mpc5121 support PATCHES v3 0/8]
From: John Rigby @ 2008-01-18 0:05 UTC (permalink / raw)
To: linuxppc-dev
This is a new improved set of patches based on the
comments that I received in response to the previous set.
Changes since v2:
1/8 Add-IPIC-config-option.patch
2/8 Add-mpc512x-ipic-support.patch
No changes. These two are in galak's queue for submission.
3/8 Basic-Freescale-MPC512x-support.patch
Added missing of_put_node as pointed out by Stephen Rothwell
Added Acked-by: Grant Likely <grant.likely@secretlab.ca>
4/8 Device-tree-for-MPC5121-ADS.patch
Made changes suggested by Grant Likely
5/8 Separate-MPC52xx-PSC-FIFO-registers-from-rest-of-PSC.patch
6/8 Cleanup-checkpatch.pl-problems-in-mpc52xx_uart.c.patch
No changes. Grant is picking up these patches
7/8 Factor-out-52xx-dependencies-from-52xx-psc-driver.patch
No changes. No comments received. Too ugly to comment?
8/8 Add-MPC512x-support-to-MPC52xx-psc-driver.patch
Added IRQF_SHARED to flags passed to request_irq because
on 5121 all PSCs use the same irq. This should not break
anything on 5200.
^ permalink raw reply
* Re: 2.6.24-rc8-mm1: powerpc oopses
From: Matt Mackall @ 2008-01-17 23:39 UTC (permalink / raw)
To: Andrew Morton; +Cc: linuxppc-dev, Mariusz Kozlowski, paulus, linux-kernel
In-Reply-To: <20080117145105.ad968ea6.akpm@linux-foundation.org>
On Thu, 2008-01-17 at 14:51 -0800, Andrew Morton wrote:
> > proc_loop: /proc/3731/task/3731/pagemap
> > kernel: BUG: sleeping function called from invalid context at fs/proc/task_mmu.c:554
> > kernel: in_atomic():1, irqs_disabled():0
> > kernel: Call Trace:
> > kernel: [cf1cddf0] [c000840c] show_stack+0x3c/0x194 (unreliable)
> > kernel: [cf1cde20] [c002b2ec] __might_sleep+0xf4/0x108
> > kernel: [cf1cde30] [c00d2d54] add_to_pagemap+0x40/0x11c
> > kernel: [cf1cde50] [c00d2f44] pagemap_pte_range+0xa8/0x10c
> > kernel: [cf1cde70] [c0081b30] walk_page_range+0x148/0x23c
> > kernel: [cf1cdeb0] [c00d3104] pagemap_read+0x15c/0x244
> > kernel: [cf1cdef0] [c0092144] vfs_read+0xc4/0x16c
> > kernel: [cf1cdf10] [c009261c] sys_read+0x4c/0x90
> > kernel: [cf1cdf40] [c001328c] ret_from_syscall+0x0/0x40
>
> It's not really an oops - it's a warning. add_to_pagemap() is doing a
> put_user() inside pagemap_pte_range->pte_offset_map->kmap_atomic.
>
> A known bug, I'm afraid.
>
> How to fix?
>
> - double-buffer the data to be copied to userspace or
>
> - take a local copy of the pte page then work on that instead or
>
> - play copy_to_user_inatomic() tricks.
Hmm, this fell off my radar. How about something like this as a minimal
fix (untested as -mm is a complete doorstop for me at the moment)?
diff -r 5595adaea70f fs/proc/task_mmu.c
--- a/fs/proc/task_mmu.c Thu Jan 17 13:26:54 2008 -0600
+++ b/fs/proc/task_mmu.c Thu Jan 17 17:29:21 2008 -0600
@@ -582,20 +583,26 @@
{
struct pagemapread *pm = private;
pte_t *pte;
- int err = 0;
+ int offset = 0, err = 0;
pte = pte_offset_map(pmd, addr);
- for (; addr != end; pte++, addr += PAGE_SIZE) {
+ for (; addr != end; offset++, addr += PAGE_SIZE) {
u64 pfn = PM_NOT_PRESENT;
- if (is_swap_pte(*pte))
- pfn = swap_pte_to_pagemap_entry(*pte);
- else if (pte_present(*pte))
- pfn = pte_pfn(*pte);
+ if (is_swap_pte(pte[offset]))
+ pfn = swap_pte_to_pagemap_entry(pte[offset]);
+ else if (pte_present(pte[offset]))
+ pfn = pte_pfn(pte[offset]);
+#ifdef CONFIG_HIGHPTE
+ pte_unmap(pte);
err = add_to_pagemap(addr, pfn, pm);
+ pte = pte_offset_map(pmd, addr);
+#else
+ err = add_to_pagemap(addr, pfn, pm);
+#endif
if (err)
return err;
}
- pte_unmap(pte - 1);
+ pte_unmap(pte);
cond_resched();
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply
* Re: Driver - HDLC 83xx QUICC Engine??
From: Joakim Tjernlund @ 2008-01-17 23:53 UTC (permalink / raw)
To: rmcguire; +Cc: linuxppc-embedded
In-Reply-To: <001101c85955$fc3b5c20$6405a8c0@absolut>
eh, that looks like something that is part of the kernel already.
Am I missing something?
Jocke
> -----Ursprungligt meddelande-----
> Fr=E5n: Russell McGuire [mailto:rmcguire@videopresence.com]
> Skickat: den 17 januari 2008 23:12
> Till: 'Joakim Tjernlund'
> Kopia: linuxppc-embedded@ozlabs.org; 'Kim Phillips'
> =C4mne: RE: Driver - HDLC 83xx QUICC Engine??
>=20
> Jocke,
>=20
> I ran across this patch doing some looking around. It isn't in the =
kernel I
> downloaded a while ago and have been working with, and I am not sure =
of the
> real extents of its support.
>=20
> Maybe Kim or Kumar can fill us in, on if it is what we are looking =
for.
>=20
> http://patchwork.ozlabs.org/linuxppc/patch?id=3D7262
>=20
>=20
> In any regards, it definitely looks like something we should be =
checking
> out.
>=20
> -Russ
> > -----Original Message-----
> > From: Joakim Tjernlund [mailto:joakim.tjernlund@transmode.se]
> > Sent: Tuesday, January 15, 2008 4:19 PM
> > To: rmcguire@videopresence.com; linuxppc-embedded@ozlabs.org
> > Subject: SV: Driver - HDLC 83xx QUICC Engine??
> >
> > > -----Ursprungligt meddelande-----
> > > Fr=E5n: =
linuxppc-embedded-bounces+joakim.tjernlund=3Dlumentis.se@ozlabs.org
> > [mailto:linuxppc-embedded-
> > > bounces+joakim.tjernlund=3Dlumentis.se@ozlabs.org] F=F6r Russell =
McGuire
> > > Skickat: den 15 januari 2008 20:52
> > > Till: linuxppc-embedded@ozlabs.org
> > > =C4mne: Driver - HDLC 83xx QUICC Engine??
> > >
> > > All,
> > >
> > > Does anyone know of a project or existing driver for supporting =
HDLC for
> > the
> > >
> > > MPC83xx or MPC82XX Freescale CPUs?
> > >
> > > Looking to run raw HDLC over various Ethernet or T1 links.
> > >
> > > -Russ
> >
> > Me too. Perhaps not, I will be looking at presenting a Ethernet i/f =
to the
> > kernel but
> > sending out HDLC frames containing the Ethernet packet. If you =
find/have
> > anything
> > that helps me do that, send it my way please.
> >
> > Jocke
>=20
>=20
^ permalink raw reply
* Re: Problems with PCI on 8280
From: Scott Wood @ 2008-01-17 23:18 UTC (permalink / raw)
To: Rune Torgersen; +Cc: linuxppc-dev
In-Reply-To: <DCEAAC0833DD314AB0B58112AD99B93B039BA0D6@ismail.innsys.innovsys.com>
Rune Torgersen wrote:
> >From: Scott Wood
> >Are you using cuImage, or a regular uImage with a device-tree-aware u-boot
>
> cuImage for now.
>
> >If the former, try commenting out the call to fixup_pci() in
> >arch/powerpc/boot/cuboot-pq2.c and let me know if that changes anything.
>
> Did that, That made our PCI bus fail completely
Hmm... that suggests that something in u-boot's setup is either
incorrect, or (more likely in this case) doesn't match the device tree.
Or maybe it's the bus parking/arbiter tweaking at the end that u-boot is
missing.
> We have our PCI set up to ONE 512MB outbound range doing all three.
> (I can see where you'd save on mem usage by doing two)
>
> I do see a bug tho.
> In our case prefetch is 256MB, memio is 128MB.
> the calculation for outbound wiondow 1 sets the size to ~(pref+mmio-1).
> That only works if the resulting size is a power of 2.
Ah. Yes, I was assuming both windows would be the same size. The code
should be changed to check that, and if any conditions for setting
PCIBRx/PCIMSKx fail, check to see if the firmware-provided values work
(and if not, bail without touching anything).
> If we comment out the rewrite of the outbound windows, we get PCI to work.
> But since our u-boot sets everything up correctly (Including prefecable
> memory) we should not need this? or is it rewriting the device tree in
> some way?
You shouldn't need it... I'd compare the register values u-boot sets
with the values the corrected fixup_pci() sets (including the soc regs
at the end). Something must be different.
There is no device tree re-writing; it tries to program the hardware to
match what's in the device tree.
-Scott
^ permalink raw reply
* RE: Problems with PCI on 8280
From: Rune Torgersen @ 2008-01-17 23:05 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
In-Reply-To: <478FD066.5000803@freescale.com>
[-- Attachment #1: Type: text/plain, Size: 1028 bytes --]
>From: Scott Wood
>Are you using cuImage, or a regular uImage with a device-tree-aware u-boot
cuImage for now.
>If the former, try commenting out the call to fixup_pci() in
>arch/powerpc/boot/cuboot-pq2.c and let me know if that changes anything.
Did that, That made our PCI bus fail completely
Looking in fixup_pci, I see it sets up one outbound window to the size of prefechable and non-prefetcabe memory
and anoter one to the size of the IO.
We have our PCI set up to ONE 512MB outbound range doing all three.
(I can see where you'd save on mem usage by doing two)
I do see a bug tho.
In our case prefetch is 256MB, memio is 128MB.
the calculation for outbound wiondow 1 sets the size to ~(pref+mmio-1). That only works if the resulting size is a power of 2.
If we comment out the rewrite of the outbound windows, we get PCI to work.
But since our u-boot sets everything up correctly (Including prefecable memory) we should not need this? or is it rewriting the device tree in some way?
[-- Attachment #2: Type: text/html, Size: 1509 bytes --]
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox