* Reboot at die_probe
From: Lehmann, Hans (Ritter Elektronik) @ 2008-02-05 13:39 UTC (permalink / raw)
To: linuxppc-embedded
Hi ,
i have strange problems with my cf card driver on our MPC5200 embedded
board. The cf card is mapped to memory space and interrupt is connected
to IRQ1(rising edge sensitive). First the driver was written for Kernel
2.6.14 and worked pretty. Now I ported it to Kernel 2.6.24 and get
strange behaviour I do not understand.
After I load the modul, the kernel start to reboot when i call function
ide_device_add(). The reboot appears while device responses in function
"actual_try_to_identify" (ide-probe.c), after kernel sent the identify
command (0xec) to status/command register (hwif->outb(cmd,
DIE_COMMAND_REG;).=20
To figure out whether card will be identify correct, I changed irq from
edge sensitive to level sensitive and card will be identified proper,
but get error "lost interrupt".
I habe no idea what happend.
Kindly regards
Hans
=20
^ permalink raw reply
* Re: 2.6.24-mm1: ppc32: too few arguments to function 'reserve_bootmem'
From: Bernhard Walle @ 2008-02-05 13:25 UTC (permalink / raw)
To: Andrew Morton; +Cc: linuxppc-dev, Mariusz Kozlowski, paulus, linux-kernel
In-Reply-To: <20080204144036.cf22a402.akpm@linux-foundation.org>
* Andrew Morton <akpm@linux-foundation.org> [2008-02-04 23:40]:
> We did this wrong. We should have introduced a new reserve_bootmem_foo()
> and migrated over to that in stages. Once all callers are migrated, remove
> the old interface.
Well, my original proposal was to add a new function but then someone
complained that we already have too much bootmem functions. I don't
remember if this was on LKML or internally in Bugzilla.
However, sorry, it was my fault of course.
Bernhard
^ permalink raw reply
* Re: [PATCH] [POWERPC] get rid of `model = "UCC"' in the ucc nodes
From: David Gibson @ 2008-02-05 13:20 UTC (permalink / raw)
To: Grant Likely; +Cc: Scott Wood, linuxppc-dev, Jon Loeliger
In-Reply-To: <fa686aa40802010823n1b837ffk7110a72e2bd44bf6@mail.gmail.com>
On Fri, Feb 01, 2008 at 09:23:47AM -0700, Grant Likely wrote:
> On 2/1/08, Kumar Gala <galak@kernel.crashing.org> wrote:
> >
> > > --- a/Documentation/powerpc/booting-without-of.txt
> > > +++ b/Documentation/powerpc/booting-without-of.txt
> > > @@ -1675,7 +1675,6 @@ platforms are moved over to use the flattened-
> > > device-tree model.
> > > ucc@2000 {
> > > device_type = "network";
> > > compatible = "ucc_geth";
> > > - model = "UCC";
> > > device-id = <1>;
> >
> > can we change device-id to cell-index?
>
> <aside>
> Here's a thought; do we really need a cell-index at all? (and I'm
> talking in general; not just this specific case). I'm starting to
> think we should migrate away from using it.
_Need_ perhaps not, but in some cases I think the alternatives are
overly complex.
> cell-index has been useful for things like clock controllers to know
> what offset into a shared clock control register or something like
> that and a driver would pass the cell-index value to the shared reg
> driver when requesting service.
Right. Except that if the shared resource is just a single register,
calling the routines to access it a "shared reg driver" gives a
misleading impression. Depending on how the shared reg is used, even
a lock may not be necessary, so potentially the drivers for the
individual device instances using the shared resource can (safely)
directly access it.
> However, I think the information
> encoded in cell-index is already encoded in the device tree in a
> different manor.
>
> Typically, shared registers and the like are all chip specific and the
> behaviour of the shared register drivers usually needs to be tweaked
> for different SoCs. Each ip core on an SoC is already uniquely
> indexed via the reg property. True, 'reg' is sparse (0x2000, 0x2200,
> 0x2300, ...) whereas cell-index is tight (0,1,2,3,...), but I don't
> think that introduces any additional difficulty.
>
> So, instead of a driver passing it's cell-index value to the shared
> reg driver, it would pass it's reg base instead. The shared register
> driver could then choose an internal representation that makes sense
> for it instead of whatever layout was chosen by the device tree.
Except that the "shared reg driver" then needs a way to map from reg
property to index. So either it has to have that hardcoded, or the
shared resource will need its own device tree representation for the
mapping.
In some cases the shared resource is complex enough that that makes
sense (e.g. an mdio bus shared between ethernet MACs to take an
extreme example). But when the "shared reg driver" consists entirely
of:
(readl(shared_reg_addr) & (1UL << cell_index))
and/or:
writel(shared_reg_addr, 1UL << cell_index)
your approach would seem to be overkill and then some. (The latter
example can be safe without locking in the case of a read/clear
register).
Exactly this sort of thing is fairly common on 4xx, which is just the
context in which BenH invented "cell-index" as a really simple way of
representing the index into shared registers like this.
> Dropping cell-index would mean one less property to keep in sync when
> tailoring device trees. (== less complexity for board porters).
> Besides, the purpose of cell-index is often misunderstood already by
> people trying to use it to describe port numbers (ttyS0, ttyS1, etc).
This is indeed a problem. But I don't think ditching cell-index
entirely is a sensible solution, sorry.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
^ permalink raw reply
* Re: compile quirk linux-2.6.24 (with workaround)
From: Josh Boyer @ 2008-02-05 13:08 UTC (permalink / raw)
To: Sven Luther; +Cc: linuxppc-dev, Bernhard Reiter, debian-powerpc, paulus
In-Reply-To: <20080204095121.GA18167@powerlinux.fr>
On Mon, 4 Feb 2008 10:51:21 +0100
Sven Luther <sven@powerlinux.fr> wrote:
> On Sun, Feb 03, 2008 at 05:29:05PM +0100, Bernhard Reiter wrote:
> > Dear linux powerpc Maintainers and Users,
> >
> > recently I have tried to compile a new kernel on a Debian sarge ppc
> > system (PowerBook5,6 MacRISC3 Power Macintosh).
>
> This is a G4 based system.
>
> > The build system bailed out with
> > BOOTCC arch/powerpc/boot/4xx.o
> > cc1: error: bad value (440) for -mcpu= switch
> > make[1]: *** [arch/powerpc/boot/4xx.o] Fehler 1
> >
> > I have tracked this a few steps and the attached patch made the compile for me
> > as my compiler gcc-Version 3.3.5 (Debian 1:3.3.5-13)
> > cannot produce code for 4xx it seems.
>
> You should normally not need to build the 4xx bootloader part. Make sure
> that, i don't know why this happens. Can you look into
> arch/powerpc/boot/Makefile, to see what option enables the 4xx build,
> and make sure it is disabled in the main config ?
That's not true. All the wrapper bits are built for every board always.
josh
^ permalink raw reply
* Re: 2.6.24-mm1: ppc32: too few arguments to function 'reserve_bootmem'
From: Sergei Shtylyov @ 2008-02-05 13:00 UTC (permalink / raw)
To: Andrew Morton
Cc: linuxppc-dev, Mariusz Kozlowski, paulus, bwalle, linux-kernel
In-Reply-To: <20080204144036.cf22a402.akpm@linux-foundation.org>
Hello.
Andrew Morton wrote:
>> This is from ppc32:
>> CC arch/powerpc/mm/mem.o
>>arch/powerpc/mm/mem.c: In function 'do_init_bootmem':
>>arch/powerpc/mm/mem.c:256: error: too few arguments to function 'reserve_bootmem'
>>arch/powerpc/mm/mem.c:261: error: too few arguments to function 'reserve_bootmem'
>>Leftover from introduce-flags-for-reserve_bootmem.patch?
> Yes, I've had to fix that patch many times.
> --- a/arch/powerpc/mm/mem.c~introduce-flags-for-reserve_bootmem-powerpc-fix
> +++ a/arch/powerpc/mm/mem.c
> @@ -253,12 +253,13 @@ void __init do_init_bootmem(void)
> lmb_size_bytes(&lmb.reserved, i) - 1;
> if (addr < total_lowmem)
> reserve_bootmem(lmb.reserved.region[i].base,
> - lmb_size_bytes(&lmb.reserved, i));
> + lmb_size_bytes(&lmb.reserved, i),
> + BOOTMEM_DEFAULT);
> else if (lmb.reserved.region[i].base < total_lowmem) {
> unsigned long adjusted_size = total_lowmem -
> lmb.reserved.region[i].base;
> reserve_bootmem(lmb.reserved.region[i].base,
> - adjusted_size);
> + adjusted_size, BOOTMEM_DWEFAULT);
BOOTMEM_DWEFAULT, are you sure? :-)
WBR, Sergei
^ permalink raw reply
* [PATCH] Fix legacy serial search for opb bus ports
From: Michael Ellerman @ 2008-02-05 12:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: paul.gortmaker
The patch to legacy_serial.c (1a7507c7da2df6856e085e0fbb0c9ea8c12ac4e,
Reduce code duplication in legacy_serial, add UART parent types) changed
the semantics for opb ports from type = "opb" || compatible = "ibm,opb"
to type = "opb" && compatible = "ibm,opb".
The result is serial ports on our QS21s (Cell blades) don't get found,
and for some reason the machine doesn't boot at all - possibly it's
panicking due to lack of a console?
The fix is to add two entries to the of_device_id table, one that looks
for type = "opb" and the other compatible = "ibm,opb".
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
---
arch/powerpc/kernel/legacy_serial.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 76b862b..61dd174 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -36,7 +36,8 @@ static struct legacy_serial_info {
static struct __initdata of_device_id parents[] = {
{.type = "soc",},
{.type = "tsi-bridge",},
- {.type = "opb", .compatible = "ibm,opb",},
+ {.type = "opb", },
+ {.compatible = "ibm,opb",},
{.compatible = "simple-bus",},
{.compatible = "wrs,epld-localbus",},
};
--
1.5.2.rc1.1884.g59b20
^ permalink raw reply related
* Re: Commit for mm/page_alloc.c breaks boot process on my machine
From: Mel Gorman @ 2008-02-05 10:23 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linux-kernel, linuxppc-dev
In-Reply-To: <1202169686.7079.17.camel@pasglop>
On (05/02/08 11:01), Benjamin Herrenschmidt didst pronounce:
>
> >
> > It's a virtual address so it depends on the value of CONFIG_KERNEL_START
> > as to whether this is a user program address or not.
>
> Shouldn't it be PAGE_OFFSET ? I mean, CONFIG_KERNEL_START should work
> on powerpc, but still...
>
mel@arnold:~/git/linux-2.6$ grep PAGE_OFFSET include/asm-ppc/page.h
#define PAGE_OFFSET CONFIG_KERNEL_START
--
Mel Gorman
Part-time Phd Student Linux Technology Center
University of Limerick IBM Dublin Software Lab
^ permalink raw reply
* Re: [PATCH 1/1] [PPC] 8xx swap bug-fix
From: Jochen Friedrich @ 2008-02-05 10:01 UTC (permalink / raw)
To: Yuri Tikhonov; +Cc: Scott Wood, linuxppc-dev, Paul Mackerras
In-Reply-To: <200802050946.21292.yur@emcraft.com>
Hi Yuri,
> Does anybody use swap with some of the 8xx-based boards supported in
> powerpc branch ?
modded DBox2 boxes do. Unfortunately, i don't have such a modded box.
The tuxbox project currently uses a really ugly hack to support swapping:
http://git.bocc.de/cgi-bin/gitweb.cgi?p=dbox2.git;a=commitdiff;h=fc9d6ed33d85933f3900718a118a0cc2b776f067
Thanks,
Jochen
^ permalink raw reply
* powerPC 860 Port to asm/powerpc, early_dev_init problem
From: Gray, Steve - UK @ 2008-02-05 9:24 UTC (permalink / raw)
To: linuxppc-embedded
Hi List
I have a PPC860 on our own embedded platform.
I using a denx kernel snapshot from the git repository date 4 Feb 2008
I am using U-boot 1.3.1 with CONFIG_OF_LIBFDT enable, and have ported
into the kernel tree, the necessary makefiles and Kconfig changes, to
give me a kernel that now compiles,
I am able to get this to work as required with asm/ppc, and drop to a
Busybox prompt and mount rootFS over NFS
Oon reading the list this will be dropped this summer, so I have
undertaken the role to port this into the asm/powerpc branch.
I have a problem that I am not able to understand and am looking to the
list for some help.
Using a BDI-3000 I can step through the kernel startup code and
encounter a problem as described below
early_init_devtree prom.c @ line 1042, params =3D 0x7ffec0
Call of_scan_flat_dt prom.c @ line 1058 now my debugger is showing the
passed value as 0xc07ffec0
This now results in a bus error when accessing *p at line 104 of prom.c
This Flat device tree is new to me, and to many others I guess.=20
Im pretty sure that I may of simply overlooked something with this new
flat device tree but am not sure what.=20
I also don't understand why the parameter has changed?
Can any body point me back into the right direction?
Thanks in advance
Steve
^ permalink raw reply
* Re: [PATCH] [POWERPC] Use a sensible default for clock_getres() in the vdso.
From: Chirag Jog @ 2008-02-05 9:07 UTC (permalink / raw)
To: Tony Breeds
Cc: linuxppc-dev, Sripathi Kodi, paulus, linux-kernel, john stultz
In-Reply-To: <20080205051648.GX6887@bakeyournoodle.com>
* Tony Breeds <tony@bakeyournoodle.com> [2008-02-05 16:16:48]:
> On Sun, Jan 27, 2008 at 07:32:59PM +0530, Sripathi Kodi wrote:
> > Hi Paul,
> >
> > On PPC, I see a disparity between clock_getres implementations in the
> > vdso and syscall. I am using a IBM Openpower hardware and 2.6.24 kernel
> > with CONFIG_HIGH_RES_TIMERS=y.
> >
> > clock_getres call for CLOCK_REALTIME returns 1 millisecond. However,
> > when I edit arch/powerpc/kernel/vdso*/gettimeofday.S to force it to use
> > sys_clock_getres, I get 1 nanosecond resolution. The code in vdso seems
> > to be returning some pre-defined (incorrect) variables.
> >
> > Could you please let me know the reason for this? Is it something that
> > should be fixed in vdso?
>
> Can you try the attached patch and see it if works for you?
I tried this patch.
It seems to solve the reported problem and give a 1ns resolution.
Thanks.
--
Cheers,
Chirag Jog
^ permalink raw reply
* Re: [PATCH] [POWERPC] iSeries: fix section mismatch in viocd
From: Jens Axboe @ 2008-02-05 8:17 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: ppc-dev, paulus
In-Reply-To: <20080205141731.49a91ed4.sfr@canb.auug.org.au>
On Tue, Feb 05 2008, Stephen Rothwell wrote:
> WARNING: drivers/cdrom/viocd.o(.text+0x504): Section mismatch in reference from the function .viocd_probe() to the function .init.text:.find_capability()
>
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> ---
> drivers/cdrom/viocd.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> Jens, can this go in through the powerpc tree?
Certainly
--
Jens Axboe
^ permalink raw reply
* Re: [PATCH 1/1] [PPC] 8xx swap bug-fix
From: Benjamin Herrenschmidt @ 2008-02-05 7:37 UTC (permalink / raw)
To: Yuri Tikhonov; +Cc: linuxppc-dev, Paul Mackerras
In-Reply-To: <200802021047.32055.yur@emcraft.com>
On Sat, 2008-02-02 at 10:47 +0300, Yuri Tikhonov wrote:
> Hello,
>
> Here is the patch which makes Linux-2.6 swap routines operate correctly on
> the ppc-8xx-based machines.
Best is to just remove writeback completely and let the generic
code handle it.
Ben.
> Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
> --
> diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S
> index eb8d26f..321bda2 100644
> --- a/arch/ppc/kernel/head_8xx.S
> +++ b/arch/ppc/kernel/head_8xx.S
> @@ -329,8 +329,18 @@ InstructionTLBMiss:
> mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
> lwz r10, 0(r11) /* Get the pte */
>
> +#ifdef CONFIG_SWAP
> + /* do not set the _PAGE_ACCESSED bit of a non-present page */
> + andi. r11, r10, _PAGE_PRESENT
> + beq 4f
> + ori r10, r10, _PAGE_ACCESSED
> + mfspr r11, SPRN_MD_TWC /* get the pte address again */
> + stw r10, 0(r11)
> +4:
> +#else
> ori r10, r10, _PAGE_ACCESSED
> stw r10, 0(r11)
> +#endif
>
> /* The Linux PTE won't go exactly into the MMU TLB.
> * Software indicator bits 21, 22 and 28 must be clear.
> @@ -395,8 +405,17 @@ DataStoreTLBMiss:
> DO_8xx_CPU6(0x3b80, r3)
> mtspr SPRN_MD_TWC, r11
>
> - mfspr r11, SPRN_MD_TWC /* get the pte address again */
> +#ifdef CONFIG_SWAP
> + /* do not set the _PAGE_ACCESSED bit of a non-present page */
> + andi. r11, r10, _PAGE_PRESENT
> + beq 4f
> + ori r10, r10, _PAGE_ACCESSED
> +4:
> + /* and update pte in table */
> +#else
> ori r10, r10, _PAGE_ACCESSED
> +#endif
> + mfspr r11, SPRN_MD_TWC /* get the pte address again */
> stw r10, 0(r11)
>
> /* The Linux PTE won't go exactly into the MMU TLB.
> @@ -575,7 +594,16 @@ DataTLBError:
>
> /* Update 'changed', among others.
> */
> +#ifdef CONFIG_SWAP
> + ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
> + /* do not set the _PAGE_ACCESSED bit of a non-present page */
> + andi. r11, r10, _PAGE_PRESENT
> + beq 4f
> + ori r10, r10, _PAGE_ACCESSED
> +4:
> +#else
> ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
> +#endif
> mfspr r11, SPRN_MD_TWC /* Get pte address again */
> stw r10, 0(r11) /* and update pte in table */
>
> diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
> index c159315..76717ff 100644
> --- a/include/asm-ppc/pgtable.h
> +++ b/include/asm-ppc/pgtable.h
> @@ -341,14 +341,6 @@ extern unsigned long ioremap_bot, ioremap_base;
> #define _PMD_PAGE_MASK 0x000c
> #define _PMD_PAGE_8M 0x000c
>
> -/*
> - * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE
> - * for an address even if _PAGE_PRESENT is not set, as a performance
> - * optimization. This is a bug if you ever want to use swap unless
> - * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific
> - * definitions for __swp_entry etc. below, which would be gross.
> - * -- paulus
> - */
> #define _PTE_NONE_MASK _PAGE_ACCESSED
>
> #else /* CONFIG_6xx */
>
^ permalink raw reply
* Re: [PATCH 1/1] [PPC] 8xx swap bug-fix
From: Yuri Tikhonov @ 2008-02-05 6:46 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev, Paul Mackerras
In-Reply-To: <20080204182421.GA3930@loki.buserror.net>
Hi Scott,
You are right. The TLB handlers for 8xx in arch/powerpc branch set the
PAGE_ACCESSED flag unconditionally too. And the
include/asm-powerpc/pgtable-ppc32.h file still includes the comment that this
is the bug. So, probably the corresponding patch for powerpc branch will be
usefull. Does anybody use swap with some of the 8xx-based boards supported in
powerpc branch ?
Regards, Yuri
On Monday 04 February 2008 21:24, Scott Wood wrote:
> On Sat, Feb 02, 2008 at 12:22:17PM +0100, Jochen Friedrich wrote:
> > Hi Yuri,
> >
> > > Here is the patch which makes Linux-2.6 swap routines operate correctly
on
> > > the ppc-8xx-based machines.
> >
> > is there any 8xx board left which isn't ported to ARCH=powerpc?
>
> More importantly, is this something that is also broken in arch/powerpc? It
> looks like it has the same code...
>
> -Scott
>
--
Yuri Tikhonov, Senior Software Engineer
Emcraft Systems, www.emcraft.com
^ permalink raw reply
* Re: [PATCH 5/6] Add OF-tree support to RapidIO controller driver.
From: Stephen Rothwell @ 2008-02-05 5:44 UTC (permalink / raw)
To: Zhang Wei; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <12016890832943-git-send-email-wei.zhang@freescale.com>
[-- Attachment #1: Type: text/plain, Size: 752 bytes --]
On Wed, 30 Jan 2008 18:30:52 +0800 Zhang Wei <wei.zhang@freescale.com> wrote:
>
> -void fsl_rio_setup(int law_start, int law_size)
> +int fsl_rio_setup(struct of_device *dev)
> {
> + if (!dev->node) {
> + dev_err(&dev->dev, "Device OF-Node is NULL");
> + return -EFAULT;
Probably -EINVAL would be better. Here and all the other -EFAULTs.
> + aw = *(u32 *)of_get_property(dev->node, "#address-cells", NULL);
> + sw = *(u32 *)of_get_property(dev->node, "#size-cells", NULL);
What happens if either of these properties is missing?
> +static struct of_device_id fsl_of_rio_rpn_ids[] = {
This should be "const" please.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* [PATCH] [POWERPC] Use a sensible default for clock_getres() in the vdso.
From: Tony Breeds @ 2008-02-05 5:16 UTC (permalink / raw)
To: Sripathi Kodi; +Cc: linuxppc-dev, paulus, linux-kernel, john stultz
In-Reply-To: <200801271932.59823.sripathik@in.ibm.com>
On Sun, Jan 27, 2008 at 07:32:59PM +0530, Sripathi Kodi wrote:
> Hi Paul,
>
> On PPC, I see a disparity between clock_getres implementations in the
> vdso and syscall. I am using a IBM Openpower hardware and 2.6.24 kernel
> with CONFIG_HIGH_RES_TIMERS=y.
>
> clock_getres call for CLOCK_REALTIME returns 1 millisecond. However,
> when I edit arch/powerpc/kernel/vdso*/gettimeofday.S to force it to use
> sys_clock_getres, I get 1 nanosecond resolution. The code in vdso seems
> to be returning some pre-defined (incorrect) variables.
>
> Could you please let me know the reason for this? Is it something that
> should be fixed in vdso?
Can you try the attached patch and see it if works for you?
From: Tony Breeds <tony@bakeyournoodle.com>
Subject: [PATCH] [POWERPC] Use a sensible default for clock_getres() in the vdso.
This ensures that the syscall and the (fast) vdso versions of clock_getres()
will return the same resolution.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
---
arch/powerpc/kernel/asm-offsets.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index ed083fe..e6e4928 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -22,6 +22,7 @@
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/suspend.h>
+#include <linux/hrtimer.h>
#ifdef CONFIG_PPC64
#include <linux/time.h>
#include <linux/hardirq.h>
@@ -312,7 +313,7 @@ int main(void)
DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
- DEFINE(CLOCK_REALTIME_RES, TICK_NSEC);
+ DEFINE(CLOCK_REALTIME_RES, (KTIME_MONOTONIC_RES).tv64);
#ifdef CONFIG_BUG
DEFINE(BUG_ENTRY_SIZE, sizeof(struct bug_entry));
--
1.5.4
Yours Tony
linux.conf.au http://linux.conf.au/ || http://lca2008.linux.org.au/
Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!
^ permalink raw reply related
* Re: [PATCH] [POWERPC] of: add alias helper functions.
From: Stephen Rothwell @ 2008-02-05 4:21 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev, davem, david
In-Reply-To: <20080204161604.10674.9289.stgit@trillian.secretlab.ca>
[-- Attachment #1: Type: text/plain, Size: 1409 bytes --]
Hi Grant,
On Mon, 04 Feb 2008 09:16:08 -0700 Grant Likely <grant.likely@secretlab.ca> wrote:
>
> From: Grant Likely <grant.likely@secretlab.ca>
>
> Add helper functions for translating back and forth between alias
> properties and device tree nodes.
Do you have a use for this yet (I assume you do - it would be nice to
have a reason in the changelog)?
Overall looks ok, just a few comments?
Dave (Miller) is this useful for Sparc?
> +struct device_node *of_find_node_by_alias(const char *alias)
> +{
> + struct device_node *np, *alias_np;
> + const char *path;
> +
> + np = NULL;
struct device_node *np = NULL;
struct device_node *alias_np;
> +const char *of_node_alias(struct device_node *np, const char *prefix)
> + /* Loop over the aliases looking for a match */
> + alias = NULL;
> + for (pp = alias_np->properties; pp != 0; pp = pp->next) {
^
Use NULL for pointers (or just test "pp").
> + if (test_np == np)
> + alias = pp->name + prefix_len;
> + of_node_put(test_np);
> + if (alias)
> + break;
This could be:
of_node_put(test_np);
if (test_np == np) {
alias = pp->name + prefix_len;
break;
}
As you can still test for pointer equality after dropping the ref count.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* [PATCH] [POWERPC] iSeries: fix section mismatch in iseries_veth
From: Stephen Rothwell @ 2008-02-05 3:19 UTC (permalink / raw)
To: paulus; +Cc: ppc-dev, Jeff Garzik, netdev
WARNING: vmlinux.o(.text+0x25dca0): Section mismatch in reference from the function .veth_probe() to the function .init.text:.veth_probe_one()
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
drivers/net/iseries_veth.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Jeff, can this go in through the powerpc tree?
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 419861c..58d3bb6 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -1020,7 +1020,7 @@ static const struct ethtool_ops ops = {
.get_link = veth_get_link,
};
-static struct net_device * __init veth_probe_one(int vlan,
+static struct net_device *veth_probe_one(int vlan,
struct vio_dev *vio_dev)
{
struct net_device *dev;
--
1.5.4
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
^ permalink raw reply related
* [PATCH] [POWERPC] iSeries: fix section mismatch in viocd
From: Stephen Rothwell @ 2008-02-05 3:17 UTC (permalink / raw)
To: paulus; +Cc: Jens Axboe, ppc-dev
WARNING: drivers/cdrom/viocd.o(.text+0x504): Section mismatch in reference from the function .viocd_probe() to the function .init.text:.find_capability()
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
drivers/cdrom/viocd.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Jens, can this go in through the powerpc tree?
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 8473b9f..cac06bc 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -558,7 +558,7 @@ static struct cdrom_device_ops viocd_dops = {
.capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_GENERIC_PACKET | CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_RAM
};
-static int __init find_capability(const char *type)
+static int find_capability(const char *type)
{
struct capability_entry *entry;
--
1.5.4
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
^ permalink raw reply related
* [PATCH] [POWERPC] iSeries: fix section mismatch in viodsasd
From: Stephen Rothwell @ 2008-02-05 3:15 UTC (permalink / raw)
To: paulus; +Cc: ppc-dev
WARNING: vmlinux.o(.text+0x3017c): Section mismatch in reference from the function .vio_create_viodasd() to the function .devinit.text:.vio_register_device_node()
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/powerpc/kernel/vio.c | 2 +-
include/asm-powerpc/vio.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index f0bad70..f988672 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -176,7 +176,7 @@ static void __devinit vio_dev_release(struct device *dev)
* Returns a pointer to the created vio_dev or NULL if node has
* NULL device_type or compatible fields.
*/
-struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node)
+struct vio_dev *vio_register_device_node(struct device_node *of_node)
{
struct vio_dev *viodev;
const unsigned int *unit_address;
diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h
index 9204c15..56512a9 100644
--- a/include/asm-powerpc/vio.h
+++ b/include/asm-powerpc/vio.h
@@ -66,7 +66,7 @@ extern void __devinit vio_unregister_device(struct vio_dev *dev);
struct device_node;
-extern struct vio_dev * __devinit vio_register_device_node(
+extern struct vio_dev *vio_register_device_node(
struct device_node *node_vdev);
extern const void *vio_get_attribute(struct vio_dev *vdev, char *which,
int *length);
--
1.5.4
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
^ permalink raw reply related
* Re: [PATCH 2/10] sbc8560: Add v1 device tree source for Wind River SBC8560 board
From: David Gibson @ 2008-02-05 2:40 UTC (permalink / raw)
To: Kumar Gala; +Cc: Paul Gortmaker, linuxppc-dev
In-Reply-To: <FF018A8D-21AC-4F05-887B-66B99A0D444C@kernel.crashing.org>
On Fri, Feb 01, 2008 at 08:46:32AM -0600, Kumar Gala wrote:
>
> On Feb 1, 2008, at 1:54 AM, David Gibson wrote:
>
> > On Thu, Jan 24, 2008 at 06:41:24PM -0500, Paul Gortmaker wrote:
[snip]
> >> + epld@5,0 {
> >
> > I'm not entirely convinced on this two-level representation. I think
> > the FSL people need to get together and define a binding (or set of
> > bindings) for their various chipselect style external bus bridges.
>
> It seems reasonable if you had a FPGA off of the localbus to have a
> two level representation. One for the localbus controller on the FSL
> part and the child to describe the FPGA.
>
> What are you expecting beyond what we have today? I guess I'm asking
> what's missing from the localbus nodes we have?
Sorry, I was probably misleading. All I really meant is that I don't
know enough about these FSL bus bridge arrangements to assess if this
representation is the most sensible one. I'm presuming that this
chipselect bridge unit is a more-or-less standard ASIC appearing on
lots of the FSL chips, so it would be nice to have a standard binding
for them, as we do for the roughly-equivalent EBC bridge on 4xx.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
^ permalink raw reply
* [PATCH] [POWERPC] avoid possible extra of_node_put in axon_msi.c
From: Stephen Rothwell @ 2008-02-05 2:13 UTC (permalink / raw)
To: Michael Ellerman; +Cc: ppc-dev, paulus
I got this warning from gcc:
arch/powerpc/platforms/cell/axon_msi.c:118: warning: 'tmp' may be used uninitialized in this function
Which turns out to be a false positive, but pointed out that it was
possible for the error path in find_msi_translator() to do an extra
of_node_put on a node. This fixes it by localising the ref counting
a bit. As a side effect, the warning goes away.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/powerpc/platforms/cell/axon_msi.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index 095988f..7a177ba 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -139,6 +139,7 @@ static struct axon_msic *find_msi_translator(struct pci_dev *dev)
tmp = dn;
dn = of_find_node_by_phandle(*ph);
+ of_node_put(tmp);
if (!dn) {
dev_dbg(&dev->dev,
"axon_msi: msi-translator doesn't point to a node\n");
@@ -156,7 +157,6 @@ static struct axon_msic *find_msi_translator(struct pci_dev *dev)
out_error:
of_node_put(dn);
- of_node_put(tmp);
return msic;
}
--
1.5.4
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
^ permalink raw reply related
* [PATCH] ppc: fix #ifdef-s in mediabay driver (take 2)
From: Bartlomiej Zolnierkiewicz @ 2008-02-04 19:47 UTC (permalink / raw)
To: linux-kernel; +Cc: linux-ide, Andrew Morton, linuxppc-dev
* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef in
check_media_bay() by CONFIG_MAC_FLOPPY one.
* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef-s by
CONFIG_BLK_DEV_IDE_PMAC ones.
* check_media_bay() is used only by drivers/block/swim3.c
so make this function available only if CONFIG_MAC_FLOPPY
is defined.
* check_media_bay_by_base() and media_bay_set_ide_infos()
are used only by drivers/ide/ppc/pmac.c so so make these
functions available only if CONFIG_MAC_FLOPPY is defined.
v2:
* Remove ifdefs from function prototypes. (Andrew Morton)
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/macintosh/mediabay.c | 46 ++++++++++++++++++-----------------------
include/asm-powerpc/mediabay.h | 8 +++----
2 files changed, 25 insertions(+), 29 deletions(-)
Index: b/drivers/macintosh/mediabay.c
===================================================================
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -78,12 +78,14 @@ struct media_bay_info {
int cached_gpio;
int sleeping;
struct semaphore lock;
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
void __iomem *cd_base;
- int cd_index;
int cd_irq;
int cd_retry;
#endif
+#if defined(CONFIG_BLK_DEV_IDE_PMAC) || defined(CONFIG_MAC_FLOPPY)
+ int cd_index;
+#endif
};
#define MAX_BAYS 2
@@ -91,7 +93,7 @@ struct media_bay_info {
static struct media_bay_info media_bays[MAX_BAYS];
int media_bay_count = 0;
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
/* check the busy bit in the media-bay ide interface
(assumes the media-bay contains an ide device) */
#define MB_IDE_READY(i) ((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0)
@@ -401,7 +403,7 @@ static void poll_media_bay(struct media_
set_mb_power(bay, id != MB_NO);
bay->content_id = id;
if (id == MB_NO) {
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
bay->cd_retry = 0;
#endif
printk(KERN_INFO "media bay %d is empty\n", bay->index);
@@ -414,9 +416,9 @@ static void poll_media_bay(struct media_
}
}
+#ifdef CONFIG_MAC_FLOPPY
int check_media_bay(struct device_node *which_bay, int what)
{
-#ifdef CONFIG_BLK_DEV_IDE
int i;
for (i=0; i<media_bay_count; i++)
@@ -426,14 +428,14 @@ int check_media_bay(struct device_node *
media_bays[i].cd_index = -1;
return -EINVAL;
}
-#endif /* CONFIG_BLK_DEV_IDE */
return -ENODEV;
}
EXPORT_SYMBOL(check_media_bay);
+#endif /* CONFIG_MAC_FLOPPY */
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
int check_media_bay_by_base(unsigned long base, int what)
{
-#ifdef CONFIG_BLK_DEV_IDE
int i;
for (i=0; i<media_bay_count; i++)
@@ -443,15 +445,13 @@ int check_media_bay_by_base(unsigned lon
media_bays[i].cd_index = -1;
return -EINVAL;
}
-#endif
-
+
return -ENODEV;
}
int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
- int irq, int index)
+ int irq, int index)
{
-#ifdef CONFIG_BLK_DEV_IDE
int i;
for (i=0; i<media_bay_count; i++) {
@@ -483,10 +483,10 @@ int media_bay_set_ide_infos(struct devic
return -ENODEV;
}
}
-#endif /* CONFIG_BLK_DEV_IDE */
-
+
return -ENODEV;
}
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
static void media_bay_step(int i)
{
@@ -521,14 +521,13 @@ static void media_bay_step(int i)
bay->state = mb_resetting;
MBDBG("mediabay%d: waiting reset (kind:%d)\n", i, bay->content_id);
break;
-
case mb_resetting:
if (bay->content_id != MB_CD) {
MBDBG("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
bay->state = mb_up;
break;
}
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
MBDBG("mediabay%d: waiting IDE reset (kind:%d)\n", i, bay->content_id);
bay->ops->un_reset_ide(bay);
bay->timer = msecs_to_jiffies(MB_IDE_WAIT);
@@ -536,16 +535,14 @@ static void media_bay_step(int i)
#else
printk(KERN_DEBUG "media-bay %d is ide (not compiled in kernel)\n", i);
set_mb_power(bay, 0);
-#endif /* CONFIG_BLK_DEV_IDE */
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
break;
-
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
case mb_ide_resetting:
bay->timer = msecs_to_jiffies(MB_IDE_TIMEOUT);
bay->state = mb_ide_waiting;
MBDBG("mediabay%d: waiting IDE ready (kind:%d)\n", i, bay->content_id);
break;
-
case mb_ide_waiting:
if (bay->cd_base == NULL) {
bay->timer = 0;
@@ -587,11 +584,10 @@ static void media_bay_step(int i)
bay->timer = 0;
}
break;
-#endif /* CONFIG_BLK_DEV_IDE */
-
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
case mb_powering_down:
bay->state = mb_empty;
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
if (bay->cd_index >= 0) {
printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i,
bay->cd_index);
@@ -607,7 +603,7 @@ static void media_bay_step(int i)
bay->content_id = MB_NO;
}
}
-#endif /* CONFIG_BLK_DEV_IDE */
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
MBDBG("mediabay%d: end of power down\n", i);
break;
}
@@ -739,7 +735,7 @@ static int media_bay_resume(struct macio
bay->last_value = bay->content_id;
bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
bay->cd_retry = 0;
#endif
do {
@@ -829,7 +825,7 @@ static int __init media_bay_init(void)
for (i=0; i<MAX_BAYS; i++) {
memset((char *)&media_bays[i], 0, sizeof(struct media_bay_info));
media_bays[i].content_id = -1;
-#ifdef CONFIG_BLK_DEV_IDE
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
media_bays[i].cd_index = -1;
#endif
}
Index: b/include/asm-powerpc/mediabay.h
===================================================================
--- a/include/asm-powerpc/mediabay.h
+++ b/include/asm-powerpc/mediabay.h
@@ -18,14 +18,14 @@
#define MB_NO 7 /* media bay contains nothing */
int check_media_bay(struct device_node *which_bay, int what);
-int check_media_bay_by_base(unsigned long base, int what);
/* Number of bays in the machine or 0 */
extern int media_bay_count;
-/* called by pmac-ide.c to register IDE controller for media bay */
-extern int media_bay_set_ide_infos(struct device_node* which_bay,
- unsigned long base, int irq, int index);
+int check_media_bay_by_base(unsigned long base, int what);
+/* called by IDE PMAC host driver to register IDE controller for media bay */
+int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
+ int irq, int index);
#endif /* __KERNEL__ */
#endif /* _PPC_MEDIABAY_H */
^ permalink raw reply
* RE: [PATCH] [POWERPC] Xilinx: hwicap driver
From: Stephen Neuendorffer @ 2008-02-05 0:38 UTC (permalink / raw)
To: Stephen Neuendorffer, linuxppc-dev, grant.likely, jacmet, ntl
In-Reply-To: <1201900363-25230-1-git-send-email-stephen.neuendorffer@xilinx.com>
[-- Attachment #1: Type: text/plain, Size: 67648 bytes --]
Grant,
One of the modifications to the include files got lost, so this won't compile. I also have the corresponding update to booting-without-of.txt queued up. However, webmail won't show me the message id for the thread (grr.), so I'll send it tomorrow when I'm in the office.
Steve
-----Original Message-----
From: Stephen Neuendorffer [mailto:stephen.neuendorffer@xilinx.com]
Sent: Fri 2/1/2008 1:12 PM
To: linuxppc-dev@ozlabs.org; grant.likely@secretlab.ca; jacmet@sunsite.dk; ntl@pobox.com
Cc: Stephen Neuendorffer
Subject: [PATCH] [POWERPC] Xilinx: hwicap driver
This includes code for new fifo-based xps_hwicap in addition to the
older opb_hwicap, which has a significantly different interface. The
common code between the two drivers is largely shared.
Significant differences exists between this driver and what is
supported in the EDK drivers. In particular, most of the
architecture-specific code for reconfiguring individual FPGA resources
has been removed. This functionality is likely better provided in a
user-space support library. In addition, read and write access is
supported. In addition, although the xps_hwicap cores support
interrupt-driver mode, this driver only supports polled operation, in
order to make the code simpler, and since the interrupt processing
overhead is likely to slow down the throughput under Linux.
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Fixed to add mutexes, and a few style issues.
Acked-by: Grant Likely <grant.likely@secretlab.ca>
---
I will get this right eventually. :)
---
drivers/char/Kconfig | 7 +
drivers/char/Makefile | 1 +
drivers/char/xilinx_hwicap/Makefile | 7 +
drivers/char/xilinx_hwicap/buffer_icap.c | 380 ++++++++++++
drivers/char/xilinx_hwicap/buffer_icap.h | 57 ++
drivers/char/xilinx_hwicap/fifo_icap.c | 381 ++++++++++++
drivers/char/xilinx_hwicap/fifo_icap.h | 62 ++
drivers/char/xilinx_hwicap/xilinx_hwicap.c | 904 ++++++++++++++++++++++++++++
drivers/char/xilinx_hwicap/xilinx_hwicap.h | 193 ++++++
9 files changed, 1992 insertions(+), 0 deletions(-)
create mode 100644 drivers/char/xilinx_hwicap/Makefile
create mode 100644 drivers/char/xilinx_hwicap/buffer_icap.c
create mode 100644 drivers/char/xilinx_hwicap/buffer_icap.h
create mode 100644 drivers/char/xilinx_hwicap/fifo_icap.c
create mode 100644 drivers/char/xilinx_hwicap/fifo_icap.h
create mode 100644 drivers/char/xilinx_hwicap/xilinx_hwicap.c
create mode 100644 drivers/char/xilinx_hwicap/xilinx_hwicap.h
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index ef1ed5d..157ae2a 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -831,6 +831,13 @@ config DTLK
To compile this driver as a module, choose M here: the
module will be called dtlk.
+config XILINX_HWICAP
+ tristate "Xilinx HWICAP Support"
+ depends on XILINX_VIRTEX
+ help
+ This option enables support for Xilinx Internal Configuration
+ Access Port (ICAP) driver.
+
config R3964
tristate "Siemens R3964 line discipline"
---help---
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 07304d5..3a278a0 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_EFI_RTC) += efirtc.o
obj-$(CONFIG_SGI_DS1286) += ds1286.o
obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
obj-$(CONFIG_DS1302) += ds1302.o
+obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap/
ifeq ($(CONFIG_GENERIC_NVRAM),y)
obj-$(CONFIG_NVRAM) += generic_nvram.o
else
diff --git a/drivers/char/xilinx_hwicap/Makefile b/drivers/char/xilinx_hwicap/Makefile
new file mode 100644
index 0000000..5491cbc
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Xilinx OPB hwicap driver
+#
+
+obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap_m.o
+
+xilinx_hwicap_m-y := xilinx_hwicap.o fifo_icap.o buffer_icap.o
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
new file mode 100644
index 0000000..dfea2bd
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -0,0 +1,380 @@
+/*****************************************************************************
+ *
+ * Author: Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
+ * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
+ * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE.
+ *
+ * Xilinx products are not intended for use in life support appliances,
+ * devices, or systems. Use in such applications is expressly prohibited.
+ *
+ * (c) Copyright 2003-2008 Xilinx Inc.
+ * All rights reserved.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#include "buffer_icap.h"
+
+/* Indicates how many bytes will fit in a buffer. (1 BRAM) */
+#define XHI_MAX_BUFFER_BYTES 2048
+#define XHI_MAX_BUFFER_INTS (XHI_MAX_BUFFER_BYTES >> 2)
+
+/* File access and error constants */
+#define XHI_DEVICE_READ_ERROR -1
+#define XHI_DEVICE_WRITE_ERROR -2
+#define XHI_BUFFER_OVERFLOW_ERROR -3
+
+#define XHI_DEVICE_READ 0x1
+#define XHI_DEVICE_WRITE 0x0
+
+/* Constants for checking transfer status */
+#define XHI_CYCLE_DONE 0
+#define XHI_CYCLE_EXECUTING 1
+
+/* buffer_icap register offsets */
+
+/* Size of transfer, read & write */
+#define XHI_SIZE_REG_OFFSET 0x800L
+/* offset into bram, read & write */
+#define XHI_BRAM_OFFSET_REG_OFFSET 0x804L
+/* Read not Configure, direction of transfer. Write only */
+#define XHI_RNC_REG_OFFSET 0x808L
+/* Indicates transfer complete. Read only */
+#define XHI_STATUS_REG_OFFSET 0x80CL
+
+/* Constants for setting the RNC register */
+#define XHI_CONFIGURE 0x0UL
+#define XHI_READBACK 0x1UL
+
+/* Constants for the Done register */
+#define XHI_NOT_FINISHED 0x0UL
+#define XHI_FINISHED 0x1UL
+
+#define XHI_BUFFER_START 0
+
+/**
+ * buffer_icap_get_status: Get the contents of the status register.
+ * @parameter base_address: is the base address of the device
+ *
+ * The status register contains the ICAP status and the done bit.
+ *
+ * D8 - cfgerr
+ * D7 - dalign
+ * D6 - rip
+ * D5 - in_abort_l
+ * D4 - Always 1
+ * D3 - Always 1
+ * D2 - Always 1
+ * D1 - Always 1
+ * D0 - Done bit
+ **/
+static inline u32 buffer_icap_get_status(void __iomem *base_address)
+{
+ return in_be32(base_address + XHI_STATUS_REG_OFFSET);
+}
+
+/**
+ * buffer_icap_get_bram: Reads data from the storage buffer bram.
+ * @parameter base_address: contains the base address of the component.
+ * @parameter offset: The word offset from which the data should be read.
+ *
+ * A bram is used as a configuration memory cache. One frame of data can
+ * be stored in this "storage buffer".
+ **/
+static inline u32 buffer_icap_get_bram(void __iomem *base_address,
+ u32 offset)
+{
+ return in_be32(base_address + (offset << 2));
+}
+
+/**
+ * buffer_icap_busy: Return true if the icap device is busy
+ * @parameter base_address: is the base address of the device
+ *
+ * The queries the low order bit of the status register, which
+ * indicates whether the current configuration or readback operation
+ * has completed.
+ **/
+static inline bool buffer_icap_busy(void __iomem *base_address)
+{
+ return (buffer_icap_get_status(base_address) & 1) == XHI_NOT_FINISHED;
+}
+
+/**
+ * buffer_icap_busy: Return true if the icap device is not busy
+ * @parameter base_address: is the base address of the device
+ *
+ * The queries the low order bit of the status register, which
+ * indicates whether the current configuration or readback operation
+ * has completed.
+ **/
+static inline bool buffer_icap_done(void __iomem *base_address)
+{
+ return (buffer_icap_get_status(base_address) & 1) == XHI_FINISHED;
+}
+
+/**
+ * buffer_icap_set_size: Set the size register.
+ * @parameter base_address: is the base address of the device
+ * @parameter data: The size in bytes.
+ *
+ * The size register holds the number of 8 bit bytes to transfer between
+ * bram and the icap (or icap to bram).
+ **/
+static inline void buffer_icap_set_size(void __iomem *base_address,
+ u32 data)
+{
+ out_be32(base_address + XHI_SIZE_REG_OFFSET, data);
+}
+
+/**
+ * buffer_icap_mSetoffsetReg: Set the bram offset register.
+ * @parameter base_address: contains the base address of the device.
+ * @parameter data: is the value to be written to the data register.
+ *
+ * The bram offset register holds the starting bram address to transfer
+ * data from during configuration or write data to during readback.
+ **/
+static inline void buffer_icap_set_offset(void __iomem *base_address,
+ u32 data)
+{
+ out_be32(base_address + XHI_BRAM_OFFSET_REG_OFFSET, data);
+}
+
+/**
+ * buffer_icap_set_rnc: Set the RNC (Readback not Configure) register.
+ * @parameter base_address: contains the base address of the device.
+ * @parameter data: is the value to be written to the data register.
+ *
+ * The RNC register determines the direction of the data transfer. It
+ * controls whether a configuration or readback take place. Writing to
+ * this register initiates the transfer. A value of 1 initiates a
+ * readback while writing a value of 0 initiates a configuration.
+ **/
+static inline void buffer_icap_set_rnc(void __iomem *base_address,
+ u32 data)
+{
+ out_be32(base_address + XHI_RNC_REG_OFFSET, data);
+}
+
+/**
+ * buffer_icap_set_bram: Write data to the storage buffer bram.
+ * @parameter base_address: contains the base address of the component.
+ * @parameter offset: The word offset at which the data should be written.
+ * @parameter data: The value to be written to the bram offset.
+ *
+ * A bram is used as a configuration memory cache. One frame of data can
+ * be stored in this "storage buffer".
+ **/
+static inline void buffer_icap_set_bram(void __iomem *base_address,
+ u32 offset, u32 data)
+{
+ out_be32(base_address + (offset << 2), data);
+}
+
+/**
+ * buffer_icap_device_read: Transfer bytes from ICAP to the storage buffer.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter offset: The storage buffer start address.
+ * @parameter count: The number of words (32 bit) to read from the
+ * device (ICAP).
+ **/
+static int buffer_icap_device_read(struct hwicap_drvdata *drvdata,
+ u32 offset, u32 count)
+{
+
+ s32 retries = 0;
+ void __iomem *base_address = drvdata->base_address;
+
+ if (buffer_icap_busy(base_address))
+ return -EBUSY;
+
+ if ((offset + count) > XHI_MAX_BUFFER_INTS)
+ return -EINVAL;
+
+ /* setSize count*4 to get bytes. */
+ buffer_icap_set_size(base_address, (count << 2));
+ buffer_icap_set_offset(base_address, offset);
+ buffer_icap_set_rnc(base_address, XHI_READBACK);
+
+ while (buffer_icap_busy(base_address)) {
+ retries++;
+ if (retries > XHI_MAX_RETRIES)
+ return -EBUSY;
+ }
+ return 0;
+
+};
+
+/**
+ * buffer_icap_device_write: Transfer bytes from ICAP to the storage buffer.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter offset: The storage buffer start address.
+ * @parameter count: The number of words (32 bit) to read from the
+ * device (ICAP).
+ **/
+static int buffer_icap_device_write(struct hwicap_drvdata *drvdata,
+ u32 offset, u32 count)
+{
+
+ s32 retries = 0;
+ void __iomem *base_address = drvdata->base_address;
+
+ if (buffer_icap_busy(base_address))
+ return -EBUSY;
+
+ if ((offset + count) > XHI_MAX_BUFFER_INTS)
+ return -EINVAL;
+
+ /* setSize count*4 to get bytes. */
+ buffer_icap_set_size(base_address, count << 2);
+ buffer_icap_set_offset(base_address, offset);
+ buffer_icap_set_rnc(base_address, XHI_CONFIGURE);
+
+ while (buffer_icap_busy(base_address)) {
+ retries++;
+ if (retries > XHI_MAX_RETRIES)
+ return -EBUSY;
+ }
+ return 0;
+
+};
+
+/**
+ * buffer_icap_reset: Reset the logic of the icap device.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * Writing to the status register resets the ICAP logic in an internal
+ * version of the core. For the version of the core published in EDK,
+ * this is a noop.
+ **/
+void buffer_icap_reset(struct hwicap_drvdata *drvdata)
+{
+ out_be32(drvdata->base_address + XHI_STATUS_REG_OFFSET, 0xFEFE);
+}
+
+/**
+ * buffer_icap_set_configuration: Load a partial bitstream from system memory.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter data: Kernel address of the partial bitstream.
+ * @parameter size: the size of the partial bitstream in 32 bit words.
+ **/
+int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
+ u32 size)
+{
+ int status;
+ s32 buffer_count = 0;
+ s32 num_writes = 0;
+ bool dirty = 0;
+ u32 i;
+ void __iomem *base_address = drvdata->base_address;
+
+ /* Loop through all the data */
+ for (i = 0, buffer_count = 0; i < size; i++) {
+
+ /* Copy data to bram */
+ buffer_icap_set_bram(base_address, buffer_count, data[i]);
+ dirty = 1;
+
+ if (buffer_count < XHI_MAX_BUFFER_INTS - 1) {
+ buffer_count++;
+ continue;
+ }
+
+ /* Write data to ICAP */
+ status = buffer_icap_device_write(
+ drvdata,
+ XHI_BUFFER_START,
+ XHI_MAX_BUFFER_INTS);
+ if (status != 0) {
+ /* abort. */
+ buffer_icap_reset(drvdata);
+ return status;
+ }
+
+ buffer_count = 0;
+ num_writes++;
+ dirty = 0;
+ }
+
+ /* Write unwritten data to ICAP */
+ if (dirty) {
+ /* Write data to ICAP */
+ status = buffer_icap_device_write(drvdata, XHI_BUFFER_START,
+ buffer_count);
+ if (status != 0) {
+ /* abort. */
+ buffer_icap_reset(drvdata);
+ }
+ return status;
+ }
+
+ return 0;
+};
+
+/**
+ * buffer_icap_get_configuration: Read configuration data from the device.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter data: Address of the data representing the partial bitstream
+ * @parameter size: the size of the partial bitstream in 32 bit words.
+ **/
+int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
+ u32 size)
+{
+ int status;
+ s32 buffer_count = 0;
+ s32 read_count = 0;
+ u32 i;
+ void __iomem *base_address = drvdata->base_address;
+
+ /* Loop through all the data */
+ for (i = 0, buffer_count = XHI_MAX_BUFFER_INTS; i < size; i++) {
+ if (buffer_count == XHI_MAX_BUFFER_INTS) {
+ u32 words_remaining = size - i;
+ u32 words_to_read =
+ words_remaining <
+ XHI_MAX_BUFFER_INTS ? words_remaining :
+ XHI_MAX_BUFFER_INTS;
+
+ /* Read data from ICAP */
+ status = buffer_icap_device_read(
+ drvdata,
+ XHI_BUFFER_START,
+ words_to_read);
+ if (status != 0) {
+ /* abort. */
+ buffer_icap_reset(drvdata);
+ return status;
+ }
+
+ buffer_count = 0;
+ read_count++;
+ }
+
+ /* Copy data from bram */
+ data[i] = buffer_icap_get_bram(base_address, buffer_count);
+ buffer_count++;
+ }
+
+ return 0;
+};
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
new file mode 100644
index 0000000..0318495
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -0,0 +1,57 @@
+/*****************************************************************************
+ *
+ * Author: Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
+ * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
+ * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE.
+ *
+ * Xilinx products are not intended for use in life support appliances,
+ * devices, or systems. Use in such applications is expressly prohibited.
+ *
+ * (c) Copyright 2003-2008 Xilinx Inc.
+ * All rights reserved.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#ifndef XILINX_BUFFER_ICAP_H_ /* prevent circular inclusions */
+#define XILINX_BUFFER_ICAP_H_ /* by using protection macros */
+
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <linux/version.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include "xilinx_hwicap.h"
+
+void buffer_icap_reset(struct hwicap_drvdata *drvdata);
+
+/* Loads a partial bitstream from system memory. */
+int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
+ u32 Size);
+
+/* Loads a partial bitstream from system memory. */
+int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
+ u32 Size);
+
+#endif
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
new file mode 100644
index 0000000..0988314
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -0,0 +1,381 @@
+/*****************************************************************************
+ *
+ * Author: Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
+ * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
+ * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE.
+ *
+ * Xilinx products are not intended for use in life support appliances,
+ * devices, or systems. Use in such applications is expressly prohibited.
+ *
+ * (c) Copyright 2007-2008 Xilinx Inc.
+ * All rights reserved.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#include "fifo_icap.h"
+
+/* Register offsets for the XHwIcap device. */
+#define XHI_GIER_OFFSET 0x1C /* Device Global Interrupt Enable Reg */
+#define XHI_IPISR_OFFSET 0x20 /* Interrupt Status Register */
+#define XHI_IPIER_OFFSET 0x28 /* Interrupt Enable Register */
+#define XHI_WF_OFFSET 0x100 /* Write FIFO */
+#define XHI_RF_OFFSET 0x104 /* Read FIFO */
+#define XHI_SZ_OFFSET 0x108 /* Size Register */
+#define XHI_CR_OFFSET 0x10C /* Control Register */
+#define XHI_SR_OFFSET 0x110 /* Status Register */
+#define XHI_WFV_OFFSET 0x114 /* Write FIFO Vacancy Register */
+#define XHI_RFO_OFFSET 0x118 /* Read FIFO Occupancy Register */
+
+/* Device Global Interrupt Enable Register (GIER) bit definitions */
+
+#define XHI_GIER_GIE_MASK 0x80000000 /* Global Interrupt enable Mask */
+
+/**
+ * HwIcap Device Interrupt Status/Enable Registers
+ *
+ * Interrupt Status Register (IPISR) : This register holds the
+ * interrupt status flags for the device. These bits are toggle on
+ * write.
+ *
+ * Interrupt Enable Register (IPIER) : This register is used to enable
+ * interrupt sources for the device.
+ * Writing a '1' to a bit enables the corresponding interrupt.
+ * Writing a '0' to a bit disables the corresponding interrupt.
+ *
+ * IPISR/IPIER registers have the same bit definitions and are only defined
+ * once.
+ */
+#define XHI_IPIXR_RFULL_MASK 0x00000008 /* Read FIFO Full */
+#define XHI_IPIXR_WEMPTY_MASK 0x00000004 /* Write FIFO Empty */
+#define XHI_IPIXR_RDP_MASK 0x00000002 /* Read FIFO half full */
+#define XHI_IPIXR_WRP_MASK 0x00000001 /* Write FIFO half full */
+#define XHI_IPIXR_ALL_MASK 0x0000000F /* Mask of all interrupts */
+
+/* Control Register (CR) */
+#define XHI_CR_SW_RESET_MASK 0x00000008 /* SW Reset Mask */
+#define XHI_CR_FIFO_CLR_MASK 0x00000004 /* FIFO Clear Mask */
+#define XHI_CR_READ_MASK 0x00000002 /* Read from ICAP to FIFO */
+#define XHI_CR_WRITE_MASK 0x00000001 /* Write from FIFO to ICAP */
+
+/* Status Register (SR) */
+#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
+#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
+#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
+#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
+#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask */
+
+
+#define XHI_WFO_MAX_VACANCY 1024 /* Max Write FIFO Vacancy, in words */
+#define XHI_RFO_MAX_OCCUPANCY 256 /* Max Read FIFO Occupancy, in words */
+/* The maximum amount we can request from fifo_icap_get_configuration
+ at once, in bytes. */
+#define XHI_MAX_READ_TRANSACTION_WORDS 0xFFF
+
+
+/**
+ * fifo_icap_fifo_write: Write data to the write FIFO.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter data: the 32-bit value to be written to the FIFO.
+ *
+ * This function will silently fail if the fifo is full.
+ **/
+static inline void fifo_icap_fifo_write(struct hwicap_drvdata *drvdata,
+ u32 data)
+{
+ dev_dbg(drvdata->dev, "fifo_write: %x\n", data);
+ out_be32(drvdata->base_address + XHI_WF_OFFSET, data);
+}
+
+/**
+ * fifo_icap_fifo_read: Read data from the Read FIFO.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * This function will silently fail if the fifo is empty.
+ **/
+static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
+{
+ u32 data = in_be32(drvdata->base_address + XHI_RF_OFFSET);
+ dev_dbg(drvdata->dev, "fifo_read: %x\n", data);
+ return data;
+}
+
+/**
+ * fifo_icap_set_read_size: Set the the size register.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter data: the size of the following read transaction, in words.
+ **/
+static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata,
+ u32 data)
+{
+ out_be32(drvdata->base_address + XHI_SZ_OFFSET, data);
+}
+
+/**
+ * fifo_icap_start_config: Initiate a configuration (write) to the device.
+ * @parameter drvdata: a pointer to the drvdata.
+ **/
+static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata)
+{
+ out_be32(drvdata->base_address + XHI_CR_OFFSET, XHI_CR_WRITE_MASK);
+ dev_dbg(drvdata->dev, "configuration started\n");
+}
+
+/**
+ * fifo_icap_start_readback: Initiate a readback from the device.
+ * @parameter drvdata: a pointer to the drvdata.
+ **/
+static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata)
+{
+ out_be32(drvdata->base_address + XHI_CR_OFFSET, XHI_CR_READ_MASK);
+ dev_dbg(drvdata->dev, "readback started\n");
+}
+
+/**
+ * fifo_icap_busy: Return true if the ICAP is still processing a transaction.
+ * @parameter drvdata: a pointer to the drvdata.
+ **/
+static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
+{
+ u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET);
+ dev_dbg(drvdata->dev, "Getting status = %x\n", status);
+ return (status & XHI_SR_DONE_MASK) ? 0 : 1;
+}
+
+/**
+ * fifo_icap_write_fifo_vacancy: Query the write fifo available space.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * Return the number of words that can be safely pushed into the write fifo.
+ **/
+static inline u32 fifo_icap_write_fifo_vacancy(
+ struct hwicap_drvdata *drvdata)
+{
+ return in_be32(drvdata->base_address + XHI_WFV_OFFSET);
+}
+
+/**
+ * fifo_icap_read_fifo_occupancy: Query the read fifo available data.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * Return the number of words that can be safely read from the read fifo.
+ **/
+static inline u32 fifo_icap_read_fifo_occupancy(
+ struct hwicap_drvdata *drvdata)
+{
+ return in_be32(drvdata->base_address + XHI_RFO_OFFSET);
+}
+
+/**
+ * fifo_icap_set_configuration: Send configuration data to the ICAP.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter frame_buffer: a pointer to the data to be written to the
+ * ICAP device.
+ * @parameter num_words: the number of words (32 bit) to write to the ICAP
+ * device.
+
+ * This function writes the given user data to the Write FIFO in
+ * polled mode and starts the transfer of the data to
+ * the ICAP device.
+ **/
+int fifo_icap_set_configuration(struct hwicap_drvdata *drvdata,
+ u32 *frame_buffer, u32 num_words)
+{
+
+ u32 write_fifo_vacancy = 0;
+ u32 retries = 0;
+ u32 remaining_words;
+
+ dev_dbg(drvdata->dev, "fifo_set_configuration\n");
+
+ /*
+ * Check if the ICAP device is Busy with the last Read/Write
+ */
+ if (fifo_icap_busy(drvdata))
+ return -EBUSY;
+
+ /*
+ * Set up the buffer pointer and the words to be transferred.
+ */
+ remaining_words = num_words;
+
+ while (remaining_words > 0) {
+ /*
+ * Wait until we have some data in the fifo.
+ */
+ while (write_fifo_vacancy == 0) {
+ write_fifo_vacancy =
+ fifo_icap_write_fifo_vacancy(drvdata);
+ retries++;
+ if (retries > XHI_MAX_RETRIES)
+ return -EIO;
+ }
+
+ /*
+ * Write data into the Write FIFO.
+ */
+ while ((write_fifo_vacancy != 0) &&
+ (remaining_words > 0)) {
+ fifo_icap_fifo_write(drvdata, *frame_buffer);
+
+ remaining_words--;
+ write_fifo_vacancy--;
+ frame_buffer++;
+ }
+ /* Start pushing whatever is in the FIFO into the ICAP. */
+ fifo_icap_start_config(drvdata);
+ }
+
+ /* Wait until the write has finished. */
+ while (fifo_icap_busy(drvdata)) {
+ retries++;
+ if (retries > XHI_MAX_RETRIES)
+ break;
+ }
+
+ dev_dbg(drvdata->dev, "done fifo_set_configuration\n");
+
+ /*
+ * If the requested number of words have not been read from
+ * the device then indicate failure.
+ */
+ if (remaining_words != 0)
+ return -EIO;
+
+ return 0;
+}
+
+/**
+ * fifo_icap_get_configuration: Read configuration data from the device.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter data: Address of the data representing the partial bitstream
+ * @parameter size: the size of the partial bitstream in 32 bit words.
+ *
+ * This function reads the specified number of words from the ICAP device in
+ * the polled mode.
+ */
+int fifo_icap_get_configuration(struct hwicap_drvdata *drvdata,
+ u32 *frame_buffer, u32 num_words)
+{
+
+ u32 read_fifo_occupancy = 0;
+ u32 retries = 0;
+ u32 *data = frame_buffer;
+ u32 remaining_words;
+ u32 words_to_read;
+
+ dev_dbg(drvdata->dev, "fifo_get_configuration\n");
+
+ /*
+ * Check if the ICAP device is Busy with the last Write/Read
+ */
+ if (fifo_icap_busy(drvdata))
+ return -EBUSY;
+
+ remaining_words = num_words;
+
+ while (remaining_words > 0) {
+ words_to_read = remaining_words;
+ /* The hardware has a limit on the number of words
+ that can be read at one time. */
+ if (words_to_read > XHI_MAX_READ_TRANSACTION_WORDS)
+ words_to_read = XHI_MAX_READ_TRANSACTION_WORDS;
+
+ remaining_words -= words_to_read;
+
+ fifo_icap_set_read_size(drvdata, words_to_read);
+ fifo_icap_start_readback(drvdata);
+
+ while (words_to_read > 0) {
+ /* Wait until we have some data in the fifo. */
+ while (read_fifo_occupancy == 0) {
+ read_fifo_occupancy =
+ fifo_icap_read_fifo_occupancy(drvdata);
+ retries++;
+ if (retries > XHI_MAX_RETRIES)
+ return -EIO;
+ }
+
+ if (read_fifo_occupancy > words_to_read)
+ read_fifo_occupancy = words_to_read;
+
+ words_to_read -= read_fifo_occupancy;
+
+ /* Read the data from the Read FIFO. */
+ while (read_fifo_occupancy != 0) {
+ *data++ = fifo_icap_fifo_read(drvdata);
+ read_fifo_occupancy--;
+ }
+ }
+ }
+
+ dev_dbg(drvdata->dev, "done fifo_get_configuration\n");
+
+ return 0;
+}
+
+/**
+ * buffer_icap_reset: Reset the logic of the icap device.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * This function forces the software reset of the complete HWICAP device.
+ * All the registers will return to the default value and the FIFO is also
+ * flushed as a part of this software reset.
+ */
+void fifo_icap_reset(struct hwicap_drvdata *drvdata)
+{
+ u32 reg_data;
+ /*
+ * Reset the device by setting/clearing the RESET bit in the
+ * Control Register.
+ */
+ reg_data = in_be32(drvdata->base_address + XHI_CR_OFFSET);
+
+ out_be32(drvdata->base_address + XHI_CR_OFFSET,
+ reg_data | XHI_CR_SW_RESET_MASK);
+
+ out_be32(drvdata->base_address + XHI_CR_OFFSET,
+ reg_data & (~XHI_CR_SW_RESET_MASK));
+
+}
+
+/**
+ * fifo_icap_flush_fifo: This function flushes the FIFOs in the device.
+ * @parameter drvdata: a pointer to the drvdata.
+ */
+void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata)
+{
+ u32 reg_data;
+ /*
+ * Flush the FIFO by setting/clearing the FIFO Clear bit in the
+ * Control Register.
+ */
+ reg_data = in_be32(drvdata->base_address + XHI_CR_OFFSET);
+
+ out_be32(drvdata->base_address + XHI_CR_OFFSET,
+ reg_data | XHI_CR_FIFO_CLR_MASK);
+
+ out_be32(drvdata->base_address + XHI_CR_OFFSET,
+ reg_data & (~XHI_CR_FIFO_CLR_MASK));
+}
+
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
new file mode 100644
index 0000000..4d3068d
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -0,0 +1,62 @@
+/*****************************************************************************
+ *
+ * Author: Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
+ * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
+ * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE.
+ *
+ * Xilinx products are not intended for use in life support appliances,
+ * devices, or systems. Use in such applications is expressly prohibited.
+ *
+ * (c) Copyright 2007-2008 Xilinx Inc.
+ * All rights reserved.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#ifndef XILINX_FIFO_ICAP_H_ /* prevent circular inclusions */
+#define XILINX_FIFO_ICAP_H_ /* by using protection macros */
+
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <linux/version.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include "xilinx_hwicap.h"
+
+/* Reads integers from the device into the storage buffer. */
+int fifo_icap_get_configuration(
+ struct hwicap_drvdata *drvdata,
+ u32 *FrameBuffer,
+ u32 NumWords);
+
+/* Writes integers to the device from the storage buffer. */
+int fifo_icap_set_configuration(
+ struct hwicap_drvdata *drvdata,
+ u32 *FrameBuffer,
+ u32 NumWords);
+
+void fifo_icap_reset(struct hwicap_drvdata *drvdata);
+void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata);
+
+#endif
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
new file mode 100644
index 0000000..24f6aef
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -0,0 +1,904 @@
+/*****************************************************************************
+ *
+ * Author: Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
+ * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
+ * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE.
+ *
+ * Xilinx products are not intended for use in life support appliances,
+ * devices, or systems. Use in such applications is expressly prohibited.
+ *
+ * (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
+ * (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
+ * (c) Copyright 2007-2008 Xilinx Inc.
+ * All rights reserved.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+/*
+ * This is the code behind /dev/xilinx_icap -- it allows a user-space
+ * application to use the Xilinx ICAP subsystem.
+ *
+ * The following operations are possible:
+ *
+ * open open the port and initialize for access.
+ * release release port
+ * write Write a bitstream to the configuration processor.
+ * read Read a data stream from the configuration processor.
+ *
+ * After being opened, the port is initialized and accessed to avoid a
+ * corrupted first read which may occur with some hardware. The port
+ * is left in a desynched state, requiring that a synch sequence be
+ * transmitted before any valid configuration data. A user will have
+ * exclusive access to the device while it remains open, and the state
+ * of the ICAP cannot be guaranteed after the device is closed. Note
+ * that a complete reset of the core and the state of the ICAP cannot
+ * be performed on many versions of the cores, hence users of this
+ * device should avoid making inconsistent accesses to the device. In
+ * particular, accessing the read interface, without first generating
+ * a write containing a readback packet can leave the ICAP in an
+ * inaccessible state.
+ *
+ * Note that in order to use the read interface, it is first necessary
+ * to write a request packet to the write interface. i.e., it is not
+ * possible to simply readback the bitstream (or any configuration
+ * bits) from a device without specifically requesting them first.
+ * The code to craft such packets is intended to be part of the
+ * user-space application code that uses this device. The simplest
+ * way to use this interface is simply:
+ *
+ * cp foo.bit /dev/xilinx_icap
+ *
+ * Note that unless foo.bit is an appropriately constructed partial
+ * bitstream, this has a high likelyhood of overwriting the design
+ * currently programmed in the FPGA.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <asm/semaphore.h>
+#include <linux/sysctl.h>
+#include <linux/version.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_OF
+/* For open firmware. */
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#endif
+
+#include "xilinx_hwicap.h"
+#include "buffer_icap.h"
+#include "fifo_icap.h"
+
+#define DRIVER_NAME "xilinx_icap"
+
+#define HWICAP_REGS (0x10000)
+
+/* dynamically allocate device number */
+static int xhwicap_major;
+static int xhwicap_minor;
+#define HWICAP_DEVICES 1
+
+module_param(xhwicap_major, int, S_IRUGO);
+module_param(xhwicap_minor, int, S_IRUGO);
+
+/* An array, which is set to true when the device is registered. */
+static bool probed_devices[HWICAP_DEVICES];
+
+static struct class *icap_class;
+
+#define UNIMPLEMENTED 0xFFFF
+
+static const struct config_registers v2_config_registers = {
+ .CRC = 0,
+ .FAR = 1,
+ .FDRI = 2,
+ .FDRO = 3,
+ .CMD = 4,
+ .CTL = 5,
+ .MASK = 6,
+ .STAT = 7,
+ .LOUT = 8,
+ .COR = 9,
+ .MFWR = 10,
+ .FLR = 11,
+ .KEY = 12,
+ .CBC = 13,
+ .IDCODE = 14,
+ .AXSS = UNIMPLEMENTED,
+ .C0R_1 = UNIMPLEMENTED,
+ .CSOB = UNIMPLEMENTED,
+ .WBSTAR = UNIMPLEMENTED,
+ .TIMER = UNIMPLEMENTED,
+ .BOOTSTS = UNIMPLEMENTED,
+ .CTL_1 = UNIMPLEMENTED,
+};
+
+static const struct config_registers v4_config_registers = {
+ .CRC = 0,
+ .FAR = 1,
+ .FDRI = 2,
+ .FDRO = 3,
+ .CMD = 4,
+ .CTL = 5,
+ .MASK = 6,
+ .STAT = 7,
+ .LOUT = 8,
+ .COR = 9,
+ .MFWR = 10,
+ .FLR = UNIMPLEMENTED,
+ .KEY = UNIMPLEMENTED,
+ .CBC = 11,
+ .IDCODE = 12,
+ .AXSS = 13,
+ .C0R_1 = UNIMPLEMENTED,
+ .CSOB = UNIMPLEMENTED,
+ .WBSTAR = UNIMPLEMENTED,
+ .TIMER = UNIMPLEMENTED,
+ .BOOTSTS = UNIMPLEMENTED,
+ .CTL_1 = UNIMPLEMENTED,
+};
+static const struct config_registers v5_config_registers = {
+ .CRC = 0,
+ .FAR = 1,
+ .FDRI = 2,
+ .FDRO = 3,
+ .CMD = 4,
+ .CTL = 5,
+ .MASK = 6,
+ .STAT = 7,
+ .LOUT = 8,
+ .COR = 9,
+ .MFWR = 10,
+ .FLR = UNIMPLEMENTED,
+ .KEY = UNIMPLEMENTED,
+ .CBC = 11,
+ .IDCODE = 12,
+ .AXSS = 13,
+ .C0R_1 = 14,
+ .CSOB = 15,
+ .WBSTAR = 16,
+ .TIMER = 17,
+ .BOOTSTS = 18,
+ .CTL_1 = 19,
+};
+
+/**
+ * hwicap_command_desync: Send a DESYNC command to the ICAP port.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * This command desynchronizes the ICAP After this command, a
+ * bitstream containing a NULL packet, followed by a SYNCH packet is
+ * required before the ICAP will recognize commands.
+ */
+int hwicap_command_desync(struct hwicap_drvdata *drvdata)
+{
+ u32 buffer[4];
+ u32 index = 0;
+
+ /*
+ * Create the data to be written to the ICAP.
+ */
+ buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1;
+ buffer[index++] = XHI_CMD_DESYNCH;
+ buffer[index++] = XHI_NOOP_PACKET;
+ buffer[index++] = XHI_NOOP_PACKET;
+
+ /*
+ * Write the data to the FIFO and intiate the transfer of data present
+ * in the FIFO to the ICAP device.
+ */
+ return drvdata->config->set_configuration(drvdata,
+ &buffer[0], index);
+}
+
+/**
+ * hwicap_command_capture: Send a CAPTURE command to the ICAP port.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * This command captures all of the flip flop states so they will be
+ * available during readback. One can use this command instead of
+ * enabling the CAPTURE block in the design.
+ */
+int hwicap_command_capture(struct hwicap_drvdata *drvdata)
+{
+ u32 buffer[7];
+ u32 index = 0;
+
+ /*
+ * Create the data to be written to the ICAP.
+ */
+ buffer[index++] = XHI_DUMMY_PACKET;
+ buffer[index++] = XHI_SYNC_PACKET;
+ buffer[index++] = XHI_NOOP_PACKET;
+ buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1;
+ buffer[index++] = XHI_CMD_GCAPTURE;
+ buffer[index++] = XHI_DUMMY_PACKET;
+ buffer[index++] = XHI_DUMMY_PACKET;
+
+ /*
+ * Write the data to the FIFO and intiate the transfer of data
+ * present in the FIFO to the ICAP device.
+ */
+ return drvdata->config->set_configuration(drvdata,
+ &buffer[0], index);
+
+}
+
+/**
+ * hwicap_get_configuration_register: Query a configuration register.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter reg: a constant which represents the configuration
+ * register value to be returned.
+ * Examples: XHI_IDCODE, XHI_FLR.
+ * @parameter RegData: returns the value of the register.
+ *
+ * Sends a query packet to the ICAP and then receives the response.
+ * The icap is left in Synched state.
+ */
+int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
+ u32 reg, u32 *RegData)
+{
+ int status;
+ u32 buffer[6];
+ u32 index = 0;
+
+ /*
+ * Create the data to be written to the ICAP.
+ */
+ buffer[index++] = XHI_DUMMY_PACKET;
+ buffer[index++] = XHI_SYNC_PACKET;
+ buffer[index++] = XHI_NOOP_PACKET;
+ buffer[index++] = hwicap_type_1_read(reg) | 1;
+ buffer[index++] = XHI_NOOP_PACKET;
+ buffer[index++] = XHI_NOOP_PACKET;
+
+ /*
+ * Write the data to the FIFO and intiate the transfer of data present
+ * in the FIFO to the ICAP device.
+ */
+ status = drvdata->config->set_configuration(drvdata,
+ &buffer[0], index);
+ if (status)
+ return status;
+
+ /*
+ * Read the configuration register
+ */
+ status = drvdata->config->get_configuration(drvdata, RegData, 1);
+ if (status)
+ return status;
+
+ return 0;
+}
+
+int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
+{
+ int status;
+ u32 idcode;
+
+ dev_dbg(drvdata->dev, "initializing\n");
+
+ /* Abort any current transaction, to make sure we have the
+ * ICAP in a good state. */
+ dev_dbg(drvdata->dev, "Reset...\n");
+ drvdata->config->reset(drvdata);
+
+ dev_dbg(drvdata->dev, "Desync...\n");
+ status = hwicap_command_desync(drvdata);
+ if (status)
+ return status;
+
+ /* Attempt to read the IDCODE from ICAP. This
+ * may not be returned correctly, due to the design of the
+ * hardware.
+ */
+ dev_dbg(drvdata->dev, "Reading IDCODE...\n");
+ status = hwicap_get_configuration_register(
+ drvdata, drvdata->config_regs->IDCODE, &idcode);
+ dev_dbg(drvdata->dev, "IDCODE = %x\n", idcode);
+ if (status)
+ return status;
+
+ dev_dbg(drvdata->dev, "Desync...\n");
+ status = hwicap_command_desync(drvdata);
+ if (status)
+ return status;
+
+ return 0;
+}
+
+static ssize_t
+hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+{
+ struct hwicap_drvdata *drvdata = file->private_data;
+ ssize_t bytes_to_read = 0;
+ u32 *kbuf;
+ u32 words;
+ u32 bytes_remaining;
+ int status;
+
+ if (down_interruptible(&drvdata->sem))
+ return -ERESTARTSYS;
+
+ if (drvdata->read_buffer_in_use) {
+ /* If there are leftover bytes in the buffer, just */
+ /* return them and don't try to read more from the */
+ /* ICAP device. */
+ bytes_to_read =
+ (count < drvdata->read_buffer_in_use) ? count :
+ drvdata->read_buffer_in_use;
+
+ /* Return the data currently in the read buffer. */
+ if (copy_to_user(buf, drvdata->read_buffer, bytes_to_read)) {
+ status = -EFAULT;
+ goto error;
+ }
+ drvdata->read_buffer_in_use -= bytes_to_read;
+ memcpy(drvdata->read_buffer + bytes_to_read,
+ drvdata->read_buffer, 4 - bytes_to_read);
+ } else {
+ /* Get new data from the ICAP, and return was was requested. */
+ kbuf = (u32 *) get_zeroed_page(GFP_KERNEL);
+ if (!kbuf) {
+ status = -ENOMEM;
+ goto error;
+ }
+
+ /* The ICAP device is only able to read complete */
+ /* words. If a number of bytes that do not correspond */
+ /* to complete words is requested, then we read enough */
+ /* words to get the required number of bytes, and then */
+ /* save the remaining bytes for the next read. */
+
+ /* Determine the number of words to read, rounding up */
+ /* if necessary. */
+ words = ((count + 3) >> 2);
+ bytes_to_read = words << 2;
+
+ if (bytes_to_read > PAGE_SIZE)
+ bytes_to_read = PAGE_SIZE;
+
+ /* Ensure we only read a complete number of words. */
+ bytes_remaining = bytes_to_read & 3;
+ bytes_to_read &= ~3;
+ words = bytes_to_read >> 2;
+
+ status = drvdata->config->get_configuration(drvdata,
+ kbuf, words);
+
+ /* If we didn't read correctly, then bail out. */
+ if (status) {
+ free_page((unsigned long)kbuf);
+ goto error;
+ }
+
+ /* If we fail to return the data to the user, then bail out. */
+ if (copy_to_user(buf, kbuf, bytes_to_read)) {
+ free_page((unsigned long)kbuf);
+ status = -EFAULT;
+ goto error;
+ }
+ memcpy(kbuf, drvdata->read_buffer, bytes_remaining);
+ drvdata->read_buffer_in_use = bytes_remaining;
+ free_page((unsigned long)kbuf);
+ }
+ status = bytes_to_read;
+ error:
+ up(&drvdata->sem);
+ return status;
+}
+
+static ssize_t
+hwicap_write(struct file *file, const char *buf,
+ size_t count, loff_t *ppos)
+{
+ struct hwicap_drvdata *drvdata = file->private_data;
+ ssize_t written = 0;
+ ssize_t left = count;
+ u32 *kbuf;
+ ssize_t len;
+ ssize_t status;
+
+ if (down_interruptible(&drvdata->sem))
+ return -ERESTARTSYS;
+
+ left += drvdata->write_buffer_in_use;
+
+ /* Only write multiples of 4 bytes. */
+ if (left < 4) {
+ status = 0;
+ goto error;
+ }
+
+ kbuf = (u32 *) __get_free_page(GFP_KERNEL);
+ if (!kbuf) {
+ status = -ENOMEM;
+ goto error;
+ }
+
+ while (left > 3) {
+ /* only write multiples of 4 bytes, so there might */
+ /* be as many as 3 bytes left (at the end). */
+ len = left;
+
+ if (len > PAGE_SIZE)
+ len = PAGE_SIZE;
+ len &= ~3;
+
+ if (drvdata->write_buffer_in_use) {
+ memcpy(kbuf, drvdata->write_buffer,
+ drvdata->write_buffer_in_use);
+ if (copy_from_user(
+ (((char *)kbuf) + (drvdata->write_buffer_in_use)),
+ buf + written,
+ len - (drvdata->write_buffer_in_use))) {
+ free_page((unsigned long)kbuf);
+ status = -EFAULT;
+ goto error;
+ }
+ } else {
+ if (copy_from_user(kbuf, buf + written, len)) {
+ free_page((unsigned long)kbuf);
+ status = -EFAULT;
+ goto error;
+ }
+ }
+
+ status = drvdata->config->set_configuration(drvdata,
+ kbuf, len >> 2);
+
+ if (status) {
+ free_page((unsigned long)kbuf);
+ status = -EFAULT;
+ goto error;
+ }
+ if (drvdata->write_buffer_in_use) {
+ len -= drvdata->write_buffer_in_use;
+ left -= drvdata->write_buffer_in_use;
+ drvdata->write_buffer_in_use = 0;
+ }
+ written += len;
+ left -= len;
+ }
+ if ((left > 0) && (left < 4)) {
+ if (!copy_from_user(drvdata->write_buffer,
+ buf + written, left)) {
+ drvdata->write_buffer_in_use = left;
+ written += left;
+ left = 0;
+ }
+ }
+
+ free_page((unsigned long)kbuf);
+ status = written;
+ error:
+ up(&drvdata->sem);
+ return status;
+}
+
+static int hwicap_open(struct inode *inode, struct file *file)
+{
+ struct hwicap_drvdata *drvdata;
+ int status;
+
+ drvdata = container_of(inode->i_cdev, struct hwicap_drvdata, cdev);
+
+ if (down_interruptible(&drvdata->sem))
+ return -ERESTARTSYS;
+
+ if (drvdata->is_open) {
+ status = -EBUSY;
+ goto error;
+ }
+
+ status = hwicap_initialize_hwicap(drvdata);
+ if (status) {
+ dev_err(drvdata->dev, "Failed to open file");
+ goto error;
+ }
+
+ file->private_data = drvdata;
+ drvdata->write_buffer_in_use = 0;
+ drvdata->read_buffer_in_use = 0;
+ drvdata->is_open = 1;
+
+ error:
+ up(&drvdata->sem);
+ return status;
+}
+
+static int hwicap_release(struct inode *inode, struct file *file)
+{
+ struct hwicap_drvdata *drvdata = file->private_data;
+ int i;
+ int status = 0;
+
+ if (down_interruptible(&drvdata->sem))
+ return -ERESTARTSYS;
+
+ if (drvdata->write_buffer_in_use) {
+ /* Flush write buffer. */
+ for (i = drvdata->write_buffer_in_use; i < 4; i++)
+ drvdata->write_buffer[i] = 0;
+
+ status = drvdata->config->set_configuration(drvdata,
+ (u32 *) drvdata->write_buffer, 1);
+ if (status)
+ goto error;
+ }
+
+ status = hwicap_command_desync(drvdata);
+ if (status)
+ goto error;
+
+ error:
+ drvdata->is_open = 0;
+ up(&drvdata->sem);
+ return status;
+}
+
+static struct file_operations hwicap_fops = {
+ .owner = THIS_MODULE,
+ .write = hwicap_write,
+ .read = hwicap_read,
+ .open = hwicap_open,
+ .release = hwicap_release,
+};
+
+static int __devinit hwicap_setup(struct device *dev, int id,
+ const struct resource *regs_res,
+ const struct hwicap_driver_config *config,
+ const struct config_registers *config_regs)
+{
+ dev_t devt;
+ struct hwicap_drvdata *drvdata = NULL;
+ int retval = 0;
+
+ dev_info(dev, "Xilinx icap port driver\n");
+
+ if (id < 0) {
+ for (id = 0; id < HWICAP_DEVICES; id++)
+ if (!probed_devices[id])
+ break;
+ }
+ if (id < 0 || id >= HWICAP_DEVICES) {
+ dev_err(dev, "%s%i too large\n", DRIVER_NAME, id);
+ return -EINVAL;
+ }
+ if (probed_devices[id]) {
+ dev_err(dev, "cannot assign to %s%i; it is already in use\n",
+ DRIVER_NAME, id);
+ return -EBUSY;
+ }
+
+ probed_devices[id] = 1;
+
+ devt = MKDEV(xhwicap_major, xhwicap_minor + id);
+
+ drvdata = kmalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
+ if (!drvdata) {
+ dev_err(dev, "Couldn't allocate device private record\n");
+ return -ENOMEM;
+ }
+ memset((void *)drvdata, 0, sizeof(struct hwicap_drvdata));
+ dev_set_drvdata(dev, (void *)drvdata);
+
+ if (!regs_res) {
+ dev_err(dev, "Couldn't get registers resource\n");
+ retval = -EFAULT;
+ goto failed1;
+ }
+
+ drvdata->mem_start = regs_res->start;
+ drvdata->mem_end = regs_res->end;
+ drvdata->mem_size = regs_res->end - regs_res->start + 1;
+
+ if (!request_mem_region(drvdata->mem_start,
+ drvdata->mem_size, DRIVER_NAME)) {
+ dev_err(dev, "Couldn't lock memory region at %p\n",
+ (void *)regs_res->start);
+ retval = -EBUSY;
+ goto failed1;
+ }
+
+ drvdata->devt = devt;
+ drvdata->dev = dev;
+ drvdata->base_address = ioremap(drvdata->mem_start, drvdata->mem_size);
+ if (!drvdata->base_address) {
+ dev_err(dev, "ioremap() failed\n");
+ goto failed2;
+ }
+
+ drvdata->config = config;
+ drvdata->config_regs = config_regs;
+
+ init_MUTEX(&drvdata->sem);
+ drvdata->is_open = 0;
+
+ dev_info(dev, "ioremap %lx to %p with size %x\n",
+ (unsigned long int)drvdata->mem_start,
+ drvdata->base_address, drvdata->mem_size);
+
+ cdev_init(&drvdata->cdev, &hwicap_fops);
+ drvdata->cdev.owner = THIS_MODULE;
+ retval = cdev_add(&drvdata->cdev, devt, 1);
+ if (retval) {
+ dev_err(dev, "cdev_add() failed\n");
+ goto failed3;
+ }
+ /* devfs_mk_cdev(devt, S_IFCHR|S_IRUGO|S_IWUGO, DRIVER_NAME); */
+ class_device_create(icap_class, NULL, devt, NULL, DRIVER_NAME);
+ return 0; /* success */
+
+ failed3:
+ iounmap(drvdata->base_address);
+
+ failed2:
+ release_mem_region(regs_res->start, drvdata->mem_size);
+
+ failed1:
+ kfree(drvdata);
+
+ return retval;
+}
+
+static struct hwicap_driver_config buffer_icap_config = {
+ .get_configuration = buffer_icap_get_configuration,
+ .set_configuration = buffer_icap_set_configuration,
+ .reset = buffer_icap_reset,
+};
+
+static struct hwicap_driver_config fifo_icap_config = {
+ .get_configuration = fifo_icap_get_configuration,
+ .set_configuration = fifo_icap_set_configuration,
+ .reset = fifo_icap_reset,
+};
+
+static int __devexit hwicap_remove(struct device *dev)
+{
+ struct hwicap_drvdata *drvdata;
+
+ drvdata = (struct hwicap_drvdata *)dev_get_drvdata(dev);
+
+ if (!drvdata)
+ return 0;
+
+ class_device_destroy(icap_class, drvdata->devt);
+ cdev_del(&drvdata->cdev);
+ iounmap(drvdata->base_address);
+ release_mem_region(drvdata->mem_start, drvdata->mem_size);
+ kfree(drvdata);
+ dev_set_drvdata(dev, NULL);
+ probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
+
+ return 0; /* success */
+}
+
+static int __devinit hwicap_drv_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ const struct config_registers *regs;
+ const char *family;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ /* It's most likely that we're using V4, if the family is not
+ specified */
+ regs = &v4_config_registers;
+ family = pdev->dev.platform_data;
+
+ if (family) {
+ if (!strcmp(family, "virtex2p")) {
+ regs = &v2_config_registers;
+ } else if (!strcmp(family, "virtex4")) {
+ regs = &v4_config_registers;
+ } else if (!strcmp(family, "virtex5")) {
+ regs = &v5_config_registers;
+ }
+ }
+
+ return hwicap_setup(&pdev->dev, pdev->id, res,
+ &buffer_icap_config, regs);
+}
+
+static int __devexit hwicap_drv_remove(struct platform_device *pdev)
+{
+ return hwicap_remove(&pdev->dev);
+}
+
+static struct platform_driver hwicap_platform_driver = {
+ .probe = hwicap_drv_probe,
+ .remove = hwicap_drv_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ },
+};
+
+/* ---------------------------------------------------------------------
+ * OF bus binding
+ */
+
+#if defined(CONFIG_OF)
+static int __devinit
+hwicap_of_probe(struct of_device *op, const struct of_device_id *match)
+{
+ struct resource res;
+ const unsigned int *id;
+ const char *family;
+ int rc;
+ const struct hwicap_driver_config *config = match->data;
+ const struct config_registers *regs;
+
+ dev_dbg(&op->dev, "hwicap_of_probe(%p, %p)\n", op, match);
+
+ rc = of_address_to_resource(op->node, 0, &res);
+ if (rc) {
+ dev_err(&op->dev, "invalid address\n");
+ return rc;
+ }
+
+ id = of_get_property(op->node, "port-number", NULL);
+
+ /* It's most likely that we're using V4, if the family is not
+ specified */
+ regs = &v4_config_registers;
+ family = of_get_property(op->node, "xlnx,family", NULL);
+
+ if (family) {
+ if (!strcmp(family, "virtex2p")) {
+ regs = &v2_config_registers;
+ } else if (!strcmp(family, "virtex4")) {
+ regs = &v4_config_registers;
+ } else if (!strcmp(family, "virtex5")) {
+ regs = &v5_config_registers;
+ }
+ }
+ return hwicap_setup(&op->dev, id ? *id : -1, &res, config,
+ regs);
+}
+
+static int __devexit hwicap_of_remove(struct of_device *op)
+{
+ return hwicap_remove(&op->dev);
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id __devinit hwicap_of_match[] = {
+ { .compatible = "xlnx,opb-hwicap-1.00.b", .data = &buffer_icap_config},
+ { .compatible = "xlnx,xps-hwicap-1.00.a", .data = &fifo_icap_config},
+ {},
+};
+MODULE_DEVICE_TABLE(of, hwicap_of_match);
+
+static struct of_platform_driver hwicap_of_driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ .match_table = hwicap_of_match,
+ .probe = hwicap_of_probe,
+ .remove = __devexit_p(hwicap_of_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+/* Registration helpers to keep the number of #ifdefs to a minimum */
+static inline int __devinit hwicap_of_register(void)
+{
+ pr_debug("hwicap: calling of_register_platform_driver()\n");
+ return of_register_platform_driver(&hwicap_of_driver);
+}
+
+static inline void __devexit hwicap_of_unregister(void)
+{
+ of_unregister_platform_driver(&hwicap_of_driver);
+}
+#else /* CONFIG_OF */
+/* CONFIG_OF not enabled; do nothing helpers */
+static inline int __devinit hwicap_of_register(void) { return 0; }
+static inline void __devexit hwicap_of_unregister(void) { }
+#endif /* CONFIG_OF */
+
+static int __devinit hwicap_module_init(void)
+{
+ dev_t devt;
+ int retval;
+
+ icap_class = class_create(THIS_MODULE, "xilinx_config");
+
+ if (xhwicap_major) {
+ devt = MKDEV(xhwicap_major, xhwicap_minor);
+ retval = register_chrdev_region(
+ devt,
+ HWICAP_DEVICES,
+ DRIVER_NAME);
+ if (retval < 0)
+ return retval;
+ } else {
+ retval = alloc_chrdev_region(&devt,
+ xhwicap_minor,
+ HWICAP_DEVICES,
+ DRIVER_NAME);
+ if (retval < 0)
+ return retval;
+ xhwicap_major = MAJOR(devt);
+ }
+
+ retval = platform_driver_register(&hwicap_platform_driver);
+
+ if (retval)
+ goto failed1;
+
+ retval = hwicap_of_register();
+
+ if (retval)
+ goto failed2;
+
+ return retval;
+
+ failed2:
+ platform_driver_unregister(&hwicap_platform_driver);
+
+ failed1:
+ unregister_chrdev_region(devt, HWICAP_DEVICES);
+
+ return retval;
+}
+
+static void __devexit hwicap_module_cleanup(void)
+{
+ dev_t devt = MKDEV(xhwicap_major, xhwicap_minor);
+
+ class_destroy(icap_class);
+
+ platform_driver_unregister(&hwicap_platform_driver);
+
+ hwicap_of_unregister();
+
+ unregister_chrdev_region(devt, HWICAP_DEVICES);
+}
+
+module_init(hwicap_module_init);
+module_exit(hwicap_module_cleanup);
+
+MODULE_AUTHOR("Xilinx, Inc; Xilinx Research Labs Group");
+MODULE_DESCRIPTION("Xilinx ICAP Port Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
new file mode 100644
index 0000000..b6b47d0
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -0,0 +1,193 @@
+/*****************************************************************************
+ *
+ * Author: Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ * AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ * SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
+ * OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ * APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ * THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ * AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ * FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
+ * WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ * IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ * REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE.
+ *
+ * Xilinx products are not intended for use in life support appliances,
+ * devices, or systems. Use in such applications is expressly prohibited.
+ *
+ * (c) Copyright 2003-2007 Xilinx Inc.
+ * All rights reserved.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#ifndef XILINX_HWICAP_H_ /* prevent circular inclusions */
+#define XILINX_HWICAP_H_ /* by using protection macros */
+
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <linux/version.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+struct hwicap_drvdata {
+ u32 write_buffer_in_use; /* Always in [0,3] */
+ u8 write_buffer[4];
+ u32 read_buffer_in_use; /* Always in [0,3] */
+ u8 read_buffer[4];
+ u32 mem_start; /* phys. address of the control registers */
+ u32 mem_end; /* phys. address of the control registers */
+ u32 mem_size;
+ void __iomem *base_address;/* virt. address of the control registers */
+
+ struct device *dev;
+ struct cdev cdev; /* Char device structure */
+ dev_t devt;
+
+ const struct hwicap_driver_config *config;
+ const struct config_registers *config_regs;
+ void *private_data;
+ bool is_open;
+ bool is_accessing;
+};
+
+struct hwicap_driver_config {
+ int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
+ u32 size);
+ int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
+ u32 size);
+ void (*reset)(struct hwicap_drvdata *drvdata);
+};
+
+/* Number of times to poll the done regsiter */
+#define XHI_MAX_RETRIES 10
+
+/************ Constant Definitions *************/
+
+#define XHI_PAD_FRAMES 0x1
+
+/* Mask for calculating configuration packet headers */
+#define XHI_WORD_COUNT_MASK_TYPE_1 0x7FFUL
+#define XHI_WORD_COUNT_MASK_TYPE_2 0x1FFFFFUL
+#define XHI_TYPE_MASK 0x7
+#define XHI_REGISTER_MASK 0xF
+#define XHI_OP_MASK 0x3
+
+#define XHI_TYPE_SHIFT 29
+#define XHI_REGISTER_SHIFT 13
+#define XHI_OP_SHIFT 27
+
+#define XHI_TYPE_1 1
+#define XHI_TYPE_2 2
+#define XHI_OP_WRITE 2
+#define XHI_OP_READ 1
+
+/* Address Block Types */
+#define XHI_FAR_CLB_BLOCK 0
+#define XHI_FAR_BRAM_BLOCK 1
+#define XHI_FAR_BRAM_INT_BLOCK 2
+
+struct config_registers {
+ u32 CRC;
+ u32 FAR;
+ u32 FDRI;
+ u32 FDRO;
+ u32 CMD;
+ u32 CTL;
+ u32 MASK;
+ u32 STAT;
+ u32 LOUT;
+ u32 COR;
+ u32 MFWR;
+ u32 FLR;
+ u32 KEY;
+ u32 CBC;
+ u32 IDCODE;
+ u32 AXSS;
+ u32 C0R_1;
+ u32 CSOB;
+ u32 WBSTAR;
+ u32 TIMER;
+ u32 BOOTSTS;
+ u32 CTL_1;
+};
+
+/* Configuration Commands */
+#define XHI_CMD_NULL 0
+#define XHI_CMD_WCFG 1
+#define XHI_CMD_MFW 2
+#define XHI_CMD_DGHIGH 3
+#define XHI_CMD_RCFG 4
+#define XHI_CMD_START 5
+#define XHI_CMD_RCAP 6
+#define XHI_CMD_RCRC 7
+#define XHI_CMD_AGHIGH 8
+#define XHI_CMD_SWITCH 9
+#define XHI_CMD_GRESTORE 10
+#define XHI_CMD_SHUTDOWN 11
+#define XHI_CMD_GCAPTURE 12
+#define XHI_CMD_DESYNCH 13
+#define XHI_CMD_IPROG 15 /* Only in Virtex5 */
+#define XHI_CMD_CRCC 16 /* Only in Virtex5 */
+#define XHI_CMD_LTIMER 17 /* Only in Virtex5 */
+
+/* Packet constants */
+#define XHI_SYNC_PACKET 0xAA995566UL
+#define XHI_DUMMY_PACKET 0xFFFFFFFFUL
+#define XHI_NOOP_PACKET (XHI_TYPE_1 << XHI_TYPE_SHIFT)
+#define XHI_TYPE_2_READ ((XHI_TYPE_2 << XHI_TYPE_SHIFT) | \
+ (XHI_OP_READ << XHI_OP_SHIFT))
+
+#define XHI_TYPE_2_WRITE ((XHI_TYPE_2 << XHI_TYPE_SHIFT) | \
+ (XHI_OP_WRITE << XHI_OP_SHIFT))
+
+#define XHI_TYPE2_CNT_MASK 0x07FFFFFF
+
+#define XHI_TYPE_1_PACKET_MAX_WORDS 2047UL
+#define XHI_TYPE_1_HEADER_BYTES 4
+#define XHI_TYPE_2_HEADER_BYTES 8
+
+/* Constant to use for CRC check when CRC has been disabled */
+#define XHI_DISABLED_AUTO_CRC 0x0000DEFCUL
+
+/**
+ * hwicap_type_1_read: Generates a Type 1 read packet header.
+ * @parameter: Register is the address of the register to be read back.
+ *
+ * Generates a Type 1 read packet header, which is used to indirectly
+ * read registers in the configuration logic. This packet must then
+ * be sent through the icap device, and a return packet received with
+ * the information.
+ **/
+static inline u32 hwicap_type_1_read(u32 Register)
+{
+ return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
+ (Register << XHI_REGISTER_SHIFT) |
+ (XHI_OP_READ << XHI_OP_SHIFT);
+}
+
+/**
+ * hwicap_type_1_write: Generates a Type 1 write packet header
+ * @parameter: Register is the address of the register to be read back.
+ **/
+static inline u32 hwicap_type_1_write(u32 Register)
+{
+ return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
+ (Register << XHI_REGISTER_SHIFT) |
+ (XHI_OP_WRITE << XHI_OP_SHIFT);
+}
+
+#endif
--
1.5.3.4-dirty
[-- Attachment #2: Type: text/html, Size: 140146 bytes --]
^ permalink raw reply related
* Re: 83xx HDLC Driver Dev - Multiple PHYs?
From: Andy Fleming @ 2008-02-05 0:39 UTC (permalink / raw)
To: rmcguire; +Cc: linuxppc-embedded
In-Reply-To: <000001c862fe$5ff16550$6405a8c0@absolut>
On Jan 29, 2008, at 23:10, Russell McGuire wrote:
>
> All,
>
> I have gotten my HDLC driver up to the point where it can register
> itself
> with the Linux kernel. However now I am faced with a dilemma and style
> question, that is probably best answered by you driver developers
> that have
> more experience.
>
> I am putting support for multiple PHY's into the HDLC driver, but
> after
> converting it to use the of_device tree, and inserting a UCC@5000
> for a
> single UCC HDLC driver, it occurred to me that if I insert more
> devices
> (UCC@6000, UCC@7000, UCC@8000) that the driver will attempt to load
> multiple
> times.
There is already a mechanism to ensure modules aren't loaded again
when a new device is found. Look at the gianfar support again. The
mpc8548 CDS has 4 eTSEC devices and one driver which handles them all
(gianfar). The driver is initialized once. The probe function will
be called for each instance of the device. You need to make sure
your driver's probe function can be called once per device.
>
> Solution 3:
> Have phy-count=4; defined in the driver header, or a module
> parameter, and
> have a single module instance of the driver itself responsible for
> creating
> a single private data structure and setting up multiple UCC's and
> PHY's?
No, please. If the PHYs aren't discoverable, you might need
something like that. But I suspect you just have one PHY per
device. If you have more, how is that configured? Is the hardware
aware of the number of PHYs? Or are you just selecting between
different PHY addresses?
>
> This also feeds into a question on SET_NETDEV_DEV. How does it
> react to
> multiple net devices attached to a single base driver?
SET_NETDEV_DEV declares the base *device* of the net device. The
driver is a separate issue. And it shouldn't be a problem, because
each device instance has its own private structure.
Andy
^ permalink raw reply
* [PATCH v2] Add oprofile support for e300
From: Andy Fleming @ 2008-02-05 0:28 UTC (permalink / raw)
To: linuxppc-dev, galak
The e300 c3 and c4 variants support hardware performance monitor counters which
are identical to those found in the e500.
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
arch/powerpc/kernel/cputable.c | 6 ++++++
arch/powerpc/platforms/Kconfig | 1 +
2 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 98a1c9e..2a8f5cc 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -959,6 +959,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
+ .num_pmcs = 4,
+ .oprofile_cpu_type = "ppc/e300",
+ .oprofile_type = PPC_OPROFILE_FSL_EMB,
.platform = "ppc603",
},
{ /* e300c4 (e300c1, plus one IU) */
@@ -971,6 +974,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
.machine_check = machine_check_generic,
+ .num_pmcs = 4,
+ .oprofile_cpu_type = "ppc/e300",
+ .oprofile_type = PPC_OPROFILE_FSL_EMB,
.platform = "ppc603",
},
{ /* default match, we assume split I/D cache & TB (non-601)... */
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index fdce10c..045b8c8 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -24,6 +24,7 @@ config PPC_83xx
select MPC83xx
select IPIC
select WANT_DEVICE_TREE
+ select FSL_EMB_PERFMON
config PPC_86xx
bool "Freescale 86xx"
--
1.5.0.2.230.gfbe3d-dirty
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox