* Re: 2.6.25-rc3-mm1 ppc64 boot hang
From: Andrew Morton @ 2008-03-05 21:54 UTC (permalink / raw)
To: Badari Pulavarty; +Cc: Matthew Wilcox, linuxppc-dev, linux-kernel
In-Reply-To: <1204752855.7939.42.camel@dyn9047017100.beaverton.ibm.com>
On Wed, 05 Mar 2008 13:34:14 -0800
Badari Pulavarty <pbadari@gmail.com> wrote:
> On Tue, 2008-03-04 at 01:19 -0800, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.25-rc3/2.6.25-rc3-mm1/
> >
>
> Hi Andrew,
>
> Not able to boot 2.6.25-rc3-mm1 my ppc64 box.
> 2.6.25-rc2-mm1 and 2.6.25-rc3 boots fine.
>
> I applied slab.c fix also.
>
> Any other known issues ? My config file attached.
> Here are the messages on the console.
The semaphore consolidation code enables interrupts early in boot, when it
shouldn't. This tends to make powerpc blow up. Could be that this is what
you're hitting.
Matthew, is this ging to be fixed soon?
Thanks.
^ permalink raw reply
* 2.6.25-rc3-mm1 ppc64 boot hang
From: Badari Pulavarty @ 2008-03-05 21:34 UTC (permalink / raw)
To: Andrew Morton; +Cc: linuxppc-dev, lkml
In-Reply-To: <20080304011928.e8c82c0c.akpm@linux-foundation.org>
On Tue, 2008-03-04 at 01:19 -0800, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.25-rc3/2.6.25-rc3-mm1/
>
Hi Andrew,
Not able to boot 2.6.25-rc3-mm1 my ppc64 box.
2.6.25-rc2-mm1 and 2.6.25-rc3 boots fine.
I applied slab.c fix also.
Any other known issues ? My config file attached.
Here are the messages on the console.
Thanks,
Badari
Linux/PowerPC load: root=/dev/sda3 selinux=0 elevator=cfq numa=debug
kernelcore=1024M
Finalizing device tree... using OF tree (promptr=00c39a50)
OF stdout device is: /vdevice/vty@30000000
Hypertas detected, assuming LPAR !
command line: root=/dev/sda3 selinux=0 elevator=cfq numa=debug
kernelcore=1024M
memory layout at init:
alloc_bottom : 00000000023d0000
alloc_top : 0000000008000000
alloc_top_hi : 0000000072000000
rmo_top : 0000000008000000
ram_top : 0000000072000000
Looking for displays
instantiating rtas at 0x00000000077ca000 ... done
0000000000000000 : boot cpu 0000000000000000
0000000000000002 : starting cpu hw idx 0000000000000002... done
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x00000000023d1000 -> 0x00000000023d21cf
Device tree struct 0x00000000023d3000 -> 0x00000000023e0000
Calling quiesce ...
returning from prom_init
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc3-mm1
# Wed Mar 5 10:34:39 2008
#
CONFIG_PPC64=y
#
# Processor support
#
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_64=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_PPC_OF_PLATFORM_PCI is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
# CONFIG_CPUSETS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_CFQ=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_NOOP=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_PPC_PSERIES=y
# CONFIG_PPC_SPLPAR is not set
CONFIG_EEH=y
CONFIG_SCANLOG=y
# CONFIG_LPARCFG is not set
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_MPC512x is not set
# CONFIG_PPC_MPC5121 is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_XICS=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
CONFIG_U3_DART=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_RTAS_PROC=y
# CONFIG_RTAS_FLASH is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_U3_HT_IRQS=y
CONFIG_IBMVIO=y
# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
#
# Kernel options
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_RCU_TRACE=y
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_IOMMU_VMERGE is not set
CONFIG_IOMMU_HELPER=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=y
CONFIG_HOTPLUG_PCI_RPA_DLPAR=y
CONFIG_KERNEL_START=0xc000000000000000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_IBMVSCSI is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_ADB_PMU is not set
# CONFIG_PMAC_SMU is not set
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
# CONFIG_PMAC_RACKMETER is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBMVETH is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_PMACZILOG is not set
# CONFIG_SERIAL_ICOM is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_HVC_DRIVER=y
CONFIG_HVC_CONSOLE=y
# CONFIG_HVC_RTAS is not set
# CONFIG_HVCS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_FB_MATROX_G is not set
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
#
# Layered filesystems
#
CONFIG_UNION_FS=y
CONFIG_UNION_FS_XATTR=y
# CONFIG_UNION_FS_DEBUG is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_HCALL_STATS is not set
# CONFIG_DEBUGGER is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
^ permalink raw reply
* Re: [patch 08/16] mn10300: use generic pci_enable_resources()
From: Greg KH @ 2008-03-05 20:15 UTC (permalink / raw)
To: David Howells
Cc: linux-arch, Chris Zankel, Grant Grundler, linux-parisc,
Matthew Wilcox, Kyle McMartin, linuxppc-dev, Paul Mackerras,
linux-pci, linux-arm-kernel, Russell King, Bjorn Helgaas
In-Reply-To: <28205.1204729990@redhat.com>
On Wed, Mar 05, 2008 at 03:13:10PM +0000, David Howells wrote:
>
> Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
>
> > Use the generic pci_enable_resources() instead of the arch-specific code.
> >
> > Unlike this arch-specific code, the generic version:
> > - checks PCI_NUM_RESOURCES (11), not 6, resources
> > - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
> > - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
> > - checks for resource collisions with "!r->parent"
> >
> > Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
>
> Acked-by: David Howells <dhowells@redhat.com>
added, thanks.
greg k-h
^ permalink raw reply
* Re: [patch 01/16] PCI: add generic pci_enable_resources()
From: Greg KH @ 2008-03-05 20:14 UTC (permalink / raw)
To: David Howells
Cc: linux-arch, Chris Zankel, Grant Grundler, linux-parisc,
Matthew Wilcox, Kyle McMartin, linuxppc-dev, Paul Mackerras,
linux-pci, linux-arm-kernel, Russell King, Bjorn Helgaas
In-Reply-To: <20894.1204728811@redhat.com>
On Wed, Mar 05, 2008 at 02:53:31PM +0000, David Howells wrote:
>
> Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
>
> > Each architecture has its own pcibios_enable_resources() implementation.
> > These differ in many minor ways that have nothing to do with actual
> > architectural differences. Follow-on patches will make most arches
> > use this generic version instead.
> >
> > This version is based on powerpc, which seemed most up-to-date. The only
> > functional difference from the x86 version is that this uses "!r->parent"
> > to check for resource collisions instead of "!r->start && r->end".
> >
> > Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
>
> Acked-by: David Howells <dhowells@redhat.com>
added, thanks.
greg k-h
^ permalink raw reply
* Re: [patch 05/16] frv: use generic pci_enable_resources()
From: Greg KH @ 2008-03-05 20:14 UTC (permalink / raw)
To: David Howells
Cc: linux-arch, Chris Zankel, Grant Grundler, linux-parisc,
Matthew Wilcox, Kyle McMartin, linuxppc-dev, Paul Mackerras,
linux-pci, linux-arm-kernel, Russell King, Bjorn Helgaas
In-Reply-To: <20881.1204728766@redhat.com>
On Wed, Mar 05, 2008 at 02:52:46PM +0000, David Howells wrote:
>
> Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
>
> > Use the generic pci_enable_resources() instead of the arch-specific code.
> >
> > Unlike this arch-specific code, the generic version:
> > - checks PCI_NUM_RESOURCES (11), not 6, resources
> > - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
> > - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
> > - checks for resource collisions with "!r->parent"
> >
> > Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
>
> Acked-by: David Howells <dhowells@redhat.com>
Added, thanks.
greg k-h
^ permalink raw reply
* Re: [patch 09/16] parisc: use generic pci_enable_resources()
From: Greg KH @ 2008-03-05 20:09 UTC (permalink / raw)
To: Kyle McMartin
Cc: linux-arch, Chris Zankel, Grant Grundler, linux-parisc,
Matthew Wilcox, Kyle McMartin, linuxppc-dev, Paul Mackerras,
linux-pci, Russell King, Bjorn Helgaas
In-Reply-To: <20080305161709.GA3354@phobos.i.cabal.ca>
On Wed, Mar 05, 2008 at 11:17:10AM -0500, Kyle McMartin wrote:
> On Tue, Mar 04, 2008 at 11:56:55AM -0700, Bjorn Helgaas wrote:
> > Use the generic pci_enable_resources() instead of the arch-specific code.
> >
> > Unlike this arch-specific code, the generic version:
> > - checks PCI_NUM_RESOURCES (11), not DEVICE_COUNT_RESOURCE (12), resources
> > - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
> > - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
> > - checks for resource collisions with "!r->parent"
> >
> > Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
> >
>
> Acked-by: Kyle McMartin <kyle@mcmartin.ca>
added, thanks.
greg k-h
^ permalink raw reply
* Re: ARCH=ppc -> ARCH=powerpc : help needed for dts file
From: Benjamin Herrenschmidt @ 2008-03-05 20:14 UTC (permalink / raw)
To: Philippe De Muyter; +Cc: Scott Wood, linuxppc-dev
In-Reply-To: <20080305161509.GA7596@netgate.macqel>
On Wed, 2008-03-05 at 17:15 +0100, Philippe De Muyter wrote:
>
> I asked the guy who designed the hardware, and if I understand
> correctly :
>
> - the i/o and memory resources of the pci device are connected to the
> pci bus
> - the interrupts are directly connected to the MPIC
>
> Can I describe that in the dts file ?
Sure, you can describe pretty much any interrupt routing, provided that
we know -how- (ie. where) they are connected. We also need to know the
idsel of the devices. (The later we can deduce from lspci done in
arch/ppc).
Ben.
> Philippe
>
> >
> > Or are you doing some swizzling ?
> >
> > Also, I would need to know how those external IRQs are connected to
> the MPIC,
> > I don't have the spec of that chip here. Hrm. Somebody from
> freescale can
> > help him here ?
> >
> > It's also not clear to me what your interrupts 9 10 and 11 are since
> you
> > seem to only talk about PIRQA...D which is only 4 lines ..
> >
> > So at this stage, that's not enough information. We need to know
> exactly how
> > you have wired things on your board, and somebody from fsl needs to
> tell
> > me how the ExtIrq are routed to the MPIC on that guy.
> >
> > Once that's done, you seem to have grasped the interrupt map... for
> any
> > device or slot, you provide the mapping between idsel/pirq line on
> one side,
> > and mpic interrupt & sense on the other. For PCI, sense is always 1
> for an
> > mpic so you mostly have to check your actual MPIC source numbers.
> >
> > >From your .dts, I see you've been doing some swizzling of slots
> using
> > interrupts 1...4 ... do that correspond to EXTIRQ 5....8 ?
> >
> > Ben.
> >
> > >
> > > /*
> ************************************************************************ */
> > >
> --- ./arch/ppc/platforms/85xx/mpc85xx_ads_common.hbk 2008-01-24
> 22:58:37.000000000 +0000
> > > +++ ./arch/ppc/platforms/85xx/mpc85xx_ads_common.h 2008-02-20
> 16:36:07.000000000 +0000
> > > @@ -29,10 +29,17 @@
> > > extern void mpc85xx_ads_map_io(void) __init;
> > >
> > > /* PCI interrupt controller */
> > > +#ifdef CONFIG_MEIP_8540
> > > +#define PIRQA MPC85xx_IRQ_EXT5
> > > +#define PIRQB MPC85xx_IRQ_EXT6
> > > +#define PIRQC MPC85xx_IRQ_EXT7
> > > +#define PIRQD MPC85xx_IRQ_EXT8
> > > +#else
> > > #define PIRQA MPC85xx_IRQ_EXT1
> > > #define PIRQB MPC85xx_IRQ_EXT2
> > > #define PIRQC MPC85xx_IRQ_EXT3
> > > #define PIRQD MPC85xx_IRQ_EXT4
> > > +#endif
> > >
> > > #define MPC85XX_PCI1_LOWER_IO 0x00000000
> > > #define MPC85XX_PCI1_UPPER_IO 0x00ffffff
>
^ permalink raw reply
* pdflush weirdness
From: Rune Torgersen @ 2008-03-05 19:13 UTC (permalink / raw)
To: linuxppc-dev, linux-kernel
Hi
While trying to find what is causing some hickups on our Freescale 8280
based system=20
(ppc 603e core), i've found that pdflush is causing us some grief.
The system is runnign at 450MHz, have 1GB of memory, and we see the same
issue on 2.6.18 (arch/ppc) and 2.6.24.3 (arch/powerpc)
Filesystem is ext3, but we also see it using ext2. (have not tried any
other=20
fs, but suspect the same result)
Disk is a SATAII Hitachi drive connected to a SiliconImage 3124
controller.
Basically we have a testprogram that (re)writes a 80k file to a random
directory.
There are 50000 target directories.
Directory tree has 5000 top level directories, and 10 direcories under
each one.
Average opens take around 100ms
Average writes take 2ms
Average close/fflush takes mostly 2ms but also a significant number
around 100ms.
Once in a while (sometimes 30seconds sometimes longer) a open or a close
takes 2-3 seconds.
if I disable pdflush (echo 0 > /proc/sys/vm/dirty_writeback_centisecs) I
see no accesses=20
larger than 400 ms, and most writes/closes are 10ms.=20
Opens stay at 100ms (expected as seek time of hd comes into play)
When the pdflush delays occur, the whole system seems to be
unresponsive.
If we have the same number of direcories, but only access a subset of
2-300 of the directories,
we never see this happening. (Max time is then comparable to pdflush
off)
The system is basically a voicemail storage system, and this causes us
problems, as it causes=20
several second long timeouts in processing.
1) Is there any reason that we cannot run with pdflush permanetly
disabled (probably a bad idea...)
2) Are there any thing we can tune to make the system NOT have these
hickups?
I've also been trying to get PREEMPT_RT patches to work on our 2.6.24
kernel, but it blows up when doing the first diskaccess.
(getting a BUG_ON in rtmutex.c, line 691)
^ permalink raw reply
* [PATCH] PowerPC 4xx: Add dcri_clrset() for locked read/modify/write functionality
From: Valentine Barshak @ 2008-03-05 18:38 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <47CEDC6F.6060205@ru.mvista.com>
This adds dcri_clrset() macro which does read/modify/write
on indirect dcr registers while holding indirect dcr lock.
Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
---
include/asm-powerpc/dcr-native.h | 17 +++++++++++++++++
1 files changed, 17 insertions(+)
--- linux-2.6.orig/include/asm-powerpc/dcr-native.h 2008-03-05 17:32:31.000000000 +0300
+++ linux-2.6/include/asm-powerpc/dcr-native.h 2008-03-05 17:53:16.000000000 +0300
@@ -82,6 +82,19 @@ static inline void __mtdcri(int base_add
spin_unlock_irqrestore(&dcr_ind_lock, flags);
}
+static inline void __dcri_clrset(int base_addr, int base_data, int reg,
+ unsigned clr, unsigned set)
+{
+ unsigned long flags;
+ unsigned int val;
+
+ spin_lock_irqsave(&dcr_ind_lock, flags);
+ __mtdcr(base_addr, reg);
+ val = (__mfdcr(base_data) & ~clr) | set;
+ __mtdcr(base_data, val);
+ spin_unlock_irqrestore(&dcr_ind_lock, flags);
+}
+
#define mfdcri(base, reg) __mfdcri(DCRN_ ## base ## _CONFIG_ADDR, \
DCRN_ ## base ## _CONFIG_DATA, \
reg)
@@ -90,6 +103,10 @@ static inline void __mtdcri(int base_add
DCRN_ ## base ## _CONFIG_DATA, \
reg, data)
+#define dcri_clrset(base, reg, clr, set) __dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR, \
+ DCRN_ ## base ## _CONFIG_DATA, \
+ reg, clr, set)
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DCR_NATIVE_H */
^ permalink raw reply
* Re: [Pasemi-linux] [patch 1/6] pasemi_mac: Move RX/TX section enablement to dma_lib
From: Olof Johansson @ 2008-03-05 18:21 UTC (permalink / raw)
To: Michael Ellerman; +Cc: netdev, pasemi-linux, jgarzik, linuxppc-dev
In-Reply-To: <20080226141420.GA22572@lixom.net>
On Tue, Feb 26, 2008 at 08:14:20AM -0600, Olof Johansson wrote:
> Hi,
>
> On Tue, Feb 26, 2008 at 10:46:06PM +1100, Michael Ellerman wrote:
> > On Wed, 2008-02-20 at 20:57 -0600, Olof Johansson wrote:
> > > + i = 1000;
> > > + pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
> > > + while ((i > 0) && (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1))
> > > + i--;
> > > + if (i < 0)
> > > + printk(KERN_INFO "Warning: Could not disable RX section\n");
> > > +
> > > + i = 1000;
> > > + pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
> > > + while ((i > 0) && (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1))
> > > + i--;
> >
> > This kind of caught my eye, is it still going to work when the next core
> > is twice as fast?
>
> Actually, I added the variable right before posting, I used to have an
> infinite loop there while testing the patch. I've never seen it do more
> than a few rounds, so I'm not that worried.
>
> We already have a similar loop in the channel shutdown code, but it runs
> a bit longer. I might bring that over instead. Thanks for pointing it
> out.
FYI; I've commited in this change, rest of the patch is identical.
diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c
index c529d8d..48cb7c9 100644
--- a/arch/powerpc/platforms/pasemi/dma_lib.c
+++ b/arch/powerpc/platforms/pasemi/dma_lib.c
@@ -17,6 +17,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -410,6 +411,7 @@ int pasemi_dma_init(void)
struct resource res;
struct device_node *dn;
int i, intf, err = 0;
+ unsigned long timeout;
u32 tmp;
if (!machine_is(pasemi))
@@ -478,6 +480,34 @@ int pasemi_dma_init(void)
for (i = 0; i < MAX_RXCH; i++)
__set_bit(i, rxch_free);
+ timeout = jiffies + HZ;
+ pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+ while (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1) {
+ if (time_after(jiffies, timeout)) {
+ pr_warning("Warning: Could not disable RX section\n");
+ break;
+ }
+ }
+
+ timeout = jiffies + HZ;
+ pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+ while (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1) {
+ if (time_after(jiffies, timeout)) {
+ pr_warning("Warning: Could not disable TX section\n");
+ break;
+ }
+ }
^ permalink raw reply related
* Re: [RFC][PATCH] ibm_newemac: PowerPC 440EP/440GR EMAC PHY clock workaround
From: Valentine Barshak @ 2008-03-05 17:46 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev
In-Reply-To: <1204185299.15052.381.camel@pasglop>
Benjamin Herrenschmidt wrote:
> On Tue, 2008-02-26 at 09:02 -0600, Josh Boyer wrote:
>> Seems the code will do the right thing since everything is using
>> flags. I suppose my question can be withdrawn. It is slightly
>> confusing to do it that way though. Perhaps a function to do
>> read-modify-writes on DCRs would be welcome. dcr_modify anyone?
>
> Yup, we probably want to expose a dcri_clrset(), though I would also
> expose then __mtdcri/__mfdcri (non locked version) and the spinlock in
> case somebody wants to do something fancy.
I've made a patch which adds dcri_clrset function, but I haven't exposed
the unlocked versions though. I think that dcri_clrset is sufficient for
working with indirect dcr (at least for now, since the most fancy stuff
done with it atm is read/modify/write) and exposing the unlocked version
may lead to its misuse.
I'll submit the patch shortly.
Thanks,
Valentine.
>
> Cheers,
> Ben.
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
^ permalink raw reply
* Re: [PATCH] Fix wrapper platform for adder875, and combine defconfigs.
From: Scott Wood @ 2008-03-05 17:34 UTC (permalink / raw)
To: galak, paulus; +Cc: linuxppc-dev
In-Reply-To: <20080220183338.GA9282@loki.buserror.net>
On Wed, Feb 20, 2008 at 12:33:38PM -0600, Scott Wood wrote:
> This fixes the following bug:
> http://ozlabs.org/pipermail/linuxppc-dev/2008-February/051979.html
Can someone apply this for 2.6.25? Adder875 does not currently build.
-Scott
^ permalink raw reply
* Re: [PATCH 3/4] Emerson KSI8560 device tree
From: Scott Wood @ 2008-03-05 17:31 UTC (permalink / raw)
To: Alexandr Smirnov, linuxppc-dev
In-Reply-To: <20080304232940.GB8399@localhost.localdomain>
On Wed, Mar 05, 2008 at 10:29:40AM +1100, David Gibson wrote:
> On Tue, Mar 04, 2008 at 07:35:40PM +0300, Alexandr Smirnov wrote:
> > + device_type = "network";
> > + model = "TSEC";
> > + compatible = "gianfar";
>
> This still looks like the old binding.
Unfortunately, only the mdio node has a new binding. The gianfar driver
itself (or rather the glue code in fsl_soc.c) still insists on the above.
-Scott
^ permalink raw reply
* [PATCH] Fix kernel panic in arch_arm_kprobe
From: Ionut Nicu @ 2008-03-05 16:12 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Ionut Nicu
The code in arch_arm_kprobe was trying to set a breakpoint which
resulted in a page fault because the kernel text pages were write
protected. Disable the write protect when CONFIG_KPROBES is defined.
Signed-off-by: Ionut Nicu <ionut.nicu@freescale.com>
---
include/asm-powerpc/pgtable-ppc32.h | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index d1332bb..ce66f72 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -428,7 +428,8 @@ extern int icache_44x_need_flush;
#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
+ defined(CONFIG_KPROBES)
/* We want the debuggers to be able to set breakpoints anywhere, so
* don't write protect the kernel text */
#define _PAGE_RAM_TEXT _PAGE_RAM
--
1.5.4.2
^ permalink raw reply related
* Long boot delay with agpgart
From: Wolfgang Pfeiffer @ 2008-03-05 16:33 UTC (permalink / raw)
To: linux-ppc; +Cc: debian-powerpc
Hi All
System: Debian unstable .. many packages very fresh.
Patched 2.6.25-rc3
$ cat /proc/cpuinfo
processor : 0
cpu : 7447A, altivec supported
clock : 833.333000MHz
revision : 0.5 (pvr 8003 0105)
bogomips : 16.57
timebase : 8320000
platform : PowerMac
machine : PowerBook5,8
motherboard : PowerBook5,8 MacRISC3 Power Macintosh
detected as : 287 (PowerBook G4 15")
pmac flags : 00000019
L2 cache : 512K unified
pmac-generation : NewWorld
I'm not sure this is something that should be reported to
linuxppc-dev@ozlabs.org, but as I'm using a fresh patched git kernel
(please see
http://patchwork.ozlabs.org/linuxppc/patch?order=state&id=17107
for more on that) that I even uploaded for others to use, I thought it
might be a sane idea to post it here also.
Also the problem reported here only happened once: but this whole
thing was looking so ugly I thought it might be better to ask people
knowing more than I do ..
Here's what happened:
After upgrading quite a few packages today, I rebooted the machine:
The boot process began being stuck the moment some agpgart init
routine started:
Excerpt from kern.log that moment:
[ 6.882357] usbcore: registered new device driver usb
[ 36.732011] uninorth_agp: gave up waiting for init of module agpgart.
[ 36.733009] uninorth_agp: Unknown symbol agp_bridge
[ 66.734008] uninorth_agp: gave up waiting for init of module agpgart.
[ 66.735011] uninorth_agp: Unknown symbol agp_find_bridge
[ 96.736009] uninorth_agp: gave up waiting for init of module agpgart.
[ 96.737010] uninorth_agp: Unknown symbol agp_device_command
The whole log for that time, and a successful reboot some time later,
is here:
http://geocities.com/wolfgangpfeiffer/kern.log.txt
The boot routine got stuck for maybe 4 or 7 minutes with that agpgart
problem.
In the end the system/machine seemed to be booting cleanly. I then
rebooted again with a different kernel (some 2.6.18, IIRC) - just to
check what's up, with no problems I were aware of. I then repeatedly
rebooted the machine with 2.6.25-rc3 where the first boot blocking
happened, again with no problems.
The kernel this happened with is a patched git version: 2.6.25-rc3 -
please see the patchwork.ozlabs.org URL above for more on that.
My question:
*** 1:
Does this smell like some hardware bug?
*** 2:
Is it harmless? - I don't remember a problem like that has happened
to me over the last years ... or at least not over the last 2 years,
or so ..
*** 3:
Your guesses?
And following a list of the packages I upgraded today (for those not
being familiar with Debian: just ignore the ".list" suffix at the end
at the end of the package names, please ...)
Mar 5 13:13 transcode-doc.list
Mar 5 13:13 sendmail-doc.list
Mar 5 13:13 sendmail.list
Mar 5 13:13 sensible-mda.list
Mar 5 13:13 sendmail-base.list
Mar 5 13:13 sendmail-cf.list
Mar 5 13:13 rt2500-source.list
Mar 5 13:12 nmap.list
Mar 5 13:12 pvm.list
Mar 5 13:12 mplayer-doc.list
Mar 5 13:12 lsb-release.list
Mar 5 13:12 hddtemp.list
Mar 5 13:12 libconfig-inifiles-perl.list
Mar 5 13:12 libpvm3.list
Mar 5 13:12 lm-sensors.list
Mar 5 13:12 bluez-hcidump.list
Mar 5 13:12 dcraw.list
Mar 5 13:12 gs-esp.list
Mar 5 13:12 gs-gpl.list
Mar 5 13:12 ytalk.list
Mar 5 13:12 ktalkd.list
Mar 5 13:12 xorg.list
Mar 5 13:12 xserver-xorg-dev.list
Mar 5 13:12 xlibs-data.list
Mar 5 13:12 xterm.list
Mar 5 13:12 xchm.list
Mar 5 13:12 xli.list
Mar 5 13:12 x-ttcidfont-conf.list
Mar 5 13:12 xutils.list
Mar 5 13:12 ttf-opensymbol.list
Mar 5 13:12 type-handling.list
Mar 5 13:12 unrar-free.list
Mar 5 13:12 unrar.list
Mar 5 13:12 ttf-dejavu-core.list
Mar 5 13:12 ttf-dejavu-extra.list
Mar 5 13:12 ttf-dejavu.list
Mar 5 13:12 ttf-bengali-fonts.list
Mar 5 13:12 ttf-tamil-fonts.list
Mar 5 13:12 ttf-telugu-fonts.list
Mar 5 13:12 ttf-kannada-fonts.list
Mar 5 13:12 ttf-malayalam-fonts.list
Mar 5 13:12 ttf-oriya-fonts.list
Mar 5 13:12 ttf-punjabi-fonts.list
Mar 5 13:12 ttf-devanagari-fonts.list
Mar 5 13:12 ttf-gujarati-fonts.list
Mar 5 13:12 ttf-baekmuk.list
Mar 5 13:12 ttf-indic-fonts.list
Mar 5 13:12 tcpdump.list
Mar 5 13:12 tk8.4.list
Mar 5 13:12 tcl8.4.list
Mar 5 13:12 sudo.list
Mar 5 13:12 t1utils.list
Mar 5 13:12 streamripper.list
Mar 5 13:12 sbcl.list
Mar 5 13:12 smartmontools.list
Mar 5 13:12 ssl-cert.list
Mar 5 13:12 rsync.list
Mar 5 13:12 sane-utils.list
Mar 5 13:12 python-gnome2.list
Mar 5 13:12 python-libxml2.list
Mar 5 13:12 rcs.list
Mar 5 13:12 python-gtk2.list
Mar 5 13:12 python-glade2.list
Mar 5 13:12 python-numeric.list
Mar 5 13:12 python-gobject.list
Mar 5 13:12 python-cairo.list
Mar 5 13:12 psfontmgr.list
Mar 5 13:12 privoxy.list
Mar 5 13:12 powernowd.list
Mar 5 13:12 po-debconf.list
Mar 5 13:12 powermgmt-base.list
Mar 5 13:12 perl-tk.list
Mar 5 13:12 pmount.list
Mar 5 13:12 p7zip-full.list
Mar 5 13:12 openoffice.org-thesaurus-en-us.list
Mar 5 13:12 openoffice.org-filter-mobiledev.list
Mar 5 13:12 openoffice.org-java-common.list
Mar 5 13:12 ntpdate.list
Mar 5 13:12 ocrad.list
Mar 5 13:12 noatun-plugins.list
Mar 5 13:12 noatun.list
Mar 5 13:11 netpbm.list
Mar 5 13:11 networkstatus.list
Mar 5 13:11 nfs-kernel-server.list
Mar 5 13:11 myspell-en-us.list
Mar 5 13:11 ncompress.list
Mar 5 13:11 mpeg2dec.list
Mar 5 13:11 mpeg4ip-utils.list
Mar 5 13:11 myspell-de-de.list
Mar 5 13:11 mesa-utils.list
Mar 5 13:11 mjpegtools.list
Mar 5 13:11 module-assistant.list
Mar 5 13:11 menu.list
Mar 5 13:11 mc.list
Mar 5 13:11 manpages-dev.list
Mar 5 13:11 lisa.list
Mar 5 13:11 locate.list
Mar 5 13:11 libxmuu-dev.list
Mar 5 13:11 libxmuu1.list
Mar 5 13:11 libxosd2.list
Mar 5 13:11 libxalan2-java.list
Mar 5 13:11 libxfont1.list
Mar 5 13:11 libxmlsec1-openssl.list
Mar 5 13:11 libxmlsec1.list
Mar 5 13:11 libwpg-0.1-1.list
Mar 5 13:11 libwps-0.1-1.list
Mar 5 13:11 libxerces2-java.list
Mar 5 13:11 libvlc0.list
Mar 5 13:11 libwnck-common.list
Mar 5 13:11 libwnck22.list
Mar 5 13:11 libwpd8c2a.list
Mar 5 13:11 libt1-5.list
Mar 5 13:11 libtextwrap1.list
Mar 5 13:11 libtool.list
Mar 5 13:11 libswscalecvs0.list
Mar 5 13:11 libsensors4.list
Mar 5 13:11 libservlet2.4-java.list
Mar 5 13:11 libsox0.list
Mar 5 13:11 libpulse-browse0.list
Mar 5 13:11 libpulse0.list
Mar 5 13:11 libsdl-mixer1.2.list
Mar 5 13:11 libpcsclite1.list
Mar 5 13:11 libpoppler-glib2.list
Mar 5 13:11 libpostproccvs51.list
Mar 5 13:11 libpulse-dev.list
Mar 5 13:11 libpulse-mainloop-glib0.list
Mar 5 13:11 pcscd.list
Mar 5 13:11 libccid.list
Mar 5 13:11 libopensync0.list
Mar 5 13:11 libpam-gnome-keyring.list
Mar 5 13:11 libnspr4-0d.list
Mar 5 13:11 libnss-db.list
Mar 5 13:11 libsqlite3-0.list
Mar 5 13:11 libmpeg4ip-0.list
Mar 5 13:11 libmx4j-java.list
Mar 5 13:11 libnetpbm10.list
Mar 5 13:11 libmpeg2-4.list
Mar 5 13:11 libmjpegtools0.list
Mar 5 13:11 libmp4v2-0.list
Mar 5 13:11 libmailtools-perl.list
Mar 5 13:11 ocaml-base-nox.list
Mar 5 13:11 liblog4j1.2-java-gcj.list
Mar 5 13:11 liblogfile-rotate-perl.list
Mar 5 13:11 libltdl3.list
Mar 5 13:11 libmad-ocaml.list
Mar 5 13:11 libk3b3.list
Mar 5 13:11 libkdcraw2.list
Mar 5 13:11 liblog4j1.2-java.list
Mar 5 13:11 libintl-perl.list
Mar 5 13:11 libio-compress-base-perl.list
Mar 5 13:11 libiso9660-5.list
Mar 5 13:11 libjline-java.list
Mar 5 13:11 libical0.list
Mar 5 13:11 libieee1284-3.list
Mar 5 13:11 libgutenprintui2-1.list
Mar 5 13:11 libgtk2-perl.list
Mar 5 13:11 libgtkspell0.list
Mar 5 13:11 libgnomevfs2-common.list
Mar 5 13:11 shared-mime-info.list
Mar 5 13:11 libglu1-xorg-dev.list
Mar 5 13:11 libglu1-xorg.list
Mar 5 13:11 libgmp3c2.list
Mar 5 13:11 libglib2.0-data.list
Mar 5 13:11 libgksu2-0.list
Mar 5 13:11 libgtop2-7.list
Mar 5 13:11 libgtop2-common.list
Mar 5 13:11 xbase-clients.list
Mar 5 13:11 libgcj8-jar.list
Mar 5 13:11 libgimp2.0.list
Mar 5 13:11 libgcj7-jar.list
Mar 5 13:11 libexif12.list
Mar 5 13:11 libexif-dev.list
Mar 5 13:11 libevent-rpc-perl.list
Mar 5 13:11 libecj-java.list
Mar 5 13:11 libenchant1c2a.list
Mar 5 13:11 libevent-perl.list
Mar 5 13:11 libglib-perl.list
Mar 5 13:11 libcurses-ui-perl.list
Mar 5 13:11 libdb4.6++.list
Mar 5 13:11 libdvdread-dev.list
Mar 5 13:11 libdvdread3.list
Mar 5 13:10 libcommons-cli-java.list
Mar 5 13:10 libcompress-raw-zlib-perl.list
Mar 5 13:10 libconfig-file-perl.list
Mar 5 13:10 libcurses-perl.list
Mar 5 13:10 libchm1.list
Mar 5 13:10 libcommons-lang-java.list
Mar 5 13:10 libcdio7.list
Mar 5 13:10 libcairo-perl.list
Mar 5 13:10 libcucul-dev.list
Mar 5 13:10 libcaca-dev.list
Mar 5 13:10 libcaca0.list
Mar 5 13:10 libbonoboui2-0.list
Mar 5 13:10 libbonoboui2-common.list
Mar 5 13:10 libcucul0.list
Mar 5 13:10 libbonobo2-common.list
Mar 5 13:10 libbonobo2-0.list
Mar 5 13:10 libarts1-xine.list
Mar 5 13:10 libavahi-glib1.list
Mar 5 13:10 libavutilcvs49.list
Mar 5 13:10 libarts1-mpeglib.list
Mar 5 13:10 mpeglib.list
Mar 5 13:10 libaa1-dev.list
Mar 5 13:10 libarts1-akode.list
Mar 5 13:10 libarts1-audiofile.list
Mar 5 13:10 ktip.list
Mar 5 13:10 libaa1.list
Mar 5 13:10 ksysguard.list
Mar 5 13:10 ksysguardd.list
Mar 5 13:10 libavahi-compat-libdnssd1.list
Mar 5 13:10 libsensors3.list
Mar 5 13:10 ksvg.list
Mar 5 13:10 liblcms1-dev.list
Mar 5 13:10 liblcms1.list
Mar 5 13:10 ksplash.list
Mar 5 13:10 ksnapshot.list
Mar 5 13:10 kscreensaver-xsavers.list
Mar 5 13:10 ksig.list
Mar 5 13:10 krec.list
Mar 5 13:10 kscd.list
Mar 5 13:10 kpdf.list
Mar 5 13:10 kpersonalizer.list
Mar 5 13:10 kpager.list
Mar 5 13:10 kooka.list
Mar 5 13:10 libkscan1.list
Mar 5 13:10 konq-plugins.list
Mar 5 13:10 konsole.list
Mar 5 13:10 knewsticker-scripts.list
Mar 5 13:10 knotes.list
Mar 5 13:10 libfinance-quote-perl.list
Mar 5 13:10 kmix.list
Mar 5 13:10 libhtml-tableextract-perl.list
Mar 5 13:10 libwww-perl.list
Mar 5 13:10 kmenuedit.list
Mar 5 13:10 kmid.list
Mar 5 13:10 kmailcvt.list
Mar 5 13:10 kmail.list
Mar 5 13:10 libksieve0.list
Mar 5 13:10 libmimelib1c2a.list
Mar 5 13:10 klipper.list
Mar 5 13:10 libkmime2.list
Mar 5 13:10 libkpimidentities1.list
Mar 5 13:10 khelpcenter.list
Mar 5 13:10 kicker-applets.list
Mar 5 13:10 gs.list
Mar 5 13:10 kdeprint.list
Mar 5 13:10 kghostview.list
Mar 5 13:10 kdepasswd.list
Mar 5 13:10 libkonq4.list
Mar 5 13:10 kdenetwork-filesharing.list
Mar 5 13:10 kdenetwork.list
Mar 5 13:10 kwifimanager.list
Mar 5 13:10 ksirc.list
Mar 5 13:10 krdc.list
Mar 5 13:10 krfb.list
Mar 5 13:10 libslp1.list
Mar 5 13:10 kpf.list
Mar 5 13:10 kppp.list
Mar 5 13:10 kopete.list
Mar 5 13:10 kdict.list
Mar 5 13:10 kdnssd.list
Mar 5 13:10 kget.list
Mar 5 13:10 knewsticker.list
Mar 5 13:10 kdemultimedia-kfile-plugins.list
Mar 5 13:10 kdenetwork-kfile-plugins.list
Mar 5 13:10 kdemultimedia-kappfinder-data.list
Mar 5 13:10 libtheora-dev.list
Mar 5 13:10 libtheora0.list
Mar 5 13:10 kdemultimedia-doc-html.list
Mar 5 13:10 kdebluetooth.list
Mar 5 13:10 kdegraphics-kfile-plugins.list
Mar 5 13:10 libpoppler-qt2.list
Mar 5 13:10 libpoppler2.list
Mar 5 13:10 python-dbus.list
Mar 5 13:10 python-qt4-dbus.list
Mar 5 13:10 python-qt4.list
Mar 5 13:09 python2.4-minimal.list
Mar 5 13:09 python2.4.list
Mar 5 13:09 python-qt4-common.list
Mar 5 13:09 python-sip4.list
Mar 5 13:09 libqt4-core.list
Mar 5 13:09 libqt4-gui.list
Mar 5 13:09 kdeartwork.list
Mar 5 13:09 kdebase-bin-kde3.list
Mar 5 13:09 kscreensaver.list
Mar 5 13:09 libkbluetooth0.list
Mar 5 13:09 kdeartwork-theme-window.list
Mar 5 13:09 kdewallpapers.list
Mar 5 13:09 ksmserver.list
Mar 5 13:09 kwin.list
Mar 5 13:09 kdeartwork-theme-icon.list
Mar 5 13:09 kdeartwork-misc.list
Mar 5 13:09 kdeartwork-style.list
Mar 5 13:09 kdeaddons-kfile-plugins.list
Mar 5 13:09 kdeartwork-emoticons.list
Mar 5 13:09 kdemultimedia-kio-plugins.list
Mar 5 13:09 kaudiocreator.list
Mar 5 13:09 libkcddb1.list
Mar 5 13:09 kate-plugins.list
Mar 5 13:09 libtidy-0.99-0.list
Mar 5 13:09 tidy.list
Mar 5 13:09 kappfinder.list
Mar 5 13:09 kate.list
Mar 5 13:09 kaddressbook-plugins.list
Mar 5 13:09 kamera.list
Mar 5 13:09 kaddressbook.list
Mar 5 13:09 libkleopatra1.list
Mar 5 13:09 kaboodle.list
Mar 5 13:09 libgpgme11.list
Mar 5 13:09 libpth20.list
Mar 5 13:09 john.list
Mar 5 13:09 juk.list
Mar 5 13:09 libakode2.list
Mar 5 13:09 initramfs-tools.list
Mar 5 13:09 installation-report.list
Mar 5 13:09 java-package.list
Mar 5 13:09 httping.list
Mar 5 13:09 klibc-utils.list
Mar 5 13:09 libklibc.list
Mar 5 13:09 htdig.list
Mar 5 13:09 hal.list
Mar 5 13:09 hdparm.list
Mar 5 13:09 hspell.list
Mar 5 13:09 lockfile-progs.list
Mar 5 13:09 usbutils.list
Mar 5 13:09 gutenprint-doc.list
Mar 5 13:09 gutenprint-locales.list
Mar 5 13:09 gstreamer0.10-alsa.list
Mar 5 13:09 gtkpbbuttons-common.list
Mar 5 13:09 gtkpbbuttons.list
Mar 5 13:09 gpm.list
Mar 5 13:09 libgstreamer-plugins-base0.10-0.list
Mar 5 13:09 libgstreamer0.10-0.list
Mar 5 13:09 gnome-keyring.list
Mar 5 13:09 libhal-storage1.list
Mar 5 13:09 git-doc.list
Mar 5 13:09 libgnome-keyring0.list
Mar 5 13:09 gimp-help-common.list
Mar 5 13:09 gimp-help-en.list
Mar 5 13:08 ghostscript.list
Mar 5 13:08 gsfonts.list
Mar 5 13:08 ghostscript-x.list
Mar 5 13:08 gv.list
Mar 5 13:08 gettext.list
Mar 5 13:08 gdb.list
Mar 5 13:08 gcj-4.2-base.list
Mar 5 13:08 libgcj8-1.list
Mar 5 13:08 gij-4.2.list
Mar 5 13:08 libgcj8-1-awt.list
Mar 5 13:08 g++.list
Mar 5 13:08 gaim-data.list
Mar 5 13:08 gaim.list
Mar 5 13:08 gcc.list
Mar 5 13:08 fvwm.list
Mar 5 13:08 librsvg2-2.list
Mar 5 13:08 fping.list
Mar 5 13:08 libfribidi-dev.list
Mar 5 13:08 libfribidi0.list
Mar 5 13:08 librsvg2-common.list
Mar 5 13:08 fortune-mod.list
Mar 5 13:08 fortunes-off.list
Mar 5 13:08 fortunes.list
Mar 5 13:08 fam.list
Mar 5 13:08 fetchmail.list
Mar 5 13:08 fortunes-min.list
Mar 5 13:08 faad.list
Mar 5 13:08 fakeroot.list
Mar 5 13:08 libfaad-dev.list
Mar 5 13:08 libfaad0.list
Mar 5 13:08 escputil.list
Mar 5 13:08 emacs21-common.list
Mar 5 13:07 emacs21-bin-common.list
Mar 5 13:07 emacs21.list
Mar 5 13:07 dselect.list
Mar 5 13:07 dvd+rw-tools.list
Mar 5 13:07 em8300-headers.list
Mar 5 13:07 docbook-xsl.list
Mar 5 13:07 dpatch.list
Mar 5 13:07 doc-base.list
Mar 5 13:07 scrollkeeper.list
Mar 5 13:07 discover1.list
Mar 5 13:07 libscrollkeeper0.list
Mar 5 13:07 discover1-data.list
Mar 5 13:07 libdiscover1.list
Mar 5 13:07 dcoprss.list
Mar 5 13:07 dict.list
Mar 5 13:07 librss1.list
Mar 5 13:07 cvs.list
Mar 5 13:07 dbus-x11.list
Mar 5 13:07 cupsys-driver-gutenprint.list
Mar 5 13:07 cupsys-bsd.list
Mar 5 13:07 cupsys-client.list
Mar 5 13:07 libgutenprint2.list
Mar 5 13:07 cupsys-common.list
Mar 5 13:07 cpufrequtils.list
Mar 5 13:07 libcpufreq0.list
Mar 5 13:07 libsysfs-dev.list
Mar 5 13:07 libsysfs2.list
Mar 5 13:07 cpp-4.1.list
Mar 5 13:07 gcc-4.1-base.list
Mar 5 13:07 gcc-4.1.list
Mar 5 13:07 libstdc++6-4.1-dev.list
Mar 5 13:07 clamav-base.list
Mar 5 13:07 g++-4.1.list
Mar 5 13:07 libmudflap0-dev.list
Mar 5 13:07 cl-binary-types.list
Mar 5 13:07 cl-kmrcl.list
Mar 5 13:07 cl-rt.list
Mar 5 13:07 cl-asdf.list
Mar 5 13:07 common-lisp-controller.list
Mar 5 13:07 cjk-latex.list
Mar 5 13:07 latex-cjk-common.list
Mar 5 13:07 realpath.list
Mar 5 13:07 cdrdao.list
Mar 5 13:07 cdparanoia.list
Mar 5 13:07 libao2.list
Mar 5 13:07 libcdparanoia0-dev.list
Mar 5 13:07 libcdparanoia0.list
Mar 5 13:07 ca-certificates.list
Mar 5 13:07 ccache.list
Mar 5 13:07 openssl.list
Mar 5 13:07 bluez-gnome.list
Mar 5 13:07 libidl0.list
Mar 5 13:07 liborbit2.list
Mar 5 13:07 gconf2.list
Mar 5 13:07 libhal1.list
Mar 5 13:07 psmisc.list
Mar 5 13:07 gconf2-common.list
Mar 5 13:07 bluetooth.list
Mar 5 13:07 bluez-utils.list
Mar 5 13:07 libbluetooth2.list
Mar 5 13:07 binutils.list
Mar 5 13:07 bash-doc.list
Mar 5 13:07 bcm43xx-fwcutter.list
Mar 5 13:07 avahi-daemon.list
Mar 5 13:07 avahi-utils.list
Mar 5 13:07 libavahi-core5.list
Mar 5 13:07 libdaemon0.list
Mar 5 13:07 dbus.list
Mar 5 13:07 autoconf.list
Mar 5 13:07 autotools-dev.list
Mar 5 13:07 audacity.list
Mar 5 13:07 libwxgtk2.6-0.list
Mar 5 13:07 libflac++6.list
Mar 5 13:07 libwxbase2.6-0.list
Mar 5 13:06 ascii.list
Mar 5 13:06 aspell-de.list
Mar 5 13:06 atlantikdesigner.list
Mar 5 13:06 artsbuilder.list
Mar 5 13:06 armagetron.list
Mar 5 13:06 armagetronad-common.list
Mar 5 13:06 libsdl-image1.2.list
Mar 5 13:06 aptitude-doc-en.list
Mar 5 13:06 arj.list
Mar 5 13:06 armagetronad.list
Mar 5 13:06 apt-listchanges.conffiles
Mar 5 13:06 apt-listchanges.config
Mar 5 13:06 apt-listchanges.list
Mar 5 13:06 apt-listchanges.md5sums
Mar 5 13:06 apt-listchanges.postinst
Mar 5 13:06 apt-listchanges.postrm
Mar 5 13:06 apt-listchanges.preinst
Mar 5 13:06 apt-listchanges.prerm
Mar 5 13:06 apt-listchanges.templates
Mar 5 13:06 apt-spy.list
Mar 5 13:06 apt-listbugs.conffiles
Mar 5 13:06 apt-listbugs.list
Mar 5 13:06 apt-listbugs.md5sums
Mar 5 13:06 apt-listbugs.postinst
Mar 5 13:06 apt-listbugs.postrm
Mar 5 13:06 apt-listbugs.preinst
Mar 5 13:06 liblocale-ruby1.8.list
Mar 5 13:06 libxml-parser-ruby1.8.list
Mar 5 13:06 ruby.list
Mar 5 13:06 ruby1.8.list
Mar 5 13:06 libruby1.8.list
Mar 5 13:06 apt-doc.list
Mar 5 13:06 antlr.list
Mar 5 13:06 libgcj7-1.list
Mar 5 13:06 libgcj-common.list
Mar 5 13:06 libgcj7-1-awt.list
Mar 5 13:06 gcj-4.1-base.list
Mar 5 13:06 gij-4.1.list
Mar 5 13:06 alsaplayer-common.list
Mar 5 13:06 libflac8.list
Mar 5 13:06 alsaplayer-gtk.list
Mar 5 13:06 libpango1.0-0.list
Mar 5 13:06 libthai-data.list
Mar 5 13:06 libthai0.list
Mar 5 13:06 libpango1.0-common.list
Mar 5 13:06 defoma.list
Mar 5 13:06 libdatrie0.list
Mar 5 13:06 libpango1.0-dev.list
Mar 5 13:06 alsaplayer-alsa.list
Mar 5 13:06 libcairo2-dev.list
Mar 5 13:06 libcairo2.list
Mar 5 13:06 alsa-utils.list
Mar 5 13:06 akregator.list
Mar 5 13:06 alsa-base.list
Mar 5 13:06 linux-sound-base.list
Mar 5 13:06 libkcal2b.list
Mar 5 13:06 libkdepim1a.list
Mar 5 13:06 kdelibs-data.list
Mar 5 13:06 libktnef1.list
Mar 5 13:06 kdelibs4c2a.list
Mar 5 13:06 kdelibs4-dev.list
Mar 5 13:06 libavahi-qt3-1.list
Mar 5 13:06 libavahi-qt3-dev.list
Mar 5 13:06 libfam-dev.list
Mar 5 13:06 libfam0.list
Mar 5 13:06 libxml2-utils.list
Mar 5 13:06 libavahi-client-dev.list
Mar 5 13:06 libavahi-client3.list
Mar 5 13:06 libdbus-1-3.list
Mar 5 13:06 libdbus-1-dev.list
Mar 5 13:06 libavahi-common-data.list
Mar 5 13:06 libavahi-common-dev.list
Mar 5 13:06 libavahi-common3.list
Mar 5 13:06 aspell.list
Mar 5 13:06 libaspell-dev.list
Mar 5 13:06 libaspell15.list
Mar 5 13:06 libarts1c2a.list
Mar 5 13:06 libjack0.100.0-dev.list
Mar 5 13:06 libvorbis0a.list
Mar 5 13:06 libogg0.list
Mar 5 13:06 libvorbis-dev.list
Mar 5 13:06 libvorbisenc2.list
Mar 5 13:06 libvorbisfile3.list
Mar 5 13:06 libogg-dev.list
Mar 5 13:06 libqt3-mt.list
Mar 5 13:06 qt3-dev-tools.list
Mar 5 13:06 libqt3-headers.list
Mar 5 13:06 libxmu-dev.list
Mar 5 13:06 libxmu6.list
Mar 5 13:06 libglu1-mesa-dev.list
Mar 5 13:06 libglu1-mesa.list
Mar 5 13:06 libqt3-compat-headers.list
Mar 5 13:06 libqt3-mt-dev.list
Mar 5 13:05 libgl1-mesa-dev.list
Mar 5 13:05 libgl1-mesa-dri.list
Mar 5 13:05 libgl1-mesa-glx.list
Mar 5 13:05 mesa-common-dev.list
Mar 5 13:05 libaudio-dev.list
Mar 5 13:05 libfreebob0.list
Mar 5 13:05 libraw1394-8.list
Mar 5 13:05 libraw1394-dev.list
Mar 5 13:05 jackd.list
Mar 5 13:05 libjack0.list
Mar 5 13:05 libjack-dev.list
Mar 5 13:05 libasound2-dev.list
Mar 5 13:05 libasound2.list
Mar 5 13:05 libaudio2.list
Mar 5 13:05 libarts1-dev.list
Mar 5 13:05 libartsc0-dev.list
Mar 5 13:05 libartsc0.list
Mar 5 13:05 libglib2.0-0.list
Mar 5 13:05 libglib2.0-dev.list
Mar 5 13:05 libart-2.0-2.list
Mar 5 13:05 libart-2.0-dev.list
Mar 5 13:05 abook.list
Mar 5 13:05 texinfo.list
Mar 5 13:05 python-support.list
Mar 5 13:05 strace.list
Mar 5 13:05 openssh-client.list
Mar 5 13:05 pciutils.list
Mar 5 13:05 python-central.list
Mar 5 13:05 openssh-server.list
Mar 5 13:05 nfs-common.list
Mar 5 13:05 portmap.list
Mar 5 13:05 ncurses-term.list
Mar 5 13:05 mime-support.list
Mar 5 13:05 mutt.list
Mar 5 13:05 lsof.list
Mar 5 13:05 locales.list
Mar 5 13:05 libpcre3.list
Mar 5 13:05 libidn11-dev.list
Mar 5 13:05 libidn11.list
Mar 5 13:05 libpcre3-dev.list
Mar 5 13:05 libpcrecpp0.list
Mar 5 13:05 gettext-base.list
Mar 5 13:05 less.list
Mar 5 13:05 libgpmg1.list
Mar 5 13:05 file.list
Mar 5 13:05 libmagic1.list
Mar 5 13:05 doc-linux-text.list
Mar 5 13:05 dictionaries-common.list
Mar 5 13:05 dnsutils.list
Mar 5 13:05 bind9-host.list
Mar 5 13:05 libbind9-30.list
Mar 5 13:05 liblwres30.list
Mar 5 13:05 libdns32.list
Mar 5 13:05 libisc32.list
Mar 5 13:05 libisccc30.list
Mar 5 13:05 libisccfg30.list
Mar 5 13:05 at.list
Mar 5 13:05 makedev.list
Mar 5 13:05 procps.list
Mar 5 13:05 libattr1-dev.list
Mar 5 13:05 libattr1.list
Mar 5 13:05 update-inetd.list
Mar 5 13:05 traceroute.list
Mar 5 13:05 tasksel.list
Mar 5 13:05 manpages.list
Mar 5 13:05 nano.list
Mar 5 13:05 tasksel-data.list
Mar 5 13:05 man-db.list
Mar 5 13:05 libusb-0.1-4.list
Mar 5 13:05 libusb-dev.list
Mar 5 13:05 libsasl2-2.list
Mar 5 13:05 libtasn1-3-dev.list
Mar 5 13:05 libtasn1-3.list
Mar 5 13:05 libdb4.6.list
Mar 5 13:05 libsasl2-modules.list
Mar 5 13:05 libssl-dev.list
Mar 5 13:05 libssl0.9.8.list
Mar 5 13:05 libsasl2-dev.list
Mar 5 13:05 libgcrypt11.list
Mar 5 13:05 libncursesw5.list
Mar 5 13:05 bzip2.list
Mar 5 13:05 libbz2-1.0.list
Mar 5 13:05 libgcrypt11-dev.list
Mar 5 13:05 iptables.list
Mar 5 13:05 iputils-ping.list
Mar 5 13:05 klogd.list
Mar 5 13:05 laptop-detect.list
Mar 5 13:05 libbz2-dev.list
Mar 5 13:05 sysklogd.list
Mar 5 13:05 info.list
Mar 5 13:05 cron.list
Mar 5 13:05 gpgv.list
Mar 5 13:05 groff-base.list
Mar 5 13:05 adduser.list
Mar 5 13:05 cpio.list
Mar 5 13:05 sysv-rc.list
Mar 5 13:04 libuuid1.list
Mar 5 13:04 passwd.list
Mar 5 13:04 libss2.list
Mar 5 13:04 libblkid1.list
Mar 5 13:04 initscripts.list
Mar 5 13:04 libdevmapper1.02.1.list
Mar 5 13:04 xserver-xorg.list
Mar 5 13:04 xserver-xorg-video-all.list
Mar 5 13:04 xserver-xorg-video-trident.list
Mar 5 13:04 xserver-xorg-video-mga.list
Mar 5 13:04 xserver-xorg-video-nv.list
Mar 5 13:04 xserver-xorg-video-ati.list
Mar 5 13:04 xserver-xorg-input-all.list
Mar 5 13:04 xserver-xorg-input-evdev.list
Mar 5 13:04 xserver-xorg-input-mouse.list
Mar 5 13:04 xserver-xorg-input-synaptics.list
Mar 5 13:04 cpp.list
Mar 5 13:04 xinit.list
Mar 5 13:04 xkb-data.list
Mar 5 13:04 libxext-dev.list
Mar 5 13:04 libxext6.list
Mar 5 13:04 libxmu-headers.list
Mar 5 13:04 x11-common.list
Mar 5 13:04 foomatic-db-engine.list
Mar 5 13:04 imlib-base.list
Mar 5 13:04 curl.list
Mar 5 13:04 libkadm55.list
Mar 5 13:04 libkrb53.list
Mar 5 13:04 libkeyutils1.list
Mar 5 13:04 libkrb5-dev.list
Mar 5 13:04 comerr-dev.list
Mar 5 13:04 libcomerr2.list
Mar 5 13:04 libxml2.list
Mar 5 13:04 libxml2-dev.list
Mar 5 13:04 zlib1g-dev.list
Mar 5 13:04 zlib1g.list
Mar 5 13:04 foomatic-filters.list
Mar 5 13:04 ucf.list
Mar 5 13:04 foomatic-db.list
Mar 5 13:04 console-common.list
Mar 5 13:04 flex.list
Mar 5 13:04 console-data.list
Mar 5 13:04 sysvinit-utils.list
Mar 5 13:04 ncurses-base.list
Mar 5 13:04 libncurses5-dev.list
Mar 5 13:04 libncurses5.list
Mar 5 13:04 bsdutils.list
Mar 5 13:03 base-passwd.list
Mar 5 13:03 util-linux.list
Mar 5 13:03 lsb-base.list
Mar 5 13:03 tar.list
Mar 5 13:03 sed.list
Mar 5 13:03 ncurses-bin.list
Mar 5 13:03 mount.list
Mar 5 13:02 mktemp.list
Mar 5 13:02 login.list
Mar 5 13:02 hostname.list
Mar 5 13:02 gzip.list
Mar 5 13:02 grep.list
Mar 5 13:02 findutils.list
Mar 5 13:02 e2fsprogs.list
Mar 5 13:02 e2fslibs.list
Mar 5 13:02 libc6.list
Mar 5 13:02 libc6-ppc64.list
Mar 5 13:02 libc6-dev.list
Mar 5 13:02 libc6-dev-ppc64.list
Mar 5 13:02 linux-libc-dev.list
Mar 5 13:02 tzdata.list
Mar 5 13:02 debconf-i18n.list
Mar 5 13:02 debconf.list
Mar 5 13:02 liblocale-gettext-perl.list
Mar 5 13:02 libtext-charwidth-perl.list
Mar 5 13:02 libtext-iconv-perl.list
Mar 5 13:02 libtext-wrapi18n-perl.list
Mar 5 13:02 dpkg.list
Mar 5 13:02 coreutils.list
Mar 5 13:02 bash.list
Mar 5 13:01 debianutils.list
Thanks in anticipation
Best Regards
Wolfgang
--
http://heelsbroke.blogspot.com/
http://keyserver.mine.nu/pks/lookup?search=0xE3037113&fingerprint=on
^ permalink raw reply
* Re: ARCH=ppc -> ARCH=powerpc : help needed for dts file
From: Scott Wood @ 2008-03-05 16:32 UTC (permalink / raw)
To: benh; +Cc: linuxppc-dev, Philippe De Muyter
In-Reply-To: <1204693264.21545.165.camel@pasglop>
Benjamin Herrenschmidt wrote:
> So at this stage, that's not enough information. We need to know exactly how
> you have wired things on your board, and somebody from fsl needs to tell
> me how the ExtIrq are routed to the MPIC on that guy.
This part's easy -- the external IRQ is used as the mpic interrupt
number as-is (internal IRQs start at 16).
> Once that's done, you seem to have grasped the interrupt map... for any
> device or slot, you provide the mapping between idsel/pirq line on one side,
> and mpic interrupt & sense on the other. For PCI, sense is always 1 for an
> mpic so you mostly have to check your actual MPIC source numbers.
>
>>From your .dts, I see you've been doing some swizzling of slots using
> interrupts 1...4 ... do that correspond to EXTIRQ 5....8 ?
No, those correspond to the EXT1-4 that are the other side of the #ifdef
for this board in arch/ppc. :-)
-Scott
^ permalink raw reply
* Re: [patch 09/16] parisc: use generic pci_enable_resources()
From: Kyle McMartin @ 2008-03-05 16:17 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: linux-arch, Chris Zankel, Grant Grundler, linux-parisc,
Matthew Wilcox, Kyle McMartin, linuxppc-dev, Paul Mackerras,
linux-pci, Russell King
In-Reply-To: <20080304185821.554040328@ldl.fc.hp.com>
On Tue, Mar 04, 2008 at 11:56:55AM -0700, Bjorn Helgaas wrote:
> Use the generic pci_enable_resources() instead of the arch-specific code.
>
> Unlike this arch-specific code, the generic version:
> - checks PCI_NUM_RESOURCES (11), not DEVICE_COUNT_RESOURCE (12), resources
> - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
> - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
> - checks for resource collisions with "!r->parent"
>
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
^ permalink raw reply
* Re: ARCH=ppc -> ARCH=powerpc : help needed for dts file
From: Philippe De Muyter @ 2008-03-05 16:15 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: Scott Wood, linuxppc-dev
In-Reply-To: <1204693264.21545.165.camel@pasglop>
Hi Ben,
thanks for all the answers,
On Wed, Mar 05, 2008 at 04:01:04PM +1100, Benjamin Herrenschmidt wrote:
>
> > I also attach my current (not working) dts file attempt. It is actually
> > a modified mpc8540ads.dts file.
> >
> > I now thinks that the ide-cs (hda) discovery or not depends on the cold
> > or warm reboot.
> >
> > Here are the patches for my config (MEIP_8540) relative to a vanilla
> > linux-2.6.24. I hacked the MPC8540ADS config. The PCI4520 is the
> > multi-function chip from TI (dual-socket pc-card + iee1394 ohci and two-port
> > phy)
>
> .../...
>
> > +#ifdef CONFIG_MEIP_8540
> > + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), // External 0 : nINTPFO
> > + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), // External 1 : nINTRTC
> > + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), // External 2 : nINTPLD
> > + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), // External 3 : nINTSTX
> > + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), // External 4 : nINTPHY
> > +#if defined(CONFIG_PCI)
> > + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5 : PCI4520 MFUNC 0 */
> > + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 6 : PCI4520 MFUNC 1 */
> > + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7 : PCI4520 MFUNC 2 */
> > + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8 : PCI4520 MFUNC 3 */
> > + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 9 : PCI4520 MFUNC 4 */
> > + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10 : PCI4520 MFUNC 5 */
> > + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 11 : PCI4520 MFUNC 6 */
> > +#else
> > + 0x0, /* External 6: */
> > + 0x0, /* External 7: */
> > + 0x0, /* External 8: */
> > + 0x0, /* External 9: */
> > + 0x0, /* External 10: */
> > + 0x0, /* External 11: */
> > +#endif
> > +#else
> > 0x0, /* External 0: */
> > #if defined(CONFIG_PCI)
> > (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */
> > @@ -77,6 +100,7 @@
> > 0x0, /* External 9: */
> > 0x0, /* External 10: */
> > 0x0, /* External 11: */
> > +#endif
> > };
>
> Ok, so based on the above, I deduce that you have 12 external interrupt
> sources:
>
> 0...4 are those nINT* things. They correspond apparently do discrete
> devices on your board. You will have to create device nodes in your .dts
> for these with the appropriate interrupts property for each of these.
>
> The rest are ... hrm... weird. You -appear- to have 5 to 8 going to PCI,
> to PIRQA...D. Do that mean that you have wired your connectors on the board
> such that the interrupt does not depend on the actual slot number ?
I asked the guy who designed the hardware, and if I understand correctly :
- the i/o and memory resources of the pci device are connected to the pci bus
- the interrupts are directly connected to the MPIC
Can I describe that in the dts file ?
Philippe
>
> Or are you doing some swizzling ?
>
> Also, I would need to know how those external IRQs are connected to the MPIC,
> I don't have the spec of that chip here. Hrm. Somebody from freescale can
> help him here ?
>
> It's also not clear to me what your interrupts 9 10 and 11 are since you
> seem to only talk about PIRQA...D which is only 4 lines ..
>
> So at this stage, that's not enough information. We need to know exactly how
> you have wired things on your board, and somebody from fsl needs to tell
> me how the ExtIrq are routed to the MPIC on that guy.
>
> Once that's done, you seem to have grasped the interrupt map... for any
> device or slot, you provide the mapping between idsel/pirq line on one side,
> and mpic interrupt & sense on the other. For PCI, sense is always 1 for an
> mpic so you mostly have to check your actual MPIC source numbers.
>
> >From your .dts, I see you've been doing some swizzling of slots using
> interrupts 1...4 ... do that correspond to EXTIRQ 5....8 ?
>
> Ben.
>
> >
> > /* ************************************************************************ */
> > --- ./arch/ppc/platforms/85xx/mpc85xx_ads_common.hbk 2008-01-24 22:58:37.000000000 +0000
> > +++ ./arch/ppc/platforms/85xx/mpc85xx_ads_common.h 2008-02-20 16:36:07.000000000 +0000
> > @@ -29,10 +29,17 @@
> > extern void mpc85xx_ads_map_io(void) __init;
> >
> > /* PCI interrupt controller */
> > +#ifdef CONFIG_MEIP_8540
> > +#define PIRQA MPC85xx_IRQ_EXT5
> > +#define PIRQB MPC85xx_IRQ_EXT6
> > +#define PIRQC MPC85xx_IRQ_EXT7
> > +#define PIRQD MPC85xx_IRQ_EXT8
> > +#else
> > #define PIRQA MPC85xx_IRQ_EXT1
> > #define PIRQB MPC85xx_IRQ_EXT2
> > #define PIRQC MPC85xx_IRQ_EXT3
> > #define PIRQD MPC85xx_IRQ_EXT4
> > +#endif
> >
> > #define MPC85XX_PCI1_LOWER_IO 0x00000000
> > #define MPC85XX_PCI1_UPPER_IO 0x00ffffff
^ permalink raw reply
* Could you tell me how to use the Flat Device Tree for linux-2.6.22?
From: 郭劲 @ 2008-03-05 15:09 UTC (permalink / raw)
To: linuxppc-embedded
Hi, freescale,
I want to use the Flat Device Tree for linux-2.6.22, my board is mpc8360. could
you give me an example? thanks.
^ permalink raw reply
* The question about the linux Exception during the GETH test on MPC8360?
From: 郭劲 @ 2008-03-05 15:00 UTC (permalink / raw)
To: linuxppc-embedded
HI,friends,
I tested the GETH on MPC8360 by "iperf", after several times test, the linux is
dead, please see follow information. Then I slow down the core frequency from
667MHZ to 533MHZ, the test is OK, could you tell me where has the problem?
Thanks.
/ # iperf -c 192.168.0.2 -i 6 -t 600
------------------------------------------------------------
Client connecting to 192.168.0.2, TCP port 5001
TCP window size: 27.9 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.0.202 port 2079 connected with 192.168.0.2 port 5001
[ 3] 0.0- 6.0 sec 267 MBytes 374 Mbits/sec
[ 3] 6.0-12.0 sec 268 MBytes 375 Mbits/sec
[ 3] 12.0-18.0 sec 267 MBytes 374 Mbits/sec
[ 3] 18.0-24.0 sec 266 MBytes 372 Mbits/sec
[ 3] 24.0-30.0 sec 256 MBytes 358 Mbits/sec
[ 3] 30.0-36.0 sec 264 MBytes 369 Mbits/sec
[ 3] 36.0-42.0 sec 268 MBytes 374 Mbits/sec
[ 3] 42.0-48.0 sec 268 MBytes 375 Mbits/sec
kernel BUG in skb_checksum at net/core/skbuff.c:1120!
Oops: Exception in kernel mode, sig: 5 [#1]
NIP: C00FC1D8 LR: C00FC004 SP: C01A9BF0 REGS: c01a9b40 TRAP: 0700 Tainted: P
MSR: 00029032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c0191ab0[0] 'swapper' THREAD: c01a8000
Last syscall: 120
GPR00: 00000000 C01A9BF0 C0191AB0 00000000 00000000 001A3916 00000008 CED5C080
GPR08: 0E874000 CED5C660 CED5C0A0 CED5C05E C01D58B4 FAEA00A8 0FFFE000 007FFF00
GPR16: 0FFF8450 00000000 00000003 007FFEB0 00259DF0 0FFFF8E8 00800000 00000020
GPR24: C04EB360 00000000 BE570CCD 00000042 C0101174 000005A8 00000042 00000020
Call trace: [c0100f80] [c0101300] [c0118308] [c01186dc] [c0129678]
[c012ad1c]
[c012d238] [c001e3f8] [c0019d94] [c0019e60] [c0005
Kernel panic - not syncing: Aiee, killing interrupt handler!
<0>Rebooting in 180 seconds..
Follow is the UBoot information about my mpc8360 board:
U-Boot 1.2.0 (Mar 5 2008 - 17:47:06) MPC83XX
CPU: e300c1, MPC8360E, Rev: 20 at 660 MHz, CSB: 330 MHz
Board: Freescale MPC8360EMDS
I2C: ready
DRAM:
DIMM type: 32MX64U-40B
SPD size: 128
EEPROM size: 256
Memory type: 7
Row addr: 13
Column addr: 10
# of rows: 1
Row density: 64
# of banks: 4
Data width: 64
Chip width: 8
Refresh rate: 82
CAS latencies: 0C
Write latencies: 02
tRP: 72
tRCD: 72
DDR DIMM: data bus width is 64 bit without ECC2
DDRC ECC mode: OFF
SDRAM on Local Bus: 64 MB
DDR RAM: 256 MB
FLASH: 16 MB
PCI clock is 66MHz
PCI 32bit bus on PMC1 & PMC2 & PMC3
In: serial
Out: serial
Err: serial
Net: UEC: PHY is Marvell 88E11x1 (1410cc1)
FSL UEC0: Full Duplex
FSL UEC0: Speed 1000BT
FSL UEC0: Link is up
FSL UEC0
Hit any key to stop autoboot: 0
=> clocks
Clock configuration Guo Jing:
Core: 660 MHz
Coherent System Bus: 330 MHz
QE: 396 MHz
BRG: 198 MHz
Local Bus Controller: 330 MHz
Local Bus: 82 MHz
DDR: 330 MHz
DDR Secondary: 330 MHz
SEC: 110 MHz
I2C1: 330 MHz
I2C2: 330 MHz
^ permalink raw reply
* Re: [patch 08/16] mn10300: use generic pci_enable_resources()
From: David Howells @ 2008-03-05 15:13 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: linux-arch, Chris Zankel, Grant Grundler, linux-parisc,
Matthew Wilcox, Kyle McMartin, linuxppc-dev, Paul Mackerras,
linux-pci, linux-arm-kernel, Russell King
In-Reply-To: <20080304185821.354198782@ldl.fc.hp.com>
Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
> Use the generic pci_enable_resources() instead of the arch-specific code.
>
> Unlike this arch-specific code, the generic version:
> - checks PCI_NUM_RESOURCES (11), not 6, resources
> - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
> - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
> - checks for resource collisions with "!r->parent"
>
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: David Howells <dhowells@redhat.com>
^ permalink raw reply
* Re: [patch 05/16] frv: use generic pci_enable_resources()
From: David Howells @ 2008-03-05 14:52 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: linux-arch, Chris Zankel, Grant Grundler, linux-parisc,
Matthew Wilcox, Kyle McMartin, linuxppc-dev, Paul Mackerras,
linux-pci, linux-arm-kernel, Russell King
In-Reply-To: <20080304185820.723623873@ldl.fc.hp.com>
Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
> Use the generic pci_enable_resources() instead of the arch-specific code.
>
> Unlike this arch-specific code, the generic version:
> - checks PCI_NUM_RESOURCES (11), not 6, resources
> - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
> - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
> - checks for resource collisions with "!r->parent"
>
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: David Howells <dhowells@redhat.com>
^ permalink raw reply
* Re: [patch 01/16] PCI: add generic pci_enable_resources()
From: David Howells @ 2008-03-05 14:53 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: linux-arch, Chris Zankel, Grant Grundler, linux-parisc,
Matthew Wilcox, Kyle McMartin, linuxppc-dev, Paul Mackerras,
linux-pci, linux-arm-kernel, Russell King
In-Reply-To: <20080304185819.885549413@ldl.fc.hp.com>
Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
> Each architecture has its own pcibios_enable_resources() implementation.
> These differ in many minor ways that have nothing to do with actual
> architectural differences. Follow-on patches will make most arches
> use this generic version instead.
>
> This version is based on powerpc, which seemed most up-to-date. The only
> functional difference from the x86 version is that this uses "!r->parent"
> to check for resource collisions instead of "!r->start && r->end".
>
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: David Howells <dhowells@redhat.com>
^ permalink raw reply
* Re: Unresolved symbols while inserting a module in linux
From: ravi.rao @ 2008-03-05 15:01 UTC (permalink / raw)
To: mahendra varman
Cc: linuxppc-embedded-bounces+ravi.rao=rflelect.com, linux-kernel,
linuxppc-embedded
In-Reply-To: <4ac2955e0803050644g2ccd2e46n305d2790389b517@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3921 bytes --]
Hi,
In 2.6 kernel All the functions that are being used by a module should
have been exported by the provider..
For Example If your driver module say foo.ko wants to use function x ( )
defined in bar.c, then in bar.c the function x () had be exported using
EXPORT_SYMBOL_GPL(x); If not when you try to insmod foo.ko U will get
unresolved symbol x.
There should be something similar in 2.4..
Thanks,
Ravishankar Govindarao
RFL Electronics Inc.
E-mail : Ravi.Rao@rflelect.com
Voice: 973.334.3100 Ext. 233
Fax: 973.334.3863
CONFIDENTIALITY NOTE
This e-mail, including any attachments, may contain confidential and/or
legally privileged information. The Information is intended only for the
use of the individual or entity named on this e-mail . If you are not the
intended recipient, you are hereby notified that any disclosure, copying,
distribution, or the taking of any action in reliance on the contents of
this transmitted Information is strictly prohibited. Further, if you are
not the intended recipient, please notify us by return e-mail and delete
the Information promptly.
"mahendra varman" <mahendravarman15@gmail.com>
Sent by: linuxppc-embedded-bounces+ravi.rao=rflelect.com@ozlabs.org
03/05/2008 09:44 AM
To
linuxppc-embedded@ozlabs.org, linux-kernel@vger.kernel.org
cc
Subject
Unresolved symbols while inserting a module in linux
Hi all
For a customised hdlc card we have written hdlc driver.
we need to compile it as a module in linux 2.4.25 version
Thru Config.in we have defined the customised driver as tristate and
selected 'M' in menuconfig for that driver
The other dependencies generic hdlc driver, cisco , framedelay , ppp
etc are compiled as configured within the kernel itself
By giving make modules we have produced driver.o file
When I insert the driver.o using insmod iam getting the following
unresolved symbols
Even though the dependencies have been configured with the kernel
itself iam getting these unresolved symbols
If we use modprobe driver.o (or) modprobe driver it is reporting
driver:applet not found..
Help me to produce a module with its dependencies also to solve the
unresolved symbols error
Thanks
---------------------------------------------------- unresolved
symbols after insmod
------------------------------------------------------
Using driver.o
insmod: unresolved symbol pci_write_config_byte
insmod: unresolved symbol __netdev_watchdog_up
insmod: unresolved symbol schedule_timeout
insmod: unresolved symbol __kfree_skb
insmod: unresolved symbol alloc_skb
insmod: unresolved symbol pci_register_driver
insmod: unresolved symbol register_hdlc_device
insmod: unresolved symbol unregister_hdlc_device
insmod: unresolved symbol __release_region
insmod: unresolved symbol kmalloc
insmod: unresolved symbol pci_free_consistent
insmod: unresolved symbol pci_free_consistent
insmod: unresolved symbol __save_flags_ptr
insmod: unresolved symbol ioremap
insmod: unresolved symbol cpu_raise_softirq
insmod: unresolved symbol free_irq
insmod: unresolved symbol __out_of_line_bug
insmod: unresolved symbol iounmap
insmod: unresolved symbol pci_alloc_consistent
insmod: unresolved symbol iomem_resource
insmod: unresolved symbol kfree
insmod: unresolved symbol strlen
insmod: unresolved symbol request_irq
insmod: unresolved symbol netif_rx
insmod: unresolved symbol pci_unregister_driver
insmod: unresolved symbol skb_over_panic
insmod: unresolved symbol pci_set_master
insmod: unresolved symbol hdlc_ioctl
insmod: unresolved symbol jiffies
insmod: unresolved symbol __copy_tofrom_user
insmod: unresolved symbol __restore_flags
insmod: unresolved symbol softnet_data
insmod: unresolved symbol __request_region
insmod: unresolved symbol printk
insmod: unresolved symbol __cli
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
[-- Attachment #2: Type: text/html, Size: 5852 bytes --]
^ permalink raw reply
* Unresolved symbols while inserting a module in linux
From: mahendra varman @ 2008-03-05 14:44 UTC (permalink / raw)
To: linuxppc-embedded, linux-kernel
Hi all
For a customised hdlc card we have written hdlc driver.
we need to compile it as a module in linux 2.4.25 version
Thru Config.in we have defined the customised driver as tristate and
selected 'M' in menuconfig for that driver
The other dependencies generic hdlc driver, cisco , framedelay , ppp
etc are compiled as configured within the kernel itself
By giving make modules we have produced driver.o file
When I insert the driver.o using insmod iam getting the following
unresolved symbols
Even though the dependencies have been configured with the kernel
itself iam getting these unresolved symbols
If we use modprobe driver.o (or) modprobe driver it is reporting
driver:applet not found..
Help me to produce a module with its dependencies also to solve the
unresolved symbols error
Thanks
---------------------------------------------------- unresolved
symbols after insmod
------------------------------------------------------
Using driver.o
insmod: unresolved symbol pci_write_config_byte
insmod: unresolved symbol __netdev_watchdog_up
insmod: unresolved symbol schedule_timeout
insmod: unresolved symbol __kfree_skb
insmod: unresolved symbol alloc_skb
insmod: unresolved symbol pci_register_driver
insmod: unresolved symbol register_hdlc_device
insmod: unresolved symbol unregister_hdlc_device
insmod: unresolved symbol __release_region
insmod: unresolved symbol kmalloc
insmod: unresolved symbol pci_free_consistent
insmod: unresolved symbol pci_free_consistent
insmod: unresolved symbol __save_flags_ptr
insmod: unresolved symbol ioremap
insmod: unresolved symbol cpu_raise_softirq
insmod: unresolved symbol free_irq
insmod: unresolved symbol __out_of_line_bug
insmod: unresolved symbol iounmap
insmod: unresolved symbol pci_alloc_consistent
insmod: unresolved symbol iomem_resource
insmod: unresolved symbol kfree
insmod: unresolved symbol strlen
insmod: unresolved symbol request_irq
insmod: unresolved symbol netif_rx
insmod: unresolved symbol pci_unregister_driver
insmod: unresolved symbol skb_over_panic
insmod: unresolved symbol pci_set_master
insmod: unresolved symbol hdlc_ioctl
insmod: unresolved symbol jiffies
insmod: unresolved symbol __copy_tofrom_user
insmod: unresolved symbol __restore_flags
insmod: unresolved symbol softnet_data
insmod: unresolved symbol __request_region
insmod: unresolved symbol printk
insmod: unresolved symbol __cli
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox