* [PATCH v2 0/11] FSL eSDHC support
From: Anton Vorontsov @ 2009-03-05 20:27 UTC (permalink / raw)
To: Pierre Ossman
Cc: Ben Dooks, Arnd Bergmann, Liu Dave, linux-kernel, linuxppc-dev,
sdhci-devel
Hi all,
Much thanks for the previous comments. Here comes v2.
Changes since v1:
- "Add support for bus-specific IO memory accessors" patch no longer
touches sdhci-pci. The changes were no longer needed since I dropped
"Add type checking ..." patch back in RFCv2;
- Patch "Add support for hosts with strict 32 bit addressing" dropped.
Now we handle the 32 bit magic in eSDHC's writew() accessor;
- Patch "Add quirk for controllers with max. block size up to 4096 bytes"
replaced by "Add quirk for forcing maximum block size to 2048 bytes";
- SDHCI_INT_ALL_MASK changed to (unsigned int)-1;
- Addressed Pierre's comments in "Add support for card-detection polling"
patch.
Changes since the third RFC:
- Use uninitialized_var() (suggested by Laurent Pinchart);
- Fixed a bug in eSDHC SDCLK prescaler calculations because of which
we were over-clocking the SDCLK, and that caused CRC errors using some
SD cards;
- Not a change, but some status: SDHS (50 MHz) cards were tested to
NOT work (at least on MPC837x boards) -- this is to be investigated
further. SDHC (> 4 GB) cards were not tested, yet.
Changes since the second RFC:
- Addressed all comments that were raised by Pierre Ossman.
There were too many to mention them all, so here is the link:
http://lkml.org/lkml/2009/2/6/320
Changes since the first RFC:
- Use of_iomap() in sdhci-of.c (suggested by Arnd Bergmann). Also added
Arnd's Acked-by: line for the sdhci-of patch.
- Kconfig help text improved (thanks to Matt Sealey and M. Warner Losh).
- In "sdhci: Add quirk to suppress PIO interrupts during DMA transfers"
patch: sdhci_init() now clears SDHCI_PIO_DISABLED flag, otherwise we
won't disable PIO interrupts after suspend.
- New patch: "sdhci: Add type checking for IO memory accessors"
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
^ permalink raw reply
* Re: [PATCH] powerpc/cell: Only build Axon MSI driver for IBM Cell Blades
From: Olof Johansson @ 2009-03-05 20:08 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev
In-Reply-To: <1236262025.8325.12.camel@localhost>
On Fri, Mar 06, 2009 at 01:07:05AM +1100, Michael Ellerman wrote:
> On Thu, 2009-03-05 at 01:13 -0600, Olof Johansson wrote:
> > On Thu, Mar 05, 2009 at 03:41:41PM +1100, Michael Ellerman wrote:
> > > The hardware is only present on those machines, and the driver
> > > depends on infrastructure which is selected by the Kconfig for
> > > cell blades.
> >
> > Wouldn't it make more sense to make a separate (AXON_MSI) config option
> > depend on PPC_IBM_CELL_BLADE?
>
> Maybe, it would make the makefile cleaner, at the expense of a bit more
> Kconfig. I'm not sure what people prefer, I guess I'm neutral and you're
> voting for the latter, so I'll respin it that way :)
Yeah, I'm not really that picky either, it just set off a red flag
w.r.t. setting a bad precedence on ifdef:ing in the makefile instead of
Kconfig engineering. Slippery slope and all that.
-Olof
^ permalink raw reply
* [PATCH] powerpc/pseries failed reconfig notifier chain call cleanup
From: Nathan Fontenot @ 2009-03-05 19:53 UTC (permalink / raw)
To: linuxppc-dev
The return code from invoking the notifier chain when updating the
ibm,dynamic-memory property is not handled properly. In failure
cases (rc == NOTIFY_BAD) we should be restoring the original value
of the property. In success (rc == NOTIFY_OK) we should be returning
zero from the calling routine.
Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
---
arch/powerpc/platforms/pseries/reconfig.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
Index: linux-2.6/arch/powerpc/platforms/pseries/reconfig.c
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/pseries/reconfig.c 2008-10-23 22:29:24.000000000 -0500
+++ linux-2.6/arch/powerpc/platforms/pseries/reconfig.c 2009-03-05 13:20:00.000000000 -0600
@@ -468,9 +468,13 @@
rc = blocking_notifier_call_chain(&pSeries_reconfig_chain,
action, value);
+ if (rc == NOTIFY_BAD) {
+ rc = prom_update_property(np, oldprop, newprop);
+ return -ENOMEM;
+ }
}
- return rc;
+ return 0;
}
/**
^ permalink raw reply
* Re: [PATCH/RFC] ps3/block: Add ps3vram-ng driver for accessing video RAM as block device
From: Olaf Hering @ 2009-03-05 18:12 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Jens Axboe, Arnd Bergmann, Linux Kernel Development, Jim Paris,
Linux/PPC Development, linux-mtd, Vivien Chappelier,
David Woodhouse, Cell Broadband Engine OSS Development
In-Reply-To: <alpine.LRH.2.00.0903051123240.2618@vixen.sonytel.be>
On Thu, Mar 05, Geert Uytterhoeven wrote:
> On Thu, 5 Mar 2009, Geert Uytterhoeven wrote:
> > On Thu, 5 Mar 2009, Olaf Hering wrote:
> > > I see our old mtddriver does not have modalias support for autoloading.
> >
> > You forgot to backport commit 0a2d15b928e0b1673d4ed5f48d95af211b6fcc06
> > ("mtd/ps3vram: Add modalias support to the ps3vram driver") to the openSuSE
> > tree?
>
> Or do you mean that udev doesn't load mtdblock automatically?
I have not tried current kernels.
Our older versions of mtd based ps3vram do not have the autoloading feature.
So, please merge the block based ps3vram.ko.
Thanks for pushing it into mainline.
Olaf
^ permalink raw reply
* Re: [Powerpc] Next March 5 build failure: platform/pseries/msi.o
From: Sachin P. Sant @ 2009-03-05 16:53 UTC (permalink / raw)
To: michael; +Cc: linuxppc-dev, linux-next, Stephen Rothwell
In-Reply-To: <1236262014.8325.10.camel@localhost>
Michael Ellerman wrote:
> Dang it, that's my fault. Thanks for catching it Sachin.
>
> I assumed pseries always enabled EEH, but I see now you can disable it
> if you have EMBEDDED set (which your config does).
>
> It's a bit yucky making the MSI code depend on EEH, but the only other
> option would be to pull half the EEH code out - so I guess that's what
> I'll do.
>
> Does this patch fix it?
Thanks for the patch Michael. It fixes the build break.
Regards
-Sachin
--
---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------
^ permalink raw reply
* Re: [PATCH/RFC] ps3/block: Add ps3vram-ng driver for accessing video RAM as block device
From: Geert Uytterhoeven @ 2009-03-05 16:45 UTC (permalink / raw)
To: Jens Axboe
Cc: Arnd Bergmann, Linux Kernel Development, Jim Paris,
Linux/PPC Development, linux-mtd, Vivien Chappelier,
David Woodhouse, Cell Broadband Engine OSS Development
In-Reply-To: <20090305110940.GY11787@kernel.dk>
On Thu, 5 Mar 2009, Jens Axboe wrote:
> On Thu, Mar 05 2009, Geert Uytterhoeven wrote:
> > On Thu, 5 Mar 2009, Jens Axboe wrote:
> > > On Wed, Mar 04 2009, Geert Uytterhoeven wrote:
> > > > Below is the rewrite of the PS3 Video RAM Storage Driver as a plain block
> > > > device, as requested by Arnd Bergmann.
> > > I'd rewrite this as a ->make_request_fn handler instead. Then you can
> > > get rid of the kernel thread. IOW, change
> > >
> > > queue = blk_init_queue(ps3vram_request, &priv->lock);
> > >
> > > to
> > >
> > > queue = blk_alloc_queue(GFP_KERNEL);
> > > blk_queue_make_request(queue, ps3vram_make_request);
> >
> > Thanks, I didn't know that part...
> >
> > > Add error handling of course, and call blk_queue_max_*() to set your
> > > limits for this device.
> >
> > I took out the blk_queue_max_*() calls (compared to ps3disk.c), as
> > none of the limits apply, and the defaults are fine.
> >
> > Is that OK, or is it better to make it explicit?
>
> I think it's always good to make it explicit. Plus for this case you
> definitely need it, as blk_init_queue() wont do it for you anymore.
blk_queue_make_request() does it for me, too:
void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
{
...
blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
...
blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
...
blk_queue_max_sectors(q, SAFE_MAX_SECTORS);
...
}
struct request_queue *
blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
{
...
blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
...
}
> > > Then add a ps3vram_make_request() ala:
> >
> > > static void ps3vram_do_request(struct request_queue *q, struct bio *bio)
> > > {
> > > }
> > >
> > > I just typed it here, so if it doesn't compile you get to keep the
> > > pieces :-)
> >
> > OK, I'll give it a try...
> >
> > BTW, does this mean the `simple' way, which I used based on LDD3, is
> > deprecated?
>
> Depends.. It's obviously not a very effective approach, since you punt
> to a thread for each request. But if you need the IO scheduler helping
> you with merging and sorting (for a rotational device), it still has
> some merit. For this particular case, the ->make_request_fn approach is
> much better.
Without the thread, performance indeed increased.
But then I noticed ps3vram_make_request() may be called concurrently, so I had
to add a mutex to avoid data corruption. This slows the driver down, and in the
end, the version with a thread turns out to be ca. 1% faster. The version
without a thread is about 50 lines less code, though.
With kind regards,
Geert Uytterhoeven
Software Architect
Sony Techsoft Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium
Phone: +32 (0)2 700 8453
Fax: +32 (0)2 700 8622
E-mail: Geert.Uytterhoeven@sonycom.com
Internet: http://www.sony-europe.com/
A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010
^ permalink raw reply
* Re: PHY not found after migration of gianfar driver to an of_platform_driver
From: Grant Likely @ 2009-03-05 15:08 UTC (permalink / raw)
To: Michael Guntsche; +Cc: linuxppc-dev
In-Reply-To: <20e286be3bc61f03018fc94366e6fd01@localhost>
On Thu, Mar 5, 2009 at 12:41 AM, Michael Guntsche <mike@it-loops.com> wrote=
:
> On Wed, 4 Mar 2009 08:57:59 -0700, Grant Likely <grant.likely@secretlab.c=
a>
> wrote:
>> You might be able to use of_attach_node() & prom_add_property() to
>> modify the tree, but I've never done it myself. =A0Give it a try and
>> tell me if it works. =A0:-)
>>
>
> Hello Grant,
>
> I made some progress in this area, but I have now hit a problem I do not
> know how to solve.
> Taking code from the iseries/vio.c files I am able to add properties with
> add_string_property and add_raw_property.
> The problem I have is adding properties like
>
> =A0 =A0reg =3D <0x2520 0x20>
>
> I know how to add a property
>
> =A0 reg =3D <0x2520>
>
> but I do not know what data structure to pass to add_raw_property to add
> two numbers there.
Device tree properties are just "bags of bytes". 'cells' in device
tree nomenclature are big endian u32 values. So, for specifying a
property with one cell (ie: reg =3D <0x2520>;), the data length is 4
bytes and the data is an array of 4 bytes: 0x00 0x00 0x25 0x20. To
add a property with two cells (ie: reg =3D <0x2520 0x20>;), the data
length is 8 bytes and the data is and array of 8 bytes: 0x00 0x00 0x25
0x20 0x00 0x00 0x00 0x20.
g.
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH] powerpc/cell: Only build Axon MSI driver for IBM Cell Blades
From: Michael Ellerman @ 2009-03-05 14:07 UTC (permalink / raw)
To: Olof Johansson; +Cc: linuxppc-dev
In-Reply-To: <20090305071356.GA9412@lixom.net>
[-- Attachment #1: Type: text/plain, Size: 857 bytes --]
On Thu, 2009-03-05 at 01:13 -0600, Olof Johansson wrote:
> On Thu, Mar 05, 2009 at 03:41:41PM +1100, Michael Ellerman wrote:
> > The hardware is only present on those machines, and the driver
> > depends on infrastructure which is selected by the Kconfig for
> > cell blades.
>
> Wouldn't it make more sense to make a separate (AXON_MSI) config option
> depend on PPC_IBM_CELL_BLADE?
Maybe, it would make the makefile cleaner, at the expense of a bit more
Kconfig. I'm not sure what people prefer, I guess I'm neutral and you're
voting for the latter, so I'll respin it that way :)
cheers
--
Michael Ellerman
OzLabs, IBM Australia Development Lab
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)
We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* Re: [Powerpc] Next March 5 build failure: platform/pseries/msi.o
From: Michael Ellerman @ 2009-03-05 14:06 UTC (permalink / raw)
To: Sachin P. Sant; +Cc: linuxppc-dev, linux-next, Stephen Rothwell
In-Reply-To: <49AFB92B.8060606@in.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 1853 bytes --]
On Thu, 2009-03-05 at 17:06 +0530, Sachin P. Sant wrote:
> Next March 5th randconfig build fails with
>
> arch/powerpc/platforms/pseries/msi.c: In function find_pe_dn:
> arch/powerpc/platforms/pseries/msi.c:210: error: implicit declaration of function find_device_pe
>
> CONFIG_EEH is not set in the config.
>
> Attached here is the .config.
Dang it, that's my fault. Thanks for catching it Sachin.
I assumed pseries always enabled EEH, but I see now you can disable it
if you have EMBEDDED set (which your config does).
It's a bit yucky making the MSI code depend on EEH, but the only other
option would be to pull half the EEH code out - so I guess that's what
I'll do.
Does this patch fix it?
cheers
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pse
index ddc2a30..dbb5109 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -25,6 +25,11 @@ config EEH
depends on PPC_PSERIES && PCI
default y if !EMBEDDED
+config PSERIES_MSI
+ bool
+ depends on PCI_MSI && EEH
+ default y
+
config SCANLOG
tristate "Scanlog dump interface"
depends on RTAS_PROC && PPC_PSERIES
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/ps
index dfe574a..0ce691d 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_SCANLOG) += scanlog.o
obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o eeh_sysfs.
obj-$(CONFIG_KEXEC) += kexec.o
obj-$(CONFIG_PCI) += pci.o pci_dlpar.o
-obj-$(CONFIG_PCI_MSI) += msi.o
+obj-$(CONFIG_PSERIES_MSI) += msi.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o
obj-$(CONFIG_MEMORY_HOTPLUG) += hotplug-memory.o
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply related
* [Powerpc] Next March 5 build failure: platform/pseries/msi.o
From: Sachin P. Sant @ 2009-03-05 11:36 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Stephen Rothwell, linux-next
In-Reply-To: <20090305195008.f4fd4ce0.sfr@canb.auug.org.au>
[-- Attachment #1: Type: text/plain, Size: 455 bytes --]
Next March 5th randconfig build fails with
arch/powerpc/platforms/pseries/msi.c: In function find_pe_dn:
arch/powerpc/platforms/pseries/msi.c:210: error: implicit declaration of function find_device_pe
CONFIG_EEH is not set in the config.
Attached here is the .config.
Thanks
-Sachin
--
---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------
[-- Attachment #2: config_next_20090305 --]
[-- Type: text/plain, Size: 58704 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc7
# Thu Mar 5 16:10:49 2009
#
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
# CONFIG_VIRT_CPU_ACCOUNTING is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
CONFIG_PPC_OF_PLATFORM_PCI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_NS is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
# CONFIG_PRINTK is not set
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLQB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
CONFIG_PPC_PSERIES=y
CONFIG_PPC_SPLPAR=y
# CONFIG_EEH is not set
CONFIG_LPARCFG=y
CONFIG_PPC_PSERIES_DEBUG=y
CONFIG_PPC_SMLPAR=y
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC_PASEMI=y
#
# PA Semi PWRficient options
#
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
CONFIG_PPC_PS3=y
#
# PS3 Platform Options
#
CONFIG_PS3_ADVANCED=y
CONFIG_PS3_HTAB_SIZE=20
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
CONFIG_PS3_SYS_MANAGER=y
CONFIG_PS3_STORAGE=y
CONFIG_PS3_DISK=y
CONFIG_PS3_ROM=y
CONFIG_PS3_FLASH=y
# CONFIG_PS3_LPM is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_COMMON=y
CONFIG_PPC_CELL_NATIVE=y
# CONFIG_PPC_IBM_CELL_BLADE is not set
CONFIG_PPC_CELLEB=y
CONFIG_PPC_CELL_QPACE=y
#
# Cell Broadband Engine options
#
# CONFIG_SPU_FS is not set
# CONFIG_SPU_BASE is not set
CONFIG_CBE_RAS=y
CONFIG_CBE_CPUFREQ=y
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_UDBG_BEAT=y
CONFIG_XICS=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
# CONFIG_RTAS_PROC is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_REGREAD=y
CONFIG_IBMVIO=y
# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
CONFIG_PPC_INDIRECT_IO=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPU Frequency drivers
#
CONFIG_PPC_PASEMI_CPUFREQ=y
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_BINFMT_ELF is not set
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_CRASH_DUMP=y
# CONFIG_IRQ_ALL_CPUS is not set
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_HAS_HASH_64K is not set
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_VERBOSE=y
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_IOCTL is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
# CONFIG_YENTA_RICOH is not set
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_ELECTRA_CF=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_RELOCATABLE=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_PACKET is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
# CONFIG_IP_PIMSM_V2 is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_SECMARK is not set
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
# CONFIG_NF_CONNTRACK_IRC is not set
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=y
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
# CONFIG_IP_NF_ARP_MANGLE is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV6 is not set
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_DECNET=y
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
# CONFIG_IPDDP_DECAP is not set
CONFIG_PHONET=y
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_ATM is not set
# CONFIG_NET_SCH_PRIO is not set
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=y
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
CONFIG_NET_CLS_RSVP=y
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=y
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
# CONFIG_NET_ACT_MIRRED is not set
CONFIG_NET_ACT_NAT=y
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_ACT_SKBEDIT=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=y
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
CONFIG_MKISS=y
# CONFIG_6PACK is not set
# CONFIG_BPQETHER is not set
# CONFIG_BAYCOM_SER_FDX is not set
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
# CONFIG_YAM is not set
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=y
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_NL80211=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
# CONFIG_MAC80211_RC_PID is not set
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_LEDS=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
CONFIG_SSFDC=y
CONFIG_MTD_OOPS=y
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PCI=y
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=y
CONFIG_MTD_DOC2001=y
CONFIG_MTD_DOC2001PLUS=y
CONFIG_MTD_DOCPROBE=y
CONFIG_MTD_DOCECC=y
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND_MUSEUM_IDS=y
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_PASEMI=y
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_PLATFORM=y
# CONFIG_MTD_NAND_FSL_ELBC is not set
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
# CONFIG_MTD_ONENAND_SIM is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INIC162X=y
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_CMD64X=y
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
CONFIG_PATA_EFAR=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT3X3=y
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT821X=y
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_OLDPIIX is not set
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NS87410=y
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_PCMCIA is not set
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RZ1000=y
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_PATA_SCC=y
CONFIG_PATA_SCH=y
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# A new alternative FireWire stack is available with EXPERIMENTAL=y
#
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
CONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_BUS=y
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
CONFIG_I2O_PROC=y
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=y
CONFIG_TUN=y
CONFIG_VETH=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
# CONFIG_ARCNET_1051 is not set
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
# CONFIG_SUNGEM is not set
CONFIG_CASSINI=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=y
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
CONFIG_HP100=y
CONFIG_IBMVETH=y
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_RXB=128
CONFIG_IBM_NEW_EMAC_TXB=64
CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
# CONFIG_IBM_NEW_EMAC_DEBUG is not set
CONFIG_IBM_NEW_EMAC_ZMII=y
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
CONFIG_FEALNX=y
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=y
# CONFIG_EPIC100 is not set
CONFIG_SMSC9420=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_NET_POCKET=y
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=y
CONFIG_E1000=y
# CONFIG_E1000E is not set
CONFIG_IGB=y
# CONFIG_NS83820 is not set
CONFIG_HAMACHI=y
CONFIG_R8169=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_SPIDER_NET=y
CONFIG_GELIC_NET=y
CONFIG_GELIC_WIRELESS=y
CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_JME=y
# CONFIG_NETDEV_10000 is not set
CONFIG_TR=y
CONFIG_IBMOL=y
CONFIG_3C359=y
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_CS is not set
CONFIG_LIBERTAS_SDIO=y
CONFIG_LIBERTAS_DEBUG=y
CONFIG_LIBERTAS_THINFIRM=y
CONFIG_AIRO=y
CONFIG_ATMEL=y
# CONFIG_PCI_ATMEL is not set
# CONFIG_PCMCIA_ATMEL is not set
CONFIG_AIRO_CS=y
CONFIG_MAC80211_HWSIM=y
CONFIG_ATH9K=y
CONFIG_ATH9K_DEBUG=y
CONFIG_IPW2100=y
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
# CONFIG_IPW2200 is not set
CONFIG_LIBIPW=y
CONFIG_LIBIPW_DEBUG=y
CONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
CONFIG_HOSTAP_PLX=y
CONFIG_HOSTAP_PCI=y
CONFIG_HOSTAP_CS=y
CONFIG_B43=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_HERMES=y
# CONFIG_HERMES_CACHE_FW_ON_INIT is not set
CONFIG_PLX_HERMES=y
# CONFIG_TMD_HERMES is not set
CONFIG_NORTEL_HERMES=y
# CONFIG_PCI_HERMES is not set
# CONFIG_PCMCIA_HERMES is not set
CONFIG_PCMCIA_SPECTRUM=y
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=y
#
# Enable USB support to see WiMAX USB drivers
#
CONFIG_WIMAX_I2400M_SDIO=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
CONFIG_PCMCIA_AXNET=y
# CONFIG_ARCNET_COM20020_CS is not set
CONFIG_PCMCIA_IBMTR=y
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
CONFIG_ATM_LANAI=y
# CONFIG_ATM_ENI is not set
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=y
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=y
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPPOATM=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_ISDN=y
CONFIG_MISDN=y
CONFIG_MISDN_DSP=y
CONFIG_MISDN_L1OIP=y
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=y
CONFIG_MISDN_HFCMULTI=y
CONFIG_ISDN_I4L=y
# CONFIG_ISDN_PPP is not set
# CONFIG_ISDN_AUDIO is not set
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=y
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
#
# Active cards
#
# CONFIG_ISDN_DRV_GIGASET is not set
CONFIG_ISDN_CAPI=y
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=y
CONFIG_ISDN_CAPI_CAPIDRV=y
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1PCI is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=y
CONFIG_ISDN_DRV_AVMB1_AVM_CS=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=y
# CONFIG_ISDN_DRV_AVMB1_C4 is not set
# CONFIG_CAPI_EICON is not set
CONFIG_PHONE=y
CONFIG_PHONE_IXJ=y
CONFIG_PHONE_IXJ_PCMCIA=y
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_DA9034=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_WM97XX=y
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_UINPUT=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_XILINX_XPS_PS2=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=y
CONFIG_DIGIEPCA=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_ISI=y
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
CONFIG_SX=y
# CONFIG_RIO is not set
CONFIG_STALDRV=y
CONFIG_STALLION=y
# CONFIG_ISTALLION is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_ICOM=y
CONFIG_SERIAL_TXX9=y
CONFIG_HAS_TXX9_SERIAL=y
CONFIG_SERIAL_TXX9_NR_UARTS=6
CONFIG_SERIAL_TXX9_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL=y
# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_CONSOLE=y
CONFIG_HVC_RTAS=y
# CONFIG_HVC_BEAT is not set
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HVCS=y
CONFIG_IBM_BSR=y
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_PASEMI=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_R3964=y
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
# CONFIG_CARDMAN_4000 is not set
CONFIG_CARDMAN_4040=y
CONFIG_IPWIRELESS=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIAPRO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_PASEMI is not set
CONFIG_I2C_SIMTEC=y
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y
#
# Miscellaneous I2C Chip support
#
CONFIG_PCF8575=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
#
# SPI Protocol Masters
#
CONFIG_SPI_TLE62X0=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=y
CONFIG_HTC_PASIC3=y
CONFIG_TWL4030_CORE=y
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_TWL4030 is not set
CONFIG_REGULATOR_WM8350=y
# CONFIG_REGULATOR_WM8400 is not set
# CONFIG_REGULATOR_DA903X is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_CUSTOMIZE=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_MXL5005S=y
# CONFIG_MEDIA_TUNER_MXL5007T is not set
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEO_BTCX=y
CONFIG_VIDEO_IR=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=y
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9875=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_M52790=y
CONFIG_VIDEO_WM8775=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_CX25840=y
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
CONFIG_VIDEO_VIVI=y
CONFIG_VIDEO_BT848=y
# CONFIG_VIDEO_SAA6588 is not set
CONFIG_VIDEO_BWQCAM=y
CONFIG_VIDEO_CPIA=y
CONFIG_VIDEO_SAA5246A=y
CONFIG_VIDEO_SAA5249=y
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_SAA7134_ALSA=y
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
CONFIG_VIDEO_HEXIUM_GEMINI=y
CONFIG_VIDEO_CX88=y
CONFIG_VIDEO_CX88_BLACKBIRD=y
CONFIG_VIDEO_CX88_MPEG=y
CONFIG_VIDEO_IVTV=y
CONFIG_VIDEO_FB_IVTV=y
CONFIG_VIDEO_CAFE_CCIC=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_MT9M001=y
CONFIG_SOC_CAMERA_MT9M111=y
CONFIG_SOC_CAMERA_MT9T031=y
# CONFIG_SOC_CAMERA_MT9V022 is not set
CONFIG_SOC_CAMERA_TW9910=y
# CONFIG_SOC_CAMERA_PLATFORM is not set
CONFIG_SOC_CAMERA_OV772X=y
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_GEMTEK_PCI=y
CONFIG_RADIO_MAXIRADIO=y
CONFIG_RADIO_MAESTRO=y
# CONFIG_RADIO_TEA5764 is not set
CONFIG_DAB=y
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_MGA=y
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=y
# CONFIG_FB_OF is not set
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
# CONFIG_FB_MATROX_MULTIHEAD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not set
# CONFIG_FB_ATY_BACKLIGHT is not set
CONFIG_FB_S3=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=y
CONFIG_FB_NEOMAGIC=y
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
# CONFIG_FB_CARMINE is not set
CONFIG_FB_TMIO=y
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_SM501=y
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_PS3 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_DA903X=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PORTMAN2X4=y
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=y
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
CONFIG_SND_ALS300=y
CONFIG_SND_ALS4000=y
CONFIG_SND_ALI5451=y
CONFIG_SND_ATIIXP=y
CONFIG_SND_ATIIXP_MODEM=y
CONFIG_SND_AU8810=y
CONFIG_SND_AU8820=y
CONFIG_SND_AU8830=y
CONFIG_SND_AW2=y
CONFIG_SND_BT87X=y
CONFIG_SND_BT87X_OVERCLOCK=y
CONFIG_SND_CA0106=y
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_OXYGEN_LIB=y
CONFIG_SND_OXYGEN=y
CONFIG_SND_CS4281=y
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
CONFIG_SND_DARLA20=y
CONFIG_SND_GINA20=y
CONFIG_SND_LAYLA20=y
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
CONFIG_SND_LAYLA24=y
CONFIG_SND_MONA=y
CONFIG_SND_MIA=y
CONFIG_SND_ECHO3G=y
CONFIG_SND_INDIGO=y
CONFIG_SND_INDIGOIO=y
CONFIG_SND_INDIGODJ=y
# CONFIG_SND_EMU10K1 is not set
CONFIG_SND_EMU10K1X=y
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
CONFIG_SND_HDSPM=y
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
CONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not set
CONFIG_SND_INTEL8X0M=y
CONFIG_SND_KORG1212=y
CONFIG_SND_MAESTRO3=y
CONFIG_SND_MIXART=y
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
CONFIG_SND_RIPTIDE=y
CONFIG_SND_RME32=y
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
CONFIG_SND_VIA82XX_MODEM=y
CONFIG_SND_VIRTUOSO=y
CONFIG_SND_VX222=y
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_PPC is not set
# CONFIG_SND_SPI is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
CONFIG_SND_PDAUDIOCF=y
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=y
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_MMC_BLOCK is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_WBSD=y
# CONFIG_MMC_SPI is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_WM8350=y
# CONFIG_LEDS_DA903X is not set
CONFIG_LEDS_DAC124S085=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_IPATH is not set
CONFIG_INFINIBAND_AMSO1100=y
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_PROC=y
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_TWL4030 is not set
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8581=y
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1305=y
# CONFIG_RTC_DRV_DS1390 is not set
CONFIG_RTC_DRV_MAX6902=y
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_DS3234=y
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_V3020=y
CONFIG_RTC_DRV_WM8350=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PPC=y
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_SMX is not set
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
#
# Caches
#
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_VMCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_HFSPLUS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
# CONFIG_JFFS2_ZLIB is not set
CONFIG_JFFS2_LZO=y
# CONFIG_JFFS2_RTIME is not set
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_ROMFS_FS=y
CONFIG_SYSV_FS=y
# CONFIG_UFS_FS is not set
CONFIG_EXOFS_FS=y
# CONFIG_EXOFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG2=y
# CONFIG_CIFS_DFS_UPCALL is not set
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
# CONFIG_NCPFS_OS2_NS is not set
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLQB_DEBUG is not set
CONFIG_SLQB_SYSFS=y
CONFIG_SLQB_STATS=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_WRITECOUNT=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_BOOT_TRACER=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_TRACING_BRANCHES=y
CONFIG_BRANCH_TRACER=y
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
CONFIG_WORKQUEUE_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_BUILD_DOCSRC=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_KOBJECT=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_HCALL_STATS=y
CONFIG_CODE_PATCHING_SELFTEST=y
CONFIG_FTR_FIXUP_SELFTEST=y
CONFIG_MSI_BITMAP_SELFTEST=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_IRQSTACKS=y
CONFIG_VIRQ_DEBUG=y
# CONFIG_BOOTX_TEXT is not set
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_PPC_EARLY_DEBUG_LPAR=y
# CONFIG_PPC_EARLY_DEBUG_G5 is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
# CONFIG_SECURITY_SELINUX_DEVELOP is not set
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_KEYS_COMPAT=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
# CONFIG_PPC_CLOCK is not set
CONFIG_VIRTUALIZATION=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_BALLOON=y
^ permalink raw reply
* support IRQ from GPIO trough OF and GPIOLIB
From: Henk Stegeman @ 2009-03-05 11:15 UTC (permalink / raw)
To: linuxppc-dev
Hello,
I have an SPI device that sends an IRQ to the CPU (MPC5200) via GPIO (GPT6):
gpt6: timer@660 { // General Purpose Timer GPT6 in GPIO mode for
SMC4000IO sample irq.
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
cell-index = <6>;
reg = <0x660 0x10>;
interrupts = <1 15 0>;
interrupt-parent = <&mpc5200_pic>;
gpio-controller;
#gpio-cells = <2>;
};
spi@f00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
interrupt-parent = <&mpc5200_pic>;
gpios = <&gpt4 0 0>;
io-controller@0 {
compatible = "microkey,smc4000io";
linux,modalias = "of_smc4000io";
spi-max-frequency = <1000000>;
spi-cpha;
reg = <0>;
// gpios: first is IRQ to cpu
gpios = <&gpt6 0 0>;
word-delay-us = <0>;
};
};
I've got it working for a mm_gpio, but it's probably not the right
approach, I have the following questions to get to the right solution:
- Should gpiolib's gpio_to_irq function indeed return the IRQ that was
specified at the GPIO by the DTS (interrupts = <1 15 0>)?
The effect is that if the IRQ is not specified in the DTS the
gpio_to_irq returns NO_IRQ.
(On the MPC5200 the IRQ is fixed for GPT6, so instead the cell-index
could also be used to return a gpio's IRQ)
- If a GPIO controller supports several GPIOs but one IRQ, is it
defined what gpio_to_irq should return?
- Is it okay for gpio_to_irq to return NO_IRQ? (returned by
irq_of_parse_and_map) if irq is not defined?
Henk.
diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c
index 6eea601..81927d7 100644
--- a/drivers/of/gpio.c
+++ b/drivers/of/gpio.c
@@ -150,6 +150,17 @@ int of_gpio_simple_xlate(struct of_gpio_chip
*of_gc, struct device_node *np,
}
EXPORT_SYMBOL(of_gpio_simple_xlate);
+static int of_mm_gpio_to_irq(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+
+ of_gc = container_of(gc, struct of_gpio_chip, gc);
+ mm_gc = container_of(of_gc, struct of_mm_gpio_chip, of_gc);
+ return mm_gc->irq;
+
+}
+
/**
* of_mm_gpiochip_add - Add memory mapped GPIO chip (bank)
* @np: device node of the GPIO chip
@@ -188,6 +199,9 @@ int of_mm_gpiochip_add(struct device_node *np,
gc->base = -1;
+ mm_gc->irq = irq_of_parse_and_map(np, 0);
+ gc->to_irq = of_mm_gpio_to_irq;
+
if (!of_gc->xlate)
of_gc->xlate = of_gpio_simple_xlate;
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
index fc2472c..17fe9ed 100644
--- a/include/linux/of_gpio.h
+++ b/include/linux/of_gpio.h
@@ -54,6 +54,7 @@ struct of_mm_gpio_chip {
struct of_gpio_chip of_gc;
void (*save_regs)(struct of_mm_gpio_chip *mm_gc);
void __iomem *regs;
+ int irq;
};
static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc)
^ permalink raw reply related
* Re: support IRQ from GPIO trough OF and GPIOLIB
From: Henk Stegeman @ 2009-03-05 11:20 UTC (permalink / raw)
To: linuxppc-dev
In-Reply-To: <ae4f76fd0903050315g571b327drc069938c0226f6a3@mail.gmail.com>
I forgot to include my changes in arch/powerpc/include/asm/gpio.h:
diff --git a/arch/powerpc/include/asm/gpio.h b/arch/powerpc/include/asm/gpi=
o.h
index ea04632..38762ed 100644
--- a/arch/powerpc/include/asm/gpio.h
+++ b/arch/powerpc/include/asm/gpio.h
@@ -38,12 +38,9 @@ static inline int gpio_cansleep(unsigned int gpio)
return __gpio_cansleep(gpio);
}
-/*
- * Not implemented, yet.
- */
static inline int gpio_to_irq(unsigned int gpio)
{
- return -ENOSYS;
+ return __gpio_to_irq(gpio);
}
static inline int irq_to_gpio(unsigned int irq)
On Thu, Mar 5, 2009 at 12:15 PM, Henk Stegeman <henk.stegeman@gmail.com> wr=
ote:
> Hello,
>
> I have an SPI device that sends an IRQ to the CPU (MPC5200) via GPIO (GPT=
6):
>
> gpt6: timer@660 { =A0 =A0 =A0 // General Purpose Timer GPT6 in GPIO mode =
for
> SMC4000IO sample irq.
> =A0 =A0 =A0 =A0compatible =3D "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gp=
io";
> =A0 =A0 =A0 =A0cell-index =3D <6>;
> =A0 =A0 =A0 =A0reg =3D <0x660 0x10>;
> =A0 =A0 =A0 =A0interrupts =3D <1 15 0>;
> =A0 =A0 =A0 =A0interrupt-parent =3D <&mpc5200_pic>;
> =A0 =A0 =A0 =A0gpio-controller;
> =A0 =A0 =A0 =A0#gpio-cells =3D <2>;
> };
>
> spi@f00 {
> =A0 =A0 =A0 =A0#address-cells =3D <1>;
> =A0 =A0 =A0 =A0#size-cells =3D <0>;
> =A0 =A0 =A0 =A0compatible =3D "fsl,mpc5200b-spi","fsl,mpc5200-spi";
> =A0 =A0 =A0 =A0reg =3D <0xf00 0x20>;
> =A0 =A0 =A0 =A0interrupts =3D <2 13 0 2 14 0>;
> =A0 =A0 =A0 =A0interrupt-parent =3D <&mpc5200_pic>;
> =A0 =A0 =A0 =A0gpios =3D <&gpt4 0 0>;
>
> =A0 =A0 =A0 =A0io-controller@0 {
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0compatible =3D "microkey,smc4000io";
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0linux,modalias =3D "of_smc4000io";
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0spi-max-frequency =3D <1000000>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0spi-cpha;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0reg =3D <0>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0// gpios: first is IRQ to cpu
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0gpios =3D <&gpt6 0 0>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0word-delay-us =3D <0>;
> =A0 =A0 =A0 =A0};
> };
>
> I've got it working for a mm_gpio, but it's probably not the right
> approach, I have the following questions to get to the right solution:
> - Should gpiolib's gpio_to_irq function indeed return the IRQ that was
> specified at the GPIO by the DTS (interrupts =3D <1 15 0>)?
> =A0The effect is that if the IRQ is not specified in the DTS the
> gpio_to_irq returns NO_IRQ.
> =A0(On the MPC5200 the IRQ is fixed for GPT6, so instead the cell-index
> could also be used to return a gpio's IRQ)
> - If a GPIO controller supports several GPIOs but one IRQ, is it
> defined what gpio_to_irq should return?
> - Is it okay for gpio_to_irq to return NO_IRQ? =A0(returned by
> irq_of_parse_and_map) if irq is not defined?
>
>
> Henk.
>
> diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c
> index 6eea601..81927d7 100644
> --- a/drivers/of/gpio.c
> +++ b/drivers/of/gpio.c
> @@ -150,6 +150,17 @@ int of_gpio_simple_xlate(struct of_gpio_chip
> *of_gc, struct device_node *np,
> =A0}
> =A0EXPORT_SYMBOL(of_gpio_simple_xlate);
>
> +static int of_mm_gpio_to_irq(struct gpio_chip *gc, unsigned int gpio)
> +{
> + =A0 =A0 =A0 struct of_mm_gpio_chip *mm_gc;
> + =A0 =A0 =A0 struct of_gpio_chip *of_gc;
> +
> + =A0 =A0 =A0 of_gc =3D container_of(gc, struct of_gpio_chip, gc);
> + =A0 =A0 =A0 mm_gc =3D container_of(of_gc, struct of_mm_gpio_chip, of_gc=
);
> + =A0 =A0 =A0 return mm_gc->irq;
> +
> +}
> +
> =A0/**
> =A0* of_mm_gpiochip_add - Add memory mapped GPIO chip (bank)
> =A0* @np: =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0device node of the GPIO chip
> @@ -188,6 +199,9 @@ int of_mm_gpiochip_add(struct device_node *np,
>
> =A0 =A0 =A0 =A0gc->base =3D -1;
>
> + =A0 =A0 =A0 mm_gc->irq =3D irq_of_parse_and_map(np, 0);
> + =A0 =A0 =A0 gc->to_irq =3D of_mm_gpio_to_irq;
> +
> =A0 =A0 =A0 =A0if (!of_gc->xlate)
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0of_gc->xlate =3D of_gpio_simple_xlate;
>
> diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
> index fc2472c..17fe9ed 100644
> --- a/include/linux/of_gpio.h
> +++ b/include/linux/of_gpio.h
> @@ -54,6 +54,7 @@ struct of_mm_gpio_chip {
> =A0 =A0 =A0 =A0struct of_gpio_chip of_gc;
> =A0 =A0 =A0 =A0void (*save_regs)(struct of_mm_gpio_chip *mm_gc);
> =A0 =A0 =A0 =A0void __iomem *regs;
> + =A0 =A0 =A0 int irq;
> =A0};
>
> =A0static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_c=
hip *gc)
>
^ permalink raw reply related
* Re: [PATCH/RFC] ps3/block: Add ps3vram-ng driver for accessing video RAM as block device
From: Jens Axboe @ 2009-03-05 11:09 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Arnd Bergmann, Linux Kernel Development, Jim Paris,
Linux/PPC Development, linux-mtd, Vivien Chappelier,
David Woodhouse, Cell Broadband Engine OSS Development
In-Reply-To: <alpine.LRH.2.00.0903051146440.2618@vixen.sonytel.be>
On Thu, Mar 05 2009, Geert Uytterhoeven wrote:
> Hi Jens,
>
> On Thu, 5 Mar 2009, Jens Axboe wrote:
> > On Wed, Mar 04 2009, Geert Uytterhoeven wrote:
> > > Below is the rewrite of the PS3 Video RAM Storage Driver as a plain block
> > > device, as requested by Arnd Bergmann.
> > >
> > > The MTD-based PS3 Video RAM Storage Driver was integrated into the mainline
> > > kernel in 2.6.29-rc1.
> > >
> > > Ideally, we think it would be best if the existing MTD-based ps3vram driver
> > > would be replaced by the new block-based ps3vram driver before 2.6.29 is
> > > released. This would relieve the burden of supporting two different swap space
> > > schemes on PS3 (swap on /dev/mtdblock0 vs. /dev/ps3vram) from the distro
> > > maintainer's shoulders, as in that case there would never have been a stable
> > > kernel version containing the MTD-based ps3vram driver.
> > >
> > > What do you think? If this is accepted, I'll submit a patch to remove the MTD
> > > ps3vram and add the new driver as ps3vram (instead of ps3vram-ng).
> > >
> > > Thanks for your (review and other) comments!
> >
> > I'd rewrite this as a ->make_request_fn handler instead. Then you can
> > get rid of the kernel thread. IOW, change
> >
> > queue = blk_init_queue(ps3vram_request, &priv->lock);
> >
> > to
> >
> > queue = blk_alloc_queue(GFP_KERNEL);
> > blk_queue_make_request(queue, ps3vram_make_request);
>
> Thanks, I didn't know that part...
>
> > Add error handling of course, and call blk_queue_max_*() to set your
> > limits for this device.
>
> I took out the blk_queue_max_*() calls (compared to ps3disk.c), as
> none of the limits apply, and the defaults are fine.
>
> Is that OK, or is it better to make it explicit?
I think it's always good to make it explicit. Plus for this case you
definitely need it, as blk_init_queue() wont do it for you anymore.
> > Then add a ps3vram_make_request() ala:
>
> > static void ps3vram_do_request(struct request_queue *q, struct bio *bio)
> > {
> > struct ps3_system_bus_device *dev = q->queuedata;
> > struct ps3vram_priv *priv = dev->core.driver_data;
> > int write, res, err = -EIO;
> > struct bio_vec *bv;
> > sector_t sector;
> > loff_t offset;
> > size_t len, retlen;
> > int i;
> >
> > write = bio_data_dir(bio) == WRITE;
> >
> > sector = bio->bi_sector;
> > bio_for_each_segment(bv, bio, i) {
> > char *ptr = page_address(bv->bv_page) + bv->bv_offset;
> >
> > len = bv->bv_len;
> > offset = sector << 9;
> >
> > if (write)
> > res = ps3vram_write(dev, offset, len, &retlen, ptr);
> > else
> > res = ps3vram_read(dev, offset, len, &retlen, ptr);
> >
> > if (res) {
> > dev_err(&dev->core, "%s failed\n", op);
> > goto out;
> > }
> >
> > if (retlen != len) {
> > dev_err(&dev->core, "Short %s\n", op);
> > goto out;
> > }
> > sector += (len >> 9);
> > }
> >
> > dev_dbg(&dev->core, "%s completed\n", op);
> > err = 0;
> > out:
> > bio_endio(bio, err);
> > }
> >
> > I just typed it here, so if it doesn't compile you get to keep the
> > pieces :-)
>
> OK, I'll give it a try...
>
> BTW, does this mean the `simple' way, which I used based on LDD3, is
> deprecated?
Depends.. It's obviously not a very effective approach, since you punt
to a thread for each request. But if you need the IO scheduler helping
you with merging and sorting (for a rotational device), it still has
some merit. For this particular case, the ->make_request_fn approach is
much better.
> > Since ps3 is very RAM limited, I didn't bother with any highmem mapping
> > for the bio, since I gather that isn't an issue on that platform. You
> > may want to detail that in a comment above the page_addres() thing at
> > the top of the loop, though.
>
> PS3 is ppc64, so no highmem. But I guess I best add the code for that anyway,
> in case people will copy the driver in the future (I remember receiving a
> similar comment for ps3disk).
I'd prefer just the comment, since you have to be able to handle
disabled interrupts on return from bvec_kmap_irq() if you use that. And
that would just complicate your driver, for something that you don't
need. So I'd put the comment in there stating why it's OK to just use
page_address() instead. If people copy-paste the code to some other
driver, then they will get the comment as well.
--
Jens Axboe
^ permalink raw reply
* Re: [PATCH/RFC] ps3/block: Add ps3vram-ng driver for accessing video RAM as block device
From: Geert Uytterhoeven @ 2009-03-05 10:50 UTC (permalink / raw)
To: Jens Axboe
Cc: Arnd Bergmann, Linux Kernel Development, Jim Paris,
Linux/PPC Development, linux-mtd, Vivien Chappelier,
David Woodhouse, Cell Broadband Engine OSS Development
In-Reply-To: <20090305083701.GQ11787@kernel.dk>
Hi Jens,
On Thu, 5 Mar 2009, Jens Axboe wrote:
> On Wed, Mar 04 2009, Geert Uytterhoeven wrote:
> > Below is the rewrite of the PS3 Video RAM Storage Driver as a plain block
> > device, as requested by Arnd Bergmann.
> >
> > The MTD-based PS3 Video RAM Storage Driver was integrated into the mainline
> > kernel in 2.6.29-rc1.
> >
> > Ideally, we think it would be best if the existing MTD-based ps3vram driver
> > would be replaced by the new block-based ps3vram driver before 2.6.29 is
> > released. This would relieve the burden of supporting two different swap space
> > schemes on PS3 (swap on /dev/mtdblock0 vs. /dev/ps3vram) from the distro
> > maintainer's shoulders, as in that case there would never have been a stable
> > kernel version containing the MTD-based ps3vram driver.
> >
> > What do you think? If this is accepted, I'll submit a patch to remove the MTD
> > ps3vram and add the new driver as ps3vram (instead of ps3vram-ng).
> >
> > Thanks for your (review and other) comments!
>
> I'd rewrite this as a ->make_request_fn handler instead. Then you can
> get rid of the kernel thread. IOW, change
>
> queue = blk_init_queue(ps3vram_request, &priv->lock);
>
> to
>
> queue = blk_alloc_queue(GFP_KERNEL);
> blk_queue_make_request(queue, ps3vram_make_request);
Thanks, I didn't know that part...
> Add error handling of course, and call blk_queue_max_*() to set your
> limits for this device.
I took out the blk_queue_max_*() calls (compared to ps3disk.c), as none of the
limits apply, and the defaults are fine.
Is that OK, or is it better to make it explicit?
> Then add a ps3vram_make_request() ala:
> static void ps3vram_do_request(struct request_queue *q, struct bio *bio)
> {
> struct ps3_system_bus_device *dev = q->queuedata;
> struct ps3vram_priv *priv = dev->core.driver_data;
> int write, res, err = -EIO;
> struct bio_vec *bv;
> sector_t sector;
> loff_t offset;
> size_t len, retlen;
> int i;
>
> write = bio_data_dir(bio) == WRITE;
>
> sector = bio->bi_sector;
> bio_for_each_segment(bv, bio, i) {
> char *ptr = page_address(bv->bv_page) + bv->bv_offset;
>
> len = bv->bv_len;
> offset = sector << 9;
>
> if (write)
> res = ps3vram_write(dev, offset, len, &retlen, ptr);
> else
> res = ps3vram_read(dev, offset, len, &retlen, ptr);
>
> if (res) {
> dev_err(&dev->core, "%s failed\n", op);
> goto out;
> }
>
> if (retlen != len) {
> dev_err(&dev->core, "Short %s\n", op);
> goto out;
> }
> sector += (len >> 9);
> }
>
> dev_dbg(&dev->core, "%s completed\n", op);
> err = 0;
> out:
> bio_endio(bio, err);
> }
>
> I just typed it here, so if it doesn't compile you get to keep the
> pieces :-)
OK, I'll give it a try...
BTW, does this mean the `simple' way, which I used based on LDD3, is
deprecated?
> Since ps3 is very RAM limited, I didn't bother with any highmem mapping
> for the bio, since I gather that isn't an issue on that platform. You
> may want to detail that in a comment above the page_addres() thing at
> the top of the loop, though.
PS3 is ppc64, so no highmem. But I guess I best add the code for that anyway,
in case people will copy the driver in the future (I remember receiving a
similar comment for ps3disk).
Thanks for your comments!
With kind regards,
Geert Uytterhoeven
Software Architect
Sony Techsoft Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium
Phone: +32 (0)2 700 8453
Fax: +32 (0)2 700 8622
E-mail: Geert.Uytterhoeven@sonycom.com
Internet: http://www.sony-europe.com/
A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010
^ permalink raw reply
* Re: [PATCH/RFC] ps3/block: Add ps3vram-ng driver for accessing video RAM as block device
From: Geert Uytterhoeven @ 2009-03-05 10:24 UTC (permalink / raw)
To: Olaf Hering
Cc: Jens Axboe, Arnd Bergmann, Linux Kernel Development, Jim Paris,
Linux/PPC Development, linux-mtd, Vivien Chappelier,
David Woodhouse, Cell Broadband Engine OSS Development
In-Reply-To: <alpine.LRH.2.00.0903050856490.26681@vixen.sonytel.be>
On Thu, 5 Mar 2009, Geert Uytterhoeven wrote:
> On Thu, 5 Mar 2009, Olaf Hering wrote:
> > I see our old mtddriver does not have modalias support for autoloading.
>
> You forgot to backport commit 0a2d15b928e0b1673d4ed5f48d95af211b6fcc06
> ("mtd/ps3vram: Add modalias support to the ps3vram driver") to the openSuSE
> tree?
Or do you mean that udev doesn't load mtdblock automatically?
With kind regards,
Geert Uytterhoeven
Software Architect
Sony Techsoft Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium
Phone: +32 (0)2 700 8453
Fax: +32 (0)2 700 8622
E-mail: Geert.Uytterhoeven@sonycom.com
Internet: http://www.sony-europe.com/
A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010
^ permalink raw reply
* On LINUX FOR POWERPC EMBEDDED PPC4XX git tree
From: Cheng Renquan @ 2009-03-05 8:45 UTC (permalink / raw)
To: Josh Boyer; +Cc: linuxppc-dev
Hello Josh,
Today I want to check if there are new changes from your git tree,
I read it from the MAINTAINERS file, but git told it can't find that
tree, then I go to the web,
http://www.kernel.org/pub/scm/linux/kernel/git/jwboyer/
and found your tree's name has changed,
However, please remember also change the MAINTAINERS file,
Thanks,
diff --git a/MAINTAINERS b/MAINTAINERS
index 59fd2d1..db268cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2716,7 +2716,7 @@ P: Matt Porter
M: mporter@kernel.crashing.org
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
-T: git kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc.git
+T: git kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
S: Maintained
LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
--=20
Cheng Renquan (=E7=A8=8B=E4=BB=BB=E5=85=A8), from Shenzhen, China
Joe DiMaggio - "Pair up in threes."
^ permalink raw reply related
* Re: [PATCH/RFC] ps3/block: Add ps3vram-ng driver for accessing video RAM as block device
From: Jens Axboe @ 2009-03-05 8:37 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Arnd Bergmann, Linux Kernel Development, Jim Paris,
Linux/PPC Development, linux-mtd, Vivien Chappelier,
David Woodhouse, Cell Broadband Engine OSS Development
In-Reply-To: <alpine.LRH.2.00.0903041444300.32279@vixen.sonytel.be>
On Wed, Mar 04 2009, Geert Uytterhoeven wrote:
> Hi,
>
> Below is the rewrite of the PS3 Video RAM Storage Driver as a plain block
> device, as requested by Arnd Bergmann.
>
> The MTD-based PS3 Video RAM Storage Driver was integrated into the mainline
> kernel in 2.6.29-rc1.
>
> Ideally, we think it would be best if the existing MTD-based ps3vram driver
> would be replaced by the new block-based ps3vram driver before 2.6.29 is
> released. This would relieve the burden of supporting two different swap space
> schemes on PS3 (swap on /dev/mtdblock0 vs. /dev/ps3vram) from the distro
> maintainer's shoulders, as in that case there would never have been a stable
> kernel version containing the MTD-based ps3vram driver.
>
> What do you think? If this is accepted, I'll submit a patch to remove the MTD
> ps3vram and add the new driver as ps3vram (instead of ps3vram-ng).
>
> Thanks for your (review and other) comments!
I'd rewrite this as a ->make_request_fn handler instead. Then you can
get rid of the kernel thread. IOW, change
queue = blk_init_queue(ps3vram_request, &priv->lock);
to
queue = blk_alloc_queue(GFP_KERNEL);
blk_queue_make_request(queue, ps3vram_make_request);
Add error handling of course, and call blk_queue_max_*() to set your
limits for this device. Then add a ps3vram_make_request() ala:
static void ps3vram_do_request(struct request_queue *q, struct bio *bio)
{
struct ps3_system_bus_device *dev = q->queuedata;
struct ps3vram_priv *priv = dev->core.driver_data;
int write, res, err = -EIO;
struct bio_vec *bv;
sector_t sector;
loff_t offset;
size_t len, retlen;
int i;
write = bio_data_dir(bio) == WRITE;
sector = bio->bi_sector;
bio_for_each_segment(bv, bio, i) {
char *ptr = page_address(bv->bv_page) + bv->bv_offset;
len = bv->bv_len;
offset = sector << 9;
if (write)
res = ps3vram_write(dev, offset, len, &retlen, ptr);
else
res = ps3vram_read(dev, offset, len, &retlen, ptr);
if (res) {
dev_err(&dev->core, "%s failed\n", op);
goto out;
}
if (retlen != len) {
dev_err(&dev->core, "Short %s\n", op);
goto out;
}
sector += (len >> 9);
}
dev_dbg(&dev->core, "%s completed\n", op);
err = 0;
out:
bio_endio(bio, err);
}
I just typed it here, so if it doesn't compile you get to keep the
pieces :-)
Since ps3 is very RAM limited, I didn't bother with any highmem mapping
for the bio, since I gather that isn't an issue on that platform. You
may want to detail that in a comment above the page_addres() thing at
the top of the loop, though.
--
Jens Axboe
^ permalink raw reply
* Re: [PATCH/RFC] ps3/block: Add ps3vram-ng driver for accessing video RAM as block device
From: Geert Uytterhoeven @ 2009-03-05 7:59 UTC (permalink / raw)
To: Olaf Hering
Cc: Jens Axboe, Arnd Bergmann, Linux Kernel Development, Jim Paris,
Linux/PPC Development, linux-mtd, Vivien Chappelier,
David Woodhouse, Cell Broadband Engine OSS Development
In-Reply-To: <AA44F8E7-5FBC-4378-A86D-C094ECABD625@aepfle.de>
On Thu, 5 Mar 2009, Olaf Hering wrote:
> Am 04.03.2009 um 14:57 schrieb Geert Uytterhoeven:
> >Ideally, we think it would be best if the existing MTD-based ps3vram driver
> >would be replaced by the new block-based ps3vram driver before 2.6.29 is
> >released. This would relieve the burden of supporting two different swap
> >space
> >schemes on PS3 (swap on /dev/mtdblock0 vs. /dev/ps3vram) from the distro
> >maintainer's shoulders, as in that case there would never have been a stable
> >kernel version containing the MTD-based ps3vram driver.
>
> openSuSE already ships with the ps3vram driver since a two releases.
> A simple name based udev rule could symlink ps3vram to mtdblock0, so an
> upgrade
> will not break existing setups.
OK.
> >+obj-$(CONFIG_PS3_VRAM) += ps3vram_ng.o
>
> Please give the driver the obvious name "ps3vram", that way upgrading will be
> smooth.
Sure, as I said:
| I'll submit a patch to remove the MTD
| ps3vram and add the new driver as ps3vram (instead of ps3vram-ng).
> I see our old mtddriver does not have modalias support for autoloading.
You forgot to backport commit 0a2d15b928e0b1673d4ed5f48d95af211b6fcc06
("mtd/ps3vram: Add modalias support to the ps3vram driver") to the openSuSE
tree?
> Hopefully the new driver has this feature.
Yes, it has.
With kind regards,
Geert Uytterhoeven
Software Architect
Sony Techsoft Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium
Phone: +32 (0)2 700 8453
Fax: +32 (0)2 700 8622
E-mail: Geert.Uytterhoeven@sonycom.com
Internet: http://www.sony-europe.com/
A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010
^ permalink raw reply
* Re: PHY not found after migration of gianfar driver to an of_platform_driver
From: Michael Guntsche @ 2009-03-05 7:41 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev
In-Reply-To: <fa686aa40903040757n3992fec4jb6f3b75396af2958@mail.gmail.com>
On Wed, 4 Mar 2009 08:57:59 -0700, Grant Likely <grant.likely@secretlab.ca>
wrote:
> You might be able to use of_attach_node() & prom_add_property() to
> modify the tree, but I've never done it myself. Give it a try and
> tell me if it works. :-)
>
Hello Grant,
I made some progress in this area, but I have now hit a problem I do not
know how to solve.
Taking code from the iseries/vio.c files I am able to add properties with
add_string_property and add_raw_property.
The problem I have is adding properties like
reg = <0x2520 0x20>
I know how to add a property
reg = <0x2520>
but I do not know what data structure to pass to add_raw_property to add
two numbers there.
Kind regards,
Michael
^ permalink raw reply
* Re: [PATCH/RFC] ps3/block: Add ps3vram-ng driver for accessing video RAM as block device
From: Olaf Hering @ 2009-03-05 7:17 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Jens Axboe, Arnd Bergmann, Linux Kernel Development, Jim Paris,
Linux/PPC Development, linux-mtd, Vivien Chappelier,
David Woodhouse, Cell Broadband Engine OSS Development
In-Reply-To: <alpine.LRH.2.00.0903041444300.32279@vixen.sonytel.be>
Am 04.03.2009 um 14:57 schrieb Geert Uytterhoeven:
> Ideally, we think it would be best if the existing MTD-based ps3vram
> driver
> would be replaced by the new block-based ps3vram driver before
> 2.6.29 is
> released. This would relieve the burden of supporting two different
> swap space
> schemes on PS3 (swap on /dev/mtdblock0 vs. /dev/ps3vram) from the
> distro
> maintainer's shoulders, as in that case there would never have been
> a stable
> kernel version containing the MTD-based ps3vram driver.
openSuSE already ships with the ps3vram driver since a two releases.
A simple name based udev rule could symlink ps3vram to mtdblock0, so
an upgrade
will not break existing setups.
> +obj-$(CONFIG_PS3_VRAM) += ps3vram_ng.o
Please give the driver the obvious name "ps3vram", that way upgrading
will be smooth.
I see our old mtddriver does not have modalias support for autoloading.
Hopefully the new driver has this feature.
Olaf
^ permalink raw reply
* Re: [PATCH] powerpc/cell: Only build Axon MSI driver for IBM Cell Blades
From: Olof Johansson @ 2009-03-05 7:13 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev
In-Reply-To: <e9c405aaec255c2a3d34209fc35ae093fcae8efc.1236228043.git.michael@ellerman.id.au>
On Thu, Mar 05, 2009 at 03:41:41PM +1100, Michael Ellerman wrote:
> The hardware is only present on those machines, and the driver
> depends on infrastructure which is selected by the Kconfig for
> cell blades.
Wouldn't it make more sense to make a separate (AXON_MSI) config option
depend on PPC_IBM_CELL_BLADE?
-Olof
> --- a/arch/powerpc/platforms/cell/Makefile
> +++ b/arch/powerpc/platforms/cell/Makefile
> @@ -28,7 +28,9 @@ obj-$(CONFIG_SPU_BASE) += spu_callbacks.o spu_base.o \
> $(spu-manage-y) \
> spufs/
>
> +ifeq ($(CONFIG_PPC_IBM_CELL_BLADE),y)
> obj-$(CONFIG_PCI_MSI) += axon_msi.o
> +endif
>
> # qpace setup
> obj-$(CONFIG_PPC_CELL_QPACE) += qpace_setup.o
^ permalink raw reply
* Re: [PATCH/RFC] ps3/block: Add ps3vram-ng driver for accessing video RAM as block device
From: Jens Axboe @ 2009-03-05 6:54 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Arnd Bergmann, Linus Torvalds, Linux Kernel Development,
Jim Paris, Linux/PPC Development, linux-mtd, Geert Uytterhoeven,
Vivien Chappelier, David Woodhouse,
Cell Broadband Engine OSS Development
In-Reply-To: <1236209255.6696.75.camel@pasglop>
On Thu, Mar 05 2009, Benjamin Herrenschmidt wrote:
> On Wed, 2009-03-04 at 14:57 +0100, Geert Uytterhoeven wrote:
> > Hi,
> >
> > Below is the rewrite of the PS3 Video RAM Storage Driver as a plain block
> > device, as requested by Arnd Bergmann.
> >
> > The MTD-based PS3 Video RAM Storage Driver was integrated into the mainline
> > kernel in 2.6.29-rc1.
> >
> > Ideally, we think it would be best if the existing MTD-based ps3vram driver
> > would be replaced by the new block-based ps3vram driver before 2.6.29 is
> > released. This would relieve the burden of supporting two different swap space
> > schemes on PS3 (swap on /dev/mtdblock0 vs. /dev/ps3vram) from the distro
> > maintainer's shoulders, as in that case there would never have been a stable
> > kernel version containing the MTD-based ps3vram driver.
>
> This is very very very late ... we are at rc7, probably one rc before
> final... as much as I like integrating drivers later, I'll ask Linus
> opinion on this one.
>
> Linus ? What do you reckon ? Maybe a better option is just to remove
> ps3nvram from .29 and merge the new one in .30 ?
It's an isolated driver for a special purpose platform, I would have
zero problems merging it :-)
--
Jens Axboe
^ permalink raw reply
* GPIO and SPI on CPM2 (8260)?
From: Daniel Ng @ 2009-03-05 6:53 UTC (permalink / raw)
To: linuxppc-dev
Hi,
I'm trying to get GPIO and SPI working on my 8272-based board.
Would anyone know if the following exists?-
1) SPI driver for CPM2-based platforms?
2) GPIO driver for CPM2-based platforms?
Also, has anyone used the gpiolib functionality on the CPM2-based platforms?
Cheers,
Daniel
^ permalink raw reply
* [PATCH] powerpc: Fix mpc52xx_gpt when sysfs is not configured
From: Michael Neuling @ 2009-03-05 6:03 UTC (permalink / raw)
To: grant.likely, Wolfram Sang; +Cc: linuxppc-dev
mpc52xx_gpt_create_attribs is missing a parameter name and shouldn't
return anything since it's void.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
This is against benh's testing tree
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: clone1/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
===================================================================
--- clone1.orig/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ clone1/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -370,7 +370,7 @@ static void mpc52xx_gpt_create_attribs(s
}
#else /* defined(CONFIG_SYSFS) */
-static void mpc52xx_gpt_create_attribs(struct mpc52xx_gpt_priv *) { return 0; }
+static void mpc52xx_gpt_create_attribs(struct mpc52xx_gpt_priv *gpt) {}
#endif /* defined(CONFIG_SYSFS) */
/* ---------------------------------------------------------------------
^ permalink raw reply
* [RFC/PATCH] Print linux_banner in prom_init
From: Michael Ellerman @ 2009-03-05 5:02 UTC (permalink / raw)
To: linuxppc-dev
So at least you can see what kernel you're booting if you die
before the kernel prints it mid-way through start_kernel().
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
---
arch/powerpc/kernel/prom_init.c | 2 ++
arch/powerpc/kernel/prom_init_check.sh | 2 +-
2 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 7f1b33d..4d5ebb4 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2283,6 +2283,8 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
*/
prom_init_stdout();
+ prom_printf("Preparing to boot %s", PTRRELOC((char *)linux_banner));
+
/*
* Get default machine type. At this point, we do not differentiate
* between pSeries SMP and pSeries LPAR
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index ea3a2ec..1ac136b 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -20,7 +20,7 @@ WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush
_end enter_prom memcpy memset reloc_offset __secondary_hold
__secondary_hold_acknowledge __secondary_hold_spinloop __start
strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2 kernstart_addr memstart_addr"
+reloc_got2 kernstart_addr memstart_addr linux_banner"
NM="$1"
OBJ="$2"
--
1.5.6.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox