* [PATCH 02/04] ARIA: add device tree source file
From: Wolfgang Denk @ 2009-05-06 20:20 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Andrea Scian, Wolfgang Denk
In-Reply-To: <1241641262-5202-1-git-send-email-wd@denx.de>
ARIA is a MPC5121 based COM Express module by Dave/DENX.
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: John Rigby <jcrigby@gmail.com>
---
arch/powerpc/boot/dts/aria.dts | 410 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 410 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/aria.dts
diff --git a/arch/powerpc/boot/dts/aria.dts b/arch/powerpc/boot/dts/aria.dts
new file mode 100644
index 0000000..6c6b5e4
--- /dev/null
+++ b/arch/powerpc/boot/dts/aria.dts
@@ -0,0 +1,407 @@
+/*
+ * Aria Device Tree Source
+ *
+ * Copyright 2009 Dave Srl www.dave.eu
+ * Copyright 2009 Wolfgang Denk <wd@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "aria";
+ compatible = "davedenx,aria";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+
+ pci = &pci;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5121@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <0x20>; // 32 bytes
+ i-cache-line-size = <0x20>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
+ //bus-frequency = <198000000>; // 198 MHz csb bus
+ //clock-frequency = <396000000>; // 396 MHz ppc core
+ bus-frequency = <158000000>;
+ clock-frequency = <316000000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; // 256MB at 0
+ };
+
+ mbx@20000000 {
+ device_type = "mbx";
+ compatible = "fsl,mpc5121-mbx";
+ reg = <0x20000000 0x4000>;
+ interrupts = <66 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ sram@30000000 {
+ compatible = "fsl,mpc5121-sram";
+ reg = <0x30000000 0x20000>; // 128K at 0x30000000
+ };
+
+ nfc@40000000 {
+ //compatible = "fsl,mpc5121rev2-nfc";
+ compatible = "fsl,mpc5121-nfc";
+ reg = <0x40000000 0x100000>; // 1M at 0x40000000
+ interrupts = <6 8>;
+ interrupt-parent = < &ipic >;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ write-size = <2048>;
+ spare-size = <64>;
+ chips = <1>;
+ nand@0 {
+ label = "nand";
+ reg = <0x00000000 0x08000000>; // 128 MB
+ };
+ };
+
+ localbus@80000020 {
+ compatible = "fsl,mpc5121-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x80000020 0x40>;
+
+ ranges = <0x0 0x0 0xF8000000 0x08000000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0x0 0x8000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ device-width = <2>;
+ partition@0 {
+ label = "user";
+ reg = <0x00000000 0x07000000>; // 112 MiB for user data
+ };
+ partition@07000000 {
+ label = "rootfs";
+ reg = <0x07000000 0x00c00000>; // 12 MiB for root file system
+ };
+ partition@07c00000 {
+ label = "kernel";
+ reg = <0x07c00000 0x00300000>; // 3 MiB for kernel
+ };
+ partition@07f00000 {
+ label = "u-boot";
+ reg = <0x07f00000 0x000c0000>; // 768 KiB for u-boot w/ env
+ read-only;
+ };
+ partition@07fc0000 {
+ label = "device-tree";
+ reg = <0x07fc0000 0x00040000>; // 256 KiB for device tree
+ };
+ };
+ };
+
+ soc@80000000 {
+ compatible = "fsl,mpc5121-immr";
+ device_type = "soc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ ranges = <0x0 0x80000000 0x400000>;
+ reg = <0x80000000 0x400000>;
+ bus-frequency = <66000000>; // 66 MHz ips bus
+
+
+ // IPIC
+ // interrupts cell = <intr #, sense>
+ // sense values match linux IORESOURCE_IRQ_* defines:
+ // sense == 8: Level, low assertion
+ // sense == 2: Edge, high-to-low change
+ //
+ ipic: interrupt-controller@c00 {
+ compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0xc00 0x100>;
+ };
+
+ rtc@a00 { // Real time clock
+ compatible = "fsl,mpc5121-rtc";
+ reg = <0xa00 0x100>;
+ interrupts = <79 0x8 80 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ reset@e00 { // Reset module
+ compatible = "fsl,mpc5121-reset";
+ reg = <0xe00 0x100>;
+ };
+
+ clock@f00 { // Clock control
+ compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock";
+ reg = <0xf00 0x100>;
+ };
+
+ pmc@1000{ //Power Management Controller
+ compatible = "fsl,mpc5121-pmc";
+ reg = <0x1000 0x100>;
+ interrupts = <83 0x2>;
+ interrupt-parent = < &ipic >;
+ };
+
+ gpio@1100 {
+ compatible = "fsl,mpc5121-gpio";
+ reg = <0x1100 0x100>;
+ interrupts = <78 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ mscan@1300 {
+ compatible = "fsl,mpc5121-mscan";
+ cell-index = <0>;
+ interrupts = <12 0x8>;
+ interrupt-parent = < &ipic >;
+ reg = <0x1300 0x80>;
+ };
+
+ mscan@1380 {
+ compatible = "fsl,mpc5121-mscan";
+ cell-index = <1>;
+ interrupts = <13 0x8>;
+ interrupt-parent = < &ipic >;
+ reg = <0x1380 0x80>;
+ };
+
+ // this is here for reference only
+// sdhc@1500 {
+// compatible = "fsl,mpc5121-sdhc";
+// interrupts = <8 0x8>;
+// interrupt-parent = < &ipic >;
+// reg = <0x1500 0x100>;
+// };
+
+ i2c@1700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ cell-index = <0>;
+ reg = <0x1700 0x20>;
+ interrupts = <9 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl5200-clocking;
+
+ rtc@68 {
+ compatible = "stm,m41t80";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@1720 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ cell-index = <1>;
+ reg = <0x1720 0x20>;
+ interrupts = <10 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl5200-clocking;
+ };
+
+ i2c@1740 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ cell-index = <2>;
+ reg = <0x1740 0x20>;
+ interrupts = <11 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl5200-clocking;
+ };
+
+ i2ccontrol@1760 {
+ compatible = "fsl,mpc5121-i2c-ctrl";
+ reg = <0x1760 0x8>;
+ };
+
+ axe@2000 {
+ compatible = "fsl,mpc5121-axe";
+ reg = <0x2000 0x100>;
+ interrupts = <42 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ diu@2100 {
+ device_type = "display";
+ compatible = "fsl-diu";
+ reg = <0x2100 0x100>;
+ interrupts = <64 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ mdio@2800 {
+ device_type = "mdio";
+ compatible = "fsl,mpc5121-fec-mdio";
+ reg = <0x2800 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy: ethernet-phy@0 {
+ reg = <23>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet: ethernet@2800 {
+ device_type = "network";
+ compatible = "fsl,mpc5121-fec";
+ reg = <0x2800 0x800>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <4 0x8>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy >;
+ fsl,align-tx-packets = <4>;
+ };
+
+ // 5121e has two dr usb modules
+ // We use only USB0
+
+ // USB1 using external ULPI PHY
+ //usb@3000 {
+ // device_type = "usb";
+ // compatible = "fsl-usb2-dr";
+ // reg = <0x3000 0x1000>;
+ // #address-cells = <1>;
+ // #size-cells = <0>;
+ // interrupt-parent = < &ipic >;
+ // interrupts = <43 0x8>;
+ // dr_mode = "otg";
+ // phy_type = "ulpi";
+ //};
+
+ // USB0 using internal UTMI PHY
+ usb@4000 {
+ device_type = "usb";
+ compatible = "fsl-usb2-dr";
+ reg = <0x4000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = < &ipic >;
+ interrupts = <44 0x8>;
+ dr_mode = "host";
+ phy_type = "utmi_wide";
+ //port0;
+ };
+
+ // IO control
+ ioctl@a000 {
+ compatible = "fsl,mpc5121-ioctl";
+ reg = <0xA000 0x1000>;
+ };
+
+ pata@10200 {
+ compatible = "fsl,mpc5121-pata";
+ reg = <0x10200 0x100>;
+ interrupts = <5 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ // 512x PSCs are not 52xx PSCs compatible
+ // PSC3 serial port A aka ttyPSC0
+ serial0: serial@11300 {
+ device_type = "serial";
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+ // Logical port assignment needed until driver
+ // learns to use aliases
+ port-number = <0>;
+ cell-index = <3>;
+ reg = <0x11300 0x100>;
+ interrupts = <40 0x8 71 0x8>;
+ interrupt-parent = < &ipic >;
+ rx-fifo-size = <16>;
+ tx-fifo-size = <16>;
+ nodcd;
+ };
+
+ // PSC4 serial port B aka ttyPSC1
+ serial1: serial@11400 {
+ device_type = "serial";
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+ // Logical port assignment needed until driver
+ // learns to use aliases
+ port-number = <1>;
+ cell-index = <4>;
+ reg = <0x11400 0x100>;
+ interrupts = <40 0x8 32 0x8>;
+ interrupt-parent = < &ipic >;
+ rx-fifo-size = <16>;
+ tx-fifo-size = <16>;
+ nodcd;
+ };
+
+ // PSC5 in ac97 mode
+ ac97@11500 {
+ device_type = "sound";
+ compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
+ cell-index = <5>;
+ reg = <0x11500 0x100>;
+ interrupts = <40 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl,mode = "ac97-slave";
+ rx-fifo-size = <384>;
+ tx-fifo-size = <384>;
+ };
+
+ pscfifo@11f00 {
+ compatible = "fsl,mpc5121-psc-fifo";
+ reg = <0x11f00 0x100>;
+ interrupts = <40 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ dma@14000 {
+ compatible = "mpc512x-dma";
+ reg = <0x14000 0x1800>;
+ interrupts = <65 0x8>;
+ interrupt-parent = < &ipic >;
+ };
+
+ };
+
+ pci: pci@80008500 {
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ >;
+ interrupt-parent = < &ipic >;
+ interrupts = <1 0x8>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+ clock-frequency = <66666666>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x80008500 0x100>;
+ compatible = "fsl,mpc5121-pci";
+ device_type = "pci";
+ };
+};
--
1.6.0.6
^ permalink raw reply related
* [PATCH 03/04] mpc5121: add support for ARIA board
From: Wolfgang Denk @ 2009-05-06 20:21 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Wolfgang Denk
In-Reply-To: <1241641262-5202-1-git-send-email-wd@denx.de>
ARIA is a MPC5121E based COM Express module by Dave/DENX.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: John Rigby <jcrigby@gmail.com>
---
arch/powerpc/platforms/512x/Kconfig | 9 +++
arch/powerpc/platforms/512x/Makefile | 1 +
arch/powerpc/platforms/512x/aria.c | 73 +++++++++++++++++++++++++
arch/powerpc/platforms/512x/mpc5121_generic.c | 1 +
4 files changed, 84 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/platforms/512x/aria.c
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 4dac9b0..faef03e 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -10,6 +10,15 @@ config PPC_MPC5121
bool
select PPC_MPC512x
+config ARIA
+ bool "Dave/DENX ARIA COM Express module"
+ depends on 6xx
+ select DEFAULT_UIMAGE
+ select PPC_MPC5121
+ help
+ This option enables support for the ARIA board,
+ a MPC5121E based COM Express module by Dave/DENX.
+
config MPC5121_ADS
bool "Freescale MPC5121E ADS"
depends on 6xx
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -2,5 +2,6 @@
# Makefile for the Freescale PowerPC 512x linux kernel.
#
obj-y += clock.o mpc512x_shared.o
+obj-$(CONFIG_ARIA) += aria.o
obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o
obj-$(CONFIG_MPC5121_GENERIC) += mpc5121_generic.o
diff --git a/arch/powerpc/platforms/512x/aria.c b/arch/powerpc/platforms/512x/aria.c
new file mode 100644
--- /dev/null
+++ b/arch/powerpc/platforms/512x/aria.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2009 Wolfgang Denk <wd@denx.de>
+ *
+ * based on mpc5121_ads.c:
+ *
+ * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. All rights reserved.
+ * Author: John Rigby, <jrigby@freescale.com>, Thur Mar 29 2007
+ *
+ * Description:
+ * ARIA board setup
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+#include <sysdev/fsl_pci.h>
+
+#include "mpc512x.h"
+
+static void __init aria_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+ printk(KERN_INFO "ARIA board from Dave/DENX\n");
+
+#ifdef CONFIG_PCI
+ for_each_compatible_node(np, "pci", "fsl,mpc5121-pci")
+ mpc83xx_add_bridge(np);
+#endif
+
+ mpc512x_init_i2c();
+}
+
+static void __init aria_init_IRQ(void)
+{
+ mpc512x_init_IRQ();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init aria_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "davedenx,aria");
+}
+
+define_machine(aria) {
+ .name = "ARIA",
+ .probe = aria_probe,
+ .setup_arch = aria_setup_arch,
+ .init = mpc512x_declare_of_platform_devices,
+ .init_IRQ = aria_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c
index 2479de9..228d9a2 100644
--- a/arch/powerpc/platforms/512x/mpc5121_generic.c
+++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
@@ -27,6 +27,7 @@
* list of supported boards
*/
static char *board[] __initdata = {
+ "davedenx,aria",
"prt,prtlvt",
NULL
};
--
1.6.0.6
^ permalink raw reply related
* [PATCH 05/04] *** NOT FOR RELEASE *** HACK *** Work around MII clock issue ***
From: Wolfgang Denk @ 2009-05-06 20:21 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Wolfgang Denk
In-Reply-To: <1241641262-5202-1-git-send-email-wd@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: John Rigby <jcrigby@gmail.com>
---
This patch is NOT intended for inclusion into mainline, but rather a
request for help. For some reason which I don't understand yet, the
Ethernet interface on the ARIA board does not work in the default
configuration, because MII probing fails.
What I'm seeing is this; the problem is with this part of code in
"drivers/net/fs_enet/mii-fec.c":
156 fec->mii_speed = ((ppc_proc_freq + 4999999) / 5000000) << 1;
...
163 out_be32(&fec->fecp->fec_mii_speed, fec->mii_speed);
I added some debug messages, and this is what I see:
On the ADS5121, we have the CPU clocked at 400 MHz. I get:
...
## ppc_proc_freq = 399999996, fec->mii_speed = 160
FEC MII Bus: probed
...
It works fine.
According to the Ref. Man.:
A value of 0 in this field turns off the MDC and leaves it in
a low-voltage state. Any non-zero value results in the MDC
frequency of 1/(mii_speed*2) of the system clock frequency.
that means we have a MDC frequency of
400 MHz / (2 * 160) = 1.25 MHz
which is obviously within the 2.5 MHz limit.
Now ARIA is currently running at 316.8 MHz, and this is what I get:
...
## ppc_proc_freq = 316800000, fec->mii_speed = 128
fsl-fec-mdio: probe of 80002800.mdio failed with error -5
...
It fails. MDC frequency is
316.8 MHz / (2 * 128) = 1.24 MHz
which should be fine.
However, If I change the code to
fec->mii_speed = (((ppc_proc_freq / 1000000) / 30) + 1) << 1;
then I get:
...
## ppc_proc_freq = 316800000, fec->mii_speed = 22
FEC MII Bus: probed
... and it's working!!! However, I compute MDC frequency as
316.8 MHz / (2 * 22) = 7.2 MHz
which is far above the maximum allowed clock of 2.5 MHz ???
Has anybody any idea what might be going on here?
drivers/net/fs_enet/mii-fec.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index 9d8bd97..a51dd83 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -153,8 +153,12 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
if (!fec->fecp)
goto out_fec;
+#if 0
fec->mii_speed = ((ppc_proc_freq + 4999999) / 5000000) << 1;
-
+#else
+ fec->mii_speed = (((ppc_proc_freq / 1000000) / 30) + 1) << 1;
+ printk("## ppc_proc_freq = %d, fec->mii_speed = %d\n", ppc_proc_freq, fec->mii_speed);
+#endif
setbits32(&fec->fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
setbits32(&fec->fecp->fec_ecntrl, FEC_ECNTRL_PINMUX |
FEC_ECNTRL_ETHER_EN);
--
1.6.0.6
^ permalink raw reply related
* [PATCH 00/04] Add support for ARIA board
From: Wolfgang Denk @ 2009-05-06 20:20 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Wolfgang Denk
The following patch series adds support for the ARIA board.
ARIA is a MPC5121e based COM Express board by Dave/DENX.
[PATCH 01/04] mpc5121: prepare support for additional boards
[PATCH 02/04] ARIA: add device tree source file
[PATCH 03/04] mpc5121: add support for ARIA board
[PATCH 04/04] ARIA: add default config file
[PATCH 05/04] *** NOT FOR RELEASE *** HACK *** Work around MII clock issue ***
[This is actually not a patch for inclusion but a call
for help.]
The patches are based on v2.6.30-rc4 and cover the following
items:
- platform, DTS
- DMA
- FEC Ethernet
- UART (without h/w flow control)
- NAND
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: John Rigby <jcrigby@gmail.com>
---
Summary statistics:
arch/powerpc/boot/dts/aria.dts | 407 ++++++
arch/powerpc/configs/512x/aria_defconfig | 1789 ++++++++++++++++++++++++
arch/powerpc/configs/512x/mpc5121ads_defconfig | 1190 ++++++++++++++++
arch/powerpc/platforms/512x/Kconfig | 9 +
arch/powerpc/platforms/512x/Makefile | 1 +
arch/powerpc/platforms/512x/aria.c | 70 +
arch/powerpc/platforms/512x/mpc5121_generic.c | 1 +
drivers/net/fs_enet/mii-fec.c | 6 +- [by patch 05]
8 files changed, 3472 insertions(+), 1 deletions(-)
^ permalink raw reply
* [PATCH 01/04] mpc5121: prepare support for additional boards
From: Wolfgang Denk @ 2009-05-06 20:20 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Wolfgang Denk
In-Reply-To: <1241641262-5202-1-git-send-email-wd@denx.de>
As more MPC512x based boards will be coming soon, a new directory
arch/powerpc/configs/512x/ for board specific config files is created,
following the example of other processor families.
In a first step, we just copy (and update) the existing defconfig
file for the mpc5121ads board. When new boards get added, the old
arch/powerpc/configs/mpc5121_defconfig file will get adjusted to
allow for a generic kernel image for MPC512x based boards.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: John Rigby <jcrigby@gmail.com>
---
arch/powerpc/configs/512x/mpc5121ads_defconfig | 1190 ++++++++++++++++++++++++
1 files changed, 1190 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/configs/512x/mpc5121ads_defconfig
diff --git a/arch/powerpc/configs/512x/mpc5121ads_defconfig b/arch/powerpc/configs/512x/mpc5121ads_defconfig
new file mode 100644
index 0000000..ac6c18f
--- /dev/null
+++ b/arch/powerpc/configs/512x/mpc5121ads_defconfig
@@ -0,0 +1,1190 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc4
+# Wed May 6 20:48:17 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+CONFIG_PPC_MSI_BITMAP=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_MPC512x=y
+CONFIG_PPC_MPC5121=y
+# CONFIG_ARIA is not set
+CONFIG_MPC5121_ADS=y
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_QUICC_ENGINE is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+CONFIG_HAVE_MLOCK=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND_MPC5121_NFC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_XIP=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_MPC5121_FEC=y
+CONFIG_FS_ENET_FEC_TX_ALIGN_WORKAROUND=y
+CONFIG_FS_ENET_HAS_FEC=y
+CONFIG_FS_ENET_MDIO_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_RTC_DRV_MPC5121=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_FSL_DMA is not set
+CONFIG_MPC512X_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+CONFIG_DMATEST=m
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XIP=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_XIP=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_PPC_CLOCK=y
+# CONFIG_VIRTUALIZATION is not set
--
1.6.0.6
^ permalink raw reply related
* [PATCH 04/04] ARIA: add default config file
From: Wolfgang Denk @ 2009-05-06 20:21 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Wolfgang Denk
In-Reply-To: <1241641262-5202-1-git-send-email-wd@denx.de>
Default config file for the ARIA board,
a MPC5121 based COM Express module by Dave/DENX.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: John Rigby <jcrigby@gmail.com>
---
arch/powerpc/configs/512x/aria_defconfig | 1789 ++++++++++++++++++++++++++++++
1 files changed, 1789 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/configs/512x/aria_defconfig
diff --git a/arch/powerpc/configs/512x/aria_defconfig b/arch/powerpc/configs/512x/aria_defconfig
new file mode 100644
index 0000000..ee01bcd
--- /dev/null
+++ b/arch/powerpc/configs/512x/aria_defconfig
@@ -0,0 +1,1789 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc3
+# Thu Apr 30 00:27:08 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CHRP is not set
+CONFIG_PPC_MPC512x=y
+CONFIG_PPC_MPC5121=y
+CONFIG_ARIA=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_QUICC_ENGINE is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+CONFIG_ADVANCED_OPTIONS=y
+# CONFIG_LOWMEM_SIZE_BOOL is not set
+CONFIG_LOWMEM_SIZE=0x30000000
+# CONFIG_PAGE_OFFSET_BOOL is not set
+CONFIG_PAGE_OFFSET=0xc0000000
+# CONFIG_KERNEL_START_BOOL is not set
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+# CONFIG_TASK_SIZE_BOOL is not set
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND_MPC5121_NFC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_FSL is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_MPC5121_FEC=y
+CONFIG_FS_ENET_FEC_TX_ALIGN_WORKAROUND=y
+CONFIG_FS_ENET_HAS_FEC=y
+CONFIG_FS_ENET_MDIO_FEC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_FSL_DIU is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_RTC_DRV_MPC5121=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_FSL_DMA is not set
+CONFIG_MPC512X_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+CONFIG_ASYNC_TX_DMA=y
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+CONFIG_PPC_EARLY_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+# CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_PPC_CLOCK=y
+# CONFIG_VIRTUALIZATION is not set
--
1.6.0.6
^ permalink raw reply related
* [PATCH 09/12] mpc5121ads: Added I2C RTC node to mpc5121ads DTS.
From: Wolfgang Denk @ 2009-05-06 20:15 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Piotr Ziecik, Wolfgang Denk
In-Reply-To: <1241640919-4650-1-git-send-email-wd@denx.de>
From: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: John Rigby <jcrigby@gmail.com>
---
arch/powerpc/boot/dts/mpc5121ads.dts | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index 93fe12a..c2d9de9 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -210,6 +210,11 @@
interrupts = <9 0x8>;
interrupt-parent = < &ipic >;
fsl5200-clocking;
+
+ rtc@68 {
+ compatible = "stm,m41t80";
+ reg = <0x68>;
+ };
};
i2c@1720 {
--
1.6.0.6
^ permalink raw reply related
* [PATCH] powerpc: Fix oprofile sampling of marked events on POWER7
From: Mike Wolf @ 2009-05-06 20:25 UTC (permalink / raw)
To: linuxppc-dev
>From Maynard Johnson <maynardj@us.ibm.com>
Description
-----------
Change ppc64 oprofile kernel driver to use the SLOT bits (MMCRA[37:39]only on
older processors where those bits are defined.
Background
----------
The performance monitor unit of the 64-bit POWER processor family has the
ability to collect accurate instruction-level samples when profiling on marked
events (i.e., "PM_MRK_<event-name>"). In processors prior to POWER6, the MMCRA
register contained "slot information" that the oprofile kernel driver used to
adjust the value latched in the SIAR at the time of a PMU interrupt. But as of
POWER6, these slot bits in MMCRA are no longer necessary for oprofile to use,
since the SIAR itself holds the accurate sampled instruction address. With
POWER6, these MMCRA slot bits were zero'ed out by hardware so oprofile's use of
these slot bits was, in effect, a NOP. But with POWER7, these bits are no
longer zero'ed out; however, they serve some other purpose rather than slot
information. Thus, using these bits on POWER7 to adjust the SIAR value results
in samples being attributed to the wrong instructions. The attached patch
changes the oprofile kernel driver to ignore these slot bits on all newer
processors starting with POWER6.
Signed-off-by: Michael Wolf <mjw@linux.vnet.ibm.com>
---
diff -paur linux/arch/powerpc/oprofile/op_model_power4.c linux-p7-oprofile-patch//arch/powerpc/oprofile/op_model_power4.c
--- linux/arch/powerpc/oprofile/op_model_power4.c 2009-05-01 08:20:21.000000000 -0500
+++ linux-p7-oprofile-patch//arch/powerpc/oprofile/op_model_power4.c 2009-05-01 08:20:05.000000000 -0500
@@ -26,6 +26,7 @@
static unsigned long reset_value[OP_MAX_COUNTER];
static int oprofile_running;
+static int use_slot_nums;
/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
static u32 mmcr0_val;
@@ -61,6 +62,12 @@ static int power4_reg_setup(struct op_co
else
mmcr0_val |= MMCR0_PROBLEM_DISABLE;
+ if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
+ __is_processor(PV_970) || __is_processor(PV_970FX) ||
+ __is_processor(PV_970MP) || __is_processor(PV_970GX) ||
+ __is_processor(PV_POWER5) || __is_processor(PV_POWER5p))
+ use_slot_nums = 1;
+
return 0;
}
@@ -206,7 +213,7 @@ static unsigned long get_pc(struct pt_re
mmcra = mfspr(SPRN_MMCRA);
- if (mmcra & MMCRA_SAMPLE_ENABLE) {
+ if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) {
slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT);
if (slot > 1)
pc += 4 * (slot - 1);
^ permalink raw reply
* Re: [PATCH 04/12] mpc5121: Added reset module registers representation.
From: Scott Wood @ 2009-05-06 20:29 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, Piotr Ziecik
In-Reply-To: <1241640919-4650-5-git-send-email-wd@denx.de>
Wolfgang Denk wrote:
> From: Piotr Ziecik <kosmo@semihalf.com>
>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
> ---
> arch/powerpc/include/asm/mpc512x.h | 13 +++++++++++++
> 1 files changed, 13 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/mpc512x.h b/arch/powerpc/include/asm/mpc512x.h
> index c48a165..ea50d8d 100644
> --- a/arch/powerpc/include/asm/mpc512x.h
> +++ b/arch/powerpc/include/asm/mpc512x.h
> @@ -16,6 +16,19 @@
> #ifndef __ASM_POWERPC_MPC512x_H__
> #define __ASM_POWERPC_MPC512x_H__
>
> +/* MPC512x Reset module registers */
> +struct mpc512x_reset_module {
> + u32 rcwlr; /* Reset Configuration Word Low Register */
> + u32 rcwhr; /* Reset Configuration Word High Register */
> + u32 reserved1;
> + u32 reserved2;
> + u32 rsr; /* Reset Status Register */
> + u32 rmr; /* Reset Mode Register */
> + u32 rpr; /* Reset Protection Register */
> + u32 rcr; /* Reset Control Register */
> + u32 rcer; /* Reset Control Enable Register */
> +} __attribute__ ((__packed__));
> +
83xx has the same registers; we should define it in a non-512x-specific
header.
-Scott
^ permalink raw reply
* Re: [PATCH 01/04] mpc5121: prepare support for additional boards
From: Grant Likely @ 2009-05-06 20:29 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev
In-Reply-To: <1241641262-5202-2-git-send-email-wd@denx.de>
On Wed, May 6, 2009 at 2:20 PM, Wolfgang Denk <wd@denx.de> wrote:
> As more MPC512x based boards will be coming soon, a new directory
> arch/powerpc/configs/512x/ for board specific config files is created,
> following the example of other processor families.
>
> In a first step, we just copy (and update) the existing defconfig
> file for the mpc5121ads board. When new boards get added, the old
> arch/powerpc/configs/mpc5121_defconfig file will get adjusted to
> allow for a generic kernel image for MPC512x based boards.
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
I'll ignore this one for the time being. After stuff is actually
merged and at about -rc2 time is the time to muck around with
defconfigs.
g.
> ---
> =A0arch/powerpc/configs/512x/mpc5121ads_defconfig | 1190 ++++++++++++++++=
++++++++
> =A01 files changed, 1190 insertions(+), 0 deletions(-)
> =A0create mode 100644 arch/powerpc/configs/512x/mpc5121ads_defconfig
>
> diff --git a/arch/powerpc/configs/512x/mpc5121ads_defconfig b/arch/powerp=
c/configs/512x/mpc5121ads_defconfig
> new file mode 100644
> index 0000000..ac6c18f
> --- /dev/null
> +++ b/arch/powerpc/configs/512x/mpc5121ads_defconfig
> @@ -0,0 +1,1190 @@
> +#
> +# Automatically generated make config: don't edit
> +# Linux kernel version: 2.6.30-rc4
> +# Wed May =A06 20:48:17 2009
> +#
> +# CONFIG_PPC64 is not set
> +
> +#
> +# Processor support
> +#
> +CONFIG_6xx=3Dy
> +# CONFIG_PPC_85xx is not set
> +# CONFIG_PPC_8xx is not set
> +# CONFIG_40x is not set
> +# CONFIG_44x is not set
> +# CONFIG_E200 is not set
> +CONFIG_PPC_BOOK3S=3Dy
> +CONFIG_PPC_FPU=3Dy
> +# CONFIG_ALTIVEC is not set
> +CONFIG_PPC_STD_MMU=3Dy
> +CONFIG_PPC_STD_MMU_32=3Dy
> +# CONFIG_PPC_MM_SLICES is not set
> +# CONFIG_SMP is not set
> +CONFIG_NOT_COHERENT_CACHE=3Dy
> +CONFIG_PPC32=3Dy
> +CONFIG_WORD_SIZE=3D32
> +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
> +CONFIG_MMU=3Dy
> +CONFIG_GENERIC_CMOS_UPDATE=3Dy
> +CONFIG_GENERIC_TIME=3Dy
> +CONFIG_GENERIC_TIME_VSYSCALL=3Dy
> +CONFIG_GENERIC_CLOCKEVENTS=3Dy
> +CONFIG_GENERIC_HARDIRQS=3Dy
> +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
> +CONFIG_IRQ_PER_CPU=3Dy
> +CONFIG_STACKTRACE_SUPPORT=3Dy
> +CONFIG_HAVE_LATENCYTOP_SUPPORT=3Dy
> +CONFIG_LOCKDEP_SUPPORT=3Dy
> +CONFIG_RWSEM_XCHGADD_ALGORITHM=3Dy
> +CONFIG_ARCH_HAS_ILOG2_U32=3Dy
> +CONFIG_GENERIC_HWEIGHT=3Dy
> +CONFIG_GENERIC_CALIBRATE_DELAY=3Dy
> +CONFIG_GENERIC_FIND_NEXT_BIT=3Dy
> +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
> +CONFIG_PPC=3Dy
> +CONFIG_EARLY_PRINTK=3Dy
> +CONFIG_GENERIC_NVRAM=3Dy
> +CONFIG_SCHED_OMIT_FRAME_POINTER=3Dy
> +CONFIG_ARCH_MAY_HAVE_PC_FDC=3Dy
> +CONFIG_PPC_OF=3Dy
> +CONFIG_OF=3Dy
> +# CONFIG_PPC_UDBG_16550 is not set
> +# CONFIG_GENERIC_TBSYNC is not set
> +CONFIG_AUDIT_ARCH=3Dy
> +CONFIG_GENERIC_BUG=3Dy
> +CONFIG_DEFAULT_UIMAGE=3Dy
> +# CONFIG_PPC_DCR_NATIVE is not set
> +# CONFIG_PPC_DCR_MMIO is not set
> +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=3Dy
> +CONFIG_DEFCONFIG_LIST=3D"/lib/modules/$UNAME_RELEASE/.config"
> +
> +#
> +# General setup
> +#
> +CONFIG_EXPERIMENTAL=3Dy
> +CONFIG_BROKEN_ON_SMP=3Dy
> +CONFIG_INIT_ENV_ARG_LIMIT=3D32
> +CONFIG_LOCALVERSION=3D""
> +CONFIG_LOCALVERSION_AUTO=3Dy
> +# CONFIG_SWAP is not set
> +CONFIG_SYSVIPC=3Dy
> +CONFIG_SYSVIPC_SYSCTL=3Dy
> +# CONFIG_POSIX_MQUEUE is not set
> +# CONFIG_BSD_PROCESS_ACCT is not set
> +# CONFIG_TASKSTATS is not set
> +# CONFIG_AUDIT is not set
> +
> +#
> +# RCU Subsystem
> +#
> +CONFIG_CLASSIC_RCU=3Dy
> +# CONFIG_TREE_RCU is not set
> +# CONFIG_PREEMPT_RCU is not set
> +# CONFIG_TREE_RCU_TRACE is not set
> +# CONFIG_PREEMPT_RCU_TRACE is not set
> +# CONFIG_IKCONFIG is not set
> +CONFIG_LOG_BUF_SHIFT=3D16
> +# CONFIG_GROUP_SCHED is not set
> +# CONFIG_CGROUPS is not set
> +CONFIG_SYSFS_DEPRECATED=3Dy
> +CONFIG_SYSFS_DEPRECATED_V2=3Dy
> +# CONFIG_RELAY is not set
> +CONFIG_NAMESPACES=3Dy
> +# CONFIG_UTS_NS is not set
> +# CONFIG_IPC_NS is not set
> +# CONFIG_USER_NS is not set
> +# CONFIG_PID_NS is not set
> +# CONFIG_NET_NS is not set
> +CONFIG_BLK_DEV_INITRD=3Dy
> +CONFIG_INITRAMFS_SOURCE=3D""
> +CONFIG_RD_GZIP=3Dy
> +CONFIG_RD_BZIP2=3Dy
> +CONFIG_RD_LZMA=3Dy
> +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> +CONFIG_SYSCTL=3Dy
> +CONFIG_ANON_INODES=3Dy
> +# CONFIG_EMBEDDED is not set
> +CONFIG_SYSCTL_SYSCALL=3Dy
> +CONFIG_KALLSYMS=3Dy
> +# CONFIG_KALLSYMS_EXTRA_PASS is not set
> +# CONFIG_STRIP_ASM_SYMS is not set
> +CONFIG_HOTPLUG=3Dy
> +CONFIG_PRINTK=3Dy
> +CONFIG_BUG=3Dy
> +CONFIG_ELF_CORE=3Dy
> +CONFIG_BASE_FULL=3Dy
> +CONFIG_FUTEX=3Dy
> +CONFIG_EPOLL=3Dy
> +CONFIG_SIGNALFD=3Dy
> +CONFIG_TIMERFD=3Dy
> +CONFIG_EVENTFD=3Dy
> +CONFIG_SHMEM=3Dy
> +CONFIG_AIO=3Dy
> +CONFIG_VM_EVENT_COUNTERS=3Dy
> +CONFIG_PCI_QUIRKS=3Dy
> +# CONFIG_COMPAT_BRK is not set
> +CONFIG_SLAB=3Dy
> +# CONFIG_SLUB is not set
> +# CONFIG_SLOB is not set
> +# CONFIG_PROFILING is not set
> +# CONFIG_MARKERS is not set
> +CONFIG_HAVE_OPROFILE=3Dy
> +# CONFIG_KPROBES is not set
> +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=3Dy
> +CONFIG_HAVE_IOREMAP_PROT=3Dy
> +CONFIG_HAVE_KPROBES=3Dy
> +CONFIG_HAVE_KRETPROBES=3Dy
> +CONFIG_HAVE_ARCH_TRACEHOOK=3Dy
> +CONFIG_HAVE_CLK=3Dy
> +# CONFIG_SLOW_WORK is not set
> +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
> +CONFIG_SLABINFO=3Dy
> +CONFIG_RT_MUTEXES=3Dy
> +CONFIG_BASE_SMALL=3D0
> +CONFIG_MODULES=3Dy
> +# CONFIG_MODULE_FORCE_LOAD is not set
> +CONFIG_MODULE_UNLOAD=3Dy
> +# CONFIG_MODULE_FORCE_UNLOAD is not set
> +# CONFIG_MODVERSIONS is not set
> +# CONFIG_MODULE_SRCVERSION_ALL is not set
> +CONFIG_BLOCK=3Dy
> +# CONFIG_LBD is not set
> +# CONFIG_BLK_DEV_BSG is not set
> +# CONFIG_BLK_DEV_INTEGRITY is not set
> +
> +#
> +# IO Schedulers
> +#
> +CONFIG_IOSCHED_NOOP=3Dy
> +# CONFIG_IOSCHED_AS is not set
> +CONFIG_IOSCHED_DEADLINE=3Dy
> +# CONFIG_IOSCHED_CFQ is not set
> +# CONFIG_DEFAULT_AS is not set
> +CONFIG_DEFAULT_DEADLINE=3Dy
> +# CONFIG_DEFAULT_CFQ is not set
> +# CONFIG_DEFAULT_NOOP is not set
> +CONFIG_DEFAULT_IOSCHED=3D"deadline"
> +# CONFIG_FREEZER is not set
> +CONFIG_PPC_MSI_BITMAP=3Dy
> +
> +#
> +# Platform support
> +#
> +# CONFIG_PPC_CHRP is not set
> +CONFIG_PPC_MPC512x=3Dy
> +CONFIG_PPC_MPC5121=3Dy
> +# CONFIG_ARIA is not set
> +CONFIG_MPC5121_ADS=3Dy
> +# CONFIG_MPC5121_GENERIC is not set
> +# CONFIG_PPC_MPC52xx is not set
> +# CONFIG_PPC_PMAC is not set
> +# CONFIG_PPC_CELL is not set
> +# CONFIG_PPC_CELL_NATIVE is not set
> +# CONFIG_PPC_82xx is not set
> +# CONFIG_PQ2ADS is not set
> +# CONFIG_PPC_83xx is not set
> +# CONFIG_PPC_86xx is not set
> +# CONFIG_EMBEDDED6xx is not set
> +# CONFIG_AMIGAONE is not set
> +CONFIG_PPC_OF_BOOT_TRAMPOLINE=3Dy
> +CONFIG_IPIC=3Dy
> +# CONFIG_MPIC is not set
> +# CONFIG_MPIC_WEIRD is not set
> +# CONFIG_PPC_I8259 is not set
> +# CONFIG_PPC_RTAS is not set
> +# CONFIG_MMIO_NVRAM is not set
> +# CONFIG_PPC_MPC106 is not set
> +# CONFIG_PPC_970_NAP is not set
> +# CONFIG_PPC_INDIRECT_IO is not set
> +# CONFIG_GENERIC_IOMAP is not set
> +# CONFIG_CPU_FREQ is not set
> +# CONFIG_TAU is not set
> +# CONFIG_QUICC_ENGINE is not set
> +# CONFIG_FSL_ULI1575 is not set
> +# CONFIG_SIMPLE_GPIO is not set
> +
> +#
> +# Kernel options
> +#
> +# CONFIG_HIGHMEM is not set
> +CONFIG_TICK_ONESHOT=3Dy
> +CONFIG_NO_HZ=3Dy
> +# CONFIG_HIGH_RES_TIMERS is not set
> +CONFIG_GENERIC_CLOCKEVENTS_BUILD=3Dy
> +# CONFIG_HZ_100 is not set
> +# CONFIG_HZ_250 is not set
> +# CONFIG_HZ_300 is not set
> +CONFIG_HZ_1000=3Dy
> +CONFIG_HZ=3D1000
> +# CONFIG_SCHED_HRTICK is not set
> +CONFIG_PREEMPT_NONE=3Dy
> +# CONFIG_PREEMPT_VOLUNTARY is not set
> +# CONFIG_PREEMPT is not set
> +CONFIG_BINFMT_ELF=3Dy
> +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> +# CONFIG_HAVE_AOUT is not set
> +# CONFIG_BINFMT_MISC is not set
> +# CONFIG_IOMMU_HELPER is not set
> +CONFIG_PPC_NEED_DMA_SYNC_OPS=3Dy
> +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=3Dy
> +CONFIG_ARCH_HAS_WALK_MEMORY=3Dy
> +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=3Dy
> +# CONFIG_KEXEC is not set
> +# CONFIG_CRASH_DUMP is not set
> +CONFIG_ARCH_FLATMEM_ENABLE=3Dy
> +CONFIG_ARCH_POPULATES_NODE_MAP=3Dy
> +CONFIG_SELECT_MEMORY_MODEL=3Dy
> +CONFIG_FLATMEM_MANUAL=3Dy
> +# CONFIG_DISCONTIGMEM_MANUAL is not set
> +# CONFIG_SPARSEMEM_MANUAL is not set
> +CONFIG_FLATMEM=3Dy
> +CONFIG_FLAT_NODE_MEM_MAP=3Dy
> +CONFIG_PAGEFLAGS_EXTENDED=3Dy
> +CONFIG_SPLIT_PTLOCK_CPUS=3D4
> +# CONFIG_MIGRATION is not set
> +# CONFIG_PHYS_ADDR_T_64BIT is not set
> +CONFIG_ZONE_DMA_FLAG=3D1
> +CONFIG_BOUNCE=3Dy
> +CONFIG_VIRT_TO_BUS=3Dy
> +# CONFIG_UNEVICTABLE_LRU is not set
> +CONFIG_HAVE_MLOCK=3Dy
> +CONFIG_PPC_4K_PAGES=3Dy
> +# CONFIG_PPC_16K_PAGES is not set
> +# CONFIG_PPC_64K_PAGES is not set
> +# CONFIG_PPC_256K_PAGES is not set
> +CONFIG_FORCE_MAX_ZONEORDER=3D11
> +CONFIG_PROC_DEVICETREE=3Dy
> +# CONFIG_CMDLINE_BOOL is not set
> +CONFIG_EXTRA_TARGETS=3D""
> +# CONFIG_PM is not set
> +# CONFIG_SECCOMP is not set
> +CONFIG_ISA_DMA_API=3Dy
> +
> +#
> +# Bus options
> +#
> +CONFIG_ZONE_DMA=3Dy
> +CONFIG_GENERIC_ISA_DMA=3Dy
> +CONFIG_PPC_INDIRECT_PCI=3Dy
> +CONFIG_FSL_SOC=3Dy
> +CONFIG_FSL_PCI=3Dy
> +CONFIG_PPC_PCI_CHOICE=3Dy
> +CONFIG_PCI=3Dy
> +CONFIG_PCI_DOMAINS=3Dy
> +CONFIG_PCI_SYSCALL=3Dy
> +CONFIG_PCIEPORTBUS=3Dy
> +CONFIG_PCIEAER=3Dy
> +# CONFIG_PCIEASPM is not set
> +CONFIG_ARCH_SUPPORTS_MSI=3Dy
> +CONFIG_PCI_MSI=3Dy
> +# CONFIG_PCI_LEGACY is not set
> +# CONFIG_PCI_STUB is not set
> +# CONFIG_PCI_IOV is not set
> +# CONFIG_PCCARD is not set
> +# CONFIG_HOTPLUG_PCI is not set
> +# CONFIG_HAS_RAPIDIO is not set
> +
> +#
> +# Advanced setup
> +#
> +# CONFIG_ADVANCED_OPTIONS is not set
> +
> +#
> +# Default settings for advanced configuration options are used
> +#
> +CONFIG_LOWMEM_SIZE=3D0x30000000
> +CONFIG_PAGE_OFFSET=3D0xc0000000
> +CONFIG_KERNEL_START=3D0xc0000000
> +CONFIG_PHYSICAL_START=3D0x00000000
> +CONFIG_TASK_SIZE=3D0xc0000000
> +CONFIG_NET=3Dy
> +
> +#
> +# Networking options
> +#
> +CONFIG_PACKET=3Dy
> +# CONFIG_PACKET_MMAP is not set
> +CONFIG_UNIX=3Dy
> +# CONFIG_NET_KEY is not set
> +CONFIG_INET=3Dy
> +# CONFIG_IP_MULTICAST is not set
> +# CONFIG_IP_ADVANCED_ROUTER is not set
> +CONFIG_IP_FIB_HASH=3Dy
> +CONFIG_IP_PNP=3Dy
> +# CONFIG_IP_PNP_DHCP is not set
> +# CONFIG_IP_PNP_BOOTP is not set
> +# CONFIG_IP_PNP_RARP is not set
> +# CONFIG_NET_IPIP is not set
> +# CONFIG_NET_IPGRE is not set
> +# CONFIG_ARPD is not set
> +# CONFIG_SYN_COOKIES is not set
> +# CONFIG_INET_AH is not set
> +# CONFIG_INET_ESP is not set
> +# CONFIG_INET_IPCOMP is not set
> +# CONFIG_INET_XFRM_TUNNEL is not set
> +# CONFIG_INET_TUNNEL is not set
> +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> +# CONFIG_INET_XFRM_MODE_TUNNEL is not set
> +# CONFIG_INET_XFRM_MODE_BEET is not set
> +# CONFIG_INET_LRO is not set
> +# CONFIG_INET_DIAG is not set
> +# CONFIG_TCP_CONG_ADVANCED is not set
> +CONFIG_TCP_CONG_CUBIC=3Dy
> +CONFIG_DEFAULT_TCP_CONG=3D"cubic"
> +# CONFIG_TCP_MD5SIG is not set
> +# CONFIG_IPV6 is not set
> +# CONFIG_NETWORK_SECMARK is not set
> +# CONFIG_NETFILTER is not set
> +# CONFIG_IP_DCCP is not set
> +# CONFIG_IP_SCTP is not set
> +# CONFIG_TIPC is not set
> +# CONFIG_ATM is not set
> +# CONFIG_BRIDGE is not set
> +# CONFIG_NET_DSA is not set
> +# CONFIG_VLAN_8021Q is not set
> +# CONFIG_DECNET is not set
> +# CONFIG_LLC2 is not set
> +# CONFIG_IPX is not set
> +# CONFIG_ATALK is not set
> +# CONFIG_X25 is not set
> +# CONFIG_LAPB is not set
> +# CONFIG_ECONET is not set
> +# CONFIG_WAN_ROUTER is not set
> +# CONFIG_PHONET is not set
> +# CONFIG_NET_SCHED is not set
> +# CONFIG_DCB is not set
> +
> +#
> +# Network testing
> +#
> +# CONFIG_NET_PKTGEN is not set
> +# CONFIG_HAMRADIO is not set
> +# CONFIG_CAN is not set
> +# CONFIG_IRDA is not set
> +# CONFIG_BT is not set
> +# CONFIG_AF_RXRPC is not set
> +# CONFIG_WIRELESS is not set
> +# CONFIG_WIMAX is not set
> +# CONFIG_RFKILL is not set
> +# CONFIG_NET_9P is not set
> +
> +#
> +# Device Drivers
> +#
> +
> +#
> +# Generic Driver Options
> +#
> +CONFIG_UEVENT_HELPER_PATH=3D"/sbin/hotplug"
> +CONFIG_STANDALONE=3Dy
> +# CONFIG_PREVENT_FIRMWARE_BUILD is not set
> +CONFIG_FW_LOADER=3Dy
> +# CONFIG_FIRMWARE_IN_KERNEL is not set
> +CONFIG_EXTRA_FIRMWARE=3D""
> +# CONFIG_SYS_HYPERVISOR is not set
> +# CONFIG_CONNECTOR is not set
> +CONFIG_MTD=3Dy
> +# CONFIG_MTD_DEBUG is not set
> +# CONFIG_MTD_CONCAT is not set
> +CONFIG_MTD_PARTITIONS=3Dy
> +# CONFIG_MTD_TESTS is not set
> +# CONFIG_MTD_REDBOOT_PARTS is not set
> +# CONFIG_MTD_CMDLINE_PARTS is not set
> +# CONFIG_MTD_OF_PARTS is not set
> +# CONFIG_MTD_AR7_PARTS is not set
> +
> +#
> +# User Modules And Translation Layers
> +#
> +CONFIG_MTD_CHAR=3Dy
> +CONFIG_MTD_BLKDEVS=3Dy
> +CONFIG_MTD_BLOCK=3Dy
> +# CONFIG_FTL is not set
> +# CONFIG_NFTL is not set
> +# CONFIG_INFTL is not set
> +# CONFIG_RFD_FTL is not set
> +# CONFIG_SSFDC is not set
> +# CONFIG_MTD_OOPS is not set
> +
> +#
> +# RAM/ROM/Flash chip drivers
> +#
> +# CONFIG_MTD_CFI is not set
> +# CONFIG_MTD_JEDECPROBE is not set
> +CONFIG_MTD_MAP_BANK_WIDTH_1=3Dy
> +CONFIG_MTD_MAP_BANK_WIDTH_2=3Dy
> +CONFIG_MTD_MAP_BANK_WIDTH_4=3Dy
> +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> +CONFIG_MTD_CFI_I1=3Dy
> +CONFIG_MTD_CFI_I2=3Dy
> +# CONFIG_MTD_CFI_I4 is not set
> +# CONFIG_MTD_CFI_I8 is not set
> +# CONFIG_MTD_RAM is not set
> +# CONFIG_MTD_ROM is not set
> +# CONFIG_MTD_ABSENT is not set
> +
> +#
> +# Mapping drivers for chip access
> +#
> +# CONFIG_MTD_COMPLEX_MAPPINGS is not set
> +# CONFIG_MTD_INTEL_VR_NOR is not set
> +# CONFIG_MTD_PLATRAM is not set
> +
> +#
> +# Self-contained MTD device drivers
> +#
> +# CONFIG_MTD_PMC551 is not set
> +# CONFIG_MTD_SLRAM is not set
> +# CONFIG_MTD_PHRAM is not set
> +# CONFIG_MTD_MTDRAM is not set
> +# CONFIG_MTD_BLOCK2MTD is not set
> +
> +#
> +# Disk-On-Chip Device Drivers
> +#
> +# CONFIG_MTD_DOC2000 is not set
> +# CONFIG_MTD_DOC2001 is not set
> +# CONFIG_MTD_DOC2001PLUS is not set
> +CONFIG_MTD_NAND=3Dy
> +# CONFIG_MTD_NAND_VERIFY_WRITE is not set
> +# CONFIG_MTD_NAND_ECC_SMC is not set
> +# CONFIG_MTD_NAND_MUSEUM_IDS is not set
> +CONFIG_MTD_NAND_IDS=3Dy
> +# CONFIG_MTD_NAND_DISKONCHIP is not set
> +# CONFIG_MTD_NAND_CAFE is not set
> +# CONFIG_MTD_NAND_NANDSIM is not set
> +# CONFIG_MTD_NAND_PLATFORM is not set
> +# CONFIG_MTD_NAND_FSL_ELBC is not set
> +CONFIG_MTD_NAND_MPC5121_NFC=3Dy
> +# CONFIG_MTD_ONENAND is not set
> +
> +#
> +# LPDDR flash memory drivers
> +#
> +# CONFIG_MTD_LPDDR is not set
> +
> +#
> +# UBI - Unsorted block images
> +#
> +CONFIG_MTD_UBI=3Dy
> +CONFIG_MTD_UBI_WL_THRESHOLD=3D4096
> +CONFIG_MTD_UBI_BEB_RESERVE=3D1
> +# CONFIG_MTD_UBI_GLUEBI is not set
> +
> +#
> +# UBI debugging options
> +#
> +# CONFIG_MTD_UBI_DEBUG is not set
> +CONFIG_OF_DEVICE=3Dy
> +CONFIG_OF_I2C=3Dy
> +# CONFIG_PARPORT is not set
> +CONFIG_BLK_DEV=3Dy
> +# CONFIG_BLK_DEV_FD is not set
> +# CONFIG_BLK_CPQ_DA is not set
> +# CONFIG_BLK_CPQ_CISS_DA is not set
> +# CONFIG_BLK_DEV_DAC960 is not set
> +# CONFIG_BLK_DEV_UMEM is not set
> +# CONFIG_BLK_DEV_COW_COMMON is not set
> +# CONFIG_BLK_DEV_LOOP is not set
> +# CONFIG_BLK_DEV_NBD is not set
> +# CONFIG_BLK_DEV_SX8 is not set
> +CONFIG_BLK_DEV_RAM=3Dy
> +CONFIG_BLK_DEV_RAM_COUNT=3D1
> +CONFIG_BLK_DEV_RAM_SIZE=3D8192
> +CONFIG_BLK_DEV_XIP=3Dy
> +# CONFIG_CDROM_PKTCDVD is not set
> +# CONFIG_ATA_OVER_ETH is not set
> +# CONFIG_BLK_DEV_HD is not set
> +CONFIG_MISC_DEVICES=3Dy
> +# CONFIG_PHANTOM is not set
> +# CONFIG_SGI_IOC4 is not set
> +# CONFIG_TIFM_CORE is not set
> +# CONFIG_ICS932S401 is not set
> +# CONFIG_ENCLOSURE_SERVICES is not set
> +# CONFIG_HP_ILO is not set
> +# CONFIG_ISL29003 is not set
> +# CONFIG_C2PORT is not set
> +
> +#
> +# EEPROM support
> +#
> +CONFIG_EEPROM_AT24=3Dy
> +# CONFIG_EEPROM_LEGACY is not set
> +# CONFIG_EEPROM_93CX6 is not set
> +CONFIG_HAVE_IDE=3Dy
> +# CONFIG_IDE is not set
> +
> +#
> +# SCSI device support
> +#
> +# CONFIG_RAID_ATTRS is not set
> +# CONFIG_SCSI is not set
> +# CONFIG_SCSI_DMA is not set
> +# CONFIG_SCSI_NETLINK is not set
> +# CONFIG_ATA is not set
> +# CONFIG_MD is not set
> +# CONFIG_FUSION is not set
> +
> +#
> +# IEEE 1394 (FireWire) support
> +#
> +
> +#
> +# Enable only one of the two stacks, unless you know what you are doing
> +#
> +# CONFIG_FIREWIRE is not set
> +# CONFIG_IEEE1394 is not set
> +# CONFIG_I2O is not set
> +# CONFIG_MACINTOSH_DRIVERS is not set
> +CONFIG_NETDEVICES=3Dy
> +CONFIG_COMPAT_NET_DEV_OPS=3Dy
> +# CONFIG_DUMMY is not set
> +# CONFIG_BONDING is not set
> +# CONFIG_MACVLAN is not set
> +# CONFIG_EQUALIZER is not set
> +# CONFIG_TUN is not set
> +# CONFIG_VETH is not set
> +# CONFIG_ARCNET is not set
> +CONFIG_PHYLIB=3Dy
> +
> +#
> +# MII PHY device drivers
> +#
> +CONFIG_MARVELL_PHY=3Dy
> +CONFIG_DAVICOM_PHY=3Dy
> +CONFIG_QSEMI_PHY=3Dy
> +CONFIG_LXT_PHY=3Dy
> +CONFIG_CICADA_PHY=3Dy
> +CONFIG_VITESSE_PHY=3Dy
> +CONFIG_SMSC_PHY=3Dy
> +CONFIG_BROADCOM_PHY=3Dy
> +CONFIG_ICPLUS_PHY=3Dy
> +CONFIG_REALTEK_PHY=3Dy
> +CONFIG_NATIONAL_PHY=3Dy
> +CONFIG_STE10XP=3Dy
> +CONFIG_LSI_ET1011C_PHY=3Dy
> +CONFIG_FIXED_PHY=3Dy
> +CONFIG_MDIO_BITBANG=3Dy
> +CONFIG_NET_ETHERNET=3Dy
> +CONFIG_MII=3Dy
> +# CONFIG_HAPPYMEAL is not set
> +# CONFIG_SUNGEM is not set
> +# CONFIG_CASSINI is not set
> +# CONFIG_NET_VENDOR_3COM is not set
> +# CONFIG_ETHOC is not set
> +# CONFIG_DNET is not set
> +# CONFIG_NET_TULIP is not set
> +# CONFIG_HP100 is not set
> +# CONFIG_IBM_NEW_EMAC_ZMII is not set
> +# CONFIG_IBM_NEW_EMAC_RGMII is not set
> +# CONFIG_IBM_NEW_EMAC_TAH is not set
> +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
> +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
> +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
> +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
> +# CONFIG_NET_PCI is not set
> +# CONFIG_B44 is not set
> +# CONFIG_ATL2 is not set
> +CONFIG_FS_ENET=3Dy
> +CONFIG_FS_ENET_MPC5121_FEC=3Dy
> +CONFIG_FS_ENET_FEC_TX_ALIGN_WORKAROUND=3Dy
> +CONFIG_FS_ENET_HAS_FEC=3Dy
> +CONFIG_FS_ENET_MDIO_FEC=3Dy
> +# CONFIG_NETDEV_1000 is not set
> +# CONFIG_NETDEV_10000 is not set
> +# CONFIG_TR is not set
> +
> +#
> +# Wireless LAN
> +#
> +# CONFIG_WLAN_PRE80211 is not set
> +# CONFIG_WLAN_80211 is not set
> +
> +#
> +# Enable WiMAX (Networking options) to see the WiMAX drivers
> +#
> +# CONFIG_WAN is not set
> +# CONFIG_FDDI is not set
> +# CONFIG_HIPPI is not set
> +# CONFIG_PPP is not set
> +# CONFIG_SLIP is not set
> +# CONFIG_NETCONSOLE is not set
> +# CONFIG_NETPOLL is not set
> +# CONFIG_NET_POLL_CONTROLLER is not set
> +# CONFIG_ISDN is not set
> +# CONFIG_PHONE is not set
> +
> +#
> +# Input device support
> +#
> +CONFIG_INPUT=3Dy
> +# CONFIG_INPUT_FF_MEMLESS is not set
> +# CONFIG_INPUT_POLLDEV is not set
> +
> +#
> +# Userland interfaces
> +#
> +CONFIG_INPUT_MOUSEDEV=3Dy
> +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> +CONFIG_INPUT_MOUSEDEV_SCREEN_X=3D1024
> +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=3D768
> +# CONFIG_INPUT_JOYDEV is not set
> +# CONFIG_INPUT_EVDEV is not set
> +# CONFIG_INPUT_EVBUG is not set
> +
> +#
> +# Input Device Drivers
> +#
> +# CONFIG_INPUT_KEYBOARD is not set
> +# CONFIG_INPUT_MOUSE is not set
> +# CONFIG_INPUT_JOYSTICK is not set
> +# CONFIG_INPUT_TABLET is not set
> +# CONFIG_INPUT_TOUCHSCREEN is not set
> +# CONFIG_INPUT_MISC is not set
> +
> +#
> +# Hardware I/O ports
> +#
> +# CONFIG_SERIO is not set
> +# CONFIG_GAMEPORT is not set
> +
> +#
> +# Character devices
> +#
> +CONFIG_VT=3Dy
> +CONFIG_CONSOLE_TRANSLATIONS=3Dy
> +CONFIG_VT_CONSOLE=3Dy
> +CONFIG_HW_CONSOLE=3Dy
> +# CONFIG_VT_HW_CONSOLE_BINDING is not set
> +# CONFIG_DEVKMEM is not set
> +# CONFIG_SERIAL_NONSTANDARD is not set
> +# CONFIG_NOZOMI is not set
> +
> +#
> +# Serial drivers
> +#
> +# CONFIG_SERIAL_8250 is not set
> +
> +#
> +# Non-8250 serial port support
> +#
> +# CONFIG_SERIAL_UARTLITE is not set
> +CONFIG_SERIAL_CORE=3Dy
> +CONFIG_SERIAL_CORE_CONSOLE=3Dy
> +CONFIG_SERIAL_MPC52xx=3Dy
> +CONFIG_SERIAL_MPC52xx_CONSOLE=3Dy
> +CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=3D115200
> +# CONFIG_SERIAL_JSM is not set
> +CONFIG_UNIX98_PTYS=3Dy
> +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> +# CONFIG_LEGACY_PTYS is not set
> +# CONFIG_HVC_UDBG is not set
> +# CONFIG_IPMI_HANDLER is not set
> +# CONFIG_HW_RANDOM is not set
> +# CONFIG_NVRAM is not set
> +# CONFIG_R3964 is not set
> +# CONFIG_APPLICOM is not set
> +# CONFIG_RAW_DRIVER is not set
> +# CONFIG_TCG_TPM is not set
> +CONFIG_DEVPORT=3Dy
> +CONFIG_I2C=3Dy
> +CONFIG_I2C_BOARDINFO=3Dy
> +CONFIG_I2C_CHARDEV=3Dy
> +CONFIG_I2C_HELPER_AUTO=3Dy
> +
> +#
> +# I2C Hardware Bus support
> +#
> +
> +#
> +# PC SMBus host controller drivers
> +#
> +# CONFIG_I2C_ALI1535 is not set
> +# CONFIG_I2C_ALI1563 is not set
> +# CONFIG_I2C_ALI15X3 is not set
> +# CONFIG_I2C_AMD756 is not set
> +# CONFIG_I2C_AMD8111 is not set
> +# CONFIG_I2C_I801 is not set
> +# CONFIG_I2C_ISCH is not set
> +# CONFIG_I2C_PIIX4 is not set
> +# CONFIG_I2C_NFORCE2 is not set
> +# CONFIG_I2C_SIS5595 is not set
> +# CONFIG_I2C_SIS630 is not set
> +# CONFIG_I2C_SIS96X is not set
> +# CONFIG_I2C_VIA is not set
> +# CONFIG_I2C_VIAPRO is not set
> +
> +#
> +# I2C system bus drivers (mostly embedded / system-on-chip)
> +#
> +CONFIG_I2C_MPC=3Dy
> +# CONFIG_I2C_OCORES is not set
> +# CONFIG_I2C_SIMTEC is not set
> +
> +#
> +# External I2C/SMBus adapter drivers
> +#
> +# CONFIG_I2C_PARPORT_LIGHT is not set
> +# CONFIG_I2C_TAOS_EVM is not set
> +
> +#
> +# Graphics adapter I2C/DDC channel drivers
> +#
> +# CONFIG_I2C_VOODOO3 is not set
> +
> +#
> +# Other I2C/SMBus bus drivers
> +#
> +# CONFIG_I2C_PCA_PLATFORM is not set
> +# CONFIG_I2C_STUB is not set
> +
> +#
> +# Miscellaneous I2C Chip support
> +#
> +# CONFIG_DS1682 is not set
> +# CONFIG_SENSORS_PCF8574 is not set
> +# CONFIG_PCF8575 is not set
> +# CONFIG_SENSORS_PCA9539 is not set
> +# CONFIG_SENSORS_MAX6875 is not set
> +# CONFIG_SENSORS_TSL2550 is not set
> +# CONFIG_I2C_DEBUG_CORE is not set
> +# CONFIG_I2C_DEBUG_ALGO is not set
> +# CONFIG_I2C_DEBUG_BUS is not set
> +# CONFIG_I2C_DEBUG_CHIP is not set
> +# CONFIG_SPI is not set
> +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=3Dy
> +# CONFIG_GPIOLIB is not set
> +# CONFIG_W1 is not set
> +# CONFIG_POWER_SUPPLY is not set
> +# CONFIG_HWMON is not set
> +# CONFIG_THERMAL is not set
> +# CONFIG_THERMAL_HWMON is not set
> +# CONFIG_WATCHDOG is not set
> +CONFIG_SSB_POSSIBLE=3Dy
> +
> +#
> +# Sonics Silicon Backplane
> +#
> +# CONFIG_SSB is not set
> +
> +#
> +# Multifunction device drivers
> +#
> +# CONFIG_MFD_CORE is not set
> +# CONFIG_MFD_SM501 is not set
> +# CONFIG_HTC_PASIC3 is not set
> +# CONFIG_TWL4030_CORE is not set
> +# CONFIG_MFD_TMIO is not set
> +# CONFIG_PMIC_DA903X is not set
> +# CONFIG_MFD_WM8400 is not set
> +# CONFIG_MFD_WM8350_I2C is not set
> +# CONFIG_MFD_PCF50633 is not set
> +# CONFIG_REGULATOR is not set
> +
> +#
> +# Multimedia devices
> +#
> +
> +#
> +# Multimedia core support
> +#
> +# CONFIG_VIDEO_DEV is not set
> +# CONFIG_DVB_CORE is not set
> +# CONFIG_VIDEO_MEDIA is not set
> +
> +#
> +# Multimedia drivers
> +#
> +# CONFIG_DAB is not set
> +
> +#
> +# Graphics support
> +#
> +# CONFIG_AGP is not set
> +# CONFIG_DRM is not set
> +# CONFIG_VGASTATE is not set
> +# CONFIG_VIDEO_OUTPUT_CONTROL is not set
> +# CONFIG_FB is not set
> +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
> +
> +#
> +# Display device support
> +#
> +# CONFIG_DISPLAY_SUPPORT is not set
> +
> +#
> +# Console display driver support
> +#
> +# CONFIG_VGA_CONSOLE is not set
> +CONFIG_DUMMY_CONSOLE=3Dy
> +# CONFIG_SOUND is not set
> +# CONFIG_HID_SUPPORT is not set
> +# CONFIG_USB_SUPPORT is not set
> +# CONFIG_UWB is not set
> +# CONFIG_MMC is not set
> +# CONFIG_MEMSTICK is not set
> +# CONFIG_NEW_LEDS is not set
> +# CONFIG_ACCESSIBILITY is not set
> +# CONFIG_INFINIBAND is not set
> +# CONFIG_EDAC is not set
> +CONFIG_RTC_LIB=3Dy
> +CONFIG_RTC_CLASS=3Dy
> +CONFIG_RTC_HCTOSYS=3Dy
> +CONFIG_RTC_HCTOSYS_DEVICE=3D"rtc1"
> +# CONFIG_RTC_DEBUG is not set
> +
> +#
> +# RTC interfaces
> +#
> +CONFIG_RTC_INTF_SYSFS=3Dy
> +CONFIG_RTC_INTF_PROC=3Dy
> +CONFIG_RTC_INTF_DEV=3Dy
> +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> +# CONFIG_RTC_DRV_TEST is not set
> +
> +#
> +# I2C RTC drivers
> +#
> +# CONFIG_RTC_DRV_DS1307 is not set
> +# CONFIG_RTC_DRV_DS1374 is not set
> +# CONFIG_RTC_DRV_DS1672 is not set
> +# CONFIG_RTC_DRV_MAX6900 is not set
> +# CONFIG_RTC_DRV_RS5C372 is not set
> +# CONFIG_RTC_DRV_ISL1208 is not set
> +# CONFIG_RTC_DRV_X1205 is not set
> +# CONFIG_RTC_DRV_PCF8563 is not set
> +# CONFIG_RTC_DRV_PCF8583 is not set
> +CONFIG_RTC_DRV_M41T80=3Dy
> +# CONFIG_RTC_DRV_M41T80_WDT is not set
> +# CONFIG_RTC_DRV_S35390A is not set
> +# CONFIG_RTC_DRV_FM3130 is not set
> +# CONFIG_RTC_DRV_RX8581 is not set
> +
> +#
> +# SPI RTC drivers
> +#
> +
> +#
> +# Platform RTC drivers
> +#
> +# CONFIG_RTC_DRV_CMOS is not set
> +# CONFIG_RTC_DRV_DS1286 is not set
> +# CONFIG_RTC_DRV_DS1511 is not set
> +# CONFIG_RTC_DRV_DS1553 is not set
> +# CONFIG_RTC_DRV_DS1742 is not set
> +# CONFIG_RTC_DRV_STK17TA8 is not set
> +# CONFIG_RTC_DRV_M48T86 is not set
> +# CONFIG_RTC_DRV_M48T35 is not set
> +# CONFIG_RTC_DRV_M48T59 is not set
> +# CONFIG_RTC_DRV_BQ4802 is not set
> +# CONFIG_RTC_DRV_V3020 is not set
> +
> +#
> +# on-CPU RTC drivers
> +#
> +# CONFIG_RTC_DRV_GENERIC is not set
> +CONFIG_RTC_DRV_MPC5121=3Dy
> +CONFIG_DMADEVICES=3Dy
> +
> +#
> +# DMA Devices
> +#
> +# CONFIG_FSL_DMA is not set
> +CONFIG_MPC512X_DMA=3Dy
> +CONFIG_DMA_ENGINE=3Dy
> +
> +#
> +# DMA Clients
> +#
> +# CONFIG_NET_DMA is not set
> +# CONFIG_ASYNC_TX_DMA is not set
> +CONFIG_DMATEST=3Dm
> +# CONFIG_AUXDISPLAY is not set
> +# CONFIG_UIO is not set
> +# CONFIG_STAGING is not set
> +
> +#
> +# File systems
> +#
> +CONFIG_EXT2_FS=3Dy
> +# CONFIG_EXT2_FS_XATTR is not set
> +CONFIG_EXT2_FS_XIP=3Dy
> +# CONFIG_EXT3_FS is not set
> +# CONFIG_EXT4_FS is not set
> +CONFIG_FS_XIP=3Dy
> +# CONFIG_REISERFS_FS is not set
> +# CONFIG_JFS_FS is not set
> +# CONFIG_FS_POSIX_ACL is not set
> +CONFIG_FILE_LOCKING=3Dy
> +# CONFIG_XFS_FS is not set
> +# CONFIG_OCFS2_FS is not set
> +# CONFIG_BTRFS_FS is not set
> +# CONFIG_DNOTIFY is not set
> +# CONFIG_INOTIFY is not set
> +# CONFIG_QUOTA is not set
> +# CONFIG_AUTOFS_FS is not set
> +# CONFIG_AUTOFS4_FS is not set
> +# CONFIG_FUSE_FS is not set
> +
> +#
> +# Caches
> +#
> +# CONFIG_FSCACHE is not set
> +
> +#
> +# CD-ROM/DVD Filesystems
> +#
> +# CONFIG_ISO9660_FS is not set
> +# CONFIG_UDF_FS is not set
> +
> +#
> +# DOS/FAT/NT Filesystems
> +#
> +# CONFIG_MSDOS_FS is not set
> +# CONFIG_VFAT_FS is not set
> +# CONFIG_NTFS_FS is not set
> +
> +#
> +# Pseudo filesystems
> +#
> +CONFIG_PROC_FS=3Dy
> +# CONFIG_PROC_KCORE is not set
> +CONFIG_PROC_SYSCTL=3Dy
> +CONFIG_PROC_PAGE_MONITOR=3Dy
> +CONFIG_SYSFS=3Dy
> +CONFIG_TMPFS=3Dy
> +# CONFIG_TMPFS_POSIX_ACL is not set
> +# CONFIG_HUGETLB_PAGE is not set
> +# CONFIG_CONFIGFS_FS is not set
> +CONFIG_MISC_FILESYSTEMS=3Dy
> +# CONFIG_ADFS_FS is not set
> +# CONFIG_AFFS_FS is not set
> +# CONFIG_HFS_FS is not set
> +# CONFIG_HFSPLUS_FS is not set
> +# CONFIG_BEFS_FS is not set
> +# CONFIG_BFS_FS is not set
> +# CONFIG_EFS_FS is not set
> +CONFIG_JFFS2_FS=3Dy
> +CONFIG_JFFS2_FS_DEBUG=3D0
> +CONFIG_JFFS2_FS_WRITEBUFFER=3Dy
> +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
> +# CONFIG_JFFS2_SUMMARY is not set
> +# CONFIG_JFFS2_FS_XATTR is not set
> +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
> +CONFIG_JFFS2_ZLIB=3Dy
> +# CONFIG_JFFS2_LZO is not set
> +CONFIG_JFFS2_RTIME=3Dy
> +# CONFIG_JFFS2_RUBIN is not set
> +CONFIG_UBIFS_FS=3Dy
> +# CONFIG_UBIFS_FS_XATTR is not set
> +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
> +CONFIG_UBIFS_FS_LZO=3Dy
> +CONFIG_UBIFS_FS_ZLIB=3Dy
> +# CONFIG_UBIFS_FS_DEBUG is not set
> +# CONFIG_CRAMFS is not set
> +# CONFIG_SQUASHFS is not set
> +# CONFIG_VXFS_FS is not set
> +# CONFIG_MINIX_FS is not set
> +# CONFIG_OMFS_FS is not set
> +# CONFIG_HPFS_FS is not set
> +# CONFIG_QNX4FS_FS is not set
> +# CONFIG_ROMFS_FS is not set
> +# CONFIG_SYSV_FS is not set
> +# CONFIG_UFS_FS is not set
> +# CONFIG_NILFS2_FS is not set
> +CONFIG_NETWORK_FILESYSTEMS=3Dy
> +CONFIG_NFS_FS=3Dy
> +CONFIG_NFS_V3=3Dy
> +# CONFIG_NFS_V3_ACL is not set
> +# CONFIG_NFS_V4 is not set
> +CONFIG_ROOT_NFS=3Dy
> +# CONFIG_NFSD is not set
> +CONFIG_LOCKD=3Dy
> +CONFIG_LOCKD_V4=3Dy
> +CONFIG_NFS_COMMON=3Dy
> +CONFIG_SUNRPC=3Dy
> +# CONFIG_RPCSEC_GSS_KRB5 is not set
> +# CONFIG_RPCSEC_GSS_SPKM3 is not set
> +# CONFIG_SMB_FS is not set
> +# CONFIG_CIFS is not set
> +# CONFIG_NCP_FS is not set
> +# CONFIG_CODA_FS is not set
> +# CONFIG_AFS_FS is not set
> +
> +#
> +# Partition Types
> +#
> +# CONFIG_PARTITION_ADVANCED is not set
> +CONFIG_MSDOS_PARTITION=3Dy
> +# CONFIG_NLS is not set
> +# CONFIG_DLM is not set
> +# CONFIG_BINARY_PRINTF is not set
> +
> +#
> +# Library routines
> +#
> +CONFIG_BITREVERSE=3Dy
> +CONFIG_GENERIC_FIND_LAST_BIT=3Dy
> +# CONFIG_CRC_CCITT is not set
> +CONFIG_CRC16=3Dy
> +# CONFIG_CRC_T10DIF is not set
> +# CONFIG_CRC_ITU_T is not set
> +CONFIG_CRC32=3Dy
> +# CONFIG_CRC7 is not set
> +# CONFIG_LIBCRC32C is not set
> +CONFIG_ZLIB_INFLATE=3Dy
> +CONFIG_ZLIB_DEFLATE=3Dy
> +CONFIG_LZO_COMPRESS=3Dy
> +CONFIG_LZO_DECOMPRESS=3Dy
> +CONFIG_DECOMPRESS_GZIP=3Dy
> +CONFIG_DECOMPRESS_BZIP2=3Dy
> +CONFIG_DECOMPRESS_LZMA=3Dy
> +CONFIG_HAS_IOMEM=3Dy
> +CONFIG_HAS_IOPORT=3Dy
> +CONFIG_HAS_DMA=3Dy
> +CONFIG_HAVE_LMB=3Dy
> +CONFIG_NLATTR=3Dy
> +
> +#
> +# Kernel hacking
> +#
> +# CONFIG_PRINTK_TIME is not set
> +# CONFIG_ENABLE_WARN_DEPRECATED is not set
> +# CONFIG_ENABLE_MUST_CHECK is not set
> +CONFIG_FRAME_WARN=3D1024
> +# CONFIG_MAGIC_SYSRQ is not set
> +# CONFIG_UNUSED_SYMBOLS is not set
> +# CONFIG_DEBUG_FS is not set
> +# CONFIG_HEADERS_CHECK is not set
> +# CONFIG_DEBUG_KERNEL is not set
> +CONFIG_DEBUG_BUGVERBOSE=3Dy
> +CONFIG_DEBUG_MEMORY_INIT=3Dy
> +# CONFIG_RCU_CPU_STALL_DETECTOR is not set
> +# CONFIG_LATENCYTOP is not set
> +# CONFIG_SYSCTL_SYSCALL_CHECK is not set
> +CONFIG_HAVE_FUNCTION_TRACER=3Dy
> +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=3Dy
> +CONFIG_HAVE_DYNAMIC_FTRACE=3Dy
> +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=3Dy
> +CONFIG_TRACING_SUPPORT=3Dy
> +
> +#
> +# Tracers
> +#
> +# CONFIG_FUNCTION_TRACER is not set
> +# CONFIG_SCHED_TRACER is not set
> +# CONFIG_CONTEXT_SWITCH_TRACER is not set
> +# CONFIG_EVENT_TRACER is not set
> +# CONFIG_BOOT_TRACER is not set
> +# CONFIG_TRACE_BRANCH_PROFILING is not set
> +# CONFIG_STACK_TRACER is not set
> +# CONFIG_KMEMTRACE is not set
> +# CONFIG_WORKQUEUE_TRACER is not set
> +# CONFIG_BLK_DEV_IO_TRACE is not set
> +# CONFIG_SAMPLES is not set
> +CONFIG_HAVE_ARCH_KGDB=3Dy
> +CONFIG_PRINT_STACK_DEPTH=3D64
> +# CONFIG_IRQSTACKS is not set
> +# CONFIG_BOOTX_TEXT is not set
> +# CONFIG_PPC_EARLY_DEBUG is not set
> +
> +#
> +# Security options
> +#
> +# CONFIG_KEYS is not set
> +# CONFIG_SECURITY is not set
> +# CONFIG_SECURITYFS is not set
> +# CONFIG_SECURITY_FILE_CAPABILITIES is not set
> +CONFIG_CRYPTO=3Dy
> +
> +#
> +# Crypto core or helper
> +#
> +# CONFIG_CRYPTO_FIPS is not set
> +CONFIG_CRYPTO_ALGAPI=3Dy
> +CONFIG_CRYPTO_ALGAPI2=3Dy
> +# CONFIG_CRYPTO_MANAGER is not set
> +# CONFIG_CRYPTO_MANAGER2 is not set
> +# CONFIG_CRYPTO_GF128MUL is not set
> +# CONFIG_CRYPTO_NULL is not set
> +# CONFIG_CRYPTO_CRYPTD is not set
> +# CONFIG_CRYPTO_AUTHENC is not set
> +# CONFIG_CRYPTO_TEST is not set
> +
> +#
> +# Authenticated Encryption with Associated Data
> +#
> +# CONFIG_CRYPTO_CCM is not set
> +# CONFIG_CRYPTO_GCM is not set
> +# CONFIG_CRYPTO_SEQIV is not set
> +
> +#
> +# Block modes
> +#
> +# CONFIG_CRYPTO_CBC is not set
> +# CONFIG_CRYPTO_CTR is not set
> +# CONFIG_CRYPTO_CTS is not set
> +# CONFIG_CRYPTO_ECB is not set
> +# CONFIG_CRYPTO_LRW is not set
> +# CONFIG_CRYPTO_PCBC is not set
> +# CONFIG_CRYPTO_XTS is not set
> +
> +#
> +# Hash modes
> +#
> +# CONFIG_CRYPTO_HMAC is not set
> +# CONFIG_CRYPTO_XCBC is not set
> +
> +#
> +# Digest
> +#
> +# CONFIG_CRYPTO_CRC32C is not set
> +# CONFIG_CRYPTO_MD4 is not set
> +# CONFIG_CRYPTO_MD5 is not set
> +# CONFIG_CRYPTO_MICHAEL_MIC is not set
> +# CONFIG_CRYPTO_RMD128 is not set
> +# CONFIG_CRYPTO_RMD160 is not set
> +# CONFIG_CRYPTO_RMD256 is not set
> +# CONFIG_CRYPTO_RMD320 is not set
> +# CONFIG_CRYPTO_SHA1 is not set
> +# CONFIG_CRYPTO_SHA256 is not set
> +# CONFIG_CRYPTO_SHA512 is not set
> +# CONFIG_CRYPTO_TGR192 is not set
> +# CONFIG_CRYPTO_WP512 is not set
> +
> +#
> +# Ciphers
> +#
> +# CONFIG_CRYPTO_AES is not set
> +# CONFIG_CRYPTO_ANUBIS is not set
> +# CONFIG_CRYPTO_ARC4 is not set
> +# CONFIG_CRYPTO_BLOWFISH is not set
> +# CONFIG_CRYPTO_CAMELLIA is not set
> +# CONFIG_CRYPTO_CAST5 is not set
> +# CONFIG_CRYPTO_CAST6 is not set
> +# CONFIG_CRYPTO_DES is not set
> +# CONFIG_CRYPTO_FCRYPT is not set
> +# CONFIG_CRYPTO_KHAZAD is not set
> +# CONFIG_CRYPTO_SALSA20 is not set
> +# CONFIG_CRYPTO_SEED is not set
> +# CONFIG_CRYPTO_SERPENT is not set
> +# CONFIG_CRYPTO_TEA is not set
> +# CONFIG_CRYPTO_TWOFISH is not set
> +
> +#
> +# Compression
> +#
> +CONFIG_CRYPTO_DEFLATE=3Dy
> +# CONFIG_CRYPTO_ZLIB is not set
> +CONFIG_CRYPTO_LZO=3Dy
> +
> +#
> +# Random Number Generation
> +#
> +# CONFIG_CRYPTO_ANSI_CPRNG is not set
> +# CONFIG_CRYPTO_HW is not set
> +CONFIG_PPC_CLOCK=3Dy
> +# CONFIG_VIRTUALIZATION is not set
> --
> 1.6.0.6
>
>
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH 02/12] fs_enet: Add MPC5121 FEC support.
From: Grant Likely @ 2009-05-06 20:33 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, Piotr Ziecik, John Rigby, netdev
In-Reply-To: <1241640919-4650-3-git-send-email-wd@denx.de>
On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <wd@denx.de> wrote:
> From: John Rigby <jrigby@freescale.com>
>
> Add support for MPC512x to fs_enet driver
>
> =A0 =A0drivers/net/fs_enet/*
> =A0 =A0 =A0 =A0Enable fs_enet driver to work 5121 FEC
> =A0 =A0 =A0 =A0Enable it with CONFIG_FS_ENET_MPC5121_FEC
>
> Signed-off-by: John Rigby <jrigby@freescale.com>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: <netdev@vger.kernel.org>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
> ---
> =A0arch/powerpc/include/asm/mpc5121_fec.h | =A0111 ++++++++++++++++++++++=
++++++++++
> =A0drivers/net/fs_enet/Kconfig =A0 =A0 =A0 =A0 =A0 =A0| =A0 10 ++-
> =A0drivers/net/fs_enet/fs_enet-main.c =A0 =A0 | =A0 =A07 ++
> =A0drivers/net/fs_enet/fs_enet.h =A0 =A0 =A0 =A0 =A0| =A0 =A06 ++
> =A0drivers/net/fs_enet/mac-fec.c =A0 =A0 =A0 =A0 =A0| =A0 30 ++++++++-
> =A0drivers/net/fs_enet/mii-fec.c =A0 =A0 =A0 =A0 =A0| =A0 =A07 ++
> =A06 files changed, 166 insertions(+), 5 deletions(-)
> =A0create mode 100644 arch/powerpc/include/asm/mpc5121_fec.h
>
> diff --git a/arch/powerpc/include/asm/mpc5121_fec.h b/arch/powerpc/includ=
e/asm/mpc5121_fec.h
> new file mode 100644
> index 0000000..6bddf0b
> --- /dev/null
> +++ b/arch/powerpc/include/asm/mpc5121_fec.h
> @@ -0,0 +1,111 @@
> +/*
> + * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights rese=
rved.
> + *
> + * Author: John Rigby, <jrigby@freescale.com>
> + *
> + * Modified version of drivers/net/fec.h:
> + *
> + * =A0 =A0 fec.h =A0-- =A0Fast Ethernet Controller for Motorola ColdFire=
SoC
> + * =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0processors.
> + *
> + * =A0 =A0 (C) Copyright 2000-2005, Greg Ungerer (gerg@snapgear.com)
> + * =A0 =A0 (C) Copyright 2000-2001, Lineo (www.lineo.com)
> + *
> + * This is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#ifndef MPC5121_FEC_H
> +#define MPC5121_FEC_H
> +
> +typedef struct fec {
> + =A0 =A0 =A0 u32 fec_reserved0;
> + =A0 =A0 =A0 u32 fec_ievent; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Interrup=
t event reg */
> + =A0 =A0 =A0 u32 fec_imask; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0/* Interr=
upt mask reg */
> + =A0 =A0 =A0 u32 fec_reserved1;
> + =A0 =A0 =A0 u32 fec_r_des_active; =A0 =A0 =A0 =A0 =A0 /* Receive descri=
ptor reg */
> + =A0 =A0 =A0 u32 fec_x_des_active; =A0 =A0 =A0 =A0 =A0 /* Transmit descr=
iptor reg */
> + =A0 =A0 =A0 u32 fec_reserved2[3];
> + =A0 =A0 =A0 u32 fec_ecntrl; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Ethernet=
control reg */
> + =A0 =A0 =A0 u32 fec_reserved3[6];
> + =A0 =A0 =A0 u32 fec_mii_data; =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* MII manage=
frame reg */
> + =A0 =A0 =A0 u32 fec_mii_speed; =A0 =A0 =A0 =A0 =A0 =A0 =A0/* MII speed =
control reg */
> + =A0 =A0 =A0 u32 fec_reserved4[7];
> + =A0 =A0 =A0 u32 fec_mib_ctrlstat; =A0 =A0 =A0 =A0 =A0 /* MIB control/st=
atus reg */
> + =A0 =A0 =A0 u32 fec_reserved5[7];
> + =A0 =A0 =A0 u32 fec_r_cntrl; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0/* Receive =
control reg */
> + =A0 =A0 =A0 u32 fec_reserved6[15];
> + =A0 =A0 =A0 u32 fec_x_cntrl; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0/* Transmit=
Control reg */
> + =A0 =A0 =A0 u32 fec_reserved7[7];
> + =A0 =A0 =A0 u32 fec_addr_low; =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Low 32bits=
MAC address */
> + =A0 =A0 =A0 u32 fec_addr_high; =A0 =A0 =A0 =A0 =A0 =A0 =A0/* High 16bit=
s MAC address */
> + =A0 =A0 =A0 u32 fec_opd; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0/* Opco=
de + Pause duration */
> + =A0 =A0 =A0 u32 fec_reserved8[10];
> + =A0 =A0 =A0 u32 fec_hash_table_high; =A0 =A0 =A0 =A0/* High 32bits hash=
table */
> + =A0 =A0 =A0 u32 fec_hash_table_low; =A0 =A0 =A0 =A0 /* Low 32bits hash =
table */
> + =A0 =A0 =A0 u32 fec_grp_hash_table_high; =A0 =A0/* High 32bits hash tab=
le */
> + =A0 =A0 =A0 u32 fec_grp_hash_table_low; =A0 =A0 /* Low 32bits hash tabl=
e */
> + =A0 =A0 =A0 u32 fec_reserved9[7];
> + =A0 =A0 =A0 u32 fec_x_wmrk; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* FIFO tra=
nsmit water mark */
> + =A0 =A0 =A0 u32 fec_reserved10;
> + =A0 =A0 =A0 u32 fec_r_bound; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0/* FIFO rec=
eive bound reg */
> + =A0 =A0 =A0 u32 fec_r_fstart; =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* FIFO recei=
ve start reg */
> + =A0 =A0 =A0 u32 fec_reserved11[11];
> + =A0 =A0 =A0 u32 fec_r_des_start; =A0 =A0 =A0 =A0 =A0 =A0/* Receive desc=
riptor ring */
> + =A0 =A0 =A0 u32 fec_x_des_start; =A0 =A0 =A0 =A0 =A0 =A0/* Transmit des=
criptor ring */
> + =A0 =A0 =A0 u32 fec_r_buff_size; =A0 =A0 =A0 =A0 =A0 =A0/* Maximum rece=
ive buff size */
> + =A0 =A0 =A0 u32 fec_reserved12[26];
> + =A0 =A0 =A0 u32 fec_dma_control; =A0 =A0 =A0 =A0 =A0 =A0/* DMA Endian a=
nd other ctrl */
> +} fec_t;
> +
> +/*
> + * =A0 =A0 Define the buffer descriptor structure.
> + */
> +typedef struct bufdesc {
> + =A0 =A0 =A0 ushort =A0cbd_sc; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* Contro=
l and status info */
> + =A0 =A0 =A0 ushort =A0cbd_datlen; =A0 =A0 =A0 =A0 =A0 =A0 /* Data lengt=
h */
> + =A0 =A0 =A0 uint =A0 =A0cbd_bufaddr; =A0 =A0 =A0 =A0 =A0 =A0/* Buffer a=
ddress */
> +} cbd_t;
> +
> +/*
> + * =A0 =A0 The following definitions courtesy of commproc.h, which where
> + * =A0 =A0 Copyright (c) 1997 Dan Malek (dmalek@jlc.net).
> + */
> +#define BD_SC_WRAP =A0 =A0 =A0 =A0 =A0 =A0 ((ushort)0x2000)
> +
> +/*
> + * Buffer descriptor control/status used by Ethernet receive.
> + */
> +#define BD_ENET_RX_EMPTY =A0 =A0 =A0 ((ushort)0x8000)
> +#define BD_ENET_RX_WRAP =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0((ushort)0x2000)
> +#define BD_ENET_RX_INTR =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0((ushort)0x1000)
> +#define BD_ENET_RX_LAST =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0((ushort)0x0800)
> +#define BD_ENET_RX_FIRST =A0 =A0 =A0 ((ushort)0x0400)
> +#define BD_ENET_RX_MISS =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0((ushort)0x0100)
> +#define BD_ENET_RX_LG =A0 =A0 =A0 =A0 =A0((ushort)0x0020)
> +#define BD_ENET_RX_NO =A0 =A0 =A0 =A0 =A0((ushort)0x0010)
> +#define BD_ENET_RX_SH =A0 =A0 =A0 =A0 =A0((ushort)0x0008)
> +#define BD_ENET_RX_CR =A0 =A0 =A0 =A0 =A0((ushort)0x0004)
> +#define BD_ENET_RX_OV =A0 =A0 =A0 =A0 =A0((ushort)0x0002)
> +#define BD_ENET_RX_CL =A0 =A0 =A0 =A0 =A0((ushort)0x0001)
> +#define BD_ENET_RX_STATS =A0 =A0 =A0 ((ushort)0x013f) =A0 =A0 =A0 =A0/* =
All status bits */
> +
> +/*
> + * Buffer descriptor control/status used by Ethernet transmit.
> + */
> +#define BD_ENET_TX_READY =A0 =A0 =A0 ((ushort)0x8000)
> +#define BD_ENET_TX_PAD =A0 =A0 =A0 =A0 ((ushort)0x4000)
> +#define BD_ENET_TX_WRAP =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0((ushort)0x2000)
> +#define BD_ENET_TX_INTR =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0((ushort)0x1000)
> +#define BD_ENET_TX_LAST =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0((ushort)0x0800)
> +#define BD_ENET_TX_TC =A0 =A0 =A0 =A0 =A0((ushort)0x0400)
> +#define BD_ENET_TX_DEF =A0 =A0 =A0 =A0 ((ushort)0x0200)
> +#define BD_ENET_TX_HB =A0 =A0 =A0 =A0 =A0((ushort)0x0100)
> +#define BD_ENET_TX_LC =A0 =A0 =A0 =A0 =A0((ushort)0x0080)
> +#define BD_ENET_TX_RL =A0 =A0 =A0 =A0 =A0((ushort)0x0040)
> +#define BD_ENET_TX_UN =A0 =A0 =A0 =A0 =A0((ushort)0x0002)
> +#define BD_ENET_TX_CSL =A0 =A0 =A0 =A0 ((ushort)0x0001)
> +#define BD_ENET_TX_STATS =A0 =A0 =A0 ((ushort)0x03ff) =A0 =A0 =A0 =A0/* =
All status bits */
> +
> +#endif /* MPC5121_FEC_H */
> diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/fs_enet/Kconfig
> index 562ea68..fc073b5 100644
> --- a/drivers/net/fs_enet/Kconfig
> +++ b/drivers/net/fs_enet/Kconfig
> @@ -1,9 +1,13 @@
> =A0config FS_ENET
> =A0 =A0 =A0 =A0tristate "Freescale Ethernet Driver"
> - =A0 =A0 =A0 depends on CPM1 || CPM2
> + =A0 =A0 =A0 depends on CPM1 || CPM2 || PPC_MPC512x
> =A0 =A0 =A0 =A0select MII
> =A0 =A0 =A0 =A0select PHYLIB
>
> +config FS_ENET_MPC5121_FEC
> + =A0 =A0 =A0 def_bool y if (FS_ENET && PPC_MPC512x)
> + =A0 =A0 =A0 select FS_ENET_HAS_FEC
> +
> =A0config FS_ENET_HAS_SCC
> =A0 =A0 =A0 =A0bool "Chip has an SCC usable for ethernet"
> =A0 =A0 =A0 =A0depends on FS_ENET && (CPM1 || CPM2)
> @@ -16,13 +20,13 @@ config FS_ENET_HAS_FCC
>
> =A0config FS_ENET_HAS_FEC
> =A0 =A0 =A0 =A0bool "Chip has an FEC usable for ethernet"
> - =A0 =A0 =A0 depends on FS_ENET && CPM1
> + =A0 =A0 =A0 depends on FS_ENET && (CPM1 || FS_ENET_MPC5121_FEC)
> =A0 =A0 =A0 =A0select FS_ENET_MDIO_FEC
> =A0 =A0 =A0 =A0default y
>
> =A0config FS_ENET_MDIO_FEC
> =A0 =A0 =A0 =A0tristate "MDIO driver for FEC"
> - =A0 =A0 =A0 depends on FS_ENET && CPM1
> + =A0 =A0 =A0 depends on FS_ENET && (CPM1 || FS_ENET_MPC5121_FEC)
>
> =A0config FS_ENET_MDIO_FCC
> =A0 =A0 =A0 =A0tristate "MDIO driver for FCC"
> diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_=
enet-main.c
> index f996a1a..4170d33 100644
> --- a/drivers/net/fs_enet/fs_enet-main.c
> +++ b/drivers/net/fs_enet/fs_enet-main.c
> @@ -1183,11 +1183,18 @@ static struct of_device_id fs_enet_match[] =3D {
> =A0 =A0 =A0 =A0},
> =A0#endif
> =A0#ifdef CONFIG_FS_ENET_HAS_FEC
> +#ifdef CONFIG_FS_ENET_MPC5121_FEC
> + =A0 =A0 =A0 {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 .compatible =3D "fsl,mpc5121-fec",
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 .data =3D (void *)&fs_fec_ops,
> + =A0 =A0 =A0 },
> +#else
> =A0 =A0 =A0 =A0{
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0.compatible =3D "fsl,pq1-fec-enet",
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0.data =3D (void *)&fs_fec_ops,
> =A0 =A0 =A0 =A0},
> =A0#endif
> +#endif
Hmmm. A lot of these #ifdefs in here. Does this have a multiplatform
impact? Not to mention the fact that it's just plain ugly. :-)
g.
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH 01/12] fs_enet: Use defines to set driver tunables.
From: Grant Likely @ 2009-05-06 20:35 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, Piotr Ziecik, netdev
In-Reply-To: <1241640919-4650-2-git-send-email-wd@denx.de>
On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <wd@denx.de> wrote:
> From: Piotr Ziecik <kosmo@semihalf.com>
>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: <netdev@vger.kernel.org>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
Not seeing much benefit to this patch, and the (non-existant) patch
description doesn't really help me here either.
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH 03/12] fs_enet: Add FEC TX Alignment workaround for MPC5121.
From: Grant Likely @ 2009-05-06 20:37 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, Piotr Ziecik, John Rigby, netdev
In-Reply-To: <1241640919-4650-4-git-send-email-wd@denx.de>
On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <wd@denx.de> wrote:
> From: John Rigby <jrigby@freescale.com>
>
> The FEC on 5121 has problems with misaligned tx buffers.
> The RM says any alignment is ok but empirical results
> show that packet buffers ending in 0x1E will sometimes
> hang the FEC. =A0Other bad alignment does not hang but will
> cause silent TX failures resulting in about a 1% packet
> loss as tested by ping -f from a remote host.
>
> This patch is a work around that copies every tx packet
> to an aligned skb before sending.
OUCH!
> diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_=
enet-main.c
> index 4170d33..c83ffc3 100644
> --- a/drivers/net/fs_enet/fs_enet-main.c
> +++ b/drivers/net/fs_enet/fs_enet-main.c
> @@ -594,6 +594,37 @@ void fs_cleanup_bds(struct net_device *dev)
>
> =A0/*********************************************************************=
*************/
>
> +#ifdef CONFIG_FS_ENET_FEC_TX_ALIGN_WORKAROUND
> +static struct sk_buff *tx_skb_align_workaround(struct net_device *dev,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 struct sk_buff *skb)
> +{
> + =A0 =A0 =A0 struct sk_buff *new_skb;
> +
> + =A0 =A0 =A0 /* Alloc new skb */
> + =A0 =A0 =A0 new_skb =3D dev_alloc_skb(ENET_RX_FRSIZE + 32);
> + =A0 =A0 =A0 if (!new_skb) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 printk(KERN_WARNING DRV_MODULE_NAME
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 ": %s Memor=
y squeeze, dropping tx packet.\n",
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 dev->name);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return NULL;
> + =A0 =A0 =A0 }
> +
> + =A0 =A0 =A0 /* Make sure new skb is properly aligned */
> + =A0 =A0 =A0 skb_align(new_skb, 32);
> +
> + =A0 =A0 =A0 /* Copy data to new skb ... */
> + =A0 =A0 =A0 skb_copy_from_linear_data(skb, new_skb->data, skb->len);
> + =A0 =A0 =A0 skb_put(new_skb, skb->len);
> +
> + =A0 =A0 =A0 /* ... and free an old one */
> + =A0 =A0 =A0 dev_kfree_skb_any(skb);
> +
> + =A0 =A0 =A0 return new_skb;
> +}
> +#else
> +#define tx_skb_align_workaround(dev, skb) (skb)
> +#endif
Another use of #ifdef blocks. What is the multiplatform impact?
g.
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH 04/12] mpc5121: Added reset module registers representation.
From: Grant Likely @ 2009-05-06 20:39 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, Piotr Ziecik
In-Reply-To: <1241640919-4650-5-git-send-email-wd@denx.de>
On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <wd@denx.de> wrote:
> From: Piotr Ziecik <kosmo@semihalf.com>
>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
No patch description. I would also like to see this patch merged with
the actual user of it since it is so small.
> ---
> =A0arch/powerpc/include/asm/mpc512x.h | =A0 13 +++++++++++++
> =A01 files changed, 13 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/mpc512x.h b/arch/powerpc/include/as=
m/mpc512x.h
> index c48a165..ea50d8d 100644
> --- a/arch/powerpc/include/asm/mpc512x.h
> +++ b/arch/powerpc/include/asm/mpc512x.h
> @@ -16,6 +16,19 @@
> =A0#ifndef __ASM_POWERPC_MPC512x_H__
> =A0#define __ASM_POWERPC_MPC512x_H__
>
> +/* MPC512x Reset module registers */
> +struct mpc512x_reset_module {
> + =A0 =A0 =A0 u32 =A0 =A0 rcwlr; =A0/* Reset Configuration Word Low Regis=
ter */
> + =A0 =A0 =A0 u32 =A0 =A0 rcwhr; =A0/* Reset Configuration Word High Regi=
ster */
> + =A0 =A0 =A0 u32 =A0 =A0 reserved1;
> + =A0 =A0 =A0 u32 =A0 =A0 reserved2;
> + =A0 =A0 =A0 u32 =A0 =A0 rsr; =A0 =A0/* Reset Status Register */
> + =A0 =A0 =A0 u32 =A0 =A0 rmr; =A0 =A0/* Reset Mode Register */
> + =A0 =A0 =A0 u32 =A0 =A0 rpr; =A0 =A0/* Reset Protection Register */
> + =A0 =A0 =A0 u32 =A0 =A0 rcr; =A0 =A0/* Reset Control Register */
> + =A0 =A0 =A0 u32 =A0 =A0 rcer; =A0 /* Reset Control Enable Register */
> +} __attribute__ ((__packed__));
__attribute__((__packed__)); is unnecessary.
g.
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH 01/04] mpc5121: prepare support for additional boards
From: Wolfgang Denk @ 2009-05-06 20:40 UTC (permalink / raw)
To: Grant Likely; +Cc: linuxppc-dev
In-Reply-To: <fa686aa40905061329m352cfbah1afa2d07fe5930c7@mail.gmail.com>
Dear Grant,
In message <fa686aa40905061329m352cfbah1afa2d07fe5930c7@mail.gmail.com> you wrote:
>
> I'll ignore this one for the time being. After stuff is actually
> merged and at about -rc2 time is the time to muck around with
> defconfigs.
Did you receive the first patch series as well:
[PATCH 00/16] Add support for MPC512x etc. ?
It seems it takes ages before linuxppc-dev delivers the messages?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
It is easier to change the specification to fit the program than vice
versa.
^ permalink raw reply
* Re: [PATCH 02/12] fs_enet: Add MPC5121 FEC support.
From: David Miller @ 2009-05-06 20:40 UTC (permalink / raw)
To: wd; +Cc: kosmo, jrigby, netdev, linuxppc-dev
In-Reply-To: <1241640919-4650-3-git-send-email-wd@denx.de>
Would you be offended if I tell you that this is a horrible patch
submission?
Your introductory email indicates 16 patches, yet the series indicates
there were 12, and that intro email is only posted to the linuxppc-dev
list for people to read. Nobody on netdev nor other interested
parties that get CC:'d along the line are able to read what this patch
series is about.
Since only some patches are CC:'d to netdev I have no idea if I should
apply these or they are dependent on some other patches in the series
that you didn't send here to netdev.
What a mess... how can any maintainer figure out what patch is what,
and what tree you expect these patches to even get applied to?
I'm definitely sending all of the copies I have received to /dev/null,
you need to submit this work properly.
^ permalink raw reply
* Re: [PATCH 05/12] mpc5121ads: Added Reset Module node to DTS.
From: Grant Likely @ 2009-05-06 20:40 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, Piotr Ziecik
In-Reply-To: <1241640919-4650-6-git-send-email-wd@denx.de>
On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <wd@denx.de> wrote:
> From: Piotr Ziecik <kosmo@semihalf.com>
>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
Missing patch description. Otherwise looks okay.
g.
> ---
> =A0arch/powerpc/boot/dts/mpc5121ads.dts | =A0 =A05 +++++
> =A01 files changed, 5 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts=
/mpc5121ads.dts
> index c2b8dbf..1b83a9d 100644
> --- a/arch/powerpc/boot/dts/mpc5121ads.dts
> +++ b/arch/powerpc/boot/dts/mpc5121ads.dts
> @@ -166,6 +166,11 @@
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupt-parent =3D < &ip=
ic >;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0};
>
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 reset@e00 { =A0 =A0 // Reset module
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 compatible =3D "fsl,mpc5121=
-reset";
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0xe00 0x100>;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 };
> +
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0clock@f00 { =A0 =A0 // Clock control
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0compatible =3D "fsl,mpc512=
1-clock";
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0reg =3D <0xf00 0x100>;
> --
> 1.6.0.6
>
>
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH 02/12] fs_enet: Add MPC5121 FEC support.
From: Scott Wood @ 2009-05-06 20:41 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: John Rigby, linuxppc-dev, Piotr Ziecik, netdev
In-Reply-To: <1241640919-4650-3-git-send-email-wd@denx.de>
Wolfgang Denk wrote:
> +/*
> + * Define the buffer descriptor structure.
> + */
> +typedef struct bufdesc {
> + ushort cbd_sc; /* Control and status info */
> + ushort cbd_datlen; /* Data length */
> + uint cbd_bufaddr; /* Buffer address */
> +} cbd_t;
> +
> +/*
> + * The following definitions courtesy of commproc.h, which where
> + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net).
> + */
> +#define BD_SC_WRAP ((ushort)0x2000)
> +
> +/*
> + * Buffer descriptor control/status used by Ethernet receive.
> + */
> +#define BD_ENET_RX_EMPTY ((ushort)0x8000)
> +#define BD_ENET_RX_WRAP ((ushort)0x2000)
> +#define BD_ENET_RX_INTR ((ushort)0x1000)
> +#define BD_ENET_RX_LAST ((ushort)0x0800)
> +#define BD_ENET_RX_FIRST ((ushort)0x0400)
> +#define BD_ENET_RX_MISS ((ushort)0x0100)
> +#define BD_ENET_RX_LG ((ushort)0x0020)
> +#define BD_ENET_RX_NO ((ushort)0x0010)
> +#define BD_ENET_RX_SH ((ushort)0x0008)
> +#define BD_ENET_RX_CR ((ushort)0x0004)
> +#define BD_ENET_RX_OV ((ushort)0x0002)
> +#define BD_ENET_RX_CL ((ushort)0x0001)
> +#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
> +
> +/*
> + * Buffer descriptor control/status used by Ethernet transmit.
> + */
> +#define BD_ENET_TX_READY ((ushort)0x8000)
> +#define BD_ENET_TX_PAD ((ushort)0x4000)
> +#define BD_ENET_TX_WRAP ((ushort)0x2000)
> +#define BD_ENET_TX_INTR ((ushort)0x1000)
> +#define BD_ENET_TX_LAST ((ushort)0x0800)
> +#define BD_ENET_TX_TC ((ushort)0x0400)
> +#define BD_ENET_TX_DEF ((ushort)0x0200)
> +#define BD_ENET_TX_HB ((ushort)0x0100)
> +#define BD_ENET_TX_LC ((ushort)0x0080)
> +#define BD_ENET_TX_RL ((ushort)0x0040)
> +#define BD_ENET_TX_UN ((ushort)0x0002)
> +#define BD_ENET_TX_CSL ((ushort)0x0001)
> +#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
All of the above is duplicative (with even the same names) of stuff in
asm/cpm.h. Beyond just the duplication, what happens if both CPM2 and
512x are enabled in the same kernel?
-Scott
^ permalink raw reply
* Re: [PATCH 06/12] mpc5121: Added NAND Flash Controller driver.
From: Grant Likely @ 2009-05-06 20:59 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, linux-mtd, Piotr Ziecik
In-Reply-To: <1241640919-4650-7-git-send-email-wd@denx.de>
On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <wd@denx.de> wrote:
> From: Piotr Ziecik <kosmo@semihalf.com>
>
> This patch adds NAND Flash Controller driver for MPC5121
> revision 2. All device features, except hardware ECC and
> power management, are supported.
>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: <linux-mtd@lists.infradead.org>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
> ---
> =A0arch/powerpc/include/asm/mpc5121_nfc.h =A0 =A0 =A0 | =A0100 +++
> =A0arch/powerpc/platforms/512x/mpc512x_shared.c | =A0 =A01 +
> =A0drivers/mtd/nand/Kconfig =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0=
=A07 +
> =A0drivers/mtd/nand/Makefile =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| =A0=
=A01 +
> =A0drivers/mtd/nand/mpc5121_nfc.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0855 ++=
++++++++++++++++++++++++
> =A05 files changed, 964 insertions(+), 0 deletions(-)
> =A0create mode 100644 arch/powerpc/include/asm/mpc5121_nfc.h
> =A0create mode 100644 drivers/mtd/nand/mpc5121_nfc.c
>
> diff --git a/arch/powerpc/include/asm/mpc5121_nfc.h b/arch/powerpc/includ=
e/asm/mpc5121_nfc.h
> new file mode 100644
> index 0000000..b96a5b9
> --- /dev/null
> +++ b/arch/powerpc/include/asm/mpc5121_nfc.h
[... bunch of #defines trimmed]
There is only one user of this. It should be moved into the driver .c
file. Otherwise okay.
> diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/=
platforms/512x/mpc512x_shared.c
> index d8cd579..7135d89 100644
> --- a/arch/powerpc/platforms/512x/mpc512x_shared.c
> +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
> @@ -71,6 +71,7 @@ void __init mpc512x_init_IRQ(void)
> =A0static struct of_device_id __initdata of_bus_ids[] =3D {
> =A0 =A0 =A0 =A0{ .compatible =3D "fsl,mpc5121-immr", },
> =A0 =A0 =A0 =A0{ .compatible =3D "fsl,mpc5121-localbus", },
> + =A0 =A0 =A0 { .compatible =3D "fsl,mpc5121-nfc", },
This doesn't look right. Shouldn't the NAND controller be hanging of
the IMMR node?
> =A0 =A0 =A0 =A0{},
> =A0};
>
> diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nf=
c.c
> new file mode 100644
> index 0000000..a8da4db
> --- /dev/null
> +++ b/drivers/mtd/nand/mpc5121_nfc.c
> @@ -0,0 +1,855 @@
> +/*
> + * Copyright 2004-2008 Freescale Semiconductor, Inc.
> + * Copyright 2009 Semihalf.
> + *
> + * Based on original driver from Freescale Semiconductor
> + * written by John Rigby <jrigby@freescale.com> on basis
> + * of drivers/mtd/nand/mxc_nand.c. Reworked and extended
> + * Piotr Ziecik <kosmo@semihalf.com>.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/nand.h>
> +#include <linux/mtd/partitions.h>
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +
> +#include <asm/mpc512x.h>
> +#include <asm/mpc5121_nfc.h>
> +
> +#define =A0 =A0 =A0 =A0DRV_NAME =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0"mpc5121_=
nfc"
> +#define =A0 =A0 =A0 =A0DRV_VERSION =A0 =A0 =A0 =A0 =A0 =A0 "0.5"
Is this really necessary (especially the DRV_VERSION thing)?
> +/* Wait for operation complete */
> +static void mpc5121_nfc_done(struct mtd_info *mtd)
> +{
> + =A0 =A0 =A0 struct nand_chip *chip =3D mtd->priv;
> + =A0 =A0 =A0 struct mpc5121_nfc_prv *prv =3D chip->priv;
> + =A0 =A0 =A0 int rv;
> +
> + =A0 =A0 =A0 if ((nfc_read(mtd, NFC_CONFIG2) & NFC_INT) =3D=3D 0) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 nfc_clear(mtd, NFC_CONFIG1, NFC_INT_MASK);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 rv =3D wait_event_timeout(prv->irq_waitq,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 (nfc_read(mtd, NFC_CONFIG2)=
& NFC_INT), NFC_TIMEOUT);
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (!rv)
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 printk(KERN_WARNING DRV_NAM=
E
Throughout this driver printk() calls should really be dev_*() calls.
> +/*
> + * Read NFC configuration from Reset Config Word
> + *
> + * NFC is configured during reset in basis of information stored
> + * in Reset Config Word. There is no other way to set NAND block
> + * size, spare size and bus width.
> + */
> +static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
> +{
> + =A0 =A0 =A0 struct nand_chip *chip =3D mtd->priv;
> + =A0 =A0 =A0 struct mpc512x_reset_module *rm;
> + =A0 =A0 =A0 struct device_node *rmnode;
> + =A0 =A0 =A0 uint rcw_pagesize =3D 0;
> + =A0 =A0 =A0 uint rcw_sparesize =3D 0;
> + =A0 =A0 =A0 uint rcw_width;
> + =A0 =A0 =A0 uint rcwh;
> + =A0 =A0 =A0 uint romloc, ps;
> +
> + =A0 =A0 =A0 rmnode =3D of_find_compatible_node(NULL, NULL, "fsl,mpc5121=
-reset");
> + =A0 =A0 =A0 if (!rmnode) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 printk(KERN_ERR DRV_NAME ": Missing 'fsl,mp=
c5121-reset' "
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 =A0 =A0 =A0 =A0 "node in device tree!\n");
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return -ENODEV;
> + =A0 =A0 =A0 }
A little ugly, but I won't gripe too much about it. I'd rather see a
platform code export some kind of api for manipulating the reset
module (I assume that multiple drivers will need to fiddle with it),
but I'm willing to be pragmatic here in the interest of getting it
merged. It can always be reworked later with little risk.
> +static struct of_platform_driver mpc5121_nfc_driver =3D {
> + =A0 =A0 =A0 .owner =A0 =A0 =A0 =A0 =A0=3D THIS_MODULE,
> + =A0 =A0 =A0 .name =A0 =A0 =A0 =A0 =A0 =3D DRV_NAME,
> + =A0 =A0 =A0 .match_table =A0 =A0=3D mpc5121_nfc_match,
> + =A0 =A0 =A0 .probe =A0 =A0 =A0 =A0 =A0=3D mpc5121_nfc_probe,
> + =A0 =A0 =A0 .remove =A0 =A0 =A0 =A0 =3D __exit_p(mpc5121_nfc_remove),
> + =A0 =A0 =A0 .suspend =A0 =A0 =A0 =A0=3D NULL,
> + =A0 =A0 =A0 .resume =A0 =A0 =A0 =A0 =3D NULL,
2 unnecessary lines. gcc initializes unset fields to 0.
> + =A0 =A0 =A0 .driver =A0 =A0 =A0 =A0 =3D {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 .name =A0 =3D DRV_NAME,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 .owner =A0=3D THIS_MODULE,
> + =A0 =A0 =A0 },
Duplicate settings. Don't need to set both .name/.owner and
.driver.name and .driver.owner.
> +};
> +
> +static int __init mpc5121_nfc_init(void)
> +{
> + =A0 =A0 =A0 if (of_register_platform_driver(&mpc5121_nfc_driver) !=3D 0=
) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 printk(KERN_ERR DRV_NAME ": Driver register=
failed!\n");
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return -ENODEV;
> + =A0 =A0 =A0 }
> + =A0 =A0 =A0 return 0;
Heh. "return of_register_platform_driver(&mpc5121_nfc_driver);" is
sufficient and accepted here.
> +}
> +
> +static void __exit mpc5121_nfc_cleanup(void)
> +{
> + =A0 =A0 =A0 of_unregister_platform_driver(&mpc5121_nfc_driver);
> +}
> +
> +module_init(mpc5121_nfc_init);
Please move this line to just below the mpc5121_nfc_init function.
> +module_exit(mpc5121_nfc_cleanup);
> +
> +MODULE_AUTHOR("Freescale Semiconductor, Inc.");
> +MODULE_DESCRIPTION("MPC5121 NAND MTD driver");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION(DRV_VERSION);
As I alluded to above, I really don't like the MODULE_VERSION think in
mainline code.
I only skimmed the driver, but that being said, other than my comments
it looks pretty good to me.
g.
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH 07/12] mpc5121ads: Clean up and fix NAND description in mpc5121ads DTS.
From: Grant Likely @ 2009-05-06 21:00 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, Piotr Ziecik
In-Reply-To: <1241640919-4650-8-git-send-email-wd@denx.de>
On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <wd@denx.de> wrote:
> From: Piotr Ziecik <kosmo@semihalf.com>
>
> - Removed unused properties.
> - Corrected NAND flash chip size.
>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
Looks okay to me.
g.
> ---
> =A0arch/powerpc/boot/dts/mpc5121ads.dts | =A0 13 ++++---------
> =A01 files changed, 4 insertions(+), 9 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts=
/mpc5121ads.dts
> index 1b83a9d..93fe12a 100644
> --- a/arch/powerpc/boot/dts/mpc5121ads.dts
> +++ b/arch/powerpc/boot/dts/mpc5121ads.dts
> @@ -62,17 +62,12 @@
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupt-parent =3D < &ipic >;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0#address-cells =3D <1>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0#size-cells =3D <1>;
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 bank-width =3D <1>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0// ADS has two Hynix 512MB Nand flash chip=
s in a single
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 // stacked package .
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 // stacked package.
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0chips =3D <2>;
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 nand0@0 {
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 label =3D "nand0";
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0x00000000 0x02000=
000>; =A0// first 32 MB of chip 0
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 };
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 nand1@20000000 {
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 label =3D "nand1";
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0x20000000 0x02000=
000>; =A0// first 32 MB of chip 1
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 nand@0 {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 label =3D "nand";
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0x00000000 0x40000=
000>; =A0// 512MB + 512MB
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0};
> =A0 =A0 =A0 =A0};
>
> --
> 1.6.0.6
>
>
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH 08/12] mpc5121: Added I2C support.
From: Grant Likely @ 2009-05-06 21:01 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, Piotr Ziecik, linux-i2c
In-Reply-To: <1241640919-4650-9-git-send-email-wd@denx.de>
On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <wd@denx.de> wrote:
> From: Piotr Ziecik <kosmo@semihalf.com>
>
> - Enabled I2C interrupts on MPC5121.
> - Updated Kconfig for i2c-mpc driver.
I think this workaround belongs in the driver itself.
g.
>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: <linux-i2c@vger.kernel.org>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
> ---
> =A0arch/powerpc/platforms/512x/mpc5121_ads.c =A0 =A0| =A0 =A02 ++
> =A0arch/powerpc/platforms/512x/mpc512x.h =A0 =A0 =A0 =A0| =A0 =A01 +
> =A0arch/powerpc/platforms/512x/mpc512x_shared.c | =A0 24 ++++++++++++++++=
++++++++
> =A0drivers/i2c/busses/Kconfig =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 | =A0 =
=A09 +++++----
> =A04 files changed, 32 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/pla=
tforms/512x/mpc5121_ads.c
> index 441abc4..a8976b4 100644
> --- a/arch/powerpc/platforms/512x/mpc5121_ads.c
> +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
> @@ -42,6 +42,8 @@ static void __init mpc5121_ads_setup_arch(void)
> =A0 =A0 =A0 =A0for_each_compatible_node(np, "pci", "fsl,mpc5121-pci")
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0mpc83xx_add_bridge(np);
> =A0#endif
> +
> + =A0 =A0 =A0 mpc512x_init_i2c();
> =A0}
>
> =A0static void __init mpc5121_ads_init_IRQ(void)
> diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platfor=
ms/512x/mpc512x.h
> index 9c03693..f4db8a7 100644
> --- a/arch/powerpc/platforms/512x/mpc512x.h
> +++ b/arch/powerpc/platforms/512x/mpc512x.h
> @@ -13,5 +13,6 @@
> =A0#define __MPC512X_H__
> =A0extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
> =A0extern void __init mpc512x_init_IRQ(void);
> +extern void __init mpc512x_init_i2c(void);
> =A0void __init mpc512x_declare_of_platform_devices(void);
> =A0#endif =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* __MPC512X_H_=
_ */
> diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/=
platforms/512x/mpc512x_shared.c
> index 7135d89..b776e45 100644
> --- a/arch/powerpc/platforms/512x/mpc512x_shared.c
> +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
> @@ -65,6 +65,30 @@ void __init mpc512x_init_IRQ(void)
> =A0 =A0 =A0 =A0ipic_set_default_priority();
> =A0}
>
> +void __init mpc512x_init_i2c(void)
> +{
> + =A0 =A0 =A0 struct device_node *np;
> + =A0 =A0 =A0 void __iomem *i2cctl;
> +
> + =A0 =A0 =A0 /* Enable I2C interrupts */
> + =A0 =A0 =A0 np =3D of_find_compatible_node(NULL, NULL, "fsl,mpc5121-i2c=
-ctrl");
> + =A0 =A0 =A0 if (np) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 i2cctl =3D of_iomap(np, 0);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (i2cctl) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 /*
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0* Set interrupt enable b=
its:
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0* =A0- I2C-0: bit 24,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0* =A0- I2C-1: bit 26,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0* =A0- I2C-2: bit 28.
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0*/
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 out_be32(i2cctl, 0x15000000=
);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 iounmap(i2cctl);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 }
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 of_node_put(np);
> + =A0 =A0 =A0 }
> +}
> +
> =A0/*
> =A0* Nodes to do bus probe on, soc and localbus
> =A0*/
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index a48c8ae..57ed637 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -391,13 +391,14 @@ config I2C_IXP2000
> =A0 =A0 =A0 =A0 =A0instead.
>
> =A0config I2C_MPC
> - =A0 =A0 =A0 tristate "MPC107/824x/85xx/52xx/86xx"
> + =A0 =A0 =A0 tristate "MPC107/824x/85xx/512x/52xx/86xx"
> =A0 =A0 =A0 =A0depends on PPC32
> =A0 =A0 =A0 =A0help
> =A0 =A0 =A0 =A0 =A0If you say yes to this option, support will be include=
d for the
> - =A0 =A0 =A0 =A0 built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC=
8245 and
> - =A0 =A0 =A0 =A0 MPC85xx/MPC8641 family processors. The driver may also =
work on 52xx
> - =A0 =A0 =A0 =A0 family processors, though interrupts are known not to w=
ork.
> + =A0 =A0 =A0 =A0 built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC=
8245,
> + =A0 =A0 =A0 =A0 MPC85xx/MPC8641 and MPC512x family processors. The driv=
er may
> + =A0 =A0 =A0 =A0 also work on 52xx family processors, though interrupts =
are known
> + =A0 =A0 =A0 =A0 not to work.
>
> =A0 =A0 =A0 =A0 =A0This driver can also be built as a module. =A0If so, t=
he module
> =A0 =A0 =A0 =A0 =A0will be called i2c-mpc.
> --
> 1.6.0.6
>
>
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH 09/12] mpc5121ads: Added I2C RTC node to mpc5121ads DTS.
From: Grant Likely @ 2009-05-06 21:02 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, Piotr Ziecik
In-Reply-To: <1241640919-4650-10-git-send-email-wd@denx.de>
On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <wd@denx.de> wrote:
> From: Piotr Ziecik <kosmo@semihalf.com>
>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
> ---
> =A0arch/powerpc/boot/dts/mpc5121ads.dts | =A0 =A05 +++++
> =A01 files changed, 5 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts=
/mpc5121ads.dts
> index 93fe12a..c2d9de9 100644
> --- a/arch/powerpc/boot/dts/mpc5121ads.dts
> +++ b/arch/powerpc/boot/dts/mpc5121ads.dts
> @@ -210,6 +210,11 @@
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupts =3D <9 0x8>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupt-parent =3D < &ip=
ic >;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0fsl5200-clocking;
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 rtc@68 {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 compatible =
=3D "stm,m41t80";
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0x=
68>;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 };
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0};
>
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0i2c@1720 {
> --
> 1.6.0.6
>
>
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH 10/12] mpc5121: Add MPC5121 Real time clock driver.
From: Grant Likely @ 2009-05-06 21:03 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: rtc-linux, linuxppc-dev, Piotr Ziecik, John Rigby
In-Reply-To: <1241640919-4650-11-git-send-email-wd@denx.de>
On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <wd@denx.de> wrote:
> From: John Rigby <jrigby@freescale.com>
>
> Based on Domen Puncer's rtc driver for 5200 posted to
> the ppclinux mailing list:
> =A0 =A0 =A0 =A0http://patchwork.ozlabs.org/linuxppc-embedded/patch?id=3D1=
1675
> but never commited anywhere.
>
> Changes to Domen's original:
>
> =A0 =A0Changed filenames/routine names from mpc5200* to mpc5121*
> =A0 =A0Changed match to only care about compatible and use "fsl,"
> =A0 =A0convention for compatible.
>
> =A0 =A0Make alarms more sane by dealing with lack of second alarm resolut=
ion.
>
> =A0 =A0Deal with the fact that most of the 5121 rtc registers are not per=
sistent
> =A0 =A0across a reset even with a battery attached:
>
> =A0 =A0 =A0 =A0Use actual_time register for time keeping
> =A0 =A0 =A0 =A0and target_time register as an offset to linux time
>
> =A0 =A0 =A0 =A0The target_time register would normally be used for hibern=
ation
> =A0 =A0 =A0 =A0but hibernation does not work on current silicon
>
> Signed-off-by: John Rigby <jrigby@freescale.com>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: <rtc-linux@googlegroups.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
On a *very* cursory review, I don't see anything here I object to.
And it does not look dangerous.
Acked-by: Grant Likely <grant.likely@secretlab.ca>
> ---
> =A0drivers/rtc/Kconfig =A0 =A0 =A0 | =A0 10 +
> =A0drivers/rtc/Makefile =A0 =A0 =A0| =A0 =A01 +
> =A0drivers/rtc/rtc-mpc5121.c | =A0408 +++++++++++++++++++++++++++++++++++=
++++++++++
> =A03 files changed, 419 insertions(+), 0 deletions(-)
> =A0create mode 100644 drivers/rtc/rtc-mpc5121.c
>
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index 4e9851f..900d5b8 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -750,4 +750,14 @@ config RTC_DRV_PS3
> =A0 =A0 =A0 =A0 =A0This driver can also be built as a module. If so, the =
module
> =A0 =A0 =A0 =A0 =A0will be called rtc-ps3.
>
> +config RTC_DRV_MPC5121
> + =A0 =A0 =A0 tristate "Freescale MPC5121 built-in RTC"
> + =A0 =A0 =A0 depends on RTC_CLASS
> + =A0 =A0 =A0 help
> + =A0 =A0 =A0 =A0 If you say yes here you will get support for the
> + =A0 =A0 =A0 =A0 built-in RTC MPC5121.
> +
> + =A0 =A0 =A0 =A0 This driver can also be built as a module. If so, the m=
odule
> + =A0 =A0 =A0 =A0 will be called rtc-mpc5121.
> +
> =A0endif # RTC_CLASS
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index 6c0639a..8c6d6a7 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -51,6 +51,7 @@ obj-$(CONFIG_RTC_DRV_STARFIRE) =A0 =A0 =A0 =A0+=3D rtc-=
starfire.o
> =A0obj-$(CONFIG_RTC_DRV_MAX6900) =A0+=3D rtc-max6900.o
> =A0obj-$(CONFIG_RTC_DRV_MAX6902) =A0+=3D rtc-max6902.o
> =A0obj-$(CONFIG_RTC_DRV_MV) =A0 =A0 =A0 +=3D rtc-mv.o
> +obj-$(CONFIG_RTC_DRV_MPC5121) =A0+=3D rtc-mpc5121.o
> =A0obj-$(CONFIG_RTC_DRV_OMAP) =A0 =A0 +=3D rtc-omap.o
> =A0obj-$(CONFIG_RTC_DRV_PCF8563) =A0+=3D rtc-pcf8563.o
> =A0obj-$(CONFIG_RTC_DRV_PCF8583) =A0+=3D rtc-pcf8583.o
> diff --git a/drivers/rtc/rtc-mpc5121.c b/drivers/rtc/rtc-mpc5121.c
> new file mode 100644
> index 0000000..63460cb
> --- /dev/null
> +++ b/drivers/rtc/rtc-mpc5121.c
> @@ -0,0 +1,408 @@
> +/*
> + * Real-time clock driver for MPC5121
> + *
> + * Copyright 2007, Domen Puncer <domen.puncer@telargo.com>
> + * Copyright 2008, Freescale Semiconductor, Inc. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/*
> + * History:
> + *
> + * Based on mpc5200_rtc.c written by Domen Puncer <domen.puncer@telargo.=
com>
> + * =A0 posted to linuxppc-embedded mailing list:
> + * =A0 =A0 http://patchwork.ozlabs.org/linuxppc-embedded/patch?id=3D1167=
5
> + * =A0 but never committed to any public tree.
> + *
> + * Author: John Rigby <jrigby@freescale.com>
> + * =A0 Converted to 5121 rtc driver.
> + *
> + * =A0 Make alarms more sane by dealing with lack of second alarm resolu=
tion.
> + *
> + * =A0 Use actual_time time register for time keeping since it is persis=
tent
> + * =A0 and the normal rtc registers are not. =A0Use target_time register=
as an
> + * =A0 offset to linux time.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/rtc.h>
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/io.h>
> +
> +struct mpc5121_rtc_regs {
> + =A0 =A0 =A0 u8 set_time; =A0 =A0 =A0 =A0 =A0 =A0/* RTC + 0x00 */
> + =A0 =A0 =A0 u8 hour_set; =A0 =A0 =A0 =A0 =A0 =A0/* RTC + 0x01 */
> + =A0 =A0 =A0 u8 minute_set; =A0 =A0 =A0 =A0 =A0/* RTC + 0x02 */
> + =A0 =A0 =A0 u8 second_set; =A0 =A0 =A0 =A0 =A0/* RTC + 0x03 */
> +
> + =A0 =A0 =A0 u8 set_date; =A0 =A0 =A0 =A0 =A0 =A0/* RTC + 0x04 */
> + =A0 =A0 =A0 u8 month_set; =A0 =A0 =A0 =A0 =A0 /* RTC + 0x05 */
> + =A0 =A0 =A0 u8 weekday_set; =A0 =A0 =A0 =A0 /* RTC + 0x06 */
> + =A0 =A0 =A0 u8 date_set; =A0 =A0 =A0 =A0 =A0 =A0/* RTC + 0x07 */
> +
> + =A0 =A0 =A0 u8 write_sw; =A0 =A0 =A0 =A0 =A0 =A0/* RTC + 0x08 */
> + =A0 =A0 =A0 u8 sw_set; =A0 =A0 =A0 =A0 =A0 =A0 =A0/* RTC + 0x09 */
> + =A0 =A0 =A0 u16 year_set; =A0 =A0 =A0 =A0 =A0 /* RTC + 0x0a */
> +
> + =A0 =A0 =A0 u8 alm_enable; =A0 =A0 =A0 =A0 =A0/* RTC + 0x0c */
> + =A0 =A0 =A0 u8 alm_hour_set; =A0 =A0 =A0 =A0/* RTC + 0x0d */
> + =A0 =A0 =A0 u8 alm_min_set; =A0 =A0 =A0 =A0 /* RTC + 0x0e */
> + =A0 =A0 =A0 u8 int_enable; =A0 =A0 =A0 =A0 =A0/* RTC + 0x0f */
> +
> + =A0 =A0 =A0 u8 reserved1;
> + =A0 =A0 =A0 u8 hour; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0/* RTC + 0x11 */
> + =A0 =A0 =A0 u8 minute; =A0 =A0 =A0 =A0 =A0 =A0 =A0/* RTC + 0x12 */
> + =A0 =A0 =A0 u8 second; =A0 =A0 =A0 =A0 =A0 =A0 =A0/* RTC + 0x13 */
> +
> + =A0 =A0 =A0 u8 month; =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* RTC + 0x14 */
> + =A0 =A0 =A0 u8 wday_mday; =A0 =A0 =A0 =A0 =A0 /* RTC + 0x15 */
> + =A0 =A0 =A0 u16 year; =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* RTC + 0x16 */
> +
> + =A0 =A0 =A0 u8 int_alm; =A0 =A0 =A0 =A0 =A0 =A0 /* RTC + 0x18 */
> + =A0 =A0 =A0 u8 int_sw; =A0 =A0 =A0 =A0 =A0 =A0 =A0/* RTC + 0x19 */
> + =A0 =A0 =A0 u8 alm_status; =A0 =A0 =A0 =A0 =A0/* RTC + 0x1a */
> + =A0 =A0 =A0 u8 sw_minute; =A0 =A0 =A0 =A0 =A0 /* RTC + 0x1b */
> +
> + =A0 =A0 =A0 u8 bus_error_1; =A0 =A0 =A0 =A0 /* RTC + 0x1c */
> + =A0 =A0 =A0 u8 int_day; =A0 =A0 =A0 =A0 =A0 =A0 /* RTC + 0x1d */
> + =A0 =A0 =A0 u8 int_min; =A0 =A0 =A0 =A0 =A0 =A0 /* RTC + 0x1e */
> + =A0 =A0 =A0 u8 int_sec; =A0 =A0 =A0 =A0 =A0 =A0 /* RTC + 0x1f */
> +
> + =A0 =A0 =A0 /*
> + =A0 =A0 =A0 =A0* target_time:
> + =A0 =A0 =A0 =A0* =A0 =A0 =A0intended to be used for hibernation but hib=
ernation
> + =A0 =A0 =A0 =A0* =A0 =A0 =A0does not work on silicon rev 1.5 so use it =
for non-volatile
> + =A0 =A0 =A0 =A0* =A0 =A0 =A0storage of offset between the actual_time r=
egister and linux
> + =A0 =A0 =A0 =A0* =A0 =A0 =A0time
> + =A0 =A0 =A0 =A0*/
> + =A0 =A0 =A0 u32 target_time; =A0 =A0 =A0 =A0/* RTC + 0x20 */
> + =A0 =A0 =A0 /*
> + =A0 =A0 =A0 =A0* actual_time:
> + =A0 =A0 =A0 =A0* =A0 =A0 =A0readonly time since VBAT_RTC was last conne=
cted
> + =A0 =A0 =A0 =A0*/
> + =A0 =A0 =A0 u32 actual_time; =A0 =A0 =A0 =A0/* RTC + 0x24 */
> + =A0 =A0 =A0 u32 keep_alive; =A0 =A0 =A0 =A0 /* RTC + 0x28 */
> +};
> +
> +struct mpc5121_rtc_data {
> + =A0 =A0 =A0 unsigned irq;
> + =A0 =A0 =A0 unsigned irq_periodic;
> + =A0 =A0 =A0 struct mpc5121_rtc_regs __iomem *regs;
> + =A0 =A0 =A0 struct rtc_device *rtc;
> + =A0 =A0 =A0 struct rtc_wkalrm wkalarm;
> +};
> +
> +/*
> + * Update second/minute/hour registers.
> + *
> + * This is just so alarm will work.
> + */
> +static void mpc5121_rtc_update_smh(struct mpc5121_rtc_regs __iomem *regs=
,
> + =A0 =A0 =A0 struct rtc_time *tm)
> +{
> + =A0 =A0 =A0 out_8(®s->second_set, tm->tm_sec);
> + =A0 =A0 =A0 out_8(®s->minute_set, tm->tm_min);
> + =A0 =A0 =A0 out_8(®s->hour_set, tm->tm_hour);
> +
> + =A0 =A0 =A0 /* set time sequence */
> + =A0 =A0 =A0 out_8(®s->set_time, 0x1);
> + =A0 =A0 =A0 out_8(®s->set_time, 0x3);
> + =A0 =A0 =A0 out_8(®s->set_time, 0x1);
> + =A0 =A0 =A0 out_8(®s->set_time, 0x0);
> +}
> +
> +static int mpc5121_rtc_read_time(struct device *dev, struct rtc_time *tm=
)
> +{
> + =A0 =A0 =A0 struct mpc5121_rtc_data *rtc =3D dev_get_drvdata(dev);
> + =A0 =A0 =A0 struct mpc5121_rtc_regs __iomem *regs =3D rtc->regs;
> + =A0 =A0 =A0 unsigned long now;
> +
> + =A0 =A0 =A0 /*
> + =A0 =A0 =A0 =A0* linux time is actual_time plus the offset saved in tar=
get_time
> + =A0 =A0 =A0 =A0*/
> + =A0 =A0 =A0 now =3D in_be32(®s->actual_time) + in_be32(®s->target=
_time);
> +
> + =A0 =A0 =A0 rtc_time_to_tm(now, tm);
> +
> + =A0 =A0 =A0 /*
> + =A0 =A0 =A0 =A0* update second minute hour registers
> + =A0 =A0 =A0 =A0* so alarms will work
> + =A0 =A0 =A0 =A0*/
> + =A0 =A0 =A0 mpc5121_rtc_update_smh(regs, tm);
> +
> + =A0 =A0 =A0 return 0;
> +}
> +
> +static int mpc5121_rtc_set_time(struct device *dev, struct rtc_time *tm)
> +{
> + =A0 =A0 =A0 struct mpc5121_rtc_data *rtc =3D dev_get_drvdata(dev);
> + =A0 =A0 =A0 struct mpc5121_rtc_regs __iomem *regs =3D rtc->regs;
> + =A0 =A0 =A0 int ret;
> + =A0 =A0 =A0 unsigned long now;
> +
> +
> + =A0 =A0 =A0 /*
> + =A0 =A0 =A0 =A0* The actual_time register is read only so we write the =
offset
> + =A0 =A0 =A0 =A0* between it and linux time to the target_time register.
> + =A0 =A0 =A0 =A0*/
> + =A0 =A0 =A0 ret =3D rtc_tm_to_time(tm, &now);
> + =A0 =A0 =A0 if (ret =3D=3D 0)
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 out_be32(®s->target_time, now - in_be32(=
®s->actual_time));
> +
> + =A0 =A0 =A0 /*
> + =A0 =A0 =A0 =A0* update second minute hour registers
> + =A0 =A0 =A0 =A0* so alarms will work
> + =A0 =A0 =A0 =A0*/
> + =A0 =A0 =A0 mpc5121_rtc_update_smh(regs, tm);
> +
> + =A0 =A0 =A0 return 0;
> +}
> +
> +static int mpc5121_rtc_read_alarm(struct device *dev, struct rtc_wkalrm =
*alarm)
> +{
> + =A0 =A0 =A0 struct mpc5121_rtc_data *rtc =3D dev_get_drvdata(dev);
> + =A0 =A0 =A0 struct mpc5121_rtc_regs __iomem *regs =3D rtc->regs;
> +
> + =A0 =A0 =A0 *alarm =3D rtc->wkalarm;
> +
> + =A0 =A0 =A0 alarm->pending =3D in_8(®s->alm_status);
> +
> + =A0 =A0 =A0 return 0;
> +}
> +
> +static int mpc5121_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *=
alarm)
> +{
> + =A0 =A0 =A0 struct mpc5121_rtc_data *rtc =3D dev_get_drvdata(dev);
> + =A0 =A0 =A0 struct mpc5121_rtc_regs __iomem *regs =3D rtc->regs;
> +
> + =A0 =A0 =A0 /*
> + =A0 =A0 =A0 =A0* the alarm has no seconds so deal with it
> + =A0 =A0 =A0 =A0*/
> + =A0 =A0 =A0 if (alarm->time.tm_sec) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 alarm->time.tm_sec =3D 0;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 alarm->time.tm_min++;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (alarm->time.tm_min >=3D 60) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 alarm->time.tm_min =3D 0;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 alarm->time.tm_hour++;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (alarm->time.tm_hour >=
=3D 24)
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 alarm->time=
.tm_hour =3D 0;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 }
> + =A0 =A0 =A0 }
> +
> + =A0 =A0 =A0 alarm->time.tm_mday =3D -1;
> + =A0 =A0 =A0 alarm->time.tm_mon =3D -1;
> + =A0 =A0 =A0 alarm->time.tm_year =3D -1;
> +
> + =A0 =A0 =A0 out_8(®s->alm_min_set, alarm->time.tm_min);
> + =A0 =A0 =A0 out_8(®s->alm_hour_set, alarm->time.tm_hour);
> +
> + =A0 =A0 =A0 out_8(®s->alm_enable, alarm->enabled);
> +
> + =A0 =A0 =A0 rtc->wkalarm =3D *alarm;
> + =A0 =A0 =A0 return 0;
> +}
> +
> +static irqreturn_t mpc5121_rtc_handler(int irq, void *dev)
> +{
> + =A0 =A0 =A0 struct mpc5121_rtc_data *rtc =3D dev_get_drvdata((struct de=
vice *)dev);
> + =A0 =A0 =A0 struct mpc5121_rtc_regs __iomem *regs =3D rtc->regs;
> +
> + =A0 =A0 =A0 if (in_8(®s->int_alm)) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* acknowledge and clear status */
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 out_8(®s->int_alm, 1);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 out_8(®s->alm_status, 1);
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_=
AF);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return IRQ_HANDLED;
> + =A0 =A0 =A0 }
> +
> + =A0 =A0 =A0 return IRQ_NONE;
> +}
> +
> +static irqreturn_t mpc5121_rtc_handler_upd(int irq, void *dev)
> +{
> + =A0 =A0 =A0 struct mpc5121_rtc_data *rtc =3D dev_get_drvdata((struct de=
vice *)dev);
> + =A0 =A0 =A0 struct mpc5121_rtc_regs __iomem *regs =3D rtc->regs;
> +
> + =A0 =A0 =A0 if (in_8(®s->int_sec) && (in_8(®s->int_enable) & 0x1)=
) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* acknowledge */
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 out_8(®s->int_sec, 1);
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_=
UF);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return IRQ_HANDLED;
> + =A0 =A0 =A0 }
> +
> + =A0 =A0 =A0 return IRQ_NONE;
> +}
> +
> +static int mpc5121_rtc_ioctl(struct device *dev, unsigned int cmd,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 unsigned long arg)
> +{
> + =A0 =A0 =A0 struct mpc5121_rtc_data *rtc =3D dev_get_drvdata(dev);
> + =A0 =A0 =A0 struct mpc5121_rtc_regs __iomem *regs =3D rtc->regs;
> +
> + =A0 =A0 =A0 switch (cmd) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* alarm interrupt */
> + =A0 =A0 =A0 case RTC_AIE_ON:
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 out_8(®s->alm_enable, 1);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 rtc->wkalarm.enabled =3D 1;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 break;
> + =A0 =A0 =A0 case RTC_AIE_OFF:
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 out_8(®s->alm_enable, 0);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 rtc->wkalarm.enabled =3D 0;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 break;
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* update interrupt */
> + =A0 =A0 =A0 case RTC_UIE_ON:
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 out_8(®s->int_enable,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 (in_8(®s=
->int_enable) & ~0x8) | 0x1);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 break;
> + =A0 =A0 =A0 case RTC_UIE_OFF:
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 out_8(®s->int_enable, in_8(®s->int_en=
able) & ~0x1);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 break;
> +
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* no periodic interrupts */
> + =A0 =A0 =A0 case RTC_IRQP_READ:
> + =A0 =A0 =A0 case RTC_IRQP_SET:
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return -ENOTTY;
> +
> + =A0 =A0 =A0 default:
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 return -ENOIOCTLCMD;
> + =A0 =A0 =A0 }
> + =A0 =A0 =A0 return 0;
> +}
> +
> +static const struct rtc_class_ops mpc5121_rtc_ops =3D {
> + =A0 =A0 =A0 .read_time =3D mpc5121_rtc_read_time,
> + =A0 =A0 =A0 .set_time =3D mpc5121_rtc_set_time,
> + =A0 =A0 =A0 .read_alarm =3D mpc5121_rtc_read_alarm,
> + =A0 =A0 =A0 .set_alarm =3D mpc5121_rtc_set_alarm,
> + =A0 =A0 =A0 .ioctl =3D mpc5121_rtc_ioctl,
> +};
> +
> +static int __devinit mpc5121_rtc_probe(struct of_device *op,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 const struct of_device_id *match)
> +{
> + =A0 =A0 =A0 struct mpc5121_rtc_data *rtc;
> + =A0 =A0 =A0 int err =3D 0;
> + =A0 =A0 =A0 u32 ka;
> +
> + =A0 =A0 =A0 rtc =3D kzalloc(sizeof(*rtc), GFP_KERNEL);
> + =A0 =A0 =A0 if (!rtc) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 err =3D -ENOMEM;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 goto out;
> + =A0 =A0 =A0 }
> +
> + =A0 =A0 =A0 rtc->regs =3D of_iomap(op->node, 0);
> +
> + =A0 =A0 =A0 if (!rtc->regs) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 printk(KERN_ERR "%s: couldn't map io space\=
n", __func__);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 err =3D -ENOSYS;
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 goto out_free;
> + =A0 =A0 =A0 }
> +
> + =A0 =A0 =A0 device_init_wakeup(&op->dev, 1);
> +
> + =A0 =A0 =A0 rtc->rtc =3D rtc_device_register("mpc5121-rtc", &op->dev,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 =A0 =A0 =A0 =A0 &mpc5121_rtc_ops, THIS_MODULE);
> + =A0 =A0 =A0 if (IS_ERR(rtc->rtc)) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 err =3D PTR_ERR(rtc->rtc);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 goto out_unmap;
> + =A0 =A0 =A0 }
> +
> + =A0 =A0 =A0 dev_set_drvdata(&op->dev, rtc);
> +
> + =A0 =A0 =A0 rtc->irq =3D irq_of_parse_and_map(op->node, 1);
> + =A0 =A0 =A0 err =3D request_irq(rtc->irq, mpc5121_rtc_handler, IRQF_DIS=
ABLED,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 =A0 =A0 =A0 =A0 "mpc5121-rtc", &op->dev);
> + =A0 =A0 =A0 if (err) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 printk(KERN_ERR "%s: could not request irq:=
%i\n",
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 __func__, rtc->irq);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 goto out_dispose;
> + =A0 =A0 =A0 }
> +
> + =A0 =A0 =A0 rtc->irq_periodic =3D irq_of_parse_and_map(op->node, 0);
> + =A0 =A0 =A0 err =3D request_irq(rtc->irq_periodic, mpc5121_rtc_handler_=
upd,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0IRQF_DIS=
ABLED, "mpc5121-rtc_upd", &op->dev);
> + =A0 =A0 =A0 if (err) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 printk(KERN_ERR "%s: could not request irq:=
%i\n",
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=
=A0 =A0 =A0 =A0 =A0 __func__, rtc->irq_periodic);
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 goto out_dispose2;
> + =A0 =A0 =A0 }
> +
> + =A0 =A0 =A0 ka =3D in_be32(&rtc->regs->keep_alive);
> + =A0 =A0 =A0 if (ka & 0x02) {
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 printk(KERN_WARNING
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 "mpc5121-rtc: Battery or os=
cillator failure!\n");
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 out_be32(&rtc->regs->keep_alive, ka);
> + =A0 =A0 =A0 }
> +
> + =A0 =A0 =A0 goto out;
> +
> +out_dispose2:
> + =A0 =A0 =A0 irq_dispose_mapping(rtc->irq_periodic);
> + =A0 =A0 =A0 free_irq(rtc->irq, &op->dev);
> +out_dispose:
> + =A0 =A0 =A0 irq_dispose_mapping(rtc->irq);
> +out_unmap:
> + =A0 =A0 =A0 iounmap(rtc->regs);
> +out_free:
> + =A0 =A0 =A0 kfree(rtc);
> +out:
> + =A0 =A0 =A0 return err;
> +}
> +
> +static int __devexit mpc5121_rtc_remove(struct of_device *op)
> +{
> + =A0 =A0 =A0 struct mpc5121_rtc_data *rtc =3D dev_get_drvdata(&op->dev);
> + =A0 =A0 =A0 struct mpc5121_rtc_regs __iomem *regs =3D rtc->regs;
> +
> + =A0 =A0 =A0 /* disable interrupt, so there are no nasty surprises */
> + =A0 =A0 =A0 out_8(®s->alm_enable, 0);
> + =A0 =A0 =A0 out_8(®s->int_enable, in_8(®s->int_enable) & ~0x1);
> +
> + =A0 =A0 =A0 rtc_device_unregister(rtc->rtc);
> + =A0 =A0 =A0 iounmap(rtc->regs);
> + =A0 =A0 =A0 free_irq(rtc->irq, &op->dev);
> + =A0 =A0 =A0 free_irq(rtc->irq_periodic, &op->dev);
> + =A0 =A0 =A0 irq_dispose_mapping(rtc->irq);
> + =A0 =A0 =A0 irq_dispose_mapping(rtc->irq_periodic);
> + =A0 =A0 =A0 dev_set_drvdata(&op->dev, NULL);
> + =A0 =A0 =A0 kfree(rtc);
> +
> + =A0 =A0 =A0 return 0;
> +}
> +
> +static struct of_device_id mpc5121_rtc_match[] =3D {
> + =A0 =A0 =A0 { .compatible =3D "fsl,mpc5121-rtc", },
> + =A0 =A0 =A0 {},
> +};
> +
> +static struct of_platform_driver mpc5121_rtc_driver =3D {
> + =A0 =A0 =A0 .owner =3D THIS_MODULE,
> + =A0 =A0 =A0 .name =3D "mpc5121-rtc",
> + =A0 =A0 =A0 .match_table =3D mpc5121_rtc_match,
> + =A0 =A0 =A0 .probe =3D mpc5121_rtc_probe,
> + =A0 =A0 =A0 .remove =3D mpc5121_rtc_remove,
> +};
> +
> +static int __init mpc5121_rtc_init(void)
> +{
> + =A0 =A0 =A0 return of_register_platform_driver(&mpc5121_rtc_driver);
> +}
> +
> +static void __exit mpc5121_rtc_exit(void)
> +{
> + =A0 =A0 =A0 of_unregister_platform_driver(&mpc5121_rtc_driver);
> +}
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("John Rigby <jrigby@freescale.com>");
> +
> +module_init(mpc5121_rtc_init);
> +module_exit(mpc5121_rtc_exit);
> --
> 1.6.0.6
>
>
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: [PATCH 10/12] mpc5121: Add MPC5121 Real time clock driver.
From: Wolfram Sang @ 2009-05-06 21:06 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, Piotr Ziecik, rtc-linux, John Rigby
In-Reply-To: <1241640919-4650-11-git-send-email-wd@denx.de>
[-- Attachment #1: Type: text/plain, Size: 675 bytes --]
On Wed, May 06, 2009 at 10:15:17PM +0200, Wolfgang Denk wrote:
> From: John Rigby <jrigby@freescale.com>
>
> Based on Domen Puncer's rtc driver for 5200 posted to
> the ppclinux mailing list:
> http://patchwork.ozlabs.org/linuxppc-embedded/patch?id=11675
> but never commited anywhere.
>
> Changes to Domen's original:
>
> Changed filenames/routine names from mpc5200* to mpc5121*
Why not changing it to mpc5xxx? From a glimpse, it should still work on
MPC5200, too.
Regards,
Wolfram
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* Re: [PATCH 11/12] mpc5121: Added MPC512x DMA driver.
From: Grant Likely @ 2009-05-06 21:07 UTC (permalink / raw)
To: Wolfgang Denk; +Cc: linuxppc-dev, Piotr Ziecik
In-Reply-To: <1241640919-4650-12-git-send-email-wd@denx.de>
On Wed, May 6, 2009 at 2:15 PM, Wolfgang Denk <wd@denx.de> wrote:
> From: Piotr Ziecik <kosmo@semihalf.com>
>
> This patch adds initial version of MPC512x DMA driver.
> Only memory to memory transfers are currenly supported.
>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
Don't have time to review this in detail right now, but three quick comment=
s:
> =A0drivers/dma/mpc512x_dma.c =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| =A0=
642 ++++++++++++++++++++++++++
> =A0drivers/dma/mpc512x_dma.h =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0| =A0=
192 ++++++++
It looks to me like these two files should be merged.
> diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts=
/mpc5121ads.dts
> index c2d9de9..e7f0e09 100644
> --- a/arch/powerpc/boot/dts/mpc5121ads.dts
> +++ b/arch/powerpc/boot/dts/mpc5121ads.dts
> @@ -373,7 +373,7 @@
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0};
>
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0dma@14000 {
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 compatible =3D "fsl,mpc5121=
-dma2";
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 compatible =3D "fsl,mpc512x=
-dma";
Nack. Compatible values should not use wildcards. Be specific. And
be specific about what it is compatible to if another part implements
the same device.
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0reg =3D <0x14000 0x1800>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupts =3D <65 0x8>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupt-parent =3D < &ip=
ic >;
> diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/=
platforms/512x/mpc512x_shared.c
> index b776e45..135fd6b 100644
> --- a/arch/powerpc/platforms/512x/mpc512x_shared.c
> +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
> @@ -95,6 +95,7 @@ void __init mpc512x_init_i2c(void)
> =A0static struct of_device_id __initdata of_bus_ids[] =3D {
> =A0 =A0 =A0 =A0{ .compatible =3D "fsl,mpc5121-immr", },
> =A0 =A0 =A0 =A0{ .compatible =3D "fsl,mpc5121-localbus", },
> + =A0 =A0 =A0 { .compatible =3D "fsl,mpc5121-dma", },
This doesn't look right either. Shouldn't the dma device hang off the
IMMR node?
g.
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox