* Re: RAMDISK on EP88xc
From: Scott Wood @ 2009-07-06 19:01 UTC (permalink / raw)
To: Mikhail Zaturenskiy; +Cc: linuxppc-dev
In-Reply-To: <97dd5fd20907061150o303418a3m3967650433fbb061@mail.gmail.com>
Mikhail Zaturenskiy wrote:
> ****************************************************
> in arch/powerpc/configs/ep88xc_defconfig:
> + CONFIG_BLK_DEV = y
Hmm, missed this. I'm not sure why the subsequent changes didn't take
effect -- what did the .config look like after sucking in the defconfig
changes, but without any Kconfig changes?
In any case, the best way to make changes is with one of the config
editors (menuconfig, etc).
-Scott
^ permalink raw reply
* Re: RAMDISK on EP88xc
From: Mikhail Zaturenskiy @ 2009-07-06 19:28 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
In-Reply-To: <4A524A24.2010206@freescale.com>
[-- Attachment #1: Type: text/plain, Size: 746 bytes --]
> In any case, the best way to make changes is with one of the config editors
> (menuconfig, etc).
I figured, but thought that editing the ep88xc_defconfig should also
be effective...
> Mikhail Zaturenskiy wrote:
>>
>> ****************************************************
>> in arch/powerpc/configs/ep88xc_defconfig:
>> + CONFIG_BLK_DEV = y
>
> Hmm, missed this. I'm not sure why the subsequent changes didn't take
> effect -- what did the .config look like after sucking in the defconfig
> changes, but without any Kconfig changes?
I reverted back all the Kconfig changes and made the changes just in
ep88xc_defconfig. See attached files for details, (didn't want a
mile-long email).
Does this tell you anything?
[-- Attachment #2: ep88xc_defconfig.txt --]
[-- Type: text/plain, Size: 22000 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc2
# Mon Jan 26 15:35:28 2009
#
# CONFIG_PPC64 is not set
CONFIG_BLK_DEV = y
CONFIG_BLK_DEV_INITRD = y
CONFIG_BLK_DEV_LOOP = y
CONFIG_BLK_DEV_RAM = y
CONFIG_BLK_DEV_RAM_COUNT = 16
CONFIG_BLK_DEV_RAM_SIZE = 32768
CONFIG_EXT2_FS = y
#
# Processor support
#
# CONFIG_6xx is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_CPM1=y
# CONFIG_MPC8XXFADS is not set
# CONFIG_MPC86XADS is not set
# CONFIG_MPC885ADS is not set
CONFIG_PPC_EP88XC=y
# CONFIG_PPC_ADDER875 is not set
# CONFIG_PPC_MGSUVD is not set
#
# MPC8xx CPM Options
#
#
# Generic MPC8xx Options
#
CONFIG_8xx_COPYBACK=y
# CONFIG_8xx_GPIO is not set
# CONFIG_8xx_CPU6 is not set
CONFIG_8xx_CPU15=y
CONFIG_NO_UCODE_PATCH=y
# CONFIG_USB_SOF_UCODE_PATCH is not set
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
# CONFIG_PQ2ADS is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_8XX_MINIMAL_FPEMU=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_CFI_FLAGADM is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_FS_ENET_MDIO_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
#
# Library routines
#
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
# CONFIG_VIRTUALIZATION is not set
[-- Attachment #3: resulting_config.txt --]
[-- Type: text/plain, Size: 22193 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29.6
# Mon Jul 6 14:13:03 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
# CONFIG_6xx is not set
# CONFIG_PPC_85xx is not set
CONFIG_PPC_8xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
CONFIG_PPC_MMU_NOHASH=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_FREEZER is not set
#
# Platform support
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_CPM1=y
# CONFIG_MPC8XXFADS is not set
# CONFIG_MPC86XADS is not set
# CONFIG_MPC885ADS is not set
CONFIG_PPC_EP88XC=y
# CONFIG_PPC_ADDER875 is not set
# CONFIG_PPC_MGSUVD is not set
#
# MPC8xx CPM Options
#
#
# Generic MPC8xx Options
#
CONFIG_8xx_COPYBACK=y
# CONFIG_8xx_GPIO is not set
# CONFIG_8xx_CPU6 is not set
CONFIG_8xx_CPU15=y
CONFIG_NO_UCODE_PATCH=y
# CONFIG_USB_SOF_UCODE_PATCH is not set
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
# CONFIG_PQ2ADS is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_QUICC_ENGINE is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_8XX_MINIMAL_FPEMU=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xfd000000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_CFI_FLAGADM is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_FS_ENET_MDIO_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
CONFIG_DAB=y
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
#
# Library routines
#
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
# CONFIG_VIRTUALIZATION is not set
^ permalink raw reply
* Re: RAMDISK on EP88xc
From: Scott Wood @ 2009-07-06 20:15 UTC (permalink / raw)
To: Mikhail Zaturenskiy; +Cc: linuxppc-dev
In-Reply-To: <97dd5fd20907061228v131149c8ue5c3a02f6084e171@mail.gmail.com>
Mikhail Zaturenskiy wrote:
>>> + CONFIG_BLK_DEV = y
>> Hmm, missed this. I'm not sure why the subsequent changes didn't take
>> effect -- what did the .config look like after sucking in the defconfig
>> changes, but without any Kconfig changes?
>
> I reverted back all the Kconfig changes and made the changes just in
> ep88xc_defconfig. See attached files for details, (didn't want a
> mile-long email).
>
> Does this tell you anything?
CONFIG_BLK_DEV is enabled in that output. That was the only change that
I saw you make to the config in the previous e-mail -- no
CONFIG_BLK_DEV_RAM, etc:
> ****************************************************
> in arch/powerpc/configs/ep88xc_defconfig:
> + CONFIG_BLK_DEV = y
> - CONFIG_BLK_DEV is not set
> - CONFIG_BLK_DEV_INITRD is not set
> - CONFIG_EXT2_FS is not set
-Scott
^ permalink raw reply
* Re: RAMDISK on EP88xc
From: Scott Wood @ 2009-07-06 20:18 UTC (permalink / raw)
To: Mikhail Zaturenskiy; +Cc: linuxppc-dev
In-Reply-To: <4A525B4C.5050600@freescale.com>
Scott Wood wrote:
> Mikhail Zaturenskiy wrote:
>>>> + CONFIG_BLK_DEV = y
>>> Hmm, missed this. I'm not sure why the subsequent changes didn't take
>>> effect -- what did the .config look like after sucking in the defconfig
>>> changes, but without any Kconfig changes?
>>
>> I reverted back all the Kconfig changes and made the changes just in
>> ep88xc_defconfig. See attached files for details, (didn't want a
>> mile-long email).
>>
>> Does this tell you anything?
>
> CONFIG_BLK_DEV is enabled in that output. That was the only change that
> I saw you make to the config in the previous e-mail -- no
> CONFIG_BLK_DEV_RAM, etc:
>
>> ****************************************************
>> in arch/powerpc/configs/ep88xc_defconfig:
>> + CONFIG_BLK_DEV = y
>> - CONFIG_BLK_DEV is not set
>> - CONFIG_BLK_DEV_INITRD is not set
>> - CONFIG_EXT2_FS is not set
OK, looked at the attached defconfig (didn't notice that until after I
hit send).
Try omitting the spaces around the equal sign. BLK_DEV likely worked
because it's default y and because you removed the "is not set" line,
not because you added the = y line.
-Scott
^ permalink raw reply
* Re: RAMDISK on EP88xc
From: Mikhail Zaturenskiy @ 2009-07-06 20:26 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
In-Reply-To: <4A525C12.3090804@freescale.com>
On Mon, Jul 6, 2009 at 3:18 PM, Scott Wood<scottwood@freescale.com> wrote:
> Try omitting the spaces around the equal sign.
AHA! Lesson learned :) =A0thanks Scott! That did it.
^ permalink raw reply
* Re: Delay on intialization ide subsystem(most likely)
From: Benjamin Herrenschmidt @ 2009-07-06 23:23 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz
Cc: linux-ide, Andrey Gusev, petkovbb, David Miller, linuxppc-dev
In-Reply-To: <200907061704.38539.bzolnier@gmail.com>
On Mon, 2009-07-06 at 17:04 +0200, Bartlomiej Zolnierkiewicz wrote:
> > Delay is fixed itself in 2.6.31-rc2. Most likely it was platform specific issue. But lost interrupt still exists.
> > There is log of 2.6.31-rc2:
>
> Thanks for letting us know. When it comes to the lost interrupt issue
> I still suspect that this is pmac specific problem (though Dave may have
> some fresh idea about it).
Hard to tell. Those things generally work... maybe something is wrong
with that disk vs. that timing. Does it work if you move it to the other
controller (the one to which the CD drive is connected ?)
Cheers,
Ben.
> > [ 1.595268] MacIO PCI driver attached to Keylargo chipset
> > [ 1.597024] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
> > [ 1.597988] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
> > [ 1.598024] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
> > [ 1.598365] irq: irq 20 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
> > [ 1.598401] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
> > [ 1.598762] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
> > [ 1.598797] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
> > [ 1.599264] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
> > [ 1.599300] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
> > [ 1.601336] Uniform Multi-Platform E-IDE driver
> > [ 1.602201] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
> > [ 2.630651] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
> > [ 2.630767] Probing IDE interface ide0...
> > [ 2.930834] hda: IBM-IC35L060AVVA07-0, ATA DISK drive
> > [ 3.290646] hdb: QUANTUM FIREBALLP LM20.5, ATA DISK drive
> > [ 3.291087] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> > [ 3.291264] hda: UDMA/100 mode selected
> > [ 3.291473] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> > [ 3.291720] hdb: UDMA/66 mode selected
> > [ 3.292118] ide0 at 0xf10c2000-0xf10c2070,0xf10c2160 on irq 39
> > [ 4.320649] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19
> > [ 4.320753] Probing IDE interface ide1...
> > [ 4.921004] ide1 at 0xf10ba000-0xf10ba070,0xf10ba160 on irq 19
> > [ 5.950647] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 20
> > [ 5.950743] Probing IDE interface ide2...
> > [ 6.370828] hde: PHILIPS CDD5101, ATAPI CD/DVD-ROM drive
> > [ 6.730948] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> > [ 6.731332] hde: MWDMA2 mode selected
> > [ 6.731832] ide2 at 0xf10be000-0xf10be070,0xf10be160 on irq 20
> > [ 6.732558] ide-gd driver 1.18
> > [ 6.732735] hda: max request size: 128KiB
> > [ 6.763392] hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63
> > [ 6.763741] hda: cache flushes supported
> > [ 6.764277] hda: [mac] hda1 hda2 hda3 hda4
> > [ 6.770469] hdb: max request size: 128KiB
> > [ 6.803427] hdb: Host Protected Area detected.
> > [ 6.803431] current capacity is 40130390 sectors (20546 MB)
> > [ 6.803435] native capacity is 40132503 sectors (20547 MB)
> > [ 6.803590] hdb: 40130390 sectors (20546 MB) w/1900KiB Cache, CHS=39811/16/63
> > [ 6.803684] hdb: cache flushes not supported
> > [ 6.803910] hdb:
> > [ 26.800743] ide-pmac lost interrupt, dma status: 8480
> > [ 26.800809] hdb: lost interrupt
> > [ 26.800850] hdb: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
> > [ 26.800976] hdb: possibly failed opcode: 0xc8
> > [ 26.803449] hda: DMA disabled
> > [ 26.805664] hdb: DMA disabled
> > [ 26.900633] ide0: reset: success
> > [ 26.949147] hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 >
> > [ 27.007890] ide-cd driver 5.00
> > [ 27.011728] ide-cd: hde: ATAPI 32X DVD-ROM CD-R/RW drive, 8192kB Cache
> > [ 27.014163] Uniform CD-ROM driver Revision: 3.20
> >
^ permalink raw reply
* Re: dma_ops->map_page == NULL
From: Mark Nelson @ 2009-07-07 0:15 UTC (permalink / raw)
To: Kári Davíðsson; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <4A523984.2080904@marel.com>
On Tuesday 07 July 2009 03:51:00 K=E1ri Dav=ED=F0sson wrote:
> I am doing a driver that uses dma_map_single().
>=20
> After changing to to linux 2.6.29.3 I am getting
> segfaults in dma_map_single() because dma_ops->map_page is NULL.
> Actually dma_ops looks funky too.
When the 32 and 64bit DMA code was merged in .28 , map_/unmap_page() was
added in favour of map_/unmap_single() (which was later removed in .29)
so you'll have to replace your calls to dma_map_single() with
dma_map_page(). Just pass it the page and offset rather than the address.
Hope that helps!
Mark.
>=20
> The driver is an of_platform_driver which is declared as an child of
> the lbp (fsl,lpb) node of the device tree.
>=20
> This is on powerpc 5200b platform.
>=20
> rg
> kd
^ permalink raw reply
* Re: [PATCH] powerpc/mpic: Fix MPIC_BROKEN_REGREAD on non broken MPICs
From: Michael Ellerman @ 2009-07-07 0:32 UTC (permalink / raw)
To: Olof Johansson; +Cc: linuxppc-dev
In-Reply-To: <20090706135926.GA16205@lixom.net>
[-- Attachment #1: Type: text/plain, Size: 969 bytes --]
On Mon, 2009-07-06 at 08:59 -0500, Olof Johansson wrote:
> On Mon, Jul 06, 2009 at 12:08:52PM +1000, Michael Ellerman wrote:
> > The workaround enabled by CONFIG_MPIC_BROKEN_REGREAD does not work
> > on non-broken MPICs. The symptom is no interrupts being received.
> >
> > The fix is twofold. Firstly the code was broken for multiple isus,
> > we need to index into the shadow array with the src_no, not the idx.
> > Secondly, we always do the read, but only use the VECPRI_MASK and
> > VECPRI_ACTIVITY bits from the hardware, the rest of "val" comes
> > from the shadow.
>
> I'm travelling without remote access to a machine to test this on. Given
> that it changes the errata workaround (subtly), I'd appreciate the chance
> to give it a go before it gets merged.
Sure.
I was also wondering, was this workaround ever required in a released
chip - or was it just dev samples? If it's the latter, do we still need
to carry it at all?
cheers
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* Re: [PATCH] net: fix OF fixed-link property handling on Freescale network device drivers
From: David Miller @ 2009-07-07 2:07 UTC (permalink / raw)
To: grant.likely; +Cc: netdev, afleming, leoli, linuxppc-dev
In-Reply-To: <20090703221851.23909.923.stgit@localhost.localdomain>
From: Grant Likely <grant.likely@secretlab.ca>
Date: Fri, 03 Jul 2009 16:20:19 -0600
> Anton, can you please review, comment and test? I've tested it on an
> mpc8349 board, but that is the only hardware that I have. I've also
> probably made mistakes and it needs to be split up into separate patches,
> but this is probably a sufficient form for first review. I'll also give
> it another once over tomorrow when after I've had a decent night sleep.
Can we get some review and testing of this patch going so we
can fix this regression as soon as possible?
Thanks.
^ permalink raw reply
* [PATCH] mmc: add quirk for controller that doesn't have highspeed bit in host control reg
From: Kevin Hao @ 2009-07-07 2:04 UTC (permalink / raw)
To: avorontsov, pierre, sdhci-devel, linuxppc-dev
FSL eSDHC controller doesn't have highspeed bit in its host control reg.
And the corresponding bit is used to set up the bus width. So add a
quirk to avoid set this bit. Tested on a mpc8377 RDB board.
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
---
drivers/mmc/host/sdhci-of.c | 3 ++-
drivers/mmc/host/sdhci.c | 10 ++++++----
drivers/mmc/host/sdhci.h | 2 ++
3 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c
index d79fa55..1377ec8 100644
--- a/drivers/mmc/host/sdhci-of.c
+++ b/drivers/mmc/host/sdhci-of.c
@@ -173,7 +173,8 @@ static struct sdhci_of_data sdhci_esdhc = {
SDHCI_QUIRK_NONSTANDARD_CLOCK |
SDHCI_QUIRK_PIO_NEEDS_DELAY |
SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET |
- SDHCI_QUIRK_NO_CARD_NO_RESET,
+ SDHCI_QUIRK_NO_CARD_NO_RESET |
+ SDHCI_QUIRK_NO_HIGHSPEED_BIT,
.ops = {
.readl = esdhc_readl,
.readw = esdhc_readw,
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6779b4e..a08fa28 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1143,10 +1143,12 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
else
ctrl &= ~SDHCI_CTRL_4BITBUS;
- if (ios->timing == MMC_TIMING_SD_HS)
- ctrl |= SDHCI_CTRL_HISPD;
- else
- ctrl &= ~SDHCI_CTRL_HISPD;
+ if (!(host->quirks | SDHCI_QUIRK_NO_HIGHSPEED_BIT)) {
+ if (ios->timing == MMC_TIMING_SD_HS)
+ ctrl |= SDHCI_CTRL_HISPD;
+ else
+ ctrl &= ~SDHCI_CTRL_HISPD;
+ }
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 831ddf7..404bb5f 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -232,6 +232,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
/* Controller needs 10ms delay between applying power and clock */
#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
+/* Controller doesn't have highspeed bit in host control reg */
+#define SDHCI_QUIRK_NO_HIGHSPEED_BIT (1<<24)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
--
1.6.2.5
^ permalink raw reply related
* Re: [PATCH] powerpc/mpic: Fix MPIC_BROKEN_REGREAD on non broken MPICs
From: Olof Johansson @ 2009-07-07 8:20 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev
In-Reply-To: <1246926753.4449.1.camel@concordia>
On Tue, Jul 07, 2009 at 10:32:33AM +1000, Michael Ellerman wrote:
> I was also wondering, was this workaround ever required in a released
> chip - or was it just dev samples? If it's the latter, do we still need
> to carry it at all?
It's needed on all versions of hardware but for slightly different
reasons.
I had to research it when the discussion came up, since the first time
I used this workaround it was needed for a different erratum. But yes,
it is there in shipping products -- I was usually pretty careful not to
merge unneeded patches.
-Olof
^ permalink raw reply
* Re: dma_ops->map_page == NULL
From: Benjamin Herrenschmidt @ 2009-07-07 11:08 UTC (permalink / raw)
To: Mark Nelson
Cc: Kári Davíðsson, linuxppc-dev@ozlabs.org,
Kumar Gala
In-Reply-To: <200907071015.24097.markn@au1.ibm.com>
On Tue, 2009-07-07 at 10:15 +1000, Mark Nelson wrote:
>
> When the 32 and 64bit DMA code was merged in .28 , map_/unmap_page() was
> added in favour of map_/unmap_single() (which was later removed in .29)
> so you'll have to replace your calls to dma_map_single() with
> dma_map_page(). Just pass it the page and offset rather than the address.
Wait a minute ... dma_map_single() should still work, it will just call
dma_map_page() underneath. All dma_ops should have a ->map page
callback.
Do you have any dma_ops set for your device at all ? I wonder how we
set the dma_ops for platform devices nowadays ... We use to have this
fallback to direct ops when the dma_ops are NULL but that is gone and
I see no suitable replacement to set them on platform devices for
embedded archs ... oops...
Kumar, Becky, what's the situation there ?
Cheers,
Ben.
^ permalink raw reply
* Re: Inline assembly queries [2]
From: Andreas Schwab @ 2009-07-07 12:40 UTC (permalink / raw)
To: Gabriel Paubert; +Cc: gcc-help, kernel mailz, linux-kernel, linuxppc-dev
In-Reply-To: <20090706065627.GA12499@iram.es>
Gabriel Paubert <paubert@iram.es> writes:
> On Fri, Jul 03, 2009 at 10:57:12PM +0200, Andreas Schwab wrote:
>> The 'Z' constraint is required for a memory operand for insns that don't
>> have an update form (which would be selected by the %U modifier).
>
> Hmmm, I believed that it was for instructions that only have an indexed
> form (all Altivec, byte reverse, and l?arx/st?cx for atomic operations).
>
> Of course none of these instructions have an update form, but they don't
> have an offset encoded in the instruction either.
Yes, you are right. IIRC there are either all u/x/ux forms or only the
x form.
Andreas.
--
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
^ permalink raw reply
* Re: dma_ops->map_page == NULL
From: Jon Smirl @ 2009-07-07 12:50 UTC (permalink / raw)
To: Kári Davíðsson; +Cc: linuxppc-dev@ozlabs.org
In-Reply-To: <4A523984.2080904@marel.com>
On Mon, Jul 6, 2009 at 1:51 PM, K=E1ri Dav=ED=F0sson<kari.davidsson@marel.c=
om> wrote:
> I am doing a driver that uses dma_map_single().
>
> After changing to to linux 2.6.29.3 I am getting
> segfaults in dma_map_single() because dma_ops->map_page is NULL.
> Actually dma_ops looks funky too.
>
> The driver is an of_platform_driver which is declared as an child of
> the lbp (fsl,lpb) node of the device tree.
>
> This is on powerpc 5200b platform.
I have hit this before, in my case the driver pointer was null. It
faulted on dma_ops->map_page which had nothing to do with the real
problem which was the null driver pointer. I spent a long time looking
at this until I figured out that the reported error was bogus compared
to the actual problem.
>
> rg
> kd
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
--=20
Jon Smirl
jonsmirl@gmail.com
^ permalink raw reply
* Re: Inline assembly queries [2]
From: Gabriel Paubert @ 2009-07-07 13:46 UTC (permalink / raw)
To: Andreas Schwab; +Cc: gcc-help, kernel mailz, linux-kernel, linuxppc-dev
In-Reply-To: <m37hykis4d.fsf@hase.home>
On Tue, Jul 07, 2009 at 02:40:02PM +0200, Andreas Schwab wrote:
> Gabriel Paubert <paubert@iram.es> writes:
>
> > On Fri, Jul 03, 2009 at 10:57:12PM +0200, Andreas Schwab wrote:
> >> The 'Z' constraint is required for a memory operand for insns that don't
> >> have an update form (which would be selected by the %U modifier).
> >
> > Hmmm, I believed that it was for instructions that only have an indexed
> > form (all Altivec, byte reverse, and l?arx/st?cx for atomic operations).
> >
> > Of course none of these instructions have an update form, but they don't
> > have an offset encoded in the instruction either.
>
> Yes, you are right. IIRC there are either all u/x/ux forms or only the
> x form.
AFAIR IBM (probably) managed to screw up by making an exception for lwa:
lwa, lwax and lwaux exist, but not lwau!
Gabriel
^ permalink raw reply
* MTD OF parser problem
From: Roman Fietze @ 2009-07-07 13:45 UTC (permalink / raw)
To: linuxppc-dev
Hallo,
I tried to define my MTD partitions in a device tree as
documented. The function of_flash_probe() inside teh file physmap_of.c
never compiled the code below
#ifdef CONFIG_MTD_OF_PARTS
because when the MTD subsystem is compiled as a module I can only find
CONFIG_MTD_OF_PARTS_MODULE beeing defined somewhere below my build
directory.
If I change the above define to
#if defined(CONFIG_MTD_OF_PARTS) || defined(CONFIG_MTD_OF_PARTS_MODULE)
everything is fine and MTD partition work as expected.
My fault? Other solution?
If not, I can submit that tiny patch.
Thanks
Roman
=2D-=20
Roman Fietze Telemotive AG B=FCro M=FChlhausen
^ permalink raw reply
* [PATCH] ehca: use port autodetect mode as default
From: Alexander Schmidt @ 2009-07-07 14:06 UTC (permalink / raw)
To: Roland Dreier
Cc: of-ewg, lkml, linuxppc-dev, Christoph Raisch, of-general,
Hoang-Nam Nguyen, Stefan Roscher
This patch sets the port autodetect mode as default for the ehca driver. The
autodetect code has been in the kernel for several releases now and has
proved to be stable.
---
Roland, please queue this change for 2.6.32 if you are okay with it.
drivers/infiniband/hw/ehca/ehca_main.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- infiniband.git.orig/drivers/infiniband/hw/ehca/ehca_main.c
+++ infiniband.git/drivers/infiniband/hw/ehca/ehca_main.c
@@ -52,7 +52,7 @@
#include "ehca_tools.h"
#include "hcp_if.h"
-#define HCAD_VERSION "0028"
+#define HCAD_VERSION "0029"
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>");
@@ -64,7 +64,7 @@ static int ehca_hw_level = 0;
static int ehca_poll_all_eqs = 1;
int ehca_debug_level = 0;
-int ehca_nr_ports = 2;
+int ehca_nr_ports = -1;
int ehca_use_hp_mr = 0;
int ehca_port_act_time = 30;
int ehca_static_rate = -1;
@@ -95,8 +95,8 @@ MODULE_PARM_DESC(hw_level,
"Hardware level (0: autosensing (default), "
"0x10..0x14: eHCA, 0x20..0x23: eHCA2)");
MODULE_PARM_DESC(nr_ports,
- "number of connected ports (-1: autodetect, 1: port one only, "
- "2: two ports (default)");
+ "number of connected ports (-1: autodetect (default), "
+ "1: port one only, 2: two ports)");
MODULE_PARM_DESC(use_hp_mr,
"Use high performance MRs (default: no)");
MODULE_PARM_DESC(port_act_time,
^ permalink raw reply
* Re: [PATCH] net: fix OF fixed-link property handling on Freescale network device drivers
From: Anton Vorontsov @ 2009-07-07 14:35 UTC (permalink / raw)
To: Grant Likely; +Cc: netdev, leoli, afleming, davem, linuxppc-dev
In-Reply-To: <20090703221851.23909.923.stgit@localhost.localdomain>
On Fri, Jul 03, 2009 at 04:20:19PM -0600, Grant Likely wrote:
> From: Grant Likely <grant.likely@secretlab.ca>
>
> The MDIO rework patches broke the handling of fixed MII links.
[...]
> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
> ---
> Anton, can you please review, comment and test? I've tested it on an
> mpc8349 board, but that is the only hardware that I have. I've also
> probably made mistakes and it needs to be split up into separate patches,
> but this is probably a sufficient form for first review. I'll also give
> it another once over tomorrow when after I've had a decent night sleep.
Did some tests for ucc geth...
Will get to fs_enet a bit later.
> diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
> index 40c6eba..c216cd5 100644
> --- a/drivers/net/ucc_geth.c
> +++ b/drivers/net/ucc_geth.c
> @@ -1443,6 +1443,53 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
> return 0;
> }
>
> +static void ugeth_set_link(struct net_device *dev)
> +{
> + struct ucc_geth_private *ugeth = netdev_priv(dev);
> + struct phy_device *phydev = ugeth->phydev;
> + struct ucc_geth __iomem *ug_regs = ugeth->ug_regs;
> + struct ucc_fast __iomem *uf_regs = ugeth->uccf->uf_regs;
In fixed-link case you'll call set_link() before ucc_struct_init,
so these *_regs are NULL, following oops pops up:
Unable to handle kernel paging request for data at address 0x00000004
Faulting instruction address: 0xc01d6228
Oops: Kernel access of bad area, sig: 11 [#1]
[...]
NIP [c01d6228] ugeth_set_link+0x20/0x158
LR [c01d723c] init_phy+0xa8/0xdc
Call Trace:
[cf831e40] [84042028] 0x84042028 (unreliable)
[cf831e60] [c01d723c] init_phy+0xa8/0xdc
[cf831e80] [c01d8fb8] ucc_geth_open+0x2c/0x2b0
[cf831ea0] [c02040a8] dev_open+0xfc/0x134
[cf831ec0] [c0202670] dev_change_flags+0x84/0x1ac
[cf831ee0] [c03b0cfc] ic_open_devs+0x168/0x2cc
[cf831f20] [c03b20f8] ip_auto_config+0x90/0x2a4
[cf831f60] [c0003894] do_one_initcall+0x34/0x1a8
[cf831fd0] [c03922f8] do_initcalls+0x38/0x58
[cf831fe0] [c0392388] kernel_init+0x38/0x98
[cf831ff0] [c0011b78] kernel_thread+0x4c/0x68
> + u32 tempval = in_be32(&ug_regs->maccfg2);
> + u32 upsmr = in_be32(&uf_regs->upsmr);
[...]
> + default:
> + if (netif_msg_link(ugeth))
> + ugeth_warn("%s: Ack! Speed (%d) is not 10/100/1000!",
> + dev->name, phydev->speed);
You may dereference NULL here.
> + break;
> + }
> +
> + out_be32(&ug_regs->maccfg2, tempval);
(while you're at it, maybe s/tempval/maccfg2/ ?)
> + out_be32(&uf_regs->upsmr, upsmr);
> +}
> +
[...]
> @@ -3708,15 +3710,19 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
>
> ug_info->uf_info.regs = res.start;
> ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
> - fixed_link = of_get_property(np, "fixed-link", NULL);
> - if (fixed_link) {
> - phy = NULL;
> - } else {
> - phy = of_parse_phandle(np, "phy-handle", 0);
> - if (phy == NULL)
> - return -ENODEV;
> +
> + /* Setup the initial link state */
> + prop = of_get_property(np, "fixed-link", &prop_sz);
> + if (prop && prop_sz >= sizeof(*prop) * 3) {
> + ugeth->oldlink = 1;
'ugeth' is NULL at this point, causes this:
Unable to handle kernel paging request for data at address 0x000002c4
Faulting instruction address: 0xc01da0d8
Oops: Kernel access of bad area, sig: 11 [#1]
[...]
NIP [c01da0d8] ucc_geth_probe+0x218/0x530
LR [c01da0c0] ucc_geth_probe+0x200/0x530
Call Trace:
[cf831e00] [c01da0c0] ucc_geth_probe+0x200/0x530 (unreliable)
[cf831e60] [c01eddc4] of_platform_device_probe+0x5c/0x84
[cf831e80] [c019bfd4] really_probe+0x78/0x1a0
[cf831ea0] [c019c1c4] __driver_attach+0xa4/0xa8
[cf831ec0] [c019b3ec] bus_for_each_dev+0x60/0x9c
[cf831ef0] [c019be18] driver_attach+0x24/0x34
[cf831f00] [c019badc] bus_add_driver+0xb4/0x1c4
> + ugeth->oldduplex = prop[1];
> + ugeth->oldspeed = prop[2];
> }
> - ug_info->phy_node = phy;
> +
> + /* Find the phy. Bail if there is no phy and no initial link speed */
> + ug_info->phy_node = of_parse_phandle(np, "phy-handle", 0);
> + if (!ug_info->phy_node && !ugeth->oldlink)
> + return -ENODEV;
>
> /* Find the TBI PHY node. If it's not there, we don't support SGMII */
> ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
> @@ -3725,7 +3731,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
> prop = of_get_property(np, "phy-connection-type", NULL);
> if (!prop) {
> /* handle interface property present in old trees */
> - prop = of_get_property(phy, "interface", NULL);
> + prop = of_get_property(ug_info->phy_node, "interface", NULL);
> if (prop != NULL) {
> phy_interface = enet_to_phy_interface[*prop];
> max_speed = enet_to_speed[*prop];
>
There is another oops, if interface is down:
# ethtool -S eth1
Unable to handle kernel paging request for data at address 0x00000180
Faulting instruction address: 0xc01da7f4
Oops: Kernel access of bad area, sig: 11 [#1]
[...]
NIP [c01da7f4] uec_get_ethtool_stats+0x3c/0x14c
LR [c0207484] ethtool_get_stats+0xfc/0x23c
Call Trace:
[cfb2ddf0] [c0207464] ethtool_get_stats+0xdc/0x23c (unreliable)
[cfb2de30] [c0207b24] dev_ethtool+0x324/0x5a8
[cfb2de60] [c0204ad4] dev_ioctl+0x290/0x320
[cfb2deb0] [c01ef9ac] sock_ioctl+0x80/0x2f4
[cfb2ded0] [c0090814] vfs_ioctl+0x34/0x98
[cfb2dee0] [c009103c] do_vfs_ioctl+0x84/0x2cc
[cfb2df10] [c00912c4] sys_ioctl+0x40/0x74
[cfb2df40] [c0011d54] ret_from_syscall+0x0/0x38
--- Exception: c01 at 0xff64820
LR = 0xffec848
Instruction dump:
80c901b8 70c00001 41820058 8123004c 7cab2b78 39000000 38000000 38e90180
39200012 7d2903a6 5400103a 7c0004ac <7d27002e> 0c090000 4c00012c 7d2a4b78
---[ end trace 7b7ae7cbafe6f2ba ]---
Segmentation fault
Also, now userspace has no chance to know link speed:
# ifconfig eth1 up
# ethtool eth1
Settings for eth1:
Cannot get device settings: No such device
Current message level: 0x0000003f (63)
Link detected: yes
#
(You need to tech *_ethtool.c to report speed/duplex for fixed-link
cases).
Thanks,
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
^ permalink raw reply
* Re: dma_ops->map_page == NULL
From: Kumar Gala @ 2009-07-07 14:37 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Mark Nelson, Kári Davíðsson, Kumar Gala,
linuxppc-dev@ozlabs.org
In-Reply-To: <1246964905.6066.41.camel@pasglop>
On Jul 7, 2009, at 6:08 AM, Benjamin Herrenschmidt wrote:
> On Tue, 2009-07-07 at 10:15 +1000, Mark Nelson wrote:
>>
>> When the 32 and 64bit DMA code was merged in .28 , map_/
>> unmap_page() was
>> added in favour of map_/unmap_single() (which was later removed in .
>> 29)
>> so you'll have to replace your calls to dma_map_single() with
>> dma_map_page(). Just pass it the page and offset rather than the
>> address.
>
> Wait a minute ... dma_map_single() should still work, it will just
> call
> dma_map_page() underneath. All dma_ops should have a ->map page
> callback.
>
> Do you have any dma_ops set for your device at all ? I wonder how we
> set the dma_ops for platform devices nowadays ... We use to have this
> fallback to direct ops when the dma_ops are NULL but that is gone and
> I see no suitable replacement to set them on platform devices for
> embedded archs ... oops...
>
> Kumar, Becky, what's the situation there ?
>
> Cheers,
> Ben.
Is it possible the dev pointer is not valid? I can't remember if that
was a .29 or .30 change that requires us to start passing a valid dev
pointer to get the proper dma_ops.
- k
^ permalink raw reply
* Re: Chipselect in SPI binding with mpc5200-psc-spi
From: Henk Stegeman @ 2009-07-07 14:31 UTC (permalink / raw)
To: Grant Likely, linuxppc-dev
In-Reply-To: <fa686aa40902130719k1d16f936o4776cff371db16ae@mail.gmail.com>
I tried to make use of the irq-controller mode of the GPT as
suggested, however I'm not getting the IRQ.
Does anyone have an idea what I could be missing? (I've been testing
with 2.6.30).
The driver reports from it's probe:
[ 1.502853] spi_master spi32766.0 Unable to get sample IRQ from of
My driver has:
pdata->sample_irq =3D irq_of_parse_and_map(np, 0);
if (pdata->sample_irq =3D=3D NO_IRQ) {
ret =3D pdata->sample_irq;
dev_err(dev, "Unable to get sample IRQ from of\n");
..
}
My dts has:
gpt6: timer@660 { // General Purpose Timer GPT6 in GPIO mode for
SMC4000IO sample irq.
interrupt-controller;
#interrupt-cells =3D <1>;
compatible =3D "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg =3D <0x660 0x10>;
interrupts =3D <1 15 0>;
interrupt-parent =3D <&mpc5200_pic>;
};
io-controller@0 {
compatible =3D "microkey,smc4000io";
linux,modalias =3D "of_smc4000io";
spi-max-frequency =3D <800000>;
spi-cpha;
reg =3D <0>;
word-delay-us =3D <30>;
interrupt-controller =3D <&gpt6>; // Use GPT6 as the IRQ controller
interrupts =3D <2>; // And make it edge falling
};
Thanks in advance,
Henk.
On Fri, Feb 13, 2009 at 5:19 PM, Grant Likely<grant.likely@secretlab.ca> wr=
ote:
> On Fri, Feb 13, 2009 at 3:40 AM, Henk Stegeman <henk.stegeman@gmail.com> =
wrote:
>> I'm busy adding support for slave deviced behind mpc52xx-psc-spi.
>> One complication I have is that my SPI slave device has an interrupt out=
put
>> to the CPU.
>> My idea is to add it as a gpios property in the slave device's
>> configuration:
>>
>> =A0 =A0 =A0 =A0 spi@2400 { =A0 =A0 =A0 =A0// PSC3 (SPI IF to the IO-cont=
roller )
>> =A0 =A0 =A0 =A0 =A0 =A0 device_type =3D "spi";
>> =A0 =A0 =A0 =A0 =A0 =A0 #address-cells =3D <1>;
>> =A0 =A0 =A0 =A0 =A0 =A0 #size-cells =3D <0>;
>> =A0 =A0 =A0 =A0 =A0 =A0 compatible =3D "fsl,mpc5200-psc-spi","fsl,mpc520=
0b-psc-spi";
>> =A0 =A0 =A0 =A0 =A0 =A0 cell-index =3D <2>;
>> =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0x2400 0x100>;
>> =A0 =A0 =A0 =A0 =A0 =A0 interrupts =3D <2 3 0>;
>> =A0 =A0 =A0 =A0 =A0 =A0 interrupt-parent =3D <&mpc5200_pic>;
>> =A0 =A0 =A0 =A0 =A0 =A0 gpios =3D <&gpt4 0 0>;
>>
>> =A0 =A0 =A0 =A0 =A0 =A0 io-controller@0 {
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 compatible =3D "microkey,smc4000io";
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 spi-max-frequency =3D <1000000>;
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0>;
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 // gpios: first is IRQ to cpu
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 gpios =3D <&gpt6 0 0>;
>> =A0 =A0 =A0 =A0 =A0 =A0 };
>
> There is a better way to do this, and driver support for it is
> currently merged into Ben Herrenschmidt's -next tree.
>
> Do this instead:
> =A0 =A0 =A0 =A0io-controller@0 {
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0compatible =3D "microkey,smc4000io";
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0spi-max-frequency =3D <1000000>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0reg =3D <0>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupt-controller =3D < &gpt6 >; =A0 =
=A0 // Use GPT6 as
> the IRQ controller
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupts =3D < 1 >; =A0 =A0// And make i=
t rising edge.
> =A0 =A0 =A0 =A0};
>
> Then add these two properties to the GPT node:
>
> =A0 =A0 =A0 =A0interrupt-controller;
> =A0 =A0 =A0 =A0#interrupt-cells =3D <1>;
>
> Then you can use normal irq_of_parse_and_map() to set up your handler.
>
>> How should I then register my spi slave driver? My smc4000io_probe funct=
ion
>> gets called correctly by of_spi support but when I register as follows:
>>
>> static struct spi_driver smc4000io_driver =3D {
>> =A0 =A0 .driver =3D {
>> =A0 =A0 =A0 =A0 .name =A0 =A0=3D "smc4000io",
>> =A0 =A0 =A0 =A0 .bus =A0 =A0=3D &spi_bus_type,
>> =A0 =A0 =A0 =A0 .owner =A0 =A0=3D THIS_MODULE,
>> =A0 =A0 },
>> =A0 =A0 .probe =A0 =A0 =A0 =A0=3D smc4000io_probe,
>> =A0 =A0 .remove =A0 =A0 =A0 =A0=3D __devexit_p(smc4000io_remove),
>> };
>>
>> static int __init smc4000io_init(void)
>> {
>> =A0 =A0 return spi_register_driver(&smc4000io_driver);
>> }
>>
>> static void __exit smc4000io_exit(void)
>> {
>> =A0 =A0 spi_unregister_driver(&smc4000io_driver);
>> }
>>
>> module_init(smc4000io_init);
>
> Yes, this is right. =A0The psc_spi driver automatically registers all
> spi children that it finds in the device tree onto the SPI bus.
> Therefore registering an spi_driver() is the right thing to do.
>
>> But when I do:
>>
>> static struct of_platform_driver smc4000_spi_of_driver =3D {
>> =A0 =A0 .name =3D "smc4000io",
>> =A0 =A0 .match_table =3D smc4000io_of_match,
>> =A0 =A0 .probe =3D smc4000io_of_probe,
>> =A0 =A0 .remove =A0 =A0 =A0 =A0=3D __devexit_p(smc4000io_of_remove),
>> };
>>
>> static int __init smc4000io_init(void)
>> {
>> =A0 =A0 return of_register_platform_driver(&smc4000_spi_of_driver);
>> }
>> module_init(smc4000io_init);
>>
>> Then my smc4000io_of_probe function never gets called.
>
> Correct. =A0of_platform_driver isn't useful in this case because the
> device cannot exist independently of the SPI bus. =A0Plus an
> of_platform_device doesn't provide any information about the SPI bus
> itself.
>
> g.
>
> --
> Grant Likely, B.Sc., P.Eng.
> Secret Lab Technologies Ltd.
>
^ permalink raw reply
* Re: [PATCH] net: fix OF fixed-link property handling on Freescale network device drivers
From: Anton Vorontsov @ 2009-07-07 15:12 UTC (permalink / raw)
To: Grant Likely; +Cc: netdev, leoli, afleming, davem, linuxppc-dev
In-Reply-To: <20090703221851.23909.923.stgit@localhost.localdomain>
On Fri, Jul 03, 2009 at 04:20:19PM -0600, Grant Likely wrote:
> From: Grant Likely <grant.likely@secretlab.ca>
>
> The MDIO rework patches broke the handling of fixed MII links.
[...]
> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
> ---
> Anton, can you please review, comment and test? I've tested it on an
> mpc8349 board, but that is the only hardware that I have. I've also
> probably made mistakes and it needs to be split up into separate patches,
> but this is probably a sufficient form for first review. I'll also give
> it another once over tomorrow when after I've had a decent night sleep.
fs_enet this time...
[..]
> diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
> index b892c3a..39244b2 100644
> --- a/drivers/net/fs_enet/fs_enet-main.c
> +++ b/drivers/net/fs_enet/fs_enet-main.c
> @@ -722,8 +722,6 @@ static void generic_adjust_link(struct net_device *dev)
> } else if (fep->oldlink) {
> new_state = 1;
> fep->oldlink = 0;
> - fep->oldspeed = 0;
> - fep->oldduplex = -1;
> }
>
> if (new_state && netif_msg_link(fep))
> @@ -749,25 +747,21 @@ static void fs_adjust_link(struct net_device *dev)
> static int fs_init_phy(struct net_device *dev)
> {
> struct fs_enet_private *fep = netdev_priv(dev);
> - struct phy_device *phydev;
>
> - fep->oldlink = 0;
> - fep->oldspeed = 0;
> - fep->oldduplex = -1;
> + /* If a link is already flagged, then set up initial state */
> + if (fep->oldlink) {
> + netif_carrier_on(dev);
> + fep->ops->restart(dev);
->restart() will dereference phydev, which is NULL.
grep for 'phydev' in fs_enet/mac-*.c.
Unable to handle kernel paging request for data at address 0x000000d0
Faulting instruction address: 0xc01842cc
Oops: Kernel access of bad area, sig: 11 [#1]
[...]
NIP [c01842cc] restart+0x3ac/0x434
LR [c0184260] restart+0x340/0x434
Call Trace:
[c3825e60] [c0184260] restart+0x340/0x434 (unreliable)
[c3825e80] [c018231c] fs_init_phy+0x3c/0xbc
[c3825e90] [c01838a4] fs_enet_open+0x110/0x1cc
[c3825eb0] [c01b19b0] dev_open+0xcc/0x130
[c3825ed0] [c01b0100] dev_change_flags+0xb8/0x18c
[c3825ef0] [c030c4e4] ic_open_devs+0x188/0x284
[c3825f30] [c030d770] ip_auto_config+0x7c/0x278
[c3825f60] [c000393c] do_one_initcall+0x58/0x19c
[c3825fd0] [c02f62e4] do_initcalls+0x30/0x50
[c3825fe0] [c02f6374] kernel_init+0x38/0x94
[c3825ff0] [c0010824] kernel_thread+0x4c/0x68
Instruction dump:
901e0004 801c0060 2f800000 419e0020 7c0004ac 801e0004 0c000000 4c00012c
64000002 7c0004ac 901e0004 813d0110 <800900d0> 2f800000 419e0024 7c0004ac
---[ end trace 1ae193a95823d5e4 ]---
And the same comment regarding link speed/duplex reporting for
userspace:
# ethtool eth1
Settings for eth1:
Cannot get device settings: No such device
Current message level: 0x00000000 (0)
Link detected: yes
Thanks,
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
^ permalink raw reply
* Re: dma_ops->map_page == NULL
From: Kári Davíðsson @ 2009-07-07 15:24 UTC (permalink / raw)
To: Kumar Gala; +Cc: Mark Nelson, linuxppc-dev@ozlabs.org, Kumar Gala
In-Reply-To: <A0ABEB1B-3A7A-4068-88EC-33D6D663C87A@kernel.crashing.org>
Yes the device pointer was invalid.
I was passing the of_device pointer instead of
the address of of_device->dev.
But I am sure this was working (passing of_device pointer) with
earlier kernels.
Thanks for the help.
rg
kd
Kumar Gala wrote:
> On Jul 7, 2009, at 6:08 AM, Benjamin Herrenschmidt wrote:
>
>> On Tue, 2009-07-07 at 10:15 +1000, Mark Nelson wrote:
>>> When the 32 and 64bit DMA code was merged in .28 , map_/
>>> unmap_page() was
>>> added in favour of map_/unmap_single() (which was later removed in .
>>> 29)
>>> so you'll have to replace your calls to dma_map_single() with
>>> dma_map_page(). Just pass it the page and offset rather than the
>>> address.
>> Wait a minute ... dma_map_single() should still work, it will just
>> call
>> dma_map_page() underneath. All dma_ops should have a ->map page
>> callback.
>>
>> Do you have any dma_ops set for your device at all ? I wonder how we
>> set the dma_ops for platform devices nowadays ... We use to have this
>> fallback to direct ops when the dma_ops are NULL but that is gone and
>> I see no suitable replacement to set them on platform devices for
>> embedded archs ... oops...
>>
>> Kumar, Becky, what's the situation there ?
>>
>> Cheers,
>> Ben.
>
> Is it possible the dev pointer is not valid? I can't remember if that
> was a .29 or .30 change that requires us to start passing a valid dev
> pointer to get the proper dma_ops.
>
> - k
^ permalink raw reply
* Re: dma_ops->map_page == NULL
From: Becky Bruce @ 2009-07-07 15:49 UTC (permalink / raw)
To: Kumar Gala
Cc: Mark Nelson, Kári Davíðsson, Kumar Gala,
linuxppc-dev@ozlabs.org
In-Reply-To: <A0ABEB1B-3A7A-4068-88EC-33D6D663C87A@kernel.crashing.org>
On Jul 7, 2009, at 9:37 AM, Kumar Gala wrote:
>
> On Jul 7, 2009, at 6:08 AM, Benjamin Herrenschmidt wrote:
>
>> On Tue, 2009-07-07 at 10:15 +1000, Mark Nelson wrote:
>>>
>>> When the 32 and 64bit DMA code was merged in .28 , map_/
>>> unmap_page() was
>>> added in favour of map_/unmap_single() (which was later removed
>>> in .29)
>>> so you'll have to replace your calls to dma_map_single() with
>>> dma_map_page(). Just pass it the page and offset rather than the
>>> address.
>>
>> Wait a minute ... dma_map_single() should still work, it will just
>> call
>> dma_map_page() underneath. All dma_ops should have a ->map page
>> callback.
>>
>>
>> Do you have any dma_ops set for your device at all ? I wonder how we
>> set the dma_ops for platform devices nowadays ... We use to have this
>> fallback to direct ops when the dma_ops are NULL but that is gone and
>> I see no suitable replacement to set them on platform devices for
>> embedded archs ... oops...
There is a platform/of bus notifier that sets the dma_ops to a default
value in arch/powerpc/kernel/setup-common.c.
>>
>>
>> Kumar, Becky, what's the situation there ?
>>
>> Cheers,
>> Ben.
>
> Is it possible the dev pointer is not valid? I can't remember if
> that was a .29 or .30 change that requires us to start passing a
> valid dev pointer to get the proper dma_ops.
I'm pretty sure that went into .29. And invalid dev pointer is the
most likely culprit. IIRC, the usual cause of this is that you're
passing in the *wrong* dev pointer. There are often struct
hierarchies with, confusingly, multiple struct device pointers. You
need the one which has archdata dma_ops setup properly. For an of
device, you want the dev pointer that is part of the of_device struct.
If this isn't your problem, then please post some code so we can look
at this further, and post a log of what's happening.
Cheers,
Becky
^ permalink raw reply
* Re: Chipselect in SPI binding with mpc5200-psc-spi
From: Grant Likely @ 2009-07-07 15:57 UTC (permalink / raw)
To: Henk Stegeman; +Cc: linuxppc-dev
In-Reply-To: <ae4f76fd0907070731p473fef56wdd410db43f6c4c8a@mail.gmail.com>
On Tue, Jul 7, 2009 at 8:31 AM, Henk Stegeman<henk.stegeman@gmail.com> wrot=
e:
> I tried to make use of the irq-controller mode of the GPT as
> suggested, however I'm not getting the IRQ.
> Does anyone have an idea what I could be missing? (I've been testing
> with 2.6.30).
Make sure the 5200 general purpose timer driver is compiled in (not a modul=
e).
>
>
> The driver reports from it's probe:
> [ =A0 =A01.502853] spi_master spi32766.0 Unable to get sample IRQ from of
>
> My driver has:
> =A0 =A0 =A0 =A0pdata->sample_irq =3D irq_of_parse_and_map(np, 0);
> =A0 =A0 =A0 =A0if (pdata->sample_irq =3D=3D NO_IRQ) {
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ret =3D pdata->sample_irq;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0dev_err(dev, "Unable to get sample IRQ fro=
m of\n");
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0..
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0}
>
>
> My dts has:
> =A0 =A0 =A0 =A0gpt6: timer@660 { =A0 =A0 =A0 // General Purpose Timer GPT=
6 in GPIO mode for
> SMC4000IO sample irq.
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupt-controller;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0#interrupt-cells =3D <1>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0compatible =3D "fsl,mpc5200b-gpt","fsl,mpc=
5200-gpt";
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0reg =3D <0x660 0x10>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupts =3D <1 15 0>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupt-parent =3D <&mpc5200_pic>;
> =A0 =A0 =A0 =A0};
>
>
> =A0 =A0 =A0 =A0io-controller@0 {
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0compatible =3D "microkey,smc4000io";
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0linux,modalias =3D "of_smc4000io";
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0spi-max-frequency =3D <800000>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0spi-cpha;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0reg =3D <0>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0word-delay-us =3D <30>;
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupt-controller =3D <&gpt6>; // Use G=
PT6 as the IRQ controller
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupts =3D <2>; // And make it edge fa=
lling
> =A0 =A0 =A0 =A0};
>
>
> Thanks in advance,
>
> Henk.
>
> On Fri, Feb 13, 2009 at 5:19 PM, Grant Likely<grant.likely@secretlab.ca> =
wrote:
>> On Fri, Feb 13, 2009 at 3:40 AM, Henk Stegeman <henk.stegeman@gmail.com>=
wrote:
>>> I'm busy adding support for slave deviced behind mpc52xx-psc-spi.
>>> One complication I have is that my SPI slave device has an interrupt ou=
tput
>>> to the CPU.
>>> My idea is to add it as a gpios property in the slave device's
>>> configuration:
>>>
>>> =A0 =A0 =A0 =A0 spi@2400 { =A0 =A0 =A0 =A0// PSC3 (SPI IF to the IO-con=
troller )
>>> =A0 =A0 =A0 =A0 =A0 =A0 device_type =3D "spi";
>>> =A0 =A0 =A0 =A0 =A0 =A0 #address-cells =3D <1>;
>>> =A0 =A0 =A0 =A0 =A0 =A0 #size-cells =3D <0>;
>>> =A0 =A0 =A0 =A0 =A0 =A0 compatible =3D "fsl,mpc5200-psc-spi","fsl,mpc52=
00b-psc-spi";
>>> =A0 =A0 =A0 =A0 =A0 =A0 cell-index =3D <2>;
>>> =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0x2400 0x100>;
>>> =A0 =A0 =A0 =A0 =A0 =A0 interrupts =3D <2 3 0>;
>>> =A0 =A0 =A0 =A0 =A0 =A0 interrupt-parent =3D <&mpc5200_pic>;
>>> =A0 =A0 =A0 =A0 =A0 =A0 gpios =3D <&gpt4 0 0>;
>>>
>>> =A0 =A0 =A0 =A0 =A0 =A0 io-controller@0 {
>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 compatible =3D "microkey,smc4000io";
>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 spi-max-frequency =3D <1000000>;
>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 reg =3D <0>;
>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 // gpios: first is IRQ to cpu
>>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 gpios =3D <&gpt6 0 0>;
>>> =A0 =A0 =A0 =A0 =A0 =A0 };
>>
>> There is a better way to do this, and driver support for it is
>> currently merged into Ben Herrenschmidt's -next tree.
>>
>> Do this instead:
>> =A0 =A0 =A0 =A0io-controller@0 {
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0compatible =3D "microkey,smc4000io";
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0spi-max-frequency =3D <1000000>;
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0reg =3D <0>;
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupt-controller =3D < &gpt6 >; =A0 =
=A0 // Use GPT6 as
>> the IRQ controller
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0interrupts =3D < 1 >; =A0 =A0// And make =
it rising edge.
>> =A0 =A0 =A0 =A0};
>>
>> Then add these two properties to the GPT node:
>>
>> =A0 =A0 =A0 =A0interrupt-controller;
>> =A0 =A0 =A0 =A0#interrupt-cells =3D <1>;
>>
>> Then you can use normal irq_of_parse_and_map() to set up your handler.
>>
>>> How should I then register my spi slave driver? My smc4000io_probe func=
tion
>>> gets called correctly by of_spi support but when I register as follows:
>>>
>>> static struct spi_driver smc4000io_driver =3D {
>>> =A0 =A0 .driver =3D {
>>> =A0 =A0 =A0 =A0 .name =A0 =A0=3D "smc4000io",
>>> =A0 =A0 =A0 =A0 .bus =A0 =A0=3D &spi_bus_type,
>>> =A0 =A0 =A0 =A0 .owner =A0 =A0=3D THIS_MODULE,
>>> =A0 =A0 },
>>> =A0 =A0 .probe =A0 =A0 =A0 =A0=3D smc4000io_probe,
>>> =A0 =A0 .remove =A0 =A0 =A0 =A0=3D __devexit_p(smc4000io_remove),
>>> };
>>>
>>> static int __init smc4000io_init(void)
>>> {
>>> =A0 =A0 return spi_register_driver(&smc4000io_driver);
>>> }
>>>
>>> static void __exit smc4000io_exit(void)
>>> {
>>> =A0 =A0 spi_unregister_driver(&smc4000io_driver);
>>> }
>>>
>>> module_init(smc4000io_init);
>>
>> Yes, this is right. =A0The psc_spi driver automatically registers all
>> spi children that it finds in the device tree onto the SPI bus.
>> Therefore registering an spi_driver() is the right thing to do.
>>
>>> But when I do:
>>>
>>> static struct of_platform_driver smc4000_spi_of_driver =3D {
>>> =A0 =A0 .name =3D "smc4000io",
>>> =A0 =A0 .match_table =3D smc4000io_of_match,
>>> =A0 =A0 .probe =3D smc4000io_of_probe,
>>> =A0 =A0 .remove =A0 =A0 =A0 =A0=3D __devexit_p(smc4000io_of_remove),
>>> };
>>>
>>> static int __init smc4000io_init(void)
>>> {
>>> =A0 =A0 return of_register_platform_driver(&smc4000_spi_of_driver);
>>> }
>>> module_init(smc4000io_init);
>>>
>>> Then my smc4000io_of_probe function never gets called.
>>
>> Correct. =A0of_platform_driver isn't useful in this case because the
>> device cannot exist independently of the SPI bus. =A0Plus an
>> of_platform_device doesn't provide any information about the SPI bus
>> itself.
>>
>> g.
>>
>> --
>> Grant Likely, B.Sc., P.Eng.
>> Secret Lab Technologies Ltd.
>>
>
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* Re: dma_ops->map_page == NULL
From: Kumar Gala @ 2009-07-07 15:45 UTC (permalink / raw)
To: Kári Davíðsson
Cc: Mark Nelson, linuxppc-dev@ozlabs.org, Kumar Gala
In-Reply-To: <4A5368C7.9020202@marel.com>
On Jul 7, 2009, at 10:24 AM, K=E1ri Dav=ED=F0sson wrote:
> Yes the device pointer was invalid.
>
> I was passing the of_device pointer instead of
> the address of of_device->dev.
>
> But I am sure this was working (passing of_device pointer) with
> earlier kernels.
>
> Thanks for the help.
>
> rg
> kd
earlier kernels didn't care if the dev pointer was valid and thus let =20=
it pass if you didn't give the proper thing.
- k=
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox