* Re: Bug#630845: linux-image-2.6.39-2-powerpc: CHRP Pegasos2 boot failure
From: Ben Hutchings @ 2011-06-26 22:14 UTC (permalink / raw)
To: Gabriel Paubert, Michael Ellerman; +Cc: 630845, Andrew Buckeridge, linuxppc-dev
In-Reply-To: <20110623203654.04f151e1.andrewb@zagam.net>
[-- Attachment #1: Type: text/plain, Size: 979 bytes --]
On Thu, 2011-06-23 at 20:36 +0800, Andrew Buckeridge wrote:
> Package: linux-image-3.0.0-rc3-powerpc
> Version: 3.0.0~rc3-1~experimental.1
>
> On Wed, 22 Jun 2011 04:01:38 +0100
> Ben Hutchings <ben@decadent.org.uk> wrote:
>
> > > linux-image-2.6.36-trunk-powerpc_2.6.36-1~experimental.1_powerpc.deb
> > > linux-image-2.6.37-1-powerpc_2.6.37-1_powerpc.deb
> > > linux-image-2.6.37-2-powerpc_2.6.37-2_powerpc.deb
> > > These failed to boot. In all cases stuck at the spinner.
> >
> > At a guess, this may be fixed by a change in Linux 3.0-rc1:
>
> > Please can you test Linux 3.0-rc3, currently available in experimental?
>
> linux-image-3.0.0-rc3-powerpc_3.0.0~rc3-1~experimental.1_powerpc.deb
> Also failed to boot and got stuck at spinner.
Gabriel, Michael, do you recognise this bug? Are there any fixes for
Pegasos that are missing from 3.0-rc3?
Ben.
--
Ben Hutchings
If more than one person is responsible for a bug, no one is at fault.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply
* Re: [PATCH][upstream] powerpc: Adding bindings for flexcan controller
From: Wolfgang Grandegger @ 2011-06-26 19:10 UTC (permalink / raw)
To: Bhaskar Upadhaya
Cc: SocketCAN Core Mailing List, devicetree-discuss, linuxppc-dev,
inuxppc-dev
In-Reply-To: <1303221511-12903-1-git-send-email-Bhaskar.Upadhaya@freescale.com>
On 04/19/2011 03:58 PM, Bhaskar Upadhaya wrote:
> From: Bhaskar Upadhaya <bhaskar.upadhaya@freescale.com>
>
> Signed-off-by: Bhaskar Upadhaya <bhaskar.upadhaya@freescale.com>
> Acked-By: Scott Wood <scottwood@freescale.com>
> ---
> Based upon git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git (branch -> master)
>
> .../devicetree/bindings/net/can/fsl-flexcan.txt | 61 ++++++++++++++++++++
> 1 files changed, 61 insertions(+), 0 deletions(-)
> create mode 100755 Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
>
> diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> new file mode 100755
> index 0000000..1a729f0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> @@ -0,0 +1,61 @@
> +CAN Device Tree Bindings
> +------------------------
> +2011 Freescale Semiconductor, Inc.
> +
> +fsl,flexcan-v1.0 nodes
> +-----------------------
> +In addition to the required compatible-, reg- and interrupt-properties, you can
> +also specify which clock source shall be used for the controller.
> +
> +CPI Clock- Can Protocol Interface Clock
> + This CLK_SRC bit of CTRL(control register) selects the clock source to
> + the CAN Protocol Interface(CPI) to be either the peripheral clock
> + (driven by the PLL) or the crystal oscillator clock. The selected clock
> + is the one fed to the prescaler to generate the Serial Clock (Sclock).
> + The PRESDIV field of CTRL(control register) controls a prescaler that
> + generates the Serial Clock (Sclock), whose period defines the
> + time quantum used to compose the CAN waveform.
> +
> +Can Engine Clock Source
> + There are two sources for CAN clock
> + - Platform Clock It represents the bus clock
> + - Oscillator Clock
> +
> + Peripheral Clock (PLL)
> + --------------
> + |
> + --------- -------------
> + | |CPI Clock | Prescaler | Sclock
> + | |---------------->| (1.. 256) |------------>
> + --------- -------------
> + | |
> + -------------- ---------------------CLK_SRC
> + Oscillator Clock
> +
> +- fsl,flexcan-clock-source : CAN Engine Clock Source.This property selects
> + the peripheral clock. PLL clock is fed to the
> + prescaler to generate the Serial Clock (Sclock).
> + Valid values are "oscillator" and "platform"
> + "oscillator": CAN engine clock source is oscillator clock.
> + "platform" The CAN engine clock source is the bus clock
> + (platform clock).
> +
> +- fsl,flexcan-clock-divider : for the reference and system clock, an additional
> + clock divider can be specified.
> +- clock-frequency: frequency required to calculate the bitrate for FlexCAN.
> +
> +Note:
> + - v1.0 of flexcan-v1.0 represent the IP block version for P1010 SOC.
> + - P1010 does not have oscillator as the Clock Source.So the default
> + Clock Source is platform clock.
> +Examples:
> +
> + can0@1c000 {
> + compatible = "fsl,flexcan-v1.0";
> + reg = <0x1c000 0x1000>;
> + interrupts = <48 0x2>;
> + interrupt-parent = <&mpic>;
> + fsl,flexcan-clock-source = "platform";
> + fsl,flexcan-clock-divider = <2>;
> + clock-frequency = <fixed by u-boot>;
> + };
I just realized that this patch has hit the mainline kernel but I do not
find the implementation for that new binding. Have I missed something?
Wolfgang.
^ permalink raw reply
* Re: [BUG?]3.0-rc4+ftrace+kprobe: set kprobe at instruction 'stwu' lead to system crash/freeze
From: Masami Hiramatsu @ 2011-06-26 14:47 UTC (permalink / raw)
To: Steven Rostedt, Jim Keniston, Ananth N Mavinakayanahalli
Cc: linux-kernel, Yong Zhang, paulus, yrl.pp-manager.tt, linuxppc-dev
In-Reply-To: <1308911347.531.56.camel@gandalf.stny.rr.com>
(2011/06/24 19:29), Steven Rostedt wrote:
> On Fri, 2011-06-24 at 17:21 +0800, Yong Zhang wrote:
>> Hi,
>>
>> When I use kprobe to do something, I found some wired thing.
>>
>> When CONFIG_FUNCTION_TRACER is disabled:
>> (gdb) disassemble do_fork
>> Dump of assembler code for function do_fork:
>> 0xc0037390 <+0>: mflr r0
>> 0xc0037394 <+4>: stwu r1,-64(r1)
>> 0xc0037398 <+8>: mfcr r12
>> 0xc003739c <+12>: stmw r27,44(r1)
>>
>> Then I:
>> modprobe kprobe_example func=do_fork offset=4
>> ls
>> Things works well.
>>
>> But when CONFIG_FUNCTION_TRACER is enabled:
>> (gdb) disassemble do_fork
>> Dump of assembler code for function do_fork:
>> 0xc0040334 <+0>: mflr r0
>> 0xc0040338 <+4>: stw r0,4(r1)
>> 0xc004033c <+8>: bl 0xc00109d4 <mcount>
>> 0xc0040340 <+12>: stwu r1,-80(r1)
>> 0xc0040344 <+16>: mflr r0
>> 0xc0040348 <+20>: stw r0,84(r1)
>> 0xc004034c <+24>: mfcr r12
>> Then I:
>> modprobe kprobe_example func=do_fork offset=12
>> ls
>> 'ls' will never retrun. system freeze.
>
> I'm not sure if x86 had a similar issue.
>
> Masami, have any ideas to why this happened?
No, I don't familiar with ppc implementation. I guess
that single-step resume code failed to emulate the
instruction, but it strongly depends on ppc arch.
Maybe IBM people may know what happened.
Ananth, Jim, would you have any ideas?
Thank you,
>
> I don't have a PPC32 to test on, but I can try it out on my PPC64.
>
> -- Steve
>
>>
>> I'm using toolchain from:http://www.denx.de/wiki/ELDK-5/WebHome
>> powerpc-linux-gcc -v
>> Using built-in specs.
>> COLLECT_GCC=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/bin/powerpc-linux/powerpc-linux-gcc
>> COLLECT_LTO_WRAPPER=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/libexec/powerpc-linux/gcc/powerpc-linux/4.5.1/lto-wrapper
>> Target: powerpc-linux
>> Configured with:
>> /opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/work/i686-nativesdk-oesdk-linux/gcc-cross-canadian-powerpc-4.5.1-r4/gcc-4.5.1/configure
>> --build=x86_64-linux --host=i686-oesdk-linux --target=powerpc-linux
>> --prefix=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr
>> --exec_prefix=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr
>> --bindir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/bin/powerpc-linux
>> --sbindir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/bin/powerpc-linux
>> --libexecdir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/libexec/powerpc-linux
>> --datadir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/share
>> --sysconfdir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/etc
>> --sharedstatedir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/com
>> --localstatedir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/var
>> --libdir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/lib/powerpc-linux
>> --includedir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/include
>> --oldincludedir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/include
>> --infodir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/share/info
>> --mandir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/share/man
>> --with-libtool-sysroot=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/i686-oesdk-linux-nativesdk
>> --with-gnu-ld --enable-shared --enable-languages=c,c++
>> --enable-threads=posix --disable-multilib --enable-c99
>> --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch
>> --program-prefix=powerpc-linux- --enable-lto --enable-libssp
>> --disable-bootstrap --disable-libgomp --disable-libmudflap
>> --enable-cheaders=c_global
>> --with-local-prefix=/opt/eldk-5.0/powerpc/sysroots/powerpc-linux/usr
>> --with-gxx-include-dir=/usr/include/c++
>> --with-build-time-tools=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/x86_64-linux/usr/powerpc-linux/bin
>> --with-sysroot=/opt/eldk-5.0/powerpc/sysroots/powerpc-linux
>> --with-build-sysroot=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/powerpc
>> --disable-libunwind-exceptions --disable-libssp --disable-libgomp
>> --disable-libmudflap
>> --with-mpfr=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/i686-oesdk-linux-nativesdk
>> --with-mpc=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/i686-oesdk-linux-nativesdk
>> --enable-__cxa_atexit
>> Thread model: posix
>> gcc version 4.5.1 (GCC)
>>
>>
>> And kernel config is attached.
>>
>> BTW, I have made a patch to make kprobe_example set breakpoint easily,
>> attached too.
>>
>> Thanks,
>> Yong
>>
--
Masami HIRAMATSU
Software Platform Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: masami.hiramatsu.pt@hitachi.com
^ permalink raw reply
* powerpc/4xx: Regression failed on sil24 (and other) drivers
From: Ayman El-Khashab @ 2011-06-25 23:52 UTC (permalink / raw)
To: linuxppc-dev; +Cc: cam
I noticed during a recent development with the 460SX that a
simple device that once worked stopped. I did a bisect to
find the offending commit and it turns out to be this one:
0e52247a2ed1f211f0c4f682dc999610a368903f is the first bad
commit
commit 0e52247a2ed1f211f0c4f682dc999610a368903f
Author: Cam Macdonell <cam@cs.ualberta.ca>
Date: Tue Sep 7 17:25:20 2010 -0700
PCI: fix pci_resource_alignment prototype
I found it working with 2.6.36 but it seems that it is in
the current trunk as well.
I patched my code to take out this commit and (quickly)
verified it was ok. I am guessing the patch is ok since it
converts int types to resource_size_t. My guess is that the
problem is in the sil24 driver but I did not see anything
obvious in that code. Any tips on what could be wrong? Is
the problem potentially somewhere being called by that code?
The device driver fails with "error -22" on a 460SX (which
has the 36 bit pci space).
sil24 /drivers/ata/sata_sil24.c
Thanks
Ayman
^ permalink raw reply
* Re: [PATCH 3/4] powerpc: use the newly added get_required_mask dma_map_ops hook
From: Geoff Levand @ 2011-06-25 15:41 UTC (permalink / raw)
To: Nishanth Aravamudan
Cc: cbe-oss-dev, Arnd Bergmann, Rafael J. Wysocki, linux-kernel,
Milton Miller, FUJITA Tomonori, Paul Mackerras, Anton Blanchard,
H. Peter Anvin, Yinghai Lu, Will Schmidt, Andrew Morton,
linuxppc-dev, David S. Miller
In-Reply-To: <1308942325-4813-4-git-send-email-nacc@us.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 389 bytes --]
On 06/24/2011 12:05 PM, Nishanth Aravamudan wrote:
> From: Milton Miller <miltonm@bga.com>
>
> Now that the generic code has dma_map_ops set, instead of having a
> messy ifdef & if block in the base dma_get_required_mask hook push
> the computation into the dma ops.
> arch/powerpc/platforms/ps3/system-bus.c | 7 +++++
Looks OK for PS3.
Acked-by Geoff Levand <geoff@infradead.org>
[-- Attachment #2: 0x2E141B16.asc --]
[-- Type: application/pgp-keys, Size: 9418 bytes --]
^ permalink raw reply
* Re: [RFC PATCH 1/1] BPF JIT for PPC64
From: Eric Dumazet @ 2011-06-25 7:49 UTC (permalink / raw)
To: Andreas Schwab; +Cc: netdev, linuxppc-dev, Matt Evans
In-Reply-To: <m2boxmxt45.fsf@igel.home>
Le samedi 25 juin 2011 à 09:33 +0200, Andreas Schwab a écrit :
> Matt Evans <matt@ozlabs.org> writes:
>
> > + stdu r1, -128(r1); \
>
> > + addi r5, r1, 128+BPF_PPC_STACK_BASIC+(2*8); \
>
> > + addi r1, r1, 128; \
>
> > + PPC_STD(r_M + i, 1, -128 + (8*i));
>
> > + PPC_LD(r_M + i, 1, -128 + (8*i));
>
> s/128/BPF_PPC_STACK_SAVE/?
>
I am not sure using registers to hold MEM[] is a win if MEM[idx] is used
once in the filter
# tcpdump "tcp[20]+tcp[21]=0" -d
(000) ldh [12]
(001) jeq #0x800 jt 2 jf 15
(002) ldb [23]
(003) jeq #0x6 jt 4 jf 15
(004) ldh [20]
(005) jset #0x1fff jt 15 jf 6
(006) ldxb 4*([14]&0xf)
(007) ldb [x + 34]
(008) st M[1]
(009) ldb [x + 35]
(010) tax
(011) ld M[1]
(012) add x
(013) jeq #0x0 jt 14 jf 15
(014) ret #65535
(015) ret #0
In this sample, we use M[1] once ( one store, one load)
So saving previous register content on stack in prologue, and restoring
it in epilogue actually slow down the code, and adds two instructions in filter asm code.
This also makes epilogue code not easy (not possible as a matter of fact)
to unwind in helper function
In x86_64 implementation, I chose bpf_error be able to force
an exception, not returning to JIT code but directly to bpf_func() caller
bpf_error:
# force a return 0 from jit handler
xor %eax,%eax
mov -8(%rbp),%rbx
leaveq
ret
^ permalink raw reply
* Re: [RFC PATCH 1/1] BPF JIT for PPC64
From: Andreas Schwab @ 2011-06-25 7:33 UTC (permalink / raw)
To: Matt Evans; +Cc: netdev, linuxppc-dev
In-Reply-To: <4E04288F.4090201@ozlabs.org>
Matt Evans <matt@ozlabs.org> writes:
> + stdu r1, -128(r1); \
> + addi r5, r1, 128+BPF_PPC_STACK_BASIC+(2*8); \
> + addi r1, r1, 128; \
> + PPC_STD(r_M + i, 1, -128 + (8*i));
> + PPC_LD(r_M + i, 1, -128 + (8*i));
s/128/BPF_PPC_STACK_SAVE/?
Andreas.
--
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
^ permalink raw reply
* Re: [RFC PATCH 1/1] BPF JIT for PPC64
From: Ben Hutchings @ 2011-06-25 1:58 UTC (permalink / raw)
To: Matt Evans; +Cc: netdev, linuxppc-dev
In-Reply-To: <4E04288F.4090201@ozlabs.org>
On Fri, 2011-06-24 at 16:02 +1000, Matt Evans wrote:
[...]
> + case BPF_S_ALU_ADD_K: /* A += K; */
> + if (!K)
> + break;
> + if (K < 32768)
> + PPC_ADDI(r_A, r_A, K);
> + else
> + PPC_ADDI(r_A, r_A, IMM_L(K));
> + PPC_ADDIS(r_A, r_A, IMM_HA(K));
> + break;
Missing braces.
> + case BPF_S_ALU_SUB_X: /* A -= X; */
> + ctx->seen |= SEEN_XREG;
> + PPC_SUB(r_A, r_A, r_X);
> + break;
> + case BPF_S_ALU_SUB_K: /* A -= K */
> + if (!K)
> + break;
> + if (K < 32768)
> + PPC_ADDI(r_A, r_A, -K);
> + else
> + PPC_ADDI(r_A, r_A, IMM_L(-K));
> + PPC_ADDIS(r_A, r_A, IMM_HA(-K));
> + break;
[...]
Here as well.
Ben.
--
Ben Hutchings, Senior Software Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply
* Re: [PATCH] powerpc/85xx: disable timebase synchronization under the hypervisor
From: Benjamin Herrenschmidt @ 2011-06-24 23:36 UTC (permalink / raw)
To: Kumar Gala
Cc: Wood Scott-B07421, Tabi Timur-B04825, linuxppc-dev@ozlabs.org,
paulus@samba.org, McClintock Matthew-B29882, Gala Kumar-B11780
In-Reply-To: <083792FF-81CD-407C-B6B8-6D0481A0D65D@kernel.crashing.org>
On Wed, 2011-06-22 at 06:44 -0500, Kumar Gala wrote:
>
> Any ETA on Paul's intro of the FTR bit? If not I'll pull this into my
> 'next' tree and we can clean up later.
His latest KVM patch set has that.
Cheers,
Ben.
^ permalink raw reply
* Re: [RFC PATCH 0/1] BPF JIT for PPC64
From: Benjamin Herrenschmidt @ 2011-06-24 23:33 UTC (permalink / raw)
To: Kumar Gala; +Cc: netdev, linuxppc-dev, Matt Evans
In-Reply-To: <750BF3E9-A788-4302-8AA1-4630614E20DC@kernel.crashing.org>
On Fri, 2011-06-24 at 04:16 -0500, Kumar Gala wrote:
> > Tested in-situ (tcpdump with varying complexity filters) and with a random BPF
> > generator; I haven't verified loads from the fall back skb_copy_bits path. Bug
> > reports/testing would be very welcome.
>
> Would be nice to get PPC32 support as well.
Patches welcome :-)
Cheers,
Ben.
^ permalink raw reply
* [PATCH 4/4] powerpc: tidy up dma_map_ops after adding new hook
From: Nishanth Aravamudan @ 2011-06-24 19:05 UTC (permalink / raw)
To: Milton Miller
Cc: Rafael J. Wysocki, linuxppc-dev, linux-kernel, Paul Mackerras,
Anton Blanchard, H. Peter Anvin, Nishanth Aravamudan,
Andrew Morton, Yinghai Lu
In-Reply-To: <1308942325-4813-1-git-send-email-nacc@us.ibm.com>
From: Milton Miller <miltonm@bga.com>
The new get_required_mask hook name is longer than many of but not all
of the prior ops. Tidy the struct initializers to align the equal signs
using the local whitespace.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: benh@kernel.crashing.org
---
arch/powerpc/kernel/dma-iommu.c | 14 +++++++-------
arch/powerpc/kernel/dma.c | 16 ++++++++--------
arch/powerpc/kernel/ibmebus.c | 14 +++++++-------
arch/powerpc/kernel/vio.c | 14 +++++++-------
4 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index c1ad9db..6f04b9c 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -104,13 +104,13 @@ static u64 dma_iommu_get_required_mask(struct device *dev)
}
struct dma_map_ops dma_iommu_ops = {
- .alloc_coherent = dma_iommu_alloc_coherent,
- .free_coherent = dma_iommu_free_coherent,
- .map_sg = dma_iommu_map_sg,
- .unmap_sg = dma_iommu_unmap_sg,
- .dma_supported = dma_iommu_dma_supported,
- .map_page = dma_iommu_map_page,
- .unmap_page = dma_iommu_unmap_page,
+ .alloc_coherent = dma_iommu_alloc_coherent,
+ .free_coherent = dma_iommu_free_coherent,
+ .map_sg = dma_iommu_map_sg,
+ .unmap_sg = dma_iommu_unmap_sg,
+ .dma_supported = dma_iommu_dma_supported,
+ .map_page = dma_iommu_map_page,
+ .unmap_page = dma_iommu_unmap_page,
.get_required_mask = dma_iommu_get_required_mask,
};
EXPORT_SYMBOL(dma_iommu_ops);
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index df142d1..f94df52 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -149,14 +149,14 @@ static inline void dma_direct_sync_single(struct device *dev,
#endif
struct dma_map_ops dma_direct_ops = {
- .alloc_coherent = dma_direct_alloc_coherent,
- .free_coherent = dma_direct_free_coherent,
- .map_sg = dma_direct_map_sg,
- .unmap_sg = dma_direct_unmap_sg,
- .dma_supported = dma_direct_dma_supported,
- .map_page = dma_direct_map_page,
- .unmap_page = dma_direct_unmap_page,
- .get_required_mask = dma_direct_get_required_mask,
+ .alloc_coherent = dma_direct_alloc_coherent,
+ .free_coherent = dma_direct_free_coherent,
+ .map_sg = dma_direct_map_sg,
+ .unmap_sg = dma_direct_unmap_sg,
+ .dma_supported = dma_direct_dma_supported,
+ .map_page = dma_direct_map_page,
+ .unmap_page = dma_direct_unmap_page,
+ .get_required_mask = dma_direct_get_required_mask,
#ifdef CONFIG_NOT_COHERENT_CACHE
.sync_single_for_cpu = dma_direct_sync_single,
.sync_single_for_device = dma_direct_sync_single,
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 90ef2a4..73110fb 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -134,14 +134,14 @@ static u64 ibmebus_dma_get_required_mask(struct device *dev)
}
static struct dma_map_ops ibmebus_dma_ops = {
- .alloc_coherent = ibmebus_alloc_coherent,
- .free_coherent = ibmebus_free_coherent,
- .map_sg = ibmebus_map_sg,
- .unmap_sg = ibmebus_unmap_sg,
- .dma_supported = ibmebus_dma_supported,
+ .alloc_coherent = ibmebus_alloc_coherent,
+ .free_coherent = ibmebus_free_coherent,
+ .map_sg = ibmebus_map_sg,
+ .unmap_sg = ibmebus_unmap_sg,
+ .dma_supported = ibmebus_dma_supported,
.get_required_mask = ibmebus_dma_get_required_mask,
- .map_page = ibmebus_map_page,
- .unmap_page = ibmebus_unmap_page,
+ .map_page = ibmebus_map_page,
+ .unmap_page = ibmebus_unmap_page,
};
static int ibmebus_match_path(struct device *dev, void *data)
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index c049325..34d291d 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -611,13 +611,13 @@ static u64 vio_dma_get_required_mask(struct device *dev)
}
struct dma_map_ops vio_dma_mapping_ops = {
- .alloc_coherent = vio_dma_iommu_alloc_coherent,
- .free_coherent = vio_dma_iommu_free_coherent,
- .map_sg = vio_dma_iommu_map_sg,
- .unmap_sg = vio_dma_iommu_unmap_sg,
- .map_page = vio_dma_iommu_map_page,
- .unmap_page = vio_dma_iommu_unmap_page,
- .dma_supported = vio_dma_iommu_dma_supported,
+ .alloc_coherent = vio_dma_iommu_alloc_coherent,
+ .free_coherent = vio_dma_iommu_free_coherent,
+ .map_sg = vio_dma_iommu_map_sg,
+ .unmap_sg = vio_dma_iommu_unmap_sg,
+ .map_page = vio_dma_iommu_map_page,
+ .unmap_page = vio_dma_iommu_unmap_page,
+ .dma_supported = vio_dma_iommu_dma_supported,
.get_required_mask = vio_dma_get_required_mask,
};
--
1.7.4.1
^ permalink raw reply related
* [PATCH 2/4] dma-mapping: add get_required_mask if arch overrides default
From: Nishanth Aravamudan @ 2011-06-24 19:05 UTC (permalink / raw)
To: Milton Miller; +Cc: Vinod Koul, Dan Williams, linuxppc-dev, linux-kernel
In-Reply-To: <1308942325-4813-1-git-send-email-nacc@us.ibm.com>
From: Milton Miller <miltonm@bga.com>
If an architecture sets ARCH_HAS_DMA_GET_REQUIRED_MASK and has settable
dma_map_ops, the required mask may change by the ops implementation.
For example, a system that always has an mmu inline may only require 32
bits while a swiotlb would desire bits to cover all of memory.
Therefore add the field if the architecture does not use the generic
definition of dma_get_required_mask. The first use will by by powerpc.
Note that this does add some dependency on the order in which files are
visible here.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: benh@kernel.crashing.org
---
include/linux/dma-mapping.h | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index ba8319a..d0e023b 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -49,6 +49,9 @@ struct dma_map_ops {
int (*mapping_error)(struct device *dev, dma_addr_t dma_addr);
int (*dma_supported)(struct device *dev, u64 mask);
int (*set_dma_mask)(struct device *dev, u64 mask);
+#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
+ u64 (*get_required_mask)(struct device *dev);
+#endif
int is_phys;
};
--
1.7.4.1
^ permalink raw reply related
* [PATCH 0/4] pseries/iommu bug-fixes and cleanups for dynamic dma windows
From: Nishanth Aravamudan @ 2011-06-24 19:05 UTC (permalink / raw)
To: Milton Miller; +Cc: linuxppc-dev, linux-kernel
In my last submission, 5/8 wasn't sent to Ben, so he only picked up 1-4.
Re-sending 5-8, as such.
Milton Miller (4):
powerpc: override dma_get_required_mask by platform hook and ops
dma-mapping: add get_required_mask if arch overrides default
powerpc: use the newly added get_required_mask dma_map_ops hook
powerpc: tidy up dma_map_ops after adding new hook
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: benh@kernel.crashing.org
arch/powerpc/include/asm/device.h | 2 +
arch/powerpc/include/asm/machdep.h | 3 +-
arch/powerpc/kernel/dma-iommu.c | 28 ++++++++++++++-----
arch/powerpc/kernel/dma-swiotlb.c | 16 +++++++++++
arch/powerpc/kernel/dma.c | 44 ++++++++++++++++++++++++++-----
arch/powerpc/kernel/ibmebus.c | 22 ++++++++++-----
arch/powerpc/kernel/vio.c | 21 +++++++++-----
arch/powerpc/platforms/cell/iommu.c | 21 ++++++++++++++
arch/powerpc/platforms/ps3/system-bus.c | 7 +++++
arch/powerpc/platforms/pseries/iommu.c | 27 +++++++++++++++++++
include/linux/dma-mapping.h | 3 ++
11 files changed, 163 insertions(+), 31 deletions(-)
--
1.7.4.1
^ permalink raw reply
* [PATCH 3/4] powerpc: use the newly added get_required_mask dma_map_ops hook
From: Nishanth Aravamudan @ 2011-06-24 19:05 UTC (permalink / raw)
To: Milton Miller
Cc: cbe-oss-dev, Arnd Bergmann, Geoff Levand, Rafael J. Wysocki,
linux-kernel, FUJITA Tomonori, Will Schmidt, Paul Mackerras,
Anton Blanchard, H. Peter Anvin, Yinghai Lu, Nishanth Aravamudan,
Andrew Morton, linuxppc-dev, David S. Miller
In-Reply-To: <1308942325-4813-1-git-send-email-nacc@us.ibm.com>
From: Milton Miller <miltonm@bga.com>
Now that the generic code has dma_map_ops set, instead of having a
messy ifdef & if block in the base dma_get_required_mask hook push
the computation into the dma ops.
If the ops fails to set the get_required_mask hook default to the
width of dma_addr_t.
This also corrects ibmbus ibmebus_dma_supported to require a 64
bit mask. I doubt anything is checking or setting the dma mask on
that bus.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: benh@kernel.crashing.org
---
arch/powerpc/include/asm/device.h | 2 +
arch/powerpc/include/asm/dma-mapping.h | 3 --
arch/powerpc/kernel/dma-iommu.c | 3 +-
arch/powerpc/kernel/dma-swiotlb.c | 16 ++++++++++++
arch/powerpc/kernel/dma.c | 41 ++++++++++++-------------------
arch/powerpc/kernel/ibmebus.c | 8 +++++-
arch/powerpc/kernel/vio.c | 7 ++++-
arch/powerpc/platforms/cell/iommu.c | 13 ++++++++-
arch/powerpc/platforms/ps3/system-bus.c | 7 +++++
arch/powerpc/platforms/pseries/iommu.c | 2 +-
10 files changed, 68 insertions(+), 34 deletions(-)
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 16d25c0..d57c08a 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -37,4 +37,6 @@ struct pdev_archdata {
u64 dma_mask;
};
+#define ARCH_HAS_DMA_GET_REQUIRED_MASK
+
#endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 8135e66..dd70fac 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -20,8 +20,6 @@
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
-#define ARCH_HAS_DMA_GET_REQUIRED_MASK
-
/* Some dma direct funcs must be visible for use in other dma_ops */
extern void *dma_direct_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag);
@@ -71,7 +69,6 @@ static inline unsigned long device_to_mask(struct device *dev)
*/
#ifdef CONFIG_PPC64
extern struct dma_map_ops dma_iommu_ops;
-extern u64 dma_iommu_get_required_mask(struct device *dev);
#endif
extern struct dma_map_ops dma_direct_ops;
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 1f2a711..c1ad9db 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -90,7 +90,7 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask)
return 1;
}
-u64 dma_iommu_get_required_mask(struct device *dev)
+static u64 dma_iommu_get_required_mask(struct device *dev)
{
struct iommu_table *tbl = get_iommu_table_base(dev);
u64 mask;
@@ -111,5 +111,6 @@ struct dma_map_ops dma_iommu_ops = {
.dma_supported = dma_iommu_dma_supported,
.map_page = dma_iommu_map_page,
.unmap_page = dma_iommu_unmap_page,
+ .get_required_mask = dma_iommu_get_required_mask,
};
EXPORT_SYMBOL(dma_iommu_ops);
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 4295e0b..1ebc918 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -24,6 +24,21 @@
unsigned int ppc_swiotlb_enable;
+static u64 swiotlb_powerpc_get_required(struct device *dev)
+{
+ u64 end, mask, max_direct_dma_addr = dev->archdata.max_direct_dma_addr;
+
+ end = memblock_end_of_DRAM();
+ if (max_direct_dma_addr && end > max_direct_dma_addr)
+ end = max_direct_dma_addr;
+ end += get_dma_offset(dev);
+
+ mask = 1ULL << (fls64(end) - 1);
+ mask += mask - 1;
+
+ return mask;
+}
+
/*
* At the moment, all platforms that use this code only require
* swiotlb to be used if we're operating on HIGHMEM. Since
@@ -44,6 +59,7 @@ struct dma_map_ops swiotlb_dma_ops = {
.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
.sync_sg_for_device = swiotlb_sync_sg_for_device,
.mapping_error = swiotlb_dma_mapping_error,
+ .get_required_mask = swiotlb_powerpc_get_required,
};
void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 97fe867..df142d1 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -96,6 +96,18 @@ static int dma_direct_dma_supported(struct device *dev, u64 mask)
#endif
}
+static u64 dma_direct_get_required_mask(struct device *dev)
+{
+ u64 end, mask;
+
+ end = memblock_end_of_DRAM() + get_dma_offset(dev);
+
+ mask = 1ULL << (fls64(end) - 1);
+ mask += mask - 1;
+
+ return mask;
+}
+
static inline dma_addr_t dma_direct_map_page(struct device *dev,
struct page *page,
unsigned long offset,
@@ -144,6 +156,7 @@ struct dma_map_ops dma_direct_ops = {
.dma_supported = dma_direct_dma_supported,
.map_page = dma_direct_map_page,
.unmap_page = dma_direct_unmap_page,
+ .get_required_mask = dma_direct_get_required_mask,
#ifdef CONFIG_NOT_COHERENT_CACHE
.sync_single_for_cpu = dma_direct_sync_single,
.sync_single_for_device = dma_direct_sync_single,
@@ -175,7 +188,6 @@ EXPORT_SYMBOL(dma_set_mask);
u64 dma_get_required_mask(struct device *dev)
{
struct dma_map_ops *dma_ops = get_dma_ops(dev);
- u64 mask, end = 0;
if (ppc_md.dma_get_required_mask)
return ppc_md.dma_get_required_mask(dev);
@@ -183,31 +195,10 @@ u64 dma_get_required_mask(struct device *dev)
if (unlikely(dma_ops == NULL))
return 0;
-#ifdef CONFIG_PPC64
- else if (dma_ops == &dma_iommu_ops)
- return dma_iommu_get_required_mask(dev);
-#endif
-#ifdef CONFIG_SWIOTLB
- else if (dma_ops == &swiotlb_dma_ops) {
- u64 max_direct_dma_addr = dev->archdata.max_direct_dma_addr;
-
- end = memblock_end_of_DRAM();
- if (max_direct_dma_addr && end > max_direct_dma_addr)
- end = max_direct_dma_addr;
- end += get_dma_offset(dev);
- }
-#endif
- else if (dma_ops == &dma_direct_ops)
- end = memblock_end_of_DRAM() + get_dma_offset(dev);
- else {
- WARN_ONCE(1, "%s: unknown ops %p\n", __func__, dma_ops);
- end = memblock_end_of_DRAM();
- }
+ if (dma_ops->get_required_mask)
+ return dma_ops->get_required_mask(dev);
- mask = 1ULL << (fls64(end) - 1);
- mask += mask - 1;
-
- return mask;
+ return DMA_BIT_MASK(8 * sizeof(dma_addr_t));
}
EXPORT_SYMBOL_GPL(dma_get_required_mask);
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 28581f1..90ef2a4 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -125,7 +125,12 @@ static void ibmebus_unmap_sg(struct device *dev,
static int ibmebus_dma_supported(struct device *dev, u64 mask)
{
- return 1;
+ return mask == DMA_BIT_MASK(64);
+}
+
+static u64 ibmebus_dma_get_required_mask(struct device *dev)
+{
+ return DMA_BIT_MASK(64);
}
static struct dma_map_ops ibmebus_dma_ops = {
@@ -134,6 +139,7 @@ static struct dma_map_ops ibmebus_dma_ops = {
.map_sg = ibmebus_map_sg,
.unmap_sg = ibmebus_unmap_sg,
.dma_supported = ibmebus_dma_supported,
+ .get_required_mask = ibmebus_dma_get_required_mask,
.map_page = ibmebus_map_page,
.unmap_page = ibmebus_unmap_page,
};
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 1b695fd..c049325 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -605,6 +605,11 @@ static int vio_dma_iommu_dma_supported(struct device *dev, u64 mask)
return dma_iommu_ops.dma_supported(dev, mask);
}
+static u64 vio_dma_get_required_mask(struct device *dev)
+{
+ return dma_iommu_ops.get_required_mask(dev);
+}
+
struct dma_map_ops vio_dma_mapping_ops = {
.alloc_coherent = vio_dma_iommu_alloc_coherent,
.free_coherent = vio_dma_iommu_free_coherent,
@@ -613,7 +618,7 @@ struct dma_map_ops vio_dma_mapping_ops = {
.map_page = vio_dma_iommu_map_page,
.unmap_page = vio_dma_iommu_unmap_page,
.dma_supported = vio_dma_iommu_dma_supported,
-
+ .get_required_mask = vio_dma_get_required_mask,
};
/**
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 5ef55f3..fc46fca 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -1161,11 +1161,20 @@ __setup("iommu_fixed=", setup_iommu_fixed);
static u64 cell_dma_get_required_mask(struct device *dev)
{
+ struct dma_map_ops *dma_ops;
+
if (!dev->dma_mask)
return 0;
- if (iommu_fixed_disabled && get_dma_ops(dev) == &dma_iommu_ops)
- return dma_iommu_get_required_mask(dev);
+ if (!iommu_fixed_disabled &&
+ cell_iommu_get_fixed_address(dev) != OF_BAD_ADDR)
+ return DMA_BIT_MASK(64);
+
+ dma_ops = get_dma_ops(dev);
+ if (dma_ops->get_required_mask)
+ return dma_ops->get_required_mask(dev);
+
+ WARN_ONCE(1, "no get_required_mask in %p ops", dma_ops);
return DMA_BIT_MASK(64);
}
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 23083c3..688141c 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -695,12 +695,18 @@ static int ps3_dma_supported(struct device *_dev, u64 mask)
return mask >= DMA_BIT_MASK(32);
}
+static u64 ps3_dma_get_required_mask(struct device *_dev)
+{
+ return DMA_BIT_MASK(32);
+}
+
static struct dma_map_ops ps3_sb_dma_ops = {
.alloc_coherent = ps3_alloc_coherent,
.free_coherent = ps3_free_coherent,
.map_sg = ps3_sb_map_sg,
.unmap_sg = ps3_sb_unmap_sg,
.dma_supported = ps3_dma_supported,
+ .get_required_mask = ps3_dma_get_required_mask,
.map_page = ps3_sb_map_page,
.unmap_page = ps3_unmap_page,
};
@@ -711,6 +717,7 @@ static struct dma_map_ops ps3_ioc0_dma_ops = {
.map_sg = ps3_ioc0_map_sg,
.unmap_sg = ps3_ioc0_unmap_sg,
.dma_supported = ps3_dma_supported,
+ .get_required_mask = ps3_dma_get_required_mask,
.map_page = ps3_ioc0_map_page,
.unmap_page = ps3_unmap_page,
};
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index fe5eded..9f121a3 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -1099,7 +1099,7 @@ static u64 dma_get_required_mask_pSeriesLP(struct device *dev)
return DMA_BIT_MASK(64);
}
- return dma_iommu_get_required_mask(dev);
+ return dma_iommu_ops.get_required_mask(dev);
}
#else /* CONFIG_PCI */
--
1.7.4.1
^ permalink raw reply related
* [PATCH 1/4] powerpc: override dma_get_required_mask by platform hook and ops
From: Nishanth Aravamudan @ 2011-06-24 19:05 UTC (permalink / raw)
To: Milton Miller
Cc: cbe-oss-dev, FUJITA Tomonori, Arnd Bergmann, Sonny Rao,
devicetree-discuss, linux-kernel, Will Schmidt, Paul Mackerras,
Anton Blanchard, H. Peter Anvin, Yinghai Lu, Nishanth Aravamudan,
Andrew Morton, linuxppc-dev
In-Reply-To: <1308942325-4813-1-git-send-email-nacc@us.ibm.com>
From: Milton Miller <miltonm@bga.com>
The hook dma_get_required_mask is supposed to return the mask required
by the platform to operate efficently. The generic version of
dma_get_required_mask in driver/base/platform.c returns a mask based
only on max_pfn. However, this is likely too big for iommu systems
and could be too small for platforms that require a dma offset or have
a secondary window at a high offset.
Override the default, provide a hook in ppc_md used by pseries lpar and
cell, and provide the default answer based on memblock_end_of_DRAM(),
with hooks for get_dma_offset, and provide an implementation for iommu
that looks at the defined table size. Coverting from the end address
to the required bit mask is based on the generic implementation.
The need for this was discovered when the qla2xxx driver switched to
64 bit dma then reverted to 32 bit when dma_get_required_mask said
32 bits was sufficient.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Cc: benh@kernel.crashing.org
---
arch/powerpc/include/asm/dma-mapping.h | 3 ++
arch/powerpc/include/asm/machdep.h | 3 +-
arch/powerpc/kernel/dma-iommu.c | 13 ++++++++++
arch/powerpc/kernel/dma.c | 39 ++++++++++++++++++++++++++++++++
arch/powerpc/platforms/cell/iommu.c | 12 +++++++++
arch/powerpc/platforms/pseries/iommu.c | 27 ++++++++++++++++++++++
6 files changed, 96 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index dd70fac..8135e66 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -20,6 +20,8 @@
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
+#define ARCH_HAS_DMA_GET_REQUIRED_MASK
+
/* Some dma direct funcs must be visible for use in other dma_ops */
extern void *dma_direct_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag);
@@ -69,6 +71,7 @@ static inline unsigned long device_to_mask(struct device *dev)
*/
#ifdef CONFIG_PPC64
extern struct dma_map_ops dma_iommu_ops;
+extern u64 dma_iommu_get_required_mask(struct device *dev);
#endif
extern struct dma_map_ops dma_direct_ops;
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 47cacdd..58fc216 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -85,8 +85,9 @@ struct machdep_calls {
void (*pci_dma_dev_setup)(struct pci_dev *dev);
void (*pci_dma_bus_setup)(struct pci_bus *bus);
- /* Platform set_dma_mask override */
+ /* Platform set_dma_mask and dma_get_required_mask overrides */
int (*dma_set_mask)(struct device *dev, u64 dma_mask);
+ u64 (*dma_get_required_mask)(struct device *dev);
int (*probe)(void);
void (*setup_arch)(void); /* Optional, may be NULL */
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index e755415..1f2a711 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -90,6 +90,19 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask)
return 1;
}
+u64 dma_iommu_get_required_mask(struct device *dev)
+{
+ struct iommu_table *tbl = get_iommu_table_base(dev);
+ u64 mask;
+ if (!tbl)
+ return 0;
+
+ mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
+ mask += mask - 1;
+
+ return mask;
+}
+
struct dma_map_ops dma_iommu_ops = {
.alloc_coherent = dma_iommu_alloc_coherent,
.free_coherent = dma_iommu_free_coherent,
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index d238c08..97fe867 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -172,6 +172,45 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
}
EXPORT_SYMBOL(dma_set_mask);
+u64 dma_get_required_mask(struct device *dev)
+{
+ struct dma_map_ops *dma_ops = get_dma_ops(dev);
+ u64 mask, end = 0;
+
+ if (ppc_md.dma_get_required_mask)
+ return ppc_md.dma_get_required_mask(dev);
+
+ if (unlikely(dma_ops == NULL))
+ return 0;
+
+#ifdef CONFIG_PPC64
+ else if (dma_ops == &dma_iommu_ops)
+ return dma_iommu_get_required_mask(dev);
+#endif
+#ifdef CONFIG_SWIOTLB
+ else if (dma_ops == &swiotlb_dma_ops) {
+ u64 max_direct_dma_addr = dev->archdata.max_direct_dma_addr;
+
+ end = memblock_end_of_DRAM();
+ if (max_direct_dma_addr && end > max_direct_dma_addr)
+ end = max_direct_dma_addr;
+ end += get_dma_offset(dev);
+ }
+#endif
+ else if (dma_ops == &dma_direct_ops)
+ end = memblock_end_of_DRAM() + get_dma_offset(dev);
+ else {
+ WARN_ONCE(1, "%s: unknown ops %p\n", __func__, dma_ops);
+ end = memblock_end_of_DRAM();
+ }
+
+ mask = 1ULL << (fls64(end) - 1);
+ mask += mask - 1;
+
+ return mask;
+}
+EXPORT_SYMBOL_GPL(dma_get_required_mask);
+
static int __init dma_init(void)
{
dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 26a0671..5ef55f3 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -1159,6 +1159,17 @@ static int __init setup_iommu_fixed(char *str)
}
__setup("iommu_fixed=", setup_iommu_fixed);
+static u64 cell_dma_get_required_mask(struct device *dev)
+{
+ if (!dev->dma_mask)
+ return 0;
+
+ if (iommu_fixed_disabled && get_dma_ops(dev) == &dma_iommu_ops)
+ return dma_iommu_get_required_mask(dev);
+
+ return DMA_BIT_MASK(64);
+}
+
static int __init cell_iommu_init(void)
{
struct device_node *np;
@@ -1175,6 +1186,7 @@ static int __init cell_iommu_init(void)
/* Setup various ppc_md. callbacks */
ppc_md.pci_dma_dev_setup = cell_pci_dma_dev_setup;
+ ppc_md.dma_get_required_mask = cell_dma_get_required_mask;
ppc_md.tce_build = tce_build_cell;
ppc_md.tce_free = tce_free_cell;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 01faab9..fe5eded 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -1077,12 +1077,38 @@ check_mask:
return 0;
}
+static u64 dma_get_required_mask_pSeriesLP(struct device *dev)
+{
+ if (!dev->dma_mask)
+ return 0;
+
+ if (!disable_ddw && dev_is_pci(dev)) {
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct device_node *dn;
+
+ dn = pci_device_to_OF_node(pdev);
+
+ /* search upwards for ibm,dma-window */
+ for (; dn && PCI_DN(dn) && !PCI_DN(dn)->iommu_table;
+ dn = dn->parent)
+ if (of_get_property(dn, "ibm,dma-window", NULL))
+ break;
+ /* if there is a ibm,ddw-applicable property require 64 bits */
+ if (dn && PCI_DN(dn) &&
+ of_get_property(dn, "ibm,ddw-applicable", NULL))
+ return DMA_BIT_MASK(64);
+ }
+
+ return dma_iommu_get_required_mask(dev);
+}
+
#else /* CONFIG_PCI */
#define pci_dma_bus_setup_pSeries NULL
#define pci_dma_dev_setup_pSeries NULL
#define pci_dma_bus_setup_pSeriesLP NULL
#define pci_dma_dev_setup_pSeriesLP NULL
#define dma_set_mask_pSeriesLP NULL
+#define dma_get_required_mask_pSeriesLP NULL
#endif /* !CONFIG_PCI */
static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action,
@@ -1186,6 +1212,7 @@ void iommu_init_early_pSeries(void)
ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pSeriesLP;
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_pSeriesLP;
ppc_md.dma_set_mask = dma_set_mask_pSeriesLP;
+ ppc_md.dma_get_required_mask = dma_get_required_mask_pSeriesLP;
} else {
ppc_md.tce_build = tce_build_pSeries;
ppc_md.tce_free = tce_free_pSeries;
--
1.7.4.1
^ permalink raw reply related
* Re: [PATCH] powerpc/85xx: disable timebase synchronization under the hypervisor
From: Scott Wood @ 2011-06-24 15:16 UTC (permalink / raw)
To: Tabi Timur-B04825
Cc: Wood Scott-B07421, linuxppc-dev@ozlabs.org, paulus@samba.org,
McClintock Matthew-B29882, Gala Kumar-B11780
In-Reply-To: <4E03F8C1.60706@freescale.com>
On Thu, 23 Jun 2011 21:38:58 -0500
Tabi Timur-B04825 <B04825@freescale.com> wrote:
> Segher Boessenkool wrote:
> >
> > v2.06 III-E 9.2.1:
> > "Writing the Time Base is hypervisor privileged."
> >
> > v2.06 III-E 2.1:
> > "If a hypervisor-privileged register is accessed in the guest supervisor
> > state (MSR[GS PR] = 0b10), an Embedded Hypervisor Privilege exception
> > occurs."
> >
> > (v2.06 III-E 5.4.1, the big SPR table, also shows the TB regs (for writing,
> > i.e. 284 and 285) to be hypervisor privileged. Consistency, hurray :-) )
>
> To me, all this means that a guest cannot write to the actual timebase
> register. I'm not interpreting this to mean that a hypervisor can't
> virtualize the timebase and allow a guest to read/write a virtual timebase
> register, so that it thinks it's writing to the real hardware timebase register.
>
Right, I was referring to the virtualized implementation note added in
2.06B. The virtualized implementation notes apply to what happens in the
guest as seen by the guest (considered as a separate implementation of the
Power ISA), not to what happens at a hardware level in guest mode.
-Scott
^ permalink raw reply
* Re: [BUG?]3.0-rc4+ftrace+kprobe: set kprobe at instruction 'stwu' lead to system crash/freeze
From: Steven Rostedt @ 2011-06-24 10:29 UTC (permalink / raw)
To: Yong Zhang; +Cc: linux-kernel, paulus, Masami Hiramatsu, linuxppc-dev
In-Reply-To: <BANLkTi=gx73d6-s-jqeke05SQYorpnzLVw@mail.gmail.com>
On Fri, 2011-06-24 at 17:21 +0800, Yong Zhang wrote:
> Hi,
>
> When I use kprobe to do something, I found some wired thing.
>
> When CONFIG_FUNCTION_TRACER is disabled:
> (gdb) disassemble do_fork
> Dump of assembler code for function do_fork:
> 0xc0037390 <+0>: mflr r0
> 0xc0037394 <+4>: stwu r1,-64(r1)
> 0xc0037398 <+8>: mfcr r12
> 0xc003739c <+12>: stmw r27,44(r1)
>
> Then I:
> modprobe kprobe_example func=do_fork offset=4
> ls
> Things works well.
>
> But when CONFIG_FUNCTION_TRACER is enabled:
> (gdb) disassemble do_fork
> Dump of assembler code for function do_fork:
> 0xc0040334 <+0>: mflr r0
> 0xc0040338 <+4>: stw r0,4(r1)
> 0xc004033c <+8>: bl 0xc00109d4 <mcount>
> 0xc0040340 <+12>: stwu r1,-80(r1)
> 0xc0040344 <+16>: mflr r0
> 0xc0040348 <+20>: stw r0,84(r1)
> 0xc004034c <+24>: mfcr r12
> Then I:
> modprobe kprobe_example func=do_fork offset=12
> ls
> 'ls' will never retrun. system freeze.
I'm not sure if x86 had a similar issue.
Masami, have any ideas to why this happened?
I don't have a PPC32 to test on, but I can try it out on my PPC64.
-- Steve
>
> I'm using toolchain from:http://www.denx.de/wiki/ELDK-5/WebHome
> powerpc-linux-gcc -v
> Using built-in specs.
> COLLECT_GCC=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/bin/powerpc-linux/powerpc-linux-gcc
> COLLECT_LTO_WRAPPER=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/libexec/powerpc-linux/gcc/powerpc-linux/4.5.1/lto-wrapper
> Target: powerpc-linux
> Configured with:
> /opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/work/i686-nativesdk-oesdk-linux/gcc-cross-canadian-powerpc-4.5.1-r4/gcc-4.5.1/configure
> --build=x86_64-linux --host=i686-oesdk-linux --target=powerpc-linux
> --prefix=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr
> --exec_prefix=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr
> --bindir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/bin/powerpc-linux
> --sbindir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/bin/powerpc-linux
> --libexecdir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/libexec/powerpc-linux
> --datadir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/share
> --sysconfdir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/etc
> --sharedstatedir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/com
> --localstatedir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/var
> --libdir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/lib/powerpc-linux
> --includedir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/include
> --oldincludedir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/include
> --infodir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/share/info
> --mandir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/share/man
> --with-libtool-sysroot=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/i686-oesdk-linux-nativesdk
> --with-gnu-ld --enable-shared --enable-languages=c,c++
> --enable-threads=posix --disable-multilib --enable-c99
> --enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch
> --program-prefix=powerpc-linux- --enable-lto --enable-libssp
> --disable-bootstrap --disable-libgomp --disable-libmudflap
> --enable-cheaders=c_global
> --with-local-prefix=/opt/eldk-5.0/powerpc/sysroots/powerpc-linux/usr
> --with-gxx-include-dir=/usr/include/c++
> --with-build-time-tools=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/x86_64-linux/usr/powerpc-linux/bin
> --with-sysroot=/opt/eldk-5.0/powerpc/sysroots/powerpc-linux
> --with-build-sysroot=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/powerpc
> --disable-libunwind-exceptions --disable-libssp --disable-libgomp
> --disable-libmudflap
> --with-mpfr=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/i686-oesdk-linux-nativesdk
> --with-mpc=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/i686-oesdk-linux-nativesdk
> --enable-__cxa_atexit
> Thread model: posix
> gcc version 4.5.1 (GCC)
>
>
> And kernel config is attached.
>
> BTW, I have made a patch to make kprobe_example set breakpoint easily,
> attached too.
>
> Thanks,
> Yong
>
^ permalink raw reply
* [BUG?]3.0-rc4+ftrace+kprobe: set kprobe at instruction 'stwu' lead to system crash/freeze
From: Yong Zhang @ 2011-06-24 9:21 UTC (permalink / raw)
To: linuxppc-dev, linux-kernel; +Cc: paulus, Steven Rostedt
[-- Attachment #1: Type: text/plain, Size: 3793 bytes --]
Hi,
When I use kprobe to do something, I found some wired thing.
When CONFIG_FUNCTION_TRACER is disabled:
(gdb) disassemble do_fork
Dump of assembler code for function do_fork:
0xc0037390 <+0>: mflr r0
0xc0037394 <+4>: stwu r1,-64(r1)
0xc0037398 <+8>: mfcr r12
0xc003739c <+12>: stmw r27,44(r1)
Then I:
modprobe kprobe_example func=do_fork offset=4
ls
Things works well.
But when CONFIG_FUNCTION_TRACER is enabled:
(gdb) disassemble do_fork
Dump of assembler code for function do_fork:
0xc0040334 <+0>: mflr r0
0xc0040338 <+4>: stw r0,4(r1)
0xc004033c <+8>: bl 0xc00109d4 <mcount>
0xc0040340 <+12>: stwu r1,-80(r1)
0xc0040344 <+16>: mflr r0
0xc0040348 <+20>: stw r0,84(r1)
0xc004034c <+24>: mfcr r12
Then I:
modprobe kprobe_example func=do_fork offset=12
ls
'ls' will never retrun. system freeze.
I'm using toolchain from:http://www.denx.de/wiki/ELDK-5/WebHome
powerpc-linux-gcc -v
Using built-in specs.
COLLECT_GCC=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/bin/powerpc-linux/powerpc-linux-gcc
COLLECT_LTO_WRAPPER=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/libexec/powerpc-linux/gcc/powerpc-linux/4.5.1/lto-wrapper
Target: powerpc-linux
Configured with:
/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/work/i686-nativesdk-oesdk-linux/gcc-cross-canadian-powerpc-4.5.1-r4/gcc-4.5.1/configure
--build=x86_64-linux --host=i686-oesdk-linux --target=powerpc-linux
--prefix=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr
--exec_prefix=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr
--bindir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/bin/powerpc-linux
--sbindir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/bin/powerpc-linux
--libexecdir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/libexec/powerpc-linux
--datadir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/share
--sysconfdir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/etc
--sharedstatedir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/com
--localstatedir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/var
--libdir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/lib/powerpc-linux
--includedir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/include
--oldincludedir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/include
--infodir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/share/info
--mandir=/opt/eldk-5.0/powerpc/sysroots/i686-oesdk-linux/usr/share/man
--with-libtool-sysroot=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/i686-oesdk-linux-nativesdk
--with-gnu-ld --enable-shared --enable-languages=c,c++
--enable-threads=posix --disable-multilib --enable-c99
--enable-long-long --enable-symvers=gnu --enable-libstdcxx-pch
--program-prefix=powerpc-linux- --enable-lto --enable-libssp
--disable-bootstrap --disable-libgomp --disable-libmudflap
--enable-cheaders=c_global
--with-local-prefix=/opt/eldk-5.0/powerpc/sysroots/powerpc-linux/usr
--with-gxx-include-dir=/usr/include/c++
--with-build-time-tools=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/x86_64-linux/usr/powerpc-linux/bin
--with-sysroot=/opt/eldk-5.0/powerpc/sysroots/powerpc-linux
--with-build-sysroot=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/powerpc
--disable-libunwind-exceptions --disable-libssp --disable-libgomp
--disable-libmudflap
--with-mpfr=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/i686-oesdk-linux-nativesdk
--with-mpc=/opt/poky/build/eldk-2011-05-20-5cde06e-powerpc/tmp/sysroots/i686-oesdk-linux-nativesdk
--enable-__cxa_atexit
Thread model: posix
gcc version 4.5.1 (GCC)
And kernel config is attached.
BTW, I have made a patch to make kprobe_example set breakpoint easily,
attached too.
Thanks,
Yong
--
Only stand for myself
[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 66076 bytes --]
#
# Automatically generated make config: don't edit
# Linux/powerpc 3.0.0-rc4 Kernel Configuration
#
# CONFIG_PPC64 is not set
#
# Processor support
#
# CONFIG_PPC_BOOK3S_32 is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_E500=y
# CONFIG_PPC_E500MC is not set
CONFIG_FSL_EMB_PERFMON=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
CONFIG_PPC_FSL_BOOK3E=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_32BIT=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_EPAPR_BOOT is not set
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_PPC_ADV_DEBUG_REGS=y
CONFIG_PPC_ADV_DEBUG_IACS=2
CONFIG_PPC_ADV_DEBUG_DACS=2
CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE="powerpc-linux-"
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_SPARSE_IRQ=y
#
# RCU Subsystem
#
# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
# CONFIG_TINY_PREEMPT_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y
# CONFIG_PPC_XICS is not set
# CONFIG_PPC_ICP_NATIVE is not set
# CONFIG_PPC_ICP_HV is not set
# CONFIG_PPC_ICS_RTAS is not set
#
# Platform support
#
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_FSL_SOC_BOOKE=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
CONFIG_MPC8536_DS=y
# CONFIG_MPC85xx_DS is not set
# CONFIG_MPC85xx_RDB is not set
# CONFIG_P1022_DS is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
# CONFIG_TQM8548 is not set
# CONFIG_TQM8555 is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_SBC8560 is not set
# CONFIG_P3041_DS is not set
# CONFIG_P4080_DS is not set
# CONFIG_P5020_DS is not set
# CONFIG_PPC_WSP is not set
CONFIG_KVM_GUEST=y
CONFIG_PPC_SMP_MUXED_IPI=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_MPIC_U3_HT_IRQS is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_P7_NAP is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_QUICC_ENGINE is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_MPC8xxx_GPIO is not set
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_PPC_4K_PAGES=y
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
CONFIG_FSL_PMC=y
CONFIG_FSL_LBC=y
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# CONFIG_RAPIDIO is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_SECURITY is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_NET_SCTPPROBE is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_DENALI is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_NAND_FSL_ELBC=y
# CONFIG_MTD_NAND_FSL_UPM is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
# CONFIG_PROC_DEVICETREE is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_SPI=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
# CONFIG_IWMC3200TOP is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_FSL=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_RAID is not set
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_MII=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_MV643XX_ETH is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_STMMAC_ETH is not set
# CONFIG_PCH_GBE is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_BNA is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
#
# CAIF transport drivers
#
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX3107 is not set
# CONFIG_SERIAL_MFD_HSU is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_INTEL_MID is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_FSL_ESPI is not set
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ALIM7101_WDT is not set
CONFIG_BOOKE_WDT=y
CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=38
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_ARVO is not set
# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_ROCCAT_KONEPLUS is not set
# CONFIG_HID_ROCCAT_KOVAPLUS is not set
# CONFIG_HID_ROCCAT_PYRA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_XPS_USB_HCD_XILINX is not set
CONFIG_USB_FSL_MPH_DR_OF=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_ATM is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_FSL_USB2=y
CONFIG_USB_FSL_USB2=m
# CONFIG_USB_GADGET_FUSB300 is not set
# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA_U2O is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_CI13XXX_PCI is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_EG20T is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_FSL_USB2_OTG is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_OF=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
# CONFIG_MMC_SDHCI_OF_HLWD is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_NFC_DEVICES is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_FSL_DMA=y
# CONFIG_TIMB_DMA is not set
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_XATTR is not set
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_ACL is not set
# CONFIG_CIFS_NFSD_EXPORT is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
# CONFIG_AVERAGE is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_TRACEPOINTS is not set
# CONFIG_SAMPLE_TRACE_EVENTS is not set
# CONFIG_SAMPLE_KOBJECT is not set
CONFIG_SAMPLE_KPROBES=m
CONFIG_SAMPLE_KRETPROBES=m
# CONFIG_SAMPLE_KFIFO is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_KGDB_KDB is not set
# CONFIG_TEST_KSTRTOX is not set
CONFIG_PPC_DISABLE_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
CONFIG_DEBUGGER=y
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
CONFIG_CRYPTO_DEV_TALITOS=y
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
[-- Attachment #3: patch.diff --]
[-- Type: text/x-patch, Size: 1138 bytes --]
diff --git a/samples/kprobes/kprobe_example.c b/samples/kprobes/kprobe_example.c
index ebf5e0c..f0ce4e6 100644
--- a/samples/kprobes/kprobe_example.c
+++ b/samples/kprobes/kprobe_example.c
@@ -13,11 +13,17 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kprobes.h>
+#include <linux/limits.h>
+
+static char func_name[NAME_MAX] = "do_fork";
+module_param_string(func, func_name, NAME_MAX, S_IRUGO);
+MODULE_PARM_DESC(func, "Function to kprobe");
+
+static unsigned int offset;
+module_param(offset, uint, S_IRUGO);
/* For each probe you need to allocate a kprobe structure */
-static struct kprobe kp = {
- .symbol_name = "do_fork",
-};
+static struct kprobe kp;
/* kprobe pre_handler: called just before the probed instruction is executed */
static int handler_pre(struct kprobe *p, struct pt_regs *regs)
@@ -76,6 +82,8 @@ static int handler_fault(struct kprobe *p, struct pt_regs *regs, int trapnr)
static int __init kprobe_init(void)
{
int ret;
+ kp.symbol_name = func_name;
+ kp.offset = offset;
kp.pre_handler = handler_pre;
kp.post_handler = handler_post;
kp.fault_handler = handler_fault;
^ permalink raw reply related
* Re: [RFC PATCH 0/1] BPF JIT for PPC64
From: Kumar Gala @ 2011-06-24 9:16 UTC (permalink / raw)
To: Matt Evans; +Cc: netdev, linuxppc-dev
In-Reply-To: <4E042867.5020902@ozlabs.org>
On Jun 24, 2011, at 1:02 AM, Matt Evans wrote:
> Hi,
>=20
>=20
> Inspired by Eric Dumazet's x86-64 compiler for Berkeley Packet Filter =
programs,
> I've written a BPF compiler for 64-bit PowerPC. Although it hasn't =
finished its
> strenuous testing regime, I'll have intermittent net access for a =
couple of
> weeks so thought I'd post it for feedback now and submit a 'proper' =
version when
> I'm back.
>=20
> It's a fairly simple code generator, following a similar structure to =
the x86
> version. The filter programs are an array of opcode/constant/branch =
destination
> structs, and can perform arithmetic/logical/comparison operations on =
two virtual
> registers A and X, loads from packet headers/data and accesses to =
local
> variables, M[]. Branching is also supported, but only forwards and =
only within
> the extent of the program.
>=20
> I would probably describe this as more of a "static template binary =
translator"
> than a "JIT" but have kept naming consistent :)
>=20
>=20
> Features include:
>=20
> - Filter code is generated as an ABI-compliant function, stackframe &
> prologue/epilogue if necessary.
>=20
> - Simple filters (e.g. RET nn) need no stackframe or save/restore code =
so
> generate into only an li/blr.
>=20
> - Local variables, M[], live in registers
>=20
> - I believe this supports all BPF opcodes, although "complicated" =
loads from
> negative packet offsets (e.g. SKF_LL_OFF) are not yet supported.
>=20
> Caveats include: :)
>=20
> - Packet data loads call out to simple helper functions (bpf_jit.S) =
which
> themselves may fall back to a trampoline to skb_copy_bits. I haven't =
decided
> whether (as per comments there) it would be better to generate the =
simple
> loads inline and only call out in the slow case.
>=20
> - Branches currently generate to "bcc 1f; b <far dest>; 1:" or
> "bcc <near dest> ; nop" so either case is the same size. Multiple =
passes of
> assembly are used (the first gets an idea of how big everything is =
and what
> features are required), the next generates everything at accurate =
size, the
> third generates everything with accurate branch destination =
addresses); I
> intend not to nop-pad the short branch case but changing code size =
may
> result in more passes and a 'settling-down period'. Kept simple for =
now.
>=20
> - Anyone running PPC64 little-endian is doing something both =
interesting and
> unsupported for this work :-) (There are some trivial endian =
assumptions.)
>=20
> Tested in-situ (tcpdump with varying complexity filters) and with a =
random BPF
> generator; I haven't verified loads from the fall back skb_copy_bits =
path. Bug
> reports/testing would be very welcome.
Would be nice to get PPC32 support as well.
- k=
^ permalink raw reply
* Re: [PATCH] fsl-diu-fb: remove check for pixel clock ranges
From: Paul Mundt @ 2011-06-24 8:10 UTC (permalink / raw)
To: Timur Tabi; +Cc: linuxppc-dev, linux-fbdev, agust, yorksun
In-Reply-To: <1308860426-17920-1-git-send-email-timur@freescale.com>
On Thu, Jun 23, 2011 at 03:20:26PM -0500, Timur Tabi wrote:
> The Freescale DIU framebuffer driver defines two constants, MIN_PIX_CLK and
> MAX_PIX_CLK, that are supposed to represent the lower and upper limits of
> the pixel clock. These values, however, are true only for one platform
> clock rate (533MHz) and only for the MPC8610. So the actual range for
> the pixel clock is chip-specific, which means the current values are almost
> always wrong. The chance of an out-of-range pixel clock being used are also
> remote.
>
> Rather than try to detect an out-of-range clock in the DIU driver, we depend
> on the board-specific pixel clock function (e.g. p1022ds_set_pixel_clock)
> to clamp the pixel clock to a supported value.
>
> Signed-off-by: Timur Tabi <timur@freescale.com>
Applied, thanks.
^ permalink raw reply
* [RFC PATCH 1/1] BPF JIT for PPC64
From: Matt Evans @ 2011-06-24 6:02 UTC (permalink / raw)
To: netdev, linuxppc-dev
arch/powerpc/Kconfig | 1 +
arch/powerpc/Makefile | 3 +-
arch/powerpc/include/asm/ppc-opcode.h | 40 ++
arch/powerpc/net/Makefile | 4 +
arch/powerpc/net/bpf_jit.S | 138 +++++++
arch/powerpc/net/bpf_jit.h | 226 +++++++++++
arch/powerpc/net/bpf_jit_comp.c | 697 +++++++++++++++++++++++++++++++++
7 files changed, 1108 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2729c66..39860fc 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -134,6 +134,7 @@ config PPC
select GENERIC_IRQ_SHOW_LEVEL
select HAVE_RCU_TABLE_FREE if SMP
select HAVE_SYSCALL_TRACEPOINTS
+ select HAVE_BPF_JIT if PPC64
config EARLY_PRINTK
bool
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index b7212b6..b94740f 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -154,7 +154,8 @@ core-y += arch/powerpc/kernel/ \
arch/powerpc/lib/ \
arch/powerpc/sysdev/ \
arch/powerpc/platforms/ \
- arch/powerpc/math-emu/
+ arch/powerpc/math-emu/ \
+ arch/powerpc/net/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
core-$(CONFIG_KVM) += arch/powerpc/kvm/
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index e472659..e980faa 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -71,6 +71,42 @@
#define PPC_INST_ERATSX 0x7c000126
#define PPC_INST_ERATSX_DOT 0x7c000127
+/* Misc instructions for BPF compiler */
+#define PPC_INST_LD 0xe8000000
+#define PPC_INST_LHZ 0xa0000000
+#define PPC_INST_LWZ 0x80000000
+#define PPC_INST_STD 0xf8000000
+#define PPC_INST_STDU 0xf8000001
+#define PPC_INST_MFLR 0x7c0802a6
+#define PPC_INST_MTLR 0x7c0803a6
+#define PPC_INST_CMPWI 0x2c000000
+#define PPC_INST_CMPDI 0x2c200000
+#define PPC_INST_CMPLW 0x7c000040
+#define PPC_INST_CMPLWI 0x28000000
+#define PPC_INST_ADDI 0x38000000
+#define PPC_INST_ADDIS 0x3c000000
+#define PPC_INST_ADD 0x7c000214
+#define PPC_INST_SUB 0x7c000050
+#define PPC_INST_BLR 0x4e800020
+#define PPC_INST_BLRL 0x4e800021
+#define PPC_INST_MULLW 0x7c0001d6
+#define PPC_INST_MULHWU 0x7c000016
+#define PPC_INST_MULLI 0x1c000000
+#define PPC_INST_DIVWU 0x7c0003d6
+#define PPC_INST_RLWINM 0x54000000
+#define PPC_INST_RLDICR 0x78000004
+#define PPC_INST_SLW 0x7c000030
+#define PPC_INST_SRW 0x7c000430
+#define PPC_INST_AND 0x7c000038
+#define PPC_INST_ANDDOT 0x7c000039
+#define PPC_INST_OR 0x7c000378
+#define PPC_INST_ANDI 0x70000000
+#define PPC_INST_ORI 0x60000000
+#define PPC_INST_ORIS 0x64000000
+#define PPC_INST_NEG 0x7c0000d0
+#define PPC_INST_BRANCH 0x48000000
+#define PPC_INST_BRANCH_COND 0x40800000
+
/* macros to insert fields into opcodes */
#define __PPC_RA(a) (((a) & 0x1f) << 16)
#define __PPC_RB(b) (((b) & 0x1f) << 11)
@@ -83,6 +119,10 @@
#define __PPC_T_TLB(t) (((t) & 0x3) << 21)
#define __PPC_WC(w) (((w) & 0x3) << 21)
#define __PPC_WS(w) (((w) & 0x1f) << 11)
+#define __PPC_SH(s) __PPC_WS(s)
+#define __PPC_MB(s) (((s) & 0x1f) << 6)
+#define __PPC_ME(s) (((s) & 0x1f) << 1)
+#define __PPC_BI(s) (((s) & 0x1f) << 16)
/*
* Only use the larx hint bit on 64bit CPUs. e500v1/v2 based CPUs will treat a
diff --git a/arch/powerpc/net/Makefile b/arch/powerpc/net/Makefile
new file mode 100644
index 0000000..90568c3
--- /dev/null
+++ b/arch/powerpc/net/Makefile
@@ -0,0 +1,4 @@
+#
+# Arch-specific network modules
+#
+obj-$(CONFIG_BPF_JIT) += bpf_jit.o bpf_jit_comp.o
diff --git a/arch/powerpc/net/bpf_jit.S b/arch/powerpc/net/bpf_jit.S
new file mode 100644
index 0000000..ce2225e
--- /dev/null
+++ b/arch/powerpc/net/bpf_jit.S
@@ -0,0 +1,138 @@
+/* bpf_jit.S: Packet/header access helper functions
+ * for PPC64 BPF compiler.
+ *
+ * Copyright 2011 Matt Evans <matt@ozlabs.org>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <asm/ppc_asm.h>
+#include "bpf_jit.h"
+
+/*
+ * All of these routines are called directly from generated code,
+ * whose register usage is:
+ *
+ * r3 skb
+ * r4,r5 A,X
+ * r6 *** address parameter to helper ***
+ * r7-r10 scratch
+ * r14 skb->data
+ * r15 skb headlen
+ * r16-31 M[]
+ */
+
+/*
+ * To consider: These helpers are so small it may be better to just
+ * generate them inline. They're out here for debug at the moment,
+ * but inline code can do the simple headlen check then branch
+ * directly to slow_path_XXX if required. (In fact, could load a spare
+ * GPR with slow_path_generic and pass size as an argument.)
+ *
+ * Technically, the "is addr < 0" check is unnecessary & slowing down
+ * the ABS path, as it's statically checked on generation.
+ */
+ .globl sk_load_word
+sk_load_word:
+ cmpdi r_addr, 0
+ blt bpf_error
+ /* Are we accessing past headlen? */
+ subi r_scratch1, r_HL, 4
+ cmpd r_scratch1, r_addr
+ blt bpf_slow_path_word
+ /* Nope, just hitting the header. cr0 here is eq or gt! */
+ lwzx r_A, r_D, r_addr
+ /* When big endian we don't need to byteswap. */
+ blr /* Return success, cr0 != LT */
+
+ .globl sk_load_half
+sk_load_half:
+ cmpdi r_addr, 0
+ blt bpf_error
+ subi r_scratch1, r_HL, 2
+ cmpd r_scratch1, r_addr
+ blt bpf_slow_path_half
+ lhzx r_A, r_D, r_addr
+ blr
+
+ .globl sk_load_byte
+sk_load_byte:
+ cmpdi r_addr, 0
+ blt bpf_error
+ cmpd r_HL, r_addr
+ ble bpf_slow_path_byte
+ lbzx r_A, r_D, r_addr
+ blr
+
+/*
+ * BPF_S_LDX_B_MSH: ldxb 4*([offset]&0xf)
+ * r_addr is the offset value, already known positive
+ */
+ .globl sk_load_byte_msh
+sk_load_byte_msh:
+ cmpd r_HL, r_addr
+ ble bpf_slow_path_byte_msh
+ lbzx r_X, r_D, r_addr
+ rlwinm r_X, r_X, 2, 32-4-2, 31-2
+ blr
+
+bpf_error:
+ /* Entered with cr0 = lt */
+ li r3, 0
+ /* Generated code will 'blt epilogue', returning 0. */
+ blr
+
+/* Call out to skb_copy_bits:
+ * We'll need to back up our volatile regs first; we have
+ * local variable space at r1+(BPF_PPC_STACK_BASIC).
+ * Allocate a new stack frame here to remain ABI-compliant in
+ * stashing LR.
+ */
+#define bpf_slow_path_common(SIZE) \
+ mflr r0; \
+ std r0, 16(r1); \
+ /* R3 goes in parameter space of caller's frame */ \
+ std r_skb, (BPF_PPC_STACKFRAME+48)(r1); \
+ std r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \
+ std r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \
+ stdu r1, -128(r1); \
+ /* R3 = r_skb, as passed */ \
+ mr r4, r_addr; \
+ addi r5, r1, 128+BPF_PPC_STACK_BASIC+(2*8); \
+ li r6, SIZE; \
+ bl skb_copy_bits; \
+ /* R3 = 0 on success */ \
+ addi r1, r1, 128; \
+ ld r0, 16(r1); \
+ ld r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \
+ ld r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \
+ mtlr r0; \
+ cmpdi r3, 0; \
+ blt bpf_error; /* cr0 = LT */ \
+ ld r_skb, (BPF_PPC_STACKFRAME+48)(r1); \
+ /* Great success! */
+
+bpf_slow_path_word:
+ bpf_slow_path_common(4)
+ /* Data value is on stack, and cr0 != LT */
+ lwz r_A, BPF_PPC_STACK_BASIC+(2*8)(r1)
+ blr
+
+bpf_slow_path_half:
+ bpf_slow_path_common(2)
+ lhz r_A, BPF_PPC_STACK_BASIC+(2*8)(r1)
+ blr
+
+bpf_slow_path_byte:
+ bpf_slow_path_common(1)
+ lbz r_A, BPF_PPC_STACK_BASIC+(2*8)(r1)
+ blr
+
+bpf_slow_path_byte_msh:
+ bpf_slow_path_common(1)
+ lbz r_X, BPF_PPC_STACK_BASIC+(2*8)(r1)
+ rlwinm r_X, r_X, 2, 32-4-2, 31-2
+ blr
diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
new file mode 100644
index 0000000..1fe54b9
--- /dev/null
+++ b/arch/powerpc/net/bpf_jit.h
@@ -0,0 +1,226 @@
+/* bpf_jit.h: BPF JIT compiler for PPC64
+ *
+ * Copyright 2011 Matt Evans <matt@ozlabs.org>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#ifndef _BPF_JIT_H
+#define _BPF_JIT_H
+
+#define BPF_PPC_STACK_LOCALS 32
+#define BPF_PPC_STACK_BASIC 112
+#define BPF_PPC_STACK_SAVE 128
+#define BPF_PPC_STACKFRAME (BPF_PPC_STACK_BASIC+BPF_PPC_STACK_LOCALS+ \
+ BPF_PPC_STACK_SAVE)
+
+/*
+ * Generated code register usage:
+ *
+ * As normal PPC C ABI (e.g. r1=sp, r2=TOC), with:
+ *
+ * skb r3 (Entry parameter)
+ * A register r4
+ * X register r5
+ * addr param r6
+ * r7-r10 scratch
+ * skb->data r14
+ * skb headlen r15 (skb->len - skb->data_len)
+ * m[0] r16
+ * m[...] ...
+ * m[15] r31
+ */
+#define r_skb 3
+#define r_ret 3
+#define r_A 4
+#define r_X 5
+#define r_addr 6
+#define r_scratch1 7
+#define r_D 14
+#define r_HL 15
+#define r_M 16
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Assembly helpers from arch/powerpc/net/bpf_jit.S:
+ */
+extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[];
+
+#define FUNCTION_DESCR_SIZE 24
+
+/*
+ * 16-bit immediate helper macros: HA() is for use with sign-extending instrs
+ * (e.g. LD, ADDI). If the bottom 16 bits is "-ve", add another bit into the
+ * top half to negate the effect (i.e. 0xffff + 1 = 0x(1)0000).
+ */
+#define IMM_H(i) ((uintptr_t)(i)>>16)
+#define IMM_HA(i) (((uintptr_t)(i)>>16) + \
+ (((uintptr_t)(i) & 0x8000) >> 15))
+#define IMM_L(i) ((uintptr_t)(i) & 0xffff)
+
+#define PLANT_INSTR(d, idx, instr) \
+ do { if (d) { (d)[idx] = instr; } idx++; } while (0)
+#define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr)
+
+#define PPC_NOP() EMIT(PPC_INST_NOP)
+#define PPC_BLR() EMIT(PPC_INST_BLR)
+#define PPC_BLRL() EMIT(PPC_INST_BLRL)
+#define PPC_MTLR(r) EMIT(PPC_INST_MTLR | __PPC_RT(r))
+#define PPC_ADDI(d, a, i) EMIT(PPC_INST_ADDI | __PPC_RT(d) | \
+ __PPC_RA(a) | IMM_L(i))
+#define PPC_MR(d, a) PPC_OR(d, a, a)
+#define PPC_LI(r, i) PPC_ADDI(r, 0, i)
+#define PPC_ADDIS(d, a, i) EMIT(PPC_INST_ADDIS | \
+ __PPC_RS(d) | __PPC_RA(a) | IMM_L(i))
+#define PPC_LIS(r, i) PPC_ADDIS(r, 0, i)
+#define PPC_STD(r, base, i) EMIT(PPC_INST_STD | __PPC_RS(r) | \
+ __PPC_RA(base) | ((i) & 0xfffc))
+
+#define PPC_LD(r, base, i) EMIT(PPC_INST_LD | __PPC_RT(r) | \
+ __PPC_RA(base) | IMM_L(i))
+#define PPC_LWZ(r, base, i) EMIT(PPC_INST_LWZ | __PPC_RT(r) | \
+ __PPC_RA(base) | IMM_L(i))
+#define PPC_LHZ(r, base, i) EMIT(PPC_INST_LHZ | __PPC_RT(r) | \
+ __PPC_RA(base) | IMM_L(i))
+/* Convenience helpers for the above with 'far' offsets: */
+#define PPC_LD_OFFS(r, base, i) do { if ((i) < 32768) PPC_LD(r, base, i); \
+ else { PPC_ADDIS(r, base, IMM_HA(i)); \
+ PPC_LD(r, r, IMM_L(i)); } } while(0)
+
+#define PPC_LWZ_OFFS(r, base, i) do { if ((i) < 32768) PPC_LWZ(r, base, i); \
+ else { PPC_ADDIS(r, base, IMM_HA(i)); \
+ PPC_LWZ(r, r, IMM_L(i)); } } while(0)
+
+#define PPC_LHZ_OFFS(r, base, i) do { if ((i) < 32768) PPC_LHZ(r, base, i); \
+ else { PPC_ADDIS(r, base, IMM_HA(i)); \
+ PPC_LHZ(r, r, IMM_L(i)); } } while(0)
+
+#define PPC_CMPWI(a, i) EMIT(PPC_INST_CMPWI | __PPC_RA(a) | IMM_L(i))
+#define PPC_CMPDI(a, i) EMIT(PPC_INST_CMPDI | __PPC_RA(a) | IMM_L(i))
+#define PPC_CMPLWI(a, i) EMIT(PPC_INST_CMPLWI | __PPC_RA(a) | IMM_L(i))
+#define PPC_CMPLW(a, b) EMIT(PPC_INST_CMPLW | __PPC_RA(a) | __PPC_RB(b))
+
+#define PPC_SUB(d, a, b) EMIT(PPC_INST_SUB | __PPC_RT(d) | \
+ __PPC_RB(a) | __PPC_RA(b))
+#define PPC_ADD(d, a, b) EMIT(PPC_INST_ADD | __PPC_RT(d) | \
+ __PPC_RA(a) | __PPC_RB(b))
+#define PPC_MUL(d, a, b) EMIT(PPC_INST_MULLW | __PPC_RT(d) | \
+ __PPC_RA(a) | __PPC_RB(b))
+#define PPC_MULHWU(d, a, b) EMIT(PPC_INST_MULHWU | __PPC_RT(d) | \
+ __PPC_RA(a) | __PPC_RB(b))
+#define PPC_MULI(d, a, i) EMIT(PPC_INST_MULLI | __PPC_RT(d) | \
+ __PPC_RA(a) | IMM_L(i))
+#define PPC_DIVWU(d, a, b) EMIT(PPC_INST_DIVWU | __PPC_RT(d) | \
+ __PPC_RA(a) | __PPC_RB(b))
+#define PPC_AND(d, a, b) EMIT(PPC_INST_AND | __PPC_RA(d) | \
+ __PPC_RS(a) | __PPC_RB(b))
+#define PPC_ANDI(d, a, i) EMIT(PPC_INST_ANDI | __PPC_RA(d) | \
+ __PPC_RS(a) | IMM_L(i))
+#define PPC_AND_DOT(d, a, b) EMIT(PPC_INST_ANDDOT | __PPC_RA(d) | \
+ __PPC_RS(a) | __PPC_RB(b))
+#define PPC_OR(d, a, b) EMIT(PPC_INST_OR | __PPC_RA(d) | \
+ __PPC_RS(a) | __PPC_RB(b))
+#define PPC_ORI(d, a, i) EMIT(PPC_INST_ORI | __PPC_RA(d) | \
+ __PPC_RS(a) | IMM_L(i))
+#define PPC_ORIS(d, a, i) EMIT(PPC_INST_ORIS | __PPC_RA(d) | \
+ __PPC_RS(a) | IMM_L(i))
+#define PPC_SLW(d, a, s) EMIT(PPC_INST_SLW | __PPC_RA(d) | \
+ __PPC_RS(a) | __PPC_RB(s))
+#define PPC_SRW(d, a, s) EMIT(PPC_INST_SRW | __PPC_RA(d) | \
+ __PPC_RS(a) | __PPC_RB(s))
+/* slwi = rlwinm Rx, Ry, n, 0, 31-n */
+#define PPC_SLWI(d, a, i) EMIT(PPC_INST_RLWINM | __PPC_RA(d) | \
+ __PPC_RS(a) | __PPC_SH(i) | \
+ __PPC_MB(0) | __PPC_ME(31-(i)))
+/* srwi = rlwinm Rx, Ry, 32-n, n, 31 */
+#define PPC_SRWI(d, a, i) EMIT(PPC_INST_RLWINM | __PPC_RA(d) | \
+ __PPC_RS(a) | __PPC_SH(32-(i)) | \
+ __PPC_MB(i) | __PPC_ME(31))
+/* sldi = rldicr Rx, Ry, n, 63-n */
+#define PPC_SLDI(d, a, i) EMIT(PPC_INST_RLDICR | __PPC_RA(d) | \
+ __PPC_RS(a) | __PPC_SH(i) | \
+ __PPC_MB(63-(i)) | (((i) & 0x20) >> 4))
+#define PPC_NEG(d, a) EMIT(PPC_INST_NEG | __PPC_RT(d) | __PPC_RA(a))
+
+/* Long jump; (unconditional 'branch') */
+#define PPC_JMP(dest) EMIT(PPC_INST_BRANCH | \
+ (((dest) - (ctx->idx * 4)) & 0x03fffffc))
+/* "cond" here covers BO:BI fields. */
+#define PPC_BCC_SHORT(cond, dest) EMIT(PPC_INST_BRANCH_COND | \
+ (((cond) & 0x3ff) << 16) | \
+ (((dest) - (ctx->idx * 4)) & \
+ 0xfffc))
+#define PPC_LI32(d, i) do { PPC_LI(d, IMM_L(i)); \
+ if ((u32)(uintptr_t)(i) >= 32768) { \
+ PPC_ADDIS(d, d, IMM_HA(i)); \
+ } } while(0)
+#define PPC_LI64(d, i) do { \
+ if (!((uintptr_t)(i) & 0xffffffff00000000ULL)) \
+ PPC_LI32(d, i); \
+ else { \
+ PPC_LIS(d, ((uintptr_t)(i) >> 48)); \
+ if ((uintptr_t)(i) & 0x0000ffff00000000ULL) \
+ PPC_ORI(d, d, \
+ ((uintptr_t)(i) >> 32) & 0xffff); \
+ PPC_SLDI(d, d, 32); \
+ if ((uintptr_t)(i) & 0x00000000ffff0000ULL) \
+ PPC_ORIS(d, d, \
+ ((uintptr_t)(i) >> 16) & 0xffff); \
+ if ((uintptr_t)(i) & 0x000000000000ffffULL) \
+ PPC_ORI(d, d, (uintptr_t)(i) & 0xffff); \
+ } } while (0);
+
+static inline bool is_nearbranch(int offset)
+{
+ return (offset < 32768) && (offset >= -32768);
+}
+
+/*
+ * The fly in the ointment of code size changing from pass to pass is
+ * avoided by padding the short branch case with a NOP. If code size differs
+ * with different branch reaches we will have the issue of code moving from
+ * one pass to the next and will need a few passes to converge on a stable
+ * state.
+ */
+#define PPC_BCC(cond, dest) do { \
+ if (is_nearbranch((dest) - (ctx->idx * 4))) { \
+ PPC_BCC_SHORT(cond, dest); \
+ PPC_NOP(); \
+ } else { \
+ /* Flip the 'T or F' bit to invert comparison */ \
+ PPC_BCC_SHORT(cond ^ COND_CMP_TRUE, (ctx->idx+2)*4); \
+ PPC_JMP(dest); \
+ } } while(0)
+
+/* To create a branch condition, select a bit of cr0... */
+#define CR0_LT 0
+#define CR0_GT 1
+#define CR0_EQ 2
+/* ...and modify BO[3] */
+#define COND_CMP_TRUE 0x100
+#define COND_CMP_FALSE 0x000
+/* Together, they make all required comparisons: */
+#define COND_GT (CR0_GT | COND_CMP_TRUE)
+#define COND_GE (CR0_LT | COND_CMP_FALSE)
+#define COND_EQ (CR0_EQ | COND_CMP_TRUE)
+#define COND_NE (CR0_EQ | COND_CMP_FALSE)
+#define COND_LT (CR0_LT | COND_CMP_TRUE)
+
+#define SEEN_DATAREF 0x10000 /* might call external helpers */
+#define SEEN_XREG 0x20000 /* X reg is used */
+#define SEEN_MEM 0x40000 /* SEEN_MEM+(1<<n) = use mem[n] for temporary
+ * storage */
+#define SEEN_MEM_MSK 0x0ffff
+
+struct codegen_context {
+ unsigned int seen;
+ unsigned int idx;
+ int pc_ret0; /* bpf index of first RET #0 instruction (if any) */
+};
+
+#endif
+
+#endif
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
new file mode 100644
index 0000000..8a76350
--- /dev/null
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -0,0 +1,697 @@
+/* bpf_jit_comp.c: BPF JIT compiler for PPC64
+ *
+ * Copyright 2011 Matt Evans <matt@ozlabs.org>, IBM Corporation
+ *
+ * Based on the x86 BPF compiler, by Eric Dumazet (eric.dumazet@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/moduleloader.h>
+#include <asm/cacheflush.h>
+#include <linux/netdevice.h>
+#include <linux/filter.h>
+#include "bpf_jit.h"
+
+#ifndef __BIG_ENDIAN
+/* There are endianness assumptions herein. */
+#error "Little-endian PPC not supported in BPF compiler"
+#endif
+
+int bpf_jit_enable __read_mostly;
+
+
+static inline void bpf_flush_icache(void *start, void *end)
+{
+ smp_wmb();
+ flush_icache_range((unsigned long)start, (unsigned long)end);
+}
+
+static void bpf_jit_build_prologue(struct sk_filter *fp, u32 *image,
+ struct codegen_context *ctx)
+{
+ int i;
+ const struct sock_filter *filter = fp->insns;
+
+ if (ctx->seen & (SEEN_MEM | SEEN_DATAREF)) {
+ /* Make stackframe */
+ if (ctx->seen & SEEN_DATAREF) {
+ /* If we call any helpers (for loads), save LR */
+ EMIT(PPC_INST_MFLR | __PPC_RT(0));
+ PPC_STD(0, 1, 16);
+
+ /* Back up non-volatile regs. */
+ PPC_STD(r_D, 1, -(8*(32-r_D)));
+ PPC_STD(r_HL, 1, -(8*(32-r_HL)));
+ }
+ if (ctx->seen & SEEN_MEM) {
+ /*
+ * Conditionally save regs r15-r31 as some will be used
+ * for M[] data.
+ */
+ for (i = 0; i < 16; i++) {
+ if (ctx->seen & (1 << i))
+ PPC_STD(r_M + i, 1, -128 + (8*i));
+ }
+ }
+ EMIT(PPC_INST_STDU | __PPC_RS(1) | __PPC_RA(1) |
+ (-BPF_PPC_STACKFRAME & 0xfffc));
+ }
+
+ if (ctx->seen & SEEN_DATAREF) {
+ /*
+ * If this filter needs to access skb data,
+ * prepare r_D and r_HL:
+ * r_HL = skb->len - skb->data_len
+ * r_D = skb->data
+ */
+ PPC_LWZ_OFFS(r_scratch1, r_skb, offsetof(struct sk_buff,
+ data_len));
+ PPC_LWZ_OFFS(r_HL, r_skb, offsetof(struct sk_buff, len));
+ PPC_SUB(r_HL, r_HL, r_scratch1);
+ PPC_LD_OFFS(r_D, r_skb, offsetof(struct sk_buff, data));
+ }
+
+ if (ctx->seen & SEEN_XREG) {
+ /*
+ * TODO: Could also detect whether first instr. sets X and
+ * avoid this (as below, with A).
+ */
+ PPC_LI(r_X, 0);
+ }
+
+ switch (filter[0].code) {
+ case BPF_S_RET_K:
+ case BPF_S_LD_W_LEN:
+ case BPF_S_ANC_PROTOCOL:
+ case BPF_S_ANC_IFINDEX:
+ case BPF_S_ANC_MARK:
+ case BPF_S_ANC_RXHASH:
+ case BPF_S_ANC_CPU:
+ case BPF_S_ANC_QUEUE:
+ case BPF_S_LD_W_ABS:
+ case BPF_S_LD_H_ABS:
+ case BPF_S_LD_B_ABS:
+ /* first instruction sets A register (or is RET 'constant') */
+ break;
+ default:
+ /* make sure we dont leak kernel information to user */
+ PPC_LI(r_A, 0);
+ }
+}
+
+static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
+{
+ int i;
+
+ if (ctx->seen & (SEEN_MEM | SEEN_DATAREF)) {
+ PPC_ADDI(1, 1, BPF_PPC_STACKFRAME);
+ if (ctx->seen & SEEN_DATAREF) {
+ PPC_LD(0, 1, 16);
+ PPC_MTLR(0);
+ PPC_LD(r_D, 1, -(8*(32-r_D)));
+ PPC_LD(r_HL, 1, -(8*(32-r_HL)));
+ }
+ if (ctx->seen & SEEN_MEM) {
+ /* Restore any saved non-vol registers */
+ for (i = 0; i < 16; i++) {
+ if (ctx->seen & (1 << i))
+ PPC_LD(r_M + i, 1, -128 + (8*i));
+ }
+ }
+ }
+ /* The RETs have left a return value in R3. */
+
+ PPC_BLR();
+}
+
+/* Assemble the body code between the prologue & epilogue. */
+static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
+ struct codegen_context *ctx,
+ unsigned int *addrs)
+{
+ const struct sock_filter *filter = fp->insns;
+ int flen = fp->len;
+ u8 *func;
+ unsigned int true_cond;
+ int i;
+
+ /* Start of epilogue code */
+ unsigned int exit_addr = addrs[flen];
+
+ for (i = 0; i < flen; i++) {
+ unsigned int K = filter[i].k;
+
+ /*
+ * addrs[] maps a BPF bytecode address into a real offset from
+ * the start of the body code.
+ */
+ addrs[i] = ctx->idx * 4;
+
+ switch (filter[i].code) {
+ /*** ALU ops ***/
+ case BPF_S_ALU_ADD_X: /* A += X; */
+ ctx->seen |= SEEN_XREG;
+ PPC_ADD(r_A, r_A, r_X);
+ break;
+ case BPF_S_ALU_ADD_K: /* A += K; */
+ if (!K)
+ break;
+ if (K < 32768)
+ PPC_ADDI(r_A, r_A, K);
+ else
+ PPC_ADDI(r_A, r_A, IMM_L(K));
+ PPC_ADDIS(r_A, r_A, IMM_HA(K));
+ break;
+ case BPF_S_ALU_SUB_X: /* A -= X; */
+ ctx->seen |= SEEN_XREG;
+ PPC_SUB(r_A, r_A, r_X);
+ break;
+ case BPF_S_ALU_SUB_K: /* A -= K */
+ if (!K)
+ break;
+ if (K < 32768)
+ PPC_ADDI(r_A, r_A, -K);
+ else
+ PPC_ADDI(r_A, r_A, IMM_L(-K));
+ PPC_ADDIS(r_A, r_A, IMM_HA(-K));
+ break;
+ case BPF_S_ALU_MUL_X: /* A *= X; */
+ ctx->seen |= SEEN_XREG;
+ PPC_MUL(r_A, r_A, r_X);
+ break;
+ case BPF_S_ALU_MUL_K: /* A *= K */
+ if (K < 32768)
+ PPC_MULI(r_A, r_A, K);
+ else {
+ PPC_LI32(r_scratch1, K);
+ PPC_MUL(r_A, r_A, r_scratch1);
+ }
+ break;
+ case BPF_S_ALU_DIV_X: /* A /= X; */
+ ctx->seen |= SEEN_XREG;
+ PPC_CMPWI(r_X, 0);
+ if (ctx->pc_ret0 != -1) {
+ PPC_BCC(COND_EQ, addrs[ctx->pc_ret0]);
+ } else {
+ /*
+ * Exit, returning 0; first pass hits here
+ * (longer worst-case code size).
+ */
+ PPC_BCC_SHORT(COND_NE, (ctx->idx*4)+12);
+ PPC_LI(r_ret, 0);
+ PPC_JMP(exit_addr);
+ }
+ PPC_DIVWU(r_A, r_A, r_X);
+ break;
+ case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K); */
+ PPC_LI32(r_scratch1, K);
+ /* Top 32 bits of 64bit result -> A */
+ PPC_MULHWU(r_A, r_A, r_scratch1);
+ break;
+ case BPF_S_ALU_AND_X:
+ ctx->seen |= SEEN_XREG;
+ PPC_AND(r_A, r_A, r_X);
+ break;
+ case BPF_S_ALU_AND_K:
+ if (!IMM_H(K))
+ PPC_ANDI(r_A, r_A, K);
+ else {
+ PPC_LI32(r_scratch1, K);
+ PPC_AND(r_A, r_A, r_scratch1);
+ }
+ break;
+ case BPF_S_ALU_OR_X:
+ ctx->seen |= SEEN_XREG;
+ PPC_OR(r_A, r_A, r_X);
+ break;
+ case BPF_S_ALU_OR_K:
+ if (IMM_L(K))
+ PPC_ORI(r_A, r_A, IMM_L(K));
+ if (K >= 65536)
+ PPC_ORIS(r_A, r_A, IMM_H(K));
+ break;
+ case BPF_S_ALU_LSH_X: /* A <<= X; */
+ ctx->seen |= SEEN_XREG;
+ PPC_SLW(r_A, r_A, r_X);
+ break;
+ case BPF_S_ALU_LSH_K:
+ if (K == 0)
+ break;
+ else
+ PPC_SLWI(r_A, r_A, K);
+ break;
+ case BPF_S_ALU_RSH_X: /* A >>= X; */
+ ctx->seen |= SEEN_XREG;
+ PPC_SRW(r_A, r_A, r_X);
+ break;
+ case BPF_S_ALU_RSH_K: /* A >>= K; */
+ if (K == 0)
+ break;
+ else
+ PPC_SRWI(r_A, r_A, K);
+ break;
+ case BPF_S_ALU_NEG:
+ PPC_NEG(r_A, r_A);
+ break;
+ case BPF_S_RET_K:
+ PPC_LI32(r_ret, K);
+ if (!K) {
+ if (ctx->pc_ret0 == -1)
+ ctx->pc_ret0 = i;
+ }
+ /*
+ * If this isn't the very last instruction, branch to
+ * the epilogue if we've stuff to clean up. Otherwise,
+ * if there's nothing to tidy, just return. If we /are/
+ * the last instruction, we're about to fall through to
+ * the epilogue to return.
+ */
+ if (i != flen - 1) {
+ /*
+ * Note: 'seen' is properly valid only on pass
+ * #2. Both parts of this conditional are the
+ * same instruction size though, meaning the
+ * first pass will still correctly determine the
+ * code size/addresses.
+ */
+ if (ctx->seen)
+ PPC_JMP(exit_addr);
+ else
+ PPC_BLR();
+ }
+ break;
+ case BPF_S_RET_A:
+ PPC_MR(r_ret, r_A);
+ if (i != flen - 1) {
+ if (ctx->seen)
+ PPC_JMP(exit_addr);
+ else
+ PPC_BLR();
+ }
+ break;
+ case BPF_S_MISC_TAX: /* X = A */
+ ctx->seen |= SEEN_XREG;
+ PPC_MR(r_X, r_A);
+ break;
+ case BPF_S_MISC_TXA: /* A = X */
+ ctx->seen |= SEEN_XREG;
+ PPC_MR(r_A, r_X);
+ break;
+
+ /*** Constant loads/M[] access ***/
+ case BPF_S_LD_IMM: /* A = K */
+ PPC_LI32(r_A, K);
+ break;
+ case BPF_S_LDX_IMM: /* X = K */
+ ctx->seen |= SEEN_XREG;
+ PPC_LI32(r_X, K);
+ break;
+ case BPF_S_LD_MEM: /* A = mem[K] */
+ PPC_MR(r_A, r_M + (K & 0xf));
+ ctx->seen |= SEEN_MEM | (1<<(K & 0xf));
+ break;
+ case BPF_S_LDX_MEM: /* X = mem[K] */
+ PPC_MR(r_X, r_M + (K & 0xf));
+ ctx->seen |= SEEN_XREG | SEEN_MEM | (1<<(K & 0xf));
+ break;
+ case BPF_S_ST: /* mem[K] = A */
+ PPC_MR(r_M + (K & 0xf), r_A);
+ ctx->seen |= SEEN_MEM | (1<<(K & 0xf));
+ break;
+ case BPF_S_STX: /* mem[K] = X */
+ PPC_MR(r_M + (K & 0xf), r_X);
+ ctx->seen |= SEEN_XREG | SEEN_MEM | (1<<(K & 0xf));
+ break;
+ case BPF_S_LD_W_LEN: /* A = skb->len; */
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
+ PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff, len));
+ break;
+ case BPF_S_LDX_W_LEN: /* X = skb->len; */
+ ctx->seen |= SEEN_XREG;
+ PPC_LWZ_OFFS(r_X, r_skb, offsetof(struct sk_buff, len));
+ break;
+
+ /*** Ancillary info loads ***/
+
+ /* None of the BPF_S_ANC* codes appear to be passed by
+ * sk_chk_filter(). The interpreter and the x86 BPF
+ * compiler implement them so we do too -- they may be
+ * planted in future.
+ */
+ case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol); */
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
+ protocol) != 2);
+ PPC_LHZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
+ protocol));
+ /* ntohs is a NOP with BE loads. */
+ break;
+ case BPF_S_ANC_IFINDEX:
+ PPC_LD_OFFS(r_scratch1, r_skb, offsetof(struct sk_buff,
+ dev));
+ PPC_CMPDI(r_scratch1, 0);
+ if (ctx->pc_ret0 != -1) {
+ PPC_BCC(COND_EQ, addrs[ctx->pc_ret0]);
+ } else {
+ /* Exit, returning 0; first pass hits here. */
+ PPC_BCC_SHORT(COND_NE, (ctx->idx*4)+12);
+ PPC_LI(r_ret, 0);
+ PPC_JMP(exit_addr);
+ }
+ BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
+ ifindex) != 4);
+ PPC_LWZ_OFFS(r_A, r_scratch1,
+ offsetof(struct net_device, ifindex));
+ break;
+ case BPF_S_ANC_MARK:
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
+ PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
+ mark));
+ break;
+ case BPF_S_ANC_RXHASH:
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, rxhash) != 4);
+ PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
+ rxhash));
+ break;
+ case BPF_S_ANC_QUEUE:
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
+ queue_mapping) != 2);
+ PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff,
+ queue_mapping));
+ break;
+ case BPF_S_ANC_CPU:
+#ifdef CONFIG_SMP
+ /*
+ * PACA ptr is r13:
+ * raw_smp_processor_id() = local_paca->paca_index
+ */
+ PPC_LHZ_OFFS(r_A, 13,
+ offsetof(struct paca_struct, paca_index));
+#else
+ PPC_LI(r_A, 0);
+#endif
+ break;
+
+ /*** Absolute loads from packet header/data ***/
+ case BPF_S_LD_W_ABS:
+ func = sk_load_word;
+ goto common_load;
+ case BPF_S_LD_H_ABS:
+ func = sk_load_half;
+ goto common_load;
+ case BPF_S_LD_B_ABS:
+ func = sk_load_byte;
+ common_load:
+ /*
+ * Load from [K]. Reference with the (negative)
+ * SKF_NET_OFF/SKF_LL_OFF offsets is unsupported.
+ */
+ ctx->seen |= SEEN_DATAREF;
+ if ((int)K < 0)
+ return -ENOTSUPP;
+ PPC_LI64(r_scratch1, func);
+ PPC_MTLR(r_scratch1);
+ PPC_LI32(r_addr, K);
+ PPC_BLRL();
+ /*
+ * Helper returns 'lt' condition on error, and an
+ * appropriate return value in r3
+ */
+ PPC_BCC(COND_LT, exit_addr);
+ break;
+
+ /*** Indirect loads from packet header/data ***/
+ case BPF_S_LD_W_IND:
+ func = sk_load_word;
+ goto common_load_ind;
+ case BPF_S_LD_H_IND:
+ func = sk_load_half;
+ goto common_load_ind;
+ case BPF_S_LD_B_IND:
+ func = sk_load_byte;
+ common_load_ind:
+ /*
+ * Load from [X + K]. Negative offsets are tested for
+ * in the helper functions, and result in a 'ret 0'.
+ */
+ ctx->seen |= SEEN_DATAREF | SEEN_XREG;
+ PPC_LI64(r_scratch1, func);
+ PPC_MTLR(r_scratch1);
+ PPC_ADDI(r_addr, r_X, IMM_L(K));
+ if (K >= 32768)
+ PPC_ADDIS(r_addr, r_addr, IMM_HA(K));
+ PPC_BLRL();
+ /* If error, cr0.LT set */
+ PPC_BCC(COND_LT, exit_addr);
+ break;
+
+ case BPF_S_LDX_B_MSH:
+ /*
+ * x86 version drops packet (RET 0) when K<0, whereas
+ * interpreter does allow K<0 (__load_pointer, special
+ * ancillary data).
+ */
+ ctx->seen |= SEEN_XREG;
+ func = sk_load_byte_msh;
+ goto common_load;
+ break;
+
+ /*** Jump and branches ***/
+ case BPF_S_JMP_JA:
+ PPC_JMP(addrs[i + K]);
+ break;
+
+ case BPF_S_JMP_JGT_K:
+ case BPF_S_JMP_JGT_X:
+ true_cond = COND_GT;
+ goto cond_branch;
+ case BPF_S_JMP_JGE_K:
+ case BPF_S_JMP_JGE_X:
+ true_cond = COND_GE;
+ goto cond_branch;
+ case BPF_S_JMP_JEQ_K:
+ case BPF_S_JMP_JEQ_X:
+ true_cond = COND_EQ;
+ goto cond_branch;
+ case BPF_S_JMP_JSET_K:
+ case BPF_S_JMP_JSET_X:
+ true_cond = COND_NE;
+ /* Fall through */
+ cond_branch:
+ /* same targets, can avoid doing the test :) */
+ if (filter[i].jt == filter[i].jf) {
+ if (filter[i].jt > 0)
+ PPC_JMP(addrs[i + 1 + filter[i].jt]);
+ break;
+ }
+
+ switch (filter[i].code) {
+ case BPF_S_JMP_JGT_X:
+ case BPF_S_JMP_JGE_X:
+ case BPF_S_JMP_JEQ_X:
+ ctx->seen |= SEEN_XREG;
+ PPC_CMPLW(r_A, r_X);
+ break;
+ case BPF_S_JMP_JSET_X:
+ ctx->seen |= SEEN_XREG;
+ PPC_AND_DOT(r_scratch1, r_A, r_X);
+ break;
+ case BPF_S_JMP_JEQ_K:
+ case BPF_S_JMP_JGT_K:
+ case BPF_S_JMP_JGE_K:
+ if (K < 32768)
+ PPC_CMPLWI(r_A, K);
+ else {
+ PPC_LI32(r_scratch1, K);
+ PPC_CMPLW(r_A, r_scratch1);
+ }
+ break;
+ case BPF_S_JMP_JSET_K:
+ if (K < 32768)
+ /* PPC_ANDI is /only/ dot-form */
+ PPC_ANDI(r_scratch1, r_A, K);
+ else {
+ PPC_LI32(r_scratch1, K);
+ PPC_AND_DOT(r_scratch1, r_A,
+ r_scratch1);
+ }
+ break;
+ }
+ /* Sometimes branches are constructed "backward", with
+ * the false path being the branch and true path being
+ * a fallthrough to the next instruction.
+ */
+ if (filter[i].jt == 0)
+ /* Swap the sense of the branch */
+ PPC_BCC(true_cond ^ COND_CMP_TRUE,
+ addrs[i + 1 + filter[i].jf]);
+ else {
+ PPC_BCC(true_cond, addrs[i + 1 + filter[i].jt]);
+ if (filter[i].jf != 0)
+ PPC_JMP(addrs[i + 1 + filter[i].jf]);
+ }
+ break;
+ default:
+ /* The filter contains something cruel & unusual.
+ * We don't handle it, but also there shouldn't be
+ * anything missing from our list.
+ */
+ pr_err("BPF filter opcode %04x (@%d) unsupported\n",
+ filter[i].code, i);
+ return -ENOTSUPP;
+ }
+
+ }
+ /* Set end-of-body-code address for exit. */
+ addrs[i] = ctx->idx * 4;
+
+ return 0;
+}
+
+void bpf_jit_compile(struct sk_filter *fp)
+{
+ unsigned int proglen;
+ unsigned int alloclen;
+ u32 *image = NULL;
+ u32 *code_base;
+ unsigned int *addrs;
+ struct codegen_context cgctx;
+ int pass;
+ int flen = fp->len;
+
+ if (!bpf_jit_enable)
+ return;
+
+ addrs = kzalloc((flen+1) * sizeof(*addrs), GFP_KERNEL);
+ if (addrs == NULL)
+ return;
+
+ /*
+ * There are multiple assembly passes as the generated code will change
+ * size as it settles down, figuring out the max branch offsets/exit
+ * paths required.
+ *
+ * The range of standard conditional branches is +/- 32Kbytes. Since
+ * BPF_MAXINSNS = 4096, we can only jump from (worst case) start to
+ * finish with 8 bytes/instruction. Not feasible, so long jumps are
+ * used, distinct from short branches.
+ *
+ * Current:
+ *
+ * For now, both branch types assemble to 2 words (short branches padded
+ * with a NOP); this is inefficient, but assembly will always complete
+ * after exactly 3 passes:
+ *
+ * First pass: No code buffer; Program is "faux-generated" -- no code
+ * emitted but maximum size of output determined (and addrs[] filled
+ * in). Also, we note whether we use M[], whether we use skb data, etc.
+ * All generation choices assumed to be 'worst-case', e.g. branches all
+ * far (2 instructions), return path code reduction not available, etc.
+ *
+ * Second pass: Code buffer allocated with size determined previously.
+ * Prologue generated to support features we have seen used. Exit paths
+ * determined and addrs[] is filled in again, as code may be slightly
+ * smaller as a result.
+ *
+ * Third pass: Code generated 'for real', and branch destinations
+ * determined from now-accurate addrs[] map.
+ *
+ * Ideal:
+ *
+ * If we optimise this, near branches will be shorter. On the
+ * first assembly pass, we should err on the side of caution and
+ * generate the biggest code. On subsequent passes, branches will be
+ * generated short or long and code size will reduce. With smaller
+ * code, more branches may fall into the short category, and code will
+ * reduce more.
+ *
+ * Finally, if we see one pass generate code the same size as the
+ * previous pass we have converged and should now generate code for
+ * real. Allocating at the end will also save the memory that would
+ * otherwise be wasted by the (small) current code shrinkage.
+ * Preferably, we should do a small number of passes (e.g. 5) and if we
+ * haven't converged by then, get impatient and force code to generate
+ * as-is, even if the odd branch would be left long. The chances of a
+ * long jump are tiny with all but the most enormous of BPF filter
+ * inputs, so we should usually converge on the third pass.
+ */
+
+ cgctx.idx = 0;
+ cgctx.seen = 0;
+ cgctx.pc_ret0 = -1;
+ /* Scouting faux-generate pass 0 */
+ if (bpf_jit_build_body(fp, 0, &cgctx, addrs))
+ /* We hit something illegal or unsupported. */
+ goto out;
+
+ /*
+ * Pretend to build prologue, given the features we've seen. This will
+ * update ctgtx.idx as it pretends to output instructions, then we can
+ * calculate total size from idx.
+ */
+ bpf_jit_build_prologue(fp, 0, &cgctx);
+ bpf_jit_build_epilogue(0, &cgctx);
+
+ proglen = cgctx.idx * 4;
+ alloclen = proglen + FUNCTION_DESCR_SIZE;
+ image = module_alloc(max_t(unsigned int, alloclen,
+ sizeof(struct work_struct)));
+ if (!image)
+ goto out;
+
+ code_base = image + (FUNCTION_DESCR_SIZE/4);
+
+ /* Code generation passes 1-2 */
+ for (pass = 1; pass < 3; pass++) {
+ /* Now build the prologue, body code & epilogue for real. */
+ cgctx.idx = 0;
+ bpf_jit_build_prologue(fp, code_base, &cgctx);
+ bpf_jit_build_body(fp, code_base, &cgctx, addrs);
+ bpf_jit_build_epilogue(code_base, &cgctx);
+
+ if (bpf_jit_enable > 1)
+ pr_info("Pass %d: shrink = %d, seen = 0x%x\n", pass,
+ proglen - (cgctx.idx * 4), cgctx.seen);
+ }
+
+ if (bpf_jit_enable > 1)
+ pr_info("flen=%d proglen=%u pass=%d image=%p\n",
+ flen, proglen, pass, image);
+
+ if (image) {
+ if (bpf_jit_enable > 1)
+ print_hex_dump(KERN_ERR, "JIT code: ",
+ DUMP_PREFIX_ADDRESS,
+ 16, 1, code_base,
+ proglen, false);
+
+ bpf_flush_icache(code_base, code_base + (proglen/4));
+ /* Function descriptor nastiness: Address + TOC */
+ ((u64 *)image)[0] = (u64)code_base;
+ ((u64 *)image)[1] = local_paca->kernel_toc;
+ fp->bpf_func = (void *)image;
+ }
+out:
+ kfree(addrs);
+ return;
+}
+
+static void jit_free_defer(struct work_struct *arg)
+{
+ module_free(NULL, arg);
+}
+
+/* run from softirq, we must use a work_struct to call
+ * module_free() from process context
+ */
+void bpf_jit_free(struct sk_filter *fp)
+{
+ if (fp->bpf_func != sk_run_filter) {
+ struct work_struct *work = (struct work_struct *)fp->bpf_func;
+
+ INIT_WORK(work, jit_free_defer);
+ schedule_work(work);
+ }
+}
^ permalink raw reply related
* [RFC PATCH 0/1] BPF JIT for PPC64
From: Matt Evans @ 2011-06-24 6:02 UTC (permalink / raw)
To: netdev, linuxppc-dev
Hi,
Inspired by Eric Dumazet's x86-64 compiler for Berkeley Packet Filter programs,
I've written a BPF compiler for 64-bit PowerPC. Although it hasn't finished its
strenuous testing regime, I'll have intermittent net access for a couple of
weeks so thought I'd post it for feedback now and submit a 'proper' version when
I'm back.
It's a fairly simple code generator, following a similar structure to the x86
version. The filter programs are an array of opcode/constant/branch destination
structs, and can perform arithmetic/logical/comparison operations on two virtual
registers A and X, loads from packet headers/data and accesses to local
variables, M[]. Branching is also supported, but only forwards and only within
the extent of the program.
I would probably describe this as more of a "static template binary translator"
than a "JIT" but have kept naming consistent :)
Features include:
- Filter code is generated as an ABI-compliant function, stackframe &
prologue/epilogue if necessary.
- Simple filters (e.g. RET nn) need no stackframe or save/restore code so
generate into only an li/blr.
- Local variables, M[], live in registers
- I believe this supports all BPF opcodes, although "complicated" loads from
negative packet offsets (e.g. SKF_LL_OFF) are not yet supported.
Caveats include: :)
- Packet data loads call out to simple helper functions (bpf_jit.S) which
themselves may fall back to a trampoline to skb_copy_bits. I haven't decided
whether (as per comments there) it would be better to generate the simple
loads inline and only call out in the slow case.
- Branches currently generate to "bcc 1f; b <far dest>; 1:" or
"bcc <near dest> ; nop" so either case is the same size. Multiple passes of
assembly are used (the first gets an idea of how big everything is and what
features are required), the next generates everything at accurate size, the
third generates everything with accurate branch destination addresses); I
intend not to nop-pad the short branch case but changing code size may
result in more passes and a 'settling-down period'. Kept simple for now.
- Anyone running PPC64 little-endian is doing something both interesting and
unsupported for this work :-) (There are some trivial endian assumptions.)
Tested in-situ (tcpdump with varying complexity filters) and with a random BPF
generator; I haven't verified loads from the fall back skb_copy_bits path. Bug
reports/testing would be very welcome.
Cheers,
Matt
^ permalink raw reply
* Re: [PATCH] powerpc/85xx: disable timebase synchronization under the hypervisor
From: Segher Boessenkool @ 2011-06-24 3:50 UTC (permalink / raw)
To: Tabi Timur-B04825
Cc: McClintock Matthew-B29882, Wood Scott-B07421, Gala Kumar-B11780,
paulus@samba.org, linuxppc-dev@ozlabs.org
In-Reply-To: <4E03F8C1.60706@freescale.com>
(context put back:)
>> But does that mean that a guest should never be allowed to modify a
>> virtualized
>> timebase register, even if the hypervisor can support it?
>
> The book3e mtspr writeup doesn't appear to specify the behavior when
> writing to a read-only SPR, so perhaps you could argue that something
> other
> than a no-op is implementation-specific behavior.
>> v2.06 III-E 9.2.1:
>> "Writing the Time Base is hypervisor privileged."
>>
>> v2.06 III-E 2.1:
>> "If a hypervisor-privileged register is accessed in the guest
>> supervisor
>> state (MSR[GS PR] = 0b10), an Embedded Hypervisor Privilege exception
>> occurs."
>>
>> (v2.06 III-E 5.4.1, the big SPR table, also shows the TB regs (for
>> writing,
>> i.e. 284 and 285) to be hypervisor privileged. Consistency, hurray
>> :-) )
>
> To me, all this means that a guest cannot write to the actual timebase
> register.
It also means that the hypervisor gets a trap when a guest tries to do
this.
> I'm not interpreting this to mean that a hypervisor can't
> virtualize the timebase and allow a guest to read/write a virtual
> timebase
> register, so that it thinks it's writing to the real hardware timebase
> register.
Yes, a hypervisor can do this. The behaviour of the hardware is not
implementation-specific (modulo bugs ;-) ); when a guest tries to write
to the timebase, the hypervisor gets a trap. The hypervisor can then
do whatever it wants with it.
Segher
^ permalink raw reply
* Re: [PATCH] powerpc/85xx: disable timebase synchronization under the hypervisor
From: Tabi Timur-B04825 @ 2011-06-24 2:38 UTC (permalink / raw)
To: Segher Boessenkool
Cc: McClintock Matthew-B29882, Wood Scott-B07421, Gala Kumar-B11780,
paulus@samba.org, linuxppc-dev@ozlabs.org
In-Reply-To: <59f786bfaced051a14e2bb75d3d1ce77@kernel.crashing.org>
Segher Boessenkool wrote:
>
> v2.06 III-E 9.2.1:
> "Writing the Time Base is hypervisor privileged."
>
> v2.06 III-E 2.1:
> "If a hypervisor-privileged register is accessed in the guest supervisor
> state (MSR[GS PR] =3D 0b10), an Embedded Hypervisor Privilege exception
> occurs."
>
> (v2.06 III-E 5.4.1, the big SPR table, also shows the TB regs (for writin=
g,
> i.e. 284 and 285) to be hypervisor privileged. Consistency, hurray :-) )
To me, all this means that a guest cannot write to the actual timebase=20
register. I'm not interpreting this to mean that a hypervisor can't=20
virtualize the timebase and allow a guest to read/write a virtual timebase=
=20
register, so that it thinks it's writing to the real hardware timebase regi=
ster.
--=20
Timur Tabi
Linux kernel developer at Freescale=
^ permalink raw reply
* Re: [PATCH] powerpc/85xx: disable timebase synchronization under the hypervisor
From: Segher Boessenkool @ 2011-06-24 2:36 UTC (permalink / raw)
To: Scott Wood
Cc: Wood Scott-B07421, linuxppc-dev@ozlabs.org, paulus@samba.org,
McClintock Matthew-B29882, Gala Kumar-B11780, Timur Tabi
In-Reply-To: <20110623124802.7aeb6b66@schlenkerla.am.freescale.net>
>> But does that mean that a guest should never be allowed to modify a
>> virtualized
>> timebase register, even if the hypervisor can support it?
>
> The book3e mtspr writeup doesn't appear to specify the behavior when
> writing to a read-only SPR, so perhaps you could argue that something
> other
> than a no-op is implementation-specific behavior.
v2.06 III-E 9.2.1:
"Writing the Time Base is hypervisor privileged."
v2.06 III-E 2.1:
"If a hypervisor-privileged register is accessed in the guest supervisor
state (MSR[GS PR] = 0b10), an Embedded Hypervisor Privilege exception
occurs."
(v2.06 III-E 5.4.1, the big SPR table, also shows the TB regs (for
writing,
i.e. 284 and 285) to be hypervisor privileged. Consistency, hurray :-)
)
Segher
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox