* Re: [PATCH v2] powerpc: Rework lazy-interrupt handling
From: Benjamin Herrenschmidt @ 2012-02-09 20:47 UTC (permalink / raw)
To: Tudor Laurentiu
Cc: Scott Wood, Stuart Yoder, Anton Blanchard, linuxppc-dev,
Paul Mackerras
In-Reply-To: <4F33FC65.40702@freescale.com>
On Thu, 2012-02-09 at 19:03 +0200, Tudor Laurentiu wrote:
> > +masked_interrupt_book3e_0x900:
> > + ACK_DEC(r11);
> > + li r11,PACA_HAPPENED_DEC
> > + b masked_interrupt_book3e_no_mask
> > +masked_interrupt_book3e_0x980:
> > + ACK_FIT(r11);
> > + li r11,PACA_HAPPENED_DEC
> > + b masked_interrupt_book3e_no_mask
> > +masked_interrupt_book3e_0x280:
> > +masked_interrupt_book3e_0x2c0:
> > + li r11,PACA_HAPPENED_DBELL
> > + b masked_interrupt_book3e_no_mask
> > +
> > +masked_interrupt_book3e_no_mask:
> > + mtcr r10
> > + lbz r10,PACAIRQHAPPENED(r13)
> > + ori r10,r10,r11
>
> Shouldn't this be an 'or'?
Yes, absolutely. This is a typo/thinko I do all the time ... oops.
> > + stb r10,PACAIRQHAPPENED(r13)
> > + b 1f
> > +masked_interrupt_book3e_full_mask:
> > mtcr r10
> > -masked_interrupt_book3e_common:
> > - stb r11,PACAHARDIRQEN(r13)
> > + lbz r10,PACAIRQHAPPENED(r13)
> > + ori r10,r10,r11
>
> Same comment.
I'll respin and fix.
Cheers,
Ben
> > + stb r10,PACAIRQHAPPENED(r13)
> > mfspr r10,SPRN_SRR1
> > rldicl r11,r10,48,1 /* clear MSR_EE */
> > rotldi r10,r11,16
> > mtspr SPRN_SRR1,r10
> > - ld r10,PACA_EXGEN+EX_R10(r13); /* restore registers */
> > +1: ld r10,PACA_EXGEN+EX_R10(r13);
> > ld r11,PACA_EXGEN+EX_R11(r13);
> > mfspr r13,SPRN_SPRG_GEN_SCRATCH;
> > rfi
> > b .
> >
> > /*
> > + * Called from arch_local_irq_enable when an interrupt needs
> > + * to be resent. r3 contains either 0x500,0x900,0x260 or 0x280
> > + * to indicate the kind of interrupt. MSR:EE is already off.
> > + * We generate a stackframe like if a real interrupt had happened.
> > + *
> > + * Note: While MSR:EE is off, we need to make sure that _MSR
> > + * in the generated frame has EE set to 1 or the exception
> > + * handler will not properly re-enable them.
> > + */
> > +_GLOBAL(__reemit_interrupt)
> > + /* We are going to jump to the exception common code which
> > + * will retrieve various register values from the PACA which
> > + * we don't give a damn about.
> > + */
> > + mflr r10
> > + mfmsr r11
> > + mfcr r4;
> > + mtspr SPRN_SPRG_GEN_SCRATCH,r13;
> > + std r1,PACA_EXGEN+EX_R1(r13);
> > + stw r4,PACA_EXGEN+EX_CR(r13);
> > + ori r11,r11,MSR_EE
> > + subi r1,r1,INT_FRAME_SIZE;
> > + cmpwi cr0,r3,0x500
> > + beq exc_0x500_common
> > + cmpwi cr0,r3,0x900
> > + beq+ exc_0x900_common
> > + cmpwi cr0,r3,0x280
> > + beq+ exc_0x280_common
> > + blr
> > +
> > +/*
> > * This is called from 0x300 and 0x400 handlers after the prologs with
> > * r14 and r15 containing the fault address and error code, with the
> > * original values stashed away in the PACA
> > @@ -680,6 +762,8 @@ BAD_STACK_TRAMPOLINE(0x000)
> > BAD_STACK_TRAMPOLINE(0x100)
> > BAD_STACK_TRAMPOLINE(0x200)
> > BAD_STACK_TRAMPOLINE(0x260)
> > +BAD_STACK_TRAMPOLINE(0x280)
> > +BAD_STACK_TRAMPOLINE(0x2a0)
> > BAD_STACK_TRAMPOLINE(0x2c0)
> > BAD_STACK_TRAMPOLINE(0x2e0)
> > BAD_STACK_TRAMPOLINE(0x300)
>
> ---
> Best Regards, Laurentiu
^ permalink raw reply
* Re: [PATCH 09/24] PCI, powerpc: Register busn_res for root buses
From: Benjamin Herrenschmidt @ 2012-02-09 21:35 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: linux-arch, Tony Luck, Yinghai Lu, linuxppc-dev, linux-kernel,
Dominik Brodowski, Paul Mackerras, Jesse Barnes, linux-pci,
Andrew Morton, Linus Torvalds
In-Reply-To: <CAErSpo7ekGn-+Mnyz7KL=fVFH3Ed19AeE3MKkZWJ4bd0Jo7kCw@mail.gmail.com>
On Thu, 2012-02-09 at 11:24 -0800, Bjorn Helgaas wrote:
> My point is that the interface between the arch and the PCI core
> should be simply the arch telling the core "this is the range of bus
> numbers you can use." If the firmware doesn't give you the HW limits,
> that's the arch's problem. If you want to assume 0..255 are
> available, again, that's the arch's decision.
>
> But the answer to the question "what bus numbers are available to me"
> depends only on the host bridge HW configuration. It does not depend
> on what pci_scan_child_bus() found. Therefore, I think we can come up
> with a design where pci_bus_update_busn_res_end() is unnecessary.
In an ideal world yes. In a world where there are reverse engineered
platforms on which we aren't 100% sure how thing actually work under the
hood and have the code just adapt on "what's there" (and try to fix it
up -sometimes-), thinks can get a bit murky :-)
But yes, I see your point. As for what is the "correct" setting that
needs to be done so that the patch doesn't end up a regression for us,
I'll have to dig into some ancient HW to dbl check a few things. I hope
0...255 will just work but I can't guarantee it.
What I'll probably do is constraint the core to the values in
hose->min/max, and update selected platforms to put 0..255 in there when
I know for sure they can cope.
Cheers,
Ben.
^ permalink raw reply
* Re: [PATCH] powerpc: Fix WARN_ON in decrementer_check_overflow
From: Hugh Dickins @ 2012-02-09 22:25 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <1328765653.2903.59.camel@pasglop>
On Thu, 9 Feb 2012, Benjamin Herrenschmidt wrote:
> We use __get_cpu_var() which triggers a false positive warning
> in smp_processor_id() thinking interrupts are enabled (at this
> point, they are soft-enabled but hard-disabled).
>
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
>
> I was initially planning to fix that with a more in-depth rework
> of how we do lazy irq disabling on powerpc, but that patch is
> becoming too complex for this release so I'll apply this as a
> stop-gap and leave the full rework for -next
Okay, thanks for the update, that's equivalent to the get_cpu_var
plus put_cpu_var patch I had generally been running with successfully.
(I was not at all confident that it was a sufficient fix, and have
to say "generally" above because one time I got something that looked
like recursive calls overflowing the stack, and IIRC something "irq"
did appear in each frame of the trace. But probably no connection,
never seen again, and I don't recall even which -rc or -next it was.)
Hugh
>
> diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
> index 701d4ac..01e2877 100644
> --- a/arch/powerpc/kernel/irq.c
> +++ b/arch/powerpc/kernel/irq.c
> @@ -118,10 +118,14 @@ static inline notrace void set_soft_enabled(unsigned long enable)
> static inline notrace void decrementer_check_overflow(void)
> {
> u64 now = get_tb_or_rtc();
> - u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
> + u64 *next_tb;
> +
> + preempt_disable();
> + next_tb = &__get_cpu_var(decrementers_next_tb);
>
> if (now >= *next_tb)
> set_dec(1);
> + preempt_enable();
> }
>
> notrace void arch_local_irq_restore(unsigned long en)
^ permalink raw reply
* Re: [PATCH] powerpc: Fix WARN_ON in decrementer_check_overflow
From: Benjamin Herrenschmidt @ 2012-02-09 22:45 UTC (permalink / raw)
To: Hugh Dickins; +Cc: linuxppc-dev
In-Reply-To: <alpine.LSU.2.00.1202091411170.1263@eggly.anvils>
On Thu, 2012-02-09 at 14:25 -0800, Hugh Dickins wrote:
>
> Okay, thanks for the update, that's equivalent to the get_cpu_var
> plus put_cpu_var patch I had generally been running with successfully.
>
> (I was not at all confident that it was a sufficient fix, and have
> to say "generally" above because one time I got something that looked
> like recursive calls overflowing the stack, and IIRC something "irq"
> did appear in each frame of the trace. But probably no connection,
> never seen again, and I don't recall even which -rc or -next it was.)
If you ever see that again, please shoot me the log !
Cheers,
Ben.
^ permalink raw reply
* RE: [PATCH SDK1.2 1/3] powerpc/fsl-pci: Unify pci/pcie initialization code
From: Jia Hongtao-B38951 @ 2012-02-10 2:27 UTC (permalink / raw)
To: Kumar Gala
Cc: linuxppc-dev@lists.ozlabs.org, Li Yang-R58472, Jia Hongtao-B38951
In-Reply-To: <412C8208B4A0464FA894C5F0C278CD5D010060C9@039-SN1MPN1-005.039d.mgd.msft.net>
Hi Kumar,
This series of patches have been pending for a long time.
I'd like to know whether they are look good or not so I can do the further =
work on it.
It's kind of emergency things for me.
Thanks a lot for your attention.
-----Original Message-----
From: Jia Hongtao-B38951=20
Sent: Tuesday, January 10, 2012 3:31 PM
To: Gala Kumar-B11780
Cc: Li Yang-R58472; Jia Hongtao-B38951; linuxppc-dev@lists.ozlabs.org
Subject: RE: [PATCH SDK1.2 1/3] powerpc/fsl-pci: Unify pci/pcie initializat=
ion code
Hi Kumar,
Do you have any idea on this series of patches?
Looking forward to your answer.
Thanks.
--Jia Hongtao.
-----Original Message-----
From: Jia Hongtao-B38951
Sent: Wednesday, December 21, 2011 3:11 PM
To: linuxppc-dev@lists.ozlabs.org
Cc: Li Yang-R58472; Gala Kumar-B11780; Jia Hongtao-B38951
Subject: [PATCH SDK1.2 1/3] powerpc/fsl-pci: Unify pci/pcie initialization =
code
We unified the Freescale pci/pcie initialization by changing the fsl_pci to=
a platform driver.
In previous version pci/pcie initialization is in platform code which Initi=
alize pci bridge base on EP/RC or host/agent settings.
Signed-off-by: Jia Hongtao <B38951@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
---
arch/powerpc/platforms/85xx/p1022_ds.c | 39 +++++++----------------
arch/powerpc/sysdev/fsl_pci.c | 53 ++++++++++++++++++++++++++++=
++++
2 files changed, 65 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platform=
s/85xx/p1022_ds.c
index 2bf4342..41de2c1 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -277,32 +277,9 @@ void __init mpc85xx_smp_init(void);
*/
static void __init p1022_ds_setup_arch(void) { -#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
- dma_addr_t max =3D 0xffffffff;
-
if (ppc_md.progress)
ppc_md.progress("p1022_ds_setup_arch()", 0);
=20
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,p1022-pcie") {
- struct resource rsrc;
- struct pci_controller *hose;
-
- of_address_to_resource(np, 0, &rsrc);
-
- if ((rsrc.start & 0xfffff) =3D=3D 0x8000)
- fsl_add_bridge(np, 1);
- else
- fsl_add_bridge(np, 0);
-
- hose =3D pci_find_hose_for_OF_device(np);
- max =3D min(max, hose->dma_window_base_cur +
- hose->dma_window_size);
- }
-#endif
-
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
diu_ops.get_pixel_format =3D p1022ds_get_pixel_format;
diu_ops.set_gamma_table =3D p1022ds_set_gamma_table;
@@ -316,11 +293,8 @@ static void __init p1022_ds_setup_arch(void) #endif
=20
#ifdef CONFIG_SWIOTLB
- if (memblock_end_of_DRAM() > max) {
+ if (memblock_end_of_DRAM() > 0xffffffff)
ppc_swiotlb_enable =3D 1;
- set_pci_dma_ops(&swiotlb_dma_ops);
- ppc_md.pci_dma_dev_setup =3D pci_dma_dev_setup_swiotlb;
- }
#endif
=20
pr_info("Freescale P1022 DS reference board\n"); @@ -339,6 +313,17 @@ sta=
tic int __init p1022_ds_publish_devices(void) } machine_device_initcall(p=
1022_ds, p1022_ds_publish_devices);
=20
+static struct of_device_id __initdata p1022_pci_ids[] =3D {
+ { .compatible =3D "fsl,p1022-pcie", },
+ {},
+};
+
+static int __init p1022_ds_publish_pci_device(void) {
+ return of_platform_bus_probe(NULL, p1022_pci_ids, NULL); }=20
+machine_arch_initcall(p1022_ds, p1022_ds_publish_pci_device);
+
machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
=20
/*
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c =
index 4ce547e..a0f305d 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -712,3 +712,56 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose)
=20
return 0;
}
+
+static const struct of_device_id pci_ids[] =3D {
+ { .compatible =3D "fsl,mpc8540-pci", },
+ { .compatible =3D "fsl,mpc8548-pcie", },
+ { .compatible =3D "fsl,p1022-pcie", },
+ {},
+};
+
+static int __devinit fsl_pci_probe(struct platform_device *pdev) {
+ struct pci_controller *hose;
+
+ if (of_match_node(pci_ids, pdev->dev.of_node)) {
+ struct resource rsrc;
+ of_address_to_resource(pdev->dev.of_node, 0, &rsrc);
+ if ((rsrc.start & 0xfffff) =3D=3D 8000)
+ fsl_add_bridge(pdev->dev.of_node, 1);
+ else
+ fsl_add_bridge(pdev->dev.of_node, 0);
+
+#ifdef CONFIG_SWIOTLB
+ hose =3D pci_find_hose_for_OF_device(pdev->dev.of_node);
+ /*
+ * if we couldn't map all of DRAM via the dma windows
+ * we need SWIOTLB to handle buffers located outside of
+ * dma capable memory region
+ */
+ if (memblock_end_of_DRAM() > hose->dma_window_base_cur
+ + hose->dma_window_size) {
+ ppc_swiotlb_enable =3D 1;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup =3D pci_dma_dev_setup_swiotlb;
+ }
+#endif
+
+ }
+
+ return 0;
+}
+
+static struct platform_driver fsl_pci_driver =3D {
+ .driver =3D {
+ .name =3D "fsl-pci",
+ .of_match_table =3D pci_ids,
+ },
+ .probe =3D fsl_pci_probe,
+};
+
+static int __init fsl_pci_init(void)
+{
+ return platform_driver_register(&fsl_pci_driver);
+}
+arch_initcall(fsl_pci_init);
--
1.7.5.1
^ permalink raw reply related
* [PATCH 2/2 V2] powerpc/85xx: Add p2020rdb-pc dts support
From: b29983 @ 2012-02-10 3:23 UTC (permalink / raw)
To: linuxppc-dev; +Cc: crazytyt, Tang Yuantian, Poonam Aggrwal, Prabhakar Kushwaha
From: crazytyt <tforjob@163.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Tang Yuantian <b29983@freescale.com>
---
V1 vs V2:
-rename dts from .dts to _32b.dts
-remove amp dts
arch/powerpc/boot/dts/p2020rdb-pc.dtsi | 241 +++++++++++++++++++++++++++++
arch/powerpc/boot/dts/p2020rdb-pc_32b.dts | 96 ++++++++++++
arch/powerpc/boot/dts/p2020rdb-pc_36b.dts | 96 ++++++++++++
3 files changed, 433 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p2020rdb-pc.dtsi
create mode 100644 arch/powerpc/boot/dts/p2020rdb-pc_32b.dts
create mode 100644 arch/powerpc/boot/dts/p2020rdb-pc_36b.dts
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
new file mode 100644
index 0000000..c21d1c7
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
@@ -0,0 +1,241 @@
+/*
+ * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p2020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND Writable User area";
+ };
+ };
+
+ L2switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+
+ cpld@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cpld";
+ reg = <0x3 0x0 0x20000>;
+ read-only;
+ };
+};
+
+&soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "pericom,pt7c4338";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partition@0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI U-Boot Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI DTB Image";
+ };
+
+ partition@100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI Linux Kernel Image";
+ };
+
+ partition@500000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI Compressed RFS Image";
+ };
+
+ partition@900000 {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI JFFS2 RFS";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x1>;
+ };
+ };
+
+ mdio@25520 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ status = "disabled";
+ };
+
+ ptp_clock@24e00 {
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <200>;
+ fsl,tmr-add = <0xCCCCCCCD>;
+ fsl,tmr-fiper1 = <0x3B9AC9FB>;
+ fsl,tmr-fiper2 = <0x0001869B>;
+ fsl,max-adj = <249999999>;
+ };
+
+ enet0: ethernet@24000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@26000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts b/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts
new file mode 100644
index 0000000..852e5b2
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts
@@ -0,0 +1,96 @@
+/*
+ * P2020 RDB-PC 32Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+ model = "fsl,P2020RDB";
+ compatible = "fsl,P2020RDB-PC";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+
+ /* NOR and NAND Flashes */
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xff800000 0x00040000
+ 0x2 0x0 0x0 0xffb00000 0x00020000
+ 0x3 0x0 0x0 0xffa00000 0x00020000>;
+ };
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@ffe08000 {
+ reg = <0 0xffe08000 0 0x1000>;
+ status = "disabled";
+ };
+
+ pci1: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci2: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p2020rdb-pc.dtsi"
+/include/ "fsl/p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts b/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts
new file mode 100644
index 0000000..b5a56ca
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts
@@ -0,0 +1,96 @@
+/*
+ * P2020 RDB-PC 36Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+ model = "fsl,P2020RDB";
+ compatible = "fsl,P2020RDB-PC";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+
+ /* NOR and NAND Flashes */
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xff800000 0x00040000
+ 0x2 0x0 0xf 0xffb00000 0x00020000
+ 0x3 0x0 0xf 0xffa00000 0x00020000>;
+ };
+
+ soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe08000 {
+ reg = <0xf 0xffe08000 0 0x1000>;
+ status = "disabled";
+ };
+
+ pci1: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci2: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p2020rdb-pc.dtsi"
+/include/ "fsl/p2020si-post.dtsi"
--
1.6.4
^ permalink raw reply related
* [PATCH 1/2 V2] powerpc/85xx: Add P1024rdb dts support
From: b29983 @ 2012-02-10 3:33 UTC (permalink / raw)
To: linuxppc-dev; +Cc: crazytyt, Jin Qing, Tang Yuantian
From: crazytyt <tforjob@163.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
---
v1 vs v2:
-remove amp dts
-rename the dts from .dts to _32b.dts
-remove p1024si-pre.dtsi
arch/powerpc/boot/dts/p1024rdb.dtsi | 228 ++++++++++++++++++++++++++++++++
arch/powerpc/boot/dts/p1024rdb_32b.dts | 87 ++++++++++++
arch/powerpc/boot/dts/p1024rdb_36b.dts | 87 ++++++++++++
3 files changed, 402 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1024rdb.dtsi
create mode 100644 arch/powerpc/boot/dts/p1024rdb_32b.dts
create mode 100644 arch/powerpc/boot/dts/p1024rdb_36b.dts
diff --git a/arch/powerpc/boot/dts/p1024rdb.dtsi b/arch/powerpc/boot/dts/p1024rdb.dtsi
new file mode 100644
index 0000000..eb3141d
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1024rdb.dtsi
@@ -0,0 +1,228 @@
+/*
+ * P1024 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00f00000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1900000 {
+ /* 7MB for User Writable Area */
+ reg = <0x01900000 0x00700000>;
+ label = "NAND Writable User area";
+ };
+ };
+};
+
+&soc {
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partition@0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI U-Boot Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI DTB Image";
+ };
+
+ partition@100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI Linux Kernel Image";
+ };
+
+ partition@500000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI Compressed RFS Image";
+ };
+
+ partition@900000 {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI JFFS2 RFS";
+ };
+ };
+ };
+
+ i2c@3000 {
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ usb@23000 {
+ status = "disabled";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <1 1 0 0>;
+ reg = <0x2>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ ethernet@b0000 {
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1024rdb_32b.dts b/arch/powerpc/boot/dts/p1024rdb_32b.dts
new file mode 100644
index 0000000..2f86327
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1024rdb_32b.dts
@@ -0,0 +1,87 @@
+/*
+ * P1024 RDB 32Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1024RDB";
+ compatible = "fsl,P1024RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0x0 0xffe05000 0 0x1000>;
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xff800000 0x00040000>;
+ };
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@ffe09000 {
+ reg = <0x0 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1024rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1024rdb_36b.dts b/arch/powerpc/boot/dts/p1024rdb_36b.dts
new file mode 100644
index 0000000..550495e
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1024rdb_36b.dts
@@ -0,0 +1,87 @@
+/*
+ * P1024 RDB 36Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1024RDB";
+ compatible = "fsl,P1024RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xff800000 0x00040000>;
+ };
+
+ soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1024rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
--
1.6.4
^ permalink raw reply related
* [PATCH 05/60] powerpc: remove the second argument of k[un]map_atomic()
From: Cong Wang @ 2012-02-10 5:39 UTC (permalink / raw)
To: linux-kernel
Cc: Andrea Arcangeli, Dave Carroll, Cong Wang, Marcelo Tosatti,
Alexander Graf, kvm-ppc, Paul Gortmaker, Paul Mackerras,
Avi Kivity, kvm, Andrew Morton, Sukadev Bhattiprolu, linuxppc-dev,
Anton Blanchard, David Gibson
In-Reply-To: <1328852421-19678-1-git-send-email-amwang@redhat.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
---
arch/powerpc/kvm/book3s_pr.c | 4 ++--
arch/powerpc/mm/dma-noncoherent.c | 5 ++---
arch/powerpc/mm/hugetlbpage.c | 4 ++--
arch/powerpc/mm/mem.c | 4 ++--
4 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index e2cfb9e..220fcdf 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -227,14 +227,14 @@ static void kvmppc_patch_dcbz(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte)
hpage_offset /= 4;
get_page(hpage);
- page = kmap_atomic(hpage, KM_USER0);
+ page = kmap_atomic(hpage);
/* patch dcbz into reserved instruction, so we trap */
for (i=hpage_offset; i < hpage_offset + (HW_PAGE_SIZE / 4); i++)
if ((page[i] & 0xff0007ff) == INS_DCBZ)
page[i] &= 0xfffffff7;
- kunmap_atomic(page, KM_USER0);
+ kunmap_atomic(page);
put_page(hpage);
}
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
index 329be36..6747eec 100644
--- a/arch/powerpc/mm/dma-noncoherent.c
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -365,12 +365,11 @@ static inline void __dma_sync_page_highmem(struct page *page,
local_irq_save(flags);
do {
- start = (unsigned long)kmap_atomic(page + seg_nr,
- KM_PPC_SYNC_PAGE) + seg_offset;
+ start = (unsigned long)kmap_atomic(page + seg_nr) + seg_offset;
/* Sync this buffer segment */
__dma_sync((void *)start, seg_size, direction);
- kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
+ kunmap_atomic((void *)start);
seg_nr++;
/* Calculate next buffer segment size */
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index a8b3cc7..57c7465 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -910,9 +910,9 @@ void flush_dcache_icache_hugepage(struct page *page)
if (!PageHighMem(page)) {
__flush_dcache_icache(page_address(page+i));
} else {
- start = kmap_atomic(page+i, KM_PPC_SYNC_ICACHE);
+ start = kmap_atomic(page+i);
__flush_dcache_icache(start);
- kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+ kunmap_atomic(start);
}
}
}
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index d974b79..baaafde 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -458,9 +458,9 @@ void flush_dcache_icache_page(struct page *page)
#endif
#ifdef CONFIG_BOOKE
{
- void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
+ void *start = kmap_atomic(page);
__flush_dcache_icache(start);
- kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+ kunmap_atomic(start);
}
#elif defined(CONFIG_8xx) || defined(CONFIG_PPC64)
/* On 8xx there is no need to kmap since highmem is not supported */
--
1.7.7.6
^ permalink raw reply related
* [PATCH 59/60] highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename]
From: Cong Wang @ 2012-02-10 5:40 UTC (permalink / raw)
To: linux-kernel
Cc: Nicolas Pitre, linux-mips, Cong Wang, David Howells,
Paul Gortmaker, James Bottomley, Paul Mackerras, H. Peter Anvin,
sparclinux, linux-am33-list, Russell King, Helge Deller, x86,
James E.J. Bottomley, Ingo Molnar, Konrad Rzeszutek Wilk,
Chris Metcalf, Stephen Warren, Thomas Gleixner, linux-arm-kernel,
linux-parisc, Ralf Baechle, Kyle McMartin, Andrew Morton,
Koichi Yasutake, linuxppc-dev, David S. Miller
In-Reply-To: <1328852421-19678-1-git-send-email-amwang@redhat.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
---
arch/arm/include/asm/highmem.h | 2 +-
arch/arm/mm/highmem.c | 4 ++--
arch/frv/include/asm/highmem.h | 2 +-
arch/frv/mm/highmem.c | 4 ++--
arch/mips/include/asm/highmem.h | 2 +-
arch/mips/mm/highmem.c | 4 ++--
arch/mn10300/include/asm/highmem.h | 2 +-
arch/parisc/include/asm/cacheflush.h | 2 +-
arch/powerpc/include/asm/highmem.h | 2 +-
arch/sparc/include/asm/highmem.h | 2 +-
arch/sparc/mm/highmem.c | 4 ++--
arch/tile/include/asm/highmem.h | 2 +-
arch/tile/mm/highmem.c | 4 ++--
arch/x86/include/asm/highmem.h | 2 +-
arch/x86/mm/highmem_32.c | 4 ++--
include/linux/highmem.h | 11 +++--------
16 files changed, 24 insertions(+), 29 deletions(-)
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index a4edd19..8c5e828 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -57,7 +57,7 @@ static inline void *kmap_high_get(struct page *page)
#ifdef CONFIG_HIGHMEM
extern void *kmap(struct page *page);
extern void kunmap(struct page *page);
-extern void *__kmap_atomic(struct page *page);
+extern void *kmap_atomic(struct page *page);
extern void __kunmap_atomic(void *kvaddr);
extern void *kmap_atomic_pfn(unsigned long pfn);
extern struct page *kmap_atomic_to_page(const void *ptr);
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 807c057..5a21505 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -36,7 +36,7 @@ void kunmap(struct page *page)
}
EXPORT_SYMBOL(kunmap);
-void *__kmap_atomic(struct page *page)
+void *kmap_atomic(struct page *page)
{
unsigned int idx;
unsigned long vaddr;
@@ -81,7 +81,7 @@ void *__kmap_atomic(struct page *page)
return (void *)vaddr;
}
-EXPORT_SYMBOL(__kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic);
void __kunmap_atomic(void *kvaddr)
{
diff --git a/arch/frv/include/asm/highmem.h b/arch/frv/include/asm/highmem.h
index a8d6565..716956a 100644
--- a/arch/frv/include/asm/highmem.h
+++ b/arch/frv/include/asm/highmem.h
@@ -157,7 +157,7 @@ static inline void kunmap_atomic_primary(void *kvaddr, enum km_type type)
pagefault_enable();
}
-void *__kmap_atomic(struct page *page);
+void *kmap_atomic(struct page *page);
void __kunmap_atomic(void *kvaddr);
#endif /* !__ASSEMBLY__ */
diff --git a/arch/frv/mm/highmem.c b/arch/frv/mm/highmem.c
index fd7fcd4..31902c9 100644
--- a/arch/frv/mm/highmem.c
+++ b/arch/frv/mm/highmem.c
@@ -37,7 +37,7 @@ struct page *kmap_atomic_to_page(void *ptr)
return virt_to_page(ptr);
}
-void *__kmap_atomic(struct page *page)
+void *kmap_atomic(struct page *page)
{
unsigned long paddr;
int type;
@@ -64,7 +64,7 @@ void *__kmap_atomic(struct page *page)
return NULL;
}
}
-EXPORT_SYMBOL(__kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic);
void __kunmap_atomic(void *kvaddr)
{
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
index 77e6440..2d91888 100644
--- a/arch/mips/include/asm/highmem.h
+++ b/arch/mips/include/asm/highmem.h
@@ -47,7 +47,7 @@ extern void kunmap_high(struct page *page);
extern void *kmap(struct page *page);
extern void kunmap(struct page *page);
-extern void *__kmap_atomic(struct page *page);
+extern void *kmap_atomic(struct page *page);
extern void __kunmap_atomic(void *kvaddr);
extern void *kmap_atomic_pfn(unsigned long pfn);
extern struct page *kmap_atomic_to_page(void *ptr);
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 3634c7e..aff5705 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -41,7 +41,7 @@ EXPORT_SYMBOL(kunmap);
* kmaps are appropriate for short, tight code paths only.
*/
-void *__kmap_atomic(struct page *page)
+void *kmap_atomic(struct page *page)
{
unsigned long vaddr;
int idx, type;
@@ -62,7 +62,7 @@ void *__kmap_atomic(struct page *page)
return (void*) vaddr;
}
-EXPORT_SYMBOL(__kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic);
void __kunmap_atomic(void *kvaddr)
{
diff --git a/arch/mn10300/include/asm/highmem.h b/arch/mn10300/include/asm/highmem.h
index bfe2d88..7c137cd 100644
--- a/arch/mn10300/include/asm/highmem.h
+++ b/arch/mn10300/include/asm/highmem.h
@@ -70,7 +70,7 @@ static inline void kunmap(struct page *page)
* be used in IRQ contexts, so in some (very limited) cases we need
* it.
*/
-static inline unsigned long __kmap_atomic(struct page *page)
+static inline unsigned long kmap_atomic(struct page *page)
{
unsigned long vaddr;
int idx, type;
diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h
index da601dd..9f21ab0 100644
--- a/arch/parisc/include/asm/cacheflush.h
+++ b/arch/parisc/include/asm/cacheflush.h
@@ -140,7 +140,7 @@ static inline void *kmap(struct page *page)
#define kunmap(page) kunmap_parisc(page_address(page))
-static inline void *__kmap_atomic(struct page *page)
+static inline void *kmap_atomic(struct page *page)
{
pagefault_disable();
return page_address(page);
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index dbc2640..caaf6e0 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -79,7 +79,7 @@ static inline void kunmap(struct page *page)
kunmap_high(page);
}
-static inline void *__kmap_atomic(struct page *page)
+static inline void *kmap_atomic(struct page *page)
{
return kmap_atomic_prot(page, kmap_prot);
}
diff --git a/arch/sparc/include/asm/highmem.h b/arch/sparc/include/asm/highmem.h
index 3d7afbb..3b6e00d 100644
--- a/arch/sparc/include/asm/highmem.h
+++ b/arch/sparc/include/asm/highmem.h
@@ -70,7 +70,7 @@ static inline void kunmap(struct page *page)
kunmap_high(page);
}
-extern void *__kmap_atomic(struct page *page);
+extern void *kmap_atomic(struct page *page);
extern void __kunmap_atomic(void *kvaddr);
extern struct page *kmap_atomic_to_page(void *vaddr);
diff --git a/arch/sparc/mm/highmem.c b/arch/sparc/mm/highmem.c
index 77140a0..055c66c 100644
--- a/arch/sparc/mm/highmem.c
+++ b/arch/sparc/mm/highmem.c
@@ -30,7 +30,7 @@
#include <asm/tlbflush.h>
#include <asm/fixmap.h>
-void *__kmap_atomic(struct page *page)
+void *kmap_atomic(struct page *page)
{
unsigned long vaddr;
long idx, type;
@@ -64,7 +64,7 @@ void *__kmap_atomic(struct page *page)
return (void*) vaddr;
}
-EXPORT_SYMBOL(__kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic);
void __kunmap_atomic(void *kvaddr)
{
diff --git a/arch/tile/include/asm/highmem.h b/arch/tile/include/asm/highmem.h
index b2a6c5d..fc8429a 100644
--- a/arch/tile/include/asm/highmem.h
+++ b/arch/tile/include/asm/highmem.h
@@ -59,7 +59,7 @@ void *kmap_fix_kpte(struct page *page, int finished);
/* This macro is used only in map_new_virtual() to map "page". */
#define kmap_prot page_to_kpgprot(page)
-void *__kmap_atomic(struct page *page);
+void *kmap_atomic(struct page *page);
void __kunmap_atomic(void *kvaddr);
void *kmap_atomic_pfn(unsigned long pfn);
void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot);
diff --git a/arch/tile/mm/highmem.c b/arch/tile/mm/highmem.c
index 31dbbd9..ef8e5a6 100644
--- a/arch/tile/mm/highmem.c
+++ b/arch/tile/mm/highmem.c
@@ -224,12 +224,12 @@ void *kmap_atomic_prot(struct page *page, pgprot_t prot)
}
EXPORT_SYMBOL(kmap_atomic_prot);
-void *__kmap_atomic(struct page *page)
+void *kmap_atomic(struct page *page)
{
/* PAGE_NONE is a magic value that tells us to check immutability. */
return kmap_atomic_prot(page, PAGE_NONE);
}
-EXPORT_SYMBOL(__kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic);
void __kunmap_atomic(void *kvaddr)
{
diff --git a/arch/x86/include/asm/highmem.h b/arch/x86/include/asm/highmem.h
index 3bd0402..302a323 100644
--- a/arch/x86/include/asm/highmem.h
+++ b/arch/x86/include/asm/highmem.h
@@ -61,7 +61,7 @@ void *kmap(struct page *page);
void kunmap(struct page *page);
void *kmap_atomic_prot(struct page *page, pgprot_t prot);
-void *__kmap_atomic(struct page *page);
+void *kmap_atomic(struct page *page);
void __kunmap_atomic(void *kvaddr);
void *kmap_atomic_pfn(unsigned long pfn);
void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot);
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index f4f29b1..6f31ee5 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -51,11 +51,11 @@ void *kmap_atomic_prot(struct page *page, pgprot_t prot)
}
EXPORT_SYMBOL(kmap_atomic_prot);
-void *__kmap_atomic(struct page *page)
+void *kmap_atomic(struct page *page)
{
return kmap_atomic_prot(page, kmap_prot);
}
-EXPORT_SYMBOL(__kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic);
/*
* This is the same as kmap_atomic() but can map memory that doesn't
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
index 284ec55..6549ed7 100644
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
@@ -55,12 +55,12 @@ static inline void kunmap(struct page *page)
{
}
-static inline void *__kmap_atomic(struct page *page)
+static inline void *kmap_atomic(struct page *page)
{
pagefault_disable();
return page_address(page);
}
-#define kmap_atomic_prot(page, prot) __kmap_atomic(page)
+#define kmap_atomic_prot(page, prot) kmap_atomic(page)
static inline void __kunmap_atomic(void *addr)
{
@@ -121,15 +121,10 @@ static inline void kmap_atomic_idx_pop(void)
#define NARG_(_2, _1, n, ...) n
#define NARG(...) NARG_(__VA_ARGS__, 2, 1, :)
-static inline void *kmap_atomic(struct page *page)
-{
- return __kmap_atomic(page);
-}
-
static inline void __deprecated *kmap_atomic_deprecated(struct page *page,
enum km_type km)
{
- return __kmap_atomic(page);
+ return kmap_atomic(page);
}
#define kmap_atomic1(...) kmap_atomic(__VA_ARGS__)
--
1.7.7.6
^ permalink raw reply related
* [PATCH 1/2 v5] powerpc/85xx: Add p1020rdb-pc platform support
From: Zhicheng Fan @ 2012-02-10 6:48 UTC (permalink / raw)
To: linuxppc-dev, galak; +Cc: Zhicheng Fan
From: Zhicheng Fan <b32736@freescale.com>
Signed-off-by: Zhicheng Fan <b32736@freescale.com>
---
arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 24 +++++++++++++++++++++++-
1 files changed, 23 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index ccf520e..d54772e 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -1,7 +1,7 @@
/*
* MPC85xx RDB Board Setup
*
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009,2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -90,10 +90,18 @@ static void __init mpc85xx_rdb_setup_arch(void)
machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
*/
+static int __init p1020_rdb_pc_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PC");
+}
+
static int __init p2020_rdb_probe(void)
{
unsigned long root = of_get_flat_dt_root();
@@ -139,3 +147,17 @@ define_machine(p1020_rdb) {
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
+
+define_machine(p1020_rdb_pc) {
+ .name = "P1020RDB-PC",
+ .probe = p1020_rdb_pc_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
--
1.7.0.4
^ permalink raw reply related
* [PATCH 2/2 v5] powerpc/dts: Add dts for p1020rdb-pc board
From: Zhicheng Fan @ 2012-02-10 6:48 UTC (permalink / raw)
To: linuxppc-dev, galak; +Cc: Zhicheng Fan
In-Reply-To: <1328856496-2873-1-git-send-email-B32736@freescale.com>
From: Zhicheng Fan <b32736@freescale.com>
P1020RDB-PC Overview
------------------
1Gbyte DDR3 SDRAM
32 Mbyte NAND flash
10 16Mbyte NOR flash
16 Mbyte SPI flash
SD connector to interface with the SD memory card
Real-time clock on I2C bus
PCIe:
- x1 PCIe slot
- x1 mini-PCIe slot
10/100/1000 BaseT Ethernet ports:
- eTSEC1, RGMII: one 10/100/1000 port using VitesseTM VSC7385 L2 switch
- eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221
- eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021
USB 2.0 port:
- Two USB2.0 Type A receptacles
- One USB2.0 signal to Mini PCIe slot
Dual RJ45 UART ports:
- DUART interface: supports two UARTs up to 115200 bps for console display
Signed-off-by: Zhicheng Fan <b32736@freescale.com>
---
arch/powerpc/boot/dts/p1020rdb-pc.dtsi | 247 ++++++++++++++++++++++
arch/powerpc/boot/dts/p1020rdb-pc_32b.dts | 90 ++++++++
arch/powerpc/boot/dts/p1020rdb-pc_36b.dts | 90 ++++++++
arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts | 64 ++++++
arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts | 142 +++++++++++++
5 files changed, 633 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1020rdb-pc.dtsi
create mode 100644 arch/powerpc/boot/dts/p1020rdb-pc_32b.dts
create mode 100644 arch/powerpc/boot/dts/p1020rdb-pc_36b.dts
create mode 100644 arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts
create mode 100644 arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/p1020rdb-pc.dtsi
new file mode 100644
index 0000000..c952cd3
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb-pc.dtsi
@@ -0,0 +1,247 @@
+/*
+ * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND Writable User area";
+ };
+ };
+
+ L2switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+
+ cpld@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cpld";
+ reg = <0x3 0x0 0x20000>;
+ read-only;
+ };
+};
+
+&soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "pericom,pt7c4338";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+
+ partition@u-boot {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@dtb {
+ /* 512KB for DTB Image*/
+ reg = <0x00080000 0x00080000>;
+ label = "dtb";
+ };
+
+ partition@kernel {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "kernel";
+ };
+
+ partition@fs {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "file system";
+ };
+
+ partition@jffs-fs {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "file system jffs2";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
+ usb@23000 {
+ phy_type = "ulpi";
+ };
+ */
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ };
+
+ tbi0: tbi-phy@11 {
+ device_type = "tbi-phy";
+ reg = <0x11>;
+ };
+ };
+
+ mdio@25000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts b/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts
new file mode 100644
index 0000000..4de69b7
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts
@@ -0,0 +1,90 @@
+/*
+ * P1020 RDB-PC Device Tree Source (32-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1020RDB-PC";
+ compatible = "fsl,P1020RDB-PC";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+
+ /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xff800000 0x00040000
+ 0x2 0x0 0x0 0xffb00000 0x00020000
+ 0x3 0x0 0x0 0xffa00000 0x00020000>;
+ };
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@ffe09000 {
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ reg = <0 0xffe09000 0 0x1000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1020rdb-pc.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts b/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts
new file mode 100644
index 0000000..5237da7
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts
@@ -0,0 +1,90 @@
+/*
+ * P1020 RDB-PC Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1020RDB-PC";
+ compatible = "fsl,P1020RDB-PC";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+
+ /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xff800000 0x00040000
+ 0x2 0x0 0xf 0xffb00000 0x00040000
+ 0x3 0x0 0xf 0xffa00000 0x00020000>;
+ };
+
+ soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1020rdb-pc.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts
new file mode 100644
index 0000000..f411515
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts
@@ -0,0 +1,64 @@
+/*
+ * P1020 RDB-PC Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
+ * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
+ *
+ * Please note to add "-b 0" for core0's dts compiling.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020rdb-pc_32b.dts"
+
+/ {
+ model = "fsl,P1020RDB-PC";
+ compatible = "fsl,P1020RDB-PC";
+
+ aliases {
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ serial0 = &serial0;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ PowerPC,P1020@1 {
+ status = "disabled";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus@ffe05000 {
+ status = "disabled";
+ };
+
+ soc@ffe00000 {
+ serial1: serial@4600 {
+ status = "disabled";
+ };
+
+ enet0: ethernet@b0000 {
+ status = "disabled";
+ };
+
+ mpic: pic@40000 {
+ protected-sources = <
+ 42 29 30 34 /* serial1, enet0-queue-group0 */
+ 17 18 24 45 /* enet0-queue-group1, crypto */
+ >;
+ pic-no-reset;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts
new file mode 100644
index 0000000..a91335a
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts
@@ -0,0 +1,142 @@
+/*
+ * P1020 RDB-PC Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, eth0, crypto.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020rdb-pc_32b.dts"
+
+/ {
+ model = "fsl,P1020RDB-PC";
+ compatible = "fsl,P1020RDB-PC";
+
+ aliases {
+ ethernet0 = &enet0;
+ serial0 = &serial1;
+ };
+
+ cpus {
+ PowerPC,P1020@0 {
+ status = "disabled";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus@ffe05000 {
+ status = "disabled";
+ };
+
+ soc@ffe00000 {
+ ecm-law@0 {
+ status = "disabled";
+ };
+
+ ecm@1000 {
+ status = "disabled";
+ };
+
+ memory-controller@2000 {
+ status = "disabled";
+ };
+
+ i2c@3000 {
+ status = "disabled";
+ };
+
+ i2c@3100 {
+ status = "disabled";
+ };
+
+ serial0: serial@4500 {
+ status = "disabled";
+ };
+
+ spi@7000 {
+ status = "disabled";
+ };
+
+ gpio: gpio-controller@f000 {
+ status = "disabled";
+ };
+
+ dma@21300 {
+ status = "disabled";
+ };
+
+ mdio@24000 {
+ status = "disabled";
+ };
+
+ mdio@25000 {
+ status = "disabled";
+ };
+
+ enet1: ethernet@b1000 {
+ status = "disabled";
+ };
+
+ enet2: ethernet@b2000 {
+ status = "disabled";
+ };
+
+ usb@22000 {
+ status = "disabled";
+ };
+
+ sdhci@2e000 {
+ status = "disabled";
+ };
+
+ mpic: pic@40000 {
+ protected-sources = <
+ 16 /* ecm, mem, L2, pci0, pci1 */
+ 43 42 59 /* i2c, serial0, spi */
+ 47 63 62 /* gpio, tdm */
+ 20 21 22 23 /* dma */
+ 03 02 /* mdio */
+ 35 36 40 /* enet1-queue-group0 */
+ 51 52 67 /* enet1-queue-group1 */
+ 31 32 33 /* enet2-queue-group0 */
+ 25 26 27 /* enet2-queue-group1 */
+ 28 72 58 /* usb, sdhci, crypto */
+ 0xb0 0xb1 0xb2 /* message */
+ 0xb3 0xb4 0xb5
+ 0xb6 0xb7
+ 0xe0 0xe1 0xe2 /* msi */
+ 0xe3 0xe4 0xe5
+ 0xe6 0xe7 /* sdhci, crypto , pci */
+ >;
+ pic-no-reset;
+ };
+
+ msi@41600 {
+ status = "disabled";
+ };
+
+ global-utilities@e0000 { //global utilities block
+ status = "disabled";
+ };
+ };
+
+ pci0: pcie@ffe09000 {
+ status = "disabled";
+ };
+
+ pci1: pcie@ffe0a000 {
+ status = "disabled";
+ };
+};
--
1.7.0.4
^ permalink raw reply related
* [PATCH 1/2 V3] powerpc/85xx: Add P1024rdb dts support
From: b29983 @ 2012-02-10 8:00 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Tang Yuantian, Jin Qing
From: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
---
v3:
-correct the patch author
arch/powerpc/boot/dts/p1024rdb.dtsi | 228 ++++++++++++++++++++++++++++++++
arch/powerpc/boot/dts/p1024rdb_32b.dts | 87 ++++++++++++
arch/powerpc/boot/dts/p1024rdb_36b.dts | 87 ++++++++++++
3 files changed, 402 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1024rdb.dtsi
create mode 100644 arch/powerpc/boot/dts/p1024rdb_32b.dts
create mode 100644 arch/powerpc/boot/dts/p1024rdb_36b.dts
diff --git a/arch/powerpc/boot/dts/p1024rdb.dtsi b/arch/powerpc/boot/dts/p1024rdb.dtsi
new file mode 100644
index 0000000..eb3141d
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1024rdb.dtsi
@@ -0,0 +1,228 @@
+/*
+ * P1024 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00f00000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1900000 {
+ /* 7MB for User Writable Area */
+ reg = <0x01900000 0x00700000>;
+ label = "NAND Writable User area";
+ };
+ };
+};
+
+&soc {
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partition@0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI U-Boot Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI DTB Image";
+ };
+
+ partition@100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI Linux Kernel Image";
+ };
+
+ partition@500000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI Compressed RFS Image";
+ };
+
+ partition@900000 {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI JFFS2 RFS";
+ };
+ };
+ };
+
+ i2c@3000 {
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ usb@23000 {
+ status = "disabled";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <1 1 0 0>;
+ reg = <0x2>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ ethernet@b0000 {
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1024rdb_32b.dts b/arch/powerpc/boot/dts/p1024rdb_32b.dts
new file mode 100644
index 0000000..2f86327
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1024rdb_32b.dts
@@ -0,0 +1,87 @@
+/*
+ * P1024 RDB 32Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1024RDB";
+ compatible = "fsl,P1024RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0x0 0xffe05000 0 0x1000>;
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xff800000 0x00040000>;
+ };
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@ffe09000 {
+ reg = <0x0 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1024rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1024rdb_36b.dts b/arch/powerpc/boot/dts/p1024rdb_36b.dts
new file mode 100644
index 0000000..550495e
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1024rdb_36b.dts
@@ -0,0 +1,87 @@
+/*
+ * P1024 RDB 36Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1024RDB";
+ compatible = "fsl,P1024RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xff800000 0x00040000>;
+ };
+
+ soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1024rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
--
1.6.4
^ permalink raw reply related
* [PATCH 2/2 V3] powerpc/85xx: Add p2020rdb-pc dts support
From: b29983 @ 2012-02-10 7:59 UTC (permalink / raw)
To: linuxppc-dev
Cc: Tang Yuantian, Tang Yuantian, Poonam Aggrwal, Prabhakar Kushwaha
From: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Tang Yuantian <b29983@freescale.com>
---
v3:
-correct the patch author
arch/powerpc/boot/dts/p2020rdb-pc.dtsi | 241 +++++++++++++++++++++++++++++
arch/powerpc/boot/dts/p2020rdb-pc_32b.dts | 96 ++++++++++++
arch/powerpc/boot/dts/p2020rdb-pc_36b.dts | 96 ++++++++++++
3 files changed, 433 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p2020rdb-pc.dtsi
create mode 100644 arch/powerpc/boot/dts/p2020rdb-pc_32b.dts
create mode 100644 arch/powerpc/boot/dts/p2020rdb-pc_36b.dts
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
new file mode 100644
index 0000000..c21d1c7
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
@@ -0,0 +1,241 @@
+/*
+ * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p2020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND Writable User area";
+ };
+ };
+
+ L2switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+
+ cpld@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cpld";
+ reg = <0x3 0x0 0x20000>;
+ read-only;
+ };
+};
+
+&soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "pericom,pt7c4338";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partition@0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI U-Boot Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI DTB Image";
+ };
+
+ partition@100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI Linux Kernel Image";
+ };
+
+ partition@500000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI Compressed RFS Image";
+ };
+
+ partition@900000 {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI JFFS2 RFS";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x1>;
+ };
+ };
+
+ mdio@25520 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ status = "disabled";
+ };
+
+ ptp_clock@24e00 {
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <200>;
+ fsl,tmr-add = <0xCCCCCCCD>;
+ fsl,tmr-fiper1 = <0x3B9AC9FB>;
+ fsl,tmr-fiper2 = <0x0001869B>;
+ fsl,max-adj = <249999999>;
+ };
+
+ enet0: ethernet@24000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@26000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts b/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts
new file mode 100644
index 0000000..852e5b2
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts
@@ -0,0 +1,96 @@
+/*
+ * P2020 RDB-PC 32Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+ model = "fsl,P2020RDB";
+ compatible = "fsl,P2020RDB-PC";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+
+ /* NOR and NAND Flashes */
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xff800000 0x00040000
+ 0x2 0x0 0x0 0xffb00000 0x00020000
+ 0x3 0x0 0x0 0xffa00000 0x00020000>;
+ };
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@ffe08000 {
+ reg = <0 0xffe08000 0 0x1000>;
+ status = "disabled";
+ };
+
+ pci1: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci2: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p2020rdb-pc.dtsi"
+/include/ "fsl/p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts b/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts
new file mode 100644
index 0000000..b5a56ca
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts
@@ -0,0 +1,96 @@
+/*
+ * P2020 RDB-PC 36Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+ model = "fsl,P2020RDB";
+ compatible = "fsl,P2020RDB-PC";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+
+ /* NOR and NAND Flashes */
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xff800000 0x00040000
+ 0x2 0x0 0xf 0xffb00000 0x00020000
+ 0x3 0x0 0xf 0xffa00000 0x00020000>;
+ };
+
+ soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe08000 {
+ reg = <0xf 0xffe08000 0 0x1000>;
+ status = "disabled";
+ };
+
+ pci1: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci2: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p2020rdb-pc.dtsi"
+/include/ "fsl/p2020si-post.dtsi"
--
1.6.4
^ permalink raw reply related
* [PATCH] powerpc/85xx: Add machine check handler to fix PCIe erratum on mpc85xx
From: shuo.liu @ 2012-02-10 8:09 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Zhao Chenhui, Liu Shuo, r61911, Liu Shuo, scottwood
From: Liu Shuo <shuo.liu@freescale.com>
A PCIe erratum of mpc85xx may causes a core hang when a link of PCIe
goes down. when the link goes down, Non-posted transactions issued
via the ATMU requiring completion result in an instruction stall.
At the same time a machine-check exception is generated to the core
to allow further processing by the handler. We implements the handler
which skips the instruction caused the stall.
Signed-off-by: Zhao Chenhui <b35336@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Liu Shuo <b35362@freescale.com>
---
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 2 +-
arch/powerpc/kernel/traps.c | 3 ++
arch/powerpc/sysdev/fsl_pci.c | 36 +++++++++++++++++++++++++++++
arch/powerpc/sysdev/fsl_pci.h | 6 +++++
4 files changed, 46 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 2c03ac2..beef028 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -64,7 +64,7 @@ _GLOBAL(__setup_cpu_e500v2)
bl __e500_icache_setup
bl __e500_dcache_setup
bl __setup_e500_ivors
-#ifdef CONFIG_FSL_RIO
+#if defined(CONFIG_FSL_RIO) || defined(CONFIG_FSL_PCI)
/* Ensure that RFXE is set */
mfspr r3,SPRN_HID1
oris r3,r3,HID1_RFXE@h
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 343c46b..1d6bcc0 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -57,6 +57,7 @@
#include <asm/kexec.h>
#include <asm/ppc-opcode.h>
#include <asm/rio.h>
+#include <sysdev/fsl_pci.h>
#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
int (*__debugger)(struct pt_regs *regs) __read_mostly;
@@ -525,6 +526,8 @@ int machine_check_e500(struct pt_regs *regs)
if (reason & MCSR_BUS_RBERR) {
if (fsl_rio_mcheck_exception(regs))
return 1;
+ if (fsl_pci_mcheck_exception(regs))
+ return 1;
}
printk("Machine check in kernel mode.\n");
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 6bc3bfd..8ea23f0 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -30,6 +30,7 @@
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
#include <asm/machdep.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
@@ -727,3 +728,38 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose)
return 0;
}
+
+static int is_in_pci_mem_space(phys_addr_t addr)
+{
+ struct pci_controller *hose;
+ struct resource *res;
+ int i;
+
+ list_for_each_entry(hose, &hose_list, list_node) {
+ for (i = 0; i < 3; i++) {
+ res = &hose->mem_resources[i];
+ if ((res->flags & IORESOURCE_MEM) &&
+ addr >= res->start && addr <= res->end)
+ return 1;
+ }
+ }
+ return 0;
+}
+
+int fsl_pci_mcheck_exception(struct pt_regs *regs)
+{
+ phys_addr_t addr = 0;
+
+#ifdef CONFIG_PHYS_64BIT
+ addr = mfspr(SPRN_MCARU);
+ addr <<= 32;
+#endif
+ addr += mfspr(SPRN_MCAR);
+
+ if (is_in_pci_mem_space(addr)) {
+ regs->nip += 4;
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index a39ed5c..96b07ce 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -93,5 +93,11 @@ extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
extern int mpc83xx_add_bridge(struct device_node *dev);
u64 fsl_pci_immrbar_base(struct pci_controller *hose);
+#ifdef CONFIG_FSL_PCI
+extern int fsl_pci_mcheck_exception(struct pt_regs *);
+#else
+static inline int fsl_pci_mcheck_exception(struct pt_regs *regs) {return 0; }
+#endif
+
#endif /* __POWERPC_FSL_PCI_H */
#endif /* __KERNEL__ */
--
1.7.1
^ permalink raw reply related
* RE: [PATCH V2] fsl-sata: I/O load balancing
From: Liu Qiang-B32616 @ 2012-02-10 8:51 UTC (permalink / raw)
To: Liu Qiang-B32616, jgarzik@pobox.com, linux-ide@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
In-Reply-To: <1327025958-10605-1-git-send-email-qiang.liu@freescale.com>
Hi Jeff,
Do you have any suggestion about this patch :)
> -----Original Message-----
> From: Liu Qiang-B32616
> Sent: Friday, January 20, 2012 10:19 AM
> To: jgarzik@pobox.com; linux-ide@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org; linuxppc-dev@lists.ozlabs.org; Liu
> Qiang-B32616
> Subject: [PATCH V2] fsl-sata: I/O load balancing
>=20
> From: Qiang Liu <qiang.liu@freescale.com>
>=20
> Reduce interrupt signals through reset Interrupt Coalescing Control Reg.
> Provide dynamic method to adjust interrupt signals and timer ticks by
> sysfs.
> It is a tradeoff for different applications.
>=20
> Signed-off-by: Qiang Liu <qiang.liu@freescale.com>
> ---
>=20
> change for V2
> support dynamic config interrupt coalescing register by /sysfs
> test random small file with iometer
> Description:
> 1. fsl-sata interrupt will be raised 130 thousand times when write 8G
> file
> (dd if=3D/dev/zero of=3D/dev/sda2 bs=3D128K count=3D65536);
> 2. most of interrupts raised because of only 1-4 commands completed;
> 3. only 30 thousand times will be raised after set max interrupt
> threshold,
> more interrupts are coalesced as the description of ICC;
>=20
> Test methods and results:
> 1. test sequential large file performance,
> [root@p2020ds root]# echo 31 524287 > \
> /sys/devices/soc.0/ffe18000.sata/intr_coalescing
> [root@p2020ds root]# dd if=3D/dev/zero of=3D/dev/sda2 bs=3D128K count=
=3D65536 &
> [root@p2020ds root]# top
>=20
> CPU % | dd | flush-8:0 | softirq
> ---------------------------------------
> before | 20-22 | 17-19 | 7
> ---------------------------------------
> after | 18-21 | 15-16 | 5
> ---------------------------------------
> 2. test random small file with iometer, iometer paramters:
> 4 I/Os burst length, 1MB transfer request size, 100% write, 2MB file
> size
> as default configuration of interrupt coalescing register, 1
> interrupts and no timeout config, total write performance is 119MB per
> second,
> after config with the maximum value, write performance is 110MB per
> second.
>=20
> After compare the test results, a configuable interrupt coalescing
> should be
> better when cope with flexible context.
>=20
> drivers/ata/sata_fsl.c | 111
> ++++++++++++++++++++++++++++++++++++++++++++++--
> 1 files changed, 107 insertions(+), 4 deletions(-)
>=20
> diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index
> 3547000..41ca495 100644
> --- a/drivers/ata/sata_fsl.c
> +++ b/drivers/ata/sata_fsl.c
> @@ -6,7 +6,7 @@
> * Author: Ashish Kalra <ashish.kalra@freescale.com>
> * Li Yang <leoli@freescale.com>
> *
> - * Copyright (c) 2006-2007, 2011 Freescale Semiconductor, Inc.
> + * Copyright (c) 2006-2007, 2011-2012 Freescale Semiconductor, Inc.
> *
> * This program is free software; you can redistribute it and/or modify
> it
> * under the terms of the GNU General Public License as published by
> the @@ -26,6 +26,15 @@ #include <asm/io.h> #include
> <linux/of_platform.h>
>=20
> +static unsigned int intr_coalescing_count;
> +module_param(intr_coalescing_count, int, S_IRUGO);
> +MODULE_PARM_DESC(intr_coalescing_count,
> + "INT coalescing count threshold (1..31)");
> +
> +static unsigned int intr_coalescing_ticks;
> +module_param(intr_coalescing_ticks, int, S_IRUGO);
> +MODULE_PARM_DESC(intr_coalescing_ticks,
> + "INT coalescing timer threshold in AHB ticks");
> /* Controller information */
> enum {
> SATA_FSL_QUEUE_DEPTH =3D 16,
> @@ -83,6 +92,16 @@ enum {
> };
>=20
> /*
> + * Interrupt Coalescing Control Register bitdefs */ enum {
> + ICC_MIN_INT_COUNT_THRESHOLD =3D 1,
> + ICC_MAX_INT_COUNT_THRESHOLD =3D ((1 << 5) - 1),
> + ICC_MIN_INT_TICKS_THRESHOLD =3D 0,
> + ICC_MAX_INT_TICKS_THRESHOLD =3D ((1 << 19) - 1),
> + ICC_SAFE_INT_TICKS =3D 1,
> +};
> +
> +/*
> * Host Controller command register set - per port */ enum { @@ -263,9
> +282,66 @@ struct sata_fsl_host_priv {
> int irq;
> int data_snoop;
> u32 quirks;
> + struct device_attribute intr_coalescing;
> #define SATA_FSL_QUIRK_P3P5_ERRATA (1 << 0)
> };
>=20
> +static void fsl_sata_set_irq_coalescing(struct ata_host *host,
> + unsigned int count, unsigned int ticks) {
> + struct sata_fsl_host_priv *host_priv =3D host->private_data;
> + void __iomem *hcr_base =3D host_priv->hcr_base;
> +
> + if (count > ICC_MAX_INT_COUNT_THRESHOLD)
> + count =3D ICC_MAX_INT_COUNT_THRESHOLD;
> + else if (count < ICC_MIN_INT_COUNT_THRESHOLD)
> + count =3D ICC_MIN_INT_COUNT_THRESHOLD;
> +
> + if (ticks > ICC_MAX_INT_TICKS_THRESHOLD)
> + ticks =3D ICC_MAX_INT_TICKS_THRESHOLD;
> + else if ((ICC_MIN_INT_TICKS_THRESHOLD =3D=3D ticks) &&
> + (count > ICC_MIN_INT_COUNT_THRESHOLD))
> + ticks =3D ICC_SAFE_INT_TICKS;
> +
> + spin_lock(&host->lock);
> + iowrite32((count << 24 | ticks), hcr_base + ICC);
> +
> + intr_coalescing_count =3D count;
> + intr_coalescing_ticks =3D ticks;
> + spin_unlock(&host->lock);
> +
> + DPRINTK("intrrupt coalescing, count =3D 0x%x, ticks =3D %x\n",
> + intr_coalescing_count, intr_coalescing_ticks);
> + DPRINTK("ICC register status: (hcr base: 0x%x) =3D 0x%x\n",
> + hcr_base, ioread32(hcr_base + ICC)); }
> +
> +static ssize_t fsl_sata_intr_coalescing_show(struct device *dev,
> + struct device_attribute *attr, char *buf) {
> + return sprintf(buf, "%d %d\n",
> + intr_coalescing_count, intr_coalescing_ticks); }
> +
> +static ssize_t fsl_sata_intr_coalescing_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + unsigned int coalescing_count, coalescing_ticks;
> +
> + if (sscanf(buf, "%d%d",
> + &coalescing_count,
> + &coalescing_ticks) !=3D 2) {
> + printk(KERN_ERR "fsl-sata: wrong parameter format.\n");
> + return -EINVAL;
> + }
> +
> + fsl_sata_set_irq_coalescing(dev_get_drvdata(dev),
> + coalescing_count, coalescing_ticks);
> +
> + return strlen(buf);
> +}
> +
> static void sata_fsl_dev_config(struct ata_device *dev) {
> dev->max_sectors =3D 16;
> @@ -352,11 +428,11 @@ static unsigned int sata_fsl_fill_sg(struct
> ata_queued_cmd *qc, void *cmd_desc,
> (unsigned long long)sg_addr, sg_len);
>=20
> /* warn if each s/g element is not dword aligned */
> - if (sg_addr & 0x03)
> + if (unlikely(sg_addr & 0x03))
> ata_port_printk(qc->ap, KERN_ERR,
> "s/g addr unaligned : 0x%llx\n",
> (unsigned long long)sg_addr);
> - if (sg_len & 0x03)
> + if (unlikely(sg_len & 0x03))
> ata_port_printk(qc->ap, KERN_ERR,
> "s/g len unaligned : 0x%x\n", sg_len);
>=20
> @@ -1305,6 +1381,13 @@ static int sata_fsl_init_controller(struct
> ata_host *host)
> iowrite32(0x00000FFFF, hcr_base + DE);
>=20
> /*
> + * reset the number of command complete bits which will cause the
> + * interrupt to be signaled
> + */
> + fsl_sata_set_irq_coalescing(host, intr_coalescing_count,
> + intr_coalescing_ticks);
> +
> + /*
> * host controller will be brought on-line, during xx_port_start()
> * callback, that should also initiate the OOB, COMINIT sequence
> */
> @@ -1368,7 +1451,7 @@ static int sata_fsl_probe(struct platform_device
> *ofdev)
> void __iomem *csr_base =3D NULL;
> struct sata_fsl_host_priv *host_priv =3D NULL;
> int irq;
> - struct ata_host *host;
> + struct ata_host *host =3D NULL;
> u32 temp;
>=20
> struct ata_port_info pi =3D sata_fsl_port_info[0]; @@ -1430,6
> +1513,10 @@ static int sata_fsl_probe(struct platform_device *ofdev)
>=20
> /* allocate host structure */
> host =3D ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS);
> + if (!host) {
> + retval =3D -ENOMEM;
> + goto error_exit_with_cleanup;
> + }
>=20
> /* host->iomap is not used currently */
> host->private_data =3D host_priv;
> @@ -1447,10 +1534,24 @@ static int sata_fsl_probe(struct platform_device
> *ofdev)
>=20
> dev_set_drvdata(&ofdev->dev, host);
>=20
> + host_priv->intr_coalescing.show =3D fsl_sata_intr_coalescing_show;
> + host_priv->intr_coalescing.store =3D fsl_sata_intr_coalescing_store;
> + sysfs_attr_init(&host_priv->intr_coalescing.attr);
> + host_priv->intr_coalescing.attr.name =3D "intr_coalescing";
> + host_priv->intr_coalescing.attr.mode =3D S_IRUGO | S_IWUSR;
> + retval =3D device_create_file(host->dev, &host_priv->intr_coalescing);
> + if (retval)
> + goto error_exit_with_cleanup;
> +
> return 0;
>=20
> error_exit_with_cleanup:
>=20
> + if (host) {
> + dev_set_drvdata(&ofdev->dev, NULL);
> + ata_host_detach(host);
> + }
> +
> if (hcr_base)
> iounmap(hcr_base);
> if (host_priv)
> @@ -1464,6 +1565,8 @@ static int sata_fsl_remove(struct platform_device
> *ofdev)
> struct ata_host *host =3D dev_get_drvdata(&ofdev->dev);
> struct sata_fsl_host_priv *host_priv =3D host->private_data;
>=20
> + device_remove_file(&ofdev->dev, &host_priv->intr_coalescing);
> +
> ata_host_detach(host);
>=20
> dev_set_drvdata(&ofdev->dev, NULL);
> --
> 1.7.5.1
^ permalink raw reply
* [PATCH v3 2/3] KVM: PPC: epapr: Add idle hcall support for host
From: Liu Yu @ 2012-02-10 10:02 UTC (permalink / raw)
To: agraf, kvm-ppc, kvm; +Cc: linuxppc-dev, Liu Yu, B07421
In-Reply-To: <1328868141-17364-1-git-send-email-yu.liu@freescale.com>
And add a new flag definition in kvm_ppc_pvinfo to indicate
whether host support EV_IDLE hcall.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
---
v3:
no change
arch/powerpc/include/asm/kvm_para.h | 14 ++++++++++++--
arch/powerpc/kvm/powerpc.c | 8 ++++++++
include/linux/kvm.h | 2 ++
3 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h
index 50533f9..e8632b6 100644
--- a/arch/powerpc/include/asm/kvm_para.h
+++ b/arch/powerpc/include/asm/kvm_para.h
@@ -41,9 +41,19 @@ struct kvm_vcpu_arch_shared {
};
#define KVM_SC_MAGIC_R0 0x4b564d21 /* "KVM!" */
-#define HC_VENDOR_KVM (42 << 16)
+
+#include <asm/epapr_hcalls.h>
+
+/* ePAPR Hypercall Vendor ID */
+#define HC_VENDOR_EPAPR (EV_EPAPR_VENDOR_ID << 16)
+#define HC_VENDOR_KVM (EV_KVM_VENDOR_ID << 16)
+
+/* ePAPR Hypercall Token */
+#define HC_EV_IDLE EV_IDLE
+
+/* ePAPR Hypercall Return Codes */
#define HC_EV_SUCCESS 0
-#define HC_EV_UNIMPLEMENTED 12
+#define HC_EV_UNIMPLEMENTED EV_UNIMPLEMENTED
#define KVM_FEATURE_MAGIC_PAGE 1
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index c33f6a7..1242ee1 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -81,6 +81,10 @@ int kvmppc_kvm_pv(struct kvm_vcpu *vcpu)
/* Second return value is in r4 */
break;
+ case HC_VENDOR_EPAPR | HC_EV_IDLE:
+ r = HC_EV_SUCCESS;
+ kvm_vcpu_block(vcpu);
+ break;
default:
r = HC_EV_UNIMPLEMENTED;
break;
@@ -772,6 +776,10 @@ static int kvm_vm_ioctl_get_pvinfo(struct kvm_ppc_pvinfo *pvinfo)
pvinfo->hcall[2] = inst_sc;
pvinfo->hcall[3] = inst_nop;
+#ifdef CONFIG_BOOKE
+ pvinfo->flags |= KVM_PPC_PVINFO_FLAGS_EV_IDLE;
+#endif
+
return 0;
}
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index c107fae..501712d 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -429,6 +429,8 @@ struct kvm_ppc_pvinfo {
__u8 pad[108];
};
+#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0)
+
#define KVMIO 0xAE
/*
--
1.7.0.4
^ permalink raw reply related
* [PATCH v3 1/3] KVM: PPC: epapr: Factor out the epapr init
From: Liu Yu @ 2012-02-10 10:02 UTC (permalink / raw)
To: agraf, kvm-ppc, kvm; +Cc: linuxppc-dev, Liu Yu, B07421
from the kvm guest paravirt init code.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
---
v3:
apply the epapr init for all ppc platform
arch/powerpc/Kconfig | 4 +++
arch/powerpc/include/asm/epapr_hcalls.h | 8 +++++
arch/powerpc/kernel/Makefile | 1 +
arch/powerpc/kernel/epapr_para.c | 46 +++++++++++++++++++++++++++++++
arch/powerpc/kernel/kvm.c | 13 +++------
arch/powerpc/kvm/Kconfig | 1 +
6 files changed, 64 insertions(+), 9 deletions(-)
create mode 100644 arch/powerpc/kernel/epapr_para.c
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 47682b6..00bd508 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -196,6 +196,10 @@ config EPAPR_BOOT
Used to allow a board to specify it wants an ePAPR compliant wrapper.
default n
+config EPAPR_PARA
+ bool
+ default n
+
config DEFAULT_UIMAGE
bool
help
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index f3b0c2c..c4b86e4 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -148,6 +148,14 @@
#define EV_HCALL_CLOBBERS2 EV_HCALL_CLOBBERS3, "r5"
#define EV_HCALL_CLOBBERS1 EV_HCALL_CLOBBERS2, "r4"
+extern u32 *epapr_hcall_insts;
+extern int epapr_hcall_insts_len;
+
+static inline void epapr_get_hcall_insts(u32 **instp, int *lenp)
+{
+ *instp = epapr_hcall_insts;
+ *lenp = epapr_hcall_insts_len;
+}
/*
* We use "uintptr_t" to define a register because it's guaranteed to be a
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index ce4f7f1..1e41c76 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -134,6 +134,7 @@ ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
obj-y += ppc_save_regs.o
endif
+obj-$(CONFIG_EPAPR_PARA) += epapr_para.o
obj-$(CONFIG_KVM_GUEST) += kvm.o kvm_emul.o
# Disable GCOV in odd or sensitive code
diff --git a/arch/powerpc/kernel/epapr_para.c b/arch/powerpc/kernel/epapr_para.c
new file mode 100644
index 0000000..7e1561a
--- /dev/null
+++ b/arch/powerpc/kernel/epapr_para.c
@@ -0,0 +1,46 @@
+/*
+ * ePAPR para-virtualization support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/of.h>
+#include <asm/epapr_hcalls.h>
+#include <asm/cacheflush.h>
+
+u32 *epapr_hcall_insts;
+int epapr_hcall_insts_len;
+
+static int __init epapr_para_init(void)
+{
+ struct device_node *hyper_node;
+ u32 *insts;
+ int len;
+
+ hyper_node = of_find_node_by_path("/hypervisor");
+ if (!hyper_node)
+ return -ENODEV;
+
+ insts = (u32*)of_get_property(hyper_node, "hcall-instructions", &len);
+ if (!(len % 4) && (len >= (4 * 4))) {
+ epapr_hcall_insts = insts;
+ epapr_hcall_insts_len = len;
+ }
+
+ return 0;
+}
+
+early_initcall(epapr_para_init);
diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c
index b06bdae..2e03ab8 100644
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -28,6 +28,7 @@
#include <asm/sections.h>
#include <asm/cacheflush.h>
#include <asm/disassemble.h>
+#include <asm/epapr_hcalls.h>
#define KVM_MAGIC_PAGE (-4096L)
#define magic_var(x) KVM_MAGIC_PAGE + offsetof(struct kvm_vcpu_arch_shared, x)
@@ -535,18 +536,12 @@ EXPORT_SYMBOL_GPL(kvm_hypercall);
static int kvm_para_setup(void)
{
extern u32 kvm_hypercall_start;
- struct device_node *hyper_node;
u32 *insts;
int len, i;
- hyper_node = of_find_node_by_path("/hypervisor");
- if (!hyper_node)
- return -1;
-
- insts = (u32*)of_get_property(hyper_node, "hcall-instructions", &len);
- if (len % 4)
- return -1;
- if (len > (4 * 4))
+ insts = epapr_hcall_insts;
+ len = epapr_hcall_insts_len;
+ if (insts == NULL)
return -1;
for (i = 0; i < (len / 4); i++)
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 78133de..cd1ee68 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -20,6 +20,7 @@ config KVM
bool
select PREEMPT_NOTIFIERS
select ANON_INODES
+ select EPAPR_PARA
config KVM_BOOK3S_HANDLER
bool
--
1.7.0.4
^ permalink raw reply related
* [PATCH v3 3/3] KVM: PPC: epapr: install ev_idle hcall for e500 guest
From: Liu Yu @ 2012-02-10 10:02 UTC (permalink / raw)
To: agraf, kvm-ppc, kvm; +Cc: linuxppc-dev, Liu Yu, B07421
In-Reply-To: <1328868141-17364-2-git-send-email-yu.liu@freescale.com>
If the guest hypervisor node contains "has-idle" property.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
---
v3:
1. apply the hcall idle for all ppc platform
2. add a loop to prevent spurious wakeups
arch/powerpc/kernel/Makefile | 2 +-
arch/powerpc/kernel/epapr.S | 47 ++++++++++++++++++++++++++++++++++++++
arch/powerpc/kernel/epapr_para.c | 14 ++++++++++-
3 files changed, 61 insertions(+), 2 deletions(-)
create mode 100644 arch/powerpc/kernel/epapr.S
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 1e41c76..65e24be 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -134,7 +134,7 @@ ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
obj-y += ppc_save_regs.o
endif
-obj-$(CONFIG_EPAPR_PARA) += epapr_para.o
+obj-$(CONFIG_EPAPR_PARA) += epapr_para.o epapr.o
obj-$(CONFIG_KVM_GUEST) += kvm.o kvm_emul.o
# Disable GCOV in odd or sensitive code
diff --git a/arch/powerpc/kernel/epapr.S b/arch/powerpc/kernel/epapr.S
new file mode 100644
index 0000000..34cc54f
--- /dev/null
+++ b/arch/powerpc/kernel/epapr.S
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+#define HC_VENDOR_EPAPR (1 << 16)
+#define HC_EV_IDLE 16
+
+_GLOBAL(epapr_ev_idle)
+epapr_ev_idle:
+#ifdef CONFIG_E500
+ rlwinm r3,r1,0,0,31-THREAD_SHIFT /* current thread_info */
+ lwz r4,TI_LOCAL_FLAGS(r3) /* set napping bit */
+ ori r4,r4,_TLF_NAPPING /* so when we take an exception */
+ stw r4,TI_LOCAL_FLAGS(r3) /* it will return to our caller */
+#endif
+ wrteei 1
+
+idle_loop:
+ LOAD_REG_IMMEDIATE(r11, HC_VENDOR_EPAPR | HC_EV_IDLE)
+
+/* Hypercall entry point. Will be patched with device tree instructions. */
+.global epapr_hypercall_start
+epapr_hypercall_start:
+ li r3, -1
+ nop
+ nop
+ nop
+
+ /*
+ * Guard against spurious wakeups (e.g. from a hypervisor) --
+ * any real interrupt will cause us to return to LR due to
+ * _TLF_NAPPING.
+ */
+ b idle_loop
diff --git a/arch/powerpc/kernel/epapr_para.c b/arch/powerpc/kernel/epapr_para.c
index 7e1561a..ff8fb78 100644
--- a/arch/powerpc/kernel/epapr_para.c
+++ b/arch/powerpc/kernel/epapr_para.c
@@ -20,6 +20,10 @@
#include <linux/of.h>
#include <asm/epapr_hcalls.h>
#include <asm/cacheflush.h>
+#include <asm/machdep.h>
+
+extern void epapr_ev_idle(void);
+extern u32 epapr_hypercall_start[];
u32 *epapr_hcall_insts;
int epapr_hcall_insts_len;
@@ -28,7 +32,7 @@ static int __init epapr_para_init(void)
{
struct device_node *hyper_node;
u32 *insts;
- int len;
+ int len, i;
hyper_node = of_find_node_by_path("/hypervisor");
if (!hyper_node)
@@ -38,8 +42,16 @@ static int __init epapr_para_init(void)
if (!(len % 4) && (len >= (4 * 4))) {
epapr_hcall_insts = insts;
epapr_hcall_insts_len = len;
+
+ for (i = 0; i < (len / 4); i++)
+ epapr_hypercall_start[i] = insts[i];
+ flush_icache_range((ulong)epapr_hypercall_start,
+ (ulong)epapr_hypercall_start + len);
}
+ if (of_get_property(hyper_node, "has-idle", NULL))
+ ppc_md.power_save = epapr_ev_idle;
+
return 0;
}
--
1.7.0.4
^ permalink raw reply related
* [PATCH 1/2 v3] powerpc/85xx: Add p1025rdb platform support
From: Zhicheng Fan @ 2012-02-10 10:18 UTC (permalink / raw)
To: linuxppc-dev, galak; +Cc: Zhicheng Fan
From: Zhicheng Fan <b32736@freescale.com>
Signed-off-by: Zhicheng Fan <b32736@freescale.com>
---
arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 22 ++++++++++++++++++++++
1 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index d54772e..e95aef7 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -91,6 +91,7 @@ static void __init mpc85xx_rdb_setup_arch(void)
machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
+machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
@@ -120,6 +121,13 @@ static int __init p1020_rdb_probe(void)
return 0;
}
+static int __init p1025_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1025RDB");
+}
+
define_machine(p2020_rdb) {
.name = "P2020 RDB",
.probe = p2020_rdb_probe,
@@ -161,3 +169,17 @@ define_machine(p1020_rdb_pc) {
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
+
+define_machine(p1025_rdb) {
+ .name = "P1025 RDB",
+ .probe = p1025_rdb_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
--
1.7.0.4
^ permalink raw reply related
* [PATCH 2/2 v3] powerpc/dts: Add dts for p1025rdb board
From: Zhicheng Fan @ 2012-02-10 10:18 UTC (permalink / raw)
To: linuxppc-dev, galak; +Cc: Zhicheng Fan
In-Reply-To: <1328869096-23994-1-git-send-email-B32736@freescale.com>
From: Zhicheng Fan <b32736@freescale.com>
P1025RDB Overview
------------------
1Gbyte DDR3 SDRAM
32 Mbyte NAND flash
16Mbyte NOR flash
16 Mbyte SPI flash
SD connector to interface with the SD memory card
Real-time clock on I2C bus
PCIe:
- x1 PCIe slot
- x1 mini-PCIe slot
10/100/1000 BaseT Ethernet ports:
- eTSEC1, RGMII: one 10/100/1000 port using AtherosTM AR8021
- eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221
- eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021
USB 2.0 port:
- Two USB2.0 Type A receptacles
- One USB2.0 signal to Mini PCIe slot
Dual RJ45 UART ports:
- DUART interface: supports two UARTs up to 115200 bps for console display
Signed-off-by: Zhicheng Fan <b32736@freescale.com>
---
arch/powerpc/boot/dts/p1025rdb.dtsi | 286 ++++++++++++++++++++++++++++++++
arch/powerpc/boot/dts/p1025rdb_32b.dts | 137 +++++++++++++++
arch/powerpc/boot/dts/p1025rdb_36b.dts | 88 ++++++++++
3 files changed, 511 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1025rdb.dtsi
create mode 100644 arch/powerpc/boot/dts/p1025rdb_32b.dts
create mode 100644 arch/powerpc/boot/dts/p1025rdb_36b.dts
diff --git a/arch/powerpc/boot/dts/p1025rdb.dtsi b/arch/powerpc/boot/dts/p1025rdb.dtsi
new file mode 100644
index 0000000..cf3676f
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1025rdb.dtsi
@@ -0,0 +1,286 @@
+/*
+ * P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1025-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND Writable User area";
+ };
+ };
+
+};
+
+&soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+
+ partition@u-boot {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@dtb {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "dtb";
+ };
+
+ partition@kernel {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "kernel";
+ };
+
+ partition@fs {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "file system";
+ };
+
+ partition@jffs-fs {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "file system jffs2";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
+ usb@23000 {
+ phy_type = "ulpi";
+ };
+ */
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ par_io@e0100 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xe0100 0x60>;
+ ranges = <0x0 0xe0100 0x60>;
+ device_type = "par_io";
+ num-ports = <3>;
+ pio1: ucc_pin@01 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
+ 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
+ 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
+ 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
+ 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
+ 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
+ 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
+ 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
+ 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
+ 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
+ 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
+ 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
+ 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
+ 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
+ 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
+ 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
+ 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
+ };
+
+ pio2: ucc_pin@02 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
+ 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
+ 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
+ 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
+ 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
+ 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
+ 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
+ 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
+ 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1025rdb_32b.dts b/arch/powerpc/boot/dts/p1025rdb_32b.dts
new file mode 100644
index 0000000..b0ffc13
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1025rdb_32b.dts
@@ -0,0 +1,137 @@
+/*
+ * P1025 RDB Device Tree Source (32-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+ model = "fsl,P1025RDB";
+ compatible = "fsl,P1025RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+
+ /* NOR, NAND Flashes */
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xff800000 0x00040000>;
+ };
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@ffe09000 {
+ ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ reg = <0 0xffe09000 0 0x1000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ qe: qe@ffe80000 {
+ ranges = <0x0 0x0 0xffe80000 0x40000>;
+ reg = <0 0xffe80000 0 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+ status = "disabled"; /* no firmware loaded */
+
+ enet3: ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ rx-clock-name = "clk12";
+ tx-clock-name = "clk9";
+ pio-handle = <&pio1>;
+ phy-handle = <&qe_phy0>;
+ phy-connection-type = "mii";
+ };
+
+ mdio@2120 {
+ qe_phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <4 1 0 0>;
+ reg = <0x6>;
+ device_type = "ethernet-phy";
+ };
+ qe_phy1: ethernet-phy@03 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1 0 0>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet4: ucc@2400 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ rx-clock-name = "none";
+ tx-clock-name = "clk13";
+ pio-handle = <&pio2>;
+ phy-handle = <&qe_phy1>;
+ phy-connection-type = "rmii";
+ };
+ };
+};
+
+/include/ "p1025rdb.dtsi"
+/include/ "fsl/p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1025rdb_36b.dts b/arch/powerpc/boot/dts/p1025rdb_36b.dts
new file mode 100644
index 0000000..4ce4bfa
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1025rdb_36b.dts
@@ -0,0 +1,88 @@
+/*
+ * P1025 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+ model = "fsl,P1025RDB";
+ compatible = "fsl,P1025RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+
+ /* NOR, NAND Flashes */
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xff800000 0x00040000>;
+ };
+
+ soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1025rdb.dtsi"
+/include/ "fsl/p1021si-post.dtsi"
--
1.7.0.4
^ permalink raw reply related
* Re: [PATCH V2] fsl-sata: I/O load balancing
From: Jeff Garzik @ 2012-02-10 18:26 UTC (permalink / raw)
To: qiang.liu; +Cc: linux-ide, linuxppc-dev, linux-kernel
In-Reply-To: <1327025958-10605-1-git-send-email-qiang.liu@freescale.com>
On 01/19/2012 09:19 PM, qiang.liu@freescale.com wrote:
> From: Qiang Liu<qiang.liu@freescale.com>
>
> Reduce interrupt signals through reset Interrupt Coalescing Control Reg.
> Provide dynamic method to adjust interrupt signals and timer ticks by sysfs.
> It is a tradeoff for different applications.
>
> Signed-off-by: Qiang Liu<qiang.liu@freescale.com>
> ---
>
> change for V2
> support dynamic config interrupt coalescing register by /sysfs
> test random small file with iometer
> Description:
> 1. fsl-sata interrupt will be raised 130 thousand times when write 8G file
> (dd if=/dev/zero of=/dev/sda2 bs=128K count=65536);
> 2. most of interrupts raised because of only 1-4 commands completed;
> 3. only 30 thousand times will be raised after set max interrupt threshold,
> more interrupts are coalesced as the description of ICC;
>
> Test methods and results:
> 1. test sequential large file performance,
> [root@p2020ds root]# echo 31 524287> \
> /sys/devices/soc.0/ffe18000.sata/intr_coalescing
> [root@p2020ds root]# dd if=/dev/zero of=/dev/sda2 bs=128K count=65536&
> [root@p2020ds root]# top
>
> CPU % | dd | flush-8:0 | softirq
> ---------------------------------------
> before | 20-22 | 17-19 | 7
> ---------------------------------------
> after | 18-21 | 15-16 | 5
> ---------------------------------------
> 2. test random small file with iometer,
> iometer paramters:
> 4 I/Os burst length, 1MB transfer request size, 100% write, 2MB file size
> as default configuration of interrupt coalescing register, 1 interrupts and
> no timeout config, total write performance is 119MB per second,
> after config with the maximum value, write performance is 110MB per second.
>
> After compare the test results, a configuable interrupt coalescing should be
> better when cope with flexible context.
>
> drivers/ata/sata_fsl.c | 111 ++++++++++++++++++++++++++++++++++++++++++++++--
> 1 files changed, 107 insertions(+), 4 deletions(-)
Doesn't seem to apply to upstream, or another less recent -rc...
Jeff
^ permalink raw reply
* [PULL REQUEST] DMA-mapping framework redesign preparation patches
From: Marek Szyprowski @ 2012-02-10 18:32 UTC (permalink / raw)
To: Stephen Rothwell
Cc: linux-mips, linux-ia64, linux-sh, linux-mm, sparclinux,
Marek Szyprowski, linux-arch, Jonathan Corbet, x86, linux-next,
Arnd Bergmann, microblaze-uclinux, linaro-mm-sig,
Andrzej Pietrasiewicz, Thomas Gleixner, linux-arm-kernel, discuss,
linux-kernel, FUJITA Tomonori, Kyungmin Park, linux-alpha,
Andrew Morton, linuxppc-dev
Hi Stephen,
Our patches with DMA-mapping framework redesign proposal have been
hanging for over a month with just a few comments. We would like to go
further in the development, but first I would like to ask You to give
them a try in the linux-next kernel.
For everyone interested in this patch series, here is the relevant
thread: https://lkml.org/lkml/2011/12/23/97
If there are any problems with our git tree, please contact Marek
Szyprowski <m.szyprowski@samsung.com> or alternatively Kyungmin Park
<kyungmin.park@samsung.com>.
The following changes since commit 62aa2b537c6f5957afd98e29f96897419ed5ebab:
Linux 3.3-rc2 (2012-01-31 13:31:54 -0800)
are available in the git repository at:
git://git.infradead.org/users/kmpark/linux-samsung dma-mapping-next
Andrzej Pietrasiewicz (9):
X86: adapt for dma_map_ops changes
MIPS: adapt for dma_map_ops changes
PowerPC: adapt for dma_map_ops changes
IA64: adapt for dma_map_ops changes
SPARC: adapt for dma_map_ops changes
Alpha: adapt for dma_map_ops changes
SH: adapt for dma_map_ops changes
Microblaze: adapt for dma_map_ops changes
Unicore32: adapt for dma_map_ops changes
Marek Szyprowski (5):
common: dma-mapping: introduce alloc_attrs and free_attrs methods
common: dma-mapping: remove old alloc_coherent and free_coherent methods
common: dma-mapping: introduce mmap method
common: DMA-mapping: add WRITE_COMBINE attribute
common: DMA-mapping: add NON-CONSISTENT attribute
Documentation/DMA-attributes.txt | 19 +++++++++++++++++++
arch/alpha/include/asm/dma-mapping.h | 18 ++++++++++++------
arch/alpha/kernel/pci-noop.c | 10 ++++++----
arch/alpha/kernel/pci_iommu.c | 10 ++++++----
arch/ia64/hp/common/sba_iommu.c | 11 ++++++-----
arch/ia64/include/asm/dma-mapping.h | 18 ++++++++++++------
arch/ia64/kernel/pci-swiotlb.c | 9 +++++----
arch/ia64/sn/pci/pci_dma.c | 9 +++++----
arch/microblaze/include/asm/dma-mapping.h | 18 ++++++++++++------
arch/microblaze/kernel/dma.c | 10 ++++++----
arch/mips/include/asm/dma-mapping.h | 18 ++++++++++++------
arch/mips/mm/dma-default.c | 8 ++++----
arch/powerpc/include/asm/dma-mapping.h | 24 ++++++++++++++++--------
arch/powerpc/kernel/dma-iommu.c | 10 ++++++----
arch/powerpc/kernel/dma-swiotlb.c | 4 ++--
arch/powerpc/kernel/dma.c | 10 ++++++----
arch/powerpc/kernel/ibmebus.c | 10 ++++++----
arch/powerpc/platforms/cell/iommu.c | 16 +++++++++-------
arch/powerpc/platforms/ps3/system-bus.c | 13 +++++++------
arch/sh/include/asm/dma-mapping.h | 28 ++++++++++++++++++----------
arch/sh/kernel/dma-nommu.c | 4 ++--
arch/sh/mm/consistent.c | 6 ++++--
arch/sparc/include/asm/dma-mapping.h | 18 ++++++++++++------
arch/sparc/kernel/iommu.c | 10 ++++++----
arch/sparc/kernel/ioport.c | 18 ++++++++++--------
arch/sparc/kernel/pci_sun4v.c | 9 +++++----
arch/unicore32/include/asm/dma-mapping.h | 18 ++++++++++++------
arch/unicore32/mm/dma-swiotlb.c | 4 ++--
arch/x86/include/asm/dma-mapping.h | 26 ++++++++++++++++----------
arch/x86/kernel/amd_gart_64.c | 11 ++++++-----
arch/x86/kernel/pci-calgary_64.c | 9 +++++----
arch/x86/kernel/pci-dma.c | 3 ++-
arch/x86/kernel/pci-nommu.c | 6 +++---
arch/x86/kernel/pci-swiotlb.c | 12 +++++++-----
arch/x86/xen/pci-swiotlb-xen.c | 4 ++--
drivers/iommu/amd_iommu.c | 10 ++++++----
drivers/iommu/intel-iommu.c | 9 +++++----
drivers/xen/swiotlb-xen.c | 5 +++--
include/linux/dma-attrs.h | 2 ++
include/linux/dma-mapping.h | 13 +++++++++----
include/linux/swiotlb.h | 6 ++++--
include/xen/swiotlb-xen.h | 6 ++++--
lib/swiotlb.c | 5 +++--
43 files changed, 305 insertions(+), 182 deletions(-)
Best regards
Marek Szyprowski
Samsung Poland R&D Center
^ permalink raw reply
* Re: [PATCH v3 1/3] KVM: PPC: epapr: Factor out the epapr init
From: Scott Wood @ 2012-02-10 18:39 UTC (permalink / raw)
To: Liu Yu; +Cc: linuxppc-dev, B07421, agraf, kvm-ppc, kvm
In-Reply-To: <1328868141-17364-1-git-send-email-yu.liu@freescale.com>
On 02/10/2012 04:02 AM, Liu Yu wrote:
> from the kvm guest paravirt init code.
>
> Signed-off-by: Liu Yu <yu.liu@freescale.com>
> ---
> v3:
> apply the epapr init for all ppc platform
>
> arch/powerpc/Kconfig | 4 +++
> arch/powerpc/include/asm/epapr_hcalls.h | 8 +++++
> arch/powerpc/kernel/Makefile | 1 +
> arch/powerpc/kernel/epapr_para.c | 46 +++++++++++++++++++++++++++++++
> arch/powerpc/kernel/kvm.c | 13 +++------
> arch/powerpc/kvm/Kconfig | 1 +
> 6 files changed, 64 insertions(+), 9 deletions(-)
> create mode 100644 arch/powerpc/kernel/epapr_para.c
>
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 47682b6..00bd508 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -196,6 +196,10 @@ config EPAPR_BOOT
> Used to allow a board to specify it wants an ePAPR compliant wrapper.
> default n
>
> +config EPAPR_PARA
> + bool
> + default n
EPAPR_PARAVIRT
> config DEFAULT_UIMAGE
> bool
> help
> diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
> index f3b0c2c..c4b86e4 100644
> --- a/arch/powerpc/include/asm/epapr_hcalls.h
> +++ b/arch/powerpc/include/asm/epapr_hcalls.h
> @@ -148,6 +148,14 @@
> #define EV_HCALL_CLOBBERS2 EV_HCALL_CLOBBERS3, "r5"
> #define EV_HCALL_CLOBBERS1 EV_HCALL_CLOBBERS2, "r4"
>
> +extern u32 *epapr_hcall_insts;
> +extern int epapr_hcall_insts_len;
> +
> +static inline void epapr_get_hcall_insts(u32 **instp, int *lenp)
> +{
> + *instp = epapr_hcall_insts;
> + *lenp = epapr_hcall_insts_len;
> +}
Why do we need a function for this? Why is the public interface
anything other than "invoke a hypercall"?
> +static int __init epapr_para_init(void)
> +{
> + struct device_node *hyper_node;
> + u32 *insts;
> + int len;
> +
> + hyper_node = of_find_node_by_path("/hypervisor");
> + if (!hyper_node)
> + return -ENODEV;
> +
> + insts = (u32*)of_get_property(hyper_node, "hcall-instructions", &len);
Do not cast away that const.
> @@ -535,18 +536,12 @@ EXPORT_SYMBOL_GPL(kvm_hypercall);
> static int kvm_para_setup(void)
> {
> extern u32 kvm_hypercall_start;
> - struct device_node *hyper_node;
> u32 *insts;
> int len, i;
>
> - hyper_node = of_find_node_by_path("/hypervisor");
> - if (!hyper_node)
> - return -1;
> -
> - insts = (u32*)of_get_property(hyper_node, "hcall-instructions", &len);
> - if (len % 4)
> - return -1;
> - if (len > (4 * 4))
> + insts = epapr_hcall_insts;
> + len = epapr_hcall_insts_len;
> + if (insts == NULL)
> return -1;
>
> for (i = 0; i < (len / 4); i++)
Why are you still doing the patching inside kvm.c?
-Scott
^ permalink raw reply
* Re: [PATCH v3 3/3] KVM: PPC: epapr: install ev_idle hcall for e500 guest
From: Scott Wood @ 2012-02-10 18:41 UTC (permalink / raw)
To: Liu Yu; +Cc: linuxppc-dev, B07421, agraf, kvm-ppc, kvm
In-Reply-To: <1328868141-17364-3-git-send-email-yu.liu@freescale.com>
On 02/10/2012 04:02 AM, Liu Yu wrote:
> +_GLOBAL(epapr_ev_idle)
> +epapr_ev_idle:
> +#ifdef CONFIG_E500
> + rlwinm r3,r1,0,0,31-THREAD_SHIFT /* current thread_info */
> + lwz r4,TI_LOCAL_FLAGS(r3) /* set napping bit */
> + ori r4,r4,_TLF_NAPPING /* so when we take an exception */
> + stw r4,TI_LOCAL_FLAGS(r3) /* it will return to our caller */
> +#endif
> + wrteei 1
On what hardware would you not need to use _TLF_NAPPING?
-Scott
^ permalink raw reply
* Re: tlb flushing on Power
From: Seth Jennings @ 2012-02-10 19:14 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Brian King, Robert Jennings, linuxppc-dev, Nitin Gupta,
Dave Hansen
In-Reply-To: <1328735054.2903.29.camel@pasglop>
On 02/08/2012 03:04 PM, Benjamin Herrenschmidt wrote:
>
>> You can look at https://lkml.org/lkml/2012/1/9/389 in zsmalloc-main.c,
>> zs_[un]map_object() functions for the currently uses of set_pte() and
>> __flush_tlb_one().
>>
>>> set_pte() is long gone on all archs really (or if it's still there it's
>>> not meant to be used as is), use set_pte_at().
>>
>> Problem with set_pte_at() for us is that we don't have an mm_struct to pass
>> because the mapping is not for a userspace process but for the kernel itself.
>
> Then use init_mm
Thanks, that's what I was looking for.
>> However, I do think this is the portable function we need to be using. Just
>> need to figure out what to pass in for the mm_struct param.
>>
>>> __flush_tlb_one() doesn't mean anything as an arch independent
>>> functionality. We have a local_flush_tlb_page() that -might- do what you
>>> want but why in hell is that patch not using proper existing
>>> interfaces ?
>>
>> flush_tlb_page() is the portable function we should be using. However,
>> again, it requires a vma_area_struct. I'm not sure what we should be
>> passing there.
>
> Do you need this to be CPU local flush or global ? In the later,
> flush_tlb_kernel_range() is the right API.
>
> If you want per-cpu, we'll have to add a new arch hook.
We have interrupts disabled, due to the get_cpu_var() on the percpu variable
zs_map_area in zs_map_object(), while the allocation is mapped. So a CPU local
would be what we need.
--
Seth
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox