* [PATCH 45/69] TTY: hvsi, sanitize uses of tty
From: Jiri Slaby @ 2012-04-02 11:54 UTC (permalink / raw)
To: gregkh; +Cc: jirislaby, linuxppc-dev, linux-kernel, alan
In-Reply-To: <1333367693-3244-1-git-send-email-jslaby@suse.cz>
- use tty, not hp->tty wherever possible
- pass tty down to some functions and go to step one
- do not defer tty_hangup calls -- it is as simple as schedule_work,
so might be called with hp->lock held
- do not defer tty buffer flips -- since the driver does not use
low_latency (it cannot actually), the flip is a simple tail move
plus schedule_work. It will make our life easier in the next patch.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: linuxppc-dev@lists.ozlabs.org
---
drivers/tty/hvc/hvsi.c | 88 +++++++++++++++++-------------------------------
1 file changed, 30 insertions(+), 58 deletions(-)
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 113a09a..68b729b 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -237,7 +237,7 @@ static int hvsi_read(struct hvsi_struct *hp, char *buf, int count)
}
static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet,
- struct tty_struct **to_hangup, struct hvsi_struct **to_handshake)
+ struct tty_struct *tty, struct hvsi_struct **to_handshake)
{
struct hvsi_control *header = (struct hvsi_control *)packet;
@@ -247,9 +247,8 @@ static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet,
/* CD went away; no more connection */
pr_debug("hvsi%i: CD dropped\n", hp->index);
hp->mctrl &= TIOCM_CD;
- /* If userland hasn't done an open(2) yet, hp->tty is NULL. */
- if (hp->tty && !C_CLOCAL(hp->tty))
- *to_hangup = hp->tty;
+ if (tty && !C_CLOCAL(tty))
+ tty_hangup(tty);
}
break;
case VSV_CLOSE_PROTOCOL:
@@ -331,7 +330,8 @@ static void hvsi_recv_query(struct hvsi_struct *hp, uint8_t *packet)
}
}
-static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len)
+static void hvsi_insert_chars(struct hvsi_struct *hp, struct tty_struct *tty,
+ const char *buf, int len)
{
int i;
@@ -347,7 +347,7 @@ static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len)
continue;
}
#endif /* CONFIG_MAGIC_SYSRQ */
- tty_insert_flip_char(hp->tty, c, 0);
+ tty_insert_flip_char(tty, c, 0);
}
}
@@ -360,7 +360,7 @@ static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len)
* revisited.
*/
#define TTY_THRESHOLD_THROTTLE 128
-static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
+static bool hvsi_recv_data(struct hvsi_struct *hp, struct tty_struct *tty,
const uint8_t *packet)
{
const struct hvsi_header *header = (const struct hvsi_header *)packet;
@@ -371,14 +371,14 @@ static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
pr_debug("queueing %i chars '%.*s'\n", datalen, datalen, data);
if (datalen == 0)
- return NULL;
+ return false;
if (overflow > 0) {
pr_debug("%s: got >TTY_THRESHOLD_THROTTLE bytes\n", __func__);
datalen = TTY_THRESHOLD_THROTTLE;
}
- hvsi_insert_chars(hp, data, datalen);
+ hvsi_insert_chars(hp, tty, data, datalen);
if (overflow > 0) {
/*
@@ -390,7 +390,7 @@ static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
hp->n_throttle = overflow;
}
- return hp->tty;
+ return true;
}
/*
@@ -399,14 +399,13 @@ static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
* machine during console handshaking (in which case tty = NULL and we ignore
* incoming data).
*/
-static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
- struct tty_struct **hangup, struct hvsi_struct **handshake)
+static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct *tty,
+ struct hvsi_struct **handshake)
{
uint8_t *packet = hp->inbuf;
int chunklen;
+ bool flip = false;
- *flip = NULL;
- *hangup = NULL;
*handshake = NULL;
chunklen = hvsi_read(hp, hp->inbuf_end, HVSI_MAX_READ);
@@ -440,12 +439,12 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
case VS_DATA_PACKET_HEADER:
if (!is_open(hp))
break;
- if (hp->tty == NULL)
+ if (tty == NULL)
break; /* no tty buffer to put data in */
- *flip = hvsi_recv_data(hp, packet);
+ flip = hvsi_recv_data(hp, tty, packet);
break;
case VS_CONTROL_PACKET_HEADER:
- hvsi_recv_control(hp, packet, hangup, handshake);
+ hvsi_recv_control(hp, packet, tty, handshake);
break;
case VS_QUERY_RESPONSE_PACKET_HEADER:
hvsi_recv_response(hp, packet);
@@ -462,28 +461,26 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
packet += len_packet(packet);
- if (*hangup || *handshake) {
- pr_debug("%s: hangup or handshake\n", __func__);
- /*
- * we need to send the hangup now before receiving any more data.
- * If we get "data, hangup, data", we can't deliver the second
- * data before the hangup.
- */
+ if (*handshake) {
+ pr_debug("%s: handshake\n", __func__);
break;
}
}
compact_inbuf(hp, packet);
+ if (flip)
+ tty_flip_buffer_push(tty);
+
return 1;
}
-static void hvsi_send_overflow(struct hvsi_struct *hp)
+static void hvsi_send_overflow(struct hvsi_struct *hp, struct tty_struct *tty)
{
pr_debug("%s: delivering %i bytes overflow\n", __func__,
hp->n_throttle);
- hvsi_insert_chars(hp, hp->throttle_buf, hp->n_throttle);
+ hvsi_insert_chars(hp, tty, hp->throttle_buf, hp->n_throttle);
hp->n_throttle = 0;
}
@@ -494,8 +491,6 @@ static void hvsi_send_overflow(struct hvsi_struct *hp)
static irqreturn_t hvsi_interrupt(int irq, void *arg)
{
struct hvsi_struct *hp = (struct hvsi_struct *)arg;
- struct tty_struct *flip;
- struct tty_struct *hangup;
struct hvsi_struct *handshake;
unsigned long flags;
int again = 1;
@@ -504,25 +499,9 @@ static irqreturn_t hvsi_interrupt(int irq, void *arg)
while (again) {
spin_lock_irqsave(&hp->lock, flags);
- again = hvsi_load_chunk(hp, &flip, &hangup, &handshake);
+ again = hvsi_load_chunk(hp, hp->tty, &handshake);
spin_unlock_irqrestore(&hp->lock, flags);
- /*
- * we have to call tty_flip_buffer_push() and tty_hangup() outside our
- * spinlock. But we also have to keep going until we've read all the
- * available data.
- */
-
- if (flip) {
- /* there was data put in the tty flip buffer */
- tty_flip_buffer_push(flip);
- flip = NULL;
- }
-
- if (hangup) {
- tty_hangup(hangup);
- }
-
if (handshake) {
pr_debug("hvsi%i: attempting re-handshake\n", handshake->index);
schedule_work(&handshake->handshaker);
@@ -534,15 +513,11 @@ static irqreturn_t hvsi_interrupt(int irq, void *arg)
&& (!test_bit(TTY_THROTTLED, &hp->tty->flags))) {
/* we weren't hung up and we weren't throttled, so we can deliver the
* rest now */
- flip = hp->tty;
- hvsi_send_overflow(hp);
+ hvsi_send_overflow(hp, hp->tty);
+ tty_flip_buffer_push(hp->tty);
}
spin_unlock_irqrestore(&hp->lock, flags);
- if (flip) {
- tty_flip_buffer_push(flip);
- }
-
return IRQ_HANDLED;
}
@@ -966,8 +941,8 @@ static int hvsi_write(struct tty_struct *tty,
* and hvsi_write_worker will be scheduled. subsequent hvsi_write() calls
* will see there is no room in outbuf and return.
*/
- while ((count > 0) && (hvsi_write_room(hp->tty) > 0)) {
- int chunksize = min(count, hvsi_write_room(hp->tty));
+ while ((count > 0) && (hvsi_write_room(tty) > 0)) {
+ int chunksize = min(count, hvsi_write_room(tty));
BUG_ON(hp->n_outbuf < 0);
memcpy(hp->outbuf + hp->n_outbuf, source, chunksize);
@@ -1014,19 +989,16 @@ static void hvsi_unthrottle(struct tty_struct *tty)
{
struct hvsi_struct *hp = tty->driver_data;
unsigned long flags;
- int shouldflip = 0;
pr_debug("%s\n", __func__);
spin_lock_irqsave(&hp->lock, flags);
if (hp->n_throttle) {
- hvsi_send_overflow(hp);
- shouldflip = 1;
+ hvsi_send_overflow(hp, tty);
+ tty_flip_buffer_push(tty);
}
spin_unlock_irqrestore(&hp->lock, flags);
- if (shouldflip)
- tty_flip_buffer_push(hp->tty);
h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
}
--
1.7.9.2
^ permalink raw reply related
* [PATCH 41/69] TTY: hvcs, use kref from tty_port
From: Jiri Slaby @ 2012-04-02 11:54 UTC (permalink / raw)
To: gregkh; +Cc: jirislaby, linuxppc-dev, linux-kernel, alan
In-Reply-To: <1333367693-3244-1-git-send-email-jslaby@suse.cz>
A simple switch. Except we convert destroy_hvcs_struct to be
tty_port_operations->destruct...
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: linuxppc-dev@lists.ozlabs.org
---
drivers/tty/hvc/hvcs.c | 34 ++++++++++++++++------------------
1 file changed, 16 insertions(+), 18 deletions(-)
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index a049ced..817f94b 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -290,12 +290,11 @@ struct hvcs_struct {
int chars_in_buffer;
/*
- * Any variable below the kref is valid before a tty is connected and
+ * Any variable below is valid before a tty is connected and
* stays valid after the tty is disconnected. These shouldn't be
* whacked until the kobject refcount reaches zero though some entries
* may be changed via sysfs initiatives.
*/
- struct kref kref; /* ref count & hvcs_struct lifetime */
int connected; /* is the vty-server currently connected to a vty? */
uint32_t p_unit_address; /* partner unit address */
uint32_t p_partition_ID; /* partner partition ID */
@@ -304,9 +303,6 @@ struct hvcs_struct {
struct vio_dev *vdev;
};
-/* Required to back map a kref to its containing object */
-#define from_kref(k) container_of(k, struct hvcs_struct, kref)
-
static LIST_HEAD(hvcs_structs);
static DEFINE_SPINLOCK(hvcs_structs_lock);
static DEFINE_MUTEX(hvcs_init_mutex);
@@ -701,10 +697,9 @@ static void hvcs_return_index(int index)
hvcs_index_list[index] = -1;
}
-/* callback when the kref ref count reaches zero */
-static void destroy_hvcs_struct(struct kref *kref)
+static void hvcs_destruct_port(struct tty_port *p)
{
- struct hvcs_struct *hvcsd = from_kref(kref);
+ struct hvcs_struct *hvcsd = container_of(p, struct hvcs_struct, port);
struct vio_dev *vdev;
unsigned long flags;
@@ -741,6 +736,10 @@ static void destroy_hvcs_struct(struct kref *kref)
kfree(hvcsd);
}
+static const struct tty_port_operations hvcs_port_ops = {
+ .destruct = hvcs_destruct_port,
+};
+
static int hvcs_get_index(void)
{
int i;
@@ -790,9 +789,8 @@ static int __devinit hvcs_probe(
return -ENODEV;
tty_port_init(&hvcsd->port);
+ hvcsd->port.ops = &hvcs_port_ops;
spin_lock_init(&hvcsd->lock);
- /* Automatically incs the refcount the first time */
- kref_init(&hvcsd->kref);
hvcsd->vdev = dev;
dev_set_drvdata(&dev->dev, hvcsd);
@@ -860,7 +858,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev)
* Let the last holder of this object cause it to be removed, which
* would probably be tty_hangup below.
*/
- kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ tty_port_put(&hvcsd->port);
/*
* The hangup is a scheduled function which will auto chain call
@@ -1094,7 +1092,7 @@ static struct hvcs_struct *hvcs_get_by_index(int index)
list_for_each_entry(hvcsd, &hvcs_structs, next) {
spin_lock_irqsave(&hvcsd->lock, flags);
if (hvcsd->index == index) {
- kref_get(&hvcsd->kref);
+ tty_port_get(&hvcsd->port);
spin_unlock_irqrestore(&hvcsd->lock, flags);
spin_unlock(&hvcs_structs_lock);
return hvcsd;
@@ -1160,7 +1158,7 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp)
* and will grab the spinlock and free the connection if it fails.
*/
if (((rc = hvcs_enable_device(hvcsd, unit_address, irq, vdev)))) {
- kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ tty_port_put(&hvcsd->port);
printk(KERN_WARNING "HVCS: enable device failed.\n");
return rc;
}
@@ -1171,7 +1169,7 @@ fast_open:
hvcsd = tty->driver_data;
spin_lock_irqsave(&hvcsd->lock, flags);
- kref_get(&hvcsd->kref);
+ tty_port_get(&hvcsd->port);
hvcsd->port.count++;
hvcsd->todo_mask |= HVCS_SCHED_READ;
spin_unlock_irqrestore(&hvcsd->lock, flags);
@@ -1186,7 +1184,7 @@ open_success:
error_release:
spin_unlock_irqrestore(&hvcsd->lock, flags);
- kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ tty_port_put(&hvcsd->port);
printk(KERN_WARNING "HVCS: partner connect failed.\n");
return retval;
@@ -1240,7 +1238,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
tty->driver_data = NULL;
free_irq(irq, hvcsd);
- kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ tty_port_put(&hvcsd->port);
return;
} else if (hvcsd->port.count < 0) {
printk(KERN_ERR "HVCS: vty-server@%X open_count: %d"
@@ -1249,7 +1247,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
}
spin_unlock_irqrestore(&hvcsd->lock, flags);
- kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ tty_port_put(&hvcsd->port);
}
static void hvcs_hangup(struct tty_struct * tty)
@@ -1301,7 +1299,7 @@ static void hvcs_hangup(struct tty_struct * tty)
* NOTE: If this hangup was signaled from user space then the
* final put will never happen.
*/
- kref_put(&hvcsd->kref, destroy_hvcs_struct);
+ tty_port_put(&hvcsd->port);
}
}
--
1.7.9.2
^ permalink raw reply related
* [PATCH 43/69] TTY: hvsi, CLOCAL is not in tty->flags
From: Jiri Slaby @ 2012-04-02 11:54 UTC (permalink / raw)
To: gregkh; +Cc: jirislaby, linuxppc-dev, linux-kernel, alan
In-Reply-To: <1333367693-3244-1-git-send-email-jslaby@suse.cz>
It is in termios cflags. So change the test in hvsi_recv_control to do
the right thing. Previously it was actually testing TTY_LDISC_OPEN
bit, i.e. whether an ldisc is active. And yes, it is most of the time.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: linuxppc-dev@lists.ozlabs.org
---
drivers/tty/hvc/hvsi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index a7488b7..4006aed 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -248,7 +248,7 @@ static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet,
pr_debug("hvsi%i: CD dropped\n", hp->index);
hp->mctrl &= TIOCM_CD;
/* If userland hasn't done an open(2) yet, hp->tty is NULL. */
- if (hp->tty && !(hp->tty->flags & CLOCAL))
+ if (hp->tty && !C_CLOCAL(hp->tty))
*to_hangup = hp->tty;
}
break;
--
1.7.9.2
^ permalink raw reply related
* [PATCH 40/69] TTY: hvcs, add tty_port
From: Jiri Slaby @ 2012-04-02 11:54 UTC (permalink / raw)
To: gregkh; +Cc: jirislaby, linuxppc-dev, linux-kernel, alan
In-Reply-To: <1333367693-3244-1-git-send-email-jslaby@suse.cz>
And use count from there.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: linuxppc-dev@lists.ozlabs.org
---
drivers/tty/hvc/hvcs.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 3436436..a049ced 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -261,6 +261,7 @@ static DEFINE_SPINLOCK(hvcs_pi_lock);
/* One vty-server per hvcs_struct */
struct hvcs_struct {
+ struct tty_port port;
spinlock_t lock;
/*
@@ -270,7 +271,6 @@ struct hvcs_struct {
unsigned int index;
struct tty_struct *tty;
- int open_count;
/*
* Used to tell the driver kernel_thread what operations need to take
@@ -422,7 +422,7 @@ static ssize_t hvcs_vterm_state_store(struct device *dev, struct device_attribut
spin_lock_irqsave(&hvcsd->lock, flags);
- if (hvcsd->open_count > 0) {
+ if (hvcsd->port.count > 0) {
spin_unlock_irqrestore(&hvcsd->lock, flags);
printk(KERN_INFO "HVCS: vterm state unchanged. "
"The hvcs device node is still in use.\n");
@@ -789,7 +789,7 @@ static int __devinit hvcs_probe(
if (!hvcsd)
return -ENODEV;
-
+ tty_port_init(&hvcsd->port);
spin_lock_init(&hvcsd->lock);
/* Automatically incs the refcount the first time */
kref_init(&hvcsd->kref);
@@ -1138,7 +1138,7 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp)
if ((retval = hvcs_partner_connect(hvcsd)))
goto error_release;
- hvcsd->open_count = 1;
+ hvcsd->port.count = 1;
hvcsd->tty = tty;
tty->driver_data = hvcsd;
@@ -1172,7 +1172,7 @@ fast_open:
spin_lock_irqsave(&hvcsd->lock, flags);
kref_get(&hvcsd->kref);
- hvcsd->open_count++;
+ hvcsd->port.count++;
hvcsd->todo_mask |= HVCS_SCHED_READ;
spin_unlock_irqrestore(&hvcsd->lock, flags);
@@ -1216,7 +1216,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
hvcsd = tty->driver_data;
spin_lock_irqsave(&hvcsd->lock, flags);
- if (--hvcsd->open_count == 0) {
+ if (--hvcsd->port.count == 0) {
vio_disable_interrupts(hvcsd->vdev);
@@ -1242,10 +1242,10 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
free_irq(irq, hvcsd);
kref_put(&hvcsd->kref, destroy_hvcs_struct);
return;
- } else if (hvcsd->open_count < 0) {
+ } else if (hvcsd->port.count < 0) {
printk(KERN_ERR "HVCS: vty-server@%X open_count: %d"
" is missmanaged.\n",
- hvcsd->vdev->unit_address, hvcsd->open_count);
+ hvcsd->vdev->unit_address, hvcsd->port.count);
}
spin_unlock_irqrestore(&hvcsd->lock, flags);
@@ -1261,7 +1261,7 @@ static void hvcs_hangup(struct tty_struct * tty)
spin_lock_irqsave(&hvcsd->lock, flags);
/* Preserve this so that we know how many kref refs to put */
- temp_open_count = hvcsd->open_count;
+ temp_open_count = hvcsd->port.count;
/*
* Don't kref put inside the spinlock because the destruction
@@ -1276,7 +1276,7 @@ static void hvcs_hangup(struct tty_struct * tty)
hvcsd->tty->driver_data = NULL;
hvcsd->tty = NULL;
- hvcsd->open_count = 0;
+ hvcsd->port.count = 0;
/* This will drop any buffered data on the floor which is OK in a hangup
* scenario. */
@@ -1347,7 +1347,7 @@ static int hvcs_write(struct tty_struct *tty,
* the middle of a write operation? This is a crummy place to do this
* but we want to keep it all in the spinlock.
*/
- if (hvcsd->open_count <= 0) {
+ if (hvcsd->port.count <= 0) {
spin_unlock_irqrestore(&hvcsd->lock, flags);
return -ENODEV;
}
@@ -1421,7 +1421,7 @@ static int hvcs_write_room(struct tty_struct *tty)
{
struct hvcs_struct *hvcsd = tty->driver_data;
- if (!hvcsd || hvcsd->open_count <= 0)
+ if (!hvcsd || hvcsd->port.count <= 0)
return 0;
return HVCS_BUFF_LEN - hvcsd->chars_in_buffer;
--
1.7.9.2
^ permalink raw reply related
* [PATCH 46/69] TTY: hvsi, use tty from tty_port
From: Jiri Slaby @ 2012-04-02 11:54 UTC (permalink / raw)
To: gregkh; +Cc: jirislaby, linuxppc-dev, linux-kernel, alan
In-Reply-To: <1333367693-3244-1-git-send-email-jslaby@suse.cz>
Now, we switch to the refcounted model and do not need hp->lock to
protect hp->tty anymore.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: linuxppc-dev@lists.ozlabs.org
---
drivers/tty/hvc/hvsi.c | 35 +++++++++++++++++++++--------------
1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index 68b729b..6f5bc49 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -76,7 +76,6 @@ struct hvsi_struct {
wait_queue_head_t stateq; /* woken when HVSI state changes */
spinlock_t lock;
int index;
- struct tty_struct *tty;
uint8_t throttle_buf[128];
uint8_t outbuf[N_OUTBUF]; /* to implement write_room and chars_in_buffer */
/* inbuf is for packet reassembly. leave a little room for leftovers. */
@@ -492,14 +491,17 @@ static irqreturn_t hvsi_interrupt(int irq, void *arg)
{
struct hvsi_struct *hp = (struct hvsi_struct *)arg;
struct hvsi_struct *handshake;
+ struct tty_struct *tty;
unsigned long flags;
int again = 1;
pr_debug("%s\n", __func__);
+ tty = tty_port_tty_get(&hp->port);
+
while (again) {
spin_lock_irqsave(&hp->lock, flags);
- again = hvsi_load_chunk(hp, hp->tty, &handshake);
+ again = hvsi_load_chunk(hp, tty, &handshake);
spin_unlock_irqrestore(&hp->lock, flags);
if (handshake) {
@@ -509,15 +511,16 @@ static irqreturn_t hvsi_interrupt(int irq, void *arg)
}
spin_lock_irqsave(&hp->lock, flags);
- if (hp->tty && hp->n_throttle
- && (!test_bit(TTY_THROTTLED, &hp->tty->flags))) {
- /* we weren't hung up and we weren't throttled, so we can deliver the
- * rest now */
- hvsi_send_overflow(hp, hp->tty);
- tty_flip_buffer_push(hp->tty);
+ if (tty && hp->n_throttle && !test_bit(TTY_THROTTLED, &tty->flags)) {
+ /* we weren't hung up and we weren't throttled, so we can
+ * deliver the rest now */
+ hvsi_send_overflow(hp, tty);
+ tty_flip_buffer_push(tty);
}
spin_unlock_irqrestore(&hp->lock, flags);
+ tty_kref_put(tty);
+
return IRQ_HANDLED;
}
@@ -724,8 +727,8 @@ static int hvsi_open(struct tty_struct *tty, struct file *filp)
if (hp->state == HVSI_FSP_DIED)
return -EIO;
+ tty_port_tty_set(&hp->port, tty);
spin_lock_irqsave(&hp->lock, flags);
- hp->tty = tty;
hp->port.count++;
atomic_set(&hp->seqno, 0);
h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
@@ -784,7 +787,7 @@ static void hvsi_close(struct tty_struct *tty, struct file *filp)
spin_lock_irqsave(&hp->lock, flags);
if (--hp->port.count == 0) {
- hp->tty = NULL;
+ tty_port_tty_set(&hp->port, NULL);
hp->inbuf_end = hp->inbuf; /* discard remaining partial packets */
/* only close down connection if it is not the console */
@@ -830,12 +833,11 @@ static void hvsi_hangup(struct tty_struct *tty)
pr_debug("%s\n", __func__);
- spin_lock_irqsave(&hp->lock, flags);
+ tty_port_tty_set(&hp->port, NULL);
+ spin_lock_irqsave(&hp->lock, flags);
hp->port.count = 0;
hp->n_outbuf = 0;
- hp->tty = NULL;
-
spin_unlock_irqrestore(&hp->lock, flags);
}
@@ -863,6 +865,7 @@ static void hvsi_write_worker(struct work_struct *work)
{
struct hvsi_struct *hp =
container_of(work, struct hvsi_struct, writer.work);
+ struct tty_struct *tty;
unsigned long flags;
#ifdef DEBUG
static long start_j = 0;
@@ -896,7 +899,11 @@ static void hvsi_write_worker(struct work_struct *work)
start_j = 0;
#endif /* DEBUG */
wake_up_all(&hp->emptyq);
- tty_wakeup(hp->tty);
+ tty = tty_port_tty_get(&hp->port);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
}
out:
--
1.7.9.2
^ permalink raw reply related
* [PATCH 39/69] TTY: HVC, use count from tty_port
From: Jiri Slaby @ 2012-04-02 11:54 UTC (permalink / raw)
To: gregkh; +Cc: jirislaby, linuxppc-dev, linux-kernel, alan
In-Reply-To: <1333367693-3244-1-git-send-email-jslaby@suse.cz>
Now, count is used from tty_port and protected by tty_port->lock.
n_outbuf is left unprotected in hvc_hangup now, because there is no
point to hold any lock, since other uses are unprotected too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: linuxppc-dev@lists.ozlabs.org
---
drivers/tty/hvc/hvc_console.c | 40 +++++++++++++++++++++-------------------
drivers/tty/hvc/hvc_console.h | 1 -
2 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 92b7f5d..6c45cbf 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -313,18 +313,18 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
if (!(hp = hvc_get_by_index(tty->index)))
return -ENODEV;
- spin_lock_irqsave(&hp->lock, flags);
+ spin_lock_irqsave(&hp->port.lock, flags);
/* Check and then increment for fast path open. */
- if (hp->count++ > 0) {
+ if (hp->port.count++ > 0) {
+ spin_unlock_irqrestore(&hp->port.lock, flags);
+ /* FIXME why taking a reference here? */
tty_kref_get(tty);
- spin_unlock_irqrestore(&hp->lock, flags);
hvc_kick();
return 0;
} /* else count == 0 */
+ spin_unlock_irqrestore(&hp->port.lock, flags);
tty->driver_data = hp;
- spin_unlock_irqrestore(&hp->lock, flags);
-
tty_port_tty_set(&hp->port, tty);
if (hp->ops->notifier_add)
@@ -367,10 +367,10 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
hp = tty->driver_data;
- spin_lock_irqsave(&hp->lock, flags);
+ spin_lock_irqsave(&hp->port.lock, flags);
- if (--hp->count == 0) {
- spin_unlock_irqrestore(&hp->lock, flags);
+ if (--hp->port.count == 0) {
+ spin_unlock_irqrestore(&hp->port.lock, flags);
/* We are done with the tty pointer now. */
tty_port_tty_set(&hp->port, NULL);
@@ -387,10 +387,10 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
*/
tty_wait_until_sent_from_close(tty, HVC_CLOSE_WAIT);
} else {
- if (hp->count < 0)
+ if (hp->port.count < 0)
printk(KERN_ERR "hvc_close %X: oops, count is %d\n",
- hp->vtermno, hp->count);
- spin_unlock_irqrestore(&hp->lock, flags);
+ hp->vtermno, hp->port.count);
+ spin_unlock_irqrestore(&hp->port.lock, flags);
}
tty_kref_put(tty);
@@ -409,24 +409,25 @@ static void hvc_hangup(struct tty_struct *tty)
/* cancel pending tty resize work */
cancel_work_sync(&hp->tty_resize);
- spin_lock_irqsave(&hp->lock, flags);
+ spin_lock_irqsave(&hp->port.lock, flags);
/*
* The N_TTY line discipline has problems such that in a close vs
* open->hangup case this can be called after the final close so prevent
* that from happening for now.
*/
- if (hp->count <= 0) {
- spin_unlock_irqrestore(&hp->lock, flags);
+ if (hp->port.count <= 0) {
+ spin_unlock_irqrestore(&hp->port.lock, flags);
return;
}
- temp_open_count = hp->count;
- hp->count = 0;
- hp->n_outbuf = 0;
- spin_unlock_irqrestore(&hp->lock, flags);
+ temp_open_count = hp->port.count;
+ hp->port.count = 0;
+ spin_unlock_irqrestore(&hp->port.lock, flags);
tty_port_tty_set(&hp->port, NULL);
+ hp->n_outbuf = 0;
+
if (hp->ops->notifier_hangup)
hp->ops->notifier_hangup(hp, hp->data);
@@ -474,7 +475,8 @@ static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count
if (!hp)
return -EPIPE;
- if (hp->count <= 0)
+ /* FIXME what's this (unprotected) check for? */
+ if (hp->port.count <= 0)
return -EIO;
spin_lock_irqsave(&hp->lock, flags);
diff --git a/drivers/tty/hvc/hvc_console.h b/drivers/tty/hvc/hvc_console.h
index 594a28f..674d23c 100644
--- a/drivers/tty/hvc/hvc_console.h
+++ b/drivers/tty/hvc/hvc_console.h
@@ -49,7 +49,6 @@ struct hvc_struct {
struct tty_port port;
spinlock_t lock;
int index;
- int count;
int do_wakeup;
char *outbuf;
int outbuf_size;
--
1.7.9.2
^ permalink raw reply related
* [PATCH 38/69] TTY: HVC, use tty from tty_port
From: Jiri Slaby @ 2012-04-02 11:54 UTC (permalink / raw)
To: gregkh; +Cc: jirislaby, linuxppc-dev, linux-kernel, alan
In-Reply-To: <1333367693-3244-1-git-send-email-jslaby@suse.cz>
The driver already used refcounting. So we just switch it to tty_port
helpers. And switch to tty_port->lock for tty.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: linuxppc-dev@lists.ozlabs.org
---
drivers/tty/hvc/hvc_console.c | 36 +++++++++++++++---------------------
drivers/tty/hvc/hvc_console.h | 1 -
drivers/tty/hvc/hvsi_lib.c | 2 +-
3 files changed, 16 insertions(+), 23 deletions(-)
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 12a4273..92b7f5d 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -323,11 +323,10 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
} /* else count == 0 */
tty->driver_data = hp;
-
- hp->tty = tty_kref_get(tty);
-
spin_unlock_irqrestore(&hp->lock, flags);
+ tty_port_tty_set(&hp->port, tty);
+
if (hp->ops->notifier_add)
rc = hp->ops->notifier_add(hp, hp->data);
@@ -338,9 +337,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
* tty fields and return the kref reference.
*/
if (rc) {
- spin_lock_irqsave(&hp->lock, flags);
- hp->tty = NULL;
- spin_unlock_irqrestore(&hp->lock, flags);
+ tty_port_tty_set(&hp->port, NULL);
tty_kref_put(tty);
tty->driver_data = NULL;
tty_port_put(&hp->port);
@@ -373,9 +370,9 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
spin_lock_irqsave(&hp->lock, flags);
if (--hp->count == 0) {
- /* We are done with the tty pointer now. */
- hp->tty = NULL;
spin_unlock_irqrestore(&hp->lock, flags);
+ /* We are done with the tty pointer now. */
+ tty_port_tty_set(&hp->port, NULL);
if (hp->ops->notifier_del)
hp->ops->notifier_del(hp, hp->data);
@@ -427,9 +424,8 @@ static void hvc_hangup(struct tty_struct *tty)
temp_open_count = hp->count;
hp->count = 0;
hp->n_outbuf = 0;
- hp->tty = NULL;
-
spin_unlock_irqrestore(&hp->lock, flags);
+ tty_port_tty_set(&hp->port, NULL);
if (hp->ops->notifier_hangup)
hp->ops->notifier_hangup(hp, hp->data);
@@ -526,13 +522,12 @@ static void hvc_set_winsz(struct work_struct *work)
hp = container_of(work, struct hvc_struct, tty_resize);
- spin_lock_irqsave(&hp->lock, hvc_flags);
- if (!hp->tty) {
- spin_unlock_irqrestore(&hp->lock, hvc_flags);
+ tty = tty_port_tty_get(&hp->port);
+ if (!tty)
return;
- }
- ws = hp->ws;
- tty = tty_kref_get(hp->tty);
+
+ spin_lock_irqsave(&hp->lock, hvc_flags);
+ ws = hp->ws;
spin_unlock_irqrestore(&hp->lock, hvc_flags);
tty_do_resize(tty, &ws);
@@ -601,7 +596,7 @@ int hvc_poll(struct hvc_struct *hp)
}
/* No tty attached, just skip */
- tty = tty_kref_get(hp->tty);
+ tty = tty_port_tty_get(&hp->port);
if (tty == NULL)
goto bail;
@@ -681,8 +676,7 @@ int hvc_poll(struct hvc_struct *hp)
tty_flip_buffer_push(tty);
}
- if (tty)
- tty_kref_put(tty);
+ tty_kref_put(tty);
return poll_mask;
}
@@ -880,9 +874,9 @@ int hvc_remove(struct hvc_struct *hp)
unsigned long flags;
struct tty_struct *tty;
- spin_lock_irqsave(&hp->lock, flags);
- tty = tty_kref_get(hp->tty);
+ tty = tty_port_tty_get(&hp->port);
+ spin_lock_irqsave(&hp->lock, flags);
if (hp->index < MAX_NR_HVC_CONSOLES)
vtermnos[hp->index] = -1;
diff --git a/drivers/tty/hvc/hvc_console.h b/drivers/tty/hvc/hvc_console.h
index 926d9e4..594a28f 100644
--- a/drivers/tty/hvc/hvc_console.h
+++ b/drivers/tty/hvc/hvc_console.h
@@ -49,7 +49,6 @@ struct hvc_struct {
struct tty_port port;
spinlock_t lock;
int index;
- struct tty_struct *tty;
int count;
int do_wakeup;
char *outbuf;
diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c
index 6f4dd83..59c135d 100644
--- a/drivers/tty/hvc/hvsi_lib.c
+++ b/drivers/tty/hvc/hvsi_lib.c
@@ -377,7 +377,7 @@ int hvsilib_open(struct hvsi_priv *pv, struct hvc_struct *hp)
pr_devel("HVSI@%x: open !\n", pv->termno);
/* Keep track of the tty data structure */
- pv->tty = tty_kref_get(hp->tty);
+ pv->tty = tty_port_tty_get(&hp->port);
hvsilib_establish(pv);
--
1.7.9.2
^ permalink raw reply related
* [PATCH 42/69] TTY: hvcs, use tty from tty_port
From: Jiri Slaby @ 2012-04-02 11:54 UTC (permalink / raw)
To: gregkh; +Cc: jirislaby, linuxppc-dev, linux-kernel, alan
In-Reply-To: <1333367693-3244-1-git-send-email-jslaby@suse.cz>
No refcounting, just a switch. The locking in the driver prevents
races, so in fact the refcounting is not needed. But while we have a
tty in tty_port, don't duplicate that and remove the one from
hvcs_struct.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: linuxppc-dev@lists.ozlabs.org
---
drivers/tty/hvc/hvcs.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 817f94b..d56788c 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -270,8 +270,6 @@ struct hvcs_struct {
*/
unsigned int index;
- struct tty_struct *tty;
-
/*
* Used to tell the driver kernel_thread what operations need to take
* place upon this hvcs_struct instance.
@@ -560,7 +558,7 @@ static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance)
static void hvcs_try_write(struct hvcs_struct *hvcsd)
{
uint32_t unit_address = hvcsd->vdev->unit_address;
- struct tty_struct *tty = hvcsd->tty;
+ struct tty_struct *tty = hvcsd->port.tty;
int sent;
if (hvcsd->todo_mask & HVCS_TRY_WRITE) {
@@ -598,7 +596,7 @@ static int hvcs_io(struct hvcs_struct *hvcsd)
spin_lock_irqsave(&hvcsd->lock, flags);
unit_address = hvcsd->vdev->unit_address;
- tty = hvcsd->tty;
+ tty = hvcsd->port.tty;
hvcs_try_write(hvcsd);
@@ -850,7 +848,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev)
spin_lock_irqsave(&hvcsd->lock, flags);
- tty = hvcsd->tty;
+ tty = hvcsd->port.tty;
spin_unlock_irqrestore(&hvcsd->lock, flags);
@@ -1137,7 +1135,7 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp)
goto error_release;
hvcsd->port.count = 1;
- hvcsd->tty = tty;
+ hvcsd->port.tty = tty;
tty->driver_data = hvcsd;
memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
@@ -1223,7 +1221,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
* execute any operations on the TTY even though it is obligated
* to deliver any pending I/O to the hypervisor.
*/
- hvcsd->tty = NULL;
+ hvcsd->port.tty = NULL;
irq = hvcsd->vdev->irq;
spin_unlock_irqrestore(&hvcsd->lock, flags);
@@ -1271,8 +1269,8 @@ static void hvcs_hangup(struct tty_struct * tty)
hvcsd->todo_mask = 0;
/* I don't think the tty needs the hvcs_struct pointer after a hangup */
- hvcsd->tty->driver_data = NULL;
- hvcsd->tty = NULL;
+ tty->driver_data = NULL;
+ hvcsd->port.tty = NULL;
hvcsd->port.count = 0;
--
1.7.9.2
^ permalink raw reply related
* Re: [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead
From: Andreas Schwab @ 2012-04-02 10:31 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <1333340517.30734.42.camel@pasglop>
[-- Attachment #1: Type: text/plain, Size: 434 bytes --]
Benjamin Herrenschmidt <benh@kernel.crashing.org> writes:
> - PowerMac7,3 aka Dual G5 AGP. This ones has U3 + K2 and
> uses cascaded MPICs
That's the same as mine, config is attached. I'm currently trying to
bisect the commit that actually broke the series.
Andreas.
--
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
[-- Attachment #2: config-3.4.0-rc1 --]
[-- Type: text/plain, Size: 74307 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 3.4.0-rc1 Kernel Configuration
#
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_PPC_BOOK3S_64=y
# CONFIG_PPC_BOOK3E_64 is not set
CONFIG_PPC_BOOK3S=y
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
# CONFIG_VSX is not set
# CONFIG_PPC_ICSWX is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NR_IRQS=64
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not set
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_EPAPR_BOOT is not set
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_PPC_OF_PLATFORM_PCI is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_DEV_THROTTLING=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
# CONFIG_PPC_XICS is not set
# CONFIG_PPC_ICP_NATIVE is not set
# CONFIG_PPC_ICP_HV is not set
# CONFIG_PPC_ICS_RTAS is not set
# CONFIG_GE_FPGA is not set
#
# Platform support
#
# CONFIG_PPC_POWERNV is not set
# CONFIG_PPC_PSERIES is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_CELL_QPACE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_PPC_WSP is not set
CONFIG_KVM_GUEST=y
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_PPC_EPAPR_HV_PIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_MPIC_MSGR is not set
# CONFIG_PPC_I8259 is not set
CONFIG_U3_DART=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_U3_HT_IRQS=y
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
# CONFIG_PPC_P7_NAP is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# PowerPC CPU frequency scaling drivers
#
#
# CPU Frequency drivers
#
CONFIG_CPU_FREQ_PMAC64=y
#
# CPUIdle driver
#
# CONFIG_CPU_IDLE is not set
# CONFIG_FSL_ULI1575 is not set
# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_HELPER=y
# CONFIG_SWIOTLB is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_MAX_ACTIVE_REGIONS=256
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
# CONFIG_MIGRATION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_CLEANCACHE is not set
# CONFIG_PPC_HAS_HASH_64K is not set
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# CONFIG_RAPIDIO is not set
# CONFIG_NONSTATIC_KERNEL is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
CONFIG_HAVE_BPF_JIT=y
CONFIG_BPF_JIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
# CONFIG_DMA_SHARED_BUFFER is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
CONFIG_PROC_DEVICETREE=y
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
CONFIG_SATA_SVW=y
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MACIO=y
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_RAID=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_LED=y
# CONFIG_ADB_PMU_LED_IDE is not set
# CONFIG_PMAC_SMU is not set
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_THERM_PM72=y
# CONFIG_WINDFARM is not set
# CONFIG_PMAC_RACKMETER is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
# CONFIG_NET_FC is not set
CONFIG_MII=m
CONFIG_IFB=m
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=m
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_TR is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
CONFIG_B43=m
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PIO=y
# CONFIG_B43_PHY_N is not set
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_LIBERTAS is not set
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_APPLE_AIRPORT=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
# CONFIG_ORINOCO_USB is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL1251 is not set
# CONFIG_WL12XX_MENU is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
CONFIG_SERIAL_PMACZILOG_TTYS=y
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_UDBG is not set
CONFIG_VIRTIO_CONSOLE=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=4096
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_SMB347 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ALIM7101_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_S5M_CORE is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_UNINORTH=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_NOUVEAU=y
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_DEBUG=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_UDL is not set
# CONFIG_STUB_POULSBO is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LP855X is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_PPC is not set
CONFIG_SND_AOA=m
CONFIG_SND_AOA_FABRIC_LAYOUT=m
CONFIG_SND_AOA_ONYX=m
CONFIG_SND_AOA_TAS=m
CONFIG_SND_AOA_TOONIE=m
CONFIG_SND_AOA_SOUNDBUS=m
CONFIG_SND_AOA_SOUNDBUS_I2S=m
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_FIREWIRE_SPEAKERS=m
CONFIG_SND_ISIGHT=m
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
# CONFIG_HID_WACOM_POWER_SUPPLY is not set
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
# CONFIG_USB_SERIAL_ZIO is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_NOP_USB_XCEIV=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_CPC925 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_TIMB_DMA is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=m
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
#
# Hardware Spinlock drivers
#
CONFIG_IOMMU_SUPPORT=y
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
CONFIG_VIRT_DRIVERS=y
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=m
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
CONFIG_CIFS_ACL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_9P_FS=m
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
CONFIG_CORDIC=m
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_STRICT_DEVMEM=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_KEYS_COMPAT=y
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_BOOK3S_HANDLER=y
CONFIG_KVM_BOOK3S_64_HANDLER=y
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_HV=y
CONFIG_VHOST_NET=m
^ permalink raw reply
* Re: [PATCH 08/18] PCI, powerpc: Register busn_res for root buses
From: Milton Miller @ 2012-04-02 10:19 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Tony Luck, Linus Torvalds, linuxppc-dev, lkml, Dominik Brodowski,
Jesse Barnes, Greg Kroah-Hartmann, Bjorn Helgaas, Andrew Morton,
Yinghai Lu
In-Reply-To: <1330472496.11728.31.camel@pasglop>
[Apollogies if I left anyone off cc. I am not subscribed and the archives
go to great pains to hide the to and cc lists, and then truncate it for size]
{fix a comma in cc}
On Tue Feb 28 2012 about 18:42:03 EST, Benjamin Herrenschmidt wrote:
> On Tue, 2012-02-28 at 16:31 -0700, Bjorn Helgaas wrote:
> > We may need mechanism to say "don't trust this info from the
> > firmware," but we should be able to figure out a way that doesn't
> > penalize platforms that do everything correctly. The current patch
> > breaks these scenarios even when the platform firmware is 100%
> > correct.
>
> On the other hand, our firmwares tend not to be and the vast majority of
> our platforms have separate bus number domains (In fact I'm not sure
> whether we have one that actually splits bus numbers or not, maybe some
> ancient Apple gear, I need to double check).
>
In the POWER3 era we had several boxes that split the pci bus number
space across domains and RTAS used the bus number to find the correct
PHB. This contineed to the first RS64 boxes. By S80 and RS64-III
it was obvious that we didn't have enough numbers to continue this
ilusion and we added the presently used RTAS calls that take the pci
domain as well as bus, device, and function numbers.
The bus numbers split across pci domains started with the F50
F50 chrp 32 bit platforms.
> We did use to force renumbering on macs to avoid bus number collisions
> between domains because of ancient X servers that didn't do domains
> properly but I think we dropped that.
>
> Cheers,
> Ben.
milton
^ permalink raw reply
* Re: [PATCH 08/18] PCI, powerpc: Register busn_res for root buses
From: Milton Miller @ 2012-04-02 9:58 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Tony Luck, Linus Torvalds, linuxppc-dev, lkml, Dominik Brodowski,
Jesse Barnes, Greg Kroah-Hartmann, Bjorn Helgaas, Andrew Morton,
Yinghai Lu
In-Reply-To: <1330472496.11728.31.camel@pasglop>
[Apollogies if I left anyone off cc. I am not subscribed and the archives
go to great pains to hide the to and cc lists, and then truncate it for size]
On Tue Feb 28 2012 about 18:42:03 EST, Benjamin Herrenschmidt wrote:
> On Tue, 2012-02-28 at 16:31 -0700, Bjorn Helgaas wrote:
> > We may need mechanism to say "don't trust this info from the
> > firmware," but we should be able to figure out a way that doesn't
> > penalize platforms that do everything correctly. The current patch
> > breaks these scenarios even when the platform firmware is 100%
> > correct.
>
> On the other hand, our firmwares tend not to be and the vast majority of
> our platforms have separate bus number domains (In fact I'm not sure
> whether we have one that actually splits bus numbers or not, maybe some
> ancient Apple gear, I need to double check).
>
In the POWER3 era we had several boxes that split the pci bus number
space across domains and RTAS used the bus number to find the correct
PHB. This contineed to the first RS64 boxes. By S80 and RS64-III
it was obvious that we didn't have enough numbers to continue this
ilusion and we added the presently used RTAS calls that take the pci
domain as well as bus, device, and function numbers.
The bus numbers split across pci domains started with the F50
F50 chrp 32 bit platforms.
> We did use to force renumbering on macs to avoid bus number collisions
> between domains because of ancient X servers that didn't do domains
> properly but I think we dropped that.
>
> Cheers,
> Ben.
milton
^ permalink raw reply
* RE: [REGRESSION][PATCH V4 1/3] bpf jit: Make the filter.c::__load_pointer helper non-static for the jits
From: David Laight @ 2012-04-02 9:18 UTC (permalink / raw)
To: Jan Seiffert, netdev
Cc: Eric Dumazet, linuxppc-dev, linux-kernel, Matt Evans,
David S. Miller
In-Reply-To: <4F75CC63.10405@googlemail.com>
=20
> The function is renamed to make it a little more clear what it does.
> It is not added to any .h because it is not for general=20
> consumption, only for bpf internal use (and so by the jits).
I'd have thought it better to put in into a bfp_internal.h
(or similar) with a big warning there about the asm users.
Possibly even worth adding some other defs that the asm
files will need (if there are any).
David
^ permalink raw reply
* Re: kilauea compilation breaks with v3.3 kernel and ELDK 4.2
From: Frank E. Svendsbøe @ 2012-04-02 8:37 UTC (permalink / raw)
To: Tony Breeds; +Cc: Wolfgang Denk, robert.karl.berger, linuxppc-dev
In-Reply-To: <20120402062826.GC2129@thor.bakeyournoodle.com>
On Mon, Apr 02, 2012 at 04:28:29PM +1000, Tony Breeds wrote:
> On Mon, Apr 02, 2012 at 12:01:55PM +1000, Benjamin Herrenschmidt wrote:
>
> > Ok, I've asked Tony to have a look at splitting the build decision
> > in arch/powerpc/boot along the same lines as the CPU families... ie only
> > wrappers for platforms potentially supported by the built kernel. That
> > should fix it.
>
> Please try this patch. Only lightly tested here. I haven't "split up"
> src-wlib yet as I wanted to verify I'm on the right track.
>
Thanks. It compiles now (for 8xx), but I still need to resolve a
vmalloc failure during boot that occurred sometime after 3.2, so I
haven't been able to test it yet.
You're on the right track. Now continue splitting up src-wlib :)
--
Best regards,
Frank
^ permalink raw reply
* [PATCH 5/5] powerpc: kernel: 16650 UART reg-shift support
From: Tanmay Inamdar @ 2012-04-02 6:39 UTC (permalink / raw)
To: benh, jwboyer, grant.likely, linuxppc-dev, linux-kernel,
devicetree-discuss
Cc: Tanmay Inamdar
In-Reply-To: <1333348747-12713-4-git-send-email-tinamdar@apm.com>
In APM8018X SOC, UART register address space has been relocated to 32-bit
data boundaries for APB bus implementation.
Current legacy_serial driver ignores the reg-shift property. This patch
modifies legacy_serial.c and udbg_16550.c to work with above mentioned UARTs.
Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
---
:100644 100644 8338aef... f5fc106... M arch/powerpc/include/asm/udbg.h
:100644 100644 bedd12e... d523b7d... M arch/powerpc/kernel/legacy_serial.c
:100644 100644 6837f83... e0cb7dc... M arch/powerpc/kernel/udbg_16550.c
arch/powerpc/include/asm/udbg.h | 2 +-
arch/powerpc/kernel/legacy_serial.c | 16 +++++---
arch/powerpc/kernel/udbg_16550.c | 64 ++++++++++++++++++++++------------
3 files changed, 52 insertions(+), 30 deletions(-)
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
index 8338aef..f5fc106 100644
--- a/arch/powerpc/include/asm/udbg.h
+++ b/arch/powerpc/include/asm/udbg.h
@@ -29,7 +29,7 @@ extern void udbg_printf(const char *fmt, ...)
extern void udbg_progress(char *s, unsigned short hex);
extern void udbg_init_uart(void __iomem *comport, unsigned int speed,
- unsigned int clock);
+ unsigned int clock, unsigned int regshift);
extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
unsigned int clock);
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index bedd12e..d523b7d 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -33,6 +33,7 @@ static struct legacy_serial_info {
unsigned int clock;
int irq_check_parent;
phys_addr_t taddr;
+ unsigned int regshift;
} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
static struct __initdata of_device_id legacy_serial_parents[] = {
@@ -42,6 +43,7 @@ static struct __initdata of_device_id legacy_serial_parents[] = {
{.compatible = "ibm,opb",},
{.compatible = "simple-bus",},
{.compatible = "wrs,epld-localbus",},
+ {.compatible = "apm,apb",},
{},
};
@@ -163,11 +165,6 @@ static int __init add_legacy_soc_port(struct device_node *np,
if (of_get_property(np, "clock-frequency", NULL) == NULL)
return -1;
- /* if reg-shift or offset, don't try to use it */
- if ((of_get_property(np, "reg-shift", NULL) != NULL) ||
- (of_get_property(np, "reg-offset", NULL) != NULL))
- return -1;
-
/* if rtas uses this device, don't try to use it as well */
if (of_get_property(np, "used-by-rtas", NULL) != NULL)
return -1;
@@ -319,7 +316,7 @@ static void __init setup_legacy_serial_console(int console)
if (info->speed == 0)
info->speed = udbg_probe_uart_speed(addr, info->clock);
DBG("default console speed = %d\n", info->speed);
- udbg_init_uart(addr, info->speed, info->clock);
+ udbg_init_uart(addr, info->speed, info->clock, info->regshift);
}
/*
@@ -336,6 +333,7 @@ void __init find_legacy_serial_ports(void)
struct device_node *np, *stdout = NULL;
const char *path;
int index;
+ unsigned int regshift;
DBG(" -> find_legacy_serial_port()\n");
@@ -359,6 +357,12 @@ void __init find_legacy_serial_ports(void)
index = add_legacy_soc_port(np, np);
if (index >= 0 && np == stdout)
legacy_serial_console = index;
+ if (of_property_read_u32(np, "reg-shift",
+ ®shift) == 0) {
+ legacy_serial_infos
+ [legacy_serial_console].regshift =
+ regshift;
+ }
}
}
of_node_put(parent);
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 6837f83..e0cb7dc 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -47,12 +47,29 @@ struct NS16550 {
#define LCR_DLAB 0x80
+static unsigned int reg_shift;
+#define ns16550_offset(addr) (addr - (unsigned char *)udbg_comport)
+
static struct NS16550 __iomem *udbg_comport;
+static inline u8 serial_read(unsigned char *addr)
+{
+ u32 offset = ns16550_offset(addr) << reg_shift;
+ return readb(udbg_comport + offset);
+}
+
+static inline void serial_write(unsigned char *addr, char val)
+{
+ u32 offset = ns16550_offset(addr) << reg_shift;
+ writeb(val, udbg_comport + offset);
+}
+
static void udbg_550_flush(void)
{
+ u32 timeout = 1000;
if (udbg_comport) {
- while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0)
+ while (((serial_read(&udbg_comport->lsr) & LSR_THRE) == 0)
+ && --timeout)
/* wait for idle */;
}
}
@@ -63,15 +80,15 @@ static void udbg_550_putc(char c)
if (c == '\n')
udbg_550_putc('\r');
udbg_550_flush();
- out_8(&udbg_comport->thr, c);
+ serial_write(&udbg_comport->thr, c);
}
}
static int udbg_550_getc_poll(void)
{
if (udbg_comport) {
- if ((in_8(&udbg_comport->lsr) & LSR_DR) != 0)
- return in_8(&udbg_comport->rbr);
+ if ((serial_read(&udbg_comport->lsr) & LSR_DR) != 0)
+ return serial_read(&udbg_comport->rbr);
else
return -1;
}
@@ -81,15 +98,15 @@ static int udbg_550_getc_poll(void)
static int udbg_550_getc(void)
{
if (udbg_comport) {
- while ((in_8(&udbg_comport->lsr) & LSR_DR) == 0)
+ while ((serial_read(&udbg_comport->lsr) & LSR_DR) == 0)
/* wait for char */;
- return in_8(&udbg_comport->rbr);
+ return serial_read(&udbg_comport->rbr);
}
return -1;
}
void udbg_init_uart(void __iomem *comport, unsigned int speed,
- unsigned int clock)
+ unsigned int clock, unsigned int regshift)
{
unsigned int dll, base_bauds;
@@ -103,22 +120,23 @@ void udbg_init_uart(void __iomem *comport, unsigned int speed,
if (comport) {
udbg_comport = (struct NS16550 __iomem *)comport;
- out_8(&udbg_comport->lcr, 0x00);
- out_8(&udbg_comport->ier, 0xff);
- out_8(&udbg_comport->ier, 0x00);
- out_8(&udbg_comport->lcr, LCR_DLAB);
- out_8(&udbg_comport->dll, dll & 0xff);
- out_8(&udbg_comport->dlm, dll >> 8);
+ serial_write(&udbg_comport->lcr, 0x00);
+ serial_write(&udbg_comport->ier, 0xff);
+ serial_write(&udbg_comport->ier, 0x00);
+ serial_write(&udbg_comport->lcr, LCR_DLAB);
+ serial_write(&udbg_comport->dll, dll & 0xff);
+ serial_write(&udbg_comport->dlm, dll >> 8);
/* 8 data, 1 stop, no parity */
- out_8(&udbg_comport->lcr, 0x03);
+ serial_write(&udbg_comport->lcr, 0x03);
/* RTS/DTR */
- out_8(&udbg_comport->mcr, 0x03);
+ serial_write(&udbg_comport->mcr, 0x03);
/* Clear & enable FIFOs */
- out_8(&udbg_comport->fcr ,0x07);
+ serial_write(&udbg_comport->fcr, 0x07);
udbg_putc = udbg_550_putc;
udbg_flush = udbg_550_flush;
udbg_getc = udbg_550_getc;
udbg_getc_poll = udbg_550_getc_poll;
+ reg_shift = regshift;
}
}
@@ -128,24 +146,24 @@ unsigned int udbg_probe_uart_speed(void __iomem *comport, unsigned int clock)
u8 old_lcr;
struct NS16550 __iomem *port = comport;
- old_lcr = in_8(&port->lcr);
+ old_lcr = serial_read(&port->lcr);
/* select divisor latch registers. */
- out_8(&port->lcr, LCR_DLAB);
+ serial_write(&port->lcr, LCR_DLAB);
/* now, read the divisor */
- dll = in_8(&port->dll);
- dlm = in_8(&port->dlm);
+ dll = serial_read(&port->dll);
+ dlm = serial_read(&port->dlm);
divisor = dlm << 8 | dll;
/* check prescaling */
- if (in_8(&port->mcr) & 0x80)
+ if (serial_read(&port->mcr) & 0x80)
prescaler = 4;
else
prescaler = 1;
/* restore the LCR */
- out_8(&port->lcr, old_lcr);
+ serial_write(&port->lcr, old_lcr);
/* calculate speed */
speed = (clock / prescaler) / (divisor * 16);
@@ -341,7 +359,7 @@ void __init udbg_init_wsp(void)
{
udbg_comport = (struct NS16550 __iomem *)WSP_UART_VIRT;
- udbg_init_uart(udbg_comport, 57600, 50000000);
+ udbg_init_uart(udbg_comport, 57600, 50000000, 0);
udbg_putc = udbg_wsp_putc;
udbg_flush = udbg_wsp_flush;
--
1.6.1.rc3
^ permalink raw reply related
* [PATCH 4/5] powerpc: config: 40x: Add 16650 UART support in klondike defconfig
From: Tanmay Inamdar @ 2012-04-02 6:39 UTC (permalink / raw)
To: benh, jwboyer, grant.likely, linuxppc-dev, linux-kernel,
devicetree-discuss
Cc: Tanmay Inamdar
In-Reply-To: <1333348747-12713-3-git-send-email-tinamdar@apm.com>
Adding 16650 UART support in klondike_defconfig for APM8018X SOC
Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
---
:100644 100644 c0d228d... c35c345... M arch/powerpc/configs/40x/klondike_defconfig
arch/powerpc/configs/40x/klondike_defconfig | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/configs/40x/klondike_defconfig b/arch/powerpc/configs/40x/klondike_defconfig
index c0d228d..c35c345 100644
--- a/arch/powerpc/configs/40x/klondike_defconfig
+++ b/arch/powerpc/configs/40x/klondike_defconfig
@@ -30,6 +30,12 @@ CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
--
1.6.1.rc3
^ permalink raw reply related
* [PATCH 3/5] powerpc: dts: klondike: Add UART nodes
From: Tanmay Inamdar @ 2012-04-02 6:39 UTC (permalink / raw)
To: benh, jwboyer, grant.likely, linuxppc-dev, linux-kernel,
devicetree-discuss
Cc: Tanmay Inamdar
In-Reply-To: <1333348747-12713-2-git-send-email-tinamdar@apm.com>
Adding UART nodes in Klondike device tree file.
Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
---
:100644 100644 4ff2852... d5bf2e1... M arch/powerpc/boot/dts/klondike.dts
arch/powerpc/boot/dts/klondike.dts | 24 ++++++++++++++++++++++++
1 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts
index 4ff2852..d5bf2e1 100644
--- a/arch/powerpc/boot/dts/klondike.dts
+++ b/arch/powerpc/boot/dts/klondike.dts
@@ -222,6 +222,30 @@
#size-cells = <1>;
ranges;
clock-frequency = <0>;
+
+ UART0: serial@50001000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x50001000 0x00000100>;
+ virtual-reg = <0x50001000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <115200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x0 0x4>;
+ reg-shift = <2>;
+ };
+
+ UART1: serial@50002000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x50002000 0x00000100>;
+ virtual-reg = <0x50002000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <115200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1 0x4>;
+ reg-shift = <2>;
+ };
};
};
};
--
1.6.1.rc3
^ permalink raw reply related
* [PATCH 2/5] powerpc: 40x: Add AHB, APB of_device_ids
From: Tanmay Inamdar @ 2012-04-02 6:39 UTC (permalink / raw)
To: benh, jwboyer, grant.likely, linuxppc-dev, linux-kernel,
devicetree-discuss
Cc: Tanmay Inamdar
In-Reply-To: <1333348747-12713-1-git-send-email-tinamdar@apm.com>
Adding of_device_id's for AHB and APB buses used in klondike (APM8018X) in
platforms/40x/ppc40x_simple.c file
Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
---
:100644 100644 9761206... 7b518ed... M arch/powerpc/platforms/40x/ppc40x_simple.c
arch/powerpc/platforms/40x/ppc40x_simple.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index 9761206..7b518ed 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -29,6 +29,8 @@ static __initdata struct of_device_id ppc40x_of_bus[] = {
{ .compatible = "ibm,plb4", },
{ .compatible = "ibm,opb", },
{ .compatible = "ibm,ebc", },
+ { .compatible = "apm,ahb", },
+ { .compatible = "apm,apb", },
{ .compatible = "simple-bus", },
{},
};
--
1.6.1.rc3
^ permalink raw reply related
* [PATCH 1/5] powerpc: dts: klondike: Add AHB, APB bus; remove OPB bus
From: Tanmay Inamdar @ 2012-04-02 6:39 UTC (permalink / raw)
To: benh, jwboyer, grant.likely, linuxppc-dev, linux-kernel,
devicetree-discuss
Cc: Tanmay Inamdar
Add entries in klondike device tree for AHB and APB bus and remove entry for
non-existent OPB bus inherited from legacy code.
Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
---
:100644 100644 8c94290... 4ff2852... M arch/powerpc/boot/dts/klondike.dts
arch/powerpc/boot/dts/klondike.dts | 167 ++++++++++++++++++-----------------
1 files changed, 86 insertions(+), 81 deletions(-)
diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts
index 8c94290..4ff2852 100644
--- a/arch/powerpc/boot/dts/klondike.dts
+++ b/arch/powerpc/boot/dts/klondike.dts
@@ -132,96 +132,101 @@
/*RXDE*/ 0x3 0x4>;
};
- POB0: opb {
- compatible = "ibm,opb";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x20000000 0x20000000 0x30000000
- 0x50000000 0x50000000 0x10000000
- 0x60000000 0x60000000 0x10000000
- 0xFE000000 0xFE000000 0x00010000>;
- dcr-reg = <0x100 0x020>;
- clock-frequency = <300000000>; /* Filled in by U-Boot */
+ RGMII0: emac-rgmii@400a2000 {
+ compatible = "ibm,rgmii";
+ reg = <0x400a2000 0x00000010>;
+ has-mdio;
+ };
- RGMII0: emac-rgmii@400a2000 {
- compatible = "ibm,rgmii";
- reg = <0x400a2000 0x00000010>;
- has-mdio;
- };
+ TAH0: emac-tah@400a3000 {
+ compatible = "ibm,tah";
+ reg = <0x400a3000 0x100>;
+ };
- TAH0: emac-tah@400a3000 {
- compatible = "ibm,tah";
- reg = <0x400a3000 0x100>;
- };
+ TAH1: emac-tah@400a4000 {
+ compatible = "ibm,tah";
+ reg = <0x400a4000 0x100>;
+ };
- TAH1: emac-tah@400a4000 {
- compatible = "ibm,tah";
- reg = <0x400a4000 0x100>;
- };
+ EMAC0: ethernet@400a0000 {
+ compatible = "ibm,emac4", "ibm-emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>;
+ reg = <0x400a0000 0x00000100>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0x0>;
+ mal-rx-channel = <0x0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "rgmii";
+ phy-address = <0x2>;
+ turbo = "no";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
- EMAC0: ethernet@400a0000 {
- compatible = "ibm,emac4", "ibm-emac4sync";
- interrupt-parent = <&EMAC0>;
- interrupts = <0x0>;
- #interrupt-cells = <1>;
- #address-cells = <0>;
- #size-cells = <0>;
- interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>;
- reg = <0x400a0000 0x00000100>;
- local-mac-address = [000000000000]; /* Filled in by U-Boot */
- mal-device = <&MAL0>;
- mal-tx-channel = <0x0>;
- mal-rx-channel = <0x0>;
- cell-index = <0>;
- max-frame-size = <9000>;
- rx-fifo-size = <4096>;
- tx-fifo-size = <2048>;
- phy-mode = "rgmii";
- phy-address = <0x2>;
- turbo = "no";
- phy-map = <0x00000000>;
- rgmii-device = <&RGMII0>;
- rgmii-channel = <0>;
- tah-device = <&TAH0>;
- tah-channel = <0>;
- has-inverted-stacr-oc;
- has-new-stacr-staopc;
- };
+ EMAC1: ethernet@400a1000 {
+ compatible = "ibm,emac4", "ibm-emac4sync";
+ status = "disabled";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>;
+ reg = <0x400a1000 0x00000100>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "rgmii";
+ phy-address = <0x3>;
+ turbo = "no";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
- EMAC1: ethernet@400a1000 {
- compatible = "ibm,emac4", "ibm-emac4sync";
- status = "disabled";
- interrupt-parent = <&EMAC1>;
- interrupts = <0x0>;
- #interrupt-cells = <1>;
- #address-cells = <0>;
- #size-cells = <0>;
- interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>;
- reg = <0x400a1000 0x00000100>;
- local-mac-address = [000000000000]; /* Filled in by U-Boot */
- mal-device = <&MAL0>;
- mal-tx-channel = <1>;
- mal-rx-channel = <8>;
- cell-index = <1>;
- max-frame-size = <9000>;
- rx-fifo-size = <4096>;
- tx-fifo-size = <2048>;
- phy-mode = "rgmii";
- phy-address = <0x3>;
- turbo = "no";
- phy-map = <0x00000000>;
- rgmii-device = <&RGMII0>;
- rgmii-channel = <1>;
- tah-device = <&TAH1>;
- tah-channel = <0>;
- has-inverted-stacr-oc;
- has-new-stacr-staopc;
- mdio-device = <&EMAC0>;
+ AHB: ahb {
+ compatible = "apm,ahb";
+ dcr-reg = <0xc 0x2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ APB: apb {
+ compatible = "apm,apb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>;
};
};
};
chosen {
- linux,stdout-path = "/plb/opb/serial@50001000";
+ linux,stdout-path = "/plb/ahb/apb/serial@50001000";
};
};
--
1.6.1.rc3
^ permalink raw reply related
* Re: kilauea compilation breaks with v3.3 kernel and ELDK 4.2
From: Tony Breeds @ 2012-04-02 6:28 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Frank E. Svendsbøe, Wolfgang Denk, robert.karl.berger,
linuxppc-dev
In-Reply-To: <1333332115.30734.27.camel@pasglop>
[-- Attachment #1: Type: text/plain, Size: 3877 bytes --]
On Mon, Apr 02, 2012 at 12:01:55PM +1000, Benjamin Herrenschmidt wrote:
> Ok, I've asked Tony to have a look at splitting the build decision
> in arch/powerpc/boot along the same lines as the CPU families... ie only
> wrappers for platforms potentially supported by the built kernel. That
> should fix it.
Please try this patch. Only lightly tested here. I haven't "split up"
src-wlib yet as I wanted to verify I'm on the right track.
From e0b1ac84bfd539482bc88b943724e577e6b8dfb3 Mon Sep 17 00:00:00 2001
From: Tony Breeds <tony@bakeyournoodle.com>
Date: Mon, 2 Apr 2012 16:20:35 +1000
Subject: [PATCH] powerpc/boot: Only build board support files when required.
Currently we build all board files regardless of the final zImage
target. This is sub-optimal (in terms on compilation) and leads to
problems in one platform needlessly causing failures for other
platforms.
Use the Kconfig variables to selectively construct this board files to
build.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
---
arch/powerpc/boot/Makefile | 56 +++++++++++++++++++++++++++++++++----------
1 files changed, 43 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index e8461cb..a3c4ae0 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -69,19 +69,49 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
fsl-soc.c mpc8xx.c pq2.c ugecon.c
-src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
- cuboot-ebony.c cuboot-hotfoot.c epapr.c treeboot-ebony.c \
- prpmc2800.c \
- ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
- cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
- cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
- fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
- cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
- cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
- virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
- cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
- gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \
- treeboot-currituck.c
+src-plat := of.c
+ifeq ($(CONFIG_40x),y)
+src-plat += fixed-head.S ep405.c cuboot-hotfoot.c treeboot-walnut.c \
+ cuboot-acadia.c cuboot-kilauea.c \
+ simpleboot.c virtex405-head.S virtex.c
+endif
+ifeq ($(CONFIG_44x),y)
+src-plat += treeboot-ebony cuboot-ebony treeboot-bamboo cuboot-bamboo \
+ cuboot-sam440ep.c cuboot-sequoia.c cuboot-rainier.c \
+ cuboot-taishan.c cuboot-katmai.c cuboot-warp.c \
+ cuboot-yosemite.c treeboot-iss4xx.c treeboot-currituck.c \
+ simpleboot.c fixed-head.S virtex.c
+endif
+ifeq ($(CONFIG_8xx),y)
+src-plat += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
+endif
+ifeq ($(CONFIG_PPC_MPC52xx),y)
+src-plat += cuboot-52xx.c
+endif
+ifeq ($(CONFIG_PPC_82xx),y)
+src-plat += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
+endif
+ifeq ($(CONFIG_PPC_82xx),y)
+src-plat += cuboot-83xx.c fixed-head.S redboot-83xx.c
+endif
+ifeq ($(CONFIG_FSL_SOC_BOOKE),y)
+src-plat += cuboot-85xx.c cuboot-85xx-cpm2.c
+endif
+ifeq ($(CONFIG_EMBEDDED6xx),y)
+src-plat += cuboot-pq2.c cuboot-mpc7448hpc2.c cuboot-c2k.c \
+ gamecube-head.S gamecube.c wii-head.S wii.c holly.c \
+ prpmc2800.c
+endif
+ifeq ($(CONFIG_AMIGAONE),y)
+src-plat += cuboot-amigaone.c
+endif
+ifeq ($(CONFIG_PPC_PS3),y)
+src-plat += ps3-head.S ps3-hvcall.S ps3.c
+endif
+ifeq ($(CONFIG_EPAPR_BOOT),y)
+src-plat += epapr.c
+endif
+src-plat := $(sort $(src-plat))
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
--
1.7.7.6
Yours Tony
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply related
* [git pull] Please pull powerpc.git merge branch
From: Benjamin Herrenschmidt @ 2012-04-02 4:39 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linuxppc-dev list, Andrew Morton, Linux Kernel list
Hi Linus !
This contains a couple more fixes for the system.h disintegration,
a trivial section mismatch fix, a couple of patches from akpm that I
didn't quite get he expected me to pickup, and a few more trivialities
form Kumar that he appear to have forgotten to send me in the previous
batch.
Cheers,
Ben.
The following changes since commit dd775ae2549217d3ae09363e3edb305d0fa19928:
Linux 3.4-rc1 (2012-03-31 16:24:09 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git merge
for you to fetch changes up to 9b218f63e50e590fe0c7724a0838d7eaa6dae5ce:
powerpc/eeh: Fix use of set_current_state() in eeh event handling set_current_state() wart (2012-04-02 14:31:19 +1000)
----------------------------------------------------------------
Andrew Morton (1):
powerpc/eeh: Fix use of set_current_state() in eeh event handling set_current_state() wart
Benjamin Herrenschmidt (2):
Merge remote-tracking branch 'kumar/next' into merge
powerpc/kvm: Fallout from system.h disintegration
Dave Liu (1):
powerpc/qe: Update the SNUM table for MPC8569 Rev2.0
Diana CRACIUN (1):
powerpc/dts: Removed fsl,msi property from dts.
Jerry Huang (2):
powerpc/85xx: add the P1020MBG-PC DTS support
powerpc/85xx: add the P1020UTM-PC DTS support
Oleg Nesterov (1):
powerpc/eeh: Remove eeh_event_handler()->daemonize()
Shaveta Leekha (1):
powerpc/85xx: Enable I2C_CHARDEV and I2C_MPC options in defconfigs
Stephen Rothwell (1):
powerpc: Fix fallout from system.h split up
Timur Tabi (2):
powerpc/8xxx: remove 85xx/86xx restrictions from fsl_guts.h
powerpc/epapr: add "memory" as a clobber to all hypercalls
Uwe Kleine-König (1):
powerpc: Mark const init data with __initconst instead of __initdata
arch/powerpc/boot/dts/p1020mbg-pc.dtsi | 151 ++++++++++++++++++++++++++
arch/powerpc/boot/dts/p1020mbg-pc_32b.dts | 89 +++++++++++++++
arch/powerpc/boot/dts/p1020mbg-pc_36b.dts | 89 +++++++++++++++
arch/powerpc/boot/dts/p1020utm-pc.dtsi | 140 ++++++++++++++++++++++++
arch/powerpc/boot/dts/p1020utm-pc_32b.dts | 89 +++++++++++++++
arch/powerpc/boot/dts/p1020utm-pc_36b.dts | 89 +++++++++++++++
arch/powerpc/boot/dts/p2041rdb.dts | 3 -
arch/powerpc/boot/dts/p3041ds.dts | 4 -
arch/powerpc/boot/dts/p3060qds.dts | 2 -
arch/powerpc/boot/dts/p4080ds.dts | 3 -
arch/powerpc/boot/dts/p5020ds.dts | 4 -
arch/powerpc/configs/corenet32_smp_defconfig | 1 +
arch/powerpc/configs/corenet64_smp_defconfig | 2 +
arch/powerpc/configs/mpc85xx_defconfig | 1 +
arch/powerpc/configs/mpc85xx_smp_defconfig | 1 +
arch/powerpc/include/asm/epapr_hcalls.h | 7 +-
arch/powerpc/include/asm/fsl_guts.h | 26 +----
arch/powerpc/kernel/fadump.c | 2 +
arch/powerpc/kernel/kgdb.c | 1 +
arch/powerpc/kvm/book3s_emulate.c | 1 +
arch/powerpc/kvm/book3s_paired_singles.c | 1 +
arch/powerpc/kvm/book3s_pr.c | 1 +
arch/powerpc/platforms/52xx/mpc52xx_pci.c | 2 +-
arch/powerpc/platforms/85xx/mpc85xx_mds.c | 2 +-
arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 2 +-
arch/powerpc/platforms/85xx/p1022_ds.c | 4 +-
arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 2 +-
arch/powerpc/platforms/cell/qpace_setup.c | 2 +-
arch/powerpc/platforms/cell/setup.c | 2 +-
arch/powerpc/platforms/pseries/eeh_event.c | 4 +-
arch/powerpc/sysdev/qe_lib/qe.c | 22 +++-
drivers/net/ethernet/freescale/ucc_geth.c | 6 +-
sound/soc/fsl/mpc8610_hpcd.c | 8 +-
sound/soc/fsl/p1022_ds.c | 10 +-
34 files changed, 712 insertions(+), 61 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1020mbg-pc.dtsi
create mode 100644 arch/powerpc/boot/dts/p1020mbg-pc_32b.dts
create mode 100644 arch/powerpc/boot/dts/p1020mbg-pc_36b.dts
create mode 100644 arch/powerpc/boot/dts/p1020utm-pc.dtsi
create mode 100644 arch/powerpc/boot/dts/p1020utm-pc_32b.dts
create mode 100644 arch/powerpc/boot/dts/p1020utm-pc_36b.dts
^ permalink raw reply
* Re: [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead
From: Benjamin Herrenschmidt @ 2012-04-02 4:21 UTC (permalink / raw)
To: Andreas Schwab
Cc: devicetree-discuss, linux-kernel, Rob Herring, Milton Miller,
Thomas Gleixner, linuxppc-dev, linux-arm-kernel
In-Reply-To: <m2iphj3zxr.fsf@igel.home>
On Sun, 2012-04-01 at 23:27 +0200, Andreas Schwab wrote:
> Grant Likely <grant.likely@secretlab.ca> writes:
>
> > This patch drops the powerpc-specific irq_map table and replaces it with
> > directly using the irq_alloc_desc()/irq_free_desc() interfaces for allocating
> > and freeing irq_desc structures.
>
> This breaks irqs on PowerMac G5. I see lost irq errors from the sata
> driver.
>
> Note that the breakage only started after the series was merged into
> mainline. But when transplanted upon the parent of the merge this is
> the commit that was blamed by bisect. So something changed between
> v3.3-rc3 and the merge of this series that broke it.
can you tell me more ? (What machine precisely, what .config etc...) ?
I tested here on two G5's:
- PowerMac7,3 aka Dual G5 AGP. This ones has U3 + K2 and
uses cascaded MPICs
- PowerMac11,2 aka Quad G5. This one has U4 + K2 and uses a single MPIC
in the northbridge
And both appear to work fine with today upstream (basically -rc1).
Cheers,
Ben.
^ permalink raw reply
* powerpc/kvm: Fallout from system.h disintegration
From: Benjamin Herrenschmidt @ 2012-04-02 3:35 UTC (permalink / raw)
To: linuxppc-dev
Add a missing include to fix build
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/kvm/book3s_emulate.c | 1 +
arch/powerpc/kvm/book3s_paired_singles.c | 1 +
arch/powerpc/kvm/book3s_pr.c | 1 +
3 files changed, 3 insertions(+)
diff --git a/arch/powerpc/kvm/book3s_emulate.c b/arch/powerpc/kvm/book3s_emulate.c
index f1950d1..135663a 100644
--- a/arch/powerpc/kvm/book3s_emulate.c
+++ b/arch/powerpc/kvm/book3s_emulate.c
@@ -21,6 +21,7 @@
#include <asm/disassemble.h>
#include <asm/kvm_book3s.h>
#include <asm/reg.h>
+#include <asm/switch_to.h>
#define OP_19_XOP_RFID 18
#define OP_19_XOP_RFI 50
diff --git a/arch/powerpc/kvm/book3s_paired_singles.c b/arch/powerpc/kvm/book3s_paired_singles.c
index e70ef2d..a59a25a 100644
--- a/arch/powerpc/kvm/book3s_paired_singles.c
+++ b/arch/powerpc/kvm/book3s_paired_singles.c
@@ -24,6 +24,7 @@
#include <asm/kvm_fpu.h>
#include <asm/reg.h>
#include <asm/cacheflush.h>
+#include <asm/switch_to.h>
#include <linux/vmalloc.h>
/* #define DEBUG */
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 7340e10..642d885 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -33,6 +33,7 @@
#include <asm/kvm_ppc.h>
#include <asm/kvm_book3s.h>
#include <asm/mmu_context.h>
+#include <asm/switch_to.h>
#include <linux/gfp.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>
--
1.7.9.5
^ permalink raw reply related
* Re: kilauea compilation breaks with v3.3 kernel and ELDK 4.2
From: Benjamin Herrenschmidt @ 2012-04-02 2:01 UTC (permalink / raw)
To: Frank E. Svendsbøe; +Cc: linuxppc-dev, Wolfgang Denk, robert.karl.berger
In-Reply-To: <20120401221359.GA31730@gnubox>
On Mon, 2012-04-02 at 00:14 +0200, Frank E. Svendsbøe wrote:
> On Sat, Mar 31, 2012 at 11:03:04AM +1100, Benjamin Herrenschmidt wrote:
> > On Sat, 2012-03-31 at 00:53 +0200, Frank Svendsbøe wrote:
> >
> > > Hi Josh Boyer,
> > >
> > > just wanted to add that I'm experiencing the same problem that Robert
> > > reported, but on 8xx instead of 4xx. The mpc8xx does not support the
> > > mfdcrx instruction, so maybe it's more to it than just a binutils bug?
> >
> > The kernel shouldn't have tried to build that instruction on 8xx, though
> > I suppose if it's in arch/powerpc/boot, we are a bit too eager at
> > building everything including what's not relevant, we might to be a bit
> > more careful at excluding 4xx stuff on a 8xx kernel.
> >
>
> Yes. I agree on Wolfgangs statement regarding not building code we
> don't want/need. Please explain to me why src-wlib/src-plat in
> arch/powerpc/boot/Makefile includes every ppc target...
Ok, I've asked Tony to have a look at splitting the build decision
in arch/powerpc/boot along the same lines as the CPU families... ie only
wrappers for platforms potentially supported by the built kernel. That
should fix it.
Cheers,
Ben.
^ permalink raw reply
* Re: kilauea compilation breaks with v3.3 kernel and ELDK 4.2
From: Frank E. Svendsbøe @ 2012-04-01 22:14 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev, Wolfgang Denk, robert.karl.berger
In-Reply-To: <1333152184.30734.3.camel@pasglop>
On Sat, Mar 31, 2012 at 11:03:04AM +1100, Benjamin Herrenschmidt wrote:
> On Sat, 2012-03-31 at 00:53 +0200, Frank Svendsbøe wrote:
>
> > Hi Josh Boyer,
> >
> > just wanted to add that I'm experiencing the same problem that Robert
> > reported, but on 8xx instead of 4xx. The mpc8xx does not support the
> > mfdcrx instruction, so maybe it's more to it than just a binutils bug?
>
> The kernel shouldn't have tried to build that instruction on 8xx, though
> I suppose if it's in arch/powerpc/boot, we are a bit too eager at
> building everything including what's not relevant, we might to be a bit
> more careful at excluding 4xx stuff on a 8xx kernel.
>
Yes. I agree on Wolfgangs statement regarding not building code we
don't want/need. Please explain to me why src-wlib/src-plat in
arch/powerpc/boot/Makefile includes every ppc target...
> Can you give us the exact error ?
>
Yes. The problem is caused by commit 228d550 by Tony Breeds
arch/powerpc/boot/treeboot-currituck.c:50
reg = mfdcrx(DDR3_MR0CF + i);
--
Best regards,
Frank
^ permalink raw reply
* Re: [PATCH v5 06/27] irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead
From: Andreas Schwab @ 2012-04-01 21:27 UTC (permalink / raw)
To: Grant Likely
Cc: devicetree-discuss, linux-kernel, Milton Miller, Rob Herring,
Thomas Gleixner, linuxppc-dev, linux-arm-kernel
In-Reply-To: <1329383368-12122-7-git-send-email-grant.likely@secretlab.ca>
Grant Likely <grant.likely@secretlab.ca> writes:
> This patch drops the powerpc-specific irq_map table and replaces it with
> directly using the irq_alloc_desc()/irq_free_desc() interfaces for allocating
> and freeing irq_desc structures.
This breaks irqs on PowerMac G5. I see lost irq errors from the sata
driver.
Note that the breakage only started after the series was merged into
mainline. But when transplanted upon the parent of the merge this is
the commit that was blamed by bisect. So something changed between
v3.3-rc3 and the merge of this series that broke it.
Andreas.
--
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox