* [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address
From: Kirill A. Shutemov @ 2012-08-16 15:15 UTC (permalink / raw)
To: linux-mm
Cc: linux-mips, linux-sh, Jan Beulich, H. Peter Anvin, sparclinux,
Andrea Arcangeli, Andi Kleen, Robert Richter, x86, Hugh Dickins,
Ingo Molnar, Mel Gorman, Alex Shi, Thomas Gleixner,
KAMEZAWA Hiroyuki, Tim Chen, linux-kernel, Andy Lutomirski,
Johannes Weiner, Andrew Morton, linuxppc-dev, Kirill A. Shutemov
In-Reply-To: <1345130154-9602-1-git-send-email-kirill.shutemov@linux.intel.com>
From: Andi Kleen <ak@linux.intel.com>
Clearing a 2MB huge page will typically blow away several levels
of CPU caches. To avoid this only cache clear the 4K area
around the fault address and use a cache avoiding clears
for the rest of the 2MB area.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
---
mm/memory.c | 34 +++++++++++++++++++++++++++++-----
1 files changed, 29 insertions(+), 5 deletions(-)
diff --git a/mm/memory.c b/mm/memory.c
index dfc179b..d4626b9 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3969,18 +3969,34 @@ EXPORT_SYMBOL(might_fault);
#endif
#if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined(CONFIG_HUGETLBFS)
+
+#ifndef ARCH_HAS_USER_NOCACHE
+#define ARCH_HAS_USER_NOCACHE 0
+#endif
+
+#if ARCH_HAS_USER_NOCACHE == 0
+#define clear_user_highpage_nocache clear_user_highpage
+#endif
+
static void clear_gigantic_page(struct page *page,
- unsigned long addr,
- unsigned int pages_per_huge_page)
+ unsigned long haddr, unsigned long fault_address,
+ unsigned int pages_per_huge_page)
{
int i;
struct page *p = page;
+ unsigned long vaddr;
+ int target = (fault_address - haddr) >> PAGE_SHIFT;
might_sleep();
+ vaddr = haddr;
for (i = 0; i < pages_per_huge_page;
i++, p = mem_map_next(p, page, i)) {
cond_resched();
- clear_user_highpage(p, addr + i * PAGE_SIZE);
+ vaddr = haddr + i*PAGE_SIZE;
+ if (!ARCH_HAS_USER_NOCACHE || i == target)
+ clear_user_highpage(p, vaddr);
+ else
+ clear_user_highpage_nocache(p, vaddr);
}
}
void clear_huge_page(struct page *page,
@@ -3988,16 +4004,24 @@ void clear_huge_page(struct page *page,
unsigned int pages_per_huge_page)
{
int i;
+ unsigned long vaddr;
+ int target = (fault_address - haddr) >> PAGE_SHIFT;
if (unlikely(pages_per_huge_page > MAX_ORDER_NR_PAGES)) {
- clear_gigantic_page(page, haddr, pages_per_huge_page);
+ clear_gigantic_page(page, haddr, fault_address,
+ pages_per_huge_page);
return;
}
might_sleep();
+ vaddr = haddr;
for (i = 0; i < pages_per_huge_page; i++) {
cond_resched();
- clear_user_highpage(page + i, haddr + i * PAGE_SIZE);
+ vaddr = haddr + i*PAGE_SIZE;
+ if (!ARCH_HAS_USER_NOCACHE || i == target)
+ clear_user_highpage(page + i, vaddr);
+ else
+ clear_user_highpage_nocache(page + i, vaddr);
}
}
--
1.7.7.6
^ permalink raw reply related
* Re: therm_pm72 units, interface
From: Jan Engelhardt @ 2012-08-16 15:24 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <1345066551.11751.1.camel@pasglop>
On Wednesday 2012-08-15 23:35, Benjamin Herrenschmidt wrote:
>> XServe G5 of mine started powering off more or less
>> randomly
>
>BTW. There's a new windfarm driver for these in recent kernels...
>
>Appart from that, the trip points are coming from a calibration EEPROM,
>you may want to tweak the driver to warn a bit earlier or that sort of
>things ? (Or just to print more things out ?)
If you have more things to print/offer via sysfs, I'm all for it.
The XsG5 really has (by looking into the casing): 1 PCI Fan,
6 center fans, 1 PSU intake and 1 PSU outblow fan (this last one
seems rather slow-turning, but maybe that's normal).
It is not quite clear which is which in the sysfs display.
What I did figure out: at the PROM, fans run at what seems
to be full speed (some 8000-9000 rpm?). Once Linux and therm_pm72
are loaded, the fans settle down towards 4000 rpm, and if the machine
has warmed up, that is then when it powers off. (The kernel is indeed
3.4. I now need to figure out how to place a new kernel on it without
it powering off inbetween.)
>> $ cd /sys/devices/temperature; grep '' *;
>> backside_fan_pwm:32
>> backside_temperature:54.000
>> cpu0_current:34.423
>> cpu0_exhaust_fan_rpm:5340
>> cpu0_intake_fan_rpm:5340
>> cpu0_temperature:72.889
>> cpu0_voltage:1.252
>> cpu1_current:34.179
>> cpu1_exhaust_fan_rpm:4584
>> cpu1_intake_fan_rpm:4584
>> cpu1_temperature:68.526
>> cpu1_voltage:1.259
>> dimms_temperature:53.000
>> grep: driver: Er en filkatalog
>> modalias:platform:temperature
>> grep: power: Er en filkatalog
>> slots_fan_pwm:20
>> slots_temperature:38.500
>> grep: subsystem: Er en filkatalog
>> uevent:DRIVER=temperature
>> uevent:OF_NAME=fan
>> uevent:OF_FULLNAME=/u3@0,f8000000/i2c@f8001000/fan@15e
>> uevent:OF_TYPE=fcu
>> uevent:OF_COMPATIBLE_0=fcu
>> uevent:OF_COMPATIBLE_N=1
>> uevent:MODALIAS=of:NfanTfcuCfcu
^ permalink raw reply
* Re: [PATCH v3 2/2] powerpc: Uprobes port to powerpc
From: Oleg Nesterov @ 2012-08-16 15:21 UTC (permalink / raw)
To: Ananth N Mavinakayanahalli
Cc: Srikar Dronamraju, peterz, lkml, Paul Mackerras, Anton Blanchard,
Ingo Molnar, linuxppc-dev
In-Reply-To: <20120816050030.GA12060@in.ibm.com>
On 08/16, Ananth N Mavinakayanahalli wrote:
>
> On Thu, Aug 16, 2012 at 07:41:53AM +1000, Benjamin Herrenschmidt wrote:
> > On Wed, 2012-08-15 at 18:59 +0200, Oleg Nesterov wrote:
> > > On 07/26, Ananth N Mavinakayanahalli wrote:
> > > >
> > > > From: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
> > > >
> > > > This is the port of uprobes to powerpc. Usage is similar to x86.
> > >
> > > I am just curious why this series was ignored by powerpc maintainers...
> >
> > Because it arrived too late for the previous merge window considering my
> > limited bandwidth for reviewing things and that nobody else seems to
> > have reviewed it :-)
> >
> > It's still on track for the next one, and I'm hoping to dedicate most of
> > next week going through patches & doing a powerpc -next.
>
> Thanks Ben!
Great!
> > > Just one question... Shouldn't arch_uprobe_pre_xol() forbid to probe
> > > UPROBE_SWBP_INSN (at least) ?
> > >
> > > (I assume that emulate_step() can't handle this case but of course I
> > > do not understand arch/powerpc/lib/sstep.c)
> > >
> > > Note that uprobe_pre_sstep_notifier() sets utask->state = UTASK_BP_HIT
> > > without any checks. This doesn't look right if it was UTASK_SSTEP...
> > >
> > > But again, I do not know what powepc will actually do if we try to
> > > single-step over UPROBE_SWBP_INSN.
> >
> > Ananth ?
>
> set_swbp() will return -EEXIST to install_breakpoint if we are trying to
> put a breakpoint on UPROBE_SWBP_INSN.
not really, this -EEXIST (already removed by recent changes) means that
bp was already installed.
But this doesn't matter,
> So, the arch agnostic code itself
> takes care of this case...
Yes. I forgot about install_breakpoint()->is_swbp_insn() check which
returns -ENOTSUPP, somehow I thought arch_uprobe_analyze_insn() does
this.
> or am I missing something?
No, it is me.
> However, I see that we need a powerpc specific is_swbp_insn()
> implementation since we will have to take care of all the trap variants.
Hmm, I am not sure. is_swbp_insn(insn), as it is used in the arch agnostic
code, should only return true if insn == UPROBE_SWBP_INSN (just in case,
this logic needs more fixes but this is offtopic).
If powerpc has another insn(s) which can trigger powerpc's do_int3()
counterpart, they should be rejected by arch_uprobe_analyze_insn().
I think.
> I will need to update the patches based on changes being made by Oleg
> and Sebastien for the single-step issues.
Perhaps you can do this in a separate change?
We need some (simple) changes in the arch agnostic code first, they
should not break poweppc. These changes are still under discussion.
Once we have "__weak arch_uprobe_step*" you can reimplement these
hooks and fix the problems with single-stepping.
Oleg.
^ permalink raw reply
* Re: [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address
From: Andrea Arcangeli @ 2012-08-16 16:16 UTC (permalink / raw)
To: Kirill A. Shutemov
Cc: linux-mips, Andi Kleen, Alex Shi, Robert Richter, linuxppc-dev,
x86, Hugh Dickins, linux-kernel, Jan Beulich, Andy Lutomirski,
Johannes Weiner, linux-mm, linux-sh, Ingo Molnar, Mel Gorman,
H. Peter Anvin, sparclinux, Thomas Gleixner, Tim Chen,
Andrew Morton, KAMEZAWA Hiroyuki
In-Reply-To: <1345130154-9602-7-git-send-email-kirill.shutemov@linux.intel.com>
Hi Kirill,
On Thu, Aug 16, 2012 at 06:15:53PM +0300, Kirill A. Shutemov wrote:
> for (i = 0; i < pages_per_huge_page;
> i++, p = mem_map_next(p, page, i)) {
It may be more optimal to avoid a multiplication/shiftleft before the
add, and to do:
for (i = 0, vaddr = haddr; i < pages_per_huge_page;
i++, p = mem_map_next(p, page, i), vaddr += PAGE_SIZE) {
> cond_resched();
> - clear_user_highpage(p, addr + i * PAGE_SIZE);
> + vaddr = haddr + i*PAGE_SIZE;
Not sure if gcc can optimize it away because of the external calls.
> + if (!ARCH_HAS_USER_NOCACHE || i == target)
> + clear_user_highpage(page + i, vaddr);
> + else
> + clear_user_highpage_nocache(page + i, vaddr);
> }
My only worry overall is if there can be some workload where this may
actually slow down userland if the CPU cache is very large and
userland would access most of the faulted in memory after the first
fault.
So I wouldn't mind to add one more check in addition of
!ARCH_HAS_USER_NOCACHE above to check a runtime sysctl variable. It'll
waste a cacheline yes but I doubt it's measurable compared to the time
it takes to do a >=2M hugepage copy.
Furthermore it would allow people to benchmark its effect without
having to rebuild the kernel themself.
All other patches looks fine to me.
Thanks!
Andrea
^ permalink raw reply
* Re: [PATCH v3 0/7] mv643xx.c: Add basic device tree support.
From: Ian Molton @ 2012-08-16 16:30 UTC (permalink / raw)
To: Arnd Bergmann
Cc: thomas.petazzoni, andrew, netdev, devicetree-discuss, ben.dooks,
linuxppc-dev, David Miller, linux-arm-kernel
In-Reply-To: <5028D040.60604@codethink.co.uk>
Ping :)
Can we get some consensus on the right approach here? I'm loathe to code
this if its going to be rejected.
I'd prefer the driver to be properly split so we dont have the MDIO
driver mapping the ethernet drivers address spaces, but if thats not
going to be merged, I'm not feeling like doing the work for nothing.
If the driver is to use the overlapping-address mapped-by-the-mdio
scheme, then so be it, but I could do with knowing.
Another point against the latter scheme is that the MDIO driver could
sensibly be used (the block is identical) on the ArmadaXP, which has 4
ethernet blocks rather than two, yet grouped in two pairs with a
discontiguous address range.
I'd like to get this moved along as soon as possible though.
-Ian
^ permalink raw reply
* Re: [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address
From: Kirill A. Shutemov @ 2012-08-16 16:43 UTC (permalink / raw)
To: Andrea Arcangeli
Cc: linux-mips, linux-sh, Jan Beulich, linux-mm, H. Peter Anvin,
sparclinux, Andi Kleen, Robert Richter, x86, Hugh Dickins,
Ingo Molnar, Mel Gorman, Alex Shi, Thomas Gleixner,
KAMEZAWA Hiroyuki, Tim Chen, linux-kernel, Andy Lutomirski,
Johannes Weiner, Andrew Morton, linuxppc-dev, Kirill A. Shutemov
In-Reply-To: <20120816161647.GM11188@redhat.com>
On Thu, Aug 16, 2012 at 06:16:47PM +0200, Andrea Arcangeli wrote:
> Hi Kirill,
>
> On Thu, Aug 16, 2012 at 06:15:53PM +0300, Kirill A. Shutemov wrote:
> > for (i = 0; i < pages_per_huge_page;
> > i++, p = mem_map_next(p, page, i)) {
>
> It may be more optimal to avoid a multiplication/shiftleft before the
> add, and to do:
>
> for (i = 0, vaddr = haddr; i < pages_per_huge_page;
> i++, p = mem_map_next(p, page, i), vaddr += PAGE_SIZE) {
>
Makes sense. I'll update it.
> > cond_resched();
> > - clear_user_highpage(p, addr + i * PAGE_SIZE);
> > + vaddr = haddr + i*PAGE_SIZE;
>
> Not sure if gcc can optimize it away because of the external calls.
>
> > + if (!ARCH_HAS_USER_NOCACHE || i == target)
> > + clear_user_highpage(page + i, vaddr);
> > + else
> > + clear_user_highpage_nocache(page + i, vaddr);
> > }
>
>
> My only worry overall is if there can be some workload where this may
> actually slow down userland if the CPU cache is very large and
> userland would access most of the faulted in memory after the first
> fault.
>
> So I wouldn't mind to add one more check in addition of
> !ARCH_HAS_USER_NOCACHE above to check a runtime sysctl variable. It'll
> waste a cacheline yes but I doubt it's measurable compared to the time
> it takes to do a >=2M hugepage copy.
Hm.. I think with static_key we can avoid cache overhead here. I'll try.
> Furthermore it would allow people to benchmark its effect without
> having to rebuild the kernel themself.
>
> All other patches looks fine to me.
Thanks, for review. Could you take a look at huge zero page patchset? ;)
--
Kirill A. Shutemov
^ permalink raw reply
* Re: [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address
From: Andrea Arcangeli @ 2012-08-16 18:29 UTC (permalink / raw)
To: Kirill A. Shutemov
Cc: linux-mips, Andi Kleen, Alex Shi, Robert Richter, linuxppc-dev,
x86, Hugh Dickins, linux-kernel, Jan Beulich, Andy Lutomirski,
Johannes Weiner, linux-mm, linux-sh, Ingo Molnar, Mel Gorman,
H. Peter Anvin, sparclinux, Thomas Gleixner, Tim Chen,
Andrew Morton, KAMEZAWA Hiroyuki
In-Reply-To: <20120816164356.GA30106@shutemov.name>
On Thu, Aug 16, 2012 at 07:43:56PM +0300, Kirill A. Shutemov wrote:
> Hm.. I think with static_key we can avoid cache overhead here. I'll try.
Could you elaborate on the static_key? Is it some sort of self
modifying code?
> Thanks, for review. Could you take a look at huge zero page patchset? ;)
I've noticed that too, nice :). I'm checking some detail on the
wrprotect fault behavior but I'll comment there.
^ permalink raw reply
* Re: [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address
From: Kirill A. Shutemov @ 2012-08-16 18:37 UTC (permalink / raw)
To: Andrea Arcangeli
Cc: linux-mips, linux-sh, Jan Beulich, linux-mm, H. Peter Anvin,
sparclinux, Andi Kleen, Robert Richter, x86, Hugh Dickins,
Ingo Molnar, Mel Gorman, Alex Shi, Thomas Gleixner,
KAMEZAWA Hiroyuki, Tim Chen, linux-kernel, Andy Lutomirski,
Johannes Weiner, Andrew Morton, linuxppc-dev, Kirill A. Shutemov
In-Reply-To: <20120816182944.GN11188@redhat.com>
On Thu, Aug 16, 2012 at 08:29:44PM +0200, Andrea Arcangeli wrote:
> On Thu, Aug 16, 2012 at 07:43:56PM +0300, Kirill A. Shutemov wrote:
> > Hm.. I think with static_key we can avoid cache overhead here. I'll try.
>
> Could you elaborate on the static_key? Is it some sort of self
> modifying code?
Runtime code patching. See Documentation/static-keys.txt. We can patch it
on sysctl.
>
> > Thanks, for review. Could you take a look at huge zero page patchset? ;)
>
> I've noticed that too, nice :). I'm checking some detail on the
> wrprotect fault behavior but I'll comment there.
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
--
Kirill A. Shutemov
^ permalink raw reply
* Re: [PATCH v3 6/7] mm: make clear_huge_page cache clear only around the fault address
From: Andrea Arcangeli @ 2012-08-16 19:42 UTC (permalink / raw)
To: Kirill A. Shutemov
Cc: linux-mips, linux-sh, Jan Beulich, linux-mm, H. Peter Anvin,
sparclinux, Andi Kleen, Robert Richter, x86, Hugh Dickins,
Ingo Molnar, Mel Gorman, Alex Shi, Thomas Gleixner,
KAMEZAWA Hiroyuki, Tim Chen, linux-kernel, Andy Lutomirski,
Johannes Weiner, Andrew Morton, linuxppc-dev, Kirill A. Shutemov
In-Reply-To: <20120816183725.GA30284@shutemov.name>
On Thu, Aug 16, 2012 at 09:37:25PM +0300, Kirill A. Shutemov wrote:
> On Thu, Aug 16, 2012 at 08:29:44PM +0200, Andrea Arcangeli wrote:
> > On Thu, Aug 16, 2012 at 07:43:56PM +0300, Kirill A. Shutemov wrote:
> > > Hm.. I think with static_key we can avoid cache overhead here. I'll try.
> >
> > Could you elaborate on the static_key? Is it some sort of self
> > modifying code?
>
> Runtime code patching. See Documentation/static-keys.txt. We can patch it
> on sysctl.
I guessed it had to be patching the code, thanks for the
pointer. It looks a perfect fit for this one agreed.
^ permalink raw reply
* Re: [PATCH] scsi/ibmvscsi: /sys/class/scsi_host/hostX/config doesn't show any information
From: Robert Jennings @ 2012-08-16 19:45 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: olaf, Linda Xie, Brian J King, linux-scsi, James E.J. Bottomley,
linuxppc-dev
In-Reply-To: <1343611985.21647.25.camel@pasglop>
On Sun, Jul 29, 2012 at 8:33 PM, Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
> n Wed, 2012-07-18 at 18:49 +0200, olaf@aepfle.de wrote:
>> From: Linda Xie <lxiep@us.ibm.com>
>>
>> Expected result:
>> It should show something like this:
>> x1521p4:~ # cat /sys/class/scsi_host/host1/config
>> PARTITIONNAME='x1521p4'
>> NWSDNAME='X1521P4'
>> HOSTNAME='X1521P4'
>> DOMAINNAME='RCHLAND.IBM.COM'
>> NAMESERVERS='9.10.244.100 9.10.244.200'
>>
>> Actual result:
>> x1521p4:~ # cat /sys/class/scsi_host/host0/config
>> x1521p4:~ #
>>
>> This patch changes the size of the buffer used for transfering config
>> data to 4K. It was tested against 2.6.19-rc2 tree.
>>
>> Reported by IBM during SLES11 beta testing:
>
> So this patch just seems to blindly replace all occurrences of PAGE_SIZE
> with HOST_PAGE_SIZE which is utterly wrong. Only one of those needs to
> be changed, the one passed to ibmvscsi_do_host_config() which is what's
> visible to the server, all the rest is just sysfs attributes and should
> remain as-is.
>
> Additionally (not even mentioning that there is no explanation as to
> what the real problem is anywhere in the changeset) I don't like the
> fix. The root of the problem is that the MAD header has a 16-bit length
> field, so writing 0x10000 (64K PAGE_SIZE) into it doesn't quite work.
>
> So in addition to a better comment, I would suggest a fix more like
> this:
>
> scsi/ibmvscsi: Fix host config length field overflow
>
> The length field in the host config packet is only 16-bit long, so
> passing it 0x10000 (64K which is our standard PAGE_SIZE) doesn't
> work and result in an empty config from the server.
>
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> CC: <stable@vger.kernel.org>
Acked-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Tested with an IBM i host and confirmed the fix.
> ---
>
> diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
> index 3a6c474..337e8b3 100644
> --- a/drivers/scsi/ibmvscsi/ibmvscsi.c
> +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
> @@ -1541,6 +1541,9 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
>
> host_config = &evt_struct->iu.mad.host_config;
>
> + /* The transport length field is only 16-bit */
> + length = min(0xffff, length);
> +
> /* Set up a lun reset SRP command */
> memset(host_config, 0x00, sizeof(*host_config));
> host_config->common.type = VIOSRP_HOST_CONFIG_TYPE;
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: therm_pm72 units, interface
From: Benjamin Herrenschmidt @ 2012-08-16 20:51 UTC (permalink / raw)
To: Jan Engelhardt; +Cc: linuxppc-dev
In-Reply-To: <alpine.LNX.2.01.1208161718210.8111@frira.zrqbmnf.qr>
> If you have more things to print/offer via sysfs, I'm all for it.
>
> The XsG5 really has (by looking into the casing): 1 PCI Fan,
> 6 center fans, 1 PSU intake and 1 PSU outblow fan (this last one
> seems rather slow-turning, but maybe that's normal).
> It is not quite clear which is which in the sysfs display.
The cpu intake & exhaust are the same, they are handled by groups of 3
ie, cpu0_* is the 3 fans on CPU 0, cpu1_* is the 3 fans on CPU 1.
Backside fan is supposed to blow on the U3 chip, I don't remember where
it's located, and slots fan is the PCI one afaik. The PSU's own fan
isn't under our direct control
> What I did figure out: at the PROM, fans run at what seems
> to be full speed (some 8000-9000 rpm?). Once Linux and therm_pm72
> are loaded, the fans settle down towards 4000 rpm, and if the machine
> has warmed up, that is then when it powers off. (The kernel is indeed
> 3.4. I now need to figure out how to place a new kernel on it without
> it powering off inbetween.)
You can try netbooting... OF netboot is limited to 4M sized zImages
which can be a bit tough nowadays, but modern yaboot can netboot larger
files. Another option is USB sticks.
> >> $ cd /sys/devices/temperature; grep '' *;
> >> backside_fan_pwm:32
> >> backside_temperature:54.000
> >> cpu0_current:34.423
> >> cpu0_exhaust_fan_rpm:5340
> >> cpu0_intake_fan_rpm:5340
> >> cpu0_temperature:72.889
> >> cpu0_voltage:1.252
> >> cpu1_current:34.179
> >> cpu1_exhaust_fan_rpm:4584
> >> cpu1_intake_fan_rpm:4584
> >> cpu1_temperature:68.526
> >> cpu1_voltage:1.259
> >> dimms_temperature:53.000
> >> grep: driver: Er en filkatalog
> >> modalias:platform:temperature
> >> grep: power: Er en filkatalog
> >> slots_fan_pwm:20
> >> slots_temperature:38.500
> >> grep: subsystem: Er en filkatalog
> >> uevent:DRIVER=temperature
> >> uevent:OF_NAME=fan
> >> uevent:OF_FULLNAME=/u3@0,f8000000/i2c@f8001000/fan@15e
> >> uevent:OF_TYPE=fcu
> >> uevent:OF_COMPATIBLE_0=fcu
> >> uevent:OF_COMPATIBLE_N=1
> >> uevent:MODALIAS=of:NfanTfcuCfcu
Cheers,
Ben.
^ permalink raw reply
* Re: powerpc/perf: hw breakpoints return ENOSPC
From: Michael Neuling @ 2012-08-16 23:34 UTC (permalink / raw)
To: Peter Zijlstra
Cc: Ingo Molnar, Frederic Weisbecker, K Prasad, linux-kernel,
linuxppc-dev
In-Reply-To: <1345117498.29668.23.camel@twins>
> > > > On this second syscall, fetch_bp_busy_slots() sets slots.pinned to be 1,
> > > > despite there being no breakpoint on this CPU. This is because the call
> > > > the task_bp_pinned, checks all CPUs, rather than just the current CPU.
> > > > POWER7 only has one hardware breakpoint per CPU (ie. HBP_NUM=1), so we
> > > > return ENOSPC.
> > >
> > > I think this comes from the ptrace legacy, we register a breakpoint on
> > > all cpus because when we migrate a task it cannot fail to migrate the
> > > breakpoint.
> > >
> > > Its one of the things I hate most about the hwbp stuff as it relates to
> > > perf.
> > >
> > > Frederic knows more...
> >
> > Maybe I should wait for Frederic to respond but I'm not sure I
> > understand what you're saying.
> >
> > I can see how using ptrace hw breakpoints and perf hw breakpoints at the
> > same time could be a problem, but I'm not sure how this would stop it.
>
> ptrace uses perf for hwbp support so we're stuck with all kinds of
> stupid ptrace constraints.. or somesuch.
OK
> > Are you saying that we need to keep at least 1 slot free at all times,
> > so that we can use it for ptrace?
>
> No, I'm saying perf-hwbp is weird because of ptrace, maybe the ptrace
> weirdness shouldn't live in perf-hwpb but in the ptrace-perf glue
> however..
OK.
> > Is "perf record -e mem:0x10000000 true" ever going to be able to work on
> > POWER7 with only one hw breakpoint resource per CPU?
>
> I think it should work... but I'm fairly sure it currently doesn't
> because of how things are done. 'perf record -ie mem:0x100... true'
> might just work.
Adding -i doesn't help.
Mikey
^ permalink raw reply
* Re: powerpc/perf: hw breakpoints return ENOSPC
From: Michael Ellerman @ 2012-08-17 1:20 UTC (permalink / raw)
To: Peter Zijlstra
Cc: Michael Neuling, Frederic Weisbecker, linux-kernel, linuxppc-dev,
K Prasad, Ingo Molnar
In-Reply-To: <1345126502.29668.36.camel@twins>
On Thu, 2012-08-16 at 16:15 +0200, Peter Zijlstra wrote:
> On Fri, 2012-08-17 at 00:02 +1000, Michael Ellerman wrote:
> > You do want to guarantee that the task will always be subject to the
> > breakpoint, even if it moves cpus. So is there any way to guarantee that
> > other than reserving a breakpoint slot on every cpu ahead of time?
>
> That's not how regular perf works.. regular perf can overload hw
> resources at will and stuff is strictly per-cpu.
..
> For regular (!pinned) events, we'll RR the created events on the
> available hardware resources.
Yeah I know, but that isn't really the semantics you want for a
breakpoint. You don't want to sometimes have the breakpoint active and
sometimes not, it needs to be active at all times when the task is
running.
At the very least you want it to behave like a pinned event, ie. if it
can't be scheduled you get notified and can tell the user.
> HWBP does things completely different and reserves a slot over all CPUs
> for everything, thus stuff completely falls apart.
So it would seem :)
I guess my point was that reserving a slot on each cpu seems like a
reasonable way of guaranteeing that wherever the task goes we will be
able to install the breakpoint.
But obviously we need some way to make it play nice with perf.
cheers
^ permalink raw reply
* Re: [PATCH v3 2/2] powerpc: Uprobes port to powerpc
From: Ananth N Mavinakayanahalli @ 2012-08-17 5:13 UTC (permalink / raw)
To: Oleg Nesterov
Cc: Srikar Dronamraju, peterz, lkml, Paul Mackerras, Anton Blanchard,
Ingo Molnar, linuxppc-dev
In-Reply-To: <20120816152112.GA8874@redhat.com>
On Thu, Aug 16, 2012 at 05:21:12PM +0200, Oleg Nesterov wrote:
...
> > So, the arch agnostic code itself
> > takes care of this case...
>
> Yes. I forgot about install_breakpoint()->is_swbp_insn() check which
> returns -ENOTSUPP, somehow I thought arch_uprobe_analyze_insn() does
> this.
>
> > or am I missing something?
>
> No, it is me.
>
> > However, I see that we need a powerpc specific is_swbp_insn()
> > implementation since we will have to take care of all the trap variants.
>
> Hmm, I am not sure. is_swbp_insn(insn), as it is used in the arch agnostic
> code, should only return true if insn == UPROBE_SWBP_INSN (just in case,
> this logic needs more fixes but this is offtopic).
I think it does...
> If powerpc has another insn(s) which can trigger powerpc's do_int3()
> counterpart, they should be rejected by arch_uprobe_analyze_insn().
> I think.
The insn that gets passed to arch_uprobe_analyze_insn() is copy_insn()'s
version, which is the file copy of the instruction. We should also take
care of the in-memory copy, in case gdb had inserted a breakpoint at the
same location, right? Updating is_swbp_insn() per-arch where needed will
take care of both the cases, 'cos it gets called before
arch_analyze_uprobe_insn() too.
> > I will need to update the patches based on changes being made by Oleg
> > and Sebastien for the single-step issues.
>
> Perhaps you can do this in a separate change?
>
> We need some (simple) changes in the arch agnostic code first, they
> should not break poweppc. These changes are still under discussion.
> Once we have "__weak arch_uprobe_step*" you can reimplement these
> hooks and fix the problems with single-stepping.
OK. Agreed.
Ananth
^ permalink raw reply
* Re: [git pull] Please pull powerpc.git merge branch (updated)
From: Kumar Gala @ 2012-08-17 5:28 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <alpine.LFD.2.00.1208100806200.16855@right.am.freescale.net>
Ben,
Poke. :)
- k
On Aug 10, 2012, at 8:07 AM, Kumar Gala wrote:
> Ben,
>=20
> Two updates from last week (one dts bug fix, one minor defconfig =
update)
>=20
> - k
>=20
> The following changes since commit =
0d7614f09c1ebdbaa1599a5aba7593f147bf96ee:
>=20
> Linux 3.6-rc1 (2012-08-02 16:38:10 -0700)
>=20
> are available in the git repository at:
>=20
> git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git merge
>=20
> for you to fetch changes up to =
09a3017a585eb8567a7de15b426bb1dfb548bf0f:
>=20
> powerpc/p4080ds: dts - add usb controller version info and port0 =
(2012-08-10 07:47:02 -0500)
>=20
> ----------------------------------------------------------------
> Jia Hongtao (1):
> powerpc/fsl-pci: Only scan PCI bus if configured as a host
>=20
> Shengzhou Liu (1):
> powerpc/p4080ds: dts - add usb controller version info and port0
>=20
> Zhao Chenhui (1):
> powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for =
MPC85xxCDS
>=20
> arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 7 +++++++
> arch/powerpc/configs/mpc85xx_defconfig | 1 +
> arch/powerpc/sysdev/fsl_pci.c | 13 ++++++++-----
> 3 files changed, 16 insertions(+), 5 deletions(-)
>=20
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
^ permalink raw reply
* RE: [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document
From: Wang Dongsheng-B40534 @ 2012-08-17 7:15 UTC (permalink / raw)
To: Wood Scott-B07421
Cc: Li Yang-R58472, devicetree-discuss@lists.ozlabs.org,
paulus@samba.org, Gala Kumar-B11780,
linuxppc-dev@lists.ozlabs.org
In-Reply-To: <502AC0B0.5030801@freescale.com>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^ permalink raw reply
* Re: [PATCH v3 0/7] mv643xx.c: Add basic device tree support.
From: Arnd Bergmann @ 2012-08-17 12:13 UTC (permalink / raw)
To: Ian Molton
Cc: thomas.petazzoni, andrew, netdev, devicetree-discuss, ben.dooks,
linuxppc-dev, David Miller, linux-arm-kernel
In-Reply-To: <5028D040.60604@codethink.co.uk>
On Monday 13 August 2012, Ian Molton wrote:
> On 10/08/12 11:49, Arnd Bergmann wrote:
> > On Thursday 09 August 2012, Ian Molton wrote:
> >>> The driver
> >>> already knows all those offsets and they are always the same
> >>> for all variants of mv643xx, right?
> >> Yes, but its not clean. And no amount of refactoring is
> >> really going to make a nice driver that also fits the ancient
> >> (and badly thought out) OF bindings.
> > In what way is it badly though out, or not clean? The use of
> > underscores in the properties, and the way that the sram
> > is configured is problematic, I agree. But The way that
> > the three ports are addressed and how the PHY is found
> > seems quite clever.
>
> It forces one to load the MDIO driver first, because it maps ALL the
> registers for both itself and all the ports, and the MDIO driver has no
> way of knowing how many ethernet blocks are present (I have a device
> here with two, and another with four). Thats anywhere from 1 to 12
> ports, split across 1 to 4 address ranges, and theres a big gap in the
> address range between controllers 0,1 and 2,3. *ALL* the devices on the
> board are sharing ethernet block 0's MDIO bus. By pure luck it happens
> to work, because the blocks 2,3 have an alias of the MDIO registers from
> blocks 0,1.
>
> Having the MDIO driver map the ethernet drivers memory is a terrible
> solution, IMO. Ethernet drivers should map their own memory, and that
> introduces the n-ports-per-block problem, because their address ranges
> overlap.
>
> I think the best solution is to make each ethernet block register 3 ports.
>
> the PPC code can simply generate different fixups so that instead of
> creating 3 devices, it creates one, with three ports.
Ok.
> Can we get some consensus on the right approach here? I'm loathe to code
> this if its going to be rejected.
>
> I'd prefer the driver to be properly split so we dont have the MDIO
> driver mapping the ethernet drivers address spaces, but if thats not
> going to be merged, I'm not feeling like doing the work for nothing.
>
> If the driver is to use the overlapping-address mapped-by-the-mdio
> scheme, then so be it, but I could do with knowing.
>
> Another point against the latter scheme is that the MDIO driver could
> sensibly be used (the block is identical) on the ArmadaXP, which has 4
> ethernet blocks rather than two, yet grouped in two pairs with a
> discontiguous address range.
>
> I'd like to get this moved along as soon as possible though.
I don't object to any device driver changes, but I do want to make
sure that the bindings are sensible and can coexist with the
ones that have been used for the past 5 years.
Maybe you can move the binding for the ethernet parts out of the
marvell.txt file into the place you want to use for the new
bindings and then extend it to cover both the old and the new style.
Arnd
^ permalink raw reply
* Re: therm_pm72 units, interface
From: Jan Engelhardt @ 2012-08-17 13:51 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <1345150317.11751.38.camel@pasglop>
On Thursday 2012-08-16 22:51, Benjamin Herrenschmidt wrote:
>
>You can try netbooting... OF netboot is limited to 4M sized zImages
>which can be a bit tough nowadays, but modern yaboot can netboot larger
>files. Another option is USB sticks.
I can just exploit the fact that the machine will run for about an
hour when it has had a cooldown night.
Except that 3.5, as I already expected by scary mails read on
linux-kernel, looked dangerous to use. Here is a boot-time
hang.
---
Apple RackMac3,1 5.1.7f2 BootROM built on 12/09/04 at 10:58:45
Copyright 1994-2004 Apple Computer, Inc.
All Rights Reserved.
Welcome to Open Firmware, the system time and date is: 14:03:41 08/17/2012
To continue booting, type "mac-boot" and press return.
To shut down, type "shut-down" and press return.
ok
0 > boot load-size=97d adler32=7e30648e
parsing <CHRP-BOOT>
evaluating <BOOT-SCRIPT>
DART table allocated at: c00000007f000000
Using PowerMac machine description
Found initrd at 0xc000000002400000:0xc000000002783e10
Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x35
Mapped at 0xd000080080000000
Found a K2 mac-io controller, rev: 96, mapped at 0xd000080080050000
PowerMac motherboard: XServe G5
DART IOMMU initialized for U3 type chipset
bootconsole [udbg0] enabled
CPU maps initialized for 1 thread per core
Starting Linux PPC64 #1 SMP Wed Aug 15 21:49:59 UTC 2012 (4904750)
-----------------------------------------------------
ppc64_pft_size = 0x0
physicalMemorySize = 0x80000000
htab_address = 0xc00000007c000000
htab_hash_mask = 0x3ffff
-----------------------------------------------------
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.2-5-ppc64 (geeko@buildhost) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP Wed Aug 15 21:49:59 UTC 2012 (4904750)
[boot]0012 Setup Arch
Found U3-AGP PCI host bridge. Firmware bus number: 240->255
PCI host bridge /pci@0,f0000000 ranges:
MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
MEM 0x00000000b0000000..0x00000000bfffffff -> 0x00000000b0000000
Can't get bus-range for /ht@0,f2000000, assume bus 0
Found U3-HT PCI host bridge. Firmware bus number: 0->239
PCI host bridge /ht@0,f2000000 (primary) ranges:
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=508, gen1=507
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Zone ranges:
DMA [mem 0x00000000-0x7fffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00000000-0x7fffffff]
[boot]0015 Setup Done
PERCPU: Embedded 2 pages/cpu @c000000001700000 s85504 r0 d45568 u524288
Built 1 zonelists in Node order, mobility grouping on. Total pages: 32740
Policy zone: DMA
Kernel command line: root=/dev/disk/by-label/silvroot sysrq=511 console=ttyPZ0,57600 console=tty0
PID hash table entries: 4096 (order: -1, 32768 bytes)
freeing bootmem node 0
Memory: 2012160k/2097152k available (17152k kernel code, 84992k reserved, 1984k data, 3243k bss, 5952k init)
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:512 nr_irqs:512 16
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 2 CPUs
mpic: ISU size: 120, shift: 7, mask: 7f
mpic: Initializing for 120 sources
mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 2 CPUs
mpic: ISU size: 124, shift: 7, mask: 7f
mpic: Initializing for 124 sources
/u3@0,f8000000/mpic@f8040000: hooking up to IRQ 56
clocksource: timebase mult[1e000005] shift[24] registered
Console: colour dummy device 80x25
console [tty0] enabled, bootconsole disabled
console [ttyPZ0] enabled
allocated 524288 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 5, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 4, 1048576 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
PowerMac SMP probe found 2 cpus
KeyWest i2c @0xf8001003 irq 16 /u3@0,f8000000/i2c@f8001000
channel 0 bus <multibus>
channel 1 bus <multibus>
KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000
channel 0 bus <multibus>
PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c
channel 1 bus <multibus>
channel 2 bus <multibus>
Processor timebase sync using Pulsar i2c clock
mpic: requesting IPIs...
PPC970/FX/MP performance monitor hardware support registered
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
IBM eBus Device Driver
CPU Hotplug not supported by firmware - disabling.
PCI: Probing PCI hardware
PCI host bridge to bus 0000:f0
pci_bus 0000:f0: root bus resource [io 0x10000-0x80ffff] (bus address [0x0000-0x7fffff])
pci_bus 0000:f0: root bus resource [mem 0xf1000000-0xf1ffffff]
pci_bus 0000:f0: root bus resource [mem 0xb0000000-0xbfffffff]
IOMMU table initialized, virtual merging enabled
PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [io 0x820000-0xc1ffff] (bus address [0x0000-0x3fffff])
pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff]
pci_bus 0001:00: root bus resource [mem 0x80000000-0xafffffff]
pci_bus 0001:00: root bus resource [mem 0xc0000000-0xefffffff]
pci 0001:00:01.0: PCI bridge to [bus 06-06]
pci 0001:00:02.0: PCI bridge to [bus 07-07]
pci 0001:00:03.0: PCI bridge to [bus 01-01]
pci 0001:00:04.0: PCI bridge to [bus 02-02]
pci 0001:00:05.0: PCI bridge to [bus 03-03]
pci 0001:00:06.0: PCI bridge to [bus 04-04]
pci 0001:00:07.0: PCI bridge to [bus 05-05]
PCI: Cannot allocate resource region 1 of device 0001:06:03.0, will remap
pci 0001:00:01.0: BAR 13: assigned [io 0x821000-0x821fff]
pci 0001:06:03.0: BAR 1: assigned [io 0x821000-0x8210ff]
pci 0001:00:01.0: PCI bridge to [bus 06-06]
pci 0001:00:01.0: bridge window [io 0x821000-0x821fff]
pci 0001:00:01.0: bridge window [mem 0x90000000-0x9fffffff]
pci 0001:00:02.0: PCI bridge to [bus 07-07]
pci 0001:00:02.0: bridge window [mem 0xa0000000-0xa00fffff]
pci 0001:00:03.0: PCI bridge to [bus 01-01]
pci 0001:00:03.0: bridge window [mem 0x80000000-0x800fffff]
pci 0001:00:04.0: PCI bridge to [bus 02-02]
pci 0001:00:04.0: bridge window [mem 0x80100000-0x801fffff]
pci 0001:00:05.0: PCI bridge to [bus 03-03]
pci 0001:00:05.0: bridge window [mem 0x80200000-0x802fffff]
pci 0001:00:06.0: PCI bridge to [bus 04-04]
pci 0001:00:06.0: bridge window [mem 0x80300000-0x805fffff]
pci 0001:00:07.0: PCI bridge to [bus 05-05]
pci 0001:00:07.0: bridge window [mem 0x80600000-0x806fffff]
opal: Node not found
bio: create slab <bio-0> at 0
vgaarb: device added: PCI:0001:06:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0001:06:03.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource timebase
AppArmor: AppArmor Filesystem Enabled
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 1, 131072 bytes)
TCP established hash table entries: 65536 (order: 4, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 0, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
NET: Registered protocol family 1
pci 0001:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0001:00:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0001:00:02.0: MSI quirk detected; subordinate MSI disabled
pci 0001:00:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0001:02:0b.0: enabling device (0000 -> 0002)
pci 0001:02:0b.1: enabling device (0000 -> 0002)
pci 0001:02:0b.2: enabling device (0004 -> 0006)
Unpacking initramfs...
Freeing initrd memory: 3648k freed
rtas_flash: no firmware flash support
Registering G5 CPU frequency driver
Frequency method: i2c/pfunc, Voltage method: i2c/pfunc
Low: 1800 Mhz, High: 2300 Mhz, Cur: 1800 MHz
audit: initializing netlink socket (disabled)
type=2000 audit(1345212264.179:1): initialized
HugeTLB registered 16 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
msgmni has been set to 3936
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
rpadlpar_io_init: partition not DLPAR capable
Using unsupported 640x480 ATY,Rage128y at 98000000, depth=8, pitch=640
Console: switching to colour frame buffer device 80x30
fb0: Open Firmware frame buffer device on /ht@0,f2000000/pci@1/ATY,Rage128y@3
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
Registering IBM pSeries RNG driver
MacIO PCI driver attached to K2 chipset
0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
Uniform Multi-Platform E-IDE driver
ide-pmac 0001:03:0d.0: enabling device (0014 -> 0016)
adb: starting probe task...
adb: finished probe task...
ide-pmac: Found Apple K2 ATA-6 controller (PCI), bus ID 3, irq 39
hda: MATSHITACD-RW CW-8124, ATAPI CD/DVD-ROM drive
hda: UDMA/33 mode selected
ide0 at 0xd0000800825e6000-0xd0000800825e6070,0xd0000800825e6160 on irq 39
mousedev: PS/2 mouse device common for all mice
PowerMac i2c bus pmu 2 registered
PowerMac i2c bus pmu 1 registered
PowerMac i2c bus mac-io 0 registered
PowerMac i2c bus u3 1 registered
i2c i2c-3: i2c-powermac: modalias failure on /u3@0,f8000000/i2c@f8001000/cereal@1c0
PowerMac i2c bus u3 0 registered
EDAC MC: Ver: 2.1.0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
Key type dns_resolver registered
PM: Registered nosave memory: 000000007f000000 - 0000000080000000
registered taskstats version 1
input: PMU as /devices/virtual/input/input0
/home/abuild/rpmbuild/BUILD/kernel-ppc64-3.5.2/linux-3.5/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 5952k freed
SCSI subsystem initialized
scsi0 : sata_svw
scsi1 : sata_svw
scsi2 : sata_svw
scsi3 : sata_svw
ata1: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600000 irq 17
ata2: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600100 irq 17
ata3: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600200 irq 17
ata4: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600300 irq 17
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: HITACHI HDS7216SBSUN160G 0825QPY8WM, P22OAB8A, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA HITACHI HDS7216S P22O PQ: 0 ANSI: 5
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
rdac: device handler registered
alua: device handler registered
hp_sw: device handler registered
emc: device handler registered
udevd[86]: starting version 182
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
BUG: soft lockup - CPU#0 stuck for 22s! [udevd:88]
BUG: soft lockup - CPU#1 stuck for 22s! [udevd:93]
NIP: c00000000000fc84 LR: c00000000000fc84 CTR: c000000000163c20
REGS: c0000000797af830 TRAP: 0901 Not tainted (3.5.2-5-ppc64)
MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 24222484 XER: 20000000
SOFTE: 1
TASK = c000000079500260[93] 'udevd' THREAD: c0000000797ac000 CPU: 1
GPR00: c00000000000fc48 c0000000797afab0 c00000000121ee98 0000000000000800
GPR04: 0000000000000001 d000000001382a58 00000000aadf3316 0000000000000000
GPR08: 00000000aadf331b 0000000000000000 0000000080000001 0000000000000000
GPR12: 0000000024222482 c00000000fe20780
NIP [c00000000000fc84] .arch_local_irq_restore+0x74/0x90
LR [c00000000000fc84] .arch_local_irq_restore+0x74/0x90
Call Trace:
[c0000000797afab0] [c00000000000fc48] .arch_local_irq_restore+0x38/0x90 (unreliable)
[c0000000797afb20] [c0000000007901b4] ._raw_spin_unlock_irqrestore+0x34/0x80
[c0000000797afb90] [c0000000000d8bdc] .lowest_in_progress+0xbc/0xe0
[c0000000797afc20] [c0000000000d8c58] .async_synchronize_cookie_domain+0x58/0x170
[c0000000797afd00] [c0000000000d8dc8] .async_synchronize_full+0x38/0x70
[c0000000797afd90] [c00000000011d4b0] .SyS_init_module+0xf0/0x240
[c0000000797afe30] [c0000000000098dc] syscall_exit+0x0/0xa0
Instruction dump:
409e002c e92d0020 61298000 7d210164 38210070 e8010010 7c0803a6 4e800020
60000000 60000000 60000000 4bff3985 <60000000> 4bffffdc e92d0020 7d210164
Modules linked in: sd_mod crc_t10dif usbcore usb_common scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh sata_svw libata scsi_mod
Modules linked in: sd_mod crc_t10dif usbcore usb_common scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh sata_svw libata scsi_mod
NIP: c00000000079095c LR: c0000000007909a0 CTR: c000000000163c20
REGS: c000000079abb880 TRAP: 0901 Not tainted (3.5.2-5-ppc64)
MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 24224484 XER: 20000000
SOFTE: 1
TASK = c000000079b45410[88] 'udevd' THREAD: c000000079ab8000 CPU: 0
GPR00: c0000000000d8b4c c000000079abbb00 c00000000121ee98 0000000000000001
GPR04: c0000000010cab88 d00000000169ab38 00000000aad506ec 0000000000000000
GPR08: 00000000aad506f4 0000000080000001 0000000000000000 0000000000000000
GPR12: 0000000024222482 c00000000fe20000
NIP [c00000000079095c] ._raw_spin_lock_irqsave+0x9c/0x110
LR [c0000000007909a0] ._raw_spin_lock_irqsave+0xe0/0x110
Call Trace:
[c000000079abbb00] [c000000079abbb90] 0xc000000079abbb90 (unreliable)
[c000000079abbb90] [c0000000000d8b4c] .lowest_in_progress+0x2c/0xe0
[c000000079abbc20] [c0000000000d8c58] .async_synchronize_cookie_domain+0x58/0x170
[c000000079abbd00] [c0000000000d8dc8] .async_synchronize_full+0x38/0x70
[c000000079abbd90] [c00000000011d4b0] .SyS_init_module+0xf0/0x240
[c000000079abbe30] [c0000000000098dc] syscall_exit+0x0/0xa0
Instruction dump:
81810008 eb81ffe0 eba1ffe8 7c0803a6 ebe1fff8 7d908120 4e800020 8b8d022a
4092004c 38600000 4b87f2bd 60000000 <7c210b78> e92d0000 e9290008 792a7fe1
INFO: rcu_sched self-detected stall on CPU { 1} (t=6000 jiffies)
Call Trace:
[c000000079abb180] [c000000000014d84] .show_stack+0x74/0x1b0 (unreliable)
[c000000079abb230] [c00000000015da0c] .__rcu_pending+0x1fc/0x570
[c000000079abb2f0] [c00000000015ddc0] .rcu_pending+0x40/0xc0
[c000000079abb380] [c00000000015efe8] .rcu_check_callbacks+0x88/0x200
[c000000079abb420] [c0000000000b67f4] .update_process_times+0x44/0xa0
[c000000079abb4b0] [c00000000010e70c] .tick_sched_timer+0x7c/0x100
[c000000079abb550] [c0000000000d3a04] .__run_hrtimer+0xb4/0x2b0
[c000000079abb600] [c0000000000d4b28] .hrtimer_interrupt+0x138/0x3c0
[c000000079abb710] [c00000000001cbc0] .timer_interrupt+0x120/0x2f0
[c000000079abb7c0] [c000000000003cd8] decrementer_common+0x158/0x180
--- Exception: 901 at .arch_local_irq_restore+0x74/0x90
LR = .arch_local_irq_restore+0x74/0x90
[c000000079abbab0] [c00000000000fc48] .arch_local_irq_restore+0x38/0x90 (unreliable)
[c000000079abbb20] [c0000000007901b4] ._raw_spin_unlock_irqrestore+0x34/0x80
[c000000079abbb90] [c0000000000d8bdc] .lowest_in_progress+0xbc/0xe0
[c000000079abbc20] [c0000000000d8c58] .async_synchronize_cookie_domain+0x58/0x170
[c000000079abbd00] [c0000000000d8dc8] .async_synchronize_full+0x38/0x70
[c000000079abbd90] [c00000000011d4b0] .SyS_init_module+0xf0/0x240
[c000000079abbe30] [c0000000000098dc] syscall_exit+0x0/0xa0
INFO: rcu_sched self-detected stall on CPU { 0} (t=6000 jiffies)
Call Trace:
[c0000000797af180] [c000000000014d84] .show_stack+0x74/0x1b0 (unreliable)
[c0000000797af230] [c00000000015da0c] .__rcu_pending+0x1fc/0x570
[c0000000797af2f0] [c00000000015ddc0] .rcu_pending+0x40/0xc0
[c0000000797af380] [c00000000015efe8] .rcu_check_callbacks+0x88/0x200
[c0000000797af420] [c0000000000b67f4] .update_process_times+0x44/0xa0
[c0000000797af4b0] [c00000000010e70c] .tick_sched_timer+0x7c/0x100
[c0000000797af550] [c0000000000d3a04] .__run_hrtimer+0xb4/0x2b0
[c0000000797af600] [c0000000000d4b28] .hrtimer_interrupt+0x138/0x3c0
[c0000000797af710] [c00000000001cbc0] .timer_interrupt+0x120/0x2f0
[c0000000797af7c0] [c000000000003cd8] decrementer_common+0x158/0x180
--- Exception: 901 at .arch_local_irq_restore+0x74/0x90
LR = .arch_local_irq_restore+0x74/0x90
[c0000000797afab0] [c00000000000fc48] .arch_local_irq_restore+0x38/0x90 (unreliable)
[c0000000797afb20] [c0000000007901b4] ._raw_spin_unlock_irqrestore+0x34/0x80
[c0000000797afb90] [c0000000000d8bdc] .lowest_in_progress+0xbc/0xe0
[c0000000797afc20] [c0000000000d8c58] .async_synchronize_cookie_domain+0x58/0x170
[c0000000797afd00] [c0000000000d8dc8] .async_synchronize_full+0x38/0x70
[c0000000797afd90] [c00000000011d4b0] .SyS_init_module+0xf0/0x240
[c0000000797afe30] [c0000000000098dc] syscall_exit+0x0/0xa0
^ permalink raw reply
* Re: [PATCH] powerpc:Update Integrated Flash controller device tree bindings
From: Kumar Gala @ 2012-08-17 14:07 UTC (permalink / raw)
To: Prabhakar Kushwaha; +Cc: linuxppc-dev
In-Reply-To: <1345043632-28535-1-git-send-email-prabhakar@freescale.com>
On Aug 15, 2012, at 10:13 AM, Prabhakar Kushwaha wrote:
> Freescale's Integrated Flash controller (IFC) may have one or two
> interrupts. In case of single interrupt line, it will cover all IFC
> interrupts.
>
> Update this information in IFC device tree bindings
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> ---
> Base upon git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git
> Branch next
>
> .../devicetree/bindings/powerpc/fsl/ifc.txt | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
applied to next
- k
^ permalink raw reply
* Re: [PATCH] powerpc/mpc85xx:Add new ext fields to Integrated FLash Controller
From: Kumar Gala @ 2012-08-17 14:07 UTC (permalink / raw)
To: Prabhakar Kushwaha; +Cc: linuxppc-dev, York Sun
In-Reply-To: <1345089502-23979-1-git-send-email-prabhakar@freescale.com>
On Aug 15, 2012, at 10:58 PM, Prabhakar Kushwaha wrote:
> Freescale's Integrated Flash controller(IFC) v1.1.0 supports 40 bit
> address bus width.
> In case more than 32 bit address is used, the EXT registers should be set.
>
> Add support of ext registers.
>
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> Signed-off-by: York Sun <yorksun@freescale.com>
> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> ---
> Base upon git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git
> Branch next
>
> arch/powerpc/include/asm/fsl_ifc.h | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
applied to next
- k
^ permalink raw reply
* Re: [v2 PATCH 1/1] booke/wdt: some ioctls do not return values properly
From: Kumar Gala @ 2012-08-17 14:07 UTC (permalink / raw)
To: Tiejun Chen; +Cc: linuxppc-dev, B04825, linux-watchdog
In-Reply-To: <1344304780-13555-1-git-send-email-tiejun.chen@windriver.com>
On Aug 6, 2012, at 8:59 PM, Tiejun Chen wrote:
> Fix some booke wdt ioctls return value error.
>
> Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
> ---
> drivers/watchdog/booke_wdt.c | 7 +++----
> 1 files changed, 3 insertions(+), 4 deletions(-)
applied to merge
- k
^ permalink raw reply
* Re: therm_pm72 units, interface
From: Jan Engelhardt @ 2012-08-17 14:23 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <1345150317.11751.38.camel@pasglop>
On Thursday 2012-08-16 22:51, Benjamin Herrenschmidt wrote:
>
>> What I did figure out: at the PROM, fans run at what seems
>> to be full speed (some 8000-9000 rpm?). Once Linux and therm_pm72
>> are loaded, the fans settle down towards 4000 rpm, and if the machine
>> has warmed up, that is then when it powers off. (The kernel is indeed
>> 3.4. I now need to figure out how to place a new kernel on it without
>> it powering off inbetween.)
>
>You can try netbooting... OF netboot is limited to 4M sized zImages
>which can be a bit tough nowadays, but modern yaboot can netboot larger
>files. Another option is USB sticks.
It turns out the pm72/windfarm drivers are not the ones at fault. As
soon as the linux kernel (seen with versions v3.0, v3.1, v3.4 and
v3.5.2) is started by yaboot, the machine is prone to die in a
poweroff. Using rdinit=/bin/sh (boot parameter), I can make it into
the sh (no windfarm driver loaded - fans at full speed), but going
further is a luck game. Is there some hidden watchdog in the G5 that
Linux activates?
[.config]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 3.5.2 Kernel Configuration
#
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_PPC_BOOK3S_64=y
# CONFIG_PPC_BOOK3E_64 is not set
CONFIG_GENERIC_CPU=y
# CONFIG_CELL_CPU is not set
# CONFIG_POWER4_CPU is not set
# CONFIG_POWER5_CPU is not set
# CONFIG_POWER6_CPU is not set
# CONFIG_POWER7_CPU is not set
CONFIG_PPC_BOOK3S=y
CONFIG_POWER3=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
# CONFIG_PPC_ICSWX is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=1024
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_EPAPR_BOOT is not set
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
CONFIG_PPC_OF_PLATFORM_PCI=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_SUSE_KERNEL=y
# CONFIG_ENTERPRISE_SUPPORT is not set
CONFIG_SPLIT_PACKAGE=y
# CONFIG_KERNEL_DESKTOP is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-ppc64"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_IRQ_EDGE_EOI_HANDLER=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y
CONFIG_PPC_XICS=y
CONFIG_PPC_ICP_NATIVE=y
CONFIG_PPC_ICP_HV=y
CONFIG_PPC_ICS_RTAS=y
# CONFIG_GE_FPGA is not set
#
# Platform support
#
CONFIG_PPC_POWERNV=y
CONFIG_PPC_POWERNV_RTAS=y
CONFIG_PPC_PSERIES=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
CONFIG_PSERIES_MSI=y
CONFIG_PSERIES_ENERGY=m
CONFIG_SCANLOG=m
CONFIG_IO_EVENT_IRQ=y
CONFIG_LPARCFG=y
CONFIG_PPC_SMLPAR=y
CONFIG_CMM=m
CONFIG_DTL=y
CONFIG_PSERIES_IDLE=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
# CONFIG_PPC_PASEMI is not set
CONFIG_PPC_PS3=y
#
# PS3 Platform Options
#
CONFIG_PS3_ADVANCED=y
CONFIG_PS3_HTAB_SIZE=20
# CONFIG_PS3_DYNAMIC_DMA is not set
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
CONFIG_PS3_SYS_MANAGER=y
# CONFIG_PS3_REPOSITORY_WRITE is not set
CONFIG_PS3_STORAGE=m
CONFIG_PS3_DISK=m
CONFIG_PS3_ROM=m
CONFIG_PS3_FLASH=m
CONFIG_PS3_VRAM=m
CONFIG_PS3_LPM=m
# CONFIG_PS3GELIC_UDBG is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_COMMON=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
# CONFIG_PPC_CELLEB is not set
CONFIG_PPC_CELL_QPACE=y
CONFIG_AXON_MSI=y
#
# Cell Broadband Engine options
#
CONFIG_SPU_FS=m
CONFIG_SPU_BASE=y
CONFIG_CBE_RAS=y
CONFIG_PPC_IBM_CELL_RESETBUTTON=y
CONFIG_PPC_IBM_CELL_POWERBUTTON=m
CONFIG_CBE_THERM=m
CONFIG_CBE_CPUFREQ=m
CONFIG_CBE_CPUFREQ_PMI_ENABLE=y
CONFIG_CBE_CPUFREQ_PMI=m
CONFIG_PPC_PMI=m
CONFIG_CBE_CPUFREQ_SPU_GOVERNOR=m
CONFIG_OPROFILE_CELL=y
# CONFIG_PQ2ADS is not set
# CONFIG_PPC_WSP is not set
CONFIG_KVM_GUEST=y
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_SMP_MUXED_IPI=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_PPC_EPAPR_HV_PIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_MPIC_MSGR=y
CONFIG_PPC_I8259=y
CONFIG_U3_DART=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_PPC_RTAS_DAEMON=y
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
CONFIG_MMIO_NVRAM=y
CONFIG_MPIC_U3_HT_IRQS=y
CONFIG_IBMVIO=y
CONFIG_IBMEBUS=y
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
CONFIG_PPC_P7_NAP=y
CONFIG_PPC_INDIRECT_IO=y
CONFIG_PPC_INDIRECT_PIO=y
CONFIG_PPC_INDIRECT_MMIO=y
CONFIG_PPC_IO_WORKAROUNDS=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# PowerPC CPU frequency scaling drivers
#
# CONFIG_CPU_FREQ_MAPLE is not set
#
# CPU Frequency drivers
#
CONFIG_CPU_FREQ_PMAC64=y
#
# CPUIdle driver
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_AXON_RAM=m
# CONFIG_FSL_ULI1575 is not set
CONFIG_SIMPLE_GPIO=y
#
# Kernel options
#
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_HELPER=y
# CONFIG_SWIOTLB is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_FA_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=8
CONFIG_MAX_ACTIVE_REGIONS=256
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_PPC_HAS_HASH_64K=y
# CONFIG_PPC_4K_PAGES is not set
CONFIG_PPC_64K_PAGES=y
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_PPC_SUBPAGE_PROT=y
CONFIG_SCHED_SMT=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=y
CONFIG_HOTPLUG_PCI_RPA_DLPAR=y
# CONFIG_HAS_RAPIDIO is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DMA_ENGINE=y
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_RAPIDIO_TSI500=y
CONFIG_NONSTATIC_KERNEL=y
CONFIG_RELOCATABLE=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CONNTRACK_SLP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_PHONET=m
CONFIG_IEEE802154=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_OPENVSWITCH=m
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NETPRIO_CGROUP=m
CONFIG_BQL=y
CONFIG_BPF_JIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_MCP251X=m
CONFIG_PCH_CAN=m
CONFIG_CAN_MSCAN=m
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SJA1000_OF_PLATFORM=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_CC770=m
CONFIG_CAN_CC770_ISA=m
CONFIG_CAN_CC770_PLATFORM=m
#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=m
# CONFIG_CAN_ESD_USB2 is not set
CONFIG_CAN_PEAK_USB=m
CONFIG_CAN_SOFTING=m
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_ATH3K=m
CONFIG_BT_WILINK=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
CONFIG_CAIF_USB=m
CONFIG_CEPH_LIB=m
CONFIG_CEPH_LIB_PRETTYDEBUG=y
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_NCI=m
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y
CONFIG_NFC_LLCP=y
#
# Near Field Communication (NFC) devices
#
CONFIG_PN544_NFC=m
CONFIG_PN544_HCI_NFC=m
CONFIG_NFC_PN533=m
CONFIG_NFC_WILINK=m
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=m
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
CONFIG_MTD_TESTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_OF_PARTS=m
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
CONFIG_MTD_SWAP=m
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SST25L=m
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
# CONFIG_MTD_UBI is not set
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
CONFIG_PROC_DEVICETREE=y
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_MTD=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_NVME=m
CONFIG_BLK_DEV_OSD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=123456
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=m
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
CONFIG_PHANTOM=m
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_TI_DAC7512=m
CONFIG_BMP085=y
CONFIG_BMP085_I2C=m
CONFIG_BMP085_SPI=m
CONFIG_PCH_PHUB=m
CONFIG_USB_SWITCH_FSA9480=m
CONFIG_C2PORT=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_93XX46=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
CONFIG_SENSORS_LIS3_SPI=m
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
CONFIG_BLK_DEV_IT8172=m
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_UFSHCD=m
# CONFIG_SCSI_HPTIOP is not set
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_IBMVSCSI=m
CONFIG_SCSI_IBMVSCSIS=m
CONFIG_SCSI_IBMVFC=m
CONFIG_SCSI_IBMVFC_TRACE=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=m
CONFIG_ATA_NONSTANDARD=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
CONFIG_SATA_SVW=m
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=m
CONFIG_PATA_ARASAN_CF=m
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_ATP867X=m
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
CONFIG_PATA_CS5536=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_IT821X=m
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MACIO=m
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=m
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=m
# CONFIG_PATA_SIS is not set
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_RZ1000=m
#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
# CONFIG_DM_DEBUG_SPACE_MAPS is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_RAID=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_REGION_HASH_LOG=m
CONFIG_DM_RAID45=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_SBP_TARGET=m
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_LED=y
CONFIG_ADB_PMU_LED_IDE=y
CONFIG_PMAC_SMU=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_THERM_PM72 is not set
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM72=m
CONFIG_WINDFARM_RM31=m
CONFIG_WINDFARM_PM91=y
CONFIG_WINDFARM_PM112=y
CONFIG_WINDFARM_PM121=y
CONFIG_PMAC_RACKMETER=m
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_MII=y
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_RIONET=m
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=m
CONFIG_CAIF_SPI_SLAVE=m
# CONFIG_CAIF_SPI_SYNC is not set
CONFIG_CAIF_HSI=m
#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=y
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_BNX2X=m
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_CALXEDA_XGMAC=m
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DE600=m
CONFIG_DE620=m
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_IBM=y
CONFIG_IBMVETH=m
CONFIG_IBM_EMAC=m
CONFIG_IBM_EMAC_RXB=128
CONFIG_IBM_EMAC_TXB=64
CONFIG_IBM_EMAC_POLL_WEIGHT=32
CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
# CONFIG_IBM_EMAC_DEBUG is not set
CONFIG_IBM_EMAC_ZMII=y
CONFIG_IBM_EMAC_RGMII=y
CONFIG_IBM_EMAC_TAH=y
CONFIG_IBM_EMAC_EMAC4=y
# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
CONFIG_EHEA=m
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_PTP=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
# CONFIG_IXGBE_PTP is not set
CONFIG_IXGBEVF=m
CONFIG_NET_VENDOR_I825XX=y
CONFIG_ZNET=m
CONFIG_IP1000=m
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_SKGE is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=m
CONFIG_PCH_PTP=y
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_SEEQ8005=m
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
CONFIG_SIS190=m
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
CONFIG_STMMAC_PLATFORM=y
CONFIG_STMMAC_PCI=y
# CONFIG_STMMAC_DEBUG_FS is not set
# CONFIG_STMMAC_DA is not set
CONFIG_STMMAC_RING=y
# CONFIG_STMMAC_CHAINED is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=m
CONFIG_NET_VENDOR_TOSHIBA=y
CONFIG_GELIC_NET=m
CONFIG_GELIC_WIRELESS=y
CONFIG_SPIDER_NET=m
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_LL_TEMAC=m
# CONFIG_FDDI is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_GPIO=m
CONFIG_MDIO_BUS_MUX=m
CONFIG_MDIO_BUS_MUX_GPIO=m
CONFIG_MICREL_KS8995MA=m
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_WLAN=y
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
CONFIG_AT76C50X_USB=m
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
CONFIG_ATH9K_RATE_CONTROL=y
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
# CONFIG_CARL9170_DEBUGFS is not set
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=m
CONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_BCMA_EXTRA=y
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_USB=y
# CONFIG_BRCMDBG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=m
CONFIG_LIBIPW_DEBUG=y
CONFIG_IWLWIFI=m
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# CONFIG_IWLWIFI_P2P is not set
# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
# CONFIG_IWLEGACY_DEBUGFS is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_APPLE_AIRPORT=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
# CONFIG_P54_SPI_DEFAULT_EEPROM is not set
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS is not set
# CONFIG_RT2X00_DEBUG is not set
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=m
CONFIG_WL_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL12XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SPI=m
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
#
# Enable MMC support to see WiMAX SDIO drivers
#
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
# CONFIG_WAN is not set
CONFIG_VMXNET3=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
# CONFIG_ISDN_CAPI_MIDDLEWARE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=m
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_OMAP4=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP_SPI=m
CONFIG_TOUCHSCREEN_DA9034=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_ILI210X=m
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_ELOUSB=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_PCAP=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_AD714X_SPI=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_MPU3050=m
CONFIG_INPUT_GP2A=m
CONFIG_INPUT_GPIO_TILT_POLLED=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_PCAP=m
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_ADXL34X_SPI=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_XILINX_XPS_PS2=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=m
CONFIG_N_GSM=m
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
CONFIG_PPC_EPAPR_HV_BYTECHAN=m
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_DW=m
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX3107=m
# CONFIG_SERIAL_MRST_MAX3110 is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_PMACZILOG=y
# CONFIG_SERIAL_PMACZILOG_TTYS is not set
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_SERIAL_ICOM=m
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_OF_PLATFORM=m
CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL=m
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_IFX6X60=m
CONFIG_SERIAL_PCH_UART=m
CONFIG_SERIAL_XILINX_PS_UART=m
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_CONSOLE=y
# CONFIG_HVC_OLD_HVSI is not set
CONFIG_HVC_OPAL=y
CONFIG_HVC_RTAS=y
# CONFIG_HVC_UDBG is not set
CONFIG_HVCS=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IBM_BSR=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_PSERIES=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=4096
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
CONFIG_TCG_ATMEL=m
CONFIG_DEVPORT=y
CONFIG_CRASHER=m
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PCI=m
CONFIG_I2C_EG20T=m
CONFIG_I2C_GPIO=m
# CONFIG_I2C_INTEL_MID is not set
CONFIG_I2C_MPC=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=m
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_OC_TINY=m
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_TOPCLIFF_PCH=m
CONFIG_SPI_XILINX=m
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_PCI=m
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
#
# HSI clients
#
CONFIG_HSI_CHAR=m
#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=m
CONFIG_GPIO_MAX730X=m
#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_VX855=m
#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_ADP5520=m
CONFIG_GPIO_ADP5588=m
#
# PCI GPIO expanders:
#
CONFIG_GPIO_ML_IOH=m
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MCP23S08=m
CONFIG_GPIO_MC33880=m
CONFIG_GPIO_74X164=m
#
# AC97 GPIO expanders:
#
CONFIG_GPIO_UCB1400=y
#
# MODULbus GPIO expanders:
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2431=m
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_SBS=m
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
CONFIG_BATTERY_DA9030=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_SMB347=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ALIM7101_WDT=m
# CONFIG_I6300ESB_WDT is not set
CONFIG_WATCHDOG_RTAS=m
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
CONFIG_HTC_PASIC3=m
# CONFIG_HTC_I2CPLD is not set
CONFIG_UCB1400_CORE=m
CONFIG_MFD_LM3533=m
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=m
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_S5M_CORE is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
CONFIG_EZX_PCAP=y
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=m
CONFIG_LPC_ICH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_VX855=m
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_RC_CORE=m
CONFIG_LIRC=m
CONFIG_RC_MAP=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_RC5_SZ_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DMA_CONTIG=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
#
# Camera sensor devices
#
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_MT9V011=m
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
# Miscelaneous helper chips
#
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_VIVI=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_VIDEO_AU0828=m
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_VIDEO_TLG2300=m
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_USB_SN9C102=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_V4L_PCI_DRIVERS=y
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m
CONFIG_V4L_ISA_PARPORT_DRIVERS=y
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_VIDEO_TIMBERDALE=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_IMX074=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9M111=m
CONFIG_SOC_CAMERA_MT9T031=m
CONFIG_SOC_CAMERA_MT9T112=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_SOC_CAMERA_RJ54N1=m
CONFIG_SOC_CAMERA_TW9910=m
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_SOC_CAMERA_OV2640=m
CONFIG_SOC_CAMERA_OV5642=m
CONFIG_SOC_CAMERA_OV6650=m
CONFIG_SOC_CAMERA_OV772X=m
CONFIG_SOC_CAMERA_OV9640=m
CONFIG_SOC_CAMERA_OV9740=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_KEENE=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m
#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_RADIO_WL128X=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_IT913X=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_SIANO_MDTV=m
#
# Siano module components
#
CONFIG_SMS_USB_DRV=m
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported SDMC DM1105 Adapters
#
CONFIG_DVB_DM1105=m
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
#
# Supported Earthsoft PT1 Adapters
#
CONFIG_DVB_PT1=m
#
# Supported Mantis Adapters
#
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
#
# Supported nGene Adapters
#
CONFIG_DVB_NGENE=m
#
# Supported ddbridge ('Octopus') Adapters
#
CONFIG_DVB_DDBRIDGE=m
#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_RTL2830=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_IT913X_FE=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_UNINORTH=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=m
CONFIG_DRM_USB=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_NOUVEAU_DEBUG is not set
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_STUB_POULSBO=m
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=m
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_I740=m
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=m
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_PS3=y
CONFIG_FB_PS3_DEFAULT_SIZE_M=9
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_LIME is not set
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_BROADSHEET=m
CONFIG_FB_AUO_K190X=m
CONFIG_FB_AUO_K1900=m
CONFIG_FB_AUO_K1901=m
CONFIG_EXYNOS_VIDEO=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_S6E63M0=m
CONFIG_LCD_LD9040=m
CONFIG_LCD_AMS369FG06=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_DA903X=m
CONFIG_BACKLIGHT_ADP5520=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_LP855X=m
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_FB_LOGO_EXTRA=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Bootsplash configuration
#
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_TEA575X=m
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
CONFIG_SND_AW2=m
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
CONFIG_SND_VIRTUOSO=m
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_PPC=y
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y
CONFIG_SND_PS3=m
CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
CONFIG_SND_AOA=m
CONFIG_SND_AOA_FABRIC_LAYOUT=m
CONFIG_SND_AOA_ONYX=m
CONFIG_SND_AOA_TAS=m
CONFIG_SND_AOA_TOONIE=m
CONFIG_SND_AOA_SOUNDBUS=m
CONFIG_SND_AOA_SOUNDBUS_I2S=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_FIREWIRE_SPEAKERS=m
CONFIG_SND_ISIGHT=m
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_WIIMOTE_EXT=y
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
CONFIG_USB_OXU210HP_HCD=m
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m
CONFIG_USB_CHIPIDEA=m
# CONFIG_USB_CHIPIDEA_HOST is not set
# CONFIG_USB_CHIPIDEA_DEBUG is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
CONFIG_USB_SERIAL_ZIO=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
#
# USB Physical Layer drivers
#
CONFIG_USB_ISP1301=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA9633=m
CONFIG_LEDS_DA903X=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_ADP5520=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_OT200=m
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_QIB=m
# CONFIG_INFINIBAND_EHCA is not set
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_OCRDMA=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_CELL=m
CONFIG_EDAC_AMD8131=m
CONFIG_EDAC_AMD8111=m
CONFIG_EDAC_CPC925=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_DS3234=m
CONFIG_RTC_DRV_PCF2123=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=m
CONFIG_RTC_DRV_PS3=m
CONFIG_RTC_DRV_PCAP=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_TIMB_DMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
CONFIG_ET131X=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_HOST=m
# CONFIG_USBIP_DEBUG is not set
CONFIG_W35UND=m
# CONFIG_PRISM2_USB is not set
CONFIG_ECHO=m
CONFIG_ASUS_OLED=m
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_R8187SE=m
CONFIG_RTL8192U=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=m
CONFIG_RTS_PSTOR=m
# CONFIG_RTS_PSTOR_DEBUG is not set
CONFIG_RTS5139=m
# CONFIG_RTS5139_DEBUG is not set
CONFIG_TRANZPORT=m
CONFIG_IDE_PHISON=m
CONFIG_LINE6_USB=m
# CONFIG_LINE6_USB_DEBUG is not set
# CONFIG_LINE6_USB_DUMP_CTRL is not set
# CONFIG_LINE6_USB_DUMP_MIDI is not set
# CONFIG_LINE6_USB_DUMP_PCM is not set
# CONFIG_LINE6_USB_RAW is not set
# CONFIG_LINE6_USB_IMPULSE_RESPONSE is not set
CONFIG_USB_SERIAL_QUATECH2=m
CONFIG_VT6655=m
CONFIG_VT6656=m
CONFIG_DX_SEP=m
CONFIG_FB_SM7XX=m
CONFIG_CRYSTALHD=m
CONFIG_FB_XGI=m
CONFIG_USB_ENESTORAGE=m
CONFIG_BCM_WIMAX=m
CONFIG_FT1000=m
CONFIG_FT1000_USB=m
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_ACNTPC=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_DECPC=m
CONFIG_SPEAKUP_SYNTH_DTLK=m
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=m
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m
CONFIG_STAGING_MEDIA=y
CONFIG_DVB_AS102=m
CONFIG_DVB_CXD2099=m
CONFIG_VIDEO_DT3155=m
CONFIG_DT3155_CCIR=y
CONFIG_DT3155_STREAMING=y
CONFIG_EASYCAP=m
# CONFIG_EASYCAP_DEBUG is not set
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
CONFIG_VIDEO_GO7007_OV7640=m
CONFIG_VIDEO_GO7007_SAA7113=m
CONFIG_VIDEO_GO7007_SAA7115=m
CONFIG_VIDEO_GO7007_TW9903=m
CONFIG_VIDEO_GO7007_UDA1342=m
CONFIG_VIDEO_GO7007_SONY_TUNER=m
CONFIG_VIDEO_GO7007_TW2804=m
CONFIG_SOLO6X10=m
CONFIG_LIRC_STAGING=y
CONFIG_LIRC_BT829=m
CONFIG_LIRC_IGORPLUGUSB=m
CONFIG_LIRC_IMON=m
CONFIG_LIRC_PARALLEL=m
CONFIG_LIRC_SASEM=m
CONFIG_LIRC_SERIAL=m
CONFIG_LIRC_SERIAL_TRANSMITTER=y
CONFIG_LIRC_SIR=m
CONFIG_LIRC_TTUSBIR=m
CONFIG_LIRC_ZILOG=m
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_USB_WPAN_HCD=m
CONFIG_IPACK_BUS=m
CONFIG_BOARD_TPCI200=m
CONFIG_SERIAL_IPOCTAL=m
CONFIG_WIMAX_GDM72XX=m
# CONFIG_WIMAX_GDM72XX_QOS is not set
# CONFIG_WIMAX_GDM72XX_K_MODE is not set
CONFIG_WIMAX_GDM72XX_WIMAX2=y
CONFIG_WIMAX_GDM72XX_USB=y
CONFIG_WIMAX_GDM72XX_USB_PM=y
#
# Hardware Spinlock drivers
#
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
CONFIG_VIRT_DRIVERS=y
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=m
#
# Extcon Device Drivers
#
CONFIG_EXTCON_GPIO=m
CONFIG_MEMORY=y
# CONFIG_IIO is not set
CONFIG_VME_BUS=m
#
# VME Bridge Drivers
#
#
# VME Board Drivers
#
CONFIG_VMIVME_7805=m
#
# VME Device Drivers
#
CONFIG_VME_USER=m
CONFIG_VME_PIO2=m
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_EXT4_FS_RICHACL=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_RICHACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_NILFS2_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_LOGFS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_QNX6FS_FS=m
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=m
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
# CONFIG_EXOFS_DEBUG is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
CONFIG_CEPH_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS_ACL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m
# CONFIG_9P_FSCACHE is not set
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BCH=m
CONFIG_BCH_CONST_PARAMS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
CONFIG_CORDIC=m
CONFIG_DDR=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_LKDTM=m
CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAIL_MAKE_REQUEST is not set
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_BENCHMARK=m
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=m
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_PPC_DISABLE_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_HCALL_STATS is not set
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_STRICT_DEVMEM=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_TRUSTED_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_KEYS_COMPAT=y
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_NX=m
# CONFIG_PPC_CLOCK is not set
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_BOOK3S_HANDLER=y
CONFIG_KVM_BOOK3S_64_HANDLER=y
CONFIG_KVM_BOOK3S_PR=y
CONFIG_KVM_BOOK3S_64=m
# CONFIG_KVM_BOOK3S_64_HV is not set
CONFIG_KVM_BOOK3S_64_PR=y
# CONFIG_VHOST_NET is not set
^ permalink raw reply
* Re: [PATCH v3 2/2] powerpc: Uprobes port to powerpc
From: Oleg Nesterov @ 2012-08-17 15:00 UTC (permalink / raw)
To: Ananth N Mavinakayanahalli
Cc: Srikar Dronamraju, peterz, lkml, Paul Mackerras, Anton Blanchard,
Ingo Molnar, linuxppc-dev
In-Reply-To: <20120817051307.GA4782@in.ibm.com>
On 08/17, Ananth N Mavinakayanahalli wrote:
>
> On Thu, Aug 16, 2012 at 05:21:12PM +0200, Oleg Nesterov wrote:
>
> > Hmm, I am not sure. is_swbp_insn(insn), as it is used in the arch agnostic
> > code, should only return true if insn == UPROBE_SWBP_INSN (just in case,
> > this logic needs more fixes but this is offtopic).
>
> I think it does...
>
> > If powerpc has another insn(s) which can trigger powerpc's do_int3()
> > counterpart, they should be rejected by arch_uprobe_analyze_insn().
> > I think.
>
> The insn that gets passed to arch_uprobe_analyze_insn() is copy_insn()'s
> version, which is the file copy of the instruction.
Yes, exactly. And we are going to single-step this saved uprobe->arch.insn,
even if gdb/whatever replaces the original insn later or already replaced.
So arch_uprobe_analyze_insn() should reject the "unsafe" instructions which
we can't step over safely.
> We should also take
> care of the in-memory copy, in case gdb had inserted a breakpoint at the
> same location, right?
gdb (or even the application itself) and uprobes can obviously confuse
each other, in many ways, and we can do nothing at least currently.
Just we should ensure that the kernel can't crash/hang/etc.
> Updating is_swbp_insn() per-arch where needed will
> take care of both the cases, 'cos it gets called before
> arch_analyze_uprobe_insn() too.
For example. set_swbp()->is_swbp_insn() == T means that (for example)
uprobe_register() and uprobe_mmap() raced with each other and there is
no need for set_swbp().
However, find_active_uprobe()->is_swbp_at_addr()->is_swbp_insn() is
different, "true" confirms that this insn has triggered do_int3() and
thus we need send_sig(SIGTRAP) (just in case, this is not strictly
correct too but offtopic again).
We definitely need more changes/fixes/improvements in this area. And
perhaps powerpc requires more changes in the arch-neutral code, I dunno.
In particular, I think is_swbp_insn() should have a single caller,
is_swbp_at_addr(), and this caller should always play with current->mm.
And many, many other changes in the long term.
So far I think that, if powerpc really needs to change is_swbp_insn(),
it would be better to make another patch and discuss this change.
But of course I can't judge.
Oleg.
^ permalink raw reply
* Re: powerpc/perf: hw breakpoints return ENOSPC
From: Frederic Weisbecker @ 2012-08-17 16:15 UTC (permalink / raw)
To: Michael Neuling
Cc: Ingo Molnar, linuxppc-dev, K Prasad, linux-kernel, Peter Zijlstra
In-Reply-To: <28857.1345091034@neuling.org>
On Thu, Aug 16, 2012 at 02:23:54PM +1000, Michael Neuling wrote:
> Hi,
>
> I've been trying to get hardware breakpoints with perf to work on POWER7
> but I'm getting the following:
>
> % perf record -e mem:0x10000000 true
>
> Error: sys_perf_event_open() syscall returned with 28 (No space left on device). /bin/dmesg may provide additional information.
>
> Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?
>
> true: Terminated
>
> (FWIW adding -a and it works fine)
>
> Debugging it seems that __reserve_bp_slot() is returning ENOSPC because
> it thinks there are no free breakpoint slots on this CPU.
>
> I have a 2 CPUs, so perf userspace is doing two perf_event_open syscalls
> to add a counter to each CPU [1]. The first syscall succeeds but the
> second is failing.
>
> On this second syscall, fetch_bp_busy_slots() sets slots.pinned to be 1,
> despite there being no breakpoint on this CPU. This is because the call
> the task_bp_pinned, checks all CPUs, rather than just the current CPU.
> POWER7 only has one hardware breakpoint per CPU (ie. HBP_NUM=1), so we
> return ENOSPC.
>
> The following patch fixes this by checking the associated CPU for each
> breakpoint in task_bp_pinned. I'm not familiar with this code, so it's
> provided as a reference to the above issue.
>
> Mikey
>
> 1. not sure why it doesn't just do one syscall and specify all CPUs, but
> that's another issue. Using two syscalls should work.
This patch seems to make sense. I'll try it and run some tests.
Can I have your Signed-off-by ?
Thanks.
>
> diff --git a/kernel/events/hw_breakpoint.c b/kernel/events/hw_breakpoint.c
> index bb38c4d..e092daa 100644
> --- a/kernel/events/hw_breakpoint.c
> +++ b/kernel/events/hw_breakpoint.c
> @@ -111,14 +111,16 @@ static unsigned int max_task_bp_pinned(int cpu, enum bp_type_idx type)
> * Count the number of breakpoints of the same type and same task.
> * The given event must be not on the list.
> */
> -static int task_bp_pinned(struct perf_event *bp, enum bp_type_idx type)
> +static int task_bp_pinned(int cpu, struct perf_event *bp, enum bp_type_idx type)
> {
> struct task_struct *tsk = bp->hw.bp_target;
> struct perf_event *iter;
> int count = 0;
>
> list_for_each_entry(iter, &bp_task_head, hw.bp_list) {
> - if (iter->hw.bp_target == tsk && find_slot_idx(iter) == type)
> + if (iter->hw.bp_target == tsk &&
> + find_slot_idx(iter) == type &&
> + cpu == iter->cpu)
> count += hw_breakpoint_weight(iter);
> }
>
> @@ -141,7 +143,7 @@ fetch_bp_busy_slots(struct bp_busy_slots *slots, struct perf_event *bp,
> if (!tsk)
> slots->pinned += max_task_bp_pinned(cpu, type);
> else
> - slots->pinned += task_bp_pinned(bp, type);
> + slots->pinned += task_bp_pinned(cpu, bp, type);
> slots->flexible = per_cpu(nr_bp_flexible[type], cpu);
>
> return;
> @@ -154,7 +156,7 @@ fetch_bp_busy_slots(struct bp_busy_slots *slots, struct perf_event *bp,
> if (!tsk)
> nr += max_task_bp_pinned(cpu, type);
> else
> - nr += task_bp_pinned(bp, type);
> + nr += task_bp_pinned(cpu, bp, type);
>
> if (nr > slots->pinned)
> slots->pinned = nr;
> @@ -188,7 +190,7 @@ static void toggle_bp_task_slot(struct perf_event *bp, int cpu, bool enable,
> int old_idx = 0;
> int idx = 0;
>
> - old_count = task_bp_pinned(bp, type);
> + old_count = task_bp_pinned(cpu, bp, type);
> old_idx = old_count - 1;
> idx = old_idx + weight;
>
^ permalink raw reply
* Re: [git pull] Please pull powerpc.git merge branch (updated)
From: Kumar Gala @ 2012-08-17 17:56 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
In-Reply-To: <2F2AC95E-BCAD-4EE6-BC63-E8EF5B3584BE@kernel.crashing.org>
Ben,
Added a watchdog fix.
- k
The following changes since commit 0d7614f09c1ebdbaa1599a5aba7593f147bf96ee:
Linux 3.6-rc1 (2012-08-02 16:38:10 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git merge
for you to fetch changes up to 127c6e731106a2071ee4a6c5a34c471cd3e719f0:
booke/wdt: some ioctls do not return values properly (2012-08-17 09:03:51 -0500)
----------------------------------------------------------------
Jia Hongtao (1):
powerpc/fsl-pci: Only scan PCI bus if configured as a host
Shengzhou Liu (1):
powerpc/p4080ds: dts - add usb controller version info and port0
Tiejun Chen (1):
booke/wdt: some ioctls do not return values properly
Zhao Chenhui (1):
powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS
arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 7 +++++++
arch/powerpc/configs/mpc85xx_defconfig | 1 +
arch/powerpc/sysdev/fsl_pci.c | 13 ++++++++-----
drivers/watchdog/booke_wdt.c | 7 +++----
4 files changed, 19 insertions(+), 9 deletions(-)
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox