* Re: [PATCH -V6 18/27] mm/THP: withdraw the pgtable after pmdp related operations
From: Aneesh Kumar K.V @ 2013-04-24 9:08 UTC (permalink / raw)
To: Andrea Arcangeli; +Cc: paulus, linuxppc-dev, David Gibson
In-Reply-To: <20130422154901.GC13442@redhat.com>
Andrea Arcangeli <aarcange@redhat.com> writes:
> Hi,
>
> On Mon, Apr 22, 2013 at 03:30:52PM +0530, Aneesh Kumar K.V wrote:
>> From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
>>
>> For architectures like ppc64 we look at deposited pgtable when
>> calling pmdp_get_and_clear. So do the pgtable_trans_huge_withdraw
>> after finishing pmdp related operations.
>>
>> Cc: Andrea Arcangeli <aarcange@redhat.com>
>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
>> ---
>> mm/huge_memory.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>> index 84f3180..2a43782 100644
>> --- a/mm/huge_memory.c
>> +++ b/mm/huge_memory.c
>> @@ -1363,9 +1363,10 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
>> struct page *page;
>> pgtable_t pgtable;
>> pmd_t orig_pmd;
>> - pgtable = pgtable_trans_huge_withdraw(tlb->mm, pmd);
>> +
>> orig_pmd = pmdp_get_and_clear(tlb->mm, addr, pmd);
>> tlb_remove_pmd_tlb_entry(tlb, pmd, addr);
>> + pgtable = pgtable_trans_huge_withdraw(tlb->mm, pmd);
>> if (is_huge_zero_pmd(orig_pmd)) {
>> tlb->mm->nr_ptes--;
>> spin_unlock(&tlb->mm->page_table_lock);
>
> I think here a comment inline (not only in the commit msg) is in
> order. Otherwise it's hard to imagine others to be aware of this arch
> detail when they will read the code later. So it would be prone to
> break later without a comment.
How about ?
>From 7444a5eda33c00eea465b51c405cb830c57513b7 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Wed, 6 Mar 2013 12:50:37 +0530
Subject: [PATCH] mm/THP: withdraw the pgtable after pmdp related operations
For architectures like ppc64 we look at deposited pgtable when
calling pmdp_get_and_clear. So do the pgtable_trans_huge_withdraw
after finishing pmdp related operations.
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
---
mm/huge_memory.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 84f3180..21c5ebd 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1363,9 +1363,15 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
struct page *page;
pgtable_t pgtable;
pmd_t orig_pmd;
- pgtable = pgtable_trans_huge_withdraw(tlb->mm, pmd);
+ /*
+ * For architectures like ppc64 we look at deposited pgtable
+ * when calling pmdp_get_and_clear. So do the
+ * pgtable_trans_huge_withdraw after finishing pmdp related
+ * operations.
+ */
orig_pmd = pmdp_get_and_clear(tlb->mm, addr, pmd);
tlb_remove_pmd_tlb_entry(tlb, pmd, addr);
+ pgtable = pgtable_trans_huge_withdraw(tlb->mm, pmd);
if (is_huge_zero_pmd(orig_pmd)) {
tlb->mm->nr_ptes--;
spin_unlock(&tlb->mm->page_table_lock);
--
1.7.10
^ permalink raw reply related
* [PATCH 3/7] powerpc/powernv: Add option CONFIG_POWERNV_MSI
From: Gavin Shan @ 2013-04-24 9:37 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Gavin Shan
In-Reply-To: <1366796259-29412-1-git-send-email-shangw@linux.vnet.ibm.com>
As Michael Ellerman suggested, to add CONFIG_POWERNV_MSI for PowerNV
platform. That's similar to CONFIG_PSERIES_MSI for pSeries platform.
For now, we don't make it dependent on CONFIG_EEH since it's not ready
to enable that yet.
Apart from that, we also enable CONFIG_PPC_MSI_BITMAP on selecting
CONFIG_POWERNV_MSI.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/Kconfig | 5 +++++
arch/powerpc/sysdev/Kconfig | 1 +
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index 74fea5c..d3e840d 100644
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -8,6 +8,11 @@ config PPC_POWERNV
select PPC_PCI_CHOICE if EMBEDDED
default y
+config POWERNV_MSI
+ bool "Support PCI MSI on PowerNV platform"
+ depends on PCI_MSI
+ default y
+
config PPC_POWERNV_RTAS
depends on PPC_POWERNV
bool "Support for RTAS based PowerNV platforms such as BML"
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index a84fecf..ab4cb54 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -19,6 +19,7 @@ config PPC_MSI_BITMAP
default y if MPIC
default y if FSL_PCI
default y if PPC4xx_MSI
+ default y if POWERNV_MSI
source "arch/powerpc/sysdev/xics/Kconfig"
--
1.7.5.4
^ permalink raw reply related
* [PATCH 1/7] powerpc/powernv: Supports PHB3
From: Gavin Shan @ 2013-04-24 9:37 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Gavin Shan
In-Reply-To: <1366796259-29412-1-git-send-email-shangw@linux.vnet.ibm.com>
The patch intends to initialize PHB3 during system boot stage. The
flag "PNV_PHB_MODEL_PHB3" is introduced to differentiate IODA2
compatible PHB3 from other types of PHBs.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 62 +++++++++++++++--------------
arch/powerpc/platforms/powernv/pci.c | 6 ++-
arch/powerpc/platforms/powernv/pci.h | 8 ++-
3 files changed, 42 insertions(+), 34 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index a5c5f15..3d4e958 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -852,18 +852,19 @@ static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus,
return phb->ioda.pe_rmap[(bus->number << 8) | devfn];
}
-void __init pnv_pci_init_ioda1_phb(struct device_node *np)
+void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type)
{
struct pci_controller *hose;
static int primary = 1;
struct pnv_phb *phb;
unsigned long size, m32map_off, iomap_off, pemap_off;
const u64 *prop64;
+ const u32 *prop32;
u64 phb_id;
void *aux;
long rc;
- pr_info(" Initializing IODA OPAL PHB %s\n", np->full_name);
+ pr_info(" Initializing IODA%d OPAL PHB %s\n", ioda_type, np->full_name);
prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
if (!prop64) {
@@ -890,37 +891,34 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
hose->last_busno = 0xff;
hose->private_data = phb;
phb->opal_id = phb_id;
- phb->type = PNV_PHB_IODA1;
+ phb->type = ioda_type;
/* Detect specific models for error handling */
if (of_device_is_compatible(np, "ibm,p7ioc-pciex"))
phb->model = PNV_PHB_MODEL_P7IOC;
+ else if (of_device_is_compatible(np, "ibm,p8-pciex"))
+ phb->model = PNV_PHB_MODEL_PHB3;
else
phb->model = PNV_PHB_MODEL_UNKNOWN;
- /* We parse "ranges" now since we need to deduce the register base
- * from the IO base
- */
+ /* Parse 32-bit and IO ranges (if any) */
pci_process_bridge_OF_ranges(phb->hose, np, primary);
primary = 0;
- /* Magic formula from Milton */
+ /* Get registers */
phb->regs = of_iomap(np, 0);
if (phb->regs == NULL)
pr_err(" Failed to map registers !\n");
-
- /* XXX This is hack-a-thon. This needs to be changed so that:
- * - we obtain stuff like PE# etc... from device-tree
- * - we properly re-allocate M32 ourselves
- * (the OFW one isn't very good)
- */
-
/* Initialize more IODA stuff */
- phb->ioda.total_pe = 128;
+ prop32 = of_get_property(np, "ibm,opal-num-pes", NULL);
+ if (!prop32)
+ phb->ioda.total_pe = 1;
+ else
+ phb->ioda.total_pe = *prop32;
phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
- /* OFW Has already off top 64k of M32 space (MSI space) */
+ /* FW Has already off top 64k of M32 space (MSI space) */
phb->ioda.m32_size += 0x10000;
phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe;
@@ -930,7 +928,10 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe;
phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
- /* Allocate aux data & arrays */
+ /* Allocate aux data & arrays
+ *
+ * XXX TODO: Don't allocate io segmap on PHB3
+ */
size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
m32map_off = size;
size += phb->ioda.total_pe * sizeof(phb->ioda.m32_segmap[0]);
@@ -960,7 +961,7 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
hose->mem_resources[2].start = 0;
hose->mem_resources[2].end = 0;
-#if 0
+#if 0 /* We should really do that ... */
rc = opal_pci_set_phb_mem_window(opal->phb_id,
window_type,
window_num,
@@ -974,16 +975,6 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
phb->ioda.m32_size, phb->ioda.m32_segsize,
phb->ioda.io_size, phb->ioda.io_segsize);
- if (phb->regs) {
- pr_devel(" BUID = 0x%016llx\n", in_be64(phb->regs + 0x100));
- pr_devel(" PHB2_CR = 0x%016llx\n", in_be64(phb->regs + 0x160));
- pr_devel(" IO_BAR = 0x%016llx\n", in_be64(phb->regs + 0x170));
- pr_devel(" IO_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x178));
- pr_devel(" IO_SAR = 0x%016llx\n", in_be64(phb->regs + 0x180));
- pr_devel(" M32_BAR = 0x%016llx\n", in_be64(phb->regs + 0x190));
- pr_devel(" M32_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x198));
- pr_devel(" M32_SAR = 0x%016llx\n", in_be64(phb->regs + 0x1a0));
- }
phb->hose->ops = &pnv_pci_ops;
/* Setup RID -> PE mapping function */
@@ -1011,7 +1002,18 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
if (rc)
pr_warning(" OPAL Error %ld performing IODA table reset !\n", rc);
- opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
+
+ /*
+ * On IODA1 map everything to PE#0, on IODA2 we assume the IODA reset
+ * has cleared the RTT which has the same effect
+ */
+ if (ioda_type == PNV_PHB_IODA1)
+ opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
+}
+
+void pnv_pci_init_ioda2_phb(struct device_node *np)
+{
+ pnv_pci_init_ioda_phb(np, PNV_PHB_IODA2);
}
void __init pnv_pci_init_ioda_hub(struct device_node *np)
@@ -1034,6 +1036,6 @@ void __init pnv_pci_init_ioda_hub(struct device_node *np)
for_each_child_of_node(np, phbn) {
/* Look for IODA1 PHBs */
if (of_device_is_compatible(phbn, "ibm,ioda-phb"))
- pnv_pci_init_ioda1_phb(phbn);
+ pnv_pci_init_ioda_phb(phbn, PNV_PHB_IODA1);
}
}
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 42eee93..a11b5a6 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -492,7 +492,7 @@ static void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
pnv_pci_dma_fallback_setup(hose, pdev);
}
-/* Fixup wrong class code in p7ioc root complex */
+/* Fixup wrong class code in p7ioc and p8 root complex */
static void pnv_p7ioc_rc_quirk(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
@@ -558,6 +558,10 @@ void __init pnv_pci_init(void)
if (!found_ioda)
for_each_compatible_node(np, NULL, "ibm,p5ioc2")
pnv_pci_init_p5ioc2_hub(np);
+
+ /* Look for ioda2 built-in PHB3's */
+ for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
+ pnv_pci_init_ioda2_phb(np);
}
/* Setup the linkage between OF nodes and PHBs */
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 42ddfba..f6314d6 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -4,9 +4,9 @@
struct pci_dn;
enum pnv_phb_type {
- PNV_PHB_P5IOC2,
- PNV_PHB_IODA1,
- PNV_PHB_IODA2,
+ PNV_PHB_P5IOC2 = 0,
+ PNV_PHB_IODA1 = 1,
+ PNV_PHB_IODA2 = 2,
};
/* Precise PHB model for error management */
@@ -14,6 +14,7 @@ enum pnv_phb_model {
PNV_PHB_MODEL_UNKNOWN,
PNV_PHB_MODEL_P5IOC2,
PNV_PHB_MODEL_P7IOC,
+ PNV_PHB_MODEL_PHB3,
};
#define PNV_PCI_DIAG_BUF_SIZE 4096
@@ -148,6 +149,7 @@ extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
u64 dma_offset);
extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
extern void pnv_pci_init_ioda_hub(struct device_node *np);
+extern void pnv_pci_init_ioda2_phb(struct device_node *np);
#endif /* __POWERNV_PCI_H */
--
1.7.5.4
^ permalink raw reply related
* [PATCH 6/7] powerpc/powernv: Build DMA space for PE on PHB3
From: Gavin Shan @ 2013-04-24 9:37 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Gavin Shan
In-Reply-To: <1366796259-29412-1-git-send-email-shangw@linux.vnet.ibm.com>
The patch intends to build 32-bits DMA space for individual PEs on
PHB3. The TVE# is recognized by the combo of PE# and fixed bits
from DMA address, which is zero for 32-bits DMA space.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 102 +++++++++++++++++++++++++++--
1 files changed, 96 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 9f4d323..6bc4648 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -589,9 +589,8 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
*/
tbl->it_busno = 0;
tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
- tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
- if (phb->type == PNV_PHB_IODA1)
- tbl->it_type |= TCE_PCI_SWINV_PAIR;
+ tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE |
+ TCE_PCI_SWINV_PAIR;
}
iommu_init_table(tbl, phb->hose->node);
@@ -609,6 +608,84 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
__free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
}
+static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe)
+{
+ struct page *tce_mem = NULL;
+ void *addr;
+ const __be64 *swinvp;
+ struct iommu_table *tbl;
+ unsigned int tce_table_size, end;
+ int64_t rc;
+
+ /* We shouldn't already have a 32-bit DMA associated */
+ if (WARN_ON(pe->tce32_seg >= 0))
+ return;
+
+ /* The PE will reserve all possible 32-bits space */
+ pe->tce32_seg = 0;
+ end = (1 << ilog2(phb->ioda.m32_pci_base));
+ tce_table_size = (end / 0x1000) * 8;
+ pe_info(pe, "Setting up 32-bit TCE table at 0..%08x\n",
+ end);
+
+ /* Allocate TCE table */
+ tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL,
+ get_order(tce_table_size));
+ if (!tce_mem) {
+ pe_err(pe, "Failed to allocate a 32-bit TCE memory\n");
+ goto fail;
+ }
+ addr = page_address(tce_mem);
+ memset(addr, 0, tce_table_size);
+
+ /*
+ * Map TCE table through TVT. The TVE index is the PE number
+ * shifted by 1 bit for 32-bits DMA space.
+ */
+ rc = opal_pci_map_pe_dma_window(phb->opal_id, pe->pe_number,
+ pe->pe_number << 1, 1, __pa(addr),
+ tce_table_size, 0x1000);
+ if (rc) {
+ pe_err(pe, "Failed to configure 32-bit TCE table,"
+ " err %ld\n", rc);
+ goto fail;
+ }
+
+ /* Setup linux iommu table */
+ tbl = &pe->tce32_table;
+ pnv_pci_setup_iommu_table(tbl, addr, tce_table_size, 0);
+
+ /* Hook the IOMMU table to PHB */
+ tbl->sysdata = phb;
+
+ /* OPAL variant of PHB3 invalidated TCEs */
+ swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
+ if (swinvp) {
+ /* We need a couple more fields -- an address and a data
+ * to or. Since the bus is only printed out on table free
+ * errors, and on the first pass the data will be a relative
+ * bus number, print that out instead.
+ */
+ tbl->it_busno = 0;
+ tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
+ tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+ }
+ iommu_init_table(tbl, phb->hose->node);
+
+ if (pe->pdev)
+ set_iommu_table_base(&pe->pdev->dev, tbl);
+ else
+ pnv_ioda_setup_bus_dma(pe, pe->pbus);
+
+ return;
+fail:
+ if (pe->tce32_seg >= 0)
+ pe->tce32_seg = -1;
+ if (tce_mem)
+ __free_pages(tce_mem, get_order(tce_table_size));
+}
+
static void pnv_ioda_setup_dma(struct pnv_phb *phb)
{
struct pci_controller *hose = phb->hose;
@@ -651,9 +728,22 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb)
if (segs > remaining)
segs = remaining;
}
- pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
- pe->dma_weight, segs);
- pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs);
+
+ /*
+ * For IODA2 compliant PHB3, we needn't care about the weight.
+ * The all available 32-bits DMA space will be assigned to
+ * the specific PE.
+ */
+ if (phb->type == PNV_PHB_IODA1) {
+ pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
+ pe->dma_weight, segs);
+ pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs);
+ } else {
+ pe_info(pe, "Assign DMA32 space\n");
+ segs = 0;
+ pnv_pci_ioda2_setup_dma_pe(phb, pe);
+ }
+
remaining -= segs;
base += segs;
}
--
1.7.5.4
^ permalink raw reply related
* [PATCH 2/7] powerpc/powernv: Retrieve IODA2 tables explicitly
From: Gavin Shan @ 2013-04-24 9:37 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Gavin Shan
In-Reply-To: <1366796259-29412-1-git-send-email-shangw@linux.vnet.ibm.com>
The PHB3, which is compatible with IODA2, have lots of tables (RTT/
PETLV/PEST/IVT/RBA) in system memory and have corresponding BARs to
trace the system memory address. The tables have been allocated in
firmware and exported through device-tree. The patch retrieves the
tables explicitly.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/opal.h | 5 +--
arch/powerpc/platforms/powernv/pci-ioda.c | 35 +++++++++++++++++++++++++++++
arch/powerpc/platforms/powernv/pci.h | 13 ++++++++++
3 files changed, 50 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index a4b28f1..0af7ba0 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -491,9 +491,8 @@ int64_t opal_pci_map_pe_mmio_window(uint64_t phb_id, uint16_t pe_number,
uint16_t window_type, uint16_t window_num,
uint16_t segment_num);
int64_t opal_pci_set_phb_table_memory(uint64_t phb_id, uint64_t rtt_addr,
- uint64_t ivt_addr, uint64_t ivt_len,
- uint64_t reject_array_addr,
- uint64_t peltv_addr);
+ uint64_t peltv_addr, uint64_t pest_addr,
+ uint64_t ivt_addr, uint64_t rba_addr);
int64_t opal_pci_set_pe(uint64_t phb_id, uint64_t pe_number, uint64_t bus_dev_func,
uint8_t bus_compare, uint8_t dev_compare, uint8_t func_compare,
uint8_t pe_action);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 3d4e958..0c15870 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -852,6 +852,23 @@ static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus,
return phb->ioda.pe_rmap[(bus->number << 8) | devfn];
}
+static void __init pnv_pci_get_ioda2_table(struct device_node *np,
+ const char *name,
+ void **table,
+ unsigned int *len)
+{
+ const u32 *prop32;
+ u64 base;
+
+ prop32 = of_get_property(np, name, NULL);
+ if (prop32) {
+ base = be32_to_cpup(prop32);
+ base = base << 32 | be32_to_cpup(prop32 + 1);
+ *table = __va(base);
+ *len = be32_to_cpup(prop32 + 2);
+ }
+}
+
void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type)
{
struct pci_controller *hose;
@@ -998,6 +1015,24 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type)
ppc_md.pcibios_window_alignment = pnv_pci_window_alignment;
pci_add_flags(PCI_REASSIGN_ALL_RSRC);
+ /* Retrieve variable IODA2 tables */
+ if (ioda_type == PNV_PHB_IODA2) {
+ pnv_pci_get_ioda2_table(np, "ibm,opal-rtt-table",
+ &phb->ioda.tbl_rtt, &phb->ioda.rtt_len);
+ pnv_pci_get_ioda2_table(np, "ibm,opal-peltv-table",
+ &phb->ioda.tbl_peltv, &phb->ioda.peltv_len);
+ pnv_pci_get_ioda2_table(np, "ibm,opal-pest-table",
+ &phb->ioda.tbl_pest, &phb->ioda.pest_len);
+ pnv_pci_get_ioda2_table(np, "ibm,opal-ivt-table",
+ &phb->ioda.tbl_ivt, &phb->ioda.ivt_len);
+ pnv_pci_get_ioda2_table(np, "ibm,opal-rba-table",
+ &phb->ioda.tbl_rba, &phb->ioda.rba_len);
+ /* Get IVE stride */
+ prop32 = of_get_property(np, "ibm,opal-ive-stride", NULL);
+ if (prop32)
+ phb->ioda.ive_stride = be32_to_cpup(prop32);
+ }
+
/* Reset IODA tables to a clean state */
rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
if (rc)
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index f6314d6..c048c29 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -100,6 +100,19 @@ struct pnv_phb {
unsigned int io_segsize;
unsigned int io_pci_base;
+ /* Variable tables for IODA2 */
+ void *tbl_rtt;
+ void *tbl_peltv;
+ void *tbl_pest;
+ void *tbl_ivt;
+ void *tbl_rba;
+ unsigned int ive_stride;
+ unsigned int rtt_len;
+ unsigned int peltv_len;
+ unsigned int pest_len;
+ unsigned int ivt_len;
+ unsigned int rba_len;
+
/* PE allocation bitmap */
unsigned long *pe_alloc;
--
1.7.5.4
^ permalink raw reply related
* [PATCH 7/7] powerpc/powernv: Fix invalid IOMMU table
From: Gavin Shan @ 2013-04-24 9:37 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Gavin Shan
In-Reply-To: <1366796259-29412-1-git-send-email-shangw@linux.vnet.ibm.com>
Ben found the root cause. Commit 37f02195bee9c25ce44e25204f40b7961a6d7c9d
("powerpc/pci: fix PCI-e devices rescan issue on powerpc platform")
overwrites the IOMMU table of PCI device while enabling PCI device.
The patch intends to fix the IOMMU table after that point.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 33 ++++++++++------------------
1 files changed, 12 insertions(+), 21 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 6bc4648..c41696f 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -432,20 +432,21 @@ static void pnv_pci_ioda_setup_PEs(void)
}
}
-static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *dev)
+static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev)
{
- /* We delay DMA setup after we have assigned all PE# */
-}
+ struct pci_dn *pdn = pnv_ioda_get_pdn(pdev);
+ struct pnv_ioda_pe *pe;
-static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
-{
- struct pci_dev *dev;
+ /*
+ * The function can be called while the PE#
+ * hasn't been assigned. Do nothing for the
+ * case.
+ */
+ if (!pdn || pdn->pe_number == IODA_INVALID_PE)
+ return;
- list_for_each_entry(dev, &bus->devices, bus_list) {
- set_iommu_table_base(&dev->dev, &pe->tce32_table);
- if (dev->subordinate)
- pnv_ioda_setup_bus_dma(pe, dev->subordinate);
- }
+ pe = &phb->ioda.pe_array[pdn->pe_number];
+ set_iommu_table_base(&pdev->dev, &pe->tce32_table);
}
void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
@@ -594,11 +595,6 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
}
iommu_init_table(tbl, phb->hose->node);
- if (pe->pdev)
- set_iommu_table_base(&pe->pdev->dev, tbl);
- else
- pnv_ioda_setup_bus_dma(pe, pe->pbus);
-
return;
fail:
/* XXX Failure: Try to fallback to 64-bit only ? */
@@ -673,11 +669,6 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
}
iommu_init_table(tbl, phb->hose->node);
- if (pe->pdev)
- set_iommu_table_base(&pe->pdev->dev, tbl);
- else
- pnv_ioda_setup_bus_dma(pe, pe->pbus);
-
return;
fail:
if (pe->tce32_seg >= 0)
--
1.7.5.4
^ permalink raw reply related
* [PATCH 5/7] powerpc/powernv: TCE invalidation for PHB3
From: Gavin Shan @ 2013-04-24 9:37 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Gavin Shan
In-Reply-To: <1366796259-29412-1-git-send-email-shangw@linux.vnet.ibm.com>
The TCE should be invalidated while it's created or free'd. The
approach to do that for IODA1 and IODA2 compliant PHBs are different.
So the patch differentiate them with different functions called to
do that for IODA1 and IODA2 compliant PHBs. It's notable that the
PCI address is used to invalidate the corresponding TCE on IODA2
compliant PHB3.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/iommu.h | 1 +
arch/powerpc/platforms/powernv/pci-ioda.c | 75 ++++++++++++++++++++++++++-
arch/powerpc/platforms/powernv/pci-p5ioc2.c | 1 +
arch/powerpc/platforms/powernv/pci.c | 60 +++++----------------
arch/powerpc/platforms/powernv/pci.h | 6 ++-
5 files changed, 93 insertions(+), 50 deletions(-)
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index cbfe678..0db308e 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -76,6 +76,7 @@ struct iommu_table {
struct iommu_pool large_pool;
struct iommu_pool pools[IOMMU_NR_POOLS];
unsigned long *it_map; /* A simple allocation bitmap for now */
+ void *sysdata;
};
struct scatterlist;
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 32197af..9f4d323 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -448,6 +448,73 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
}
}
+void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
+ u64 *startp, u64 *endp)
+{
+ u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+ unsigned long start, end, inc;
+
+ start = __pa(startp);
+ end = __pa(endp);
+
+ /* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */
+ if (tbl->it_busno) {
+ start <<= 12;
+ end <<= 12;
+ inc = 128 << 12;
+ start |= tbl->it_busno;
+ end |= tbl->it_busno;
+ } else if (tbl->it_type & TCE_PCI_SWINV_PAIR) {
+ /* p7ioc-style invalidation, 2 TCEs per write */
+ start |= (1ull << 63);
+ end |= (1ull << 63);
+ inc = 16;
+ } else {
+ /* Default (older HW) */
+ inc = 128;
+ }
+
+ end |= inc - 1; /* round up end to be different than start */
+
+ mb(); /* Ensure above stores are visible */
+ while (start <= end) {
+ __raw_writeq(start, invalidate);
+ start += inc;
+ }
+
+ /*
+ * The iommu layer will do another mb() for us on build()
+ * and we don't care on free()
+ */
+}
+
+void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
+ u64 *startp, u64 *endp)
+{
+ unsigned long start, end, inc;
+ u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+ struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe,
+ tce32_table);
+
+ /* We'll invalidate DMA address in PE scope */
+ start = 0x2ul << 60;
+ start |= (pe->pe_number & 0xFF);
+ end = start;
+
+ /* Figure out the start, end and step */
+ inc = tbl->it_offset + (((u64)startp - tbl->it_base) / sizeof(u64));
+ start |= (inc << 12);
+ inc = tbl->it_offset + (((u64)endp - tbl->it_base) / sizeof(u64));
+ end |= (inc << 12);
+ inc = (0x1ul << 12);
+ mb();
+
+ while (start <= end) {
+ __raw_writeq(start, invalidate);
+ start += inc;
+ }
+}
+
static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
struct pnv_ioda_pe *pe, unsigned int base,
unsigned int segs)
@@ -509,6 +576,9 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs,
base << 28);
+ /* Hook the IOMMU table to PHB */
+ tbl->sysdata = phb;
+
/* OPAL variant of P7IOC SW invalidated TCEs */
swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
if (swinvp) {
@@ -519,8 +589,9 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
*/
tbl->it_busno = 0;
tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
- tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE
- | TCE_PCI_SWINV_PAIR;
+ tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+ if (phb->type == PNV_PHB_IODA1)
+ tbl->it_type |= TCE_PCI_SWINV_PAIR;
}
iommu_init_table(tbl, phb->hose->node);
diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
index d5c066e..177ef26 100644
--- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c
+++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
@@ -167,6 +167,7 @@ static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np,
/* Setup TCEs */
phb->dma_dev_setup = pnv_pci_p5ioc2_dma_dev_setup;
+ phb->p5ioc2.iommu_table.sysdata = phb;
pnv_pci_setup_iommu_table(&phb->p5ioc2.iommu_table,
tce_mem, tce_size, 0);
}
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index ea6a93d..f140c7a 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -348,52 +348,11 @@ struct pci_ops pnv_pci_ops = {
.write = pnv_pci_write_config,
};
-
-static void pnv_tce_invalidate(struct iommu_table *tbl,
- u64 *startp, u64 *endp)
-{
- u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
- unsigned long start, end, inc;
-
- start = __pa(startp);
- end = __pa(endp);
-
-
- /* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */
- if (tbl->it_busno) {
- start <<= 12;
- end <<= 12;
- inc = 128 << 12;
- start |= tbl->it_busno;
- end |= tbl->it_busno;
- }
- /* p7ioc-style invalidation, 2 TCEs per write */
- else if (tbl->it_type & TCE_PCI_SWINV_PAIR) {
- start |= (1ull << 63);
- end |= (1ull << 63);
- inc = 16;
- }
- /* Default (older HW) */
- else
- inc = 128;
-
- end |= inc - 1; /* round up end to be different than start */
-
- mb(); /* Ensure above stores are visible */
- while (start <= end) {
- __raw_writeq(start, invalidate);
- start += inc;
- }
- /* The iommu layer will do another mb() for us on build() and
- * we don't care on free()
- */
-}
-
-
static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
unsigned long uaddr, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
+ struct pnv_phb *phb = tbl->sysdata;
u64 proto_tce;
u64 *tcep, *tces;
u64 rpn;
@@ -413,14 +372,19 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
* need that flush. We'll probably turn it_type into a bit mask
* of flags if that becomes the case
*/
- if (tbl->it_type & TCE_PCI_SWINV_CREATE)
- pnv_tce_invalidate(tbl, tces, tcep - 1);
+ if (tbl->it_type & TCE_PCI_SWINV_CREATE) {
+ if (phb->type == PNV_PHB_IODA1)
+ pnv_pci_ioda1_tce_invalidate(tbl, tces, tcep - 1);
+ else
+ pnv_pci_ioda2_tce_invalidate(tbl, tces, tcep - 1);
+ }
return 0;
}
static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
{
+ struct pnv_phb *phb = tbl->sysdata;
u64 *tcep, *tces;
tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
@@ -428,8 +392,12 @@ static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
while (npages--)
*(tcep++) = 0;
- if (tbl->it_type & TCE_PCI_SWINV_FREE)
- pnv_tce_invalidate(tbl, tces, tcep - 1);
+ if (tbl->it_type & TCE_PCI_SWINV_CREATE) {
+ if (phb->type == PNV_PHB_IODA1)
+ pnv_pci_ioda1_tce_invalidate(tbl, tces, tcep - 1);
+ else
+ pnv_pci_ioda2_tce_invalidate(tbl, tces, tcep - 1);
+ }
}
static unsigned long pnv_tce_get(struct iommu_table *tbl, long index)
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index c6690b3..3cdc878 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -164,6 +164,8 @@ extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
extern void pnv_pci_init_ioda_hub(struct device_node *np);
extern void pnv_pci_init_ioda2_phb(struct device_node *np);
-
-
+extern void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
+ u64 *startp, u64 *endp);
+extern void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
+ u64 *startp, u64 *endp);
#endif /* __POWERNV_PCI_H */
--
1.7.5.4
^ permalink raw reply related
* [PATCH v3 0/7] powerpc/powernv: PHB3 Support
From: Gavin Shan @ 2013-04-24 9:37 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Gavin Shan
The patchset includes minimal support for PHB3. Initially, flag "PNV_PHB_IODA2"
is introduced to differentiate IODA2 compliant PHB3 from other types of PHBs and
do initialization accordingly for PHB3. Besides, variable IODA2 tables reside in
system memory and we allocate them in kernel, then pass them to f/w and enable
the corresponding BARs through OPAL API. The P/Q bits of IVE should be handled
on PHB3 by software and the patchset intends to cover that as well.
NOTE: The first patch comes from Ben.
v2 -> v3
* Remove the unnecessary quirk. That's only useful with simics
* Do MSI EOI in single OPAL API opal_pci_msi_eoi()
* Use explicit branch to fully utilize CPU's prefetching engine
while doing TCE invalidation
* Add one patch to fix invalid IOMMU table for PCI devices
v1 -> v2
* Introduce CONFIG_POWERNV_MSI, which is similiar to CONFIG_PSERIES_MSI
* Enable CONFIG_PPC_MSI_BITMAP while selecting CONFIG_POWERNV_MSI
* Eleminate (struct pnv_phb::msi_count) since it has been removed in
linux-next
* Replace (CONFIG_PPC_POWERNV && CONFIG_PCI_MSI) with CONFIG_POWERNV_MSI
* Move declaration of pnv_pci_msi_eoi() to asm/xics.h
* Remove unnecessary "#ifdef ... #endif" in icp-native.c
* Add support to invalidate TCE
* Let the IODA2 table allocated by firmware and kernel to retrieve them
through device-tree
---
arch/powerpc/include/asm/iommu.h | 1 +
arch/powerpc/include/asm/opal.h | 7 +-
arch/powerpc/include/asm/xics.h | 3 +
arch/powerpc/platforms/powernv/Kconfig | 5 +
arch/powerpc/platforms/powernv/opal-wrappers.S | 1 +
arch/powerpc/platforms/powernv/pci-ioda.c | 301 ++++++++++++++++++++----
arch/powerpc/platforms/powernv/pci-p5ioc2.c | 1 +
arch/powerpc/platforms/powernv/pci.c | 85 +++----
arch/powerpc/platforms/powernv/pci.h | 28 ++-
arch/powerpc/sysdev/Kconfig | 1 +
arch/powerpc/sysdev/xics/icp-native.c | 27 ++-
11 files changed, 356 insertions(+), 104 deletions(-)
Thanks,
Gavin
^ permalink raw reply
* [PATCH 4/7] powerpc/powernv: Patch MSI EOI handler on P8
From: Gavin Shan @ 2013-04-24 9:37 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Gavin Shan
In-Reply-To: <1366796259-29412-1-git-send-email-shangw@linux.vnet.ibm.com>
The EOI handler of MSI/MSI-X interrupts for P8 (PHB3) need additional
steps to handle the P/Q bits in IVE before EOIing the corresponding
interrupt. The patch changes the EOI handler to cover that.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
---
arch/powerpc/include/asm/opal.h | 2 +
arch/powerpc/include/asm/xics.h | 3 ++
arch/powerpc/platforms/powernv/opal-wrappers.S | 1 +
arch/powerpc/platforms/powernv/pci-ioda.c | 16 ++++++++++++++
arch/powerpc/platforms/powernv/pci.c | 19 ++++++++++++++++
arch/powerpc/platforms/powernv/pci.h | 1 +
arch/powerpc/sysdev/xics/icp-native.c | 27 +++++++++++++++++++++++-
7 files changed, 68 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 0af7ba0..93dad52 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -117,6 +117,7 @@ extern int opal_enter_rtas(struct rtas_args *args,
#define OPAL_SET_SLOT_LED_STATUS 55
#define OPAL_GET_EPOW_STATUS 56
#define OPAL_SET_SYSTEM_ATTENTION_LED 57
+#define OPAL_PCI_MSI_EOI 63
#ifndef __ASSEMBLY__
@@ -505,6 +506,7 @@ int64_t opal_pci_get_xive_reissue(uint64_t phb_id, uint32_t xive_number,
uint8_t *p_bit, uint8_t *q_bit);
int64_t opal_pci_set_xive_reissue(uint64_t phb_id, uint32_t xive_number,
uint8_t p_bit, uint8_t q_bit);
+int64_t opal_pci_msi_eoi(uint64_t phb_id, uint32_t ive_number);
int64_t opal_pci_set_xive_pe(uint64_t phb_id, uint32_t pe_number,
uint32_t xive_num);
int64_t opal_get_xive_source(uint64_t phb_id, uint32_t xive_num,
diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h
index 4ae9a09..c4b364b 100644
--- a/arch/powerpc/include/asm/xics.h
+++ b/arch/powerpc/include/asm/xics.h
@@ -72,6 +72,9 @@ extern int ics_opal_init(void);
static inline int ics_opal_init(void) { return -ENODEV; }
#endif
+/* Extra EOI handler for PHB3 */
+extern int pnv_pci_msi_eoi(unsigned int hw_irq);
+
/* ICS instance, hooked up to chip_data of an irq */
struct ics {
struct list_head link;
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 3bb07e5..6fabe92 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -107,3 +107,4 @@ OPAL_CALL(opal_pci_mask_pe_error, OPAL_PCI_MASK_PE_ERROR);
OPAL_CALL(opal_set_slot_led_status, OPAL_SET_SLOT_LED_STATUS);
OPAL_CALL(opal_get_epow_status, OPAL_GET_EPOW_STATUS);
OPAL_CALL(opal_set_system_attention_led, OPAL_SET_SYSTEM_ATTENTION_LED);
+OPAL_CALL(opal_pci_msi_eoi, OPAL_PCI_MSI_EOI);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 0c15870..32197af 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -646,6 +646,20 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
return 0;
}
+static int pnv_pci_ioda_msi_eoi(struct pnv_phb *phb, unsigned int hw_irq)
+{
+ long rc;
+
+ rc = opal_pci_msi_eoi(phb->opal_id, hw_irq - phb->msi_base);
+ if (rc) {
+ pr_warning("%s: Failed to EOI IRQ#%d on PHB#%d, rc=%ld\n",
+ __func__, hw_irq, phb->hose->global_number, rc);
+ return -EIO;
+ }
+
+ return 0;
+}
+
static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
{
unsigned int count;
@@ -667,6 +681,8 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
}
phb->msi_setup = pnv_pci_ioda_msi_setup;
+ if (phb->type == PNV_PHB_IODA2)
+ phb->msi_eoi = pnv_pci_ioda_msi_eoi;
phb->msi32_support = 1;
pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n",
count, phb->msi_base);
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index a11b5a6..ea6a93d 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -115,6 +115,25 @@ static void pnv_teardown_msi_irqs(struct pci_dev *pdev)
irq_dispose_mapping(entry->irq);
}
}
+
+int pnv_pci_msi_eoi(unsigned int hw_irq)
+{
+ struct pci_controller *hose, *tmp;
+ struct pnv_phb *phb = NULL;
+
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+ phb = hose->private_data;
+ if (hw_irq >= phb->msi_base &&
+ hw_irq < phb->msi_base + phb->msi_bmp.irq_count) {
+ if (!phb->msi_eoi)
+ return -EEXIST;
+ return phb->msi_eoi(phb, hw_irq);
+ }
+ }
+
+ /* For LSI interrupts, we needn't do it */
+ return 0;
+}
#endif /* CONFIG_PCI_MSI */
static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb)
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index c048c29..c6690b3 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -81,6 +81,7 @@ struct pnv_phb {
int (*msi_setup)(struct pnv_phb *phb, struct pci_dev *dev,
unsigned int hwirq, unsigned int is_64,
struct msi_msg *msg);
+ int (*msi_eoi)(struct pnv_phb *phb, unsigned int hw_irq);
void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev);
void (*fixup_phb)(struct pci_controller *hose);
u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn);
diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c
index 48861d3..38dd2b1 100644
--- a/arch/powerpc/sysdev/xics/icp-native.c
+++ b/arch/powerpc/sysdev/xics/icp-native.c
@@ -89,6 +89,22 @@ static void icp_native_eoi(struct irq_data *d)
icp_native_set_xirr((xics_pop_cppr() << 24) | hw_irq);
}
+static void icp_p8_native_eoi(struct irq_data *d)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ int ret;
+
+ /* Let firmware handle P/Q bits */
+ if (hw_irq != XICS_IPI) {
+ ret = pnv_pci_msi_eoi(hw_irq);
+ WARN_ON_ONCE(ret);
+ }
+
+ /* EOI on ICP */
+ iosync();
+ icp_native_set_xirr((xics_pop_cppr() << 24) | hw_irq);
+}
+
static void icp_native_teardown_cpu(void)
{
int cpu = smp_processor_id();
@@ -264,7 +280,7 @@ static int __init icp_native_init_one_node(struct device_node *np,
return 0;
}
-static const struct icp_ops icp_native_ops = {
+static struct icp_ops icp_native_ops = {
.get_irq = icp_native_get_irq,
.eoi = icp_native_eoi,
.set_priority = icp_native_set_cpu_priority,
@@ -296,6 +312,15 @@ int __init icp_native_init(void)
if (found == 0)
return -ENODEV;
+ /* Change the EOI handler for P8 */
+#ifdef CONFIG_POWERNV_MSI
+ np = of_find_compatible_node(NULL, NULL, "ibm,power8-xicp");
+ if (np) {
+ icp_native_ops.eoi = icp_p8_native_eoi;
+ of_node_put(np);
+ }
+#endif
+
icp_ops = &icp_native_ops;
return 0;
--
1.7.5.4
^ permalink raw reply related
* [PATCH] powerpc: Add isync to copy_and_flush
From: Michael Neuling @ 2013-04-24 10:30 UTC (permalink / raw)
To: benh; +Cc: Linux PPC dev, miltonm, Nishanth Aravamudan
In __after_prom_start we copy the kernel down to zero in two calls to
copy_and_flush. After the first call (copy from 0 to copy_to_here:)
we jump to the newly copied code soon after.
Unfortunately there's no isync between the copy of this code and the
jump to it. Hence it's possible that stale instructions could still be
in the icache or pipeline before we branch to it.
We've seen this on real machines and it's results in no console output
after:
calling quiesce...
returning from prom_init
The below adds an isync to ensure that the copy and flushing has
completed before any branching to the new instructions occurs.
Signed-off-by: Michael Neuling <mikey@neuling.org>
cc: stable@kernel.org
---
benh: we should get this in 3.9 ASAP.
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 0886ae6..b61363d 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -509,6 +509,7 @@ _GLOBAL(copy_and_flush)
sync
addi r5,r5,8
addi r6,r6,8
+ isync
blr
.align 8
^ permalink raw reply related
* Re: "attempt to move .org backwards" still show up
From: Michael Neuling @ 2013-04-24 10:37 UTC (permalink / raw)
To: Mike Qiu
Cc: sfr, matt, gang.chen, linux-kernel, paulus, Aneesh Kumar K.V,
linuxppc-dev
In-Reply-To: <51779941.8080403@linux.vnet.ibm.com>
Mike Qiu <qiudayu@linux.vnet.ibm.com> wrote:
> =E4=BA=8E 2013/4/24 16:31, Michael Ellerman =E5=86=99=E9=81=93:
> > On Wed, Apr 24, 2013 at 04:22:53PM +0800, Mike Qiu wrote:
> >> Hi all
> >>
> >> I get an error message when I compile the source code in Power7 platfo=
rm
> >> use the newest upstream kernel.
> > Hi Mike,
> >
> > It depends on what your .config is. What defconfig are you building?
> I just copy the config file from /boot/config.* to .config and use make
> menuconfig
> change nothing by manually, then save.
Can you post the resulting config here?
Do you have commit in your tree?
commit 087aa036eb79f24b856893190359ba812b460f45
Author: Chen Gang <gang.chen@asianux.com>
powerpc: make additional room in exception vector area
Mikey
^ permalink raw reply
* Re: [PATCH 2/3 v14] iommu/fsl: Add additional iommu attributes required by the PAMU driver.
From: Joerg Roedel @ 2013-04-24 10:51 UTC (permalink / raw)
To: Sethi Varun-B16395
Cc: Wood Scott-B07421, linux-kernel@vger.kernel.org,
Yoder Stuart-B08248, iommu@lists.linux-foundation.org,
linuxppc-dev@lists.ozlabs.org
In-Reply-To: <C5ECD7A89D1DC44195F34B25E172658D4B4D9A@039-SN2MPN1-011.039d.mgd.msft.net>
On Tue, Apr 23, 2013 at 02:10:25PM +0000, Sethi Varun-B16395 wrote:
> I think it's fine to have the header under linux, actually I also the
> intel-iommu header under linux.
Yes, the difference is that VT-d runs on x86 and on ia64. So there is no
single arch where the header could be placed. The amd-iommu.h file on
the other hand is x86 only and should also be moved to asm/, as I just
found out :)
And as long as PAMU is only needed on a single architecture the header
should also be arch-specific. If that changes someday the header can be
moved to a generic place.
Joerg
^ permalink raw reply
* [RFC] device-tree.git automatic sync from linux.git
From: Ian Campbell @ 2013-04-24 10:48 UTC (permalink / raw)
To: linux-kernel
Cc: linux-mips, linux-c6x-dev, linux-xtensa, microblaze-uclinux, x86,
linux, linuxppc-dev, linux-arm-kernel
Hi,
First off apologies for the large CC list -- I think this catches the
arch list for all the arches with device tree source in the tree.
Various folks have expressed an interest in eventually splitting the
device tree bindings out of the Linux git repository into a separate
tree. This should help reduce the cross talk between the code and the
bindings and to make it difficult to accidentally "co-evolve" the
bindings and the code (i.e. break compatibility) etc. There are also
other projects (such as Xen) which would also like to use device-tree as
an OS agnostic description of the hardware.
I was talking to Grant about this at this Spring's LinaroConnect in Hong
Kong and as a first step he was interested in a device-tree.git
repository which is automatically kept insync with the main Linux tree.
Somehow I found myself volunteering to set up that tree.
An RFC repository can be found at:
http://xenbits.xen.org/gitweb/?p=people/ianc/device-tree-rebasing.git
This is created using git filter-branch and retains the full history for
the device tree source files up to v3.9-rc8.
The master branch contains everything including the required build
infrastructure while upstream/master and upstream/dts contain the most
recently converted upstream master branch and the pristine converted
version respectively. Each upstream tag T is paired with a tag T-dts
which is the converted version of that tag.
Note that the tree will be potentially rebasing (hence the name) for the
time being while I'm still smoothing out the conversion process.
The paths to include in the conversion are described in
scripts/rewrite-paths.sed. The generic cases are:
arch/ARCH/boot/dts/*.dts and *.dts? (for dtsi and dtsp etc)
arch/ARCH/boot/*.dts and *.dts?
arch/ARCH/include/dts/* (currently unused?)
which become src/ARCH/*.dts and *.dts? plus src/ARCH/include/*
There are also some special cases for some arches which don't follow
this pattern and for older versions of the kernel which were less
consistent. The paths were gleaned from git ls-tree + grep on every tag
in the tree, so if a file was added and moved between two rcs then the
original path may not be covered (so the move will look like it just
adds the files).
In principal this supports the new .dtsp files and includes the required
include paths in the conversion but none of them seem to be in mainline
yet, so we'll have to see!
The initial conversion took in excess of 40 hours (running out of a
ramdisk) so even if the result is stable in terms of commit ids etc a
fresh conversion every time isn't an option for a ~daily sync so I had
to create a slightly hacked around git-filter-branch (found in
scripts/git-filter-branch) to support incremental filtering, which I
intend to send to the git folks soon.
Please let me know what you think.
Ian.
[0] real 2533m32.142s
user 2393m35.039s
sys 343m44.385s
^ permalink raw reply
* Re: [PATCH v2 01/15] powerpc/85xx: cache operations for Freescale SoCs based on BOOK3E
From: Zhao Chenhui @ 2013-04-24 11:08 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev, linux-kernel, r58472
In-Reply-To: <1366760770.5825.17@snotra>
On Tue, Apr 23, 2013 at 06:46:10PM -0500, Scott Wood wrote:
> On 04/19/2013 05:47:34 AM, Zhao Chenhui wrote:
> >These cache operations support Freescale SoCs based on BOOK3E.
> >Move L1 cache operations to fsl_booke_cache.S in order to maintain
> >easily. And, add cache operations for backside L2 cache and
> >platform cache.
> >
> >The backside L2 cache appears on e500mc and e5500 core. The
> >platform cache
> >supported by this patch is L2 Look-Aside Cache, which appears on SoCs
> >with e500v1/e500v2 core, such as MPC8572, P1020, etc.
> >
> >Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> >Signed-off-by: Li Yang <leoli@freescale.com>
> >---
> > arch/powerpc/include/asm/cacheflush.h | 8 ++
> > arch/powerpc/kernel/Makefile | 1 +
> > arch/powerpc/kernel/fsl_booke_cache.S | 210
> >+++++++++++++++++++++++++++++++++
> > arch/powerpc/kernel/head_fsl_booke.S | 74 ------------
> > 4 files changed, 219 insertions(+), 74 deletions(-)
> > create mode 100644 arch/powerpc/kernel/fsl_booke_cache.S
> >
> >diff --git a/arch/powerpc/include/asm/cacheflush.h
> >b/arch/powerpc/include/asm/cacheflush.h
> >index b843e35..bc3f937 100644
> >--- a/arch/powerpc/include/asm/cacheflush.h
> >+++ b/arch/powerpc/include/asm/cacheflush.h
> >@@ -32,6 +32,14 @@ extern void flush_dcache_page(struct page *page);
> >
> > extern void __flush_disable_L1(void);
> >
> >+#ifdef CONFIG_FSL_SOC_BOOKE
> >+void flush_dcache_L1(void);
> >+void flush_backside_L2_cache(void);
> >+void disable_backside_L2_cache(void);
> >+void flush_disable_L2(void);
> >+void invalidate_enable_L2(void);
> >+#endif
>
> Don't ifdef prototypes unless there's a good reason, such as
> providing an inline alternative.
I'll get rid of this "#ifdef".
>
> Why do you have "flush_backside_L2_cache" and
> "disable_backside_L2_cache" as something different from
> "flush_disable_L2"? The latter should flush whatever L2 is present.
> Don't treat pre-corenet as the default.
>
These L2 caches are very different. The backside L2 is integrated in
the e500mc/e5500 core and controlled by SPR registers. But, the latter
L2 cache is on the SoC and controlled by registers mapped in CCSR.
> Why do we even need to distinguish L1 from L2 at all? Shouldn't the
> function that gets exposed just be "flush and disable data caches
> that are specific to this cpu"? What should happen on e6500?
>
> -Scott
Yes. It is a good idea to use a set of uniform functions to operate the caches of
e500/e500mc/e5500/e6500 and SoCs. I'll think over your comments.
Thanks for you comments.
-Chenhui
^ permalink raw reply
* Re: [PATCH v2 13/15] powerpc/85xx: add support for e6500 L1 cache operation
From: Zhao Chenhui @ 2013-04-24 11:14 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev, linux-kernel, r58472
In-Reply-To: <1366761649.5825.20@snotra>
On Tue, Apr 23, 2013 at 07:00:49PM -0500, Scott Wood wrote:
> On 04/19/2013 05:47:46 AM, Zhao Chenhui wrote:
> >From: Chen-Hui Zhao <chenhui.zhao@freescale.com>
> >
> >The L1 Data Cache of e6500 contains no modified data, no flush
> >is required.
> >
> >Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> >Signed-off-by: Li Yang <leoli@freescale.com>
> >Signed-off-by: Andy Fleming <afleming@freescale.com>
> >---
> > arch/powerpc/kernel/fsl_booke_cache.S | 11 ++++++++++-
> > 1 files changed, 10 insertions(+), 1 deletions(-)
> >
> >diff --git a/arch/powerpc/kernel/fsl_booke_cache.S
> >b/arch/powerpc/kernel/fsl_booke_cache.S
> >index 232c47b..24a52bb 100644
> >--- a/arch/powerpc/kernel/fsl_booke_cache.S
> >+++ b/arch/powerpc/kernel/fsl_booke_cache.S
> >@@ -65,13 +65,22 @@ _GLOBAL(flush_dcache_L1)
> >
> > blr
> >
> >+#define PVR_E6500 0x8040
> >+
> > /* Flush L1 d-cache, invalidate and disable d-cache and i-cache */
> > _GLOBAL(__flush_disable_L1)
> >+/* L1 Data Cache of e6500 contains no modified data, no flush is
> >required */
> >+ mfspr r3, SPRN_PVR
> >+ rlwinm r4, r3, 16, 0xffff
> >+ lis r5, 0
> >+ ori r5, r5, PVR_E6500@l
> >+ cmpw r4, r5
> >+ beq 2f
> > mflr r10
> > bl flush_dcache_L1 /* Flush L1 d-cache */
> > mtlr r10
> >
> >- msync
> >+2: msync
> > mfspr r4, SPRN_L1CSR0 /* Invalidate and disable d-cache */
> > li r5, 2
> > rlwimi r4, r5, 0, 3
>
> Note that disabling the cache is a core operation, rather than a
> thread operation. Is this only called when the second thread is
> disabled?
>
> -Scott
It is called only when a core is down.
I can add a comment in the code.
-Chenhui
^ permalink raw reply
* RE: [PATCH 2/3 v14] iommu/fsl: Add additional iommu attributes required by the PAMU driver.
From: Sethi Varun-B16395 @ 2013-04-24 11:21 UTC (permalink / raw)
To: Joerg Roedel
Cc: Wood Scott-B07421, linux-kernel@vger.kernel.org,
Yoder Stuart-B08248, iommu@lists.linux-foundation.org,
linuxppc-dev@lists.ozlabs.org
In-Reply-To: <20130424105117.GI17148@8bytes.org>
> -----Original Message-----
> From: Joerg Roedel [mailto:joro@8bytes.org]
> Sent: Wednesday, April 24, 2013 4:21 PM
> To: Sethi Varun-B16395
> Cc: iommu@lists.linux-foundation.org; linuxppc-dev@lists.ozlabs.org;
> linux-kernel@vger.kernel.org; galak@kernel.crashing.org;
> benh@kernel.crashing.org; Yoder Stuart-B08248; Wood Scott-B07421
> Subject: Re: [PATCH 2/3 v14] iommu/fsl: Add additional iommu attributes
> required by the PAMU driver.
>=20
> On Tue, Apr 23, 2013 at 02:10:25PM +0000, Sethi Varun-B16395 wrote:
> > I think it's fine to have the header under linux, actually I also the
> > intel-iommu header under linux.
>=20
> Yes, the difference is that VT-d runs on x86 and on ia64. So there is no
> single arch where the header could be placed. The amd-iommu.h file on the
> other hand is x86 only and should also be moved to asm/, as I just found
> out :)
>=20
> And as long as PAMU is only needed on a single architecture the header
> should also be arch-specific. If that changes someday the header can be
> moved to a generic place.
>=20
Ok, I will post the next version of the patch set.
-Varun
^ permalink raw reply
* Re: [PATCH v2 12/15] powerpc/85xx: add time base sync support for e6500
From: Zhao Chenhui @ 2013-04-24 11:29 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev, linux-kernel, r58472
In-Reply-To: <1366761846.5825.21@snotra>
On Tue, Apr 23, 2013 at 07:04:06PM -0500, Scott Wood wrote:
> On 04/19/2013 05:47:45 AM, Zhao Chenhui wrote:
> >From: Chen-Hui Zhao <chenhui.zhao@freescale.com>
> >
> >For e6500, two threads in one core share one time base. Just need
> >to do time base sync on first thread of one core, and skip it on
> >the other thread.
> >
> >Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> >Signed-off-by: Li Yang <leoli@freescale.com>
> >Signed-off-by: Andy Fleming <afleming@freescale.com>
> >---
> > arch/powerpc/platforms/85xx/smp.c | 52
> >+++++++++++++++++++++++++++++++-----
> > 1 files changed, 44 insertions(+), 8 deletions(-)
> >
> >diff --git a/arch/powerpc/platforms/85xx/smp.c
> >b/arch/powerpc/platforms/85xx/smp.c
> >index 74d8cde..5f3eee3 100644
> >--- a/arch/powerpc/platforms/85xx/smp.c
> >+++ b/arch/powerpc/platforms/85xx/smp.c
> >@@ -26,6 +26,7 @@
> > #include <asm/cacheflush.h>
> > #include <asm/dbell.h>
> > #include <asm/fsl_guts.h>
> >+#include <asm/cputhreads.h>
> >
> > #include <sysdev/fsl_soc.h>
> > #include <sysdev/mpic.h>
> >@@ -45,6 +46,7 @@ static u64 timebase;
> > static int tb_req;
> > static int tb_valid;
> > static u32 cur_booting_core;
> >+static bool rcpmv2;
> >
> > #ifdef CONFIG_PPC_E500MC
> > /* get a physical mask of online cores and booting core */
> >@@ -53,26 +55,40 @@ static inline u32 get_phy_cpu_mask(void)
> > u32 mask;
> > int cpu;
> >
> >- mask = 1 << cur_booting_core;
> >- for_each_online_cpu(cpu)
> >- mask |= 1 << get_hard_smp_processor_id(cpu);
> >+ if (smt_capable()) {
> >+ /* two threads in one core share one time base */
> >+ mask = 1 << cpu_core_index_of_thread(cur_booting_core);
> >+ for_each_online_cpu(cpu)
> >+ mask |= 1 << cpu_core_index_of_thread(
> >+ get_hard_smp_processor_id(cpu));
> >+ } else {
> >+ mask = 1 << cur_booting_core;
> >+ for_each_online_cpu(cpu)
> >+ mask |= 1 << get_hard_smp_processor_id(cpu);
> >+ }
>
> Where is smt_capable defined()? I assume somewhere in the patchset
> but it's a pain to search 12 patches...
>
It is defined in arch/powerpc/include/asm/topology.h.
#define smt_capable() (cpu_has_feature(CPU_FTR_SMT))
Thanks for your review again.
> Is this really about whether we're SMT-capable or whether we have
> rcpm v2?
>
> -Scott
I think this "if" statement can be removed. The cpu_core_index_of_thread()
can return the correct cpu number with thread or without thread.
Like this:
static inline u32 get_phy_cpu_mask(void)
{
u32 mask;
int cpu;
mask = 1 << cpu_core_index_of_thread(cur_booting_core);
for_each_online_cpu(cpu)
mask |= 1 << cpu_core_index_of_thread(
get_hard_smp_processor_id(cpu));
return mask;
}
-Chenhui
^ permalink raw reply
* [PATCH 2/2 v15] iommu/fsl: Freescale PAMU driver and iommu implementation.
From: Varun Sethi @ 2013-04-24 11:35 UTC (permalink / raw)
To: joro, iommu, linuxppc-dev, linux-kernel, galak, benh,
stuart.yoder, scottwood
Cc: Varun Sethi, Timur Tabi
In-Reply-To: <1366803351-17429-1-git-send-email-Varun.Sethi@freescale.com>
Following is a brief description of the PAMU hardware:
PAMU determines what action to take and whether to authorize the action on
the basis of the memory address, a Logical IO Device Number (LIODN), and
PAACT table (logically) indexed by LIODN and address. Hardware devices which
need to access memory must provide an LIODN in addition to the memory address.
Peripheral Access Authorization and Control Tables (PAACTs) are the primary
data structures used by PAMU. A PAACT is a table of peripheral access
authorization and control entries (PAACE).Each PAACE defines the range of
I/O bus address space that is accessible by the LIOD and the associated access
capabilities.
There are two types of PAACTs: primary PAACT (PPAACT) and secondary PAACT
(SPAACT).A given physical I/O device may be able to act as one or more
independent logical I/O devices (LIODs). Each such logical I/O device is
assigned an identifier called logical I/O device number (LIODN). A LIODN is
allocated a contiguous portion of the I/O bus address space called the DSA window
for performing DSA operations. The DSA window may optionally be divided into
multiple sub-windows, each of which may be used to map to a region in system
storage space. The first sub-window is referred to as the primary sub-window
and the remaining are called secondary sub-windows.
This patch provides the PAMU driver (fsl_pamu.c) and the corresponding IOMMU
API implementation (fsl_pamu_domain.c). The PAMU hardware driver (fsl_pamu.c)
has been derived from the work done by Ashish Kalra and Timur Tabi.
Signed-off-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
---
changes in v15:
- Updated path for fsl_pamu_stash.h.
changes in v14:
- Use updated PAMU specific attributes.
changes in v13:
- Use the new header drivers/iommu/pci.h
- fix geometry configured check.
changes in v12:
- Use is_power_of_2 for checking alignement.
- Check for multifucntion PCI device ACS flags for determining device groups.
- Fix get_stash_id function.
- Don't crash in case of access violations, disable the LIODN.
- Don't use list_empty while traversing list using list for each entry.
- Move stash structure and ids to PAMU header files.
- Fix geometry size calculation.
changes in v11:
- changed iova to dma_addr_t in iova_to_phys API.
changes in v10:
- Support for new guts compatibe string for T4 & B4 devices.
- Modified comment about port ID and mentioned the errata number.
- Fixed the issue where data pointer was not freed in case of a an error.
- Pass data pointer while freeing irq.
- Whle initializing the SPAACE entry clear the valid bit.
changes in v9:
- Merged and createad a single function to delete
a device from domain list.
- Refactored the add_device API code.
- Renamed the paace and spaace init fucntions.
- Renamed functions for mapping windows and subwindows.
- Changed the MAX LIODN value to MAX value u-boot can
program.
- Hard coded maximum number of subwindows.
changes in v8:
- implemented the new API for window based IOMMUs.
changes in v7:
- Set max_subwidows in the geometry attribute.
- Add checking for maximum supported LIODN value.
- Use upper_32_bits and lower_32_bits macros while
intializing PAMU data structures.
changes in v6:
- Simplified complex conditional statements.
- Fixed indentation issues.
- Added comments for IOMMU API implementation.
changes in v5:
- Addressed comments from Timur.
changes in v4:
- Addressed comments from Timur and Scott.
changes in v3:
- Addressed comments by Kumar Gala
- dynamic fspi allocation
- fixed alignment check in map and unmap
arch/powerpc/sysdev/fsl_pci.h | 5 +
drivers/iommu/Kconfig | 10 +
drivers/iommu/Makefile | 1 +
drivers/iommu/fsl_pamu.c | 1309 +++++++++++++++++++++++++++++++++++++++
drivers/iommu/fsl_pamu.h | 410 ++++++++++++
drivers/iommu/fsl_pamu_domain.c | 1142 ++++++++++++++++++++++++++++++++++
drivers/iommu/fsl_pamu_domain.h | 85 +++
7 files changed, 2962 insertions(+), 0 deletions(-)
create mode 100644 drivers/iommu/fsl_pamu.c
create mode 100644 drivers/iommu/fsl_pamu.h
create mode 100644 drivers/iommu/fsl_pamu_domain.c
create mode 100644 drivers/iommu/fsl_pamu_domain.h
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index c495c00..feb34f6 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -14,6 +14,11 @@
#ifndef __POWERPC_FSL_PCI_H
#define __POWERPC_FSL_PCI_H
+
+/* FSL PCI controller BRR1 register */
+#define PCI_FSL_BRR1 0xbf8
+#define PCI_FSL_BRR1_VER 0xffff
+
#define PCIE_LTSSM 0x0404 /* PCIE Link Training and Status */
#define PCIE_LTSSM_L0 0x16 /* L0 state */
#define PCIE_IP_REV_2_2 0x02080202 /* PCIE IP block version Rev2.2 */
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index c332fb9..f97db88 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -17,6 +17,16 @@ config OF_IOMMU
def_bool y
depends on OF
+config FSL_PAMU
+ bool "Freescale IOMMU support"
+ depends on PPC_E500MC
+ select IOMMU_API
+ select GENERIC_ALLOCATOR
+ help
+ Freescale PAMU support. PAMU is the IOMMU present on Freescale QorIQ platforms.
+ PAMU can authorize memory access, remap the memory address, and remap I/O
+ transaction types.
+
# MSM IOMMU support
config MSM_IOMMU
bool "MSM IOMMU Support"
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index ef0e520..027d1af 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_TEGRA_IOMMU_SMMU) += tegra-smmu.o
obj-$(CONFIG_EXYNOS_IOMMU) += exynos-iommu.o
obj-$(CONFIG_SHMOBILE_IOMMU) += shmobile-iommu.o
obj-$(CONFIG_SHMOBILE_IPMMU) += shmobile-ipmmu.o
+obj-$(CONFIG_FSL_PAMU) += fsl_pamu.o fsl_pamu_domain.o
diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
new file mode 100644
index 0000000..d9a27c5
--- /dev/null
+++ b/drivers/iommu/fsl_pamu.c
@@ -0,0 +1,1309 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ */
+
+#define pr_fmt(fmt) "fsl-pamu: %s: " fmt, __func__
+
+#include <linux/init.h>
+#include <linux/iommu.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+#include <linux/bootmem.h>
+#include <linux/genalloc.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <asm/fsl_guts.h>
+
+#include "fsl_pamu.h"
+
+/* define indexes for each operation mapping scenario */
+#define OMI_QMAN 0x00
+#define OMI_FMAN 0x01
+#define OMI_QMAN_PRIV 0x02
+#define OMI_CAAM 0x03
+
+#define make64(high, low) (((u64)(high) << 32) | (low))
+
+struct pamu_isr_data {
+ void __iomem *pamu_reg_base; /* Base address of PAMU regs*/
+ unsigned int count; /* The number of PAMUs */
+};
+
+static struct paace *ppaact;
+static struct paace *spaact;
+static struct ome *omt;
+
+/*
+ * Table for matching compatible strings, for device tree
+ * guts node, for QorIQ SOCs.
+ * "fsl,qoriq-device-config-2.0" corresponds to T4 & B4
+ * SOCs. For the older SOCs "fsl,qoriq-device-config-1.0"
+ * string would be used.
+*/
+static const struct of_device_id guts_device_ids[] = {
+ { .compatible = "fsl,qoriq-device-config-1.0", },
+ { .compatible = "fsl,qoriq-device-config-2.0", },
+ {}
+};
+
+
+/*
+ * Table for matching compatible strings, for device tree
+ * L3 cache controller node.
+ * "fsl,t4240-l3-cache-controller" corresponds to T4,
+ * "fsl,b4860-l3-cache-controller" corresponds to B4 &
+ * "fsl,p4080-l3-cache-controller" corresponds to other,
+ * SOCs.
+*/
+static const struct of_device_id l3_device_ids[] = {
+ { .compatible = "fsl,t4240-l3-cache-controller", },
+ { .compatible = "fsl,b4860-l3-cache-controller", },
+ { .compatible = "fsl,p4080-l3-cache-controller", },
+ {}
+};
+
+/* maximum subwindows permitted per liodn */
+static u32 max_subwindow_count;
+
+/* Pool for fspi allocation */
+struct gen_pool *spaace_pool;
+
+/**
+ * pamu_get_max_subwin_cnt() - Return the maximum supported
+ * subwindow count per liodn.
+ *
+ */
+u32 pamu_get_max_subwin_cnt()
+{
+ return max_subwindow_count;
+}
+
+/**
+ * pamu_get_ppaace() - Return the primary PACCE
+ * @liodn: liodn PAACT index for desired PAACE
+ *
+ * Returns the ppace pointer upon success else return
+ * null.
+ */
+static struct paace *pamu_get_ppaace(int liodn)
+{
+ if (!ppaact || liodn >= PAACE_NUMBER_ENTRIES) {
+ pr_err("PPAACT doesn't exist\n");
+ return NULL;
+ }
+
+ return &ppaact[liodn];
+}
+
+/**
+ * pamu_enable_liodn() - Set valid bit of PACCE
+ * @liodn: liodn PAACT index for desired PAACE
+ *
+ * Returns 0 upon success else error code < 0 returned
+ */
+int pamu_enable_liodn(int liodn)
+{
+ struct paace *ppaace;
+
+ ppaace = pamu_get_ppaace(liodn);
+ if (!ppaace) {
+ pr_err("Invalid primary paace entry\n");
+ return -ENOENT;
+ }
+
+ if (!get_bf(ppaace->addr_bitfields, PPAACE_AF_WSE)) {
+ pr_err("liodn %d not configured\n", liodn);
+ return -EINVAL;
+ }
+
+ /* Ensure that all other stores to the ppaace complete first */
+ mb();
+
+ set_bf(ppaace->addr_bitfields, PAACE_AF_V, PAACE_V_VALID);
+ mb();
+
+ return 0;
+}
+
+/**
+ * pamu_disable_liodn() - Clears valid bit of PACCE
+ * @liodn: liodn PAACT index for desired PAACE
+ *
+ * Returns 0 upon success else error code < 0 returned
+ */
+int pamu_disable_liodn(int liodn)
+{
+ struct paace *ppaace;
+
+ ppaace = pamu_get_ppaace(liodn);
+ if (!ppaace) {
+ pr_err("Invalid primary paace entry\n");
+ return -ENOENT;
+ }
+
+ set_bf(ppaace->addr_bitfields, PAACE_AF_V, PAACE_V_INVALID);
+ mb();
+
+ return 0;
+}
+
+/* Derive the window size encoding for a particular PAACE entry */
+static unsigned int map_addrspace_size_to_wse(phys_addr_t addrspace_size)
+{
+ /* Bug if not a power of 2 */
+ BUG_ON(!is_power_of_2(addrspace_size));
+
+ /* window size is 2^(WSE+1) bytes */
+ return __ffs(addrspace_size) - 1;
+}
+
+/* Derive the PAACE window count encoding for the subwindow count */
+static unsigned int map_subwindow_cnt_to_wce(u32 subwindow_cnt)
+{
+ /* window count is 2^(WCE+1) bytes */
+ return __ffs(subwindow_cnt) - 1;
+}
+
+/*
+ * Set the PAACE type as primary and set the coherency required domain
+ * attribute
+ */
+static void pamu_init_ppaace(struct paace *ppaace)
+{
+ set_bf(ppaace->addr_bitfields, PAACE_AF_PT, PAACE_PT_PRIMARY);
+
+ set_bf(ppaace->domain_attr.to_host.coherency_required, PAACE_DA_HOST_CR,
+ PAACE_M_COHERENCE_REQ);
+}
+
+/*
+ * Set the PAACE type as secondary and set the coherency required domain
+ * attribute.
+ */
+static void pamu_init_spaace(struct paace *spaace)
+{
+ set_bf(spaace->addr_bitfields, PAACE_AF_PT, PAACE_PT_SECONDARY);
+ set_bf(spaace->domain_attr.to_host.coherency_required, PAACE_DA_HOST_CR,
+ PAACE_M_COHERENCE_REQ);
+}
+
+/*
+ * Return the spaace (corresponding to the secondary window index)
+ * for a particular ppaace.
+ */
+static struct paace *pamu_get_spaace(struct paace *paace, u32 wnum)
+{
+ u32 subwin_cnt;
+ struct paace *spaace = NULL;
+
+ subwin_cnt = 1UL << (get_bf(paace->impl_attr, PAACE_IA_WCE) + 1);
+
+ if (wnum < subwin_cnt)
+ spaace = &spaact[paace->fspi + wnum];
+ else
+ pr_err("secondary paace out of bounds\n");
+
+ return spaace;
+}
+
+/**
+ * pamu_get_fspi_and_allocate() - Allocates fspi index and reserves subwindows
+ * required for primary PAACE in the secondary
+ * PAACE table.
+ * @subwin_cnt: Number of subwindows to be reserved.
+ *
+ * A PPAACE entry may have a number of associated subwindows. A subwindow
+ * corresponds to a SPAACE entry in the SPAACT table. Each PAACE entry stores
+ * the index (fspi) of the first SPAACE entry in the SPAACT table. This
+ * function returns the index of the first SPAACE entry. The remaining
+ * SPAACE entries are reserved contiguously from that index.
+ *
+ * Returns a valid fspi index in the range of 0 - SPAACE_NUMBER_ENTRIES on success.
+ * If no SPAACE entry is available or the allocator can not reserve the required
+ * number of contiguous entries function returns ULONG_MAX indicating a failure.
+ *
+*/
+static unsigned long pamu_get_fspi_and_allocate(u32 subwin_cnt)
+{
+ unsigned long spaace_addr;
+
+ spaace_addr = gen_pool_alloc(spaace_pool, subwin_cnt * sizeof(struct paace));
+ if (!spaace_addr)
+ return ULONG_MAX;
+
+ return (spaace_addr - (unsigned long)spaact) / (sizeof(struct paace));
+}
+
+/* Release the subwindows reserved for a particular LIODN */
+void pamu_free_subwins(int liodn)
+{
+ struct paace *ppaace;
+ u32 subwin_cnt, size;
+
+ ppaace = pamu_get_ppaace(liodn);
+ if (!ppaace) {
+ pr_err("Invalid liodn entry\n");
+ return;
+ }
+
+ if (get_bf(ppaace->addr_bitfields, PPAACE_AF_MW)) {
+ subwin_cnt = 1UL << (get_bf(ppaace->impl_attr, PAACE_IA_WCE) + 1);
+ size = (subwin_cnt - 1) * sizeof(struct paace);
+ gen_pool_free(spaace_pool, (unsigned long)&spaact[ppaace->fspi], size);
+ set_bf(ppaace->addr_bitfields, PPAACE_AF_MW, 0);
+ }
+}
+
+/*
+ * Function used for updating stash destination for the coressponding
+ * LIODN.
+ */
+int pamu_update_paace_stash(int liodn, u32 subwin, u32 value)
+{
+ struct paace *paace;
+
+ paace = pamu_get_ppaace(liodn);
+ if (!paace) {
+ pr_err("Invalid liodn entry\n");
+ return -ENOENT;
+ }
+ if (subwin) {
+ paace = pamu_get_spaace(paace, subwin - 1);
+ if (!paace) {
+ return -ENOENT;
+ }
+ }
+ set_bf(paace->impl_attr, PAACE_IA_CID, value);
+
+ mb();
+
+ return 0;
+}
+
+/* Disable a subwindow corresponding to the LIODN */
+int pamu_disable_spaace(int liodn, u32 subwin)
+{
+ struct paace *paace;
+
+ paace = pamu_get_ppaace(liodn);
+ if (!paace) {
+ pr_err("Invalid liodn entry\n");
+ return -ENOENT;
+ }
+ if (subwin) {
+ paace = pamu_get_spaace(paace, subwin - 1);
+ if (!paace) {
+ return -ENOENT;
+ }
+ set_bf(paace->addr_bitfields, PAACE_AF_V,
+ PAACE_V_INVALID);
+ } else {
+ set_bf(paace->addr_bitfields, PAACE_AF_AP,
+ PAACE_AP_PERMS_DENIED);
+ }
+
+ mb();
+
+ return 0;
+}
+
+
+/**
+ * pamu_config_paace() - Sets up PPAACE entry for specified liodn
+ *
+ * @liodn: Logical IO device number
+ * @win_addr: starting address of DSA window
+ * @win-size: size of DSA window
+ * @omi: Operation mapping index -- if ~omi == 0 then omi not defined
+ * @rpn: real (true physical) page number
+ * @stashid: cache stash id for associated cpu -- if ~stashid == 0 then
+ * stashid not defined
+ * @snoopid: snoop id for hardware coherency -- if ~snoopid == 0 then
+ * snoopid not defined
+ * @subwin_cnt: number of sub-windows
+ * @prot: window permissions
+ *
+ * Returns 0 upon success else error code < 0 returned
+ */
+int pamu_config_ppaace(int liodn, phys_addr_t win_addr, phys_addr_t win_size,
+ u32 omi, unsigned long rpn, u32 snoopid, u32 stashid,
+ u32 subwin_cnt, int prot)
+{
+ struct paace *ppaace;
+ unsigned long fspi;
+
+ if (!is_power_of_2(win_size) || win_size < PAMU_PAGE_SIZE) {
+ pr_err("window size too small or not a power of two %llx\n", win_size);
+ return -EINVAL;
+ }
+
+ if (win_addr & (win_size - 1)) {
+ pr_err("window address is not aligned with window size\n");
+ return -EINVAL;
+ }
+
+ ppaace = pamu_get_ppaace(liodn);
+ if (!ppaace) {
+ return -ENOENT;
+ }
+
+ /* window size is 2^(WSE+1) bytes */
+ set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE,
+ map_addrspace_size_to_wse(win_size));
+
+ pamu_init_ppaace(ppaace);
+
+ ppaace->wbah = win_addr >> (PAMU_PAGE_SHIFT + 20);
+ set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL,
+ (win_addr >> PAMU_PAGE_SHIFT));
+
+ /* set up operation mapping if it's configured */
+ if (omi < OME_NUMBER_ENTRIES) {
+ set_bf(ppaace->impl_attr, PAACE_IA_OTM, PAACE_OTM_INDEXED);
+ ppaace->op_encode.index_ot.omi = omi;
+ } else if (~omi != 0) {
+ pr_err("bad operation mapping index: %d\n", omi);
+ return -EINVAL;
+ }
+
+ /* configure stash id */
+ if (~stashid != 0)
+ set_bf(ppaace->impl_attr, PAACE_IA_CID, stashid);
+
+ /* configure snoop id */
+ if (~snoopid != 0)
+ ppaace->domain_attr.to_host.snpid = snoopid;
+
+ if (subwin_cnt) {
+ /* The first entry is in the primary PAACE instead */
+ fspi = pamu_get_fspi_and_allocate(subwin_cnt - 1);
+ if (fspi == ULONG_MAX) {
+ pr_err("spaace indexes exhausted\n");
+ return -EINVAL;
+ }
+
+ /* window count is 2^(WCE+1) bytes */
+ set_bf(ppaace->impl_attr, PAACE_IA_WCE,
+ map_subwindow_cnt_to_wce(subwin_cnt));
+ set_bf(ppaace->addr_bitfields, PPAACE_AF_MW, 0x1);
+ ppaace->fspi = fspi;
+ } else {
+ set_bf(ppaace->impl_attr, PAACE_IA_ATM, PAACE_ATM_WINDOW_XLATE);
+ ppaace->twbah = rpn >> 20;
+ set_bf(ppaace->win_bitfields, PAACE_WIN_TWBAL, rpn);
+ set_bf(ppaace->addr_bitfields, PAACE_AF_AP, prot);
+ set_bf(ppaace->impl_attr, PAACE_IA_WCE, 0);
+ set_bf(ppaace->addr_bitfields, PPAACE_AF_MW, 0);
+ }
+ mb();
+
+ return 0;
+}
+
+/**
+ * pamu_config_spaace() - Sets up SPAACE entry for specified subwindow
+ *
+ * @liodn: Logical IO device number
+ * @subwin_cnt: number of sub-windows associated with dma-window
+ * @subwin: subwindow index
+ * @subwin_size: size of subwindow
+ * @omi: Operation mapping index
+ * @rpn: real (true physical) page number
+ * @snoopid: snoop id for hardware coherency -- if ~snoopid == 0 then
+ * snoopid not defined
+ * @stashid: cache stash id for associated cpu
+ * @enable: enable/disable subwindow after reconfiguration
+ * @prot: sub window permissions
+ *
+ * Returns 0 upon success else error code < 0 returned
+ */
+int pamu_config_spaace(int liodn, u32 subwin_cnt, u32 subwin,
+ phys_addr_t subwin_size, u32 omi, unsigned long rpn,
+ u32 snoopid, u32 stashid, int enable, int prot)
+{
+ struct paace *paace;
+
+
+ /* setup sub-windows */
+ if (!subwin_cnt) {
+ pr_err("Invalid subwindow count\n");
+ return -EINVAL;
+ }
+
+ paace = pamu_get_ppaace(liodn);
+ if (subwin > 0 && subwin < subwin_cnt && paace) {
+ paace = pamu_get_spaace(paace, subwin - 1);
+
+ if (paace && !(paace->addr_bitfields & PAACE_V_VALID)) {
+ pamu_init_spaace(paace);
+ set_bf(paace->addr_bitfields, SPAACE_AF_LIODN, liodn);
+ }
+ }
+
+ if (!paace) {
+ pr_err("Invalid liodn entry\n");
+ return -ENOENT;
+ }
+
+ if (!is_power_of_2(subwin_size) || subwin_size < PAMU_PAGE_SIZE) {
+ pr_err("subwindow size out of range, or not a power of 2\n");
+ return -EINVAL;
+ }
+
+ if (rpn == ULONG_MAX) {
+ pr_err("real page number out of range\n");
+ return -EINVAL;
+ }
+
+ /* window size is 2^(WSE+1) bytes */
+ set_bf(paace->win_bitfields, PAACE_WIN_SWSE,
+ map_addrspace_size_to_wse(subwin_size));
+
+ set_bf(paace->impl_attr, PAACE_IA_ATM, PAACE_ATM_WINDOW_XLATE);
+ paace->twbah = rpn >> 20;
+ set_bf(paace->win_bitfields, PAACE_WIN_TWBAL, rpn);
+ set_bf(paace->addr_bitfields, PAACE_AF_AP, prot);
+
+ /* configure snoop id */
+ if (~snoopid != 0)
+ paace->domain_attr.to_host.snpid = snoopid;
+
+ /* set up operation mapping if it's configured */
+ if (omi < OME_NUMBER_ENTRIES) {
+ set_bf(paace->impl_attr, PAACE_IA_OTM, PAACE_OTM_INDEXED);
+ paace->op_encode.index_ot.omi = omi;
+ } else if (~omi != 0) {
+ pr_err("bad operation mapping index: %d\n", omi);
+ return -EINVAL;
+ }
+
+ if (~stashid != 0)
+ set_bf(paace->impl_attr, PAACE_IA_CID, stashid);
+
+ smp_wmb();
+
+ if (enable)
+ set_bf(paace->addr_bitfields, PAACE_AF_V, PAACE_V_VALID);
+
+ mb();
+
+ return 0;
+}
+
+/**
+* get_ome_index() - Returns the index in the operation mapping table
+* for device.
+* @*omi_index: pointer for storing the index value
+*
+*/
+void get_ome_index(u32 *omi_index, struct device *dev)
+{
+ if (of_device_is_compatible(dev->of_node, "fsl,qman-portal"))
+ *omi_index = OMI_QMAN;
+ if (of_device_is_compatible(dev->of_node, "fsl,qman"))
+ *omi_index = OMI_QMAN_PRIV;
+}
+
+/**
+ * get_stash_id - Returns stash destination id corresponding to a
+ * cache type and vcpu.
+ * @stash_dest_hint: L1, L2 or L3
+ * @vcpu: vpcu target for a particular cache type.
+ *
+ * Returs stash on success or ~(u32)0 on failure.
+ *
+ */
+u32 get_stash_id(u32 stash_dest_hint, u32 vcpu)
+{
+ const u32 *prop;
+ struct device_node *node;
+ u32 cache_level;
+ int len, found = 0;
+ int i;
+
+ /* Fastpath, exit early if L3/CPC cache is target for stashing */
+ if (stash_dest_hint == PAMU_ATTR_CACHE_L3) {
+ node = of_find_matching_node(NULL, l3_device_ids);
+ if (node) {
+ prop = of_get_property(node, "cache-stash-id", 0);
+ if (!prop) {
+ pr_err("missing cache-stash-id at %s\n", node->full_name);
+ of_node_put(node);
+ return ~(u32)0;
+ }
+ of_node_put(node);
+ return be32_to_cpup(prop);
+ }
+ return ~(u32)0;
+ }
+
+ for_each_node_by_type(node, "cpu") {
+ prop = of_get_property(node, "reg", &len);
+ for (i = 0; i < len / sizeof(u32); i++) {
+ if (be32_to_cpup(&prop[i]) == vcpu) {
+ found = 1;
+ goto found_cpu_node;
+ }
+ }
+ }
+found_cpu_node:
+
+ /* find the hwnode that represents the cache */
+ for (cache_level = PAMU_ATTR_CACHE_L1; (cache_level < PAMU_ATTR_CACHE_L3) && found; cache_level++) {
+ if (stash_dest_hint == cache_level) {
+ prop = of_get_property(node, "cache-stash-id", 0);
+ if (!prop) {
+ pr_err("missing cache-stash-id at %s\n", node->full_name);
+ of_node_put(node);
+ return ~(u32)0;
+ }
+ of_node_put(node);
+ return be32_to_cpup(prop);
+ }
+
+ prop = of_get_property(node, "next-level-cache", 0);
+ if (!prop) {
+ pr_err("can't find next-level-cache at %s\n",
+ node->full_name);
+ of_node_put(node);
+ return ~(u32)0; /* can't traverse any further */
+ }
+ of_node_put(node);
+
+ /* advance to next node in cache hierarchy */
+ node = of_find_node_by_phandle(*prop);
+ if (!node) {
+ pr_err("Invalid node for cache hierarchy %s\n",
+ node->full_name);
+ return ~(u32)0;
+ }
+ }
+
+ pr_err("stash dest not found for %d on vcpu %d\n",
+ stash_dest_hint, vcpu);
+ return ~(u32)0;
+}
+
+/* Identify if the PAACT table entry belongs to QMAN, BMAN or QMAN Portal */
+#define QMAN_PAACE 1
+#define QMAN_PORTAL_PAACE 2
+#define BMAN_PAACE 3
+
+/**
+ * Setup operation mapping and stash destinations for QMAN and QMAN portal.
+ * Memory accesses to QMAN and BMAN private memory need not be coherent, so
+ * clear the PAACE entry coherency attribute for them.
+ */
+static void setup_qbman_paace(struct paace *ppaace, int paace_type)
+{
+ switch (paace_type) {
+ case QMAN_PAACE:
+ set_bf(ppaace->impl_attr, PAACE_IA_OTM, PAACE_OTM_INDEXED);
+ ppaace->op_encode.index_ot.omi = OMI_QMAN_PRIV;
+ /* setup QMAN Private data stashing for the L3 cache */
+ set_bf(ppaace->impl_attr, PAACE_IA_CID, get_stash_id(PAMU_ATTR_CACHE_L3, 0));
+ set_bf(ppaace->domain_attr.to_host.coherency_required, PAACE_DA_HOST_CR,
+ 0);
+ break;
+ case QMAN_PORTAL_PAACE:
+ set_bf(ppaace->impl_attr, PAACE_IA_OTM, PAACE_OTM_INDEXED);
+ ppaace->op_encode.index_ot.omi = OMI_QMAN;
+ /*Set DQRR and Frame stashing for the L3 cache */
+ set_bf(ppaace->impl_attr, PAACE_IA_CID, get_stash_id(PAMU_ATTR_CACHE_L3, 0));
+ break;
+ case BMAN_PAACE:
+ set_bf(ppaace->domain_attr.to_host.coherency_required, PAACE_DA_HOST_CR,
+ 0);
+ break;
+ }
+}
+
+/**
+ * Setup the operation mapping table for various devices. This is a static
+ * table where each table index corresponds to a particular device. PAMU uses
+ * this table to translate device transaction to appropriate corenet
+ * transaction.
+ */
+static void __init setup_omt(struct ome *omt)
+{
+ struct ome *ome;
+
+ /* Configure OMI_QMAN */
+ ome = &omt[OMI_QMAN];
+
+ ome->moe[IOE_READ_IDX] = EOE_VALID | EOE_READ;
+ ome->moe[IOE_EREAD0_IDX] = EOE_VALID | EOE_RSA;
+ ome->moe[IOE_WRITE_IDX] = EOE_VALID | EOE_WRITE;
+ ome->moe[IOE_EWRITE0_IDX] = EOE_VALID | EOE_WWSAO;
+
+ ome->moe[IOE_DIRECT0_IDX] = EOE_VALID | EOE_LDEC;
+ ome->moe[IOE_DIRECT1_IDX] = EOE_VALID | EOE_LDECPE;
+
+ /* Configure OMI_FMAN */
+ ome = &omt[OMI_FMAN];
+ ome->moe[IOE_READ_IDX] = EOE_VALID | EOE_READI;
+ ome->moe[IOE_WRITE_IDX] = EOE_VALID | EOE_WRITE;
+
+ /* Configure OMI_QMAN private */
+ ome = &omt[OMI_QMAN_PRIV];
+ ome->moe[IOE_READ_IDX] = EOE_VALID | EOE_READ;
+ ome->moe[IOE_WRITE_IDX] = EOE_VALID | EOE_WRITE;
+ ome->moe[IOE_EREAD0_IDX] = EOE_VALID | EOE_RSA;
+ ome->moe[IOE_EWRITE0_IDX] = EOE_VALID | EOE_WWSA;
+
+ /* Configure OMI_CAAM */
+ ome = &omt[OMI_CAAM];
+ ome->moe[IOE_READ_IDX] = EOE_VALID | EOE_READI;
+ ome->moe[IOE_WRITE_IDX] = EOE_VALID | EOE_WRITE;
+}
+
+/*
+ * Get the maximum number of PAACT table entries
+ * and subwindows supported by PAMU
+ */
+static void get_pamu_cap_values(unsigned long pamu_reg_base)
+{
+ u32 pc_val;
+
+ pc_val = in_be32((u32 *)(pamu_reg_base + PAMU_PC3));
+ /* Maximum number of subwindows per liodn */
+ max_subwindow_count = 1 << (1 + PAMU_PC3_MWCE(pc_val));
+}
+
+/* Setup PAMU registers pointing to PAACT, SPAACT and OMT */
+int setup_one_pamu(unsigned long pamu_reg_base, unsigned long pamu_reg_size,
+ phys_addr_t ppaact_phys, phys_addr_t spaact_phys,
+ phys_addr_t omt_phys)
+{
+ u32 *pc;
+ struct pamu_mmap_regs *pamu_regs;
+
+ pc = (u32 *) (pamu_reg_base + PAMU_PC);
+ pamu_regs = (struct pamu_mmap_regs *)
+ (pamu_reg_base + PAMU_MMAP_REGS_BASE);
+
+ /* set up pointers to corenet control blocks */
+
+ out_be32(&pamu_regs->ppbah, upper_32_bits(ppaact_phys));
+ out_be32(&pamu_regs->ppbal, lower_32_bits(ppaact_phys));
+ ppaact_phys = ppaact_phys + PAACT_SIZE;
+ out_be32(&pamu_regs->pplah, upper_32_bits(ppaact_phys));
+ out_be32(&pamu_regs->pplal, lower_32_bits(ppaact_phys));
+
+ out_be32(&pamu_regs->spbah, upper_32_bits(spaact_phys));
+ out_be32(&pamu_regs->spbal, lower_32_bits(spaact_phys));
+ spaact_phys = spaact_phys + SPAACT_SIZE;
+ out_be32(&pamu_regs->splah, upper_32_bits(spaact_phys));
+ out_be32(&pamu_regs->splal, lower_32_bits(spaact_phys));
+
+ out_be32(&pamu_regs->obah, upper_32_bits(omt_phys));
+ out_be32(&pamu_regs->obal, lower_32_bits(omt_phys));
+ omt_phys = omt_phys + OMT_SIZE;
+ out_be32(&pamu_regs->olah, upper_32_bits(omt_phys));
+ out_be32(&pamu_regs->olal, lower_32_bits(omt_phys));
+
+ /*
+ * set PAMU enable bit,
+ * allow ppaact & omt to be cached
+ * & enable PAMU access violation interrupts.
+ */
+
+ out_be32((u32 *)(pamu_reg_base + PAMU_PICS),
+ PAMU_ACCESS_VIOLATION_ENABLE);
+ out_be32(pc, PAMU_PC_PE | PAMU_PC_OCE | PAMU_PC_SPCC | PAMU_PC_PPCC);
+ return 0;
+}
+
+/* Enable all device LIODNS */
+static void __init setup_liodns(void)
+{
+ int i, len;
+ struct paace *ppaace;
+ struct device_node *node = NULL;
+ const u32 *prop;
+
+ for_each_node_with_property(node, "fsl,liodn") {
+ prop = of_get_property(node, "fsl,liodn", &len);
+ for (i = 0; i < len / sizeof(u32); i++) {
+ int liodn;
+
+ liodn = be32_to_cpup(&prop[i]);
+ if (liodn >= PAACE_NUMBER_ENTRIES) {
+ pr_err("Invalid LIODN value %d\n", liodn);
+ continue;
+ }
+ ppaace = pamu_get_ppaace(liodn);
+ pamu_init_ppaace(ppaace);
+ /* window size is 2^(WSE+1) bytes */
+ set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
+ ppaace->wbah = 0;
+ set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
+ set_bf(ppaace->impl_attr, PAACE_IA_ATM,
+ PAACE_ATM_NO_XLATE);
+ set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
+ PAACE_AP_PERMS_ALL);
+ if (of_device_is_compatible(node, "fsl,qman-portal"))
+ setup_qbman_paace(ppaace, QMAN_PORTAL_PAACE);
+ if (of_device_is_compatible(node, "fsl,qman"))
+ setup_qbman_paace(ppaace, QMAN_PAACE);
+ if (of_device_is_compatible(node, "fsl,bman"))
+ setup_qbman_paace(ppaace, BMAN_PAACE);
+ mb();
+ pamu_enable_liodn(liodn);
+ }
+ }
+}
+
+irqreturn_t pamu_av_isr(int irq, void *arg)
+{
+ struct pamu_isr_data *data = arg;
+ phys_addr_t phys;
+ unsigned int i, j, ret;
+
+ pr_emerg("fsl-pamu: access violation interrupt\n");
+
+ for (i = 0; i < data->count; i++) {
+ void __iomem *p = data->pamu_reg_base + i * PAMU_OFFSET;
+ u32 pics = in_be32(p + PAMU_PICS);
+
+ if (pics & PAMU_ACCESS_VIOLATION_STAT) {
+ u32 avs1 = in_be32(p + PAMU_AVS1);
+ struct paace *paace;
+
+ pr_emerg("POES1=%08x\n", in_be32(p + PAMU_POES1));
+ pr_emerg("POES2=%08x\n", in_be32(p + PAMU_POES2));
+ pr_emerg("AVS1=%08x\n", avs1);
+ pr_emerg("AVS2=%08x\n", in_be32(p + PAMU_AVS2));
+ pr_emerg("AVA=%016llx\n", make64(in_be32(p + PAMU_AVAH),
+ in_be32(p + PAMU_AVAL)));
+ pr_emerg("UDAD=%08x\n", in_be32(p + PAMU_UDAD));
+ pr_emerg("POEA=%016llx\n", make64(in_be32(p + PAMU_POEAH),
+ in_be32(p + PAMU_POEAL)));
+
+ phys = make64(in_be32(p + PAMU_POEAH),
+ in_be32(p + PAMU_POEAL));
+
+ /* Assume that POEA points to a PAACE */
+ if (phys) {
+ u32 *paace = phys_to_virt(phys);
+
+ /* Only the first four words are relevant */
+ for (j = 0; j < 4; j++)
+ pr_emerg("PAACE[%u]=%08x\n", j, in_be32(paace + j));
+ }
+
+ /* clear access violation condition */
+ out_be32((p + PAMU_AVS1), avs1 & PAMU_AV_MASK);
+ paace = pamu_get_ppaace(avs1 >> PAMU_AVS1_LIODN_SHIFT);
+ BUG_ON(!paace);
+ /* check if we got a violation for a disabled LIODN */
+ if (!get_bf(paace->addr_bitfields, PAACE_AF_V)) {
+ /*
+ * As per hardware erratum A-003638, access
+ * violation can be reported for a disabled
+ * LIODN. If we hit that condition, disable
+ * access violation reporting.
+ */
+ pics &= ~PAMU_ACCESS_VIOLATION_ENABLE;
+ } else {
+ /* Disable the LIODN */
+ ret = pamu_disable_liodn(avs1 >> PAMU_AVS1_LIODN_SHIFT);
+ BUG_ON(ret);
+ pr_emerg("Disabling liodn %x\n", avs1 >> PAMU_AVS1_LIODN_SHIFT);
+ }
+ out_be32((p + PAMU_PICS), pics);
+ }
+ }
+
+
+ return IRQ_HANDLED;
+}
+
+#define LAWAR_EN 0x80000000
+#define LAWAR_TARGET_MASK 0x0FF00000
+#define LAWAR_TARGET_SHIFT 20
+#define LAWAR_SIZE_MASK 0x0000003F
+#define LAWAR_CSDID_MASK 0x000FF000
+#define LAWAR_CSDID_SHIFT 12
+
+#define LAW_SIZE_4K 0xb
+
+struct ccsr_law {
+ u32 lawbarh; /* LAWn base address high */
+ u32 lawbarl; /* LAWn base address low */
+ u32 lawar; /* LAWn attributes */
+ u32 reserved;
+};
+
+/*
+ * Create a coherence subdomain for a given memory block.
+ */
+static int __init create_csd(phys_addr_t phys, size_t size, u32 csd_port_id)
+{
+ struct device_node *np;
+ const __be32 *iprop;
+ void __iomem *lac = NULL; /* Local Access Control registers */
+ struct ccsr_law __iomem *law;
+ void __iomem *ccm = NULL;
+ u32 __iomem *csdids;
+ unsigned int i, num_laws, num_csds;
+ u32 law_target = 0;
+ u32 csd_id = 0;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,corenet-law");
+ if (!np)
+ return -ENODEV;
+
+ iprop = of_get_property(np, "fsl,num-laws", NULL);
+ if (!iprop) {
+ ret = -ENODEV;
+ goto error;
+ }
+
+ num_laws = be32_to_cpup(iprop);
+ if (!num_laws) {
+ ret = -ENODEV;
+ goto error;
+ }
+
+ lac = of_iomap(np, 0);
+ if (!lac) {
+ ret = -ENODEV;
+ goto error;
+ }
+
+ /* LAW registers are at offset 0xC00 */
+ law = lac + 0xC00;
+
+ of_node_put(np);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,corenet-cf");
+ if (!np) {
+ ret = -ENODEV;
+ goto error;
+ }
+
+ iprop = of_get_property(np, "fsl,ccf-num-csdids", NULL);
+ if (!iprop) {
+ ret = -ENODEV;
+ goto error;
+ }
+
+ num_csds = be32_to_cpup(iprop);
+ if (!num_csds) {
+ ret = -ENODEV;
+ goto error;
+ }
+
+ ccm = of_iomap(np, 0);
+ if (!ccm) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ /* The undocumented CSDID registers are at offset 0x600 */
+ csdids = ccm + 0x600;
+
+ of_node_put(np);
+ np = NULL;
+
+ /* Find an unused coherence subdomain ID */
+ for (csd_id = 0; csd_id < num_csds; csd_id++) {
+ if (!csdids[csd_id])
+ break;
+ }
+
+ /* Store the Port ID in the (undocumented) proper CIDMRxx register */
+ csdids[csd_id] = csd_port_id;
+
+ /* Find the DDR LAW that maps to our buffer. */
+ for (i = 0; i < num_laws; i++) {
+ if (law[i].lawar & LAWAR_EN) {
+ phys_addr_t law_start, law_end;
+
+ law_start = make64(law[i].lawbarh, law[i].lawbarl);
+ law_end = law_start +
+ (2ULL << (law[i].lawar & LAWAR_SIZE_MASK));
+
+ if (law_start <= phys && phys < law_end) {
+ law_target = law[i].lawar & LAWAR_TARGET_MASK;
+ break;
+ }
+ }
+ }
+
+ if (i == 0 || i == num_laws) {
+ /* This should never happen*/
+ ret = -ENOENT;
+ goto error;
+ }
+
+ /* Find a free LAW entry */
+ while (law[--i].lawar & LAWAR_EN) {
+ if (i == 0) {
+ /* No higher priority LAW slots available */
+ ret = -ENOENT;
+ goto error;
+ }
+ }
+
+ law[i].lawbarh = upper_32_bits(phys);
+ law[i].lawbarl = lower_32_bits(phys);
+ wmb();
+ law[i].lawar = LAWAR_EN | law_target | (csd_id << LAWAR_CSDID_SHIFT) |
+ (LAW_SIZE_4K + get_order(size));
+ wmb();
+
+error:
+ if (ccm)
+ iounmap(ccm);
+
+ if (lac)
+ iounmap(lac);
+
+ if (np)
+ of_node_put(np);
+
+ return ret;
+}
+
+/*
+ * Table of SVRs and the corresponding PORT_ID values. Port ID corresponds to a
+ * bit map of snoopers for a given range of memory mapped by a LAW.
+ *
+ * All future CoreNet-enabled SOCs will have this erratum(A-004510) fixed, so this
+ * table should never need to be updated. SVRs are guaranteed to be unique, so
+ * there is no worry that a future SOC will inadvertently have one of these
+ * values.
+ */
+static const struct {
+ u32 svr;
+ u32 port_id;
+} port_id_map[] = {
+ {0x82100010, 0xFF000000}, /* P2040 1.0 */
+ {0x82100011, 0xFF000000}, /* P2040 1.1 */
+ {0x82100110, 0xFF000000}, /* P2041 1.0 */
+ {0x82100111, 0xFF000000}, /* P2041 1.1 */
+ {0x82110310, 0xFF000000}, /* P3041 1.0 */
+ {0x82110311, 0xFF000000}, /* P3041 1.1 */
+ {0x82010020, 0xFFF80000}, /* P4040 2.0 */
+ {0x82000020, 0xFFF80000}, /* P4080 2.0 */
+ {0x82210010, 0xFC000000}, /* P5010 1.0 */
+ {0x82210020, 0xFC000000}, /* P5010 2.0 */
+ {0x82200010, 0xFC000000}, /* P5020 1.0 */
+ {0x82050010, 0xFF800000}, /* P5021 1.0 */
+ {0x82040010, 0xFF800000}, /* P5040 1.0 */
+};
+
+#define SVR_SECURITY 0x80000 /* The Security (E) bit */
+
+static int __init fsl_pamu_probe(struct platform_device *pdev)
+{
+ void __iomem *pamu_regs = NULL;
+ struct ccsr_guts __iomem *guts_regs = NULL;
+ u32 pamubypenr, pamu_counter;
+ unsigned long pamu_reg_off;
+ unsigned long pamu_reg_base;
+ struct pamu_isr_data *data = NULL;
+ struct device_node *guts_node;
+ u64 size;
+ struct page *p;
+ int ret = 0;
+ int irq;
+ phys_addr_t ppaact_phys;
+ phys_addr_t spaact_phys;
+ phys_addr_t omt_phys;
+ size_t mem_size = 0;
+ unsigned int order = 0;
+ u32 csd_port_id = 0;
+ unsigned i;
+ /*
+ * enumerate all PAMUs and allocate and setup PAMU tables
+ * for each of them,
+ * NOTE : All PAMUs share the same LIODN tables.
+ */
+
+ pamu_regs = of_iomap(pdev->dev.of_node, 0);
+ if (!pamu_regs) {
+ dev_err(&pdev->dev, "ioremap of PAMU node failed\n");
+ return -ENOMEM;
+ }
+ of_get_address(pdev->dev.of_node, 0, &size, NULL);
+
+ irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ if (irq == NO_IRQ) {
+ dev_warn(&pdev->dev, "no interrupts listed in PAMU node\n");
+ goto error;
+ }
+
+ data = kzalloc(sizeof(struct pamu_isr_data), GFP_KERNEL);
+ if (!data) {
+ dev_err(&pdev->dev, "PAMU isr data memory allocation failed\n");
+ ret = -ENOMEM;
+ goto error;
+ }
+ data->pamu_reg_base = pamu_regs;
+ data->count = size / PAMU_OFFSET;
+
+ /* The ISR needs access to the regs, so we won't iounmap them */
+ ret = request_irq(irq, pamu_av_isr, 0, "pamu", data);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "error %i installing ISR for irq %i\n",
+ ret, irq);
+ goto error;
+ }
+
+ guts_node = of_find_matching_node(NULL, guts_device_ids);
+ if (!guts_node) {
+ dev_err(&pdev->dev, "could not find GUTS node %s\n",
+ pdev->dev.of_node->full_name);
+ ret = -ENODEV;
+ goto error;
+ }
+
+ guts_regs = of_iomap(guts_node, 0);
+ of_node_put(guts_node);
+ if (!guts_regs) {
+ dev_err(&pdev->dev, "ioremap of GUTS node failed\n");
+ ret = -ENODEV;
+ goto error;
+ }
+
+ /* read in the PAMU capability registers */
+ get_pamu_cap_values((unsigned long)pamu_regs);
+ /*
+ * To simplify the allocation of a coherency domain, we allocate the
+ * PAACT and the OMT in the same memory buffer. Unfortunately, this
+ * wastes more memory compared to allocating the buffers separately.
+ */
+ /* Determine how much memory we need */
+ mem_size = (PAGE_SIZE << get_order(PAACT_SIZE)) +
+ (PAGE_SIZE << get_order(SPAACT_SIZE)) +
+ (PAGE_SIZE << get_order(OMT_SIZE));
+ order = get_order(mem_size);
+
+ p = alloc_pages(GFP_KERNEL | __GFP_ZERO, order);
+ if (!p) {
+ dev_err(&pdev->dev, "unable to allocate PAACT/SPAACT/OMT block\n");
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ ppaact = page_address(p);
+ ppaact_phys = page_to_phys(p);
+
+ /* Make sure the memory is naturally aligned */
+ if (ppaact_phys & ((PAGE_SIZE << order) - 1)) {
+ dev_err(&pdev->dev, "PAACT/OMT block is unaligned\n");
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ spaact = (void *)ppaact + (PAGE_SIZE << get_order(PAACT_SIZE));
+ omt = (void *)spaact + (PAGE_SIZE << get_order(SPAACT_SIZE));
+
+ dev_dbg(&pdev->dev, "ppaact virt=%p phys=0x%llx\n", ppaact,
+ (unsigned long long) ppaact_phys);
+
+ /* Check to see if we need to implement the work-around on this SOC */
+
+ /* Determine the Port ID for our coherence subdomain */
+ for (i = 0; i < ARRAY_SIZE(port_id_map); i++) {
+ if (port_id_map[i].svr == (mfspr(SPRN_SVR) & ~SVR_SECURITY)) {
+ csd_port_id = port_id_map[i].port_id;
+ dev_dbg(&pdev->dev, "found matching SVR %08x\n",
+ port_id_map[i].svr);
+ break;
+ }
+ }
+
+ if (csd_port_id) {
+ dev_dbg(&pdev->dev, "creating coherency subdomain at address "
+ "0x%llx, size %zu, port id 0x%08x", ppaact_phys,
+ mem_size, csd_port_id);
+
+ ret = create_csd(ppaact_phys, mem_size, csd_port_id);
+ if (ret) {
+ dev_err(&pdev->dev, "could not create coherence "
+ "subdomain\n");
+ return ret;
+ }
+ }
+
+ spaact_phys = virt_to_phys(spaact);
+ omt_phys = virt_to_phys(omt);
+
+ spaace_pool = gen_pool_create(ilog2(sizeof(struct paace)), -1);
+ if (!spaace_pool) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "PAMU : failed to allocate spaace gen pool\n");
+ goto error;
+ }
+
+ ret = gen_pool_add(spaace_pool, (unsigned long)spaact, SPAACT_SIZE, -1);
+ if (ret)
+ goto error_genpool;
+
+ pamubypenr = in_be32(&guts_regs->pamubypenr);
+
+ for (pamu_reg_off = 0, pamu_counter = 0x80000000; pamu_reg_off < size;
+ pamu_reg_off += PAMU_OFFSET, pamu_counter >>= 1) {
+
+ pamu_reg_base = (unsigned long) pamu_regs + pamu_reg_off;
+ setup_one_pamu(pamu_reg_base, pamu_reg_off, ppaact_phys,
+ spaact_phys, omt_phys);
+ /* Disable PAMU bypass for this PAMU */
+ pamubypenr &= ~pamu_counter;
+ }
+
+ setup_omt(omt);
+
+ /* Enable all relevant PAMU(s) */
+ out_be32(&guts_regs->pamubypenr, pamubypenr);
+
+ iounmap(guts_regs);
+
+ /* Enable DMA for the LIODNs in the device tree*/
+
+ setup_liodns();
+
+ return 0;
+
+error_genpool:
+ gen_pool_destroy(spaace_pool);
+
+error:
+ if (irq != NO_IRQ)
+ free_irq(irq, data);
+
+ if (data) {
+ memset(data, 0, sizeof(struct pamu_isr_data));
+ kfree(data);
+ }
+
+ if (pamu_regs)
+ iounmap(pamu_regs);
+
+ if (guts_regs)
+ iounmap(guts_regs);
+
+ if (ppaact)
+ free_pages((unsigned long)ppaact, order);
+
+ ppaact = NULL;
+
+ return ret;
+}
+
+static const struct of_device_id fsl_of_pamu_ids[] = {
+ {
+ .compatible = "fsl,p4080-pamu",
+ },
+ {
+ .compatible = "fsl,pamu",
+ },
+ {},
+};
+
+static struct platform_driver fsl_of_pamu_driver = {
+ .driver = {
+ .name = "fsl-of-pamu",
+ .owner = THIS_MODULE,
+ },
+ .probe = fsl_pamu_probe,
+};
+
+static __init int fsl_pamu_init(void)
+{
+ struct platform_device *pdev = NULL;
+ struct device_node *np;
+ int ret;
+
+ /*
+ * The normal OF process calls the probe function at some
+ * indeterminate later time, after most drivers have loaded. This is
+ * too late for us, because PAMU clients (like the Qman driver)
+ * depend on PAMU being initialized early.
+ *
+ * So instead, we "manually" call our probe function by creating the
+ * platform devices ourselves.
+ */
+
+ /*
+ * We assume that there is only one PAMU node in the device tree. A
+ * single PAMU node represents all of the PAMU devices in the SOC
+ * already. Everything else already makes that assumption, and the
+ * binding for the PAMU nodes doesn't allow for any parent-child
+ * relationships anyway. In other words, support for more than one
+ * PAMU node would require significant changes to a lot of code.
+ */
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,pamu");
+ if (!np) {
+ pr_err("fsl-pamu: could not find a PAMU node\n");
+ return -ENODEV;
+ }
+
+ ret = platform_driver_register(&fsl_of_pamu_driver);
+ if (ret) {
+ pr_err("fsl-pamu: could not register driver (err=%i)\n", ret);
+ goto error_driver_register;
+ }
+
+ pdev = platform_device_alloc("fsl-of-pamu", 0);
+ if (!pdev) {
+ pr_err("fsl-pamu: could not allocate device %s\n",
+ np->full_name);
+ ret = -ENOMEM;
+ goto error_device_alloc;
+ }
+ pdev->dev.of_node = of_node_get(np);
+
+ ret = pamu_domain_init();
+ if (ret)
+ goto error_device_add;
+
+ ret = platform_device_add(pdev);
+ if (ret) {
+ pr_err("fsl-pamu: could not add device %s (err=%i)\n",
+ np->full_name, ret);
+ goto error_device_add;
+ }
+
+ return 0;
+
+error_device_add:
+ of_node_put(pdev->dev.of_node);
+ pdev->dev.of_node = NULL;
+
+ platform_device_put(pdev);
+
+error_device_alloc:
+ platform_driver_unregister(&fsl_of_pamu_driver);
+
+error_driver_register:
+ of_node_put(np);
+
+ return ret;
+}
+arch_initcall(fsl_pamu_init);
diff --git a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h
new file mode 100644
index 0000000..8fc1a12
--- /dev/null
+++ b/drivers/iommu/fsl_pamu.h
@@ -0,0 +1,410 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ */
+
+#ifndef __FSL_PAMU_H
+#define __FSL_PAMU_H
+
+#include <asm/fsl_pamu_stash.h>
+
+/* Bit Field macros
+ * v = bit field variable; m = mask, m##_SHIFT = shift, x = value to load
+ */
+#define set_bf(v, m, x) (v = ((v) & ~(m)) | (((x) << (m##_SHIFT)) & (m)))
+#define get_bf(v, m) (((v) & (m)) >> (m##_SHIFT))
+
+/* PAMU CCSR space */
+#define PAMU_PGC 0x00000000 /* Allows all peripheral accesses */
+#define PAMU_PE 0x40000000 /* enable PAMU */
+
+/* PAMU_OFFSET to the next pamu space in ccsr */
+#define PAMU_OFFSET 0x1000
+
+#define PAMU_MMAP_REGS_BASE 0
+
+struct pamu_mmap_regs {
+ u32 ppbah;
+ u32 ppbal;
+ u32 pplah;
+ u32 pplal;
+ u32 spbah;
+ u32 spbal;
+ u32 splah;
+ u32 splal;
+ u32 obah;
+ u32 obal;
+ u32 olah;
+ u32 olal;
+};
+
+/* PAMU Error Registers */
+#define PAMU_POES1 0x0040
+#define PAMU_POES2 0x0044
+#define PAMU_POEAH 0x0048
+#define PAMU_POEAL 0x004C
+#define PAMU_AVS1 0x0050
+#define PAMU_AVS1_AV 0x1
+#define PAMU_AVS1_OTV 0x6
+#define PAMU_AVS1_APV 0x78
+#define PAMU_AVS1_WAV 0x380
+#define PAMU_AVS1_LAV 0x1c00
+#define PAMU_AVS1_GCV 0x2000
+#define PAMU_AVS1_PDV 0x4000
+#define PAMU_AV_MASK (PAMU_AVS1_AV | PAMU_AVS1_OTV | PAMU_AVS1_APV | PAMU_AVS1_WAV \
+ | PAMU_AVS1_LAV | PAMU_AVS1_GCV | PAMU_AVS1_PDV)
+#define PAMU_AVS1_LIODN_SHIFT 16
+#define PAMU_LAV_LIODN_NOT_IN_PPAACT 0x400
+
+#define PAMU_AVS2 0x0054
+#define PAMU_AVAH 0x0058
+#define PAMU_AVAL 0x005C
+#define PAMU_EECTL 0x0060
+#define PAMU_EEDIS 0x0064
+#define PAMU_EEINTEN 0x0068
+#define PAMU_EEDET 0x006C
+#define PAMU_EEATTR 0x0070
+#define PAMU_EEAHI 0x0074
+#define PAMU_EEALO 0x0078
+#define PAMU_EEDHI 0X007C
+#define PAMU_EEDLO 0x0080
+#define PAMU_EECC 0x0084
+#define PAMU_UDAD 0x0090
+
+/* PAMU Revision Registers */
+#define PAMU_PR1 0x0BF8
+#define PAMU_PR2 0x0BFC
+
+/* PAMU version mask */
+#define PAMU_PR1_MASK 0xffff
+
+/* PAMU Capabilities Registers */
+#define PAMU_PC1 0x0C00
+#define PAMU_PC2 0x0C04
+#define PAMU_PC3 0x0C08
+#define PAMU_PC4 0x0C0C
+
+/* PAMU Control Register */
+#define PAMU_PC 0x0C10
+
+/* PAMU control defs */
+#define PAMU_CONTROL 0x0C10
+#define PAMU_PC_PGC 0x80000000 /* PAMU gate closed bit */
+#define PAMU_PC_PE 0x40000000 /* PAMU enable bit */
+#define PAMU_PC_SPCC 0x00000010 /* sPAACE cache enable */
+#define PAMU_PC_PPCC 0x00000001 /* pPAACE cache enable */
+#define PAMU_PC_OCE 0x00001000 /* OMT cache enable */
+
+#define PAMU_PFA1 0x0C14
+#define PAMU_PFA2 0x0C18
+
+#define PAMU_PC2_MLIODN(X) ((X) >> 16)
+#define PAMU_PC3_MWCE(X) (((X) >> 21) & 0xf)
+
+/* PAMU Interrupt control and Status Register */
+#define PAMU_PICS 0x0C1C
+#define PAMU_ACCESS_VIOLATION_STAT 0x8
+#define PAMU_ACCESS_VIOLATION_ENABLE 0x4
+
+/* PAMU Debug Registers */
+#define PAMU_PD1 0x0F00
+#define PAMU_PD2 0x0F04
+#define PAMU_PD3 0x0F08
+#define PAMU_PD4 0x0F0C
+
+#define PAACE_AP_PERMS_DENIED 0x0
+#define PAACE_AP_PERMS_QUERY 0x1
+#define PAACE_AP_PERMS_UPDATE 0x2
+#define PAACE_AP_PERMS_ALL 0x3
+
+#define PAACE_DD_TO_HOST 0x0
+#define PAACE_DD_TO_IO 0x1
+#define PAACE_PT_PRIMARY 0x0
+#define PAACE_PT_SECONDARY 0x1
+#define PAACE_V_INVALID 0x0
+#define PAACE_V_VALID 0x1
+#define PAACE_MW_SUBWINDOWS 0x1
+
+#define PAACE_WSE_4K 0xB
+#define PAACE_WSE_8K 0xC
+#define PAACE_WSE_16K 0xD
+#define PAACE_WSE_32K 0xE
+#define PAACE_WSE_64K 0xF
+#define PAACE_WSE_128K 0x10
+#define PAACE_WSE_256K 0x11
+#define PAACE_WSE_512K 0x12
+#define PAACE_WSE_1M 0x13
+#define PAACE_WSE_2M 0x14
+#define PAACE_WSE_4M 0x15
+#define PAACE_WSE_8M 0x16
+#define PAACE_WSE_16M 0x17
+#define PAACE_WSE_32M 0x18
+#define PAACE_WSE_64M 0x19
+#define PAACE_WSE_128M 0x1A
+#define PAACE_WSE_256M 0x1B
+#define PAACE_WSE_512M 0x1C
+#define PAACE_WSE_1G 0x1D
+#define PAACE_WSE_2G 0x1E
+#define PAACE_WSE_4G 0x1F
+
+#define PAACE_DID_PCI_EXPRESS_1 0x00
+#define PAACE_DID_PCI_EXPRESS_2 0x01
+#define PAACE_DID_PCI_EXPRESS_3 0x02
+#define PAACE_DID_PCI_EXPRESS_4 0x03
+#define PAACE_DID_LOCAL_BUS 0x04
+#define PAACE_DID_SRIO 0x0C
+#define PAACE_DID_MEM_1 0x10
+#define PAACE_DID_MEM_2 0x11
+#define PAACE_DID_MEM_3 0x12
+#define PAACE_DID_MEM_4 0x13
+#define PAACE_DID_MEM_1_2 0x14
+#define PAACE_DID_MEM_3_4 0x15
+#define PAACE_DID_MEM_1_4 0x16
+#define PAACE_DID_BM_SW_PORTAL 0x18
+#define PAACE_DID_PAMU 0x1C
+#define PAACE_DID_CAAM 0x21
+#define PAACE_DID_QM_SW_PORTAL 0x3C
+#define PAACE_DID_CORE0_INST 0x80
+#define PAACE_DID_CORE0_DATA 0x81
+#define PAACE_DID_CORE1_INST 0x82
+#define PAACE_DID_CORE1_DATA 0x83
+#define PAACE_DID_CORE2_INST 0x84
+#define PAACE_DID_CORE2_DATA 0x85
+#define PAACE_DID_CORE3_INST 0x86
+#define PAACE_DID_CORE3_DATA 0x87
+#define PAACE_DID_CORE4_INST 0x88
+#define PAACE_DID_CORE4_DATA 0x89
+#define PAACE_DID_CORE5_INST 0x8A
+#define PAACE_DID_CORE5_DATA 0x8B
+#define PAACE_DID_CORE6_INST 0x8C
+#define PAACE_DID_CORE6_DATA 0x8D
+#define PAACE_DID_CORE7_INST 0x8E
+#define PAACE_DID_CORE7_DATA 0x8F
+#define PAACE_DID_BROADCAST 0xFF
+
+#define PAACE_ATM_NO_XLATE 0x00
+#define PAACE_ATM_WINDOW_XLATE 0x01
+#define PAACE_ATM_PAGE_XLATE 0x02
+#define PAACE_ATM_WIN_PG_XLATE \
+ (PAACE_ATM_WINDOW_XLATE | PAACE_ATM_PAGE_XLATE)
+#define PAACE_OTM_NO_XLATE 0x00
+#define PAACE_OTM_IMMEDIATE 0x01
+#define PAACE_OTM_INDEXED 0x02
+#define PAACE_OTM_RESERVED 0x03
+
+#define PAACE_M_COHERENCE_REQ 0x01
+
+#define PAACE_PID_0 0x0
+#define PAACE_PID_1 0x1
+#define PAACE_PID_2 0x2
+#define PAACE_PID_3 0x3
+#define PAACE_PID_4 0x4
+#define PAACE_PID_5 0x5
+#define PAACE_PID_6 0x6
+#define PAACE_PID_7 0x7
+
+#define PAACE_TCEF_FORMAT0_8B 0x00
+#define PAACE_TCEF_FORMAT1_RSVD 0x01
+/*
+ * Hard coded value for the PAACT size to accomodate
+ * maximum LIODN value generated by u-boot.
+ */
+#define PAACE_NUMBER_ENTRIES 0x500
+/* Hard coded value for the SPAACT size */
+#define SPAACE_NUMBER_ENTRIES 0x800
+
+#define OME_NUMBER_ENTRIES 16
+
+/* PAACE Bit Field Defines */
+#define PPAACE_AF_WBAL 0xfffff000
+#define PPAACE_AF_WBAL_SHIFT 12
+#define PPAACE_AF_WSE 0x00000fc0
+#define PPAACE_AF_WSE_SHIFT 6
+#define PPAACE_AF_MW 0x00000020
+#define PPAACE_AF_MW_SHIFT 5
+
+#define SPAACE_AF_LIODN 0xffff0000
+#define SPAACE_AF_LIODN_SHIFT 16
+
+#define PAACE_AF_AP 0x00000018
+#define PAACE_AF_AP_SHIFT 3
+#define PAACE_AF_DD 0x00000004
+#define PAACE_AF_DD_SHIFT 2
+#define PAACE_AF_PT 0x00000002
+#define PAACE_AF_PT_SHIFT 1
+#define PAACE_AF_V 0x00000001
+#define PAACE_AF_V_SHIFT 0
+
+#define PAACE_DA_HOST_CR 0x80
+#define PAACE_DA_HOST_CR_SHIFT 7
+
+#define PAACE_IA_CID 0x00FF0000
+#define PAACE_IA_CID_SHIFT 16
+#define PAACE_IA_WCE 0x000000F0
+#define PAACE_IA_WCE_SHIFT 4
+#define PAACE_IA_ATM 0x0000000C
+#define PAACE_IA_ATM_SHIFT 2
+#define PAACE_IA_OTM 0x00000003
+#define PAACE_IA_OTM_SHIFT 0
+
+#define PAACE_WIN_TWBAL 0xfffff000
+#define PAACE_WIN_TWBAL_SHIFT 12
+#define PAACE_WIN_SWSE 0x00000fc0
+#define PAACE_WIN_SWSE_SHIFT 6
+
+/* PAMU Data Structures */
+/* primary / secondary paact structure */
+struct paace {
+ /* PAACE Offset 0x00 */
+ u32 wbah; /* only valid for Primary PAACE */
+ u32 addr_bitfields; /* See P/S PAACE_AF_* */
+
+ /* PAACE Offset 0x08 */
+ /* Interpretation of first 32 bits dependent on DD above */
+ union {
+ struct {
+ /* Destination ID, see PAACE_DID_* defines */
+ u8 did;
+ /* Partition ID */
+ u8 pid;
+ /* Snoop ID */
+ u8 snpid;
+ /* coherency_required : 1 reserved : 7 */
+ u8 coherency_required; /* See PAACE_DA_* */
+ } to_host;
+ struct {
+ /* Destination ID, see PAACE_DID_* defines */
+ u8 did;
+ u8 reserved1;
+ u16 reserved2;
+ } to_io;
+ } domain_attr;
+
+ /* Implementation attributes + window count + address & operation translation modes */
+ u32 impl_attr; /* See PAACE_IA_* */
+
+ /* PAACE Offset 0x10 */
+ /* Translated window base address */
+ u32 twbah;
+ u32 win_bitfields; /* See PAACE_WIN_* */
+
+ /* PAACE Offset 0x18 */
+ /* first secondary paace entry */
+ u32 fspi; /* only valid for Primary PAACE */
+ union {
+ struct {
+ u8 ioea;
+ u8 moea;
+ u8 ioeb;
+ u8 moeb;
+ } immed_ot;
+ struct {
+ u16 reserved;
+ u16 omi;
+ } index_ot;
+ } op_encode;
+
+ /* PAACE Offsets 0x20-0x38 */
+ u32 reserved[8]; /* not currently implemented */
+};
+
+/* OME : Operation mapping entry
+ * MOE : Mapped Operation Encodings
+ * The operation mapping table is table containing operation mapping entries (OME).
+ * The index of a particular OME is programmed in the PAACE entry for translation
+ * in bound I/O operations corresponding to an LIODN. The OMT is used for translation
+ * specifically in case of the indexed translation mode. Each OME contains a 128
+ * byte mapped operation encoding (MOE), where each byte represents an MOE.
+ */
+#define NUM_MOE 128
+struct ome {
+ u8 moe[NUM_MOE];
+} __attribute__((packed));
+
+#define PAACT_SIZE (sizeof(struct paace) * PAACE_NUMBER_ENTRIES)
+#define SPAACT_SIZE (sizeof(struct paace) * SPAACE_NUMBER_ENTRIES)
+#define OMT_SIZE (sizeof(struct ome) * OME_NUMBER_ENTRIES)
+
+#define PAMU_PAGE_SHIFT 12
+#define PAMU_PAGE_SIZE 4096ULL
+
+#define IOE_READ 0x00
+#define IOE_READ_IDX 0x00
+#define IOE_WRITE 0x81
+#define IOE_WRITE_IDX 0x01
+#define IOE_EREAD0 0x82 /* Enhanced read type 0 */
+#define IOE_EREAD0_IDX 0x02 /* Enhanced read type 0 */
+#define IOE_EWRITE0 0x83 /* Enhanced write type 0 */
+#define IOE_EWRITE0_IDX 0x03 /* Enhanced write type 0 */
+#define IOE_DIRECT0 0x84 /* Directive type 0 */
+#define IOE_DIRECT0_IDX 0x04 /* Directive type 0 */
+#define IOE_EREAD1 0x85 /* Enhanced read type 1 */
+#define IOE_EREAD1_IDX 0x05 /* Enhanced read type 1 */
+#define IOE_EWRITE1 0x86 /* Enhanced write type 1 */
+#define IOE_EWRITE1_IDX 0x06 /* Enhanced write type 1 */
+#define IOE_DIRECT1 0x87 /* Directive type 1 */
+#define IOE_DIRECT1_IDX 0x07 /* Directive type 1 */
+#define IOE_RAC 0x8c /* Read with Atomic clear */
+#define IOE_RAC_IDX 0x0c /* Read with Atomic clear */
+#define IOE_RAS 0x8d /* Read with Atomic set */
+#define IOE_RAS_IDX 0x0d /* Read with Atomic set */
+#define IOE_RAD 0x8e /* Read with Atomic decrement */
+#define IOE_RAD_IDX 0x0e /* Read with Atomic decrement */
+#define IOE_RAI 0x8f /* Read with Atomic increment */
+#define IOE_RAI_IDX 0x0f /* Read with Atomic increment */
+
+#define EOE_READ 0x00
+#define EOE_WRITE 0x01
+#define EOE_RAC 0x0c /* Read with Atomic clear */
+#define EOE_RAS 0x0d /* Read with Atomic set */
+#define EOE_RAD 0x0e /* Read with Atomic decrement */
+#define EOE_RAI 0x0f /* Read with Atomic increment */
+#define EOE_LDEC 0x10 /* Load external cache */
+#define EOE_LDECL 0x11 /* Load external cache with stash lock */
+#define EOE_LDECPE 0x12 /* Load external cache with preferred exclusive */
+#define EOE_LDECPEL 0x13 /* Load external cache with preferred exclusive and lock */
+#define EOE_LDECFE 0x14 /* Load external cache with forced exclusive */
+#define EOE_LDECFEL 0x15 /* Load external cache with forced exclusive and lock */
+#define EOE_RSA 0x16 /* Read with stash allocate */
+#define EOE_RSAU 0x17 /* Read with stash allocate and unlock */
+#define EOE_READI 0x18 /* Read with invalidate */
+#define EOE_RWNITC 0x19 /* Read with no intention to cache */
+#define EOE_WCI 0x1a /* Write cache inhibited */
+#define EOE_WWSA 0x1b /* Write with stash allocate */
+#define EOE_WWSAL 0x1c /* Write with stash allocate and lock */
+#define EOE_WWSAO 0x1d /* Write with stash allocate only */
+#define EOE_WWSAOL 0x1e /* Write with stash allocate only and lock */
+#define EOE_VALID 0x80
+
+/* Function prototypes */
+int pamu_domain_init(void);
+int pamu_enable_liodn(int liodn);
+int pamu_disable_liodn(int liodn);
+void pamu_free_subwins(int liodn);
+int pamu_config_ppaace(int liodn, phys_addr_t win_addr, phys_addr_t win_size,
+ u32 omi, unsigned long rpn, u32 snoopid, uint32_t stashid,
+ u32 subwin_cnt, int prot);
+int pamu_config_spaace(int liodn, u32 subwin_cnt, u32 subwin_addr,
+ phys_addr_t subwin_size, u32 omi, unsigned long rpn,
+ uint32_t snoopid, u32 stashid, int enable, int prot);
+
+u32 get_stash_id(u32 stash_dest_hint, u32 vcpu);
+void get_ome_index(u32 *omi_index, struct device *dev);
+int pamu_update_paace_stash(int liodn, u32 subwin, u32 value);
+int pamu_disable_spaace(int liodn, u32 subwin);
+u32 pamu_get_max_subwin_cnt(void);
+
+#endif /* __FSL_PAMU_H */
diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c
new file mode 100644
index 0000000..d858629
--- /dev/null
+++ b/drivers/iommu/fsl_pamu_domain.c
@@ -0,0 +1,1142 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Author: Varun Sethi <varun.sethi@freescale.com>
+ *
+ */
+
+#define pr_fmt(fmt) "fsl-pamu-domain: %s: " fmt, __func__
+
+#include <linux/init.h>
+#include <linux/iommu.h>
+#include <linux/notifier.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+#include <linux/bootmem.h>
+#include <linux/err.h>
+#include <asm/io.h>
+#include <asm/bitops.h>
+
+#include <asm/pci-bridge.h>
+#include <sysdev/fsl_pci.h>
+
+#include "fsl_pamu_domain.h"
+#include "pci.h"
+
+/*
+ * Global spinlock that needs to be held while
+ * configuring PAMU.
+ */
+static DEFINE_SPINLOCK(iommu_lock);
+
+static struct kmem_cache *fsl_pamu_domain_cache;
+static struct kmem_cache *iommu_devinfo_cache;
+static DEFINE_SPINLOCK(device_domain_lock);
+
+static int __init iommu_init_mempool(void)
+{
+
+ fsl_pamu_domain_cache = kmem_cache_create("fsl_pamu_domain",
+ sizeof(struct fsl_dma_domain),
+ 0,
+ SLAB_HWCACHE_ALIGN,
+
+ NULL);
+ if (!fsl_pamu_domain_cache) {
+ pr_err("Couldn't create fsl iommu_domain cache\n");
+ return -ENOMEM;
+ }
+
+ iommu_devinfo_cache = kmem_cache_create("iommu_devinfo",
+ sizeof(struct device_domain_info),
+ 0,
+ SLAB_HWCACHE_ALIGN,
+ NULL);
+ if (!iommu_devinfo_cache) {
+ pr_err("Couldn't create devinfo cache\n");
+ kmem_cache_destroy(fsl_pamu_domain_cache);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static phys_addr_t get_phys_addr(struct fsl_dma_domain *dma_domain, dma_addr_t iova)
+{
+ u32 win_cnt = dma_domain->win_cnt;
+ struct dma_window *win_ptr =
+ &dma_domain->win_arr[0];
+ struct iommu_domain_geometry *geom;
+
+ geom = &dma_domain->iommu_domain->geometry;
+
+ if (!win_cnt || !dma_domain->geom_size) {
+ pr_err("Number of windows/geometry not configured for the domain\n");
+ return 0;
+ }
+
+ if (win_cnt > 1) {
+ u64 subwin_size;
+ dma_addr_t subwin_iova;
+ u32 wnd;
+
+ subwin_size = dma_domain->geom_size >> ilog2(win_cnt);
+ subwin_iova = iova & ~(subwin_size - 1);
+ wnd = (subwin_iova - geom->aperture_start) >> ilog2(subwin_size);
+ win_ptr = &dma_domain->win_arr[wnd];
+ }
+
+ if (win_ptr->valid)
+ return (win_ptr->paddr + (iova & (win_ptr->size - 1)));
+
+ return 0;
+}
+
+static int map_subwins(int liodn, struct fsl_dma_domain *dma_domain)
+{
+ struct dma_window *sub_win_ptr =
+ &dma_domain->win_arr[0];
+ int i, ret;
+ unsigned long rpn, flags;
+
+ for (i = 0; i < dma_domain->win_cnt; i++) {
+ if (sub_win_ptr[i].valid) {
+ rpn = sub_win_ptr[i].paddr >>
+ PAMU_PAGE_SHIFT;
+ spin_lock_irqsave(&iommu_lock, flags);
+ ret = pamu_config_spaace(liodn, dma_domain->win_cnt, i,
+ sub_win_ptr[i].size,
+ ~(u32)0,
+ rpn,
+ dma_domain->snoop_id,
+ dma_domain->stash_id,
+ (i > 0) ? 1 : 0,
+ sub_win_ptr[i].prot);
+ spin_unlock_irqrestore(&iommu_lock, flags);
+ if (ret) {
+ pr_err("PAMU SPAACE configuration failed for liodn %d\n",
+ liodn);
+ return ret;
+ }
+ }
+ }
+
+ return ret;
+}
+
+static int map_win(int liodn, struct fsl_dma_domain *dma_domain)
+{
+ int ret;
+ struct dma_window *wnd = &dma_domain->win_arr[0];
+ phys_addr_t wnd_addr = dma_domain->iommu_domain->geometry.aperture_start;
+ unsigned long flags;
+
+ spin_lock_irqsave(&iommu_lock, flags);
+ ret = pamu_config_ppaace(liodn, wnd_addr,
+ wnd->size,
+ ~(u32)0,
+ wnd->paddr >> PAMU_PAGE_SHIFT,
+ dma_domain->snoop_id, dma_domain->stash_id,
+ 0, wnd->prot);
+ spin_unlock_irqrestore(&iommu_lock, flags);
+ if (ret)
+ pr_err("PAMU PAACE configuration failed for liodn %d\n",
+ liodn);
+
+ return ret;
+}
+
+/* Map the DMA window corresponding to the LIODN */
+static int map_liodn(int liodn, struct fsl_dma_domain *dma_domain)
+{
+ if (dma_domain->win_cnt > 1)
+ return map_subwins(liodn, dma_domain);
+ else
+ return map_win(liodn, dma_domain);
+
+}
+
+/* Update window/subwindow mapping for the LIODN */
+static int update_liodn(int liodn, struct fsl_dma_domain *dma_domain, u32 wnd_nr)
+{
+ int ret;
+ struct dma_window *wnd = &dma_domain->win_arr[wnd_nr];
+ unsigned long flags;
+
+ spin_lock_irqsave(&iommu_lock, flags);
+ if (dma_domain->win_cnt > 1) {
+ ret = pamu_config_spaace(liodn, dma_domain->win_cnt, wnd_nr,
+ wnd->size,
+ ~(u32)0,
+ wnd->paddr >> PAMU_PAGE_SHIFT,
+ dma_domain->snoop_id,
+ dma_domain->stash_id,
+ (wnd_nr > 0) ? 1 : 0,
+ wnd->prot);
+ if (ret)
+ pr_err("Subwindow reconfiguration failed for liodn %d\n", liodn);
+ } else {
+ phys_addr_t wnd_addr;
+
+ wnd_addr = dma_domain->iommu_domain->geometry.aperture_start;
+
+ ret = pamu_config_ppaace(liodn, wnd_addr,
+ wnd->size,
+ ~(u32)0,
+ wnd->paddr >> PAMU_PAGE_SHIFT,
+ dma_domain->snoop_id, dma_domain->stash_id,
+ 0, wnd->prot);
+ if (ret)
+ pr_err("Window reconfiguration failed for liodn %d\n", liodn);
+ }
+
+ spin_unlock_irqrestore(&iommu_lock, flags);
+
+ return ret;
+}
+
+static int update_liodn_stash(int liodn, struct fsl_dma_domain *dma_domain,
+ u32 val)
+{
+ int ret = 0, i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&iommu_lock, flags);
+ if (!dma_domain->win_arr) {
+ pr_err("Windows not configured, stash destination update failed for liodn %d\n", liodn);
+ spin_unlock_irqrestore(&iommu_lock, flags);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < dma_domain->win_cnt; i++) {
+ ret = pamu_update_paace_stash(liodn, i, val);
+ if (ret) {
+ pr_err("Failed to update SPAACE %d field for liodn %d\n ", i, liodn);
+ spin_unlock_irqrestore(&iommu_lock, flags);
+ return ret;
+ }
+ }
+
+ spin_unlock_irqrestore(&iommu_lock, flags);
+
+ return ret;
+}
+
+/* Set the geometry parameters for a LIODN */
+static int pamu_set_liodn(int liodn, struct device *dev,
+ struct fsl_dma_domain *dma_domain,
+ struct iommu_domain_geometry *geom_attr,
+ u32 win_cnt)
+{
+ phys_addr_t window_addr, window_size;
+ phys_addr_t subwin_size;
+ int ret = 0, i;
+ u32 omi_index = ~(u32)0;
+ unsigned long flags;
+
+ /*
+ * Configure the omi_index at the geometry setup time.
+ * This is a static value which depends on the type of
+ * device and would not change thereafter.
+ */
+ get_ome_index(&omi_index, dev);
+
+ window_addr = geom_attr->aperture_start;
+ window_size = dma_domain->geom_size;
+
+ spin_lock_irqsave(&iommu_lock, flags);
+ ret = pamu_disable_liodn(liodn);
+ if (!ret)
+ ret = pamu_config_ppaace(liodn, window_addr, window_size, omi_index,
+ 0, dma_domain->snoop_id,
+ dma_domain->stash_id, win_cnt, 0);
+ spin_unlock_irqrestore(&iommu_lock, flags);
+ if (ret) {
+ pr_err("PAMU PAACE configuration failed for liodn %d, win_cnt =%d\n", liodn, win_cnt);
+ return ret;
+ }
+
+ if (win_cnt > 1) {
+ subwin_size = window_size >> ilog2(win_cnt);
+ for (i = 0; i < win_cnt; i++) {
+ spin_lock_irqsave(&iommu_lock, flags);
+ ret = pamu_disable_spaace(liodn, i);
+ if (!ret)
+ ret = pamu_config_spaace(liodn, win_cnt, i,
+ subwin_size, omi_index,
+ 0, dma_domain->snoop_id,
+ dma_domain->stash_id,
+ 0, 0);
+ spin_unlock_irqrestore(&iommu_lock, flags);
+ if (ret) {
+ pr_err("PAMU SPAACE configuration failed for liodn %d\n", liodn);
+ return ret;
+ }
+ }
+ }
+
+ return ret;
+}
+
+static int check_size(u64 size, dma_addr_t iova)
+{
+ /*
+ * Size must be a power of two and at least be equal
+ * to PAMU page size.
+ */
+ if (!is_power_of_2(size) || size < PAMU_PAGE_SIZE) {
+ pr_err("%s: size too small or not a power of two\n", __func__);
+ return -EINVAL;
+ }
+
+ /* iova must be page size aligned*/
+ if (iova & (size - 1)) {
+ pr_err("%s: address is not aligned with window size\n", __func__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct fsl_dma_domain *iommu_alloc_dma_domain(void)
+{
+ struct fsl_dma_domain *domain;
+
+ domain = kmem_cache_zalloc(fsl_pamu_domain_cache, GFP_KERNEL);
+ if (!domain)
+ return NULL;
+
+ domain->stash_id = ~(u32)0;
+ domain->snoop_id = ~(u32)0;
+ domain->win_cnt = pamu_get_max_subwin_cnt();
+ domain->geom_size = 0;
+
+ INIT_LIST_HEAD(&domain->devices);
+
+ spin_lock_init(&domain->domain_lock);
+
+ return domain;
+}
+
+static inline struct device_domain_info *find_domain(struct device *dev)
+{
+ return dev->archdata.iommu_domain;
+}
+
+static void remove_device_ref(struct device_domain_info *info, u32 win_cnt)
+{
+ unsigned long flags;
+
+ list_del(&info->link);
+ spin_lock_irqsave(&iommu_lock, flags);
+ if (win_cnt > 1)
+ pamu_free_subwins(info->liodn);
+ pamu_disable_liodn(info->liodn);
+ spin_unlock_irqrestore(&iommu_lock, flags);
+ spin_lock_irqsave(&device_domain_lock, flags);
+ info->dev->archdata.iommu_domain = NULL;
+ kmem_cache_free(iommu_devinfo_cache, info);
+ spin_unlock_irqrestore(&device_domain_lock, flags);
+}
+
+static void detach_device(struct device *dev, struct fsl_dma_domain *dma_domain)
+{
+ struct device_domain_info *info, *tmp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dma_domain->domain_lock, flags);
+ /* Remove the device from the domain device list */
+ list_for_each_entry_safe(info, tmp, &dma_domain->devices, link) {
+ if (!dev || (info->dev == dev))
+ remove_device_ref(info, dma_domain->win_cnt);
+ }
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+}
+
+static void attach_device(struct fsl_dma_domain *dma_domain, int liodn, struct device *dev)
+{
+ struct device_domain_info *info, *old_domain_info;
+ unsigned long flags;
+
+ spin_lock_irqsave(&device_domain_lock, flags);
+ /*
+ * Check here if the device is already attached to domain or not.
+ * If the device is already attached to a domain detach it.
+ */
+ old_domain_info = find_domain(dev);
+ if (old_domain_info && old_domain_info->domain != dma_domain) {
+ spin_unlock_irqrestore(&device_domain_lock, flags);
+ detach_device(dev, old_domain_info->domain);
+ spin_lock_irqsave(&device_domain_lock, flags);
+ }
+
+ info = kmem_cache_zalloc(iommu_devinfo_cache, GFP_KERNEL);
+
+ info->dev = dev;
+ info->liodn = liodn;
+ info->domain = dma_domain;
+
+ list_add(&info->link, &dma_domain->devices);
+ /*
+ * In case of devices with multiple LIODNs just store
+ * the info for the first LIODN as all
+ * LIODNs share the same domain
+ */
+ if (!old_domain_info)
+ dev->archdata.iommu_domain = info;
+ spin_unlock_irqrestore(&device_domain_lock, flags);
+
+}
+
+static phys_addr_t fsl_pamu_iova_to_phys(struct iommu_domain *domain,
+ dma_addr_t iova)
+{
+ struct fsl_dma_domain *dma_domain = domain->priv;
+
+ if ((iova < domain->geometry.aperture_start) ||
+ iova > (domain->geometry.aperture_end))
+ return 0;
+
+ return get_phys_addr(dma_domain, iova);
+}
+
+static int fsl_pamu_domain_has_cap(struct iommu_domain *domain,
+ unsigned long cap)
+{
+ return cap == IOMMU_CAP_CACHE_COHERENCY;
+}
+
+static void fsl_pamu_domain_destroy(struct iommu_domain *domain)
+{
+ struct fsl_dma_domain *dma_domain = domain->priv;
+
+ domain->priv = NULL;
+
+ /* remove all the devices from the device list */
+ detach_device(NULL, dma_domain);
+
+ dma_domain->enabled = 0;
+ dma_domain->mapped = 0;
+
+ kmem_cache_free(fsl_pamu_domain_cache, dma_domain);
+}
+
+static int fsl_pamu_domain_init(struct iommu_domain *domain)
+{
+ struct fsl_dma_domain *dma_domain;
+
+ dma_domain = iommu_alloc_dma_domain();
+ if (!dma_domain) {
+ pr_err("dma_domain allocation failed\n");
+ return -ENOMEM;
+ }
+ domain->priv = dma_domain;
+ dma_domain->iommu_domain = domain;
+ /* defaul geometry 64 GB i.e. maximum system address */
+ domain->geometry.aperture_start = 0;
+ domain->geometry.aperture_end = (1ULL << 36) - 1;
+ domain->geometry.force_aperture = true;
+
+ return 0;
+}
+
+/* Configure geometry settings for all LIODNs associated with domain */
+static int pamu_set_domain_geometry(struct fsl_dma_domain *dma_domain,
+ struct iommu_domain_geometry *geom_attr,
+ u32 win_cnt)
+{
+ struct device_domain_info *info;
+ int ret = 0;
+
+ list_for_each_entry(info, &dma_domain->devices, link) {
+ ret = pamu_set_liodn(info->liodn, info->dev, dma_domain,
+ geom_attr, win_cnt);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+/* Update stash destination for all LIODNs associated with the domain */
+static int update_domain_stash(struct fsl_dma_domain *dma_domain, u32 val)
+{
+ struct device_domain_info *info;
+ int ret = 0;
+
+ list_for_each_entry(info, &dma_domain->devices, link) {
+ ret = update_liodn_stash(info->liodn, dma_domain, val);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+/* Update domain mappings for all LIODNs associated with the domain */
+static int update_domain_mapping(struct fsl_dma_domain *dma_domain, u32 wnd_nr)
+{
+ struct device_domain_info *info;
+ int ret = 0;
+
+ list_for_each_entry(info, &dma_domain->devices, link) {
+ ret = update_liodn(info->liodn, dma_domain, wnd_nr);
+ if (ret)
+ break;
+ }
+ return ret;
+}
+
+static int disable_domain_win(struct fsl_dma_domain *dma_domain, u32 wnd_nr)
+{
+ struct device_domain_info *info;
+ int ret = 0;
+
+ list_for_each_entry(info, &dma_domain->devices, link) {
+ if (dma_domain->win_cnt == 1 && dma_domain->enabled) {
+ ret = pamu_disable_liodn(info->liodn);
+ if (!ret)
+ dma_domain->enabled = 0;
+ } else {
+ ret = pamu_disable_spaace(info->liodn, wnd_nr);
+ }
+ }
+
+ return ret;
+}
+
+static void fsl_pamu_window_disable(struct iommu_domain *domain, u32 wnd_nr)
+{
+ struct fsl_dma_domain *dma_domain = domain->priv;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&dma_domain->domain_lock, flags);
+ if (!dma_domain->win_arr) {
+ pr_err("Number of windows not configured\n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return;
+ }
+
+ if (wnd_nr >= dma_domain->win_cnt) {
+ pr_err("Invalid window index\n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return;
+ }
+
+ if (dma_domain->win_arr[wnd_nr].valid) {
+ ret = disable_domain_win(dma_domain, wnd_nr);
+ if (!ret) {
+ dma_domain->win_arr[wnd_nr].valid = 0;
+ dma_domain->mapped--;
+ }
+ }
+
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+
+}
+
+static int fsl_pamu_window_enable(struct iommu_domain *domain, u32 wnd_nr,
+ phys_addr_t paddr, u64 size, int prot)
+{
+ struct fsl_dma_domain *dma_domain = domain->priv;
+ struct dma_window *wnd;
+ int pamu_prot = 0;
+ int ret;
+ unsigned long flags;
+ u64 win_size;
+
+ if (prot & IOMMU_READ)
+ pamu_prot |= PAACE_AP_PERMS_QUERY;
+ if (prot & IOMMU_WRITE)
+ pamu_prot |= PAACE_AP_PERMS_UPDATE;
+
+ spin_lock_irqsave(&dma_domain->domain_lock, flags);
+ if (!dma_domain->win_arr) {
+ pr_err("Number of windows not configured\n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return -ENODEV;
+ }
+
+ if (wnd_nr >= dma_domain->win_cnt) {
+ pr_err("Invalid window index\n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return -EINVAL;
+ }
+
+ win_size = dma_domain->geom_size >> ilog2(dma_domain->win_cnt);
+ if (size > win_size) {
+ pr_err("Invalid window size \n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return -EINVAL;
+ }
+
+ if (dma_domain->win_cnt == 1) {
+ if (dma_domain->enabled) {
+ pr_err("Disable the window before updating the mapping\n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return -EBUSY;
+ }
+
+ ret = check_size(size, domain->geometry.aperture_start);
+ if (ret) {
+ pr_err("Aperture start not aligned to the size\n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return -EINVAL;
+ }
+ }
+
+ wnd = &dma_domain->win_arr[wnd_nr];
+ if (!wnd->valid) {
+ wnd->paddr = paddr;
+ wnd->size = size;
+ wnd->prot = pamu_prot;
+
+ ret = update_domain_mapping(dma_domain, wnd_nr);
+ if (!ret) {
+ wnd->valid = 1;
+ dma_domain->mapped++;
+ }
+ } else {
+ pr_err("Disable the window before updating the mapping\n");
+ ret = -EBUSY;
+ }
+
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+
+ return ret;
+}
+
+/*
+ * Attach the LIODN to the DMA domain and configure the geometry
+ * and window mappings.
+ */
+static int handle_attach_device(struct fsl_dma_domain *dma_domain,
+ struct device *dev, const u32 *liodn,
+ int num)
+{
+ unsigned long flags;
+ struct iommu_domain *domain = dma_domain->iommu_domain;
+ int ret = 0;
+ int i;
+
+ spin_lock_irqsave(&dma_domain->domain_lock, flags);
+ for (i = 0; i < num; i++) {
+
+ /* Ensure that LIODN value is valid */
+ if (liodn[i] >= PAACE_NUMBER_ENTRIES) {
+ pr_err("Invalid liodn %d, attach device failed for %s\n",
+ liodn[i], dev->of_node->full_name);
+ ret = -EINVAL;
+ break;
+ }
+
+ attach_device(dma_domain, liodn[i], dev);
+ /*
+ * Check if geometry has already been configured
+ * for the domain. If yes, set the geometry for
+ * the LIODN.
+ */
+ if (dma_domain->win_arr) {
+ u32 win_cnt = dma_domain->win_cnt > 1 ? dma_domain->win_cnt : 0;
+ ret = pamu_set_liodn(liodn[i], dev, dma_domain,
+ &domain->geometry,
+ win_cnt);
+ if (ret)
+ break;
+ if (dma_domain->mapped) {
+ /*
+ * Create window/subwindow mapping for
+ * the LIODN.
+ */
+ ret = map_liodn(liodn[i], dma_domain);
+ if (ret)
+ break;
+ }
+ }
+ }
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+
+ return ret;
+}
+
+static int fsl_pamu_attach_device(struct iommu_domain *domain,
+ struct device *dev)
+{
+ struct fsl_dma_domain *dma_domain = domain->priv;
+ const u32 *liodn;
+ u32 liodn_cnt;
+ int len, ret = 0;
+ struct pci_dev *pdev = NULL;
+ struct pci_controller *pci_ctl;
+
+ /*
+ * Use LIODN of the PCI controller while attaching a
+ * PCI device.
+ */
+ if (dev->bus == &pci_bus_type) {
+ pdev = to_pci_dev(dev);
+ pci_ctl = pci_bus_to_host(pdev->bus);
+ /*
+ * make dev point to pci controller device
+ * so we can get the LIODN programmed by
+ * u-boot.
+ */
+ dev = pci_ctl->parent;
+ }
+
+ liodn = of_get_property(dev->of_node, "fsl,liodn", &len);
+ if (liodn) {
+ liodn_cnt = len / sizeof(u32);
+ ret = handle_attach_device(dma_domain, dev,
+ liodn, liodn_cnt);
+ } else {
+ pr_err("missing fsl,liodn property at %s\n",
+ dev->of_node->full_name);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void fsl_pamu_detach_device(struct iommu_domain *domain,
+ struct device *dev)
+{
+ struct fsl_dma_domain *dma_domain = domain->priv;
+ const u32 *prop;
+ int len;
+ struct pci_dev *pdev = NULL;
+ struct pci_controller *pci_ctl;
+
+ /*
+ * Use LIODN of the PCI controller while detaching a
+ * PCI device.
+ */
+ if (dev->bus == &pci_bus_type) {
+ pdev = to_pci_dev(dev);
+ pci_ctl = pci_bus_to_host(pdev->bus);
+ /*
+ * make dev point to pci controller device
+ * so we can get the LIODN programmed by
+ * u-boot.
+ */
+ dev = pci_ctl->parent;
+ }
+
+ prop = of_get_property(dev->of_node, "fsl,liodn", &len);
+ if (prop)
+ detach_device(dev, dma_domain);
+ else
+ pr_err("missing fsl,liodn property at %s\n",
+ dev->of_node->full_name);
+}
+
+static int configure_domain_geometry(struct iommu_domain *domain, void *data)
+{
+ struct iommu_domain_geometry *geom_attr = data;
+ struct fsl_dma_domain *dma_domain = domain->priv;
+ dma_addr_t geom_size;
+ unsigned long flags;
+
+ geom_size = geom_attr->aperture_end - geom_attr->aperture_start + 1;
+ /*
+ * Sanity check the geometry size. Also, we do not support
+ * DMA outside of the geometry.
+ */
+ if (check_size(geom_size, geom_attr->aperture_start) ||
+ !geom_attr->force_aperture) {
+ pr_err("Invalid PAMU geometry attributes\n");
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&dma_domain->domain_lock, flags);
+ if (dma_domain->enabled) {
+ pr_err("Can't set geometry attributes as domain is active\n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return -EBUSY;
+ }
+
+ /* Copy the domain geometry information */
+ memcpy(&domain->geometry, geom_attr,
+ sizeof(struct iommu_domain_geometry));
+ dma_domain->geom_size = geom_size;
+
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+
+ return 0;
+}
+
+/* Set the domain stash attribute */
+static int configure_domain_stash(struct fsl_dma_domain *dma_domain, void *data)
+{
+ struct pamu_stash_attribute *stash_attr = data;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&dma_domain->domain_lock, flags);
+
+ memcpy(&dma_domain->dma_stash, stash_attr,
+ sizeof(struct pamu_stash_attribute));
+
+ dma_domain->stash_id = get_stash_id(stash_attr->cache,
+ stash_attr->cpu);
+ if (dma_domain->stash_id == ~(u32)0) {
+ pr_err("Invalid stash attributes\n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return -EINVAL;
+ }
+
+ ret = update_domain_stash(dma_domain, dma_domain->stash_id);
+
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+
+ return ret;
+}
+
+/* Configure domain dma state i.e. enable/disable DMA*/
+static int configure_domain_dma_state(struct fsl_dma_domain *dma_domain, bool enable)
+{
+ struct device_domain_info *info;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&dma_domain->domain_lock, flags);
+
+ if (enable && !dma_domain->mapped) {
+ pr_err("Can't enable DMA domain without valid mapping\n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return -ENODEV;
+ }
+
+ dma_domain->enabled = enable;
+ list_for_each_entry(info, &dma_domain->devices,
+ link) {
+ ret = (enable) ? pamu_enable_liodn(info->liodn) :
+ pamu_disable_liodn(info->liodn);
+ if (ret)
+ pr_err("Unable to set dma state for liodn %d",
+ info->liodn);
+ }
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+
+ return 0;
+}
+
+static int fsl_pamu_set_domain_attr(struct iommu_domain *domain,
+ enum iommu_attr attr_type, void *data)
+{
+ struct fsl_dma_domain *dma_domain = domain->priv;
+ int ret = 0;
+
+
+ switch (attr_type) {
+ case DOMAIN_ATTR_GEOMETRY:
+ ret = configure_domain_geometry(domain, data);
+ break;
+ case DOMAIN_ATTR_FSL_PAMU_STASH:
+ ret = configure_domain_stash(dma_domain, data);
+ break;
+ case DOMAIN_ATTR_FSL_PAMU_ENABLE:
+ ret = configure_domain_dma_state(dma_domain, *(int *)data);
+ break;
+ default:
+ pr_err("Unsupported attribute type\n");
+ ret = -EINVAL;
+ break;
+ };
+
+ return ret;
+}
+
+static int fsl_pamu_get_domain_attr(struct iommu_domain *domain,
+ enum iommu_attr attr_type, void *data)
+{
+ struct fsl_dma_domain *dma_domain = domain->priv;
+ int ret = 0;
+
+
+ switch (attr_type) {
+ case DOMAIN_ATTR_FSL_PAMU_STASH:
+ memcpy((struct pamu_stash_attribute *) data, &dma_domain->dma_stash,
+ sizeof(struct pamu_stash_attribute));
+ break;
+ case DOMAIN_ATTR_FSL_PAMU_ENABLE:
+ *(int *)data = dma_domain->enabled;
+ break;
+ case DOMAIN_ATTR_FSL_PAMUV1:
+ *(int *)data = DOMAIN_ATTR_FSL_PAMUV1;
+ break;
+ default:
+ pr_err("Unsupported attribute type\n");
+ ret = -EINVAL;
+ break;
+ };
+
+ return ret;
+}
+
+#define REQ_ACS_FLAGS (PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF)
+
+static struct iommu_group *get_device_iommu_group(struct device *dev)
+{
+ struct iommu_group *group;
+
+ group = iommu_group_get(dev);
+ if (!group)
+ group = iommu_group_alloc();
+
+ return group;
+}
+
+static bool check_pci_ctl_endpt_part(struct pci_controller *pci_ctl)
+{
+ u32 version;
+
+ /* Check the PCI controller version number by readding BRR1 register */
+ version = in_be32(pci_ctl->cfg_addr + (PCI_FSL_BRR1 >> 2));
+ version &= PCI_FSL_BRR1_VER;
+ /* If PCI controller version is >= 0x204 we can partition endpoints*/
+ if (version >= 0x204)
+ return 1;
+
+ return 0;
+}
+
+static struct iommu_group *get_peer_pci_device_group(struct pci_dev *pdev)
+{
+ struct iommu_group *group = NULL;
+
+ /* check if this is the first device on the bus*/
+ if (pdev->bus_list.next == pdev->bus_list.prev) {
+ struct pci_bus *bus = pdev->bus->parent;
+ /* Traverese the parent bus list to get
+ * pdev & dev for the sibling device.
+ */
+ while (bus) {
+ if (!list_empty(&bus->devices)) {
+ pdev = container_of(bus->devices.next,
+ struct pci_dev, bus_list);
+ group = iommu_group_get(&pdev->dev);
+ break;
+ } else
+ bus = bus->parent;
+ }
+ } else {
+ /*
+ * Get the pdev & dev for the sibling device
+ */
+ pdev = container_of(pdev->bus_list.prev,
+ struct pci_dev, bus_list);
+ group = iommu_group_get(&pdev->dev);
+ }
+
+ return group;
+}
+
+static struct iommu_group *get_pci_device_group(struct pci_dev *pdev)
+{
+ struct iommu_group *group = NULL;
+ struct pci_dev *bridge, *dma_pdev = NULL;
+ struct pci_controller *pci_ctl;
+ bool pci_endpt_partioning;
+
+ pci_ctl = pci_bus_to_host(pdev->bus);
+ pci_endpt_partioning = check_pci_ctl_endpt_part(pci_ctl);
+ /* We can partition PCIe devices so assign device group to the device */
+ if (pci_endpt_partioning) {
+ bridge = pci_find_upstream_pcie_bridge(pdev);
+ if (bridge) {
+ if (pci_is_pcie(bridge))
+ dma_pdev = pci_get_domain_bus_and_slot(
+ pci_domain_nr(pdev->bus),
+ bridge->subordinate->number, 0);
+ if (!dma_pdev)
+ dma_pdev = pci_dev_get(bridge);
+ } else
+ dma_pdev = pci_dev_get(pdev);
+
+ /* Account for quirked devices */
+ swap_pci_ref(&dma_pdev, pci_get_dma_source(dma_pdev));
+
+ /*
+ * If it's a multifunction device that does not support our
+ * required ACS flags, add to the same group as function 0.
+ */
+ if (dma_pdev->multifunction &&
+ !pci_acs_enabled(dma_pdev, REQ_ACS_FLAGS))
+ swap_pci_ref(&dma_pdev,
+ pci_get_slot(dma_pdev->bus,
+ PCI_DEVFN(PCI_SLOT(dma_pdev->devfn),
+ 0)));
+
+ group = get_device_iommu_group(&pdev->dev);
+ pci_dev_put(pdev);
+ /*
+ * PCIe controller is not a paritionable entity
+ * free the controller device iommu_group.
+ */
+ if (pci_ctl->parent->iommu_group)
+ iommu_group_remove_device(pci_ctl->parent);
+ } else {
+ /*
+ * All devices connected to the controller will share the
+ * PCI controllers device group. If this is the first
+ * device to be probed for the pci controller, copy the
+ * device group information from the PCI controller device
+ * node and remove the PCI controller iommu group.
+ * For subsequent devices, the iommu group information can
+ * be obtained from sibling devices (i.e. from the bus_devices
+ * link list).
+ */
+ if (pci_ctl->parent->iommu_group) {
+ group = get_device_iommu_group(pci_ctl->parent);
+ iommu_group_remove_device(pci_ctl->parent);
+ } else
+ group = get_peer_pci_device_group(pdev);
+ }
+
+ return group;
+}
+
+static int fsl_pamu_add_device(struct device *dev)
+{
+ struct iommu_group *group = NULL;
+ struct pci_dev *pdev;
+ const u32 *prop;
+ int ret, len;
+
+ /*
+ * For platform devices we allocate a separate group for
+ * each of the devices.
+ */
+ if (dev->bus == &pci_bus_type) {
+ pdev = to_pci_dev(dev);
+ /* Don't create device groups for virtual PCI bridges */
+ if (pdev->subordinate)
+ return 0;
+
+ group = get_pci_device_group(pdev);
+
+ } else {
+ prop = of_get_property(dev->of_node, "fsl,liodn", &len);
+ if (prop)
+ group = get_device_iommu_group(dev);
+ }
+
+ if (!group || IS_ERR(group))
+ return PTR_ERR(group);
+
+ ret = iommu_group_add_device(group, dev);
+
+ iommu_group_put(group);
+ return ret;
+}
+
+static void fsl_pamu_remove_device(struct device *dev)
+{
+ iommu_group_remove_device(dev);
+}
+
+static int fsl_pamu_set_windows(struct iommu_domain *domain, u32 w_count)
+{
+ struct fsl_dma_domain *dma_domain = domain->priv;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&dma_domain->domain_lock, flags);
+ /* Ensure domain is inactive i.e. DMA should be disabled for the domain */
+ if (dma_domain->enabled) {
+ pr_err("Can't set geometry attributes as domain is active\n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return -EBUSY;
+ }
+
+ /* Ensure that the geometry has been set for the domain */
+ if (!dma_domain->geom_size) {
+ pr_err("Please configure geometry before setting the number of windows\n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return -EINVAL;
+ }
+
+ /*
+ * Ensure we have valid window count i.e. it should be less than
+ * maximum permissible limit and should be a power of two.
+ */
+ if (w_count > pamu_get_max_subwin_cnt() || !is_power_of_2(w_count)) {
+ pr_err("Invalid window count\n");
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return -EINVAL;
+ }
+
+ ret = pamu_set_domain_geometry(dma_domain, &domain->geometry,
+ ((w_count > 1) ? w_count : 0));
+ if (!ret) {
+ if (dma_domain->win_arr)
+ kfree(dma_domain->win_arr);
+ dma_domain->win_arr = kzalloc(sizeof(struct dma_window) *
+ w_count, GFP_KERNEL);
+ if (!dma_domain->win_arr) {
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+ return -ENOMEM;
+ }
+ dma_domain->win_cnt = w_count;
+ }
+ spin_unlock_irqrestore(&dma_domain->domain_lock, flags);
+
+ return ret;
+}
+
+static u32 fsl_pamu_get_windows(struct iommu_domain *domain)
+{
+ struct fsl_dma_domain *dma_domain = domain->priv;
+
+ return dma_domain->win_cnt;
+}
+
+static struct iommu_ops fsl_pamu_ops = {
+ .domain_init = fsl_pamu_domain_init,
+ .domain_destroy = fsl_pamu_domain_destroy,
+ .attach_dev = fsl_pamu_attach_device,
+ .detach_dev = fsl_pamu_detach_device,
+ .domain_window_enable = fsl_pamu_window_enable,
+ .domain_window_disable = fsl_pamu_window_disable,
+ .domain_get_windows = fsl_pamu_get_windows,
+ .domain_set_windows = fsl_pamu_set_windows,
+ .iova_to_phys = fsl_pamu_iova_to_phys,
+ .domain_has_cap = fsl_pamu_domain_has_cap,
+ .domain_set_attr = fsl_pamu_set_domain_attr,
+ .domain_get_attr = fsl_pamu_get_domain_attr,
+ .add_device = fsl_pamu_add_device,
+ .remove_device = fsl_pamu_remove_device,
+};
+
+int pamu_domain_init()
+{
+ int ret = 0;
+
+ ret = iommu_init_mempool();
+ if (ret)
+ return ret;
+
+ bus_set_iommu(&platform_bus_type, &fsl_pamu_ops);
+ bus_set_iommu(&pci_bus_type, &fsl_pamu_ops);
+
+ return ret;
+}
diff --git a/drivers/iommu/fsl_pamu_domain.h b/drivers/iommu/fsl_pamu_domain.h
new file mode 100644
index 0000000..c90293f
--- /dev/null
+++ b/drivers/iommu/fsl_pamu_domain.h
@@ -0,0 +1,85 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ */
+
+#ifndef __FSL_PAMU_DOMAIN_H
+#define __FSL_PAMU_DOMAIN_H
+
+#include "fsl_pamu.h"
+
+struct dma_window {
+ phys_addr_t paddr;
+ u64 size;
+ int valid;
+ int prot;
+};
+
+struct fsl_dma_domain {
+ /*
+ * Indicates the geometry size for the domain.
+ * This would be set when the geometry is
+ * configured for the domain.
+ */
+ dma_addr_t geom_size;
+ /*
+ * Number of windows assocaited with this domain.
+ * During domain initialization, it is set to the
+ * the maximum number of subwindows allowed for a LIODN.
+ * Minimum value for this is 1 indicating a single PAMU
+ * window, without any sub windows. Value can be set/
+ * queried by set_attr/get_attr API for DOMAIN_ATTR_WINDOWS.
+ * Value can only be set once the geometry has been configured.
+ */
+ u32 win_cnt;
+ /*
+ * win_arr contains information of the configured
+ * windows for a domain. This is allocated only
+ * when the number of windows for the domain are
+ * set.
+ */
+ struct dma_window *win_arr;
+ /* list of devices associated with the domain */
+ struct list_head devices;
+ /* dma_domain states:
+ * mapped - A particular mapping has been created
+ * within the configured geometry.
+ * enabled - DMA has been enabled for the given
+ * domain. This translates to setting of the
+ * valid bit for the primary PAACE in the PAMU
+ * PAACT table. Domain geometry should be set and
+ * it must have a valid mapping before DMA can be
+ * enabled for it.
+ *
+ */
+ int mapped;
+ int enabled;
+ /* stash_id obtained from the stash attribute details */
+ u32 stash_id;
+ struct pamu_stash_attribute dma_stash;
+ u32 snoop_id;
+ struct iommu_domain *iommu_domain;
+ spinlock_t domain_lock;
+};
+
+/* domain-device relationship */
+struct device_domain_info {
+ struct list_head link; /* link to domain siblings */
+ struct device *dev;
+ u32 liodn;
+ struct fsl_dma_domain *domain; /* pointer to domain */
+};
+#endif /* __FSL_PAMU_DOMAIN_H */
--
1.7.4.1
^ permalink raw reply related
* [PATCH 1/2 v15] iommu/fsl: Add additional iommu attributes required by the PAMU driver.
From: Varun Sethi @ 2013-04-24 11:35 UTC (permalink / raw)
To: joro, iommu, linuxppc-dev, linux-kernel, galak, benh,
stuart.yoder, scottwood
Cc: Varun Sethi
Added the following domain attributes for the FSL PAMU driver:
1. Added new iommu stash attribute, which allows setting of the
LIODN specific stash id parameter through IOMMU API.
2. Added an attribute for enabling/disabling DMA to a particular
memory window.
3. Added domain attribute to check for PAMUV1 specific constraints.
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
---
v15 changes:
- Moved fsl_pamu_stash.h under arch/powerpc/include/asm.
v14 changes:
- Add FSL prefix to PAMU attributes.
v13 changes:
- created a new file include/linux/fsl_pamu_stash.h for stash
attributes.
v12 changes:
- Moved PAMU specifc stash ids and structures to PAMU header file.
- no change in v11.
- no change in v10.
arch/powerpc/include/asm/fsl_pamu_stash.h | 39 +++++++++++++++++++++++++++++
include/linux/iommu.h | 16 ++++++++++++
2 files changed, 55 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/include/asm/fsl_pamu_stash.h
diff --git a/arch/powerpc/include/asm/fsl_pamu_stash.h b/arch/powerpc/include/asm/fsl_pamu_stash.h
new file mode 100644
index 0000000..caa1b21
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_pamu_stash.h
@@ -0,0 +1,39 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ */
+
+#ifndef __FSL_PAMU_STASH_H
+#define __FSL_PAMU_STASH_H
+
+/* cache stash targets */
+enum pamu_stash_target {
+ PAMU_ATTR_CACHE_L1 = 1,
+ PAMU_ATTR_CACHE_L2,
+ PAMU_ATTR_CACHE_L3,
+};
+
+/*
+ * This attribute allows configuring stashig specific parameters
+ * in the PAMU hardware.
+ */
+
+struct pamu_stash_attribute {
+ u32 cpu; /* cpu number */
+ u32 cache; /* cache to stash to: L1,L2,L3 */
+};
+
+#endif /* __FSL_PAMU_STASH_H */
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 2727810..313d17a 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -57,10 +57,26 @@ struct iommu_domain {
#define IOMMU_CAP_CACHE_COHERENCY 0x1
#define IOMMU_CAP_INTR_REMAP 0x2 /* isolates device intrs */
+/*
+ * Following constraints are specifc to FSL_PAMUV1:
+ * -aperture must be power of 2, and naturally aligned
+ * -number of windows must be power of 2, and address space size
+ * of each window is determined by aperture size / # of windows
+ * -the actual size of the mapped region of a window must be power
+ * of 2 starting with 4KB and physical address must be naturally
+ * aligned.
+ * DOMAIN_ATTR_FSL_PAMUV1 corresponds to the above mentioned contraints.
+ * The caller can invoke iommu_domain_get_attr to check if the underlying
+ * iommu implementation supports these constraints.
+ */
+
enum iommu_attr {
DOMAIN_ATTR_GEOMETRY,
DOMAIN_ATTR_PAGING,
DOMAIN_ATTR_WINDOWS,
+ DOMAIN_ATTR_FSL_PAMU_STASH,
+ DOMAIN_ATTR_FSL_PAMU_ENABLE,
+ DOMAIN_ATTR_FSL_PAMUV1,
DOMAIN_ATTR_MAX,
};
--
1.7.4.1
^ permalink raw reply related
* Re: "attempt to move .org backwards" still show up
From: Mike @ 2013-04-24 12:47 UTC (permalink / raw)
To: Michael Neuling
Cc: sfr, matt, gang.chen, linux-kernel, paulus, Aneesh Kumar K.V,
linuxppc-dev
In-Reply-To: <30651.1366799858@ale.ozlabs.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 1061 bytes --]
在 2013-04-24三的 20:37 +1000，Michael Neuling写道：
> Mike Qiu <qiudayu@linux.vnet.ibm.com> wrote:
>
> > 于 2013/4/24 16:31, Michael Ellerman 写道:
> > > On Wed, Apr 24, 2013 at 04:22:53PM +0800, Mike Qiu wrote:
> > >> Hi all
> > >>
> > >> I get an error message when I compile the source code in Power7 platform
> > >> use the newest upstream kernel.
> > > Hi Mike,
> > >
> > > It depends on what your .config is. What defconfig are you building?
> > I just copy the config file from /boot/config.* to .config and use make
> > menuconfig
> > change nothing by manually, then save.
>
> Can you post the resulting config here?
>
> Do you have commit in your tree?
> commit 087aa036eb79f24b856893190359ba812b460f45
> Author: Chen Gang <gang.chen@asianux.com>
> powerpc: make additional room in exception vector area
>
Sure, that commit certainly in my git tree. And I just try to remove the
code and re-git clone the source code from upstream, this problem still
happen.
I will post the config file as the attachment
:)
Thanks
Mike
> Mikey
[-- Attachment #2: config_3.9 --]
[-- Type: text/plain, Size: 106131 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 3.9.0-rc8 Kernel Configuration
#
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_PPC_BOOK3S_64=y
# CONFIG_PPC_BOOK3E_64 is not set
CONFIG_GENERIC_CPU=y
# CONFIG_CELL_CPU is not set
# CONFIG_POWER4_CPU is not set
# CONFIG_POWER5_CPU is not set
# CONFIG_POWER6_CPU is not set
# CONFIG_POWER7_CPU is not set
CONFIG_PPC_BOOK3S=y
CONFIG_POWER3=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_PPC_ICSWX=y
# CONFIG_PPC_ICSWX_PID is not set
# CONFIG_PPC_ICSWX_USE_SIGILL is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
CONFIG_PPC_HAVE_PMU_SUPPORT=y
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=1024
CONFIG_PPC_DOORBELL=y
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_PPC_UDBG_16550=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_EPAPR_BOOT is not set
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_PPC_OF_PLATFORM_PCI is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PPC_EMULATE_SSTEP=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_ALWAYS_USE_PERSISTENT_CLOCK is not set
CONFIG_GENERIC_TIME_VSYSCALL_OLD=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_COMPAT_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
CONFIG_PPC_MSI_BITMAP=y
CONFIG_PPC_XICS=y
CONFIG_PPC_ICP_NATIVE=y
CONFIG_PPC_ICP_HV=y
CONFIG_PPC_ICS_RTAS=y
# CONFIG_GE_FPGA is not set
#
# Platform support
#
CONFIG_PPC_POWERNV=y
CONFIG_PPC_POWERNV_RTAS=y
CONFIG_PPC_PSERIES=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
CONFIG_PSERIES_MSI=y
CONFIG_PSERIES_ENERGY=m
CONFIG_SCANLOG=y
CONFIG_IO_EVENT_IRQ=y
CONFIG_LPARCFG=y
CONFIG_PPC_SMLPAR=y
CONFIG_CMM=y
CONFIG_DTL=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
# CONFIG_PPC_PASEMI is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_CELL_QPACE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_PPC_WSP is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_PPC_SMP_MUXED_IPI=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_PPC_EPAPR_HV_PIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_MPIC_MSGR is not set
CONFIG_PPC_I8259=y
CONFIG_U3_DART=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_PPC_RTAS_DAEMON=y
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
CONFIG_MMIO_NVRAM=y
CONFIG_MPIC_U3_HT_IRQS=y
CONFIG_IBMVIO=y
CONFIG_IBMEBUS=y
# CONFIG_PPC_MPC106 is not set
CONFIG_PPC_970_NAP=y
CONFIG_PPC_P7_NAP=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# PowerPC CPU frequency scaling drivers
#
CONFIG_CPU_FREQ_MAPLE=y
#
# CPU Frequency drivers
#
CONFIG_CPU_FREQ_PMAC64=y
#
# CPUIdle driver
#
# CONFIG_CPU_IDLE is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_SIMPLE_GPIO=y
#
# Kernel options
#
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
# CONFIG_PPC_TRANSACTIONAL_MEM is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_FA_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=8
CONFIG_MAX_ACTIVE_REGIONS=256
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_PPC_HAS_HASH_64K=y
# CONFIG_PPC_4K_PAGES is not set
CONFIG_PPC_64K_PAGES=y
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_PPC_SUBPAGE_PROT=y
CONFIG_SCHED_SMT=y
# CONFIG_PPC_DENORMALISATION is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
# CONFIG_HAS_RAPIDIO is not set
# CONFIG_RAPIDIO is not set
CONFIG_NONSTATIC_KERNEL=y
CONFIG_RELOCATABLE=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_ULOG=m
# CONFIG_NF_NAT_IPV4 is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_NF_NAT_IPV6 is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_IEEE802154=m
CONFIG_IEEE802154_6LOWPAN=m
# CONFIG_MAC802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
# CONFIG_NET_SCH_CODEL is not set
# CONFIG_NET_SCH_FQ_CODEL is not set
CONFIG_NET_SCH_INGRESS=m
# CONFIG_NET_SCH_PLUG is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_IPSET is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
# CONFIG_VSOCKETS is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NETPRIO_CGROUP=m
CONFIG_BQL=y
CONFIG_BPF_JIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIUART_3WIRE is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
#
# Device Tree and Open Firmware support
#
CONFIG_PROC_DEVICETREE=y
# CONFIG_OF_SELFTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=m
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_NVME is not set
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1780 is not set
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
CONFIG_BLK_DEV_IT8172=m
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDE_PMAC is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ARCMSR=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_UFSHCD is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_IBMVSCSI=m
CONFIG_SCSI_IBMVSCSIS=m
CONFIG_SCSI_IBMVFC=m
# CONFIG_SCSI_IBMVFC_TRACE is not set
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
# CONFIG_TCM_QLA2XXX is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_HIGHBANK is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARASAN_CF=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MACIO=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PLATFORM=m
CONFIG_PATA_OF_PLATFORM=m
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
# CONFIG_DM_CACHE is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_RAID=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
# CONFIG_DM_VERITY is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_LED=y
CONFIG_ADB_PMU_LED_IDE=y
CONFIG_PMAC_SMU=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_THERM_PM72=m
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=m
# CONFIG_WINDFARM_PM72 is not set
# CONFIG_WINDFARM_RM31 is not set
CONFIG_WINDFARM_PM91=m
CONFIG_WINDFARM_PM112=m
CONFIG_WINDFARM_PM121=m
CONFIG_PMAC_RACKMETER=m
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_MII=m
CONFIG_IFB=m
CONFIG_NET_TEAM=m
# CONFIG_NET_TEAM_MODE_BROADCAST is not set
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
# CONFIG_NET_TEAM_MODE_LOADBALANCE is not set
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_VXLAN is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_SUNGEM_PHY=m
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_ATM_SOLOS=m
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=m
CONFIG_NET_DSA_MV88E6060=m
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=m
CONFIG_NET_DSA_MV88E6123_61_65=m
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_NET_CADENCE=y
# CONFIG_ARM_AT91_ETHER is not set
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_CALXEDA_XGMAC=m
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_IBM=y
CONFIG_IBMVETH=m
# CONFIG_IBM_EMAC_ZMII is not set
# CONFIG_IBM_EMAC_RGMII is not set
# CONFIG_IBM_EMAC_TAH is not set
# CONFIG_IBM_EMAC_EMAC4 is not set
# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
CONFIG_EHEA=m
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_IP1000=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_SFC=m
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_PLATFORM is not set
# CONFIG_STMMAC_PCI is not set
# CONFIG_STMMAC_DEBUG_FS is not set
# CONFIG_STMMAC_DA is not set
CONFIG_STMMAC_RING=y
# CONFIG_STMMAC_CHAINED is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_NET_VENDOR_XILINX is not set
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_BCM87XX_PHY is not set
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_GPIO=m
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_CDC_MBIM is not set
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
# CONFIG_USB_NET_QMI_WWAN is not set
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_MWL8K=m
# CONFIG_ATH_CARDS is not set
CONFIG_B43=m
CONFIG_B43_BCMA=y
# CONFIG_B43_BCMA_EXTRA is not set
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_SDIO=y
# CONFIG_BRCMFMAC_SDIO_OOB is not set
# CONFIG_BRCMFMAC_USB is not set
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLDVM=m
# CONFIG_IWLMVM is not set
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# CONFIG_IWLWIFI_P2P is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_APPLE_AIRPORT=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
# CONFIG_RTL8723AE is not set
CONFIG_RTL8192CU=m
CONFIG_RTL8192C_COMMON=m
# CONFIG_WL_TI is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
# CONFIG_MWIFIEX_USB is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
CONFIG_VMXNET3=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_CYAPA is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
CONFIG_TOUCHSCREEN_DYNAPRO=m
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_ILI210X is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=m
# CONFIG_TOUCHSCREEN_MMS114 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_PIXCIR=m
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_ST1232=m
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_MPU3050=m
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_INPUT_ADXL34X is not set
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
# CONFIG_DEVKMEM is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_PMACZILOG=m
# CONFIG_SERIAL_PMACZILOG_TTYS is not set
CONFIG_SERIAL_ICOM=m
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_OF_PLATFORM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_CONSOLE=y
# CONFIG_HVC_OLD_HVSI is not set
CONFIG_HVC_OPAL=y
CONFIG_HVC_RTAS=y
# CONFIG_HVC_UDBG is not set
CONFIG_HVCS=m
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IBM_BSR=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_PSERIES=y
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
CONFIG_I2C_MPC=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_TS5500 is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_VX855 is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
#
# USB GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ALIM7101_WDT=m
# CONFIG_I6300ESB_WDT is not set
CONFIG_WATCHDOG_RTAS=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_LPC_ICH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_VX855=m
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_TTPCI_EEPROM is not set
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
#
# Supported MMC/SDIO adapters
#
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
#
# Customise DVB Frontends
#
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_UNINORTH=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_UMS is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_VMWGFX=m
# CONFIG_DRM_VMWGFX_FBCON is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_OF_DISPLAY_TIMING is not set
# CONFIG_OF_VIDEOMODE is not set
CONFIG_HDMI=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
# CONFIG_FB_MATROX_I2C is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
CONFIG_FB_VOODOO1=m
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_UDL=m
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_GOLDFISH is not set
CONFIG_FB_VIRTUAL=m
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_FB_SSD1307 is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_FM801=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=4096
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_PPC=y
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y
CONFIG_SND_AOA=m
CONFIG_SND_AOA_FABRIC_LAYOUT=m
CONFIG_SND_AOA_ONYX=m
CONFIG_SND_AOA_TAS=m
CONFIG_SND_AOA_TOONIE=m
CONFIG_SND_AOA_SOUNDBUS=m
CONFIG_SND_AOA_SOUNDBUS_I2S=m
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_FIREWIRE_SPEAKERS=m
CONFIG_SND_ISIGHT=m
# CONFIG_SND_SCS1X is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=y
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
# CONFIG_HID_ICADE is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
# CONFIG_HID_LENOVO_TPKBD is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PRIMAX=m
# CONFIG_HID_PS3REMOTE is not set
CONFIG_HID_ROCCAT=m
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=m
# CONFIG_HID_THINGM is not set
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_WIIMOTE_EXT=y
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_SL811_CS is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_ZTE is not set
CONFIG_USB_SERIAL_SSU100=m
# CONFIG_USB_SERIAL_QT2 is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HSIC_USB3503 is not set
#
# USB Physical Layer drivers
#
# CONFIG_OMAP_USB3 is not set
# CONFIG_OMAP_CONTROL_USB is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_RCAR_PHY is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_OF_ESDHC is not set
# CONFIG_MMC_SDHCI_OF_HLWD is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_QIB=m
CONFIG_INFINIBAND_EHCA=m
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
# CONFIG_INFINIBAND_OCRDMA is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD8131=m
CONFIG_EDAC_AMD8111=m
CONFIG_EDAC_CPC925=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
# CONFIG_RTC_DRV_DS2404 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_RTC_DRV_SNVS is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_DW_DMAC is not set
# CONFIG_TIMB_DMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
CONFIG_R8712U=m
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_DX_SEP is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_WLAGS49_H2 is not set
# CONFIG_WLAGS49_H25 is not set
# CONFIG_FB_SM7XX is not set
CONFIG_CRYSTALHD=m
# CONFIG_FB_XGI is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
CONFIG_STAGING_MEDIA=y
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_CSR_WIFI is not set
CONFIG_NET_VENDOR_SILICOM=y
# CONFIG_SBYPASS is not set
# CONFIG_BPCTL is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
# CONFIG_FIREWIRE_SERIAL is not set
#
# Hardware Spinlock drivers
#
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
CONFIG_OF_IOMMU=y
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
# CONFIG_IPACK_BUS is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
# CONFIG_EXOFS_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_CEPH_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB2 is not set
CONFIG_CIFS_FSCACHE=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_LRU_CACHE=m
CONFIG_AVERAGE=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_UPROBE_EVENT is not set
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_TEST_KSTRTOX=y
CONFIG_PPC_DISABLE_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_HCALL_STATS is not set
CONFIG_PPC_EMULATED_STATS=y
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
CONFIG_MSI_BITMAP_SELFTEST=y
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_STRICT_DEVMEM=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_KEYS_COMPAT=y
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_PPC is not set
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_NX is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_BOOK3S_HANDLER=y
CONFIG_KVM_BOOK3S_64_HANDLER=y
CONFIG_KVM_BOOK3S_PR=y
CONFIG_KVM_BOOK3S_64=m
# CONFIG_KVM_BOOK3S_64_HV is not set
CONFIG_KVM_BOOK3S_64_PR=y
CONFIG_VHOST_NET=m
# CONFIG_TCM_VHOST is not set
^ permalink raw reply
* [PATCH 0/3] rapidio: changes to enumeration/discovery
From: Alexandre Bounine @ 2013-04-24 14:31 UTC (permalink / raw)
To: Andrew Morton, linux-kernel, linuxppc-dev
Cc: Micha Nelissen, Andre van Herk, Alexandre Bounine
Systems that use RapidIO fabric may need to implement their own enumeration
and discovery methods which are better suitable for needs of a target
application.
The following set of patches is intended to simplify process of introduction of
new RapidIO fabric enumeration/discovery methods.
The first patch offers ability to add new RapidIO enumeration/discovery methods
using kernel configuration options or loadable modules. The new configuration
option mechanism allows to select built-in or modular enumeration/discovery
method from the list of existing methods or use external module(s).
This patch also updates the currently existing enumeration/discovery code to be
used as built-in or modular method. The corresponding configuration option is
named "Basic enumeration/discovery" method. This is the only one built-in
configuration option available today but new methods are expected to be
introduced after adoption of provided patches.
The second patch address a long time complaint of RapidIO subsystem users
regarding fabric enumeration/discovery start sequence. Existing implementation
offers only a boot-time enumeration/discovery start which requires synchronized
boot of all endpoints in RapidIO network. While it works for small closed
configurations with limited number of endpoints, using this approach in systems
with large number of endpoints is quite challenging.
To eliminate requirement for synchronized start the second patch introduces
RapidIO enumeration/discovery start from user space.
For compatibility with the existing RapidIO subsystem implementation, automatic
boot time enumeration/discovery start can be configured in by selecting
CONFIG_RAPIDIO_ENUM_AUTO option.
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@Prodrive.nl>
Cc: Micha Nelissen <micha.nelissen@Prodrive.nl>
Alexandre Bounine (3):
rapidio: make enumeration/discovery configurable
rapidio: add enumeration/discovery start from user space
rapidio: documentation update for enumeration changes
Documentation/rapidio/rapidio.txt | 137 ++++++++++++++++++++--
Documentation/rapidio/sysfs.txt | 17 +++
drivers/rapidio/Kconfig | 28 +++++
drivers/rapidio/Makefile | 3 +-
drivers/rapidio/rio-driver.c | 8 ++
drivers/rapidio/rio-scan.c | 195 ++++++++++--------------------
drivers/rapidio/rio-sysfs.c | 45 +++++++
drivers/rapidio/rio.c | 234 ++++++++++++++++++++++++++++++++++++-
drivers/rapidio/rio.h | 12 ++-
include/linux/rio.h | 17 +++
include/linux/rio_drv.h | 1 +
11 files changed, 548 insertions(+), 149 deletions(-)
--
1.7.8.4
^ permalink raw reply
* [PATCH 2/3] rapidio: add enumeration/discovery start from user space
From: Alexandre Bounine @ 2013-04-24 14:31 UTC (permalink / raw)
To: Andrew Morton, linux-kernel, linuxppc-dev
Cc: Micha Nelissen, Andre van Herk, Alexandre Bounine
In-Reply-To: <1366813919-13766-1-git-send-email-alexandre.bounine@idt.com>
Add RapidIO enumeration/discovery start from user space.
User space start allows to defer RapidIO fabric scan until the moment when all
participating endpoints are initialized avoiding mandatory synchronized start
of all endpoints (which may be challenging in systems with large number of
RapidIO endpoints).
For compatibility with the existing RapidIO subsystem implementation, automatic
boot time enumeration/discovery start can be configured in by selecting
CONFIG_RAPIDIO_ENUM_AUTO option.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@Prodrive.nl>
Cc: Micha Nelissen <micha.nelissen@Prodrive.nl>
---
drivers/rapidio/Kconfig | 9 ++++++++
drivers/rapidio/rio-driver.c | 1 +
drivers/rapidio/rio-scan.c | 24 +++++++++++++++++++--
drivers/rapidio/rio-sysfs.c | 45 ++++++++++++++++++++++++++++++++++++++++++
drivers/rapidio/rio.c | 26 ++++++++++++++++++++++-
drivers/rapidio/rio.h | 2 +
include/linux/rio.h | 9 ++++++-
7 files changed, 109 insertions(+), 7 deletions(-)
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index e392cab..8b7f92d 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -66,4 +66,13 @@ config RAPIDIO_ENUM_BASIC
endchoice
+config RAPIDIO_ENUM_AUTO
+ bool "Automatic RapidIO enumeration/discovery start"
+ depends on RAPIDIO && RAPIDIO_ENUM_BASIC = y
+ help
+ Say Y if you want RapidIO subsystem to start fabric enumeration and
+ discovery automatically during kernel initialization time.
+ If you are unsure, say N here. You will be able to start RapidIO
+ fabric enumeration or discovery later by a user request.
+
source "drivers/rapidio/switches/Kconfig"
diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c
index 55850bb..a0c8755 100644
--- a/drivers/rapidio/rio-driver.c
+++ b/drivers/rapidio/rio-driver.c
@@ -207,6 +207,7 @@ struct bus_type rio_bus_type = {
.name = "rapidio",
.match = rio_match_bus,
.dev_attrs = rio_dev_attrs,
+ .bus_attrs = rio_bus_attrs,
.probe = rio_device_probe,
.remove = rio_device_remove,
};
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 33fc332..3e371b1 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -1134,19 +1134,30 @@ static void rio_pw_enable(struct rio_mport *port, int enable)
/**
* rio_enum_mport- Start enumeration through a master port
* @mport: Master port to send transactions
+ * @flags: Enumeration control flags
*
* Starts the enumeration process. If somebody has enumerated our
* master port device, then give up. If not and we have an active
* link, then start recursive peer enumeration. Returns %0 if
* enumeration succeeds or %-EBUSY if enumeration fails.
*/
-int rio_enum_mport(struct rio_mport *mport)
+int rio_enum_mport(struct rio_mport *mport, u32 flags)
{
struct rio_net *net = NULL;
int rc = 0;
printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id,
mport->name);
+
+ /*
+ * To avoid multiple start requests (repeat enumeration is not supported
+ * by this method) check if enumeration/discovery was performed for this
+ * mport: if mport was added into the list of mports for a net exit
+ * with error.
+ */
+ if (mport->nnode.next || mport->nnode.prev)
+ return -EBUSY;
+
/* If somebody else enumerated our master port device, bail. */
if (rio_enum_host(mport) < 0) {
printk(KERN_INFO
@@ -1236,14 +1247,16 @@ static void rio_build_route_tables(struct rio_net *net)
/**
* rio_disc_mport- Start discovery through a master port
* @mport: Master port to send transactions
+ * @flags: discovery control flags
*
* Starts the discovery process. If we have an active link,
- * then wait for the signal that enumeration is complete.
+ * then wait for the signal that enumeration is complete (if wait
+ * is allowed).
* When enumeration completion is signaled, start recursive
* peer discovery. Returns %0 if discovery succeeds or %-EBUSY
* on failure.
*/
-int rio_disc_mport(struct rio_mport *mport)
+int rio_disc_mport(struct rio_mport *mport, u32 flags)
{
struct rio_net *net = NULL;
unsigned long to_end;
@@ -1253,6 +1266,11 @@ int rio_disc_mport(struct rio_mport *mport)
/* If master port has an active link, allocate net and discover peers */
if (rio_mport_is_active(mport)) {
+ if (rio_enum_complete(mport))
+ goto enum_done;
+ else if (flags & RIO_SCAN_ENUM_NO_WAIT)
+ return -EAGAIN;
+
pr_debug("RIO: wait for enumeration to complete...\n");
to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ;
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index 4dbe360..66d4acd 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -285,3 +285,48 @@ void rio_remove_sysfs_dev_files(struct rio_dev *rdev)
rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE);
}
}
+
+static ssize_t bus_scan_store(struct bus_type *bus, const char *buf,
+ size_t count)
+{
+ long val;
+ struct rio_mport *port = NULL;
+ int rc;
+
+ if (kstrtol(buf, 0, &val) < 0)
+ return -EINVAL;
+
+ if (val == RIO_MPORT_ANY) {
+ rc = rio_init_mports();
+ goto exit;
+ }
+
+ if (val < 0 || val >= RIO_MAX_MPORTS)
+ return -EINVAL;
+
+ port = rio_find_mport((int)val);
+
+ if (!port) {
+ pr_debug("RIO: %s: mport_%d not available\n",
+ __func__, (int)val);
+ return -EINVAL;
+ }
+
+ if (!port->nscan)
+ return -EINVAL;
+
+ if (port->host_deviceid >= 0)
+ rc = port->nscan->enumerate(port, 0);
+ else
+ rc = port->nscan->discover(port, RIO_SCAN_ENUM_NO_WAIT);
+exit:
+ if (!rc)
+ rc = count;
+
+ return rc;
+}
+
+struct bus_attribute rio_bus_attrs[] = {
+ __ATTR(scan, (S_IWUSR|S_IWGRP), NULL, bus_scan_store),
+ __ATTR_NULL
+};
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index e36628a..3bfbcec 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -1382,6 +1382,26 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg);
#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
/**
+ * rio_find_mport - find RIO mport by its ID
+ * @mport_id: number (ID) of mport device
+ *
+ * Given a RIO mport number, the desired mport is located
+ * in the global list of mports. If the mport is found, a pointer to its
+ * data structure is returned. If no mport is found, %NULL is returned.
+ */
+struct rio_mport *rio_find_mport(int mport_id)
+{
+ struct rio_mport *port = NULL;
+
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->id == mport_id)
+ return port;
+ }
+
+ return NULL;
+}
+
+/**
* rio_register_scan - enumeration/discovery method registration interface
* @mport_id: mport device ID for which fabric scan routine has to be set
* (RIO_MPORT_ANY = set for all available mports)
@@ -1470,7 +1490,7 @@ static void disc_work_handler(struct work_struct *_work)
work = container_of(_work, struct rio_disc_work, work);
pr_debug("RIO: discovery work for mport %d %s\n",
work->mport->id, work->mport->name);
- work->mport->nscan->discover(work->mport);
+ work->mport->nscan->discover(work->mport, 0);
}
int rio_init_mports(void)
@@ -1489,7 +1509,7 @@ int rio_init_mports(void)
list_for_each_entry(port, &rio_mports, node) {
if (port->host_deviceid >= 0) {
if (port->nscan)
- port->nscan->enumerate(port);
+ port->nscan->enumerate(port, 0);
} else
n++;
}
@@ -1539,7 +1559,9 @@ no_disc:
return 0;
}
+#ifdef CONFIG_RAPIDIO_ENUM_AUTO
device_initcall_sync(rio_init_mports);
+#endif
static int hdids[RIO_MAX_MPORTS + 1];
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index d44e7e6..bdd339e 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -45,9 +45,11 @@ extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid,
extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops);
extern int rio_unregister_scan(int mport_id);
extern void rio_attach_device(struct rio_dev *rdev);
+extern struct rio_mport *rio_find_mport(int mport_id);
/* Structures internal to the RIO core code */
extern struct device_attribute rio_dev_attrs[];
+extern struct bus_attribute rio_bus_attrs[];
extern spinlock_t rio_global_list_lock;
extern struct rio_switch_ops __start_rio_switch_ops[];
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 30a48a8..a29a35b 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -266,6 +266,11 @@ struct rio_mport {
struct rio_scan *nscan;
};
+/*
+ * Enumeration/discovery control flags
+ */
+#define RIO_SCAN_ENUM_NO_WAIT 0x00000001 /* Do not wait for enum completed */
+
struct rio_id_table {
u16 start; /* logical minimal id */
u32 max; /* max number of IDs in table */
@@ -468,8 +473,8 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev)
* @discover: Callback to perform RapidIO fabric discovery.
*/
struct rio_scan {
- int (*enumerate)(struct rio_mport *mport);
- int (*discover)(struct rio_mport *mport);
+ int (*enumerate)(struct rio_mport *mport, u32 flags);
+ int (*discover)(struct rio_mport *mport, u32 flags);
};
/* Architecture and hardware-specific functions */
--
1.7.8.4
^ permalink raw reply related
* [PATCH 3/3] rapidio: documentation update for enumeration changes
From: Alexandre Bounine @ 2013-04-24 14:31 UTC (permalink / raw)
To: Andrew Morton, linux-kernel, linuxppc-dev
Cc: Micha Nelissen, Andre van Herk, Alexandre Bounine
In-Reply-To: <1366813919-13766-1-git-send-email-alexandre.bounine@idt.com>
Update RapidIO documentation to reflect changes made to enumeration/discovery
build configuration and user space triggering mechanism.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@Prodrive.nl>
Cc: Micha Nelissen <micha.nelissen@Prodrive.nl>
---
Documentation/rapidio/rapidio.txt | 137 ++++++++++++++++++++++++++++++++++---
Documentation/rapidio/sysfs.txt | 17 +++++
2 files changed, 143 insertions(+), 11 deletions(-)
diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt
index c75694b..d97576f 100644
--- a/Documentation/rapidio/rapidio.txt
+++ b/Documentation/rapidio/rapidio.txt
@@ -79,20 +79,64 @@ master port that is used to communicate with devices within the network.
In order to initialize the RapidIO subsystem, a platform must initialize and
register at least one master port within the RapidIO network. To register mport
within the subsystem controller driver initialization code calls function
-rio_register_mport() for each available master port. After all active master
-ports are registered with a RapidIO subsystem, the rio_init_mports() routine
-is called to perform enumeration and discovery.
+rio_register_mport() for each available master port.
-In the current PowerPC-based implementation a subsys_initcall() is specified to
-perform controller initialization and mport registration. At the end it directly
-calls rio_init_mports() to execute RapidIO enumeration and discovery.
+RapidIO subsystem uses subsys_initcall() or device_initcall() to perform
+controller initialization (depending on controller device type).
+
+After all active master ports are registered with a RapidIO subsystem,
+an enumeration and/or discovery routine may be called automatically or
+by user-space command.
4. Enumeration and Discovery
----------------------------
-When rio_init_mports() is called it scans a list of registered master ports and
-calls an enumeration or discovery routine depending on the configured role of a
-master port: host or agent.
+4.1 Overview
+------------
+
+RapidIO subsystem configuration options allow users to specify enumeration and
+discovery methods as built-in components or loadable modules.
+For built-in options only one method can be selected for all mports in a system.
+Selecting a modular build option for enumeration/discovery allows to use
+different enumerators attached to available mport device individually.
+
+Depending on selected enumeration/discovery build configuration, there are
+several methods to initiate enumeration and/or discovery process:
+
+ (a) Built-in enumeration and discovery process can be started automatically
+ during kernel initialization time. This is the original method used since
+ introduction of RapidIO subsystem. This method relies on kernel initcall that
+ calls rio_init_mports() routine after all available mports have been
+ registered. When automatic start of enumeration/discovery is used a user has
+ to ensure that all discovering endpoints are started before the enumerating
+ endpoint and are waiting for enumeration to be completed.
+ Configuration option CONFIG_RAPIDIO_DISC_TIMEOUT defines time that discovering
+ endpoint waits for enumeration to be completed. If the specified timeout
+ expires the discovery process is terminated without obtaining RapidIO network
+ information. NOTE: a timed out discovery process may be restarted later using
+ a user-space command as it is described later if the given endpoint was
+ enumerated successfully.
+
+ (b) Built-in enumeration and discovery process can be started by a command
+ from user space. This initiation method provides more freedom for system
+ startup compared to the option (a) above. After all participating endpoints
+ have been successfully booted, an enumeration process shall be started first
+ by issuing a user-space command, as soon as enumeration is completed
+ a discovery process can be started on all remaining endpoints.
+ Configuration option CONFIG_RAPIDIO_ENUM_AUTO defines which method will be
+ used to start a built-in enumeration and discovery process.
+
+ (c) Modular enumeration and discovery process can be started by a command from
+ user space. After an enumeration/discovery module is loaded, a network scan
+ process can be started by issuing a user-space command.
+ Similar to the option (b) above, an enumerator has to be started first.
+
+ (d) Modular enumeration and discovery process can be started by a module
+ initialization routine. As in the cases above an enumerating module shall be
+ loaded first.
+
+When a network scan process is started it calls an enumeration or discovery
+routine depending on the configured role of a master port: host or agent.
Enumeration is performed by a master port if it is configured as a host port by
assigning a host device ID greater than or equal to zero. A host device ID is
@@ -104,8 +148,57 @@ for it.
The enumeration and discovery routines use RapidIO maintenance transactions
to access the configuration space of devices.
-The enumeration process is implemented according to the enumeration algorithm
-outlined in the RapidIO Interconnect Specification: Annex I [1].
+4.2 Automatic Start of Enumeration and Discovery
+------------------------------------------------
+
+Automatic enumeration/discovery start method is applicable only to built-in
+enumeration/discovery RapidIO configuration selection. To enable automatic
+enumeration/discovery start set CONFIG_RAPIDIO_ENUM_AUTO=y.
+
+This configuration requires synchronized start of all RapidIO endpoints that
+form a network which will be enumerated/discovered. Discovering endpoints have
+to be started before an enumeration starts to ensure that all RapidIO
+controllers have been initialized and are ready to be discovered. Configuration
+parameter CONFIG_RAPIDIO_DISC_TIMEOUT defines time (in seconds) which
+a discovering endpoint will wait for enumeration to be completed.
+
+When automatic enumeration/discovery start method is selected RapidIO subsystem
+core uses device_initcall_sync() to invoke rio_init_mports() routine to perform
+enumeration or discovery for all known mport devices.
+
+Depending on RapidIO network size and configuration this automatic
+enumeration/discovery start method may be difficult to use due to the
+requirement for synchronized start of all endpoints.
+
+4.3 User-space Start of Enumeration and Discovery
+-------------------------------------------------
+
+User-space start of enumeration and discovery can be used with built-in and
+modular build configurations. For user-space controlled start RapidIO subsystem
+creates the sysfs write-only attribute file '/sys/bus/rapidio/scan'. To initiate
+an enumeration or discovery process on specific mport device, a user needs to
+write mport_ID (not RapidIO destination ID) into that file. The mport_ID is a
+sequential number (0 ... RIO_MAX_MPORTS) assigned during mport device
+registration. For example for machine with single RapidIO controller, mport_ID
+for that controller always will be 0.
+
+To initiate RapidIO enumeration/discovery on all available mports a user may
+write '-1' (or RIO_MPORT_ANY) into the scan attribute file.
+
+4.4 Basic Enumeration Method
+----------------------------
+
+This is an original enumeration/discovery method which is available since
+first release of RapidIO subsystem code. The enumeration process is
+implemented according to the enumeration algorithm outlined in the RapidIO
+Interconnect Specification: Annex I [1].
+
+This method can be configured as built-in or loadable module. When used as a
+kernel module this method offers parameter "scan" witch allows to trigger the
+enumeration/discovery process from module initialization routine.
+
+This enumeration/discovery method can be started only once and does not support
+unloading if it is built as a module.
The enumeration process traverses the network using a recursive depth-first
algorithm. When a new device is found, the enumerator takes ownership of that
@@ -160,6 +253,28 @@ time period. If this wait time period expires before enumeration is completed,
an agent skips RapidIO discovery and continues with remaining kernel
initialization.
+4.5 Adding New Enumeration/Discovery Method
+-------------------------------------------
+
+RapidIO subsystem code organization allows addition of new enumeration/discovery
+methods as new configuration options without significant impact to to the core
+RapidIO code.
+
+RapidIO developers can add new enumeration/discovery methods as built-in code or
+loadable kernel modules. In case of built-in methods only one method may be
+configured in, having multiple built-in enumeration/discovery methods is not
+supported by mport role assignment mechanism.
+
+To be registered with RapidIO subsystem a new built-in method must provide
+global data structure named "rio_scan_ops" (see definition of 'struct rio_scan'
+in include/linux/rio.h file). Example of this structure is available in the
+existing implementation of basic RapidIO enumeration method (see rio-scan.c).
+
+If a new enumeration/discovery method is implemented as a module, its module
+initialization routine has to call rio_register_scan() routine to attach
+a loadable enumerator to a specified mport device. The basic enumerator
+implementation demonstrates this process as well.
+
5. References
-------------
diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.txt
index 97f71ce..c3b7d18 100644
--- a/Documentation/rapidio/sysfs.txt
+++ b/Documentation/rapidio/sysfs.txt
@@ -88,3 +88,20 @@ that exports additional attributes.
IDT_GEN2:
errlog - reads contents of device error log until it is empty.
+
+
+5. RapidIO Bus Attributes
+-------------------------
+
+RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-specific
+attribute:
+
+ scan - allows to trigger enumeration discovery process from user space. This
+ is write-only attribute. To initiate an enumeration or discovery
+ process on specific mport device, a user needs to write mport_ID (not
+ RapidIO destination ID) into this file. The mport_ID is a sequential
+ number (0 ... RIO_MAX_MPORTS) assigned to mport device. For example for
+ machine with single RapidIO controller, mport_ID for that controller
+ always will be 0. To initiate RapidIO enumeration/discovery on all
+ available mports a user must write '-1' (or RIO_MPORT_ANY) into this
+ attribute file.
--
1.7.8.4
^ permalink raw reply related
* [PATCH 1/3] rapidio: make enumeration/discovery configurable
From: Alexandre Bounine @ 2013-04-24 14:31 UTC (permalink / raw)
To: Andrew Morton, linux-kernel, linuxppc-dev
Cc: Micha Nelissen, Andre van Herk, Alexandre Bounine
In-Reply-To: <1366813919-13766-1-git-send-email-alexandre.bounine@idt.com>
Rework to implement RapidIO enumeration/discovery method selection
combined with ability to use enumeration/discovery as a kernel module.
This patch adds ability to introduce new RapidIO enumeration/discovery methods
using kernel configuration options or loadable modules. Configuration option
mechanism allows to select built-in or modular enumeration/discovery method from
the list of existing methods or use external modules.
If a modular enumeration/discovery is selected each RapidIO mport device can
have its own method attached to it.
The currently existing enumeration/discovery code was updated to be used
as built-in or modular method. This configuration option is named "Basic
enumeration/discovery" method.
Several common routines have been moved from rio-scan.c to make them available
to other enumeration methods and reduce number of exported symbols.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@Prodrive.nl>
Cc: Micha Nelissen <micha.nelissen@Prodrive.nl>
---
drivers/rapidio/Kconfig | 19 ++++
drivers/rapidio/Makefile | 3 +-
drivers/rapidio/rio-driver.c | 7 ++
drivers/rapidio/rio-scan.c | 171 +++++++++-------------------------
drivers/rapidio/rio.c | 212 +++++++++++++++++++++++++++++++++++++++++-
drivers/rapidio/rio.h | 10 ++-
include/linux/rio.h | 12 +++
include/linux/rio_drv.h | 1 +
8 files changed, 300 insertions(+), 135 deletions(-)
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 6194d35..e392cab 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -47,4 +47,23 @@ config RAPIDIO_DEBUG
If you are unsure about this, say N here.
+choice
+ prompt "Enumeration method"
+ depends on RAPIDIO
+ help
+ There are different enumeration and discovery mechanisms offered
+ for RapidIO subsystem. You may select single built-in method or
+ or any number of methods to be built as modules.
+ Selecting a built-in method disables use of loadable methods.
+
+ If unsure, select Basic built-in.
+
+config RAPIDIO_ENUM_BASIC
+ tristate "Basic"
+ help
+ This option includes basic RapidIO fabric enumeration and discovery
+ mechanism similar to one described in RapidIO specification Annex 1.
+
+endchoice
+
source "drivers/rapidio/switches/Kconfig"
diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile
index ec3fb81..3036702 100644
--- a/drivers/rapidio/Makefile
+++ b/drivers/rapidio/Makefile
@@ -1,7 +1,8 @@
#
# Makefile for RapidIO interconnect services
#
-obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o
+obj-y += rio.o rio-access.o rio-driver.o rio-sysfs.o
+obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o
obj-$(CONFIG_RAPIDIO) += switches/
obj-$(CONFIG_RAPIDIO) += devices/
diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c
index 0f4a53b..55850bb 100644
--- a/drivers/rapidio/rio-driver.c
+++ b/drivers/rapidio/rio-driver.c
@@ -164,6 +164,13 @@ void rio_unregister_driver(struct rio_driver *rdrv)
driver_unregister(&rdrv->driver);
}
+void rio_attach_device(struct rio_dev *rdev)
+{
+ rdev->dev.bus = &rio_bus_type;
+ rdev->dev.parent = &rio_bus;
+}
+EXPORT_SYMBOL_GPL(rio_attach_device);
+
/**
* rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure
* @dev: the standard device structure to match against
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index a965acd..33fc332 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -37,12 +37,8 @@
#include "rio.h"
-LIST_HEAD(rio_devices);
-
static void rio_init_em(struct rio_dev *rdev);
-DEFINE_SPINLOCK(rio_global_list_lock);
-
static int next_destid = 0;
static int next_comptag = 1;
@@ -327,127 +323,6 @@ static int rio_is_switch(struct rio_dev *rdev)
}
/**
- * rio_switch_init - Sets switch operations for a particular vendor switch
- * @rdev: RIO device
- * @do_enum: Enumeration/Discovery mode flag
- *
- * Searches the RIO switch ops table for known switch types. If the vid
- * and did match a switch table entry, then call switch initialization
- * routine to setup switch-specific routines.
- */
-static void rio_switch_init(struct rio_dev *rdev, int do_enum)
-{
- struct rio_switch_ops *cur = __start_rio_switch_ops;
- struct rio_switch_ops *end = __end_rio_switch_ops;
-
- while (cur < end) {
- if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
- pr_debug("RIO: calling init routine for %s\n",
- rio_name(rdev));
- cur->init_hook(rdev, do_enum);
- break;
- }
- cur++;
- }
-
- if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
- pr_debug("RIO: adding STD routing ops for %s\n",
- rio_name(rdev));
- rdev->rswitch->add_entry = rio_std_route_add_entry;
- rdev->rswitch->get_entry = rio_std_route_get_entry;
- rdev->rswitch->clr_table = rio_std_route_clr_table;
- }
-
- if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
- printk(KERN_ERR "RIO: missing routing ops for %s\n",
- rio_name(rdev));
-}
-
-/**
- * rio_add_device- Adds a RIO device to the device model
- * @rdev: RIO device
- *
- * Adds the RIO device to the global device list and adds the RIO
- * device to the RIO device list. Creates the generic sysfs nodes
- * for an RIO device.
- */
-static int rio_add_device(struct rio_dev *rdev)
-{
- int err;
-
- err = device_add(&rdev->dev);
- if (err)
- return err;
-
- spin_lock(&rio_global_list_lock);
- list_add_tail(&rdev->global_list, &rio_devices);
- spin_unlock(&rio_global_list_lock);
-
- rio_create_sysfs_dev_files(rdev);
-
- return 0;
-}
-
-/**
- * rio_enable_rx_tx_port - enable input receiver and output transmitter of
- * given port
- * @port: Master port associated with the RIO network
- * @local: local=1 select local port otherwise a far device is reached
- * @destid: Destination ID of the device to check host bit
- * @hopcount: Number of hops to reach the target
- * @port_num: Port (-number on switch) to enable on a far end device
- *
- * Returns 0 or 1 from on General Control Command and Status Register
- * (EXT_PTR+0x3C)
- */
-inline int rio_enable_rx_tx_port(struct rio_mport *port,
- int local, u16 destid,
- u8 hopcount, u8 port_num) {
-#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
- u32 regval;
- u32 ext_ftr_ptr;
-
- /*
- * enable rx input tx output port
- */
- pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
- "%d, port_num = %d)\n", local, destid, hopcount, port_num);
-
- ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
-
- if (local) {
- rio_local_read_config_32(port, ext_ftr_ptr +
- RIO_PORT_N_CTL_CSR(0),
- ®val);
- } else {
- if (rio_mport_read_config_32(port, destid, hopcount,
- ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0)
- return -EIO;
- }
-
- if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
- /* serial */
- regval = regval | RIO_PORT_N_CTL_EN_RX_SER
- | RIO_PORT_N_CTL_EN_TX_SER;
- } else {
- /* parallel */
- regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
- | RIO_PORT_N_CTL_EN_TX_PAR;
- }
-
- if (local) {
- rio_local_write_config_32(port, ext_ftr_ptr +
- RIO_PORT_N_CTL_CSR(0), regval);
- } else {
- if (rio_mport_write_config_32(port, destid, hopcount,
- ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
- return -EIO;
- }
-#endif
- return 0;
-}
-
-/**
* rio_setup_device- Allocates and sets up a RIO device
* @net: RIO network
* @port: Master port to send transactions
@@ -587,8 +462,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
rdev->destid);
}
- rdev->dev.bus = &rio_bus_type;
- rdev->dev.parent = &rio_bus;
+ rio_attach_device(rdev);
device_initialize(&rdev->dev);
rdev->dev.release = rio_release_dev;
@@ -1421,3 +1295,46 @@ enum_done:
bail:
return -EBUSY;
}
+
+struct rio_scan rio_scan_ops = {
+ .enumerate = rio_enum_mport,
+ .discover = rio_disc_mport,
+};
+
+
+#ifdef MODULE
+
+static bool scan;
+module_param(scan, bool, 0);
+MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery "
+ "(default = 1)");
+
+/**
+ * rio_basic_attach:
+ *
+ * When this enumeration/discovery method is loaded as a module this function
+ * registers its specific enumeration and discover routines for all available
+ * RapidIO mport devices. The "scan" command line parameter controls ability of
+ * the module to start RapidIO enumeration/discovery automatically.
+ *
+ * Returns 0 for success or -EIO if unable to register itself.
+ *
+ * This enumeration/discovery method cannot be unloaded and therefore does not
+ * provide a matching cleanup_module routine.
+ */
+
+int __init rio_basic_attach(void)
+{
+ if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops))
+ return -EIO;
+ if (scan)
+ rio_init_mports();
+ return 0;
+}
+
+module_init(rio_basic_attach);
+
+MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery");
+MODULE_LICENSE("GPL");
+
+#endif /* MODULE */
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index d553b5d..e36628a 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -31,6 +31,9 @@
#include "rio.h"
+LIST_HEAD(rio_devices);
+DEFINE_SPINLOCK(rio_global_list_lock);
+
static LIST_HEAD(rio_mports);
static unsigned char next_portid;
static DEFINE_SPINLOCK(rio_mmap_lock);
@@ -53,6 +56,32 @@ u16 rio_local_get_device_id(struct rio_mport *port)
}
/**
+ * rio_add_device- Adds a RIO device to the device model
+ * @rdev: RIO device
+ *
+ * Adds the RIO device to the global device list and adds the RIO
+ * device to the RIO device list. Creates the generic sysfs nodes
+ * for an RIO device.
+ */
+int rio_add_device(struct rio_dev *rdev)
+{
+ int err;
+
+ err = device_add(&rdev->dev);
+ if (err)
+ return err;
+
+ spin_lock(&rio_global_list_lock);
+ list_add_tail(&rdev->global_list, &rio_devices);
+ spin_unlock(&rio_global_list_lock);
+
+ rio_create_sysfs_dev_files(rdev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_add_device);
+
+/**
* rio_request_inb_mbox - request inbound mailbox service
* @mport: RIO master port from which to allocate the mailbox resource
* @dev_id: Device specific pointer to pass on event
@@ -489,6 +518,7 @@ rio_mport_get_physefb(struct rio_mport *port, int local,
return ext_ftr_ptr;
}
+EXPORT_SYMBOL_GPL(rio_mport_get_physefb);
/**
* rio_get_comptag - Begin or continue searching for a RIO device by component tag
@@ -521,6 +551,7 @@ exit:
spin_unlock(&rio_global_list_lock);
return rdev;
}
+EXPORT_SYMBOL_GPL(rio_get_comptag);
/**
* rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port.
@@ -545,6 +576,107 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
regval);
return 0;
}
+EXPORT_SYMBOL_GPL(rio_set_port_lockout);
+
+/**
+ * rio_switch_init - Sets switch operations for a particular vendor switch
+ * @rdev: RIO device
+ * @do_enum: Enumeration/Discovery mode flag
+ *
+ * Searches the RIO switch ops table for known switch types. If the vid
+ * and did match a switch table entry, then call switch initialization
+ * routine to setup switch-specific routines.
+ */
+void rio_switch_init(struct rio_dev *rdev, int do_enum)
+{
+ struct rio_switch_ops *cur = __start_rio_switch_ops;
+ struct rio_switch_ops *end = __end_rio_switch_ops;
+
+ while (cur < end) {
+ if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
+ pr_debug("RIO: calling init routine for %s\n",
+ rio_name(rdev));
+ cur->init_hook(rdev, do_enum);
+ break;
+ }
+ cur++;
+ }
+
+ if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
+ pr_debug("RIO: adding STD routing ops for %s\n",
+ rio_name(rdev));
+ rdev->rswitch->add_entry = rio_std_route_add_entry;
+ rdev->rswitch->get_entry = rio_std_route_get_entry;
+ rdev->rswitch->clr_table = rio_std_route_clr_table;
+ }
+
+ if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
+ printk(KERN_ERR "RIO: missing routing ops for %s\n",
+ rio_name(rdev));
+}
+EXPORT_SYMBOL_GPL(rio_switch_init);
+
+/**
+ * rio_enable_rx_tx_port - enable input receiver and output transmitter of
+ * given port
+ * @port: Master port associated with the RIO network
+ * @local: local=1 select local port otherwise a far device is reached
+ * @destid: Destination ID of the device to check host bit
+ * @hopcount: Number of hops to reach the target
+ * @port_num: Port (-number on switch) to enable on a far end device
+ *
+ * Returns 0 or 1 from on General Control Command and Status Register
+ * (EXT_PTR+0x3C)
+ */
+int rio_enable_rx_tx_port(struct rio_mport *port,
+ int local, u16 destid,
+ u8 hopcount, u8 port_num)
+{
+#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
+ u32 regval;
+ u32 ext_ftr_ptr;
+
+ /*
+ * enable rx input tx output port
+ */
+ pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
+ "%d, port_num = %d)\n", local, destid, hopcount, port_num);
+
+ ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
+
+ if (local) {
+ rio_local_read_config_32(port, ext_ftr_ptr +
+ RIO_PORT_N_CTL_CSR(0),
+ ®val);
+ } else {
+ if (rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), ®val) < 0)
+ return -EIO;
+ }
+
+ if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
+ /* serial */
+ regval = regval | RIO_PORT_N_CTL_EN_RX_SER
+ | RIO_PORT_N_CTL_EN_TX_SER;
+ } else {
+ /* parallel */
+ regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
+ | RIO_PORT_N_CTL_EN_TX_PAR;
+ }
+
+ if (local) {
+ rio_local_write_config_32(port, ext_ftr_ptr +
+ RIO_PORT_N_CTL_CSR(0), regval);
+ } else {
+ if (rio_mport_write_config_32(port, destid, hopcount,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
+ return -EIO;
+ }
+#endif
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port);
+
/**
* rio_chk_dev_route - Validate route to the specified device.
@@ -610,6 +742,7 @@ rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount)
return 0;
}
+EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access);
/**
* rio_chk_dev_access - Validate access to the specified device.
@@ -941,6 +1074,7 @@ rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
return RIO_GET_BLOCK_ID(reg_val);
}
}
+EXPORT_SYMBOL_GPL(rio_mport_get_efb);
/**
* rio_mport_get_feature - query for devices' extended features
@@ -997,6 +1131,7 @@ rio_mport_get_feature(struct rio_mport * port, int local, u16 destid,
return 0;
}
+EXPORT_SYMBOL_GPL(rio_mport_get_feature);
/**
* rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did
@@ -1246,6 +1381,67 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg);
#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+/**
+ * rio_register_scan - enumeration/discovery method registration interface
+ * @mport_id: mport device ID for which fabric scan routine has to be set
+ * (RIO_MPORT_ANY = set for all available mports)
+ * @scan_ops: enumeration/discovery control structure
+ *
+ * Assigns enumeration or discovery method to the specified mport device (or all
+ * available mports if RIO_MPORT_ANY is specified).
+ * Returns error if the mport already has an enumerator attached to it.
+ * In case of RIO_MPORT_ANY ignores ports with valid scan routines and returns
+ * an error if was unable to find at least one available mport.
+ */
+int rio_register_scan(int mport_id, struct rio_scan *scan_ops)
+{
+ struct rio_mport *port;
+ int rc = -EBUSY;
+
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->id == mport_id || mport_id == RIO_MPORT_ANY) {
+ if (port->nscan && mport_id == RIO_MPORT_ANY)
+ continue;
+ else if (port->nscan)
+ break;
+
+ port->nscan = scan_ops;
+ rc = 0;
+
+ if (mport_id != RIO_MPORT_ANY)
+ break;
+ }
+ }
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_register_scan);
+
+/**
+ * rio_unregister_scan - removes enumeration/discovery method from mport
+ * @mport_id: mport device ID for which fabric scan routine has to be
+ * unregistered (RIO_MPORT_ANY = set for all available mports)
+ *
+ * Removes enumeration or discovery method assigned to the specified mport
+ * device (or all available mports if RIO_MPORT_ANY is specified).
+ */
+int rio_unregister_scan(int mport_id)
+{
+ struct rio_mport *port;
+
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->id == mport_id || mport_id == RIO_MPORT_ANY) {
+ if (port->nscan)
+ port->nscan = NULL;
+ if (mport_id != RIO_MPORT_ANY)
+ break;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_unregister_scan);
+
static void rio_fixup_device(struct rio_dev *dev)
{
}
@@ -1274,7 +1470,7 @@ static void disc_work_handler(struct work_struct *_work)
work = container_of(_work, struct rio_disc_work, work);
pr_debug("RIO: discovery work for mport %d %s\n",
work->mport->id, work->mport->name);
- rio_disc_mport(work->mport);
+ work->mport->nscan->discover(work->mport);
}
int rio_init_mports(void)
@@ -1291,9 +1487,10 @@ int rio_init_mports(void)
* on any of the registered mports.
*/
list_for_each_entry(port, &rio_mports, node) {
- if (port->host_deviceid >= 0)
- rio_enum_mport(port);
- else
+ if (port->host_deviceid >= 0) {
+ if (port->nscan)
+ port->nscan->enumerate(port);
+ } else
n++;
}
@@ -1323,7 +1520,7 @@ int rio_init_mports(void)
n = 0;
list_for_each_entry(port, &rio_mports, node) {
- if (port->host_deviceid < 0) {
+ if (port->host_deviceid < 0 && port->nscan) {
work[n].mport = port;
INIT_WORK(&work[n].work, disc_work_handler);
queue_work(rio_wq, &work[n].work);
@@ -1362,6 +1559,9 @@ static int rio_hdid_setup(char *str)
__setup("riohdid=", rio_hdid_setup);
+/* Enumerator structure that links built-in enumerator */
+extern struct rio_scan __weak rio_scan_ops;
+
int rio_register_mport(struct rio_mport *port)
{
if (next_portid >= RIO_MAX_MPORTS) {
@@ -1371,6 +1571,7 @@ int rio_register_mport(struct rio_mport *port)
port->id = next_portid++;
port->host_deviceid = rio_get_hdid(port->id);
+ port->nscan = &rio_scan_ops;
list_add_tail(&port->node, &rio_mports);
return 0;
}
@@ -1386,3 +1587,4 @@ EXPORT_SYMBOL_GPL(rio_request_inb_mbox);
EXPORT_SYMBOL_GPL(rio_release_inb_mbox);
EXPORT_SYMBOL_GPL(rio_request_outb_mbox);
EXPORT_SYMBOL_GPL(rio_release_outb_mbox);
+EXPORT_SYMBOL_GPL(rio_init_mports);
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index b1af414..d44e7e6 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -15,6 +15,7 @@
#include <linux/rio.h>
#define RIO_MAX_CHK_RETRY 3
+#define RIO_MPORT_ANY (-1)
/* Functions internal to the RIO core code */
@@ -27,8 +28,6 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid,
u8 hopcount);
extern int rio_create_sysfs_dev_files(struct rio_dev *rdev);
-extern int rio_enum_mport(struct rio_mport *mport);
-extern int rio_disc_mport(struct rio_mport *mport);
extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid,
u8 hopcount, u16 table, u16 route_destid,
u8 route_port);
@@ -39,6 +38,13 @@ extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid,
u8 hopcount, u16 table);
extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock);
extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from);
+extern int rio_add_device(struct rio_dev *rdev);
+extern void rio_switch_init(struct rio_dev *rdev, int do_enum);
+extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid,
+ u8 hopcount, u8 port_num);
+extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops);
+extern int rio_unregister_scan(int mport_id);
+extern void rio_attach_device(struct rio_dev *rdev);
/* Structures internal to the RIO core code */
extern struct device_attribute rio_dev_attrs[];
diff --git a/include/linux/rio.h b/include/linux/rio.h
index a3e7842..30a48a8 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -237,6 +237,7 @@ enum rio_phy_type {
* @name: Port name string
* @priv: Master port private data
* @dma: DMA device associated with mport
+ * @nscan: RapidIO network enumeration/discovery operations
*/
struct rio_mport {
struct list_head dbells; /* list of doorbell events */
@@ -262,6 +263,7 @@ struct rio_mport {
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
struct dma_device dma;
#endif
+ struct rio_scan *nscan;
};
struct rio_id_table {
@@ -460,6 +462,16 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev)
}
#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+/**
+ * struct rio_scan - RIO enumeration and discovery operations
+ * @enumerate: Callback to perform RapidIO fabric enumeration.
+ * @discover: Callback to perform RapidIO fabric discovery.
+ */
+struct rio_scan {
+ int (*enumerate)(struct rio_mport *mport);
+ int (*discover)(struct rio_mport *mport);
+};
+
/* Architecture and hardware-specific functions */
extern int rio_register_mport(struct rio_mport *);
extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int);
diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h
index b75c059..5059994 100644
--- a/include/linux/rio_drv.h
+++ b/include/linux/rio_drv.h
@@ -433,5 +433,6 @@ extern u16 rio_local_get_device_id(struct rio_mport *port);
extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from);
extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did,
struct rio_dev *from);
+extern int rio_init_mports(void);
#endif /* LINUX_RIO_DRV_H */
--
1.7.8.4
^ permalink raw reply related
* Re: [PATCH -V6 18/27] mm/THP: withdraw the pgtable after pmdp related operations
From: Andrea Arcangeli @ 2013-04-24 15:14 UTC (permalink / raw)
To: Aneesh Kumar K.V; +Cc: paulus, linuxppc-dev, David Gibson
In-Reply-To: <87a9oo2t5a.fsf@linux.vnet.ibm.com>
Hi,
On Wed, Apr 24, 2013 at 02:38:01PM +0530, Aneesh Kumar K.V wrote:
> From 7444a5eda33c00eea465b51c405cb830c57513b7 Mon Sep 17 00:00:00 2001
> From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
> Date: Wed, 6 Mar 2013 12:50:37 +0530
> Subject: [PATCH] mm/THP: withdraw the pgtable after pmdp related operations
>
> For architectures like ppc64 we look at deposited pgtable when
> calling pmdp_get_and_clear. So do the pgtable_trans_huge_withdraw
> after finishing pmdp related operations.
>
> Cc: Andrea Arcangeli <aarcange@redhat.com>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> ---
> mm/huge_memory.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
>
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index 84f3180..21c5ebd 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -1363,9 +1363,15 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
> struct page *page;
> pgtable_t pgtable;
> pmd_t orig_pmd;
> - pgtable = pgtable_trans_huge_withdraw(tlb->mm, pmd);
> + /*
> + * For architectures like ppc64 we look at deposited pgtable
> + * when calling pmdp_get_and_clear. So do the
> + * pgtable_trans_huge_withdraw after finishing pmdp related
> + * operations.
> + */
> orig_pmd = pmdp_get_and_clear(tlb->mm, addr, pmd);
> tlb_remove_pmd_tlb_entry(tlb, pmd, addr);
> + pgtable = pgtable_trans_huge_withdraw(tlb->mm, pmd);
So I assume you're going to check the pmdp pointer address in
_withdraw, as the *pmd content is already clear. And that you're
checking the deposited pmd earlier in pmdp_get_and_clear. A bit
strange overall not seeing how exactly you're using the new parameter
and the deposited pmds, but safe.
Thanks,
Andrea
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox