* [PATCH v3 1/2] powerpc/pseries: PAPR persistent memory support
From: Oliver O'Halloran @ 2018-10-14 23:18 UTC (permalink / raw)
To: linuxppc-dev; +Cc: nfont, dan.j.williams, Oliver O'Halloran, linux-nvdimm
This patch implements support for discovering storage class memory
devices at boot and for handling hotplug of new regions via RTAS
hotplug events.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
---
v2: Added missing pmem.c
v3: no changes
---
arch/powerpc/include/asm/firmware.h | 3 +-
arch/powerpc/include/asm/hvcall.h | 10 +-
arch/powerpc/include/asm/rtas.h | 2 +
arch/powerpc/kernel/rtasd.c | 2 +
arch/powerpc/platforms/pseries/Makefile | 2 +-
arch/powerpc/platforms/pseries/dlpar.c | 4 +
arch/powerpc/platforms/pseries/firmware.c | 1 +
arch/powerpc/platforms/pseries/pmem.c | 164 ++++++++++++++++++++++++++++++
arch/powerpc/platforms/pseries/pseries.h | 5 +
arch/powerpc/platforms/pseries/ras.c | 3 +-
10 files changed, 192 insertions(+), 4 deletions(-)
create mode 100644 arch/powerpc/platforms/pseries/pmem.c
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 7a051bd21f87..113c64d5d394 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -52,6 +52,7 @@
#define FW_FEATURE_PRRN ASM_CONST(0x0000000200000000)
#define FW_FEATURE_DRMEM_V2 ASM_CONST(0x0000000400000000)
#define FW_FEATURE_DRC_INFO ASM_CONST(0x0000000800000000)
+#define FW_FEATURE_PAPR_SCM ASM_CONST(0x0000001000000000)
#ifndef __ASSEMBLY__
@@ -69,7 +70,7 @@ enum {
FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY |
FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN |
FW_FEATURE_HPT_RESIZE | FW_FEATURE_DRMEM_V2 |
- FW_FEATURE_DRC_INFO,
+ FW_FEATURE_DRC_INFO | FW_FEATURE_PAPR_SCM,
FW_FEATURE_PSERIES_ALWAYS = 0,
FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL,
FW_FEATURE_POWERNV_ALWAYS = 0,
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index a0b17f9f1ea4..0e81ef83b35a 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -295,7 +295,15 @@
#define H_INT_ESB 0x3C8
#define H_INT_SYNC 0x3CC
#define H_INT_RESET 0x3D0
-#define MAX_HCALL_OPCODE H_INT_RESET
+#define H_SCM_READ_METADATA 0x3E4
+#define H_SCM_WRITE_METADATA 0x3E8
+#define H_SCM_BIND_MEM 0x3EC
+#define H_SCM_UNBIND_MEM 0x3F0
+#define H_SCM_QUERY_BLOCK_MEM_BINDING 0x3F4
+#define H_SCM_QUERY_LOGICAL_MEM_BINDING 0x3F8
+#define H_SCM_MEM_QUERY 0x3FC
+#define H_SCM_BLOCK_CLEAR 0x400
+#define MAX_HCALL_OPCODE H_SCM_BLOCK_CLEAR
/* H_VIOCTL functions */
#define H_GET_VIOA_DUMP_SIZE 0x01
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 71e393c46a49..1e81f3d55457 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -125,6 +125,7 @@ struct rtas_suspend_me_data {
#define RTAS_TYPE_INFO 0xE2
#define RTAS_TYPE_DEALLOC 0xE3
#define RTAS_TYPE_DUMP 0xE4
+#define RTAS_TYPE_HOTPLUG 0xE5
/* I don't add PowerMGM events right now, this is a different topic */
#define RTAS_TYPE_PMGM_POWER_SW_ON 0x60
#define RTAS_TYPE_PMGM_POWER_SW_OFF 0x61
@@ -316,6 +317,7 @@ struct pseries_hp_errorlog {
#define PSERIES_HP_ELOG_RESOURCE_MEM 2
#define PSERIES_HP_ELOG_RESOURCE_SLOT 3
#define PSERIES_HP_ELOG_RESOURCE_PHB 4
+#define PSERIES_HP_ELOG_RESOURCE_PMEM 6
#define PSERIES_HP_ELOG_ACTION_ADD 1
#define PSERIES_HP_ELOG_ACTION_REMOVE 2
diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
index 44d66c33d59d..088fe9edd13e 100644
--- a/arch/powerpc/kernel/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -91,6 +91,8 @@ static char *rtas_event_type(int type)
return "Dump Notification Event";
case RTAS_TYPE_PRRN:
return "Platform Resource Reassignment Event";
+ case RTAS_TYPE_HOTPLUG:
+ return "Hotplug Event";
}
return rtas_type[0];
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 7e89d5c47068..892b27ced973 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_KEXEC_CORE) += kexec.o
obj-$(CONFIG_PSERIES_ENERGY) += pseries_energy.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o
-obj-$(CONFIG_MEMORY_HOTPLUG) += hotplug-memory.o
+obj-$(CONFIG_MEMORY_HOTPLUG) += hotplug-memory.o pmem.o
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
obj-$(CONFIG_HVCS) += hvcserver.o
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index a0b20c03f078..795996fefdb9 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -357,6 +357,10 @@ static int handle_dlpar_errorlog(struct pseries_hp_errorlog *hp_elog)
case PSERIES_HP_ELOG_RESOURCE_CPU:
rc = dlpar_cpu(hp_elog);
break;
+ case PSERIES_HP_ELOG_RESOURCE_PMEM:
+ rc = dlpar_hp_pmem(hp_elog);
+ break;
+
default:
pr_warn_ratelimited("Invalid resource (%d) specified\n",
hp_elog->resource);
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index a3bbeb43689e..4927de57d8ee 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -65,6 +65,7 @@ hypertas_fw_features_table[] = {
{FW_FEATURE_SET_MODE, "hcall-set-mode"},
{FW_FEATURE_BEST_ENERGY, "hcall-best-energy-1*"},
{FW_FEATURE_HPT_RESIZE, "hcall-hpt-resize"},
+ {FW_FEATURE_PAPR_SCM, "hcall-scm"},
};
/* Build up the firmware features bitmask using the contents of
diff --git a/arch/powerpc/platforms/pseries/pmem.c b/arch/powerpc/platforms/pseries/pmem.c
new file mode 100644
index 000000000000..a27f40eb57b1
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/pmem.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Handles hot and cold plug of persistent memory regions on pseries.
+ */
+
+#define pr_fmt(fmt) "pseries-pmem: " fmt
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/sched.h> /* for idle_task_exit */
+#include <linux/sched/hotplug.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/firmware.h>
+#include <asm/machdep.h>
+#include <asm/vdso_datapage.h>
+#include <asm/plpar_wrappers.h>
+#include <asm/topology.h>
+
+#include "pseries.h"
+#include "offline_states.h"
+
+static struct device_node *pmem_node;
+
+static ssize_t pmem_drc_add_node(u32 drc_index)
+{
+ struct device_node *dn;
+ int rc;
+
+ pr_debug("Attempting to add pmem node, drc index: %x\n", drc_index);
+
+ rc = dlpar_acquire_drc(drc_index);
+ if (rc) {
+ pr_err("Failed to acquire DRC, rc: %d, drc index: %x\n",
+ rc, drc_index);
+ return -EINVAL;
+ }
+
+ dn = dlpar_configure_connector(cpu_to_be32(drc_index), pmem_node);
+ if (!dn) {
+ pr_err("configure-connector failed for drc %x\n", drc_index);
+ dlpar_release_drc(drc_index);
+ return -EINVAL;
+ }
+
+ /* NB: The of reconfig notifier creates platform device from the node */
+ rc = dlpar_attach_node(dn, pmem_node);
+ if (rc) {
+ pr_err("Failed to attach node %s, rc: %d, drc index: %x\n",
+ dn->name, rc, drc_index);
+
+ if (dlpar_release_drc(drc_index))
+ dlpar_free_cc_nodes(dn);
+
+ return rc;
+ }
+
+ pr_info("Successfully added %pOF, drc index: %x\n", dn, drc_index);
+
+ return 0;
+}
+
+static ssize_t pmem_drc_remove_node(u32 drc_index)
+{
+ struct device_node *dn;
+ uint32_t index;
+ int rc;
+
+ for_each_child_of_node(pmem_node, dn) {
+ if (of_property_read_u32(dn, "ibm,my-drc-index", &index))
+ continue;
+ if (index == drc_index)
+ break;
+ }
+
+ if (!dn) {
+ pr_err("Attempting to remove unused DRC index %x\n", drc_index);
+ return -ENODEV;
+ }
+
+ pr_debug("Attempting to remove %pOF, drc index: %x\n", dn, drc_index);
+
+ /* * NB: tears down the ibm,pmemory device as a side-effect */
+ rc = dlpar_detach_node(dn);
+ if (rc)
+ return rc;
+
+ rc = dlpar_release_drc(drc_index);
+ if (rc) {
+ pr_err("Failed to release drc (%x) for CPU %s, rc: %d\n",
+ drc_index, dn->name, rc);
+ dlpar_attach_node(dn, pmem_node);
+ return rc;
+ }
+
+ pr_info("Successfully removed PMEM with drc index: %x\n", drc_index);
+
+ return 0;
+}
+
+int dlpar_hp_pmem(struct pseries_hp_errorlog *hp_elog)
+{
+ u32 count, drc_index;
+ int rc;
+
+ /* slim chance, but we might get a hotplug event while booting */
+ if (!pmem_node)
+ pmem_node = of_find_node_by_type(NULL, "ibm,persistent-memory");
+ if (!pmem_node) {
+ pr_err("Hotplug event for a pmem device, but none exists\n");
+ return -ENODEV;
+ }
+
+ if (hp_elog->id_type != PSERIES_HP_ELOG_ID_DRC_INDEX) {
+ pr_err("Unsupported hotplug event type %d\n",
+ hp_elog->id_type);
+ return -EINVAL;
+ }
+
+ count = hp_elog->_drc_u.drc_count;
+ drc_index = hp_elog->_drc_u.drc_index;
+
+ lock_device_hotplug();
+
+ if (hp_elog->action == PSERIES_HP_ELOG_ACTION_ADD) {
+ rc = pmem_drc_add_node(drc_index);
+ } else if (hp_elog->action == PSERIES_HP_ELOG_ACTION_REMOVE) {
+ rc = pmem_drc_remove_node(drc_index);
+ } else {
+ pr_err("Unsupported hotplug action (%d)\n", hp_elog->action);
+ rc = -EINVAL;
+ }
+
+ unlock_device_hotplug();
+ return rc;
+}
+
+const struct of_device_id drc_pmem_match[] = {
+ { .type = "ibm,persistent-memory", },
+ {}
+};
+
+static int pseries_pmem_init(void)
+{
+ pmem_node = of_find_node_by_type(NULL, "ibm,persistent-memory");
+ if (!pmem_node)
+ return 0;
+
+ /*
+ * The generic OF bus probe/populate handles creating platform devices
+ * from the child (ibm,pmemory) nodes. The generic code registers an of
+ * reconfig notifier to handle the hot-add/remove cases too.
+ */
+ of_platform_bus_probe(pmem_node, drc_pmem_match, NULL);
+
+ return 0;
+}
+machine_arch_initcall(pseries, pseries_pmem_init);
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 60db2ee511fb..d0829677c896 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -63,11 +63,16 @@ void queue_hotplug_event(struct pseries_hp_errorlog *hp_errlog,
struct completion *hotplug_done, int *rc);
#ifdef CONFIG_MEMORY_HOTPLUG
int dlpar_memory(struct pseries_hp_errorlog *hp_elog);
+int dlpar_hp_pmem(struct pseries_hp_errorlog *hp_elog);
#else
static inline int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
{
return -EOPNOTSUPP;
}
+int dlpar_hp_pmem(struct pseries_hp_errorlog *hp_elog)
+{
+ return -EOPNOTSUPP;
+};
#endif
#ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 851ce326874a..ae22fc007276 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -237,7 +237,8 @@ static irqreturn_t ras_hotplug_interrupt(int irq, void *dev_id)
* hotplug events on the ras_log_buf to be handled by rtas_errd.
*/
if (hp_elog->resource == PSERIES_HP_ELOG_RESOURCE_MEM ||
- hp_elog->resource == PSERIES_HP_ELOG_RESOURCE_CPU)
+ hp_elog->resource == PSERIES_HP_ELOG_RESOURCE_CPU ||
+ hp_elog->resource == PSERIES_HP_ELOG_RESOURCE_PMEM)
queue_hotplug_event(hp_elog, NULL, NULL);
else
log_error(ras_log_buf, ERR_TYPE_RTAS_LOG, 0);
--
2.9.5
^ permalink raw reply related
* [PATCH v3 2/2] powerpc/pseries: Add driver for PAPR SCM regions
From: Oliver O'Halloran @ 2018-10-14 23:18 UTC (permalink / raw)
To: linuxppc-dev; +Cc: nfont, dan.j.williams, Oliver O'Halloran, linux-nvdimm
In-Reply-To: <20181014231828.17139-1-oohall@gmail.com>
Adds a driver that implements support for enabling and accessing PAPR
SCM regions. Unfortunately due to how the PAPR interface works we can't
use the existing of_pmem driver (yet) because:
a) The guest is required to use the H_SCM_BIND_MEM h-call to add
add the SCM region to it's physical address space, and
b) There is currently no mechanism for relating a bare of_pmem region
to the backing DIMM (or not-a-DIMM for our case).
Both of these are easily handled by rolling the functionality into a
seperate driver so here we are...
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
---
The alternative implementation here is that we have the pseries code
do the h-calls and craft a pmem-region@<addr> node based on that.
However, that doesn't solve b) and mpe has expressed his dislike of
adding new stuff to the DT at runtime so i'd say that's a non-starter.
---
v2: no change
v3: Corrected the mapping to use a DPA start address of zero
Added cond_resched() calls in the bind/unbind loops
---
arch/powerpc/platforms/pseries/Kconfig | 7 +
arch/powerpc/platforms/pseries/Makefile | 1 +
arch/powerpc/platforms/pseries/papr_scm.c | 345 ++++++++++++++++++++++++++++++
3 files changed, 353 insertions(+)
create mode 100644 arch/powerpc/platforms/pseries/papr_scm.c
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 0c698fd6d491..4b0fcb80efe5 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -140,3 +140,10 @@ config IBMEBUS
bool "Support for GX bus based adapters"
help
Bus device driver for GX bus based adapters.
+
+config PAPR_SCM
+ depends on PPC_PSERIES && MEMORY_HOTPLUG
+ select LIBNVDIMM
+ tristate "Support for the PAPR Storage Class Memory interface"
+ help
+ Enable access to hypervisor provided storage class memory.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 892b27ced973..a43ec843c8e2 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_IO_EVENT_IRQ) += io_event_irq.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_IBMEBUS) += ibmebus.o
+obj-$(CONFIG_PAPR_SCM) += papr_scm.o
ifdef CONFIG_PPC_PSERIES
obj-$(CONFIG_SUSPEND) += suspend.o
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
new file mode 100644
index 000000000000..ee9372b65ca5
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define pr_fmt(fmt) "papr-scm: " fmt
+
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/ndctl.h>
+#include <linux/sched.h>
+#include <linux/libnvdimm.h>
+#include <linux/platform_device.h>
+
+#include <asm/plpar_wrappers.h>
+
+#define BIND_ANY_ADDR (~0ul)
+
+#define PAPR_SCM_DIMM_CMD_MASK \
+ ((1ul << ND_CMD_GET_CONFIG_SIZE) | \
+ (1ul << ND_CMD_GET_CONFIG_DATA) | \
+ (1ul << ND_CMD_SET_CONFIG_DATA))
+
+struct papr_scm_priv {
+ struct platform_device *pdev;
+ struct device_node *dn;
+ uint32_t drc_index;
+ uint64_t blocks;
+ uint64_t block_size;
+ int metadata_size;
+
+ uint64_t bound_addr;
+
+ struct nvdimm_bus_descriptor bus_desc;
+ struct nvdimm_bus *bus;
+ struct nvdimm *nvdimm;
+ struct resource res;
+ struct nd_region *region;
+ struct nd_interleave_set nd_set;
+};
+
+static int drc_pmem_bind(struct papr_scm_priv *p)
+{
+ unsigned long ret[PLPAR_HCALL_BUFSIZE];
+ uint64_t rc, token;
+
+ /*
+ * When the hypervisor cannot map all the requested memory in a single
+ * hcall it returns H_BUSY and we call again with the token until
+ * we get H_SUCCESS. Aborting the retry loop before getting H_SUCCESS
+ * leave the system in an undefined state, so we wait.
+ */
+ token = 0;
+
+ do {
+ rc = plpar_hcall(H_SCM_BIND_MEM, ret, p->drc_index, 0,
+ p->blocks, BIND_ANY_ADDR, token);
+ token = be64_to_cpu(ret[0]);
+ cond_resched();
+ } while (rc == H_BUSY);
+
+ if (rc) {
+ dev_err(&p->pdev->dev, "bind err: %lld\n", rc);
+ return -ENXIO;
+ }
+
+ p->bound_addr = be64_to_cpu(ret[1]);
+
+ dev_dbg(&p->pdev->dev, "bound drc %x to %pR\n", p->drc_index, &p->res);
+
+ return 0;
+}
+
+static int drc_pmem_unbind(struct papr_scm_priv *p)
+{
+ unsigned long ret[PLPAR_HCALL_BUFSIZE];
+ uint64_t rc, token;
+
+ token = 0;
+
+ /* NB: unbind has the same retry requirements mentioned above */
+ do {
+ rc = plpar_hcall(H_SCM_UNBIND_MEM, ret, p->drc_index,
+ p->bound_addr, p->blocks, token);
+ token = be64_to_cpu(ret);
+ cond_resched();
+ } while (rc == H_BUSY);
+
+ if (rc)
+ dev_err(&p->pdev->dev, "unbind error: %lld\n", rc);
+
+ return !!rc;
+}
+
+static int papr_scm_meta_get(struct papr_scm_priv *p,
+ struct nd_cmd_get_config_data_hdr *hdr)
+{
+ unsigned long data[PLPAR_HCALL_BUFSIZE];
+ int64_t ret;
+
+ if (hdr->in_offset >= p->metadata_size || hdr->in_length != 1)
+ return -EINVAL;
+
+ ret = plpar_hcall(H_SCM_READ_METADATA, data, p->drc_index,
+ hdr->in_offset, 1);
+
+ if (ret == H_PARAMETER) /* bad DRC index */
+ return -ENODEV;
+ if (ret)
+ return -EINVAL; /* other invalid parameter */
+
+ hdr->out_buf[0] = data[0] & 0xff;
+
+ return 0;
+}
+
+static int papr_scm_meta_set(struct papr_scm_priv *p,
+ struct nd_cmd_set_config_hdr *hdr)
+{
+ int64_t ret;
+
+ if (hdr->in_offset >= p->metadata_size || hdr->in_length != 1)
+ return -EINVAL;
+
+ ret = plpar_hcall_norets(H_SCM_WRITE_METADATA,
+ p->drc_index, hdr->in_offset, hdr->in_buf[0], 1);
+
+ if (ret == H_PARAMETER) /* bad DRC index */
+ return -ENODEV;
+ if (ret)
+ return -EINVAL; /* other invalid parameter */
+
+ return 0;
+}
+
+int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc, struct nvdimm *nvdimm,
+ unsigned int cmd, void *buf, unsigned int buf_len, int *cmd_rc)
+{
+ struct nd_cmd_get_config_size *get_size_hdr;
+ struct papr_scm_priv *p;
+
+ /* Only dimm-specific calls are supported atm */
+ if (!nvdimm)
+ return -EINVAL;
+
+ p = nvdimm_provider_data(nvdimm);
+
+ switch (cmd) {
+ case ND_CMD_GET_CONFIG_SIZE:
+ get_size_hdr = buf;
+
+ get_size_hdr->status = 0;
+ get_size_hdr->max_xfer = 1;
+ get_size_hdr->config_size = p->metadata_size;
+ *cmd_rc = 0;
+ break;
+
+ case ND_CMD_GET_CONFIG_DATA:
+ *cmd_rc = papr_scm_meta_get(p, buf);
+ break;
+
+ case ND_CMD_SET_CONFIG_DATA:
+ *cmd_rc = papr_scm_meta_set(p, buf);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(&p->pdev->dev, "returned with cmd_rc = %d\n", *cmd_rc);
+
+ return 0;
+}
+
+static const struct attribute_group *region_attr_groups[] = {
+ &nd_region_attribute_group,
+ &nd_device_attribute_group,
+ &nd_mapping_attribute_group,
+ &nd_numa_attribute_group,
+ NULL,
+};
+
+static const struct attribute_group *bus_attr_groups[] = {
+ &nvdimm_bus_attribute_group,
+ NULL,
+};
+
+static const struct attribute_group *papr_scm_dimm_groups[] = {
+ &nvdimm_attribute_group,
+ &nd_device_attribute_group,
+ NULL,
+};
+
+static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
+{
+ struct device *dev = &p->pdev->dev;
+ struct nd_mapping_desc mapping;
+ struct nd_region_desc ndr_desc;
+ unsigned long dimm_flags;
+
+ p->bus_desc.ndctl = papr_scm_ndctl;
+ p->bus_desc.module = THIS_MODULE;
+ p->bus_desc.of_node = p->pdev->dev.of_node;
+ p->bus_desc.attr_groups = bus_attr_groups;
+ p->bus_desc.provider_name = kstrdup(p->pdev->name, GFP_KERNEL);
+
+ if (!p->bus_desc.provider_name)
+ return -ENOMEM;
+
+ p->bus = nvdimm_bus_register(NULL, &p->bus_desc);
+ if (!p->bus) {
+ dev_err(dev, "Error creating nvdimm bus %pOF\n", p->dn);
+ return -ENXIO;
+ }
+
+ dimm_flags = 0;
+ set_bit(NDD_ALIASING, &dimm_flags);
+
+ p->nvdimm = nvdimm_create(p->bus, p, papr_scm_dimm_groups,
+ dimm_flags, PAPR_SCM_DIMM_CMD_MASK, 0, NULL);
+ if (!p->nvdimm) {
+ dev_err(dev, "Error creating DIMM object for %pOF\n", p->dn);
+ goto err;
+ }
+
+ /* now add the region */
+
+ memset(&mapping, 0, sizeof(mapping));
+ mapping.nvdimm = p->nvdimm;
+ mapping.start = 0;
+ mapping.size = p->blocks * p->block_size; // XXX: potential overflow?
+
+ memset(&ndr_desc, 0, sizeof(ndr_desc));
+ ndr_desc.attr_groups = region_attr_groups;
+ ndr_desc.numa_node = dev_to_node(&p->pdev->dev);
+ ndr_desc.res = &p->res;
+ ndr_desc.of_node = p->dn;
+ ndr_desc.provider_data = p;
+ ndr_desc.mapping = &mapping;
+ ndr_desc.num_mappings = 1;
+ ndr_desc.nd_set = &p->nd_set;
+ set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+
+ p->region = nvdimm_pmem_region_create(p->bus, &ndr_desc);
+ if (!p->region) {
+ dev_err(dev, "Error registering region %pR from %pOF\n",
+ ndr_desc.res, p->dn);
+ goto err;
+ }
+
+ return 0;
+
+err: nvdimm_bus_unregister(p->bus);
+ kfree(p->bus_desc.provider_name);
+ return -ENXIO;
+}
+
+static int papr_scm_probe(struct platform_device *pdev)
+{
+ uint32_t drc_index, metadata_size, unit_cap[2];
+ struct device_node *dn = pdev->dev.of_node;
+ struct papr_scm_priv *p;
+ int rc;
+
+ /* check we have all the required DT properties */
+ if (of_property_read_u32(dn, "ibm,my-drc-index", &drc_index)) {
+ dev_err(&pdev->dev, "%pOF: missing drc-index!\n", dn);
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32_array(dn, "ibm,unit-capacity", unit_cap, 2)) {
+ dev_err(&pdev->dev, "%pOF: missing unit-capacity!\n", dn);
+ return -ENODEV;
+ }
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+
+ /* optional DT properties */
+ of_property_read_u32(dn, "ibm,metadata-size", &metadata_size);
+
+ p->dn = dn;
+ p->drc_index = drc_index;
+ p->block_size = unit_cap[0];
+ p->blocks = unit_cap[1];
+
+ /* might be zero */
+ p->metadata_size = metadata_size;
+ p->pdev = pdev;
+
+ /* request the hypervisor to bind this region to somewhere in memory */
+ rc = drc_pmem_bind(p);
+ if (rc)
+ goto err;
+
+ /* setup the resource for the newly bound range */
+ p->res.start = p->bound_addr;
+ p->res.end = p->bound_addr + p->blocks * p->block_size;
+ p->res.name = pdev->name;
+ p->res.flags = IORESOURCE_MEM;
+
+ rc = papr_scm_nvdimm_init(p);
+ if (rc)
+ goto err2;
+
+ platform_set_drvdata(pdev, p);
+
+ return 0;
+
+err2: drc_pmem_unbind(p);
+err: kfree(p);
+ return rc;
+}
+
+static int papr_scm_remove(struct platform_device *pdev)
+{
+ struct papr_scm_priv *p = platform_get_drvdata(pdev);
+
+ nvdimm_bus_unregister(p->bus);
+ drc_pmem_unbind(p);
+ kfree(p);
+
+ return 0;
+}
+
+static const struct of_device_id papr_scm_match[] = {
+ { .compatible = "ibm,pmemory" },
+ { },
+};
+
+static struct platform_driver papr_scm_driver = {
+ .probe = papr_scm_probe,
+ .remove = papr_scm_remove,
+ .driver = {
+ .name = "papr_scm",
+ .owner = THIS_MODULE,
+ .of_match_table = papr_scm_match,
+ },
+};
+
+module_platform_driver(papr_scm_driver);
+MODULE_DEVICE_TABLE(of, papr_scm_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("IBM Corporation");
--
2.9.5
^ permalink raw reply related
* Re: [PATCH v3 2/2] powerpc/pseries: Add driver for PAPR SCM regions
From: Dan Williams @ 2018-10-14 23:43 UTC (permalink / raw)
To: Oliver O'Halloran; +Cc: Nathan Fontenot, linuxppc-dev, linux-nvdimm
In-Reply-To: <20181014231828.17139-2-oohall@gmail.com>
On Sun, Oct 14, 2018 at 4:19 PM Oliver O'Halloran <oohall@gmail.com> wrote:
>
> Adds a driver that implements support for enabling and accessing PAPR
> SCM regions. Unfortunately due to how the PAPR interface works we can't
> use the existing of_pmem driver (yet) because:
>
> a) The guest is required to use the H_SCM_BIND_MEM h-call to add
> add the SCM region to it's physical address space, and
> b) There is currently no mechanism for relating a bare of_pmem region
> to the backing DIMM (or not-a-DIMM for our case).
>
> Both of these are easily handled by rolling the functionality into a
> seperate driver so here we are...
>
> Acked-by: Dan Williams <dan.j.williams@intel.com>
> Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
> ---
> The alternative implementation here is that we have the pseries code
> do the h-calls and craft a pmem-region@<addr> node based on that.
> However, that doesn't solve b) and mpe has expressed his dislike of
> adding new stuff to the DT at runtime so i'd say that's a non-starter.
> ---
> v2: no change
> v3: Corrected the mapping to use a DPA start address of zero
> Added cond_resched() calls in the bind/unbind loops
Looks good, could I trouble you for an ack on the build / merge fix?
https://patchwork.kernel.org/patch/10640385/
^ permalink raw reply
* Re: [PATCH v3 2/2] powerpc/pseries: Add driver for PAPR SCM regions
From: Oliver @ 2018-10-15 0:05 UTC (permalink / raw)
To: Dan Williams; +Cc: Nathan Fontenot, linuxppc-dev, linux-nvdimm@lists.01.org
In-Reply-To: <CAPcyv4jr4Y66wt7KtE7ke9OGX6kqNDQkO6yqAP8iaa2BzgdW2w@mail.gmail.com>
On Mon, Oct 15, 2018 at 10:44 AM Dan Williams <dan.j.williams@intel.com> wrote:
>
> On Sun, Oct 14, 2018 at 4:19 PM Oliver O'Halloran <oohall@gmail.com> wrote:
> >
> > Adds a driver that implements support for enabling and accessing PAPR
> > SCM regions. Unfortunately due to how the PAPR interface works we can't
> > use the existing of_pmem driver (yet) because:
> >
> > a) The guest is required to use the H_SCM_BIND_MEM h-call to add
> > add the SCM region to it's physical address space, and
> > b) There is currently no mechanism for relating a bare of_pmem region
> > to the backing DIMM (or not-a-DIMM for our case).
> >
> > Both of these are easily handled by rolling the functionality into a
> > seperate driver so here we are...
> >
> > Acked-by: Dan Williams <dan.j.williams@intel.com>
> > Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
> > ---
> > The alternative implementation here is that we have the pseries code
> > do the h-calls and craft a pmem-region@<addr> node based on that.
> > However, that doesn't solve b) and mpe has expressed his dislike of
> > adding new stuff to the DT at runtime so i'd say that's a non-starter.
> > ---
> > v2: no change
> > v3: Corrected the mapping to use a DPA start address of zero
> > Added cond_resched() calls in the bind/unbind loops
>
> Looks good, could I trouble you for an ack on the build / merge fix?
>
> https://patchwork.kernel.org/patch/10640385/
Sure thing. I checked that it built when rebased on top of your
pending branch before posting.
^ permalink raw reply
* [PATCH] macintosh/windfarm_smu_sat: Fix debug output
From: Benjamin Herrenschmidt @ 2018-10-15 0:18 UTC (permalink / raw)
To: linuxppc-dev
There's some antiquated debug output that's trying
to do a hand-made hexdump and turning into horrible
1-byte-per-line output these days.
Use print_hex_dump() instead
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
drivers/macintosh/windfarm_smu_sat.c | 25 +++++++------------------
1 file changed, 7 insertions(+), 18 deletions(-)
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index da7f4fc1a51d..a0f61eb853c5 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -22,14 +22,6 @@
#define VERSION "1.0"
-#define DEBUG
-
-#ifdef DEBUG
-#define DBG(args...) printk(args)
-#else
-#define DBG(args...) do { } while(0)
-#endif
-
/* If the cache is older than 800ms we'll refetch it */
#define MAX_AGE msecs_to_jiffies(800)
@@ -106,13 +98,10 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
buf[i+2] = data[3];
buf[i+3] = data[2];
}
-#ifdef DEBUG
- DBG(KERN_DEBUG "sat %d partition %x:", sat_id, id);
- for (i = 0; i < len; ++i)
- DBG(" %x", buf[i]);
- DBG("\n");
-#endif
+ printk(KERN_DEBUG "sat %d partition %x:", sat_id, id);
+ print_hex_dump(KERN_DEBUG, " ", DUMP_PREFIX_OFFSET,
+ 16, 1, buf, len, false);
if (size)
*size = len;
return (struct smu_sdbp_header *) buf;
@@ -132,13 +121,13 @@ static int wf_sat_read_cache(struct wf_sat *sat)
if (err < 0)
return err;
sat->last_read = jiffies;
+
#ifdef LOTSA_DEBUG
{
int i;
- DBG(KERN_DEBUG "wf_sat_get: data is");
- for (i = 0; i < 16; ++i)
- DBG(" %.2x", sat->cache[i]);
- DBG("\n");
+ printk(KERN_DEBUG "wf_sat_get: data is");
+ print_hex_dump(KERN_DEBUG, " ", DUMP_PREFIX_OFFSET,
+ 16, 1, sat->cache, 16, false);
}
#endif
return 0;
^ permalink raw reply related
* [PATCH v3 00/18] of: overlay: validation checks, subsequent fixes
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
From: Frank Rowand <frank.rowand@sony.com>
Add checks to (1) overlay apply process and (2) memory freeing
triggered by overlay release. The checks are intended to detect
possible memory leaks and invalid overlays.
The checks revealed bugs in existing code. Fixed the bugs.
While fixing bugs, noted other issues, which are fixed in
separate patches.
***** Powerpc folks: I was not able to test the patches that
***** directly impact Powerpc systems that use dynamic
***** devicetree. Please review that code carefully and
***** test. The specific patches are: 03/16, 04/16, 07/16
FPGA folks:
I made the validation checks that should result in an
invalid live devicetree report "ERROR" and cause the overlay apply
to fail.
I made the memory leak validation tests report "WARNING" and allow
the overlay apply to complete successfully. Please let me know
if you encounter the warnings. There are at least two paths
forward to deal with the cases that trigger the warning: (1) change
the warning to an error and fail the overlay apply, or (2) find a
way to detect the potential memory leaks and free the memory
appropriately.
ALL people:
The validations do _not_ address another major concern I have with
releasing overlays, which is use after free errors.
Changes since v2:
- 13/18: Use continue to reduce indentation in find_dup_cset_node_entry()
and find_dup_cset_prop()
Changes since v1:
- move patch 16/16 to 17/18
- move patch 15/16 to 18/18
- new patch 15/18
- new patch 16/18
- 05/18: add_changeset_node() header comment: incorrect comment for @target
- 18/18: add same fix for of_parse_phandle_with_args()
- 18/18: add same fix for of_parse_phandle_with_args_map()
Frank Rowand (18):
of: overlay: add tests to validate kfrees from overlay removal
of: overlay: add missing of_node_put() after add new node to changeset
of: overlay: add missing of_node_get() in __of_attach_node_sysfs
powerpc/pseries: add of_node_put() in dlpar_detach_node()
of: overlay: use prop add changeset entry for property in new nodes
of: overlay: do not duplicate properties from overlay for new nodes
of: dynamic: change type of of_{at,de}tach_node() to void
of: overlay: reorder fields in struct fragment
of: overlay: validate overlay properties #address-cells and
#size-cells
of: overlay: make all pr_debug() and pr_err() messages unique
of: overlay: test case of two fragments adding same node
of: overlay: check prevents multiple fragments add or delete same node
of: overlay: check prevents multiple fragments touching same property
of: unittest: remove unused of_unittest_apply_overlay() argument
of: overlay: set node fields from properties when add new overlay node
of: unittest: allow base devicetree to have symbol metadata
of: unittest: find overlays[] entry by name instead of index
of: unittest: initialize args before calling of_*parse_*()
arch/powerpc/platforms/pseries/dlpar.c | 15 +-
arch/powerpc/platforms/pseries/reconfig.c | 6 +-
drivers/of/dynamic.c | 68 +++--
drivers/of/kobj.c | 4 +-
drivers/of/overlay.c | 298 ++++++++++++++++-----
drivers/of/unittest-data/Makefile | 2 +
.../of/unittest-data/overlay_bad_add_dup_node.dts | 28 ++
.../of/unittest-data/overlay_bad_add_dup_prop.dts | 24 ++
drivers/of/unittest-data/overlay_base.dts | 1 +
drivers/of/unittest.c | 96 +++++--
include/linux/of.h | 19 +-
11 files changed, 439 insertions(+), 122 deletions(-)
create mode 100644 drivers/of/unittest-data/overlay_bad_add_dup_node.dts
create mode 100644 drivers/of/unittest-data/overlay_bad_add_dup_prop.dts
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply
* [PATCH v3 01/18] of: overlay: add tests to validate kfrees from overlay removal
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
Add checks:
- attempted kfree due to refcount reaching zero before overlay
is removed
- properties linked to an overlay node when the node is removed
- node refcount > one during node removal in a changeset destroy,
if the node was created by the changeset
After applying this patch, several validation warnings will be
reported from the devicetree unittest during boot due to
pre-existing devicetree bugs. The warnings will be similar to:
OF: ERROR: of_node_release() overlay node /testcase-data/overlay-node/test-bus/test-unittest11/test-unittest111 contains unexpected properties
OF: ERROR: memory leak - destroy cset entry: attach overlay node /testcase-data-2/substation@100/hvac-medium-2 with refcount 2
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/dynamic.c | 29 +++++++++++++++++++++++++++++
drivers/of/overlay.c | 1 +
include/linux/of.h | 15 ++++++++++-----
3 files changed, 40 insertions(+), 5 deletions(-)
diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index f4f8ed9b5454..b04ee021a891 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -330,6 +330,25 @@ void of_node_release(struct kobject *kobj)
if (!of_node_check_flag(node, OF_DYNAMIC))
return;
+ if (of_node_check_flag(node, OF_OVERLAY)) {
+
+ if (!of_node_check_flag(node, OF_OVERLAY_FREE_CSET)) {
+ /* premature refcount of zero, do not free memory */
+ pr_err("ERROR: memory leak %s() overlay node %pOF before free overlay changeset\n",
+ __func__, node);
+ return;
+ }
+
+ /*
+ * If node->properties non-empty then properties were added
+ * to this node either by different overlay that has not
+ * yet been removed, or by a non-overlay mechanism.
+ */
+ if (node->properties)
+ pr_err("ERROR: %s() overlay node %pOF contains unexpected properties\n",
+ __func__, node);
+ }
+
property_list_free(node->properties);
property_list_free(node->deadprops);
@@ -434,6 +453,16 @@ struct device_node *__of_node_dup(const struct device_node *np,
static void __of_changeset_entry_destroy(struct of_changeset_entry *ce)
{
+ if (ce->action == OF_RECONFIG_ATTACH_NODE &&
+ of_node_check_flag(ce->np, OF_OVERLAY)) {
+ if (kref_read(&ce->np->kobj.kref) > 1) {
+ pr_err("ERROR: memory leak - destroy cset entry: attach overlay node %pOF with refcount %d\n",
+ ce->np, kref_read(&ce->np->kobj.kref));
+ } else {
+ of_node_set_flag(ce->np, OF_OVERLAY_FREE_CSET);
+ }
+ }
+
of_node_put(ce->np);
list_del(&ce->node);
kfree(ce);
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index eda57ef12fd0..1176cb4b6e4e 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -373,6 +373,7 @@ static int add_changeset_node(struct overlay_changeset *ovcs,
return -ENOMEM;
tchild->parent = target_node;
+ of_node_set_flag(tchild, OF_OVERLAY);
ret = of_changeset_attach_node(&ovcs->cset, tchild);
if (ret)
diff --git a/include/linux/of.h b/include/linux/of.h
index 4d25e4f952d9..aa1dafaec6ae 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -138,11 +138,16 @@ static inline void of_node_put(struct device_node *node) { }
extern struct device_node *of_stdout;
extern raw_spinlock_t devtree_lock;
-/* flag descriptions (need to be visible even when !CONFIG_OF) */
-#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
-#define OF_DETACHED 2 /* node has been detached from the device tree */
-#define OF_POPULATED 3 /* device already created for the node */
-#define OF_POPULATED_BUS 4 /* of_platform_populate recursed to children of this node */
+/*
+ * struct device_node flag descriptions
+ * (need to be visible even when !CONFIG_OF)
+ */
+#define OF_DYNAMIC 1 /* (and properties) allocated via kmalloc */
+#define OF_DETACHED 2 /* detached from the device tree */
+#define OF_POPULATED 3 /* device already created */
+#define OF_POPULATED_BUS 4 /* platform bus created for children */
+#define OF_OVERLAY 5 /* allocated for an overlay */
+#define OF_OVERLAY_FREE_CSET 6 /* in overlay cset being freed */
#define OF_BAD_ADDR ((u64)-1)
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 02/18] of: overlay: add missing of_node_put() after add new node to changeset
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
The refcount of a newly added overlay node decrements to one
(instead of zero) when the overlay changeset is destroyed. This
change will cause the final decrement be to zero.
After applying this patch, new validation warnings will be
reported from the devicetree unittest during boot due to
a pre-existing devicetree bug. The warnings will be similar to:
OF: ERROR: memory leak of_node_release() overlay node /testcase-data/overlay-node/test-bus/test-unittest4 before free overlay changeset
This pre-existing devicetree bug will also trigger a WARN_ONCE() from
refcount_sub_and_test_checked() when an overlay changeset is
destroyed without having first been applied. This scenario occurs
when an error in the overlay is detected during the overlay changeset
creation:
WARNING: CPU: 0 PID: 1 at lib/refcount.c:187 refcount_sub_and_test_checked+0xa8/0xbc
refcount_t: underflow; use-after-free.
(unwind_backtrace) from (show_stack+0x10/0x14)
(show_stack) from (dump_stack+0x6c/0x8c)
(dump_stack) from (__warn+0xdc/0x104)
(__warn) from (warn_slowpath_fmt+0x44/0x6c)
(warn_slowpath_fmt) from (refcount_sub_and_test_checked+0xa8/0xbc)
(refcount_sub_and_test_checked) from (kobject_put+0x24/0x208)
(kobject_put) from (of_changeset_destroy+0x2c/0xb4)
(of_changeset_destroy) from (free_overlay_changeset+0x1c/0x9c)
(free_overlay_changeset) from (of_overlay_remove+0x284/0x2cc)
(of_overlay_remove) from (of_unittest_apply_revert_overlay_check.constprop.4+0xf8/0x1e8)
(of_unittest_apply_revert_overlay_check.constprop.4) from (of_unittest_overlay+0x960/0xed8)
(of_unittest_overlay) from (of_unittest+0x1cc4/0x2138)
(of_unittest) from (do_one_initcall+0x4c/0x28c)
(do_one_initcall) from (kernel_init_freeable+0x29c/0x378)
(kernel_init_freeable) from (kernel_init+0x8/0x110)
(kernel_init) from (ret_from_fork+0x14/0x2c)
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/overlay.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 1176cb4b6e4e..32cfee68f2e3 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -379,7 +379,9 @@ static int add_changeset_node(struct overlay_changeset *ovcs,
if (ret)
return ret;
- return build_changeset_next_level(ovcs, tchild, node);
+ ret = build_changeset_next_level(ovcs, tchild, node);
+ of_node_put(tchild);
+ return ret;
}
if (node->phandle && tchild->phandle)
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 03/18] of: overlay: add missing of_node_get() in __of_attach_node_sysfs
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
There is a matching of_node_put() in __of_detach_node_sysfs()
Remove misleading comment from function header comment for
of_detach_node().
This patch may result in memory leaks from code that directly calls
the dynamic node add and delete functions directly instead of
using changesets.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/dynamic.c | 3 ---
drivers/of/kobj.c | 4 +++-
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index b04ee021a891..275c0d7e2268 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -272,9 +272,6 @@ void __of_detach_node(struct device_node *np)
/**
* of_detach_node() - "Unplug" a node from the device tree.
- *
- * The caller must hold a reference to the node. The memory associated with
- * the node is not freed until its refcount goes to zero.
*/
int of_detach_node(struct device_node *np)
{
diff --git a/drivers/of/kobj.c b/drivers/of/kobj.c
index 7a0a18980b98..c72eef988041 100644
--- a/drivers/of/kobj.c
+++ b/drivers/of/kobj.c
@@ -133,6 +133,9 @@ int __of_attach_node_sysfs(struct device_node *np)
}
if (!name)
return -ENOMEM;
+
+ of_node_get(np);
+
rc = kobject_add(&np->kobj, parent, "%s", name);
kfree(name);
if (rc)
@@ -159,6 +162,5 @@ void __of_detach_node_sysfs(struct device_node *np)
kobject_del(&np->kobj);
}
- /* finally remove the kobj_init ref */
of_node_put(np);
}
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 04/18] powerpc/pseries: add of_node_put() in dlpar_detach_node()
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
"of: overlay: add missing of_node_get() in __of_attach_node_sysfs"
added a missing of_node_get() to __of_attach_node_sysfs(). This
results in a refcount imbalance for nodes attached with
dlpar_attach_node(). The calling sequence from dlpar_attach_node()
to __of_attach_node_sysfs() is:
dlpar_attach_node()
of_attach_node()
__of_attach_node_sysfs()
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
arch/powerpc/platforms/pseries/dlpar.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index a0b20c03f078..e3010b14aea5 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -272,6 +272,8 @@ int dlpar_detach_node(struct device_node *dn)
if (rc)
return rc;
+ of_node_put(dn);
+
return 0;
}
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 05/18] of: overlay: use prop add changeset entry for property in new nodes
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
The changeset entry 'update property' was used for new properties in
an overlay instead of 'add property'.
The decision of whether to use 'update property' was based on whether
the property already exists in the subtree where the node is being
spliced into. At the top level of creating a changeset describing the
overlay, the target node is in the live devicetree, so checking whether
the property exists in the target node returns the correct result.
As soon as the changeset creation algorithm recurses into a new node,
the target is no longer in the live devicetree, but is instead in the
detached overlay tree, thus all properties are incorrectly found to
already exist in the target.
This fix will expose another devicetree bug that will be fixed
in the following patch in the series.
When this patch is applied the errors reported by the devictree
unittest will change, and the unittest results will change from:
### dt-test ### end of unittest - 210 passed, 0 failed
to
### dt-test ### end of unittest - 203 passed, 7 failed
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/overlay.c | 112 ++++++++++++++++++++++++++++++++++-----------------
1 file changed, 74 insertions(+), 38 deletions(-)
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 32cfee68f2e3..94740f4ee34c 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -24,6 +24,26 @@
#include "of_private.h"
/**
+ * struct target - info about current target node as recursing through overlay
+ * @np: node where current level of overlay will be applied
+ * @in_livetree: @np is a node in the live devicetree
+ *
+ * Used in the algorithm to create the portion of a changeset that describes
+ * an overlay fragment, which is a devicetree subtree. Initially @np is a node
+ * in the live devicetree where the overlay subtree is targeted to be grafted
+ * into. When recursing to the next level of the overlay subtree, the target
+ * also recurses to the next level of the live devicetree, as long as overlay
+ * subtree node also exists in the live devicetree. When a node in the overlay
+ * subtree does not exist at the same level in the live devicetree, target->np
+ * points to a newly allocated node, and all subsequent targets in the subtree
+ * will be newly allocated nodes.
+ */
+struct target {
+ struct device_node *np;
+ bool in_livetree;
+};
+
+/**
* struct fragment - info about fragment nodes in overlay expanded device tree
* @target: target of the overlay operation
* @overlay: pointer to the __overlay__ node
@@ -72,8 +92,7 @@ static int devicetree_corrupt(void)
}
static int build_changeset_next_level(struct overlay_changeset *ovcs,
- struct device_node *target_node,
- const struct device_node *overlay_node);
+ struct target *target, const struct device_node *overlay_node);
/*
* of_resolve_phandles() finds the largest phandle in the live tree.
@@ -257,14 +276,17 @@ static struct property *dup_and_fixup_symbol_prop(
/**
* add_changeset_property() - add @overlay_prop to overlay changeset
* @ovcs: overlay changeset
- * @target_node: where to place @overlay_prop in live tree
+ * @target: where @overlay_prop will be placed
* @overlay_prop: property to add or update, from overlay tree
* @is_symbols_prop: 1 if @overlay_prop is from node "/__symbols__"
*
- * If @overlay_prop does not already exist in @target_node, add changeset entry
- * to add @overlay_prop in @target_node, else add changeset entry to update
+ * If @overlay_prop does not already exist in live devicetree, add changeset
+ * entry to add @overlay_prop in @target, else add changeset entry to update
* value of @overlay_prop.
*
+ * @target may be either in the live devicetree or in a new subtree that
+ * is contained in the changeset.
+ *
* Some special properties are not updated (no error returned).
*
* Update of property in symbols node is not allowed.
@@ -273,20 +295,22 @@ static struct property *dup_and_fixup_symbol_prop(
* invalid @overlay.
*/
static int add_changeset_property(struct overlay_changeset *ovcs,
- struct device_node *target_node,
- struct property *overlay_prop,
+ struct target *target, struct property *overlay_prop,
bool is_symbols_prop)
{
struct property *new_prop = NULL, *prop;
int ret = 0;
- prop = of_find_property(target_node, overlay_prop->name, NULL);
-
if (!of_prop_cmp(overlay_prop->name, "name") ||
!of_prop_cmp(overlay_prop->name, "phandle") ||
!of_prop_cmp(overlay_prop->name, "linux,phandle"))
return 0;
+ if (target->in_livetree)
+ prop = of_find_property(target->np, overlay_prop->name, NULL);
+ else
+ prop = NULL;
+
if (is_symbols_prop) {
if (prop)
return -EINVAL;
@@ -299,10 +323,10 @@ static int add_changeset_property(struct overlay_changeset *ovcs,
return -ENOMEM;
if (!prop)
- ret = of_changeset_add_property(&ovcs->cset, target_node,
+ ret = of_changeset_add_property(&ovcs->cset, target->np,
new_prop);
else
- ret = of_changeset_update_property(&ovcs->cset, target_node,
+ ret = of_changeset_update_property(&ovcs->cset, target->np,
new_prop);
if (ret) {
@@ -315,14 +339,14 @@ static int add_changeset_property(struct overlay_changeset *ovcs,
/**
* add_changeset_node() - add @node (and children) to overlay changeset
- * @ovcs: overlay changeset
- * @target_node: where to place @node in live tree
- * @node: node from within overlay device tree fragment
+ * @ovcs: overlay changeset
+ * @target: where @node will be placed in live tree or changeset
+ * @node: node from within overlay device tree fragment
*
- * If @node does not already exist in @target_node, add changeset entry
- * to add @node in @target_node.
+ * If @node does not already exist in @target, add changeset entry
+ * to add @node in @target.
*
- * If @node already exists in @target_node, and the existing node has
+ * If @node already exists in @target, and the existing node has
* a phandle, the overlay node is not allowed to have a phandle.
*
* If @node has child nodes, add the children recursively via
@@ -355,15 +379,16 @@ static int add_changeset_property(struct overlay_changeset *ovcs,
* invalid @overlay.
*/
static int add_changeset_node(struct overlay_changeset *ovcs,
- struct device_node *target_node, struct device_node *node)
+ struct target *target, struct device_node *node)
{
const char *node_kbasename;
struct device_node *tchild;
+ struct target target_child;
int ret = 0;
node_kbasename = kbasename(node->full_name);
- for_each_child_of_node(target_node, tchild)
+ for_each_child_of_node(target->np, tchild)
if (!of_node_cmp(node_kbasename, kbasename(tchild->full_name)))
break;
@@ -372,22 +397,28 @@ static int add_changeset_node(struct overlay_changeset *ovcs,
if (!tchild)
return -ENOMEM;
- tchild->parent = target_node;
+ tchild->parent = target->np;
of_node_set_flag(tchild, OF_OVERLAY);
ret = of_changeset_attach_node(&ovcs->cset, tchild);
if (ret)
return ret;
- ret = build_changeset_next_level(ovcs, tchild, node);
+ target_child.np = tchild;
+ target_child.in_livetree = false;
+
+ ret = build_changeset_next_level(ovcs, &target_child, node);
of_node_put(tchild);
return ret;
}
- if (node->phandle && tchild->phandle)
+ if (node->phandle && tchild->phandle) {
ret = -EINVAL;
- else
- ret = build_changeset_next_level(ovcs, tchild, node);
+ } else {
+ target_child.np = tchild;
+ target_child.in_livetree = target->in_livetree;
+ ret = build_changeset_next_level(ovcs, &target_child, node);
+ }
of_node_put(tchild);
return ret;
@@ -396,7 +427,7 @@ static int add_changeset_node(struct overlay_changeset *ovcs,
/**
* build_changeset_next_level() - add level of overlay changeset
* @ovcs: overlay changeset
- * @target_node: where to place @overlay_node in live tree
+ * @target: where to place @overlay_node in live tree
* @overlay_node: node from within an overlay device tree fragment
*
* Add the properties (if any) and nodes (if any) from @overlay_node to the
@@ -409,27 +440,26 @@ static int add_changeset_node(struct overlay_changeset *ovcs,
* invalid @overlay_node.
*/
static int build_changeset_next_level(struct overlay_changeset *ovcs,
- struct device_node *target_node,
- const struct device_node *overlay_node)
+ struct target *target, const struct device_node *overlay_node)
{
struct device_node *child;
struct property *prop;
int ret;
for_each_property_of_node(overlay_node, prop) {
- ret = add_changeset_property(ovcs, target_node, prop, 0);
+ ret = add_changeset_property(ovcs, target, prop, 0);
if (ret) {
pr_debug("Failed to apply prop @%pOF/%s, err=%d\n",
- target_node, prop->name, ret);
+ target->np, prop->name, ret);
return ret;
}
}
for_each_child_of_node(overlay_node, child) {
- ret = add_changeset_node(ovcs, target_node, child);
+ ret = add_changeset_node(ovcs, target, child);
if (ret) {
pr_debug("Failed to apply node @%pOF/%s, err=%d\n",
- target_node, child->name, ret);
+ target->np, child->name, ret);
of_node_put(child);
return ret;
}
@@ -442,17 +472,17 @@ static int build_changeset_next_level(struct overlay_changeset *ovcs,
* Add the properties from __overlay__ node to the @ovcs->cset changeset.
*/
static int build_changeset_symbols_node(struct overlay_changeset *ovcs,
- struct device_node *target_node,
+ struct target *target,
const struct device_node *overlay_symbols_node)
{
struct property *prop;
int ret;
for_each_property_of_node(overlay_symbols_node, prop) {
- ret = add_changeset_property(ovcs, target_node, prop, 1);
+ ret = add_changeset_property(ovcs, target, prop, 1);
if (ret) {
pr_debug("Failed to apply prop @%pOF/%s, err=%d\n",
- target_node, prop->name, ret);
+ target->np, prop->name, ret);
return ret;
}
}
@@ -475,6 +505,7 @@ static int build_changeset_symbols_node(struct overlay_changeset *ovcs,
static int build_changeset(struct overlay_changeset *ovcs)
{
struct fragment *fragment;
+ struct target target;
int fragments_count, i, ret;
/*
@@ -489,7 +520,9 @@ static int build_changeset(struct overlay_changeset *ovcs)
for (i = 0; i < fragments_count; i++) {
fragment = &ovcs->fragments[i];
- ret = build_changeset_next_level(ovcs, fragment->target,
+ target.np = fragment->target;
+ target.in_livetree = true;
+ ret = build_changeset_next_level(ovcs, &target,
fragment->overlay);
if (ret) {
pr_debug("apply failed '%pOF'\n", fragment->target);
@@ -499,7 +532,10 @@ static int build_changeset(struct overlay_changeset *ovcs)
if (ovcs->symbols_fragment) {
fragment = &ovcs->fragments[ovcs->count - 1];
- ret = build_changeset_symbols_node(ovcs, fragment->target,
+
+ target.np = fragment->target;
+ target.in_livetree = true;
+ ret = build_changeset_symbols_node(ovcs, &target,
fragment->overlay);
if (ret) {
pr_debug("apply failed '%pOF'\n", fragment->target);
@@ -517,7 +553,7 @@ static int build_changeset(struct overlay_changeset *ovcs)
* 1) "target" property containing the phandle of the target
* 2) "target-path" property containing the path of the target
*/
-static struct device_node *find_target_node(struct device_node *info_node)
+static struct device_node *find_target(struct device_node *info_node)
{
struct device_node *node;
const char *path;
@@ -623,7 +659,7 @@ static int init_overlay_changeset(struct overlay_changeset *ovcs,
fragment = &fragments[cnt];
fragment->overlay = overlay_node;
- fragment->target = find_target_node(node);
+ fragment->target = find_target(node);
if (!fragment->target) {
of_node_put(fragment->overlay);
ret = -EINVAL;
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 06/18] of: overlay: do not duplicate properties from overlay for new nodes
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
When allocating a new node, add_changeset_node() was duplicating the
properties from the respective node in the overlay instead of
allocating a node with no properties.
When this patch is applied the errors reported by the devictree
unittest from patch "of: overlay: add tests to validate kfrees from
overlay removal" will no longer occur. These error messages are of
the form:
"OF: ERROR: ..."
and the unittest results will change from:
### dt-test ### end of unittest - 203 passed, 7 failed
to
### dt-test ### end of unittest - 210 passed, 0 failed
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/overlay.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 94740f4ee34c..7fcf4a812d06 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -393,7 +393,7 @@ static int add_changeset_node(struct overlay_changeset *ovcs,
break;
if (!tchild) {
- tchild = __of_node_dup(node, node_kbasename);
+ tchild = __of_node_dup(NULL, node_kbasename);
if (!tchild)
return -ENOMEM;
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 07/18] of: dynamic: change type of of_{at, de}tach_node() to void
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
of_attach_node() and of_detach_node() always return zero, so
their return value is meaningless. Change their type to void
and fix all callers to ignore return value.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
arch/powerpc/platforms/pseries/dlpar.c | 13 ++-----------
arch/powerpc/platforms/pseries/reconfig.c | 6 +-----
drivers/of/dynamic.c | 9 ++-------
include/linux/of.h | 4 ++--
4 files changed, 7 insertions(+), 25 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index e3010b14aea5..0027eea94a8b 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -244,15 +244,9 @@ struct device_node *dlpar_configure_connector(__be32 drc_index,
int dlpar_attach_node(struct device_node *dn, struct device_node *parent)
{
- int rc;
-
dn->parent = parent;
- rc = of_attach_node(dn);
- if (rc) {
- printk(KERN_ERR "Failed to add device node %pOF\n", dn);
- return rc;
- }
+ of_attach_node(dn);
return 0;
}
@@ -260,7 +254,6 @@ int dlpar_attach_node(struct device_node *dn, struct device_node *parent)
int dlpar_detach_node(struct device_node *dn)
{
struct device_node *child;
- int rc;
child = of_get_next_child(dn, NULL);
while (child) {
@@ -268,9 +261,7 @@ int dlpar_detach_node(struct device_node *dn)
child = of_get_next_child(dn, child);
}
- rc = of_detach_node(dn);
- if (rc)
- return rc;
+ of_detach_node(dn);
of_node_put(dn);
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 0e0208117e77..0b72098da454 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -47,11 +47,7 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist
goto out_err;
}
- err = of_attach_node(np);
- if (err) {
- printk(KERN_ERR "Failed to add device node %s\n", path);
- goto out_err;
- }
+ of_attach_node(np);
of_node_put(np->parent);
diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index 275c0d7e2268..5f7c99b9de0d 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -224,7 +224,7 @@ static void __of_attach_node(struct device_node *np)
/**
* of_attach_node() - Plug a device node into the tree and global list.
*/
-int of_attach_node(struct device_node *np)
+void of_attach_node(struct device_node *np)
{
struct of_reconfig_data rd;
unsigned long flags;
@@ -241,8 +241,6 @@ int of_attach_node(struct device_node *np)
mutex_unlock(&of_mutex);
of_reconfig_notify(OF_RECONFIG_ATTACH_NODE, &rd);
-
- return 0;
}
void __of_detach_node(struct device_node *np)
@@ -273,11 +271,10 @@ void __of_detach_node(struct device_node *np)
/**
* of_detach_node() - "Unplug" a node from the device tree.
*/
-int of_detach_node(struct device_node *np)
+void of_detach_node(struct device_node *np)
{
struct of_reconfig_data rd;
unsigned long flags;
- int rc = 0;
memset(&rd, 0, sizeof(rd));
rd.dn = np;
@@ -291,8 +288,6 @@ int of_detach_node(struct device_node *np)
mutex_unlock(&of_mutex);
of_reconfig_notify(OF_RECONFIG_DETACH_NODE, &rd);
-
- return rc;
}
EXPORT_SYMBOL_GPL(of_detach_node);
diff --git a/include/linux/of.h b/include/linux/of.h
index aa1dafaec6ae..72c593455019 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -406,8 +406,8 @@ extern int of_phandle_iterator_args(struct of_phandle_iterator *it,
#define OF_RECONFIG_REMOVE_PROPERTY 0x0004
#define OF_RECONFIG_UPDATE_PROPERTY 0x0005
-extern int of_attach_node(struct device_node *);
-extern int of_detach_node(struct device_node *);
+extern void of_attach_node(struct device_node *np);
+extern void of_detach_node(struct device_node *np);
#define of_match_ptr(_ptr) (_ptr)
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 08/18] of: overlay: reorder fields in struct fragment
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
Order the fields of struct fragment in the same order as
struct of_overlay_notify_data. The order in struct fragment is
not significant. If both structs are ordered the same then when
examining the data in a debugger or dump the human involved does
not have to remember which context they are examining.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/overlay.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 7fcf4a812d06..272a0d1a5e18 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -49,8 +49,8 @@ struct target {
* @overlay: pointer to the __overlay__ node
*/
struct fragment {
- struct device_node *target;
struct device_node *overlay;
+ struct device_node *target;
};
/**
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 09/18] of: overlay: validate overlay properties #address-cells and #size-cells
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
If overlay properties #address-cells or #size-cells are already in
the live devicetree for any given node, then the values in the
overlay must match the values in the live tree.
If the properties are already in the live tree then there is no
need to create a changeset entry to add them since they must
have the same value. This reduces the memory used by the
changeset and eliminates a possible memory leak. This is
verified by 12 fewer warnings during the devicetree unittest,
as the possible memory leak warnings about #address-cells and
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/overlay.c | 38 +++++++++++++++++++++++++++++++++++---
1 file changed, 35 insertions(+), 3 deletions(-)
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 272a0d1a5e18..ee66651db553 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -287,7 +287,12 @@ static struct property *dup_and_fixup_symbol_prop(
* @target may be either in the live devicetree or in a new subtree that
* is contained in the changeset.
*
- * Some special properties are not updated (no error returned).
+ * Some special properties are not added or updated (no error returned):
+ * "name", "phandle", "linux,phandle".
+ *
+ * Properties "#address-cells" and "#size-cells" are not updated if they
+ * are already in the live tree, but if present in the live tree, the values
+ * in the overlay must match the values in the live tree.
*
* Update of property in symbols node is not allowed.
*
@@ -300,6 +305,7 @@ static int add_changeset_property(struct overlay_changeset *ovcs,
{
struct property *new_prop = NULL, *prop;
int ret = 0;
+ bool check_for_non_overlay_node = false;
if (!of_prop_cmp(overlay_prop->name, "name") ||
!of_prop_cmp(overlay_prop->name, "phandle") ||
@@ -322,13 +328,39 @@ static int add_changeset_property(struct overlay_changeset *ovcs,
if (!new_prop)
return -ENOMEM;
- if (!prop)
+ if (!prop) {
+
+ check_for_non_overlay_node = true;
ret = of_changeset_add_property(&ovcs->cset, target->np,
new_prop);
- else
+
+ } else if (!of_prop_cmp(prop->name, "#address-cells")) {
+
+ if (prop->length != 4 || new_prop->length != 4 ||
+ *(u32 *)prop->value != *(u32 *)new_prop->value)
+ pr_err("ERROR: overlay and/or live tree #address-cells invalid in node %pOF\n",
+ target->np);
+
+ } else if (!of_prop_cmp(prop->name, "#size-cells")) {
+
+ if (prop->length != 4 || new_prop->length != 4 ||
+ *(u32 *)prop->value != *(u32 *)new_prop->value)
+ pr_err("ERROR: overlay and/or live tree #size-cells invalid in node %pOF\n",
+ target->np);
+
+ } else {
+
+ check_for_non_overlay_node = true;
ret = of_changeset_update_property(&ovcs->cset, target->np,
new_prop);
+ }
+
+ if (check_for_non_overlay_node &&
+ !of_node_check_flag(target->np, OF_OVERLAY))
+ pr_err("WARNING: %s(), memory leak will occur if overlay removed. Property: %pOF/%s\n",
+ __func__, target->np, new_prop->name);
+
if (ret) {
kfree(new_prop->name);
kfree(new_prop->value);
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 10/18] of: overlay: make all pr_debug() and pr_err() messages unique
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
Make overlay.c debug and error messages unique so that they can be
unambiguously found by grep.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/overlay.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index ee66651db553..a3990c20e210 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -513,7 +513,7 @@ static int build_changeset_symbols_node(struct overlay_changeset *ovcs,
for_each_property_of_node(overlay_symbols_node, prop) {
ret = add_changeset_property(ovcs, target, prop, 1);
if (ret) {
- pr_debug("Failed to apply prop @%pOF/%s, err=%d\n",
+ pr_debug("Failed to apply symbols prop @%pOF/%s, err=%d\n",
target->np, prop->name, ret);
return ret;
}
@@ -557,7 +557,8 @@ static int build_changeset(struct overlay_changeset *ovcs)
ret = build_changeset_next_level(ovcs, &target,
fragment->overlay);
if (ret) {
- pr_debug("apply failed '%pOF'\n", fragment->target);
+ pr_debug("fragment apply failed '%pOF'\n",
+ fragment->target);
return ret;
}
}
@@ -570,7 +571,8 @@ static int build_changeset(struct overlay_changeset *ovcs)
ret = build_changeset_symbols_node(ovcs, &target,
fragment->overlay);
if (ret) {
- pr_debug("apply failed '%pOF'\n", fragment->target);
+ pr_debug("symbols fragment apply failed '%pOF'\n",
+ fragment->target);
return ret;
}
}
@@ -879,7 +881,7 @@ static int of_overlay_apply(const void *fdt, struct device_node *tree,
ret = __of_changeset_apply_notify(&ovcs->cset);
if (ret)
- pr_err("overlay changeset entry notify error %d\n", ret);
+ pr_err("overlay apply changeset entry notify error %d\n", ret);
/* notify failure is not fatal, continue */
list_add_tail(&ovcs->ovcs_list, &ovcs_list);
@@ -1138,7 +1140,7 @@ int of_overlay_remove(int *ovcs_id)
ret = __of_changeset_revert_notify(&ovcs->cset);
if (ret)
- pr_err("overlay changeset entry notify error %d\n", ret);
+ pr_err("overlay remove changeset entry notify error %d\n", ret);
/* notify failure is not fatal, continue */
*ovcs_id = 0;
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 11/18] of: overlay: test case of two fragments adding same node
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
Multiple overlay fragments adding or deleting the same node is not
supported. An attempt to do so results in an incorrect devicetree.
The node name will be munged for the second add.
After adding this patch, the unittest messages will show:
Duplicate name in motor-1, renamed to "controller#1"
OF: overlay: of_overlay_apply() err=0
### dt-test ### of_overlay_fdt_apply() expected -22, ret=0, overlay_bad_add_dup_node
### dt-test ### FAIL of_unittest_overlay_high_level():2419 Adding overlay 'overlay_bad_add_dup_node' failed
...
### dt-test ### end of unittest - 210 passed, 1 failed
The incorrect (munged) node name "controller#1" can be seen in the
/proc filesystem:
$ pwd
/proc/device-tree/testcase-data-2/substation@100/motor-1
$ ls
compatible controller controller#1 name phandle spin
$ ls controller
power_bus
$ ls controller#1
power_bus_emergency
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/unittest-data/Makefile | 1 +
.../of/unittest-data/overlay_bad_add_dup_node.dts | 28 ++++++++++++++++++++++
drivers/of/unittest.c | 5 ++++
3 files changed, 34 insertions(+)
create mode 100644 drivers/of/unittest-data/overlay_bad_add_dup_node.dts
diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index 013d85e694c6..166dbdbfd1c5 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_OF_OVERLAY) += overlay.dtb.o \
overlay_12.dtb.o \
overlay_13.dtb.o \
overlay_15.dtb.o \
+ overlay_bad_add_dup_node.dtb.o \
overlay_bad_phandle.dtb.o \
overlay_bad_symbol.dtb.o \
overlay_base.dtb.o
diff --git a/drivers/of/unittest-data/overlay_bad_add_dup_node.dts b/drivers/of/unittest-data/overlay_bad_add_dup_node.dts
new file mode 100644
index 000000000000..145dfc3b1024
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_bad_add_dup_node.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/*
+ * &electric_1/motor-1 and &spin_ctrl_1 are the same node:
+ * /testcase-data-2/substation@100/motor-1
+ *
+ * Thus the new node "controller" in each fragment will
+ * result in an attempt to add the same node twice.
+ * This will result in an error and the overlay apply
+ * will fail.
+ */
+
+&electric_1 {
+
+ motor-1 {
+ controller {
+ power_bus = < 0x1 0x2 >;
+ };
+ };
+};
+
+&spin_ctrl_1 {
+ controller {
+ power_bus_emergency = < 0x101 0x102 >;
+ };
+};
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 722537e14848..471b8eb6e842 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -2147,6 +2147,7 @@ struct overlay_info {
OVERLAY_INFO_EXTERN(overlay_12);
OVERLAY_INFO_EXTERN(overlay_13);
OVERLAY_INFO_EXTERN(overlay_15);
+OVERLAY_INFO_EXTERN(overlay_bad_add_dup_node);
OVERLAY_INFO_EXTERN(overlay_bad_phandle);
OVERLAY_INFO_EXTERN(overlay_bad_symbol);
@@ -2169,6 +2170,7 @@ struct overlay_info {
OVERLAY_INFO(overlay_12, 0),
OVERLAY_INFO(overlay_13, 0),
OVERLAY_INFO(overlay_15, 0),
+ OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL),
OVERLAY_INFO(overlay_bad_phandle, -EINVAL),
OVERLAY_INFO(overlay_bad_symbol, -EINVAL),
{}
@@ -2413,6 +2415,9 @@ static __init void of_unittest_overlay_high_level(void)
unittest(overlay_data_apply("overlay", NULL),
"Adding overlay 'overlay' failed\n");
+ unittest(overlay_data_apply("overlay_bad_add_dup_node", NULL),
+ "Adding overlay 'overlay_bad_add_dup_node' failed\n");
+
unittest(overlay_data_apply("overlay_bad_phandle", NULL),
"Adding overlay 'overlay_bad_phandle' failed\n");
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 12/18] of: overlay: check prevents multiple fragments add or delete same node
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
Multiple overlay fragments adding or deleting the same node is not
supported. Replace code comment of such, with check to detect the
attempt and fail the overlay apply.
Devicetree unittest where multiple fragments added the same node was
added in the previous patch in the series. After applying this patch
the unittest messages will no longer include:
Duplicate name in motor-1, renamed to "controller#1"
OF: overlay: of_overlay_apply() err=0
### dt-test ### of_overlay_fdt_apply() expected -22, ret=0, overlay_bad_add_dup_node
### dt-test ### FAIL of_unittest_overlay_high_level():2419 Adding overlay 'overlay_bad_add_dup_node' failed
...
### dt-test ### end of unittest - 210 passed, 1 failed
but will instead include:
OF: overlay: ERROR: multiple overlay fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller
...
### dt-test ### end of unittest - 211 passed, 0 failed
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
checkpatch errors "line over 80 characters" and "Too many leading tabs"
are ok, they will be fixed later in this series
drivers/of/overlay.c | 58 ++++++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 49 insertions(+), 9 deletions(-)
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index a3990c20e210..b0a0dafb6a13 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -398,14 +398,6 @@ static int add_changeset_property(struct overlay_changeset *ovcs,
* a live devicetree created from Open Firmware.
*
* NOTE_2: Multiple mods of created nodes not supported.
- * If more than one fragment contains a node that does not already exist
- * in the live tree, then for each fragment of_changeset_attach_node()
- * will add a changeset entry to add the node. When the changeset is
- * applied, __of_attach_node() will attach the node twice (once for
- * each fragment). At this point the device tree will be corrupted.
- *
- * TODO: add integrity check to ensure that multiple fragments do not
- * create the same node.
*
* Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
* invalid @overlay.
@@ -523,6 +515,54 @@ static int build_changeset_symbols_node(struct overlay_changeset *ovcs,
}
/**
+ * check_changeset_dup_add_node() - changeset validation: duplicate add node
+ * @ovcs: Overlay changeset
+ *
+ * Check changeset @ovcs->cset for multiple add node entries for the same
+ * node.
+ *
+ * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
+ * invalid overlay in @ovcs->fragments[].
+ */
+static int check_changeset_dup_add_node(struct overlay_changeset *ovcs)
+{
+ struct of_changeset_entry *ce_1, *ce_2;
+ char *fn_1, *fn_2;
+ int name_match;
+
+ list_for_each_entry(ce_1, &ovcs->cset.entries, node) {
+
+ if (ce_1->action == OF_RECONFIG_ATTACH_NODE ||
+ ce_1->action == OF_RECONFIG_DETACH_NODE) {
+
+ ce_2 = ce_1;
+ list_for_each_entry_continue(ce_2, &ovcs->cset.entries, node) {
+ if (ce_2->action == OF_RECONFIG_ATTACH_NODE ||
+ ce_2->action == OF_RECONFIG_DETACH_NODE) {
+ /* inexpensive name compare */
+ if (!of_node_cmp(ce_1->np->full_name,
+ ce_2->np->full_name)) {
+ /* expensive full path name compare */
+ fn_1 = kasprintf(GFP_KERNEL, "%pOF", ce_1->np);
+ fn_2 = kasprintf(GFP_KERNEL, "%pOF", ce_2->np);
+ name_match = !strcmp(fn_1, fn_2);
+ kfree(fn_1);
+ kfree(fn_2);
+ if (name_match) {
+ pr_err("ERROR: multiple overlay fragments add and/or delete node %pOF\n",
+ ce_1->np);
+ return -EINVAL;
+ }
+ }
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+/**
* build_changeset() - populate overlay changeset in @ovcs from @ovcs->fragments
* @ovcs: Overlay changeset
*
@@ -577,7 +617,7 @@ static int build_changeset(struct overlay_changeset *ovcs)
}
}
- return 0;
+ return check_changeset_dup_add_node(ovcs);
}
/*
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 13/18] of: overlay: check prevents multiple fragments touching same property
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
Add test case of two fragments updating the same property. After
adding the test case, the system hangs at end of boot, after
after slub stack dumps from kfree() in crypto modprobe code.
Multiple overlay fragments adding, modifying, or deleting the same
property is not supported. Add check to detect the attempt and fail
the overlay apply.
After applying this patch, the devicetree unittest messages will
include:
OF: overlay: ERROR: multiple overlay fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail
...
### dt-test ### end of unittest - 212 passed, 0 failed
The check to detect two fragments updating the same property is
folded into the patch that created the test case to maintain
bisectability.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
Changes since v2:
- Use continue to reduce indentation in find_dup_cset_node_entry()
and find_dup_cset_prop()
drivers/of/overlay.c | 118 ++++++++++++++-------
drivers/of/unittest-data/Makefile | 1 +
.../of/unittest-data/overlay_bad_add_dup_prop.dts | 24 +++++
drivers/of/unittest-data/overlay_base.dts | 1 +
drivers/of/unittest.c | 5 +
5 files changed, 112 insertions(+), 37 deletions(-)
create mode 100644 drivers/of/unittest-data/overlay_bad_add_dup_prop.dts
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index b0a0dafb6a13..908bcc62019b 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -514,52 +514,96 @@ static int build_changeset_symbols_node(struct overlay_changeset *ovcs,
return 0;
}
+static int find_dup_cset_node_entry(struct overlay_changeset *ovcs,
+ struct of_changeset_entry *ce_1)
+{
+ struct of_changeset_entry *ce_2;
+ char *fn_1, *fn_2;
+ int node_path_match;
+
+ if (ce_1->action != OF_RECONFIG_ATTACH_NODE &&
+ ce_1->action != OF_RECONFIG_DETACH_NODE)
+ return 0;
+
+ ce_2 = ce_1;
+ list_for_each_entry_continue(ce_2, &ovcs->cset.entries, node) {
+ if ((ce_2->action != OF_RECONFIG_ATTACH_NODE &&
+ ce_2->action != OF_RECONFIG_DETACH_NODE) ||
+ of_node_cmp(ce_1->np->full_name, ce_2->np->full_name))
+ continue;
+
+ fn_1 = kasprintf(GFP_KERNEL, "%pOF", ce_1->np);
+ fn_2 = kasprintf(GFP_KERNEL, "%pOF", ce_2->np);
+ node_path_match = !strcmp(fn_1, fn_2);
+ kfree(fn_1);
+ kfree(fn_2);
+ if (node_path_match) {
+ pr_err("ERROR: multiple overlay fragments add and/or delete node %pOF\n",
+ ce_1->np);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int find_dup_cset_prop(struct overlay_changeset *ovcs,
+ struct of_changeset_entry *ce_1)
+{
+ struct of_changeset_entry *ce_2;
+ char *fn_1, *fn_2;
+ int node_path_match;
+
+ if (ce_1->action != OF_RECONFIG_ADD_PROPERTY &&
+ ce_1->action != OF_RECONFIG_REMOVE_PROPERTY &&
+ ce_1->action != OF_RECONFIG_UPDATE_PROPERTY)
+ return 0;
+
+ ce_2 = ce_1;
+ list_for_each_entry_continue(ce_2, &ovcs->cset.entries, node) {
+ if ((ce_2->action != OF_RECONFIG_ADD_PROPERTY &&
+ ce_2->action != OF_RECONFIG_REMOVE_PROPERTY &&
+ ce_2->action != OF_RECONFIG_UPDATE_PROPERTY) ||
+ of_node_cmp(ce_1->np->full_name, ce_2->np->full_name))
+ continue;
+
+ fn_1 = kasprintf(GFP_KERNEL, "%pOF", ce_1->np);
+ fn_2 = kasprintf(GFP_KERNEL, "%pOF", ce_2->np);
+ node_path_match = !strcmp(fn_1, fn_2);
+ kfree(fn_1);
+ kfree(fn_2);
+ if (node_path_match &&
+ !of_prop_cmp(ce_1->prop->name, ce_2->prop->name)) {
+ pr_err("ERROR: multiple overlay fragments add, update, and/or delete property %pOF/%s\n",
+ ce_1->np, ce_1->prop->name);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
/**
- * check_changeset_dup_add_node() - changeset validation: duplicate add node
+ * changeset_dup_entry_check() - check for duplicate entries
* @ovcs: Overlay changeset
*
- * Check changeset @ovcs->cset for multiple add node entries for the same
- * node.
+ * Check changeset @ovcs->cset for multiple {add or delete} node entries for
+ * the same node or duplicate {add, delete, or update} properties entries
+ * for the same property.
*
- * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
- * invalid overlay in @ovcs->fragments[].
+ * Returns 0 on success, or -EINVAL if duplicate changeset entry found.
*/
-static int check_changeset_dup_add_node(struct overlay_changeset *ovcs)
+static int changeset_dup_entry_check(struct overlay_changeset *ovcs)
{
- struct of_changeset_entry *ce_1, *ce_2;
- char *fn_1, *fn_2;
- int name_match;
+ struct of_changeset_entry *ce_1;
+ int dup_entry = 0;
list_for_each_entry(ce_1, &ovcs->cset.entries, node) {
-
- if (ce_1->action == OF_RECONFIG_ATTACH_NODE ||
- ce_1->action == OF_RECONFIG_DETACH_NODE) {
-
- ce_2 = ce_1;
- list_for_each_entry_continue(ce_2, &ovcs->cset.entries, node) {
- if (ce_2->action == OF_RECONFIG_ATTACH_NODE ||
- ce_2->action == OF_RECONFIG_DETACH_NODE) {
- /* inexpensive name compare */
- if (!of_node_cmp(ce_1->np->full_name,
- ce_2->np->full_name)) {
- /* expensive full path name compare */
- fn_1 = kasprintf(GFP_KERNEL, "%pOF", ce_1->np);
- fn_2 = kasprintf(GFP_KERNEL, "%pOF", ce_2->np);
- name_match = !strcmp(fn_1, fn_2);
- kfree(fn_1);
- kfree(fn_2);
- if (name_match) {
- pr_err("ERROR: multiple overlay fragments add and/or delete node %pOF\n",
- ce_1->np);
- return -EINVAL;
- }
- }
- }
- }
- }
+ dup_entry |= find_dup_cset_node_entry(ovcs, ce_1);
+ dup_entry |= find_dup_cset_prop(ovcs, ce_1);
}
- return 0;
+ return dup_entry ? -EINVAL : 0;
}
/**
@@ -617,7 +661,7 @@ static int build_changeset(struct overlay_changeset *ovcs)
}
}
- return check_changeset_dup_add_node(ovcs);
+ return changeset_dup_entry_check(ovcs);
}
/*
diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index 166dbdbfd1c5..9b6807065827 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_OF_OVERLAY) += overlay.dtb.o \
overlay_13.dtb.o \
overlay_15.dtb.o \
overlay_bad_add_dup_node.dtb.o \
+ overlay_bad_add_dup_prop.dtb.o \
overlay_bad_phandle.dtb.o \
overlay_bad_symbol.dtb.o \
overlay_base.dtb.o
diff --git a/drivers/of/unittest-data/overlay_bad_add_dup_prop.dts b/drivers/of/unittest-data/overlay_bad_add_dup_prop.dts
new file mode 100644
index 000000000000..c190da54f175
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_bad_add_dup_prop.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/*
+ * &electric_1/motor-1 and &spin_ctrl_1 are the same node:
+ * /testcase-data-2/substation@100/motor-1
+ *
+ * Thus the property "rpm_avail" in each fragment will
+ * result in an attempt to update the same property twice.
+ * This will result in an error and the overlay apply
+ * will fail.
+ */
+
+&electric_1 {
+
+ motor-1 {
+ rpm_avail = < 100 >;
+ };
+};
+
+&spin_ctrl_1 {
+ rpm_avail = < 100 200 >;
+};
diff --git a/drivers/of/unittest-data/overlay_base.dts b/drivers/of/unittest-data/overlay_base.dts
index 820b79ca378a..99ab9d12d00b 100644
--- a/drivers/of/unittest-data/overlay_base.dts
+++ b/drivers/of/unittest-data/overlay_base.dts
@@ -30,6 +30,7 @@
spin_ctrl_1: motor-1 {
compatible = "ot,ferris-wheel-motor";
spin = "clockwise";
+ rpm_avail = < 50 >;
};
spin_ctrl_2: motor-8 {
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 471b8eb6e842..efd9c947f192 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -2148,6 +2148,7 @@ struct overlay_info {
OVERLAY_INFO_EXTERN(overlay_13);
OVERLAY_INFO_EXTERN(overlay_15);
OVERLAY_INFO_EXTERN(overlay_bad_add_dup_node);
+OVERLAY_INFO_EXTERN(overlay_bad_add_dup_prop);
OVERLAY_INFO_EXTERN(overlay_bad_phandle);
OVERLAY_INFO_EXTERN(overlay_bad_symbol);
@@ -2171,6 +2172,7 @@ struct overlay_info {
OVERLAY_INFO(overlay_13, 0),
OVERLAY_INFO(overlay_15, 0),
OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL),
+ OVERLAY_INFO(overlay_bad_add_dup_prop, -EINVAL),
OVERLAY_INFO(overlay_bad_phandle, -EINVAL),
OVERLAY_INFO(overlay_bad_symbol, -EINVAL),
{}
@@ -2418,6 +2420,9 @@ static __init void of_unittest_overlay_high_level(void)
unittest(overlay_data_apply("overlay_bad_add_dup_node", NULL),
"Adding overlay 'overlay_bad_add_dup_node' failed\n");
+ unittest(overlay_data_apply("overlay_bad_add_dup_prop", NULL),
+ "Adding overlay 'overlay_bad_add_dup_prop' failed\n");
+
unittest(overlay_data_apply("overlay_bad_phandle", NULL),
"Adding overlay 'overlay_bad_phandle' failed\n");
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 14/18] of: unittest: remove unused of_unittest_apply_overlay() argument
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
Argument unittest_nr is not used in of_unittest_apply_overlay(),
remove it.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/unittest.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index efd9c947f192..6d80f474c8f2 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -1419,8 +1419,7 @@ static void of_unittest_destroy_tracked_overlays(void)
} while (defers > 0);
}
-static int __init of_unittest_apply_overlay(int overlay_nr, int unittest_nr,
- int *overlay_id)
+static int __init of_unittest_apply_overlay(int overlay_nr, int *overlay_id)
{
const char *overlay_name;
@@ -1453,7 +1452,7 @@ static int __init of_unittest_apply_overlay_check(int overlay_nr,
}
ovcs_id = 0;
- ret = of_unittest_apply_overlay(overlay_nr, unittest_nr, &ovcs_id);
+ ret = of_unittest_apply_overlay(overlay_nr, &ovcs_id);
if (ret != 0) {
/* of_unittest_apply_overlay already called unittest() */
return ret;
@@ -1489,7 +1488,7 @@ static int __init of_unittest_apply_revert_overlay_check(int overlay_nr,
/* apply the overlay */
ovcs_id = 0;
- ret = of_unittest_apply_overlay(overlay_nr, unittest_nr, &ovcs_id);
+ ret = of_unittest_apply_overlay(overlay_nr, &ovcs_id);
if (ret != 0) {
/* of_unittest_apply_overlay already called unittest() */
return ret;
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 15/18] of: overlay: set node fields from properties when add new overlay node
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
Overlay nodes added by add_changeset_node() do not have the node
fields name, phandle, and type set.
The node passed to __of_attach_node() when the add node changeset
entry is processed does not contain any properties. The node's
properties are located in add property changeset entries that will
be processed after the add node changeset is applied.
Set the node's fields in the node contained in the add node
changeset entry and do not set them to incorrect values in
add_changeset_node().
A visible symptom that is fixed by this patch is the names of nodes
added by overlays that have an entry in /sys/bus/platform/drivers/*/
will contain the unit-address but the node-name will be <NULL>, for
example, "fc4ab000.<NULL>". After applying the patch the name, in
this example, for node restart@fc4ab000 is "fc4ab000.restart".
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/dynamic.c | 27 ++++++++++++++++++---------
drivers/of/overlay.c | 29 ++++++++++++++++++++++++-----
2 files changed, 42 insertions(+), 14 deletions(-)
diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index 5f7c99b9de0d..5b740114dbdc 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -205,15 +205,24 @@ static void __of_attach_node(struct device_node *np)
const __be32 *phandle;
int sz;
- np->name = __of_get_property(np, "name", NULL) ? : "<NULL>";
- np->type = __of_get_property(np, "device_type", NULL) ? : "<NULL>";
-
- phandle = __of_get_property(np, "phandle", &sz);
- if (!phandle)
- phandle = __of_get_property(np, "linux,phandle", &sz);
- if (IS_ENABLED(CONFIG_PPC_PSERIES) && !phandle)
- phandle = __of_get_property(np, "ibm,phandle", &sz);
- np->phandle = (phandle && (sz >= 4)) ? be32_to_cpup(phandle) : 0;
+ if (!of_node_check_flag(np, OF_OVERLAY)) {
+ np->name = __of_get_property(np, "name", NULL);
+ np->type = __of_get_property(np, "device_type", NULL);
+ if (!np->name)
+ np->name = "<NULL>";
+ if (!np->type)
+ np->type = "<NULL>";
+
+ phandle = __of_get_property(np, "phandle", &sz);
+ if (!phandle)
+ phandle = __of_get_property(np, "linux,phandle", &sz);
+ if (IS_ENABLED(CONFIG_PPC_PSERIES) && !phandle)
+ phandle = __of_get_property(np, "ibm,phandle", &sz);
+ if (phandle && (sz >= 4))
+ np->phandle = be32_to_cpup(phandle);
+ else
+ np->phandle = 0;
+ }
np->child = NULL;
np->sibling = np->parent->child;
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 908bcc62019b..f5c3330567b6 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -307,10 +307,11 @@ static int add_changeset_property(struct overlay_changeset *ovcs,
int ret = 0;
bool check_for_non_overlay_node = false;
- if (!of_prop_cmp(overlay_prop->name, "name") ||
- !of_prop_cmp(overlay_prop->name, "phandle") ||
- !of_prop_cmp(overlay_prop->name, "linux,phandle"))
- return 0;
+ if (target->in_livetree)
+ if (!of_prop_cmp(overlay_prop->name, "name") ||
+ !of_prop_cmp(overlay_prop->name, "phandle") ||
+ !of_prop_cmp(overlay_prop->name, "linux,phandle"))
+ return 0;
if (target->in_livetree)
prop = of_find_property(target->np, overlay_prop->name, NULL);
@@ -331,6 +332,10 @@ static int add_changeset_property(struct overlay_changeset *ovcs,
if (!prop) {
check_for_non_overlay_node = true;
+ if (!target->in_livetree) {
+ new_prop->next = target->np->deadprops;
+ target->np->deadprops = new_prop;
+ }
ret = of_changeset_add_property(&ovcs->cset, target->np,
new_prop);
@@ -406,9 +411,10 @@ static int add_changeset_node(struct overlay_changeset *ovcs,
struct target *target, struct device_node *node)
{
const char *node_kbasename;
+ const __be32 *phandle;
struct device_node *tchild;
struct target target_child;
- int ret = 0;
+ int ret = 0, size;
node_kbasename = kbasename(node->full_name);
@@ -422,6 +428,19 @@ static int add_changeset_node(struct overlay_changeset *ovcs,
return -ENOMEM;
tchild->parent = target->np;
+ tchild->name = __of_get_property(node, "name", NULL);
+ tchild->type = __of_get_property(node, "device_type", NULL);
+
+ if (!tchild->name)
+ tchild->name = "<NULL>";
+ if (!tchild->type)
+ tchild->type = "<NULL>";
+
+ /* ignore obsolete "linux,phandle" */
+ phandle = __of_get_property(node, "phandle", &size);
+ if (phandle && (size == 4))
+ tchild->phandle = be32_to_cpup(phandle);
+
of_node_set_flag(tchild, OF_OVERLAY);
ret = of_changeset_attach_node(&ovcs->cset, tchild);
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 16/18] of: unittest: allow base devicetree to have symbol metadata
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
The overlay metadata nodes in the FDT created from testcases.dts
are not handled properly.
The __fixups__ and __local_fixups__ node were added to the live
devicetree, but should not be.
Only the first property in the /__symbols__ node was added to the
live devicetree if the live devicetree already contained a
/__symbols node. All of the node's properties must be added.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/unittest.c | 43 +++++++++++++++++++++++++++++++++++--------
1 file changed, 35 insertions(+), 8 deletions(-)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 6d80f474c8f2..1c2bd8503095 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -1057,20 +1057,44 @@ static void __init of_unittest_platform_populate(void)
* of np into dup node (present in live tree) and
* updates parent of children of np to dup.
*
- * @np: node already present in live tree
+ * @np: node whose properties are being added to the live tree
* @dup: node present in live tree to be updated
*/
static void update_node_properties(struct device_node *np,
struct device_node *dup)
{
struct property *prop;
+ struct property *save_next;
struct device_node *child;
-
- for_each_property_of_node(np, prop)
- of_add_property(dup, prop);
+ int ret;
for_each_child_of_node(np, child)
child->parent = dup;
+
+ /*
+ * "unittest internal error: unable to add testdata property"
+ *
+ * If this message reports a property in node '/__symbols__' then
+ * the respective unittest overlay contains a label that has the
+ * same name as a label in the live devicetree. The label will
+ * be in the live devicetree only if the devicetree source was
+ * compiled with the '-@' option. If you encounter this error,
+ * please consider renaming __all__ of the labels in the unittest
+ * overlay dts files with an odd prefix that is unlikely to be
+ * used in a real devicetree.
+ */
+
+ /*
+ * open code for_each_property_of_node() because of_add_property()
+ * sets prop->next to NULL
+ */
+ for (prop = np->properties; prop != NULL; prop = save_next) {
+ save_next = prop->next;
+ ret = of_add_property(dup, prop);
+ if (ret)
+ pr_err("unittest internal error: unable to add testdata property %pOF/%s",
+ np, prop->name);
+ }
}
/**
@@ -1079,18 +1103,23 @@ static void update_node_properties(struct device_node *np,
*
* @np: Node to attach to live tree
*/
-static int attach_node_and_children(struct device_node *np)
+static void attach_node_and_children(struct device_node *np)
{
struct device_node *next, *dup, *child;
unsigned long flags;
const char *full_name;
full_name = kasprintf(GFP_KERNEL, "%pOF", np);
+
+ if (!strcmp(full_name, "/__local_fixups__") ||
+ !strcmp(full_name, "/__fixups__"))
+ return;
+
dup = of_find_node_by_path(full_name);
kfree(full_name);
if (dup) {
update_node_properties(np, dup);
- return 0;
+ return;
}
child = np->child;
@@ -1111,8 +1140,6 @@ static int attach_node_and_children(struct device_node *np)
attach_node_and_children(child);
child = next;
}
-
- return 0;
}
/**
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 17/18] of: unittest: find overlays[] entry by name instead of index
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
One accessor of overlays[] was using a hard coded index value to
find the correct array entry instead of searching for the entry
containing the correct name.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/unittest.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 1c2bd8503095..785985bdbfa6 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -2178,7 +2178,7 @@ struct overlay_info {
OVERLAY_INFO_EXTERN(overlay_bad_phandle);
OVERLAY_INFO_EXTERN(overlay_bad_symbol);
-/* order of entries is hard-coded into users of overlays[] */
+/* entries found by name */
static struct overlay_info overlays[] = {
OVERLAY_INFO(overlay_base, -9999),
OVERLAY_INFO(overlay, 0),
@@ -2201,7 +2201,8 @@ struct overlay_info {
OVERLAY_INFO(overlay_bad_add_dup_prop, -EINVAL),
OVERLAY_INFO(overlay_bad_phandle, -EINVAL),
OVERLAY_INFO(overlay_bad_symbol, -EINVAL),
- {}
+ /* end marker */
+ {.dtb_begin = NULL, .dtb_end = NULL, .expected_result = 0, .name = NULL}
};
static struct device_node *overlay_base_root;
@@ -2231,6 +2232,19 @@ void __init unittest_unflatten_overlay_base(void)
u32 data_size;
void *new_fdt;
u32 size;
+ int found = 0;
+ const char *overlay_name = "overlay_base";
+
+ for (info = overlays; info && info->name; info++) {
+ if (!strcmp(overlay_name, info->name)) {
+ found = 1;
+ break;
+ }
+ }
+ if (!found) {
+ pr_err("no overlay data for %s\n", overlay_name);
+ return;
+ }
info = &overlays[0];
@@ -2278,11 +2292,10 @@ static int __init overlay_data_apply(const char *overlay_name, int *overlay_id)
{
struct overlay_info *info;
int found = 0;
- int k;
int ret;
u32 size;
- for (k = 0, info = overlays; info && info->name; info++, k++) {
+ for (info = overlays; info && info->name; info++) {
if (!strcmp(overlay_name, info->name)) {
found = 1;
break;
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* [PATCH v3 18/18] of: unittest: initialize args before calling of_*parse_*()
From: frowand.list @ 2018-10-15 0:24 UTC (permalink / raw)
To: Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer,
Guenter Roeck
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <1539563070-12969-1-git-send-email-frowand.list@gmail.com>
From: Frank Rowand <frank.rowand@sony.com>
Callers of of_irq_parse_one() blindly use the pointer args.np
without checking whether of_irq_parse_one() had an error and
thus did not set the value of args.np. Initialize args to
zero so that using the format "%pOF" to show the value of
args.np will show "(null)" when of_irq_parse_one() has an
error. This prevents the dereference of a random value.
Make the same fix for callers of of_parse_phandle_with_args()
and of_parse_phandle_with_args_map().
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/unittest.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 785985bdbfa6..5f4db23e4752 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -375,6 +375,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
for (i = 0; i < 8; i++) {
bool passed = true;
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args(np, "phandle-list",
"#phandle-cells", i, &args);
@@ -428,6 +429,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
}
/* Check for missing list property */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args(np, "phandle-list-missing",
"#phandle-cells", 0, &args);
unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc);
@@ -436,6 +438,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc);
/* Check for missing cells property */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args(np, "phandle-list",
"#phandle-cells-missing", 0, &args);
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
@@ -444,6 +447,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
/* Check for bad phandle in list */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args(np, "phandle-list-bad-phandle",
"#phandle-cells", 0, &args);
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
@@ -452,6 +456,7 @@ static void __init of_unittest_parse_phandle_with_args(void)
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
/* Check for incorrectly formed argument list */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args(np, "phandle-list-bad-args",
"#phandle-cells", 1, &args);
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
@@ -502,6 +507,7 @@ static void __init of_unittest_parse_phandle_with_args_map(void)
for (i = 0; i < 8; i++) {
bool passed = true;
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args_map(np, "phandle-list",
"phandle", i, &args);
@@ -559,21 +565,25 @@ static void __init of_unittest_parse_phandle_with_args_map(void)
}
/* Check for missing list property */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args_map(np, "phandle-list-missing",
"phandle", 0, &args);
unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc);
/* Check for missing cells,map,mask property */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args_map(np, "phandle-list",
"phandle-missing", 0, &args);
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
/* Check for bad phandle in list */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args_map(np, "phandle-list-bad-phandle",
"phandle", 0, &args);
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
/* Check for incorrectly formed argument list */
+ memset(&args, 0, sizeof(args));
rc = of_parse_phandle_with_args_map(np, "phandle-list-bad-args",
"phandle", 1, &args);
unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
@@ -780,7 +790,7 @@ static void __init of_unittest_parse_interrupts(void)
for (i = 0; i < 4; i++) {
bool passed = true;
- args.args_count = 0;
+ memset(&args, 0, sizeof(args));
rc = of_irq_parse_one(np, i, &args);
passed &= !rc;
@@ -801,7 +811,7 @@ static void __init of_unittest_parse_interrupts(void)
for (i = 0; i < 4; i++) {
bool passed = true;
- args.args_count = 0;
+ memset(&args, 0, sizeof(args));
rc = of_irq_parse_one(np, i, &args);
/* Test the values from tests-phandle.dtsi */
@@ -854,6 +864,7 @@ static void __init of_unittest_parse_interrupts_extended(void)
for (i = 0; i < 7; i++) {
bool passed = true;
+ memset(&args, 0, sizeof(args));
rc = of_irq_parse_one(np, i, &args);
/* Test the values from tests-phandle.dtsi */
--
Frank Rowand <frank.rowand@sony.com>
^ permalink raw reply related
* Re: [PATCH v2 12/18] of: overlay: check prevents multiple fragments add or delete same node
From: Frank Rowand @ 2018-10-15 0:29 UTC (permalink / raw)
To: Joe Perches, Rob Herring, Pantelis Antoniou, Michael Ellerman,
Benjamin Herrenschmidt, Paul Mackerras, Alan Tull, Moritz Fischer
Cc: devicetree, linux-fpga, linuxppc-dev, linux-kernel
In-Reply-To: <651a8488-caec-b153-43c7-1fb81f641f1a@gmail.com>
On 10/13/18 11:21, Frank Rowand wrote:
> On 10/13/18 05:51, Joe Perches wrote:
>> On Fri, 2018-10-12 at 21:53 -0700, frowand.list@gmail.com wrote:
>>> From: Frank Rowand <frank.rowand@sony.com>
>>>
>>> Multiple overlay fragments adding or deleting the same node is not
>>> supported. Replace code comment of such, with check to detect the
>>> attempt and fail the overlay apply.
>>>
>>> Devicetree unittest where multiple fragments added the same node was
>>> added in the previous patch in the series. After applying this patch
>>> the unittest messages will no longer include:
>>>
>>> Duplicate name in motor-1, renamed to "controller#1"
>>> OF: overlay: of_overlay_apply() err=0
>>> ### dt-test ### of_overlay_fdt_apply() expected -22, ret=0, overlay_bad_add_dup_node
>>> ### dt-test ### FAIL of_unittest_overlay_high_level():2419 Adding overlay 'overlay_bad_add_dup_node' failed
>>>
>>> ...
>>>
>>> ### dt-test ### end of unittest - 210 passed, 1 failed
>>>
>>> but will instead include:
>>>
>>> OF: overlay: ERROR: multiple overlay fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller
>>>
>>> ...
>>>
>>> ### dt-test ### end of unittest - 211 passed, 0 failed
>> []
>>> diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
>> []
>>> @@ -523,6 +515,54 @@ static int build_changeset_symbols_node(struct overlay_changeset *ovcs,
>>> }
>>>
>>> /**
>>> + * check_changeset_dup_add_node() - changeset validation: duplicate add node
>>> + * @ovcs: Overlay changeset
>>> + *
>>> + * Check changeset @ovcs->cset for multiple add node entries for the same
>>> + * node.
>>> + *
>>> + * Returns 0 on success, -ENOMEM if memory allocation failure, or -EINVAL if
>>> + * invalid overlay in @ovcs->fragments[].
>>> + */
>>> +static int check_changeset_dup_add_node(struct overlay_changeset *ovcs)
>>> +{
>>> + struct of_changeset_entry *ce_1, *ce_2;
>>> + char *fn_1, *fn_2;
>>> + int name_match;
>>> +
>>> + list_for_each_entry(ce_1, &ovcs->cset.entries, node) {
>>> +
>>> + if (ce_1->action == OF_RECONFIG_ATTACH_NODE ||
>>> + ce_1->action == OF_RECONFIG_DETACH_NODE) {
>>> +
>>> + ce_2 = ce_1;
>>> + list_for_each_entry_continue(ce_2, &ovcs->cset.entries, node) {
>>> + if (ce_2->action == OF_RECONFIG_ATTACH_NODE ||
>>> + ce_2->action == OF_RECONFIG_DETACH_NODE) {
>>> + /* inexpensive name compare */
>>> + if (!of_node_cmp(ce_1->np->full_name,
>>> + ce_2->np->full_name)) {
>>
>> A bit of odd indentation here.
>> This line is normally aligned to the second ( on the line above.
>
> Yes, thanks.
This line gets joined into a single line in version 3, so I will leave
the bad formatting in patch 12 to make my life easier when moving
to version 3.
>>
>>> + /* expensive full path name compare */
>>> + fn_1 = kasprintf(GFP_KERNEL, "%pOF", ce_1->np);
>>> + fn_2 = kasprintf(GFP_KERNEL, "%pOF", ce_2->np);
>>> + name_match = !strcmp(fn_1, fn_2);
>>> + kfree(fn_1);
>>> + kfree(fn_2);
>>> + if (name_match) {
>>> + pr_err("ERROR: multiple overlay fragments add and/or delete node %pOF\n",
>>> + ce_1->np);
>>> + return -EINVAL;
>>> + }
>>> + }
>>> + }
>>> + }
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +}
>>
>> Style trivia:
>>
>> Using inverted tests and continue would reduce indentation.
>
> Yes, thanks.
In version 3, fixed in patch 13/18 instead of 12/18, where this pattern
has been split into two functions.
-Frank
>
> -Frank
>
>
>>
>> list_for_each_entry(ce_1, &ovcs->cset.entries, node) {
>> if (ce_1->action != OF_RECONFIG_ATTACH_NODE &&
>> ce_1->action != OF_RECONFIG_DETACH_NODE)
>> continue;
>>
>> ce_2 = ce_1;
>> list_for_each_entry_continue(ce_2, &ovcs->cset.entries, node) {
>> if (ce_2->action != OF_RECONFIG_ATTACH_NODE &&
>> ce_2->action != OF_RECONFIG_DETACH_NODE)
>> continue;
>>
>> /* inexpensive name compare */
>> if (of_node_cmp(ce_1->np->full_name, ce_2->np->full_name))
>> continue;
>>
>> /* expensive full path name compare */
>> fn_1 = kasprintf(GFP_KERNEL, "%pOF", ce_1->np);
>> fn_2 = kasprintf(GFP_KERNEL, "%pOF", ce_2->np);
>> name_match = !strcmp(fn_1, fn_2);
>> kfree(fn_1);
>> kfree(fn_2);
>> if (name_match) {
>> pr_err("ERROR: multiple overlay fragments add and/or delete node %pOF\n",
>> ce_1->np);
>> return -EINVAL;
>> }
>> }
>> }
>>
>>
>>
>
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox