* Re: [PATCH] soc: fsl: guts: make fsl_guts_get_svr() static
From: Li Yang @ 2019-02-26 17:43 UTC (permalink / raw)
To: Y.b. Lu
Cc: linux-arm-kernel@lists.infradead.org,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
Horia Geanta
In-Reply-To: <VI1PR0401MB2237C56CD38D546E83218C8FF87F0@VI1PR0401MB2237.eurprd04.prod.outlook.com>
On Fri, Feb 22, 2019 at 2:09 AM Y.b. Lu <yangbo.lu@nxp.com> wrote:
>
>
>
> > -----Original Message-----
> > From: Horia Geantă <horia.geanta@nxp.com>
> > Sent: Thursday, February 21, 2019 6:38 PM
> > To: Leo Li <leoyang.li@nxp.com>
> > Cc: Y.b. Lu <yangbo.lu@nxp.com>; linuxppc-dev@lists.ozlabs.org;
> > linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> > Subject: [PATCH] soc: fsl: guts: make fsl_guts_get_svr() static
> >
> > The export of fsl_guts_get_svr() is a left-over, it's currently used only internally
> > and users needing SoC information should use the generic soc_device
> > infrastructure.
> >
>
> [Y.b. Lu] Acked-by: Yangbo Lu <yangbo.lu@nxp.com>
Applied for next. Thanks.
>
> > Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
> > ---
> > drivers/soc/fsl/guts.c | 3 +--
> > include/linux/fsl/guts.h | 2 --
> > 2 files changed, 1 insertion(+), 4 deletions(-)
> >
> > diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c index
> > 4f9655087bd7..63f6df86f9e5 100644
> > --- a/drivers/soc/fsl/guts.c
> > +++ b/drivers/soc/fsl/guts.c
> > @@ -115,7 +115,7 @@ static const struct fsl_soc_die_attr
> > *fsl_soc_die_match(
> > return NULL;
> > }
> >
> > -u32 fsl_guts_get_svr(void)
> > +static u32 fsl_guts_get_svr(void)
> > {
> > u32 svr = 0;
> >
> > @@ -129,7 +129,6 @@ u32 fsl_guts_get_svr(void)
> >
> > return svr;
> > }
> > -EXPORT_SYMBOL(fsl_guts_get_svr);
> >
> > static int fsl_guts_probe(struct platform_device *pdev) { diff --git
> > a/include/linux/fsl/guts.h b/include/linux/fsl/guts.h index
> > 941b11811f85..1fc0edd71c52 100644
> > --- a/include/linux/fsl/guts.h
> > +++ b/include/linux/fsl/guts.h
> > @@ -135,8 +135,6 @@ struct ccsr_guts {
> > u32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */
> > } __attribute__ ((packed));
> >
> > -u32 fsl_guts_get_svr(void);
> > -
> > /* Alternate function signal multiplex control */ #define
> > MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))
> >
> > --
> > 2.16.2
>
^ permalink raw reply
* [PATCH v8 10/11] powerpc/32s: move hash code patching out of MMU_init_hw()
From: Christophe Leroy @ 2019-02-26 17:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Nicholas Piggin, Aneesh Kumar K.V, Andrey Ryabinin,
Alexander Potapenko, Dmitry Vyukov, Daniel Axtens
Cc: linux-mm, linuxppc-dev, linux-kernel, kasan-dev
In-Reply-To: <cover.1551161392.git.christophe.leroy@c-s.fr>
For KASAN, hash table handling will be activated early for
accessing to KASAN shadow areas.
In order to avoid any modification of the hash functions while
they are still used with the early hash table, the code patching
is moved out of MMU_init_hw() and put close to the big-bang switch
to the final hash table.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/head_32.S | 3 +++
arch/powerpc/mm/mmu_decl.h | 1 +
arch/powerpc/mm/ppc_mmu_32.c | 36 ++++++++++++++++++++++--------------
3 files changed, 26 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 02229c005853..e644aab2cf5b 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -960,6 +960,9 @@ start_here:
bl machine_init
bl __save_cpu_setup
bl MMU_init
+BEGIN_MMU_FTR_SECTION
+ bl MMU_init_hw_patch
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
/*
* Go back to running unmapped so we can load up new values
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 74ff61dabcb1..d726ff776054 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -130,6 +130,7 @@ extern void wii_memory_fixups(void);
*/
#ifdef CONFIG_PPC32
extern void MMU_init_hw(void);
+void MMU_init_hw_patch(void);
unsigned long mmu_mapin_ram(unsigned long base, unsigned long top);
#endif
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 2d5b0d50fb31..38c0e28c21e1 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -39,6 +39,7 @@
struct hash_pte *Hash, *Hash_end;
unsigned long Hash_size, Hash_mask;
unsigned long _SDR1;
+static unsigned int hash_mb, hash_mb2;
struct ppc_bat BATS[8][2]; /* 8 pairs of IBAT, DBAT */
@@ -308,7 +309,6 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
*/
void __init MMU_init_hw(void)
{
- unsigned int hmask, mb, mb2;
unsigned int n_hpteg, lg_n_hpteg;
if (!mmu_has_feature(MMU_FTR_HPTE_TABLE))
@@ -349,20 +349,30 @@ void __init MMU_init_hw(void)
(unsigned long long)(total_memory >> 20), Hash_size >> 10, Hash);
- /*
- * Patch up the instructions in hashtable.S:create_hpte
- */
- if ( ppc_md.progress ) ppc_md.progress("hash:patch", 0x345);
Hash_mask = n_hpteg - 1;
- hmask = Hash_mask >> (16 - LG_HPTEG_SIZE);
- mb2 = mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg;
+ hash_mb2 = hash_mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg;
if (lg_n_hpteg > 16)
- mb2 = 16 - LG_HPTEG_SIZE;
+ hash_mb2 = 16 - LG_HPTEG_SIZE;
+}
+
+void __init MMU_init_hw_patch(void)
+{
+ unsigned int hmask = Hash_mask >> (16 - LG_HPTEG_SIZE);
+ if (ppc_md.progress)
+ ppc_md.progress("hash:patch", 0x345);
+ if (ppc_md.progress)
+ ppc_md.progress("hash:done", 0x205);
+
+ /* WARNING: Make sure nothing can trigger a KASAN check past this point */
+
+ /*
+ * Patch up the instructions in hashtable.S:create_hpte
+ */
modify_instruction_site(&patch__hash_page_A0, 0xffff,
((unsigned int)Hash - PAGE_OFFSET) >> 16);
- modify_instruction_site(&patch__hash_page_A1, 0x7c0, mb << 6);
- modify_instruction_site(&patch__hash_page_A2, 0x7c0, mb2 << 6);
+ modify_instruction_site(&patch__hash_page_A1, 0x7c0, hash_mb << 6);
+ modify_instruction_site(&patch__hash_page_A2, 0x7c0, hash_mb2 << 6);
modify_instruction_site(&patch__hash_page_B, 0xffff, hmask);
modify_instruction_site(&patch__hash_page_C, 0xffff, hmask);
@@ -371,11 +381,9 @@ void __init MMU_init_hw(void)
*/
modify_instruction_site(&patch__flush_hash_A0, 0xffff,
((unsigned int)Hash - PAGE_OFFSET) >> 16);
- modify_instruction_site(&patch__flush_hash_A1, 0x7c0, mb << 6);
- modify_instruction_site(&patch__flush_hash_A2, 0x7c0, mb2 << 6);
+ modify_instruction_site(&patch__flush_hash_A1, 0x7c0, hash_mb << 6);
+ modify_instruction_site(&patch__flush_hash_A2, 0x7c0, hash_mb2 << 6);
modify_instruction_site(&patch__flush_hash_B, 0xffff, hmask);
-
- if ( ppc_md.progress ) ppc_md.progress("hash:done", 0x205);
}
void setup_initial_memory_limit(phys_addr_t first_memblock_base,
--
2.13.3
^ permalink raw reply related
* [PATCH v8 11/11] powerpc/32s: set up an early static hash table for KASAN.
From: Christophe Leroy @ 2019-02-26 17:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Nicholas Piggin, Aneesh Kumar K.V, Andrey Ryabinin,
Alexander Potapenko, Dmitry Vyukov, Daniel Axtens
Cc: linux-mm, linuxppc-dev, linux-kernel, kasan-dev
In-Reply-To: <cover.1551161392.git.christophe.leroy@c-s.fr>
KASAN requires early activation of hash table, before memblock()
functions are available.
This patch implements an early hash_table statically defined in
__initdata.
During early boot, a single page table is used. For hash32, when doing
the final init, one page table is allocated for each PGD entry because
of the _PAGE_HASHPTE flag which can't be common to several virt pages.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/head_32.S | 40 ++++++++++++++++++++++++++---------
arch/powerpc/mm/kasan/kasan_init_32.c | 32 ++++++++++++++++++++++++----
arch/powerpc/mm/mmu_decl.h | 1 +
3 files changed, 59 insertions(+), 14 deletions(-)
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index e644aab2cf5b..65c9e8819da1 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -160,6 +160,10 @@ __after_mmu_off:
bl flush_tlbs
bl initial_bats
+ bl load_segment_registers
+#ifdef CONFIG_KASAN
+ bl early_hash_table
+#endif
#if defined(CONFIG_BOOTX_TEXT)
bl setup_disp_bat
#endif
@@ -205,7 +209,7 @@ __after_mmu_off:
*/
turn_on_mmu:
mfmsr r0
- ori r0,r0,MSR_DR|MSR_IR
+ ori r0,r0,MSR_DR|MSR_IR|MSR_RI
mtspr SPRN_SRR1,r0
lis r0,start_here@h
ori r0,r0,start_here@l
@@ -881,11 +885,24 @@ _ENTRY(__restore_cpu_setup)
blr
#endif /* !defined(CONFIG_PPC_BOOK3S_32) */
-
/*
* Load stuff into the MMU. Intended to be called with
* IR=0 and DR=0.
*/
+#ifdef CONFIG_KASAN
+early_hash_table:
+ sync /* Force all PTE updates to finish */
+ isync
+ tlbia /* Clear all TLB entries */
+ sync /* wait for tlbia/tlbie to finish */
+ TLBSYNC /* ... on all CPUs */
+ /* Load the SDR1 register (hash table base & size) */
+ lis r6, early_hash - PAGE_OFFSET@h
+ ori r6, r6, 3 /* 256kB table */
+ mtspr SPRN_SDR1, r6
+ blr
+#endif
+
load_up_mmu:
sync /* Force all PTE updates to finish */
isync
@@ -897,14 +914,6 @@ load_up_mmu:
tophys(r6,r6)
lwz r6,_SDR1@l(r6)
mtspr SPRN_SDR1,r6
- li r0,16 /* load up segment register values */
- mtctr r0 /* for context 0 */
- lis r3,0x2000 /* Ku = 1, VSID = 0 */
- li r4,0
-3: mtsrin r3,r4
- addi r3,r3,0x111 /* increment VSID */
- addis r4,r4,0x1000 /* address of next segment */
- bdnz 3b
/* Load the BAT registers with the values set up by MMU_init.
MMU_init takes care of whether we're on a 601 or not. */
@@ -926,6 +935,17 @@ BEGIN_MMU_FTR_SECTION
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
blr
+load_segment_registers:
+ li r0, 16 /* load up segment register values */
+ mtctr r0 /* for context 0 */
+ lis r3, 0x2000 /* Ku = 1, VSID = 0 */
+ li r4, 0
+3: mtsrin r3, r4
+ addi r3, r3, 0x111 /* increment VSID */
+ addis r4, r4, 0x1000 /* address of next segment */
+ bdnz 3b
+ blr
+
/*
* This is where the main kernel code starts.
*/
diff --git a/arch/powerpc/mm/kasan/kasan_init_32.c b/arch/powerpc/mm/kasan/kasan_init_32.c
index 42f8534ce3ea..8c25c1e8c2c8 100644
--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -60,10 +60,13 @@ static int __ref kasan_init_region(void *start, size_t size)
unsigned long k_cur;
pmd_t *pmd;
void *block = NULL;
- int ret = kasan_init_shadow_page_tables(k_start, k_end);
- if (ret)
- return ret;
+ if (!early_mmu_has_feature(MMU_FTR_HPTE_TABLE)) {
+ int ret = kasan_init_shadow_page_tables(k_start, k_end);
+
+ if (ret)
+ return ret;
+ }
if (!slab_is_available())
block = memblock_alloc(k_end - k_start, PAGE_SIZE);
@@ -94,6 +97,13 @@ void __init kasan_init(void)
int ret;
struct memblock_region *reg;
+ if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE)) {
+ ret = kasan_init_shadow_page_tables(KASAN_SHADOW_START, KASAN_SHADOW_END);
+
+ if (ret)
+ panic("kasan: kasan_init_shadow_page_tables() failed");
+ }
+
for_each_memblock(memory, reg) {
phys_addr_t base = reg->base;
phys_addr_t top = min(base + reg->size, total_lowmem);
@@ -132,6 +142,20 @@ void *module_alloc(unsigned long size)
}
#endif
+#ifdef CONFIG_PPC_BOOK3S_32
+u8 __initdata early_hash[256 << 10] __aligned(256 << 10) = {0};
+
+static void __init kasan_early_hash_table(void)
+{
+ modify_instruction_site(&patch__hash_page_A0, 0xffff, __pa(early_hash) >> 16);
+ modify_instruction_site(&patch__flush_hash_A0, 0xffff, __pa(early_hash) >> 16);
+
+ Hash = (struct hash_pte *)early_hash;
+}
+#else
+static void __init kasan_early_hash_table(void) {}
+#endif
+
void __init kasan_early_init(void)
{
unsigned long addr = KASAN_SHADOW_START;
@@ -149,5 +173,5 @@ void __init kasan_early_init(void)
} while (pmd++, addr = next, addr != end);
if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE))
- WARN(1, "KASAN not supported on hash 6xx");
+ kasan_early_hash_table();
}
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index d726ff776054..31fce3914ddc 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -106,6 +106,7 @@ extern unsigned int rtas_data, rtas_size;
struct hash_pte;
extern struct hash_pte *Hash, *Hash_end;
extern unsigned long Hash_size, Hash_mask;
+extern u8 early_hash[];
#endif /* CONFIG_PPC32 */
--
2.13.3
^ permalink raw reply related
* [PATCH v8 08/11] powerpc: disable KASAN instrumentation on early/critical files.
From: Christophe Leroy @ 2019-02-26 17:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Nicholas Piggin, Aneesh Kumar K.V, Andrey Ryabinin,
Alexander Potapenko, Dmitry Vyukov, Daniel Axtens
Cc: linux-mm, linuxppc-dev, linux-kernel, kasan-dev
In-Reply-To: <cover.1551161392.git.christophe.leroy@c-s.fr>
All files containing functions run before kasan_early_init() is called
must have KASAN instrumentation disabled.
For those file, branch profiling also have to be disabled otherwise
each if () generates a call to ftrace_likely_update().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/Makefile | 12 ++++++++++++
arch/powerpc/lib/Makefile | 8 ++++++++
arch/powerpc/mm/Makefile | 6 ++++++
arch/powerpc/platforms/powermac/Makefile | 6 ++++++
arch/powerpc/purgatory/Makefile | 3 +++
arch/powerpc/xmon/Makefile | 1 +
6 files changed, 36 insertions(+)
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 45e47752b692..0ea6c4aa3a20 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -31,6 +31,18 @@ CFLAGS_REMOVE_btext.o = $(CC_FLAGS_FTRACE)
CFLAGS_REMOVE_prom.o = $(CC_FLAGS_FTRACE)
endif
+KASAN_SANITIZE_early_32.o := n
+KASAN_SANITIZE_cputable.o := n
+KASAN_SANITIZE_prom_init.o := n
+KASAN_SANITIZE_btext.o := n
+
+ifdef CONFIG_KASAN
+CFLAGS_early_32.o += -DDISABLE_BRANCH_PROFILING
+CFLAGS_cputable.o += -DDISABLE_BRANCH_PROFILING
+CFLAGS_prom_init.o += -DDISABLE_BRANCH_PROFILING
+CFLAGS_btext.o += -DDISABLE_BRANCH_PROFILING
+endif
+
obj-y := cputable.o ptrace.o syscalls.o \
irq.o align.o signal_32.o pmc.o vdso.o \
process.o systbl.o idle.o \
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 47a4de434c22..c55f9c27bf79 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -8,6 +8,14 @@ ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC)
CFLAGS_REMOVE_code-patching.o = $(CC_FLAGS_FTRACE)
CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE)
+KASAN_SANITIZE_code-patching.o := n
+KASAN_SANITIZE_feature-fixups.o := n
+
+ifdef CONFIG_KASAN
+CFLAGS_code-patching.o += -DDISABLE_BRANCH_PROFILING
+CFLAGS_feature-fixups.o += -DDISABLE_BRANCH_PROFILING
+endif
+
obj-y += alloc.o code-patching.o feature-fixups.o
ifndef CONFIG_KASAN
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index d52ec118e09d..240d73dce6bb 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -7,6 +7,12 @@ ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC)
CFLAGS_REMOVE_slb.o = $(CC_FLAGS_FTRACE)
+KASAN_SANITIZE_ppc_mmu_32.o := n
+
+ifdef CONFIG_KASAN
+CFLAGS_ppc_mmu_32.o += -DDISABLE_BRANCH_PROFILING
+endif
+
obj-y := fault.o mem.o pgtable.o mmap.o \
init_$(BITS).o pgtable_$(BITS).o \
init-common.o mmu_context.o drmem.o
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 923bfb340433..859efbacdf06 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -2,6 +2,12 @@
CFLAGS_bootx_init.o += -fPIC
CFLAGS_bootx_init.o += $(call cc-option, -fno-stack-protector)
+KASAN_SANITIZE_bootx_init.o := n
+
+ifdef CONFIG_KASAN
+CFLAGS_bootx_init.o += -DDISABLE_BRANCH_PROFILING
+endif
+
ifdef CONFIG_FUNCTION_TRACER
# Do not trace early boot code
CFLAGS_REMOVE_bootx_init.o = $(CC_FLAGS_FTRACE)
diff --git a/arch/powerpc/purgatory/Makefile b/arch/powerpc/purgatory/Makefile
index 4314ba5baf43..7c6d8b14f440 100644
--- a/arch/powerpc/purgatory/Makefile
+++ b/arch/powerpc/purgatory/Makefile
@@ -1,4 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
+
+KASAN_SANITIZE := n
+
targets += trampoline.o purgatory.ro kexec-purgatory.c
LDFLAGS_purgatory.ro := -e purgatory_start -r --no-undefined
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index 3050f9323254..f142570ad860 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -7,6 +7,7 @@ subdir-ccflags-y := $(call cc-disable-warning, builtin-requires-header)
GCOV_PROFILE := n
KCOV_INSTRUMENT := n
UBSAN_SANITIZE := n
+KASAN_SANITIZE := n
# Disable ftrace for the entire directory
ORIG_CFLAGS := $(KBUILD_CFLAGS)
--
2.13.3
^ permalink raw reply related
* [PATCH v8 05/11] powerpc/32: use memset() instead of memset_io() to zero BSS
From: Christophe Leroy @ 2019-02-26 17:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Nicholas Piggin, Aneesh Kumar K.V, Andrey Ryabinin,
Alexander Potapenko, Dmitry Vyukov, Daniel Axtens
Cc: linux-mm, linuxppc-dev, linux-kernel, kasan-dev
In-Reply-To: <cover.1551161392.git.christophe.leroy@c-s.fr>
Since commit 400c47d81ca38 ("powerpc32: memset: only use dcbz once cache is
enabled"), memset() can be used before activation of the cache,
so no need to use memset_io() for zeroing the BSS.
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/early_32.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/early_32.c b/arch/powerpc/kernel/early_32.c
index cf3cdd81dc47..3482118ffe76 100644
--- a/arch/powerpc/kernel/early_32.c
+++ b/arch/powerpc/kernel/early_32.c
@@ -21,8 +21,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
{
unsigned long offset = reloc_offset();
- /* First zero the BSS -- use memset_io, some platforms don't have caches on yet */
- memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start);
+ /* First zero the BSS */
+ memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start);
/*
* Identify the CPU type and fix up code sections
--
2.13.3
^ permalink raw reply related
* [PATCH v8 09/11] powerpc/32: Add KASAN support
From: Christophe Leroy @ 2019-02-26 17:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Nicholas Piggin, Aneesh Kumar K.V, Andrey Ryabinin,
Alexander Potapenko, Dmitry Vyukov, Daniel Axtens
Cc: linux-mm, linuxppc-dev, linux-kernel, kasan-dev
In-Reply-To: <cover.1551161392.git.christophe.leroy@c-s.fr>
This patch adds KASAN support for PPC32. The following patch
will add an early activation of hash table for book3s. Until
then, a warning will be raised if trying to use KASAN on an
hash 6xx.
To support KASAN, this patch initialises that MMU mapings for
accessing to the KASAN shadow area defined in a previous patch.
An early mapping is set as soon as the kernel code has been
relocated at its definitive place.
Then the definitive mapping is set once paging is initialised.
For modules, the shadow area is allocated at module_alloc().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/Kconfig | 1 +
arch/powerpc/include/asm/kasan.h | 7 ++
arch/powerpc/kernel/head_32.S | 3 +
arch/powerpc/kernel/head_40x.S | 3 +
arch/powerpc/kernel/head_44x.S | 3 +
arch/powerpc/kernel/head_8xx.S | 3 +
arch/powerpc/kernel/head_fsl_booke.S | 3 +
arch/powerpc/kernel/setup-common.c | 3 +
arch/powerpc/mm/Makefile | 1 +
arch/powerpc/mm/kasan/Makefile | 5 ++
arch/powerpc/mm/kasan/kasan_init_32.c | 153 ++++++++++++++++++++++++++++++++++
11 files changed, 185 insertions(+)
create mode 100644 arch/powerpc/mm/kasan/Makefile
create mode 100644 arch/powerpc/mm/kasan/kasan_init_32.c
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 652c25260838..8d6108c83299 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -172,6 +172,7 @@ config PPC
select GENERIC_TIME_VSYSCALL
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_JUMP_LABEL
+ select HAVE_ARCH_KASAN if PPC32
select HAVE_ARCH_KGDB
select HAVE_ARCH_MMAP_RND_BITS
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
diff --git a/arch/powerpc/include/asm/kasan.h b/arch/powerpc/include/asm/kasan.h
index 8dc1e3819171..74a4ba9fb8a3 100644
--- a/arch/powerpc/include/asm/kasan.h
+++ b/arch/powerpc/include/asm/kasan.h
@@ -27,5 +27,12 @@
#define KASAN_SHADOW_SIZE (KASAN_SHADOW_END - KASAN_SHADOW_START)
+#ifdef CONFIG_KASAN
+void kasan_early_init(void);
+void kasan_init(void);
+#else
+static inline void kasan_init(void) { }
+#endif
+
#endif /* __ASSEMBLY */
#endif
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index ce6a972f2584..02229c005853 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -952,6 +952,9 @@ start_here:
* Do early platform-specific initialization,
* and set up the MMU.
*/
+#ifdef CONFIG_KASAN
+ bl kasan_early_init
+#endif
li r3,0
mr r4,r31
bl machine_init
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index a9c934f2319b..efa219d2136e 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -848,6 +848,9 @@ start_here:
/*
* Decide what sort of machine this is and initialize the MMU.
*/
+#ifdef CONFIG_KASAN
+ bl kasan_early_init
+#endif
li r3,0
mr r4,r31
bl machine_init
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 37117ab11584..34a5df827b38 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -203,6 +203,9 @@ _ENTRY(_start);
/*
* Decide what sort of machine this is and initialize the MMU.
*/
+#ifdef CONFIG_KASAN
+ bl kasan_early_init
+#endif
li r3,0
mr r4,r31
bl machine_init
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 03c73b4c6435..d25adb6ef235 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -853,6 +853,9 @@ start_here:
/*
* Decide what sort of machine this is and initialize the MMU.
*/
+#ifdef CONFIG_KASAN
+ bl kasan_early_init
+#endif
li r3,0
mr r4,r31
bl machine_init
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 1881127682e9..0fc38eb957b7 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -275,6 +275,9 @@ set_ivor:
/*
* Decide what sort of machine this is and initialize the MMU.
*/
+#ifdef CONFIG_KASAN
+ bl kasan_early_init
+#endif
mr r3,r30
mr r4,r31
bl machine_init
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index e7534f306c8e..3c6c5a43901e 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -67,6 +67,7 @@
#include <asm/livepatch.h>
#include <asm/mmu_context.h>
#include <asm/cpu_has_feature.h>
+#include <asm/kasan.h>
#include "setup.h"
@@ -865,6 +866,8 @@ static void smp_setup_pacas(void)
*/
void __init setup_arch(char **cmdline_p)
{
+ kasan_init();
+
*cmdline_p = boot_command_line;
/* Set a half-reasonable default so udelay does something sensible */
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 240d73dce6bb..80382a2d169b 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_PPC_COPRO_BASE) += copro_fault.o
obj-$(CONFIG_SPAPR_TCE_IOMMU) += mmu_context_iommu.o
obj-$(CONFIG_PPC_PTDUMP) += ptdump/
obj-$(CONFIG_PPC_MEM_KEYS) += pkeys.o
+obj-$(CONFIG_KASAN) += kasan/
# Disable kcov instrumentation on sensitive code
# This is necessary for booting with kcov enabled on book3e machines
diff --git a/arch/powerpc/mm/kasan/Makefile b/arch/powerpc/mm/kasan/Makefile
new file mode 100644
index 000000000000..6577897673dd
--- /dev/null
+++ b/arch/powerpc/mm/kasan/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+KASAN_SANITIZE := n
+
+obj-$(CONFIG_PPC32) += kasan_init_32.o
diff --git a/arch/powerpc/mm/kasan/kasan_init_32.c b/arch/powerpc/mm/kasan/kasan_init_32.c
new file mode 100644
index 000000000000..42f8534ce3ea
--- /dev/null
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define DISABLE_BRANCH_PROFILING
+
+#include <linux/kasan.h>
+#include <linux/printk.h>
+#include <linux/memblock.h>
+#include <linux/sched/task.h>
+#include <linux/vmalloc.h>
+#include <asm/pgalloc.h>
+#include <asm/code-patching.h>
+#include <mm/mmu_decl.h>
+
+static void kasan_populate_pte(pte_t *ptep, pgprot_t prot)
+{
+ phys_addr_t pa = __pa(kasan_early_shadow_page);
+ int i;
+
+ for (i = 0; i < PTRS_PER_PTE; i++, ptep++)
+ __set_pte_at(&init_mm, (unsigned long)kasan_early_shadow_page,
+ ptep, pfn_pte(PHYS_PFN(pa), prot), 0);
+}
+
+static int kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end)
+{
+ pmd_t *pmd;
+ unsigned long k_cur, k_next;
+
+ pmd = pmd_offset(pud_offset(pgd_offset_k(k_start), k_start), k_start);
+
+ for (k_cur = k_start; k_cur != k_end; k_cur = k_next, pmd++) {
+ pte_t *new;
+
+ k_next = pgd_addr_end(k_cur, k_end);
+ if ((void *)pmd_page_vaddr(*pmd) != kasan_early_shadow_pte)
+ continue;
+
+ new = pte_alloc_one_kernel(&init_mm);
+
+ if (!new)
+ return -ENOMEM;
+ kasan_populate_pte(new, PAGE_KERNEL_RO);
+ pmd_populate_kernel(&init_mm, pmd, new);
+ }
+ return 0;
+}
+
+static void __ref *kasan_get_one_page(void)
+{
+ if (slab_is_available())
+ return (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+
+ return memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+}
+
+static int __ref kasan_init_region(void *start, size_t size)
+{
+ unsigned long k_start = (unsigned long)kasan_mem_to_shadow(start);
+ unsigned long k_end = (unsigned long)kasan_mem_to_shadow(start + size);
+ unsigned long k_cur;
+ pmd_t *pmd;
+ void *block = NULL;
+ int ret = kasan_init_shadow_page_tables(k_start, k_end);
+
+ if (ret)
+ return ret;
+
+ if (!slab_is_available())
+ block = memblock_alloc(k_end - k_start, PAGE_SIZE);
+
+ for (k_cur = k_start; k_cur < k_end; k_cur += PAGE_SIZE) {
+ void *va = block ? block + k_cur - k_start :
+ kasan_get_one_page();
+ pte_t pte = pfn_pte(PHYS_PFN(__pa(va)), PAGE_KERNEL);
+
+ if (!va)
+ return -ENOMEM;
+
+ pmd = pmd_offset(pud_offset(pgd_offset_k(k_cur), k_cur), k_cur);
+ pte_update(pte_offset_kernel(pmd, k_cur), ~0, pte_val(pte));
+ }
+ flush_tlb_kernel_range(k_start, k_end);
+ return 0;
+}
+
+static void __init kasan_remap_early_shadow_ro(void)
+{
+ kasan_populate_pte(kasan_early_shadow_pte, PAGE_KERNEL_RO);
+ flush_tlb_mm(&init_mm);
+}
+
+void __init kasan_init(void)
+{
+ int ret;
+ struct memblock_region *reg;
+
+ for_each_memblock(memory, reg) {
+ phys_addr_t base = reg->base;
+ phys_addr_t top = min(base + reg->size, total_lowmem);
+
+ if (base >= top)
+ continue;
+
+ ret = kasan_init_region(__va(base), top - base);
+ if (ret)
+ panic("kasan: kasan_init_region() failed");
+ }
+
+ kasan_remap_early_shadow_ro();
+
+ clear_page(kasan_early_shadow_page);
+
+ /* At this point kasan is fully initialized. Enable error messages */
+ init_task.kasan_depth = 0;
+ pr_info("KASAN init done\n");
+}
+
+#ifdef CONFIG_MODULES
+void *module_alloc(unsigned long size)
+{
+ void *base = vmalloc_exec(size);
+
+ if (!base)
+ return NULL;
+
+ if (!kasan_init_region(base, size))
+ return base;
+
+ vfree(base);
+
+ return NULL;
+}
+#endif
+
+void __init kasan_early_init(void)
+{
+ unsigned long addr = KASAN_SHADOW_START;
+ unsigned long end = KASAN_SHADOW_END;
+ unsigned long next;
+ pmd_t *pmd = pmd_offset(pud_offset(pgd_offset_k(addr), addr), addr);
+
+ BUILD_BUG_ON(KASAN_SHADOW_START & ~PGDIR_MASK);
+
+ kasan_populate_pte(kasan_early_shadow_pte, PAGE_KERNEL);
+
+ do {
+ next = pgd_addr_end(addr, end);
+ pmd_populate_kernel(&init_mm, pmd, kasan_early_shadow_pte);
+ } while (pmd++, addr = next, addr != end);
+
+ if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE))
+ WARN(1, "KASAN not supported on hash 6xx");
+}
--
2.13.3
^ permalink raw reply related
* [PATCH v8 06/11] powerpc/32: make KVIRT_TOP dependent on FIXMAP_START
From: Christophe Leroy @ 2019-02-26 17:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Nicholas Piggin, Aneesh Kumar K.V, Andrey Ryabinin,
Alexander Potapenko, Dmitry Vyukov, Daniel Axtens
Cc: linux-mm, linuxppc-dev, linux-kernel, kasan-dev
In-Reply-To: <cover.1551161392.git.christophe.leroy@c-s.fr>
When we add KASAN shadow area, KVIRT_TOP can't be anymore fixed
at 0xfe000000.
This patch uses FIXADDR_START to define KVIRT_TOP.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/include/asm/book3s/32/pgtable.h | 13 ++++++++++---
arch/powerpc/include/asm/nohash/32/pgtable.h | 13 ++++++++++---
2 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
index aa8406b8f7ba..838de59f6754 100644
--- a/arch/powerpc/include/asm/book3s/32/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -134,15 +134,24 @@ static inline bool pte_user(pte_t pte)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
+
+#ifndef __ASSEMBLY__
+
+int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
+
+#endif /* !__ASSEMBLY__ */
+
/*
* This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
* value (for now) on others, from where we can start layout kernel
* virtual space that goes below PKMAP and FIXMAP
*/
+#include <asm/fixmap.h>
+
#ifdef CONFIG_HIGHMEM
#define KVIRT_TOP PKMAP_BASE
#else
-#define KVIRT_TOP (0xfe000000UL) /* for now, could be FIXMAP_BASE ? */
+#define KVIRT_TOP FIXADDR_START
#endif
/*
@@ -373,8 +382,6 @@ static inline void __ptep_set_access_flags(struct vm_area_struct *vma,
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 })
-int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
-
/* Generic accessors to PTE bits */
static inline int pte_write(pte_t pte) { return !!(pte_val(pte) & _PAGE_RW);}
static inline int pte_read(pte_t pte) { return 1; }
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index bed433358260..0284f8f5305f 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -64,15 +64,24 @@ extern int icache_44x_need_flush;
#define pgd_ERROR(e) \
pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+#ifndef __ASSEMBLY__
+
+int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
+
+#endif /* !__ASSEMBLY__ */
+
+
/*
* This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
* value (for now) on others, from where we can start layout kernel
* virtual space that goes below PKMAP and FIXMAP
*/
+#include <asm/fixmap.h>
+
#ifdef CONFIG_HIGHMEM
#define KVIRT_TOP PKMAP_BASE
#else
-#define KVIRT_TOP (0xfe000000UL) /* for now, could be FIXMAP_BASE ? */
+#define KVIRT_TOP FIXADDR_START
#endif
/*
@@ -379,8 +388,6 @@ static inline int pte_young(pte_t pte)
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 })
-int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
-
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_POWERPC_NOHASH_32_PGTABLE_H */
--
2.13.3
^ permalink raw reply related
* [PATCH v8 07/11] powerpc/32: prepare shadow area for KASAN
From: Christophe Leroy @ 2019-02-26 17:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Nicholas Piggin, Aneesh Kumar K.V, Andrey Ryabinin,
Alexander Potapenko, Dmitry Vyukov, Daniel Axtens
Cc: linux-mm, linuxppc-dev, linux-kernel, kasan-dev
In-Reply-To: <cover.1551161392.git.christophe.leroy@c-s.fr>
This patch prepares a shadow area for KASAN.
The shadow area will be at the top of the kernel virtual
memory space above the fixmap area and will occupy one
eighth of the total kernel virtual memory space.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/Kconfig.debug | 5 +++++
arch/powerpc/include/asm/fixmap.h | 5 +++++
arch/powerpc/include/asm/kasan.h | 16 ++++++++++++++++
arch/powerpc/mm/mem.c | 4 ++++
arch/powerpc/mm/ptdump/ptdump.c | 8 ++++++++
5 files changed, 38 insertions(+)
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 4e00cb0a5464..61febbbdd02b 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -366,3 +366,8 @@ config PPC_FAST_ENDIAN_SWITCH
depends on DEBUG_KERNEL && PPC_BOOK3S_64
help
If you're unsure what this is, say N.
+
+config KASAN_SHADOW_OFFSET
+ hex
+ depends on KASAN
+ default 0xe0000000
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index b9fbed84ddca..51a1a309c919 100644
--- a/arch/powerpc/include/asm/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -22,7 +22,12 @@
#include <asm/kmap_types.h>
#endif
+#ifdef CONFIG_KASAN
+#include <asm/kasan.h>
+#define FIXADDR_TOP KASAN_SHADOW_START
+#else
#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE))
+#endif
/*
* Here we define all the compile-time 'special' virtual
diff --git a/arch/powerpc/include/asm/kasan.h b/arch/powerpc/include/asm/kasan.h
index c3161b8fc017..8dc1e3819171 100644
--- a/arch/powerpc/include/asm/kasan.h
+++ b/arch/powerpc/include/asm/kasan.h
@@ -12,4 +12,20 @@
#define EXPORT_SYMBOL_KASAN(fn) EXPORT_SYMBOL(fn)
#endif
+#ifndef __ASSEMBLY__
+
+#include <asm/page.h>
+
+#define KASAN_SHADOW_SCALE_SHIFT 3
+
+#define KASAN_SHADOW_OFFSET ASM_CONST(CONFIG_KASAN_SHADOW_OFFSET)
+
+#define KASAN_SHADOW_START (KASAN_SHADOW_OFFSET + \
+ (PAGE_OFFSET >> KASAN_SHADOW_SCALE_SHIFT))
+
+#define KASAN_SHADOW_END 0UL
+
+#define KASAN_SHADOW_SIZE (KASAN_SHADOW_END - KASAN_SHADOW_START)
+
+#endif /* __ASSEMBLY */
#endif
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index f6787f90e158..4e7fa4eb2dd3 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -309,6 +309,10 @@ void __init mem_init(void)
mem_init_print_info(NULL);
#ifdef CONFIG_PPC32
pr_info("Kernel virtual memory layout:\n");
+#ifdef CONFIG_KASAN
+ pr_info(" * 0x%08lx..0x%08lx : kasan shadow mem\n",
+ KASAN_SHADOW_START, KASAN_SHADOW_END);
+#endif
pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP);
#ifdef CONFIG_HIGHMEM
pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n",
diff --git a/arch/powerpc/mm/ptdump/ptdump.c b/arch/powerpc/mm/ptdump/ptdump.c
index 37138428ab55..812ed680024f 100644
--- a/arch/powerpc/mm/ptdump/ptdump.c
+++ b/arch/powerpc/mm/ptdump/ptdump.c
@@ -101,6 +101,10 @@ static struct addr_marker address_markers[] = {
{ 0, "Fixmap start" },
{ 0, "Fixmap end" },
#endif
+#ifdef CONFIG_KASAN
+ { 0, "kasan shadow mem start" },
+ { 0, "kasan shadow mem end" },
+#endif
{ -1, NULL },
};
@@ -322,6 +326,10 @@ static void populate_markers(void)
#endif
address_markers[i++].start_address = FIXADDR_START;
address_markers[i++].start_address = FIXADDR_TOP;
+#ifdef CONFIG_KASAN
+ address_markers[i++].start_address = KASAN_SHADOW_START;
+ address_markers[i++].start_address = KASAN_SHADOW_END;
+#endif
#endif /* CONFIG_PPC64 */
}
--
2.13.3
^ permalink raw reply related
* [PATCH v8 03/11] powerpc/prom_init: don't use string functions from lib/
From: Christophe Leroy @ 2019-02-26 17:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Nicholas Piggin, Aneesh Kumar K.V, Andrey Ryabinin,
Alexander Potapenko, Dmitry Vyukov, Daniel Axtens
Cc: linux-mm, linuxppc-dev, linux-kernel, kasan-dev
In-Reply-To: <cover.1551161392.git.christophe.leroy@c-s.fr>
When KASAN is active, the string functions in lib/ are doing the
KASAN checks. This is too early for prom_init.
This patch implements dedicated string functions for prom_init,
which will be compiled in with KASAN disabled.
Size of prom_init before the patch:
text data bss dec hex filename
12060 488 6960 19508 4c34 arch/powerpc/kernel/prom_init.o
Size of prom_init after the patch:
text data bss dec hex filename
12460 488 6960 19908 4dc4 arch/powerpc/kernel/prom_init.o
This increases the size of prom_init a bit, but as prom_init is
in __init section, it is freed after boot anyway.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/prom_init.c | 213 ++++++++++++++++++++++++++-------
arch/powerpc/kernel/prom_init_check.sh | 2 +-
2 files changed, 173 insertions(+), 42 deletions(-)
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index f33ff4163a51..56d5639ab082 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -224,6 +224,137 @@ static bool __prombss rtas_has_query_cpu_stopped;
#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR)
#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR)
+/* Copied from lib/string.c and lib/kstrtox.c */
+
+static int __init prom_strcmp(const char *cs, const char *ct)
+{
+ unsigned char c1, c2;
+
+ while (1) {
+ c1 = *cs++;
+ c2 = *ct++;
+ if (c1 != c2)
+ return c1 < c2 ? -1 : 1;
+ if (!c1)
+ break;
+ }
+ return 0;
+}
+
+static char __init *prom_strcpy(char *dest, const char *src)
+{
+ char *tmp = dest;
+
+ while ((*dest++ = *src++) != '\0')
+ /* nothing */;
+ return tmp;
+}
+
+static int __init prom_strncmp(const char *cs, const char *ct, size_t count)
+{
+ unsigned char c1, c2;
+
+ while (count) {
+ c1 = *cs++;
+ c2 = *ct++;
+ if (c1 != c2)
+ return c1 < c2 ? -1 : 1;
+ if (!c1)
+ break;
+ count--;
+ }
+ return 0;
+}
+
+static size_t __init prom_strlen(const char *s)
+{
+ const char *sc;
+
+ for (sc = s; *sc != '\0'; ++sc)
+ /* nothing */;
+ return sc - s;
+}
+
+static int __init prom_memcmp(const void *cs, const void *ct, size_t count)
+{
+ const unsigned char *su1, *su2;
+ int res = 0;
+
+ for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
+ if ((res = *su1 - *su2) != 0)
+ break;
+ return res;
+}
+
+static char __init *prom_strstr(const char *s1, const char *s2)
+{
+ size_t l1, l2;
+
+ l2 = prom_strlen(s2);
+ if (!l2)
+ return (char *)s1;
+ l1 = prom_strlen(s1);
+ while (l1 >= l2) {
+ l1--;
+ if (!prom_memcmp(s1, s2, l2))
+ return (char *)s1;
+ s1++;
+ }
+ return NULL;
+}
+
+#ifdef CONFIG_CMDLINE
+static size_t __init prom_strlcpy(char *dest, const char *src, size_t size)
+{
+ size_t ret = prom_strlen(src);
+
+ if (size) {
+ size_t len = (ret >= size) ? size - 1 : ret;
+ memcpy(dest, src, len);
+ dest[len] = '\0';
+ }
+ return ret;
+}
+#endif
+
+#ifdef CONFIG_PPC_PSERIES
+static int __init prom_strtobool(const char *s, bool *res)
+{
+ if (!s)
+ return -EINVAL;
+
+ switch (s[0]) {
+ case 'y':
+ case 'Y':
+ case '1':
+ *res = true;
+ return 0;
+ case 'n':
+ case 'N':
+ case '0':
+ *res = false;
+ return 0;
+ case 'o':
+ case 'O':
+ switch (s[1]) {
+ case 'n':
+ case 'N':
+ *res = true;
+ return 0;
+ case 'f':
+ case 'F':
+ *res = false;
+ return 0;
+ default:
+ break;
+ }
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+#endif
/* This is the one and *ONLY* place where we actually call open
* firmware.
@@ -555,7 +686,7 @@ static int __init prom_setprop(phandle node, const char *nodename,
add_string(&p, tohex((u32)(unsigned long) value));
add_string(&p, tohex(valuelen));
add_string(&p, tohex(ADDR(pname)));
- add_string(&p, tohex(strlen(pname)));
+ add_string(&p, tohex(prom_strlen(pname)));
add_string(&p, "property");
*p = 0;
return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
@@ -639,25 +770,25 @@ static void __init early_cmdline_parse(void)
l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1);
#ifdef CONFIG_CMDLINE
if (l <= 0 || p[0] == '\0') /* dbl check */
- strlcpy(prom_cmd_line,
+ prom_strlcpy(prom_cmd_line,
CONFIG_CMDLINE, sizeof(prom_cmd_line));
#endif /* CONFIG_CMDLINE */
prom_printf("command line: %s\n", prom_cmd_line);
#ifdef CONFIG_PPC64
- opt = strstr(prom_cmd_line, "iommu=");
+ opt = prom_strstr(prom_cmd_line, "iommu=");
if (opt) {
prom_printf("iommu opt is: %s\n", opt);
opt += 6;
while (*opt && *opt == ' ')
opt++;
- if (!strncmp(opt, "off", 3))
+ if (!prom_strncmp(opt, "off", 3))
prom_iommu_off = 1;
- else if (!strncmp(opt, "force", 5))
+ else if (!prom_strncmp(opt, "force", 5))
prom_iommu_force_on = 1;
}
#endif
- opt = strstr(prom_cmd_line, "mem=");
+ opt = prom_strstr(prom_cmd_line, "mem=");
if (opt) {
opt += 4;
prom_memory_limit = prom_memparse(opt, (const char **)&opt);
@@ -669,13 +800,13 @@ static void __init early_cmdline_parse(void)
#ifdef CONFIG_PPC_PSERIES
prom_radix_disable = !IS_ENABLED(CONFIG_PPC_RADIX_MMU_DEFAULT);
- opt = strstr(prom_cmd_line, "disable_radix");
+ opt = prom_strstr(prom_cmd_line, "disable_radix");
if (opt) {
opt += 13;
if (*opt && *opt == '=') {
bool val;
- if (kstrtobool(++opt, &val))
+ if (prom_strtobool(++opt, &val))
prom_radix_disable = false;
else
prom_radix_disable = val;
@@ -1028,7 +1159,7 @@ static int __init prom_count_smt_threads(void)
type[0] = 0;
prom_getprop(node, "device_type", type, sizeof(type));
- if (strcmp(type, "cpu"))
+ if (prom_strcmp(type, "cpu"))
continue;
/*
* There is an entry for each smt thread, each entry being
@@ -1475,7 +1606,7 @@ static void __init prom_init_mem(void)
*/
prom_getprop(node, "name", type, sizeof(type));
}
- if (strcmp(type, "memory"))
+ if (prom_strcmp(type, "memory"))
continue;
plen = prom_getprop(node, "reg", regbuf, sizeof(regbuf));
@@ -1756,19 +1887,19 @@ static void __init prom_initialize_tce_table(void)
prom_getprop(node, "device_type", type, sizeof(type));
prom_getprop(node, "model", model, sizeof(model));
- if ((type[0] == 0) || (strstr(type, "pci") == NULL))
+ if ((type[0] == 0) || (prom_strstr(type, "pci") == NULL))
continue;
/* Keep the old logic intact to avoid regression. */
if (compatible[0] != 0) {
- if ((strstr(compatible, "python") == NULL) &&
- (strstr(compatible, "Speedwagon") == NULL) &&
- (strstr(compatible, "Winnipeg") == NULL))
+ if ((prom_strstr(compatible, "python") == NULL) &&
+ (prom_strstr(compatible, "Speedwagon") == NULL) &&
+ (prom_strstr(compatible, "Winnipeg") == NULL))
continue;
} else if (model[0] != 0) {
- if ((strstr(model, "ython") == NULL) &&
- (strstr(model, "peedwagon") == NULL) &&
- (strstr(model, "innipeg") == NULL))
+ if ((prom_strstr(model, "ython") == NULL) &&
+ (prom_strstr(model, "peedwagon") == NULL) &&
+ (prom_strstr(model, "innipeg") == NULL))
continue;
}
@@ -1917,12 +2048,12 @@ static void __init prom_hold_cpus(void)
type[0] = 0;
prom_getprop(node, "device_type", type, sizeof(type));
- if (strcmp(type, "cpu") != 0)
+ if (prom_strcmp(type, "cpu") != 0)
continue;
/* Skip non-configured cpus. */
if (prom_getprop(node, "status", type, sizeof(type)) > 0)
- if (strcmp(type, "okay") != 0)
+ if (prom_strcmp(type, "okay") != 0)
continue;
reg = cpu_to_be32(-1); /* make sparse happy */
@@ -1998,9 +2129,9 @@ static void __init prom_find_mmu(void)
return;
version[sizeof(version) - 1] = 0;
/* XXX might need to add other versions here */
- if (strcmp(version, "Open Firmware, 1.0.5") == 0)
+ if (prom_strcmp(version, "Open Firmware, 1.0.5") == 0)
of_workarounds = OF_WA_CLAIM;
- else if (strncmp(version, "FirmWorks,3.", 12) == 0) {
+ else if (prom_strncmp(version, "FirmWorks,3.", 12) == 0) {
of_workarounds = OF_WA_CLAIM | OF_WA_LONGTRAIL;
call_prom("interpret", 1, 1, "dev /memory 0 to allow-reclaim");
} else
@@ -2033,7 +2164,7 @@ static void __init prom_init_stdout(void)
call_prom("instance-to-path", 3, 1, prom.stdout, path, 255);
prom_printf("OF stdout device is: %s\n", of_stdout_device);
prom_setprop(prom.chosen, "/chosen", "linux,stdout-path",
- path, strlen(path) + 1);
+ path, prom_strlen(path) + 1);
/* instance-to-package fails on PA-Semi */
stdout_node = call_prom("instance-to-package", 1, 1, prom.stdout);
@@ -2043,7 +2174,7 @@ static void __init prom_init_stdout(void)
/* If it's a display, note it */
memset(type, 0, sizeof(type));
prom_getprop(stdout_node, "device_type", type, sizeof(type));
- if (strcmp(type, "display") == 0)
+ if (prom_strcmp(type, "display") == 0)
prom_setprop(stdout_node, path, "linux,boot-display", NULL, 0);
}
}
@@ -2064,19 +2195,19 @@ static int __init prom_find_machine_type(void)
compat[len] = 0;
while (i < len) {
char *p = &compat[i];
- int sl = strlen(p);
+ int sl = prom_strlen(p);
if (sl == 0)
break;
- if (strstr(p, "Power Macintosh") ||
- strstr(p, "MacRISC"))
+ if (prom_strstr(p, "Power Macintosh") ||
+ prom_strstr(p, "MacRISC"))
return PLATFORM_POWERMAC;
#ifdef CONFIG_PPC64
/* We must make sure we don't detect the IBM Cell
* blades as pSeries due to some firmware issues,
* so we do it here.
*/
- if (strstr(p, "IBM,CBEA") ||
- strstr(p, "IBM,CPBW-1.0"))
+ if (prom_strstr(p, "IBM,CBEA") ||
+ prom_strstr(p, "IBM,CPBW-1.0"))
return PLATFORM_GENERIC;
#endif /* CONFIG_PPC64 */
i += sl + 1;
@@ -2093,7 +2224,7 @@ static int __init prom_find_machine_type(void)
compat, sizeof(compat)-1);
if (len <= 0)
return PLATFORM_GENERIC;
- if (strcmp(compat, "chrp"))
+ if (prom_strcmp(compat, "chrp"))
return PLATFORM_GENERIC;
/* Default to pSeries. We need to know if we are running LPAR */
@@ -2155,7 +2286,7 @@ static void __init prom_check_displays(void)
for (node = 0; prom_next_node(&node); ) {
memset(type, 0, sizeof(type));
prom_getprop(node, "device_type", type, sizeof(type));
- if (strcmp(type, "display") != 0)
+ if (prom_strcmp(type, "display") != 0)
continue;
/* It seems OF doesn't null-terminate the path :-( */
@@ -2259,9 +2390,9 @@ static unsigned long __init dt_find_string(char *str)
s = os = (char *)dt_string_start;
s += 4;
while (s < (char *)dt_string_end) {
- if (strcmp(s, str) == 0)
+ if (prom_strcmp(s, str) == 0)
return s - os;
- s += strlen(s) + 1;
+ s += prom_strlen(s) + 1;
}
return 0;
}
@@ -2294,7 +2425,7 @@ static void __init scan_dt_build_strings(phandle node,
}
/* skip "name" */
- if (strcmp(namep, "name") == 0) {
+ if (prom_strcmp(namep, "name") == 0) {
*mem_start = (unsigned long)namep;
prev_name = "name";
continue;
@@ -2306,7 +2437,7 @@ static void __init scan_dt_build_strings(phandle node,
namep = sstart + soff;
} else {
/* Trim off some if we can */
- *mem_start = (unsigned long)namep + strlen(namep) + 1;
+ *mem_start = (unsigned long)namep + prom_strlen(namep) + 1;
dt_string_end = *mem_start;
}
prev_name = namep;
@@ -2375,7 +2506,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
break;
/* skip "name" */
- if (strcmp(pname, "name") == 0) {
+ if (prom_strcmp(pname, "name") == 0) {
prev_name = "name";
continue;
}
@@ -2406,7 +2537,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
call_prom("getprop", 4, 1, node, pname, valp, l);
*mem_start = _ALIGN(*mem_start, 4);
- if (!strcmp(pname, "phandle"))
+ if (!prom_strcmp(pname, "phandle"))
has_phandle = 1;
}
@@ -2476,8 +2607,8 @@ static void __init flatten_device_tree(void)
/* Add "phandle" in there, we'll need it */
namep = make_room(&mem_start, &mem_end, 16, 1);
- strcpy(namep, "phandle");
- mem_start = (unsigned long)namep + strlen(namep) + 1;
+ prom_strcpy(namep, "phandle");
+ mem_start = (unsigned long)namep + prom_strlen(namep) + 1;
/* Build string array */
prom_printf("Building dt strings...\n");
@@ -2799,7 +2930,7 @@ static void __init fixup_device_tree_efika(void)
rv = prom_getprop(node, "model", prop, sizeof(prop));
if (rv == PROM_ERROR)
return;
- if (strcmp(prop, "EFIKA5K2"))
+ if (prom_strcmp(prop, "EFIKA5K2"))
return;
prom_printf("Applying EFIKA device tree fixups\n");
@@ -2807,13 +2938,13 @@ static void __init fixup_device_tree_efika(void)
/* Claiming to be 'chrp' is death */
node = call_prom("finddevice", 1, 1, ADDR("/"));
rv = prom_getprop(node, "device_type", prop, sizeof(prop));
- if (rv != PROM_ERROR && (strcmp(prop, "chrp") == 0))
+ if (rv != PROM_ERROR && (prom_strcmp(prop, "chrp") == 0))
prom_setprop(node, "/", "device_type", "efika", sizeof("efika"));
/* CODEGEN,description is exposed in /proc/cpuinfo so
fix that too */
rv = prom_getprop(node, "CODEGEN,description", prop, sizeof(prop));
- if (rv != PROM_ERROR && (strstr(prop, "CHRP")))
+ if (rv != PROM_ERROR && (prom_strstr(prop, "CHRP")))
prom_setprop(node, "/", "CODEGEN,description",
"Efika 5200B PowerPC System",
sizeof("Efika 5200B PowerPC System"));
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 181fd10008ef..4cac45cb5de5 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -27,7 +27,7 @@ fi
WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush
_end enter_prom $MEM_FUNCS reloc_offset __secondary_hold
__secondary_hold_acknowledge __secondary_hold_spinloop __start
-strcmp strcpy strlcpy strlen strncmp strstr kstrtobool logo_linux_clut224
+logo_linux_clut224
reloc_got2 kernstart_addr memstart_addr linux_banner _stext
__prom_init_toc_start __prom_init_toc_end btext_setup_display TOC."
--
2.13.3
^ permalink raw reply related
* [PATCH v8 01/11] powerpc/32: Move early_init() in a separate file
From: Christophe Leroy @ 2019-02-26 17:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Nicholas Piggin, Aneesh Kumar K.V, Andrey Ryabinin,
Alexander Potapenko, Dmitry Vyukov, Daniel Axtens
Cc: linux-mm, linuxppc-dev, linux-kernel, kasan-dev
In-Reply-To: <cover.1551161392.git.christophe.leroy@c-s.fr>
In preparation of KASAN, move early_init() into a separate
file in order to allow deactivation of KASAN for that function.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/Makefile | 2 +-
arch/powerpc/kernel/early_32.c | 36 ++++++++++++++++++++++++++++++++++++
arch/powerpc/kernel/setup_32.c | 28 ----------------------------
3 files changed, 37 insertions(+), 29 deletions(-)
create mode 100644 arch/powerpc/kernel/early_32.c
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index cddadccf551d..45e47752b692 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -93,7 +93,7 @@ extra-y += vmlinux.lds
obj-$(CONFIG_RELOCATABLE) += reloc_$(BITS).o
-obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
+obj-$(CONFIG_PPC32) += entry_32.o setup_32.o early_32.o
obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
diff --git a/arch/powerpc/kernel/early_32.c b/arch/powerpc/kernel/early_32.c
new file mode 100644
index 000000000000..cf3cdd81dc47
--- /dev/null
+++ b/arch/powerpc/kernel/early_32.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Early init before relocation
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/asm-prototypes.h>
+
+/*
+ * We're called here very early in the boot.
+ *
+ * Note that the kernel may be running at an address which is different
+ * from the address that it was linked at, so we must use RELOC/PTRRELOC
+ * to access static data (including strings). -- paulus
+ */
+notrace unsigned long __init early_init(unsigned long dt_ptr)
+{
+ unsigned long offset = reloc_offset();
+
+ /* First zero the BSS -- use memset_io, some platforms don't have caches on yet */
+ memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start);
+
+ /*
+ * Identify the CPU type and fix up code sections
+ * that depend on which cpu we have.
+ */
+ identify_cpu(offset, mfspr(SPRN_PVR));
+
+ apply_feature_fixups();
+
+ return KERNELBASE + offset;
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1f0b7629c1a6..3f0d51b4b2f5 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -63,34 +63,6 @@ EXPORT_SYMBOL(DMA_MODE_READ);
EXPORT_SYMBOL(DMA_MODE_WRITE);
/*
- * We're called here very early in the boot.
- *
- * Note that the kernel may be running at an address which is different
- * from the address that it was linked at, so we must use RELOC/PTRRELOC
- * to access static data (including strings). -- paulus
- */
-notrace unsigned long __init early_init(unsigned long dt_ptr)
-{
- unsigned long offset = reloc_offset();
-
- /* First zero the BSS -- use memset_io, some platforms don't have
- * caches on yet */
- memset_io((void __iomem *)PTRRELOC(&__bss_start), 0,
- __bss_stop - __bss_start);
-
- /*
- * Identify the CPU type and fix up code sections
- * that depend on which cpu we have.
- */
- identify_cpu(offset, mfspr(SPRN_PVR));
-
- apply_feature_fixups();
-
- return KERNELBASE + offset;
-}
-
-
-/*
* This is run before start_kernel(), the kernel has been relocated
* and we are running with enough of the MMU enabled to have our
* proper kernel virtual addresses
--
2.13.3
^ permalink raw reply related
* [PATCH v8 02/11] powerpc: prepare string/mem functions for KASAN
From: Christophe Leroy @ 2019-02-26 17:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Nicholas Piggin, Aneesh Kumar K.V, Andrey Ryabinin,
Alexander Potapenko, Dmitry Vyukov, Daniel Axtens
Cc: linux-mm, linuxppc-dev, linux-kernel, kasan-dev
In-Reply-To: <cover.1551161392.git.christophe.leroy@c-s.fr>
CONFIG_KASAN implements wrappers for memcpy() memmove() and memset()
Those wrappers are doing the verification then call respectively
__memcpy() __memmove() and __memset(). The arches are therefore
expected to rename their optimised functions that way.
For files on which KASAN is inhibited, #defines are used to allow
them to directly call optimised versions of the functions without
going through the KASAN wrappers.
See commit 393f203f5fd5 ("x86_64: kasan: add interceptors for
memset/memmove/memcpy functions") for details.
Other string / mem functions do not (yet) have kasan wrappers,
we therefore have to fallback to the generic versions when
KASAN is active, otherwise KASAN checks will be skipped.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/include/asm/kasan.h | 15 +++++++++++++++
arch/powerpc/include/asm/string.h | 32 +++++++++++++++++++++++++++++---
arch/powerpc/kernel/prom_init_check.sh | 10 +++++++++-
arch/powerpc/lib/Makefile | 11 ++++++++---
arch/powerpc/lib/copy_32.S | 15 +++++++++------
arch/powerpc/lib/mem_64.S | 11 +++++++----
arch/powerpc/lib/memcpy_64.S | 5 +++--
7 files changed, 80 insertions(+), 19 deletions(-)
create mode 100644 arch/powerpc/include/asm/kasan.h
diff --git a/arch/powerpc/include/asm/kasan.h b/arch/powerpc/include/asm/kasan.h
new file mode 100644
index 000000000000..c3161b8fc017
--- /dev/null
+++ b/arch/powerpc/include/asm/kasan.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_KASAN_H
+#define __ASM_KASAN_H
+
+#ifdef CONFIG_KASAN
+#define _GLOBAL_KASAN(fn) .weak fn ; _GLOBAL(__##fn) ; _GLOBAL(fn)
+#define _GLOBAL_TOC_KASAN(fn) .weak fn ; _GLOBAL_TOC(__##fn) ; _GLOBAL_TOC(fn)
+#define EXPORT_SYMBOL_KASAN(fn) EXPORT_SYMBOL(__##fn) ; EXPORT_SYMBOL(fn)
+#else
+#define _GLOBAL_KASAN(fn) _GLOBAL(fn)
+#define _GLOBAL_TOC_KASAN(fn) _GLOBAL_TOC(fn)
+#define EXPORT_SYMBOL_KASAN(fn) EXPORT_SYMBOL(fn)
+#endif
+
+#endif
diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h
index 1647de15a31e..9bf6dffb4090 100644
--- a/arch/powerpc/include/asm/string.h
+++ b/arch/powerpc/include/asm/string.h
@@ -4,14 +4,17 @@
#ifdef __KERNEL__
+#ifndef CONFIG_KASAN
#define __HAVE_ARCH_STRNCPY
#define __HAVE_ARCH_STRNCMP
+#define __HAVE_ARCH_MEMCHR
+#define __HAVE_ARCH_MEMCMP
+#define __HAVE_ARCH_MEMSET16
+#endif
+
#define __HAVE_ARCH_MEMSET
#define __HAVE_ARCH_MEMCPY
#define __HAVE_ARCH_MEMMOVE
-#define __HAVE_ARCH_MEMCMP
-#define __HAVE_ARCH_MEMCHR
-#define __HAVE_ARCH_MEMSET16
#define __HAVE_ARCH_MEMCPY_FLUSHCACHE
extern char * strcpy(char *,const char *);
@@ -27,7 +30,27 @@ extern int memcmp(const void *,const void *,__kernel_size_t);
extern void * memchr(const void *,int,__kernel_size_t);
extern void * memcpy_flushcache(void *,const void *,__kernel_size_t);
+void *__memset(void *s, int c, __kernel_size_t count);
+void *__memcpy(void *to, const void *from, __kernel_size_t n);
+void *__memmove(void *to, const void *from, __kernel_size_t n);
+
+#if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__)
+/*
+ * For files that are not instrumented (e.g. mm/slub.c) we
+ * should use not instrumented version of mem* functions.
+ */
+#define memcpy(dst, src, len) __memcpy(dst, src, len)
+#define memmove(dst, src, len) __memmove(dst, src, len)
+#define memset(s, c, n) __memset(s, c, n)
+
+#ifndef __NO_FORTIFY
+#define __NO_FORTIFY /* FORTIFY_SOURCE uses __builtin_memcpy, etc. */
+#endif
+
+#endif
+
#ifdef CONFIG_PPC64
+#ifndef CONFIG_KASAN
#define __HAVE_ARCH_MEMSET32
#define __HAVE_ARCH_MEMSET64
@@ -49,8 +72,11 @@ static inline void *memset64(uint64_t *p, uint64_t v, __kernel_size_t n)
{
return __memset64(p, v, n * 8);
}
+#endif
#else
+#ifndef CONFIG_KASAN
#define __HAVE_ARCH_STRLEN
+#endif
extern void *memset16(uint16_t *, uint16_t, __kernel_size_t);
#endif
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 667df97d2595..181fd10008ef 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -16,8 +16,16 @@
# If you really need to reference something from prom_init.o add
# it to the list below:
+grep "^CONFIG_KASAN=y$" .config >/dev/null
+if [ $? -eq 0 ]
+then
+ MEM_FUNCS="__memcpy __memset"
+else
+ MEM_FUNCS="memcpy memset"
+fi
+
WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush
-_end enter_prom memcpy memset reloc_offset __secondary_hold
+_end enter_prom $MEM_FUNCS reloc_offset __secondary_hold
__secondary_hold_acknowledge __secondary_hold_spinloop __start
strcmp strcpy strlcpy strlen strncmp strstr kstrtobool logo_linux_clut224
reloc_got2 kernstart_addr memstart_addr linux_banner _stext
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 79396e184bca..47a4de434c22 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -8,9 +8,14 @@ ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC)
CFLAGS_REMOVE_code-patching.o = $(CC_FLAGS_FTRACE)
CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE)
-obj-y += string.o alloc.o code-patching.o feature-fixups.o
+obj-y += alloc.o code-patching.o feature-fixups.o
-obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o strlen_32.o
+ifndef CONFIG_KASAN
+obj-y += string.o memcmp_$(BITS).o
+obj-$(CONFIG_PPC32) += strlen_32.o
+endif
+
+obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o
obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
@@ -34,7 +39,7 @@ obj64-$(CONFIG_KPROBES_SANITY_TEST) += test_emulate_step.o \
test_emulate_step_exec_instr.o
obj-y += checksum_$(BITS).o checksum_wrappers.o \
- string_$(BITS).o memcmp_$(BITS).o
+ string_$(BITS).o
obj-y += sstep.o ldstfp.o quad.o
obj64-y += quad.o
diff --git a/arch/powerpc/lib/copy_32.S b/arch/powerpc/lib/copy_32.S
index ba66846fe973..fc4fa7246200 100644
--- a/arch/powerpc/lib/copy_32.S
+++ b/arch/powerpc/lib/copy_32.S
@@ -14,6 +14,7 @@
#include <asm/ppc_asm.h>
#include <asm/export.h>
#include <asm/code-patching-asm.h>
+#include <asm/kasan.h>
#define COPY_16_BYTES \
lwz r7,4(r4); \
@@ -68,6 +69,7 @@ CACHELINE_BYTES = L1_CACHE_BYTES
LG_CACHELINE_BYTES = L1_CACHE_SHIFT
CACHELINE_MASK = (L1_CACHE_BYTES-1)
+#ifndef CONFIG_KASAN
_GLOBAL(memset16)
rlwinm. r0 ,r5, 31, 1, 31
addi r6, r3, -4
@@ -81,6 +83,7 @@ _GLOBAL(memset16)
sth r4, 4(r6)
blr
EXPORT_SYMBOL(memset16)
+#endif
/*
* Use dcbz on the complete cache lines in the destination
@@ -91,7 +94,7 @@ EXPORT_SYMBOL(memset16)
* We therefore skip the optimised bloc that uses dcbz. This jump is
* replaced by a nop once cache is active. This is done in machine_init()
*/
-_GLOBAL(memset)
+_GLOBAL_KASAN(memset)
cmplwi 0,r5,4
blt 7f
@@ -150,7 +153,7 @@ _GLOBAL(memset)
9: stbu r4,1(r6)
bdnz 9b
blr
-EXPORT_SYMBOL(memset)
+EXPORT_SYMBOL_KASAN(memset)
/*
* This version uses dcbz on the complete cache lines in the
@@ -163,12 +166,12 @@ EXPORT_SYMBOL(memset)
* We therefore jump to generic_memcpy which doesn't use dcbz. This jump is
* replaced by a nop once cache is active. This is done in machine_init()
*/
-_GLOBAL(memmove)
+_GLOBAL_KASAN(memmove)
cmplw 0,r3,r4
bgt backwards_memcpy
/* fall through */
-_GLOBAL(memcpy)
+_GLOBAL_KASAN(memcpy)
1: b generic_memcpy
patch_site 1b, patch__memcpy_nocache
@@ -242,8 +245,8 @@ _GLOBAL(memcpy)
stbu r0,1(r6)
bdnz 40b
65: blr
-EXPORT_SYMBOL(memcpy)
-EXPORT_SYMBOL(memmove)
+EXPORT_SYMBOL_KASAN(memcpy)
+EXPORT_SYMBOL_KASAN(memmove)
generic_memcpy:
srwi. r7,r5,3
diff --git a/arch/powerpc/lib/mem_64.S b/arch/powerpc/lib/mem_64.S
index 3c3be02f33b7..7cd6cf6822a2 100644
--- a/arch/powerpc/lib/mem_64.S
+++ b/arch/powerpc/lib/mem_64.S
@@ -12,7 +12,9 @@
#include <asm/errno.h>
#include <asm/ppc_asm.h>
#include <asm/export.h>
+#include <asm/kasan.h>
+#ifndef CONFIG_KASAN
_GLOBAL(__memset16)
rlwimi r4,r4,16,0,15
/* fall through */
@@ -29,8 +31,9 @@ _GLOBAL(__memset64)
EXPORT_SYMBOL(__memset16)
EXPORT_SYMBOL(__memset32)
EXPORT_SYMBOL(__memset64)
+#endif
-_GLOBAL(memset)
+_GLOBAL_KASAN(memset)
neg r0,r3
rlwimi r4,r4,8,16,23
andi. r0,r0,7 /* # bytes to be 8-byte aligned */
@@ -95,9 +98,9 @@ _GLOBAL(memset)
10: bflr 31
stb r4,0(r6)
blr
-EXPORT_SYMBOL(memset)
+EXPORT_SYMBOL_KASAN(memset)
-_GLOBAL_TOC(memmove)
+_GLOBAL_TOC_KASAN(memmove)
cmplw 0,r3,r4
bgt backwards_memcpy
b memcpy
@@ -138,4 +141,4 @@ _GLOBAL(backwards_memcpy)
beq 2b
mtctr r7
b 1b
-EXPORT_SYMBOL(memmove)
+EXPORT_SYMBOL_KASAN(memmove)
diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S
index 273ea67e60a1..862b515b8868 100644
--- a/arch/powerpc/lib/memcpy_64.S
+++ b/arch/powerpc/lib/memcpy_64.S
@@ -11,6 +11,7 @@
#include <asm/export.h>
#include <asm/asm-compat.h>
#include <asm/feature-fixups.h>
+#include <asm/kasan.h>
#ifndef SELFTEST_CASE
/* For big-endian, 0 == most CPUs, 1 == POWER6, 2 == Cell */
@@ -18,7 +19,7 @@
#endif
.align 7
-_GLOBAL_TOC(memcpy)
+_GLOBAL_TOC_KASAN(memcpy)
BEGIN_FTR_SECTION
#ifdef __LITTLE_ENDIAN__
cmpdi cr7,r5,0
@@ -229,4 +230,4 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
4: ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1) /* return dest pointer */
blr
#endif
-EXPORT_SYMBOL(memcpy)
+EXPORT_SYMBOL_KASAN(memcpy)
--
2.13.3
^ permalink raw reply related
* [PATCH v8 00/11] KASAN for powerpc/32
From: Christophe Leroy @ 2019-02-26 17:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Nicholas Piggin, Aneesh Kumar K.V, Andrey Ryabinin,
Alexander Potapenko, Dmitry Vyukov, Daniel Axtens
Cc: linux-mm, linuxppc-dev, linux-kernel, kasan-dev
This series adds KASAN support to powerpc/32
Tested on nohash/32 (8xx) and book3s/32 (mpc832x ie 603).
Boot tested on qemu mac99
Changes in v8:
- Fixed circular issue between pgtable.h and fixmap.h
- Added missing includes in ppc64 string files
- Fixed kasan string related macro names for ppc64.
- Fixed most checkpatch messages
- build tested on kisskb (http://kisskb.ellerman.id.au/kisskb/head/6e65827de2fe71d21682dafd9084ed2cc6e06d4f/)
Changes in v7:
- split in several smaller patches
- prom_init now has its own string functions
- full deactivation of powerpc-optimised string functions when KASAN is active
- shadow area now at a fixed place on very top of kernel virtual space.
- Early static hash table for hash book3s/32.
- Full support of both inline and outline instrumentation for both hash and nohash ppc32
- Earlier full activation of kasan.
Changes in v6:
- Fixed oops on module loading (due to access to RO shadow zero area).
- Added support for hash book3s/32, thanks to Daniel's patch to differ KASAN activation.
- Reworked handling of optimised string functions (dedicated patch for it)
- Reordered some files to ease adding of book3e/64 support.
Changes in v5:
- Added KASAN_SHADOW_OFFSET in Makefile, otherwise we fallback to KASAN_MINIMAL
and some stuff like stack instrumentation is not performed
- Moved calls to kasan_early_init() in head.S because stack instrumentation
in machine_init was performed before the call to kasan_early_init()
- Mapping kasan_early_shadow_page RW in kasan_early_init() and
remaping RO later in kasan_init()
- Allocating a big memblock() for shadow area, falling back to PAGE_SIZE blocks in case of failure.
Changes in v4:
- Comments from Andrey (DISABLE_BRANCH_PROFILING, Activation of reports)
- Proper initialisation of shadow area in kasan_init()
- Panic in case Hash table is required.
- Added comments in patch one to explain why *t = *s becomes memcpy(t, s, ...)
- Call of kasan_init_tags()
Changes in v3:
- Removed the printk() in kasan_early_init() to avoid build failure (see https://github.com/linuxppc/issues/issues/218)
- Added necessary changes in asm/book3s/32/pgtable.h to get it work on powerpc 603 family
- Added a few KASAN_SANITIZE_xxx.o := n to successfully boot on powerpc 603 family
Changes in v2:
- Rebased.
- Using __set_pte_at() to build the early table.
- Worked around and got rid of the patch adding asm/page.h in asm/pgtable-types.h
==> might be fixed independently but not needed for this serie.
Christophe Leroy (11):
powerpc/32: Move early_init() in a separate file
powerpc: prepare string/mem functions for KASAN
powerpc/prom_init: don't use string functions from lib/
powerpc/mm: don't use direct assignation during early boot.
powerpc/32: use memset() instead of memset_io() to zero BSS
powerpc/32: make KVIRT_TOP dependent on FIXMAP_START
powerpc/32: prepare shadow area for KASAN
powerpc: disable KASAN instrumentation on early/critical files.
powerpc/32: Add KASAN support
powerpc/32s: move hash code patching out of MMU_init_hw()
powerpc/32s: set up an early static hash table for KASAN.
arch/powerpc/Kconfig | 1 +
arch/powerpc/Kconfig.debug | 5 +
arch/powerpc/include/asm/book3s/32/pgtable.h | 13 +-
arch/powerpc/include/asm/fixmap.h | 5 +
arch/powerpc/include/asm/kasan.h | 38 +++++
arch/powerpc/include/asm/nohash/32/pgtable.h | 13 +-
arch/powerpc/include/asm/string.h | 32 +++-
arch/powerpc/kernel/Makefile | 14 +-
arch/powerpc/kernel/cputable.c | 13 +-
arch/powerpc/kernel/early_32.c | 36 +++++
arch/powerpc/kernel/head_32.S | 46 ++++--
arch/powerpc/kernel/head_40x.S | 3 +
arch/powerpc/kernel/head_44x.S | 3 +
arch/powerpc/kernel/head_8xx.S | 3 +
arch/powerpc/kernel/head_fsl_booke.S | 3 +
arch/powerpc/kernel/prom_init.c | 213 +++++++++++++++++++++------
arch/powerpc/kernel/prom_init_check.sh | 12 +-
arch/powerpc/kernel/setup-common.c | 3 +
arch/powerpc/kernel/setup_32.c | 28 ----
arch/powerpc/lib/Makefile | 19 ++-
arch/powerpc/lib/copy_32.S | 15 +-
arch/powerpc/lib/mem_64.S | 11 +-
arch/powerpc/lib/memcpy_64.S | 5 +-
arch/powerpc/mm/Makefile | 7 +
arch/powerpc/mm/kasan/Makefile | 5 +
arch/powerpc/mm/kasan/kasan_init_32.c | 177 ++++++++++++++++++++++
arch/powerpc/mm/mem.c | 4 +
arch/powerpc/mm/mmu_decl.h | 2 +
arch/powerpc/mm/ppc_mmu_32.c | 36 +++--
arch/powerpc/mm/ptdump/ptdump.c | 8 +
arch/powerpc/platforms/powermac/Makefile | 6 +
arch/powerpc/purgatory/Makefile | 3 +
arch/powerpc/xmon/Makefile | 1 +
33 files changed, 660 insertions(+), 123 deletions(-)
create mode 100644 arch/powerpc/include/asm/kasan.h
create mode 100644 arch/powerpc/kernel/early_32.c
create mode 100644 arch/powerpc/mm/kasan/Makefile
create mode 100644 arch/powerpc/mm/kasan/kasan_init_32.c
--
2.13.3
^ permalink raw reply
* [PATCH v8 04/11] powerpc/mm: don't use direct assignation during early boot.
From: Christophe Leroy @ 2019-02-26 17:22 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
Nicholas Piggin, Aneesh Kumar K.V, Andrey Ryabinin,
Alexander Potapenko, Dmitry Vyukov, Daniel Axtens
Cc: linux-mm, linuxppc-dev, linux-kernel, kasan-dev
In-Reply-To: <cover.1551161392.git.christophe.leroy@c-s.fr>
In kernel/cputable.c, explicitly use memcpy() instead of *y = *x;
This will allow GCC to replace it with __memcpy() when KASAN is
selected.
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/cputable.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 1eab54bc6ee9..cd12f362b61f 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2147,7 +2147,11 @@ void __init set_cur_cpu_spec(struct cpu_spec *s)
struct cpu_spec *t = &the_cpu_spec;
t = PTRRELOC(t);
- *t = *s;
+ /*
+ * use memcpy() instead of *t = *s so that GCC replaces it
+ * by __memcpy() when KASAN is active
+ */
+ memcpy(t, s, sizeof(*t));
*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
}
@@ -2161,8 +2165,11 @@ static struct cpu_spec * __init setup_cpu_spec(unsigned long offset,
t = PTRRELOC(t);
old = *t;
- /* Copy everything, then do fixups */
- *t = *s;
+ /*
+ * Copy everything, then do fixups. Use memcpy() instead of *t = *s
+ * so that GCC replaces it by __memcpy() when KASAN is active
+ */
+ memcpy(t, s, sizeof(*t));
/*
* If we are overriding a previous value derived from the real
--
2.13.3
^ permalink raw reply related
* Re: [PATCH 0/2] x86, numa: always initialize all possible nodes
From: Michal Hocko @ 2019-02-26 13:12 UTC (permalink / raw)
To: linux-mm
Cc: Tony Luck, linux-ia64, Peter Zijlstra, x86, LKML, Pingfan Liu,
Dave Hansen, Ingo Molnar, linuxppc-dev
In-Reply-To: <20190212095343.23315-1-mhocko@kernel.org>
On Tue 12-02-19 10:53:41, Michal Hocko wrote:
> Hi,
> this has been posted as an RFC previously [1]. There didn't seem to be
> any objections so I am reposting this for inclusion. I have added a
> debugging patch which prints the zonelist setup for each numa node
> for an easier debugging of a broken zonelist setup.
>
> [1] http://lkml.kernel.org/r/20190114082416.30939-1-mhocko@kernel.org
Friendly ping. I haven't heard any complains so can we route this via
tip/x86/mm or should we go via mmotm.
--
Michal Hocko
SUSE Labs
^ permalink raw reply
* Re: [PATCH V3 1/10] X86/Hyper-V: Add parameter offset for hyperv_fill_flush_guest_mapping_list()
From: Tianyu Lan @ 2019-02-26 13:00 UTC (permalink / raw)
To: Stephen Hemminger
Cc: kvm@vger.kernel.org, rkrcmar@redhat.com, catalin.marinas@arm.com,
will.deacon@arm.com, linux-kernel@vger.kernel.org, hpa@zytor.com,
KY Srinivasan, kvmarm@lists.cs.columbia.edu, sashal@kernel.org,
x86@kernel.org, linux@armlinux.org.uk, mingo@redhat.com,
jhogan@kernel.org, linux-mips@vger.kernel.org, Tianyu Lan,
marc.zyngier@arm.com, Haiyang Zhang, kvm-ppc@vger.kernel.org,
bp@alien8.de, devel@linuxdriverproject.org, tglx@linutronix.de,
Michael Kelley, linux-arm-kernel@lists.infradead.org,
christoffer.dall@arm.com, ralf@linux-mips.org,
paul.burton@mips.com, pbonzini@redhat.com, vkuznets,
linuxppc-dev@lists.ozlabs.org
In-Reply-To: <SN6PR2101MB0912C24CD03D22248C868196CC7F0@SN6PR2101MB0912.namprd21.prod.outlook.com>
Hi Stephen:
Thanks for your review.
On Sat, Feb 23, 2019 at 1:08 AM Stephen Hemminger
<sthemmin@microsoft.com> wrote:
>
> int hyperv_fill_flush_guest_mapping_list(
> struct hv_guest_mapping_flush_list *flush,
> - u64 start_gfn, u64 pages)
> + int offset, u64 start_gfn, u64 pages)
> {
> u64 cur = start_gfn;
> u64 additional_pages;
> - int gpa_n = 0;
> + int gpa_n = offset;
>
> do {
> /*
>
> Do you mean to support negative offsets here? Maybe unsigned would be better?
Yes, this makes sense. Will update. Thanks.
--
Best regards
Tianyu Lan
^ permalink raw reply
* Re: [PATCH v2 11/16] KVM: introduce a 'mmap' method for KVM devices
From: Paolo Bonzini @ 2019-02-26 12:52 UTC (permalink / raw)
To: Cédric Le Goater, David Gibson
Cc: kvm, kvm-ppc, Paul Mackerras, linuxppc-dev
In-Reply-To: <c906cf13-fb2a-3a76-4382-2a7f98496c05@kaod.org>
On 25/02/19 11:57, Cédric Le Goater wrote:
> Hello Paolo,
>
> On 2/25/19 4:33 AM, David Gibson wrote:
>> On Fri, Feb 22, 2019 at 12:28:35PM +0100, Cédric Le Goater wrote:
>>> Some KVM devices will want to handle special mappings related to the
>>> underlying HW. For instance, the XIVE interrupt controller of the
>>> POWER9 processor has MMIO pages for thread interrupt management and
>>> for interrupt source control that need to be exposed to the guest when
>>> the OS has the required support.
>>>
>>> Signed-off-by: Cédric Le Goater <clg@kaod.org>
>>
>> Ah, when I suggested mmap() on the base device fd, I hadn't realized
>> there wasn't a facility for that yet.
>>
>> Have you discussed this with Paolo?
>
> Not yet.
>
>> We'll need some core KVM buy in to merge this.
>
> Here is an extension of the KVM device to allow special mappings.
> Something we would need for the support of the POWER9 XIVE interrupt
> controller.
>
> There are two MMIOs we need to expose to the guest :
>
> 1. HW MMIO controlling of the interrupt presenter registers (TIMA)
> 2. HW MMIO of the interrupt sources for interrupt management (ESB)
>
> The TIMA could have been exposed with a page offset in the vCPU mapping
> but as it only makes sense when the XIVE interrupt mode is active, we
> chose to use directly the KVM device fd for that. Is that ok ?
>
> An alternate solution is to use a device ioctl to allocate an anon fd
> and do the mapping, but that seems like extra fuss for the same result.
It's okay, it's a natural extension to dev_ops - but thanks for asking
anyway. :)
Paolo
^ permalink raw reply
* Re: Re: Kernel panic when loading the IDE controller driver
From: Bartlomiej Zolnierkiewicz @ 2019-02-26 11:51 UTC (permalink / raw)
To: Christophe Leroy, sgosavi1
Cc: linuxppc-dev, David S. Miller, Bartlomiej Zolnierkiewicz,
linux-ide
In-Reply-To: <40b6281d-3aed-bff1-79fc-09a293d37b7f@c-s.fr>
On 02/14/2019 06:54 PM, Christophe Leroy wrote:
>
>
> Le 13/02/2019 à 16:27, Christophe Leroy a écrit :
>>
>>
>> Le 13/02/2019 à 13:53, sgosavi1 a écrit :
>>>> Why using 4.15.13 which is obsolete instead of using one of the Long
>>>> Term Support versions which are still maintained, like 4.14 or 4.19 ?
>>>> (see the complete list at https://www.kernel.org/category/releases.html)
>>>
>>> Well, when I started this task 4.15.13 was probably the latest stable
>>> release and hence we decided to port this version. In the older kernel, we
>>> have the m8260_setup.c source file for our board where the function
>>> "io_block_mapping" was used to configure the non-standard IO port address
>>> starting at 0xe0000000 location. This address was passed as the base address
>>> followed by control address and IRQ number to the ide-core.ko module. In the
>>> new kernel we do not have an option to send these addresses and IRQ numbers
>>> as arguments to the driver. Instead the ide-generic.c source file in the new
>>> kernel uses the standard IO port values and IRQ values. I modified the code
>>> in the above file to used the addresses and IRQ number we used in the past.
>>> Also, added code in the "MMU_init" function call available under
>>> arch/PowerPC/init_32.c to setup the IO port address range by adding the
>>> "io_block_mapping" call and the required IO port address range.
>>>
>>> Is there anything else that needs to be added or how can we configure the
>>> desired IO address range in the new kernel?
>>>
>>
>> Maybe look around https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9a0e77f28b50128df0c9e26ae489e44e29a7270a
>>
>> Also look at ide_platform.c. I imagine there must be some way to set it up in your device tree.
Please don't add new users to subsystem deprecated almost 10 years ago..
>> Maybe Bartlomiej Zolnierkiewicz can help ?
>>
>> Christophe
>
> Le 14/02/2019 à 09:17, sgosavi1 a écrit :>> Maybe look around
>>
>> I have gone through this before and also tried the pata_platform driver but
>> no success yet. I haven't found any example that passes the IO ports and IRQ
>> information through the device tree to the driver code.
Please look at pata_of_platform.c driver from libata subsystem,
it should have all required functionality.
>> Thanks,
>> Sachin.
>
>
> Maybe someone from the IDE SUBSYSTEM would be able to help better ?
>
> Entire thread at http://linuxppc.10917.n7.nabble.com/Kernel-panic-when-loading-the-IDE-controller-driver-td150020.html#none
>
> Christophe
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
^ permalink raw reply
* [PATCH v1 4/4] clk: qoriq: Add clockgen support for lx2160a
From: Vabhav Sharma @ 2019-02-26 10:11 UTC (permalink / raw)
To: sudeep.holla@arm.com, oss@buserror.net,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, mturquette@baylibre.com,
sboyd@kernel.org, rjw@rjwysocki.net, viresh.kumar@linaro.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel-owner@vger.kernel.org, catalin.marinas@arm.com,
will.deacon@arm.com, gregkh@linuxfoundation.org, arnd@arndb.de,
kstewart@linuxfoundation.org, yamada.masahiro@socionext.com,
Leo Li, shawnguo@kernel.org
Cc: ulf.hansson@linaro.org, Yogesh Narayan Gaur, Andy Tang,
linux@armlinux.org.uk, adrian.hunter@intel.com, Vabhav Sharma
In-Reply-To: <1551132245-6089-1-git-send-email-vabhav.sharma@nxp.com>
From: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Add clockgen support for lx2160a.
Added entry for compat 'fsl,lx2160a-clockgen'.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/clk/clk-qoriq.c | 12 ++++++++++++
drivers/cpufreq/qoriq-cpufreq.c | 1 +
2 files changed, 13 insertions(+)
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index e75194a..288e8f0c 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -570,6 +570,17 @@ static const struct clockgen_chipinfo chipinfo[] = {
.flags = CG_VER3 | CG_LITTLE_ENDIAN,
},
{
+ .compat = "fsl,lx2160a-clockgen",
+ .cmux_groups = {
+ &clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+ },
+ .cmux_to_group = {
+ 0, 0, 0, 0, 1, 1, 1, 1, -1
+ },
+ .pll_mask = 0x37,
+ .flags = CG_VER3 | CG_LITTLE_ENDIAN,
+ },
+ {
.compat = "fsl,p2041-clockgen",
.guts_compat = "fsl,qoriq-device-config-1.0",
.init_periph = p2041_init_periph,
@@ -1426,6 +1437,7 @@ CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_ls1046a, "fsl,ls1046a-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_ls1088a, "fsl,ls1088a-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_lx2160a, "fsl,lx2160a-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_p2041, "fsl,p2041-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_p3041, "fsl,p3041-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_p4080, "fsl,p4080-clockgen", clockgen_init);
diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c
index 3d773f6..83921b7 100644
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c
@@ -295,6 +295,7 @@ static const struct of_device_id node_matches[] __initconst = {
{ .compatible = "fsl,ls1046a-clockgen", },
{ .compatible = "fsl,ls1088a-clockgen", },
{ .compatible = "fsl,ls2080a-clockgen", },
+ { .compatible = "fsl,lx2160a-clockgen", },
{ .compatible = "fsl,p4080-clockgen", },
{ .compatible = "fsl,qoriq-clockgen-1.0", },
{ .compatible = "fsl,qoriq-clockgen-2.0", },
--
2.7.4
^ permalink raw reply related
* [PATCH v1 3/4] clk: qoriq: increase array size of cmux_to_group
From: Vabhav Sharma @ 2019-02-26 10:11 UTC (permalink / raw)
To: sudeep.holla@arm.com, oss@buserror.net,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, mturquette@baylibre.com,
sboyd@kernel.org, rjw@rjwysocki.net, viresh.kumar@linaro.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel-owner@vger.kernel.org, catalin.marinas@arm.com,
will.deacon@arm.com, gregkh@linuxfoundation.org, arnd@arndb.de,
kstewart@linuxfoundation.org, yamada.masahiro@socionext.com,
Leo Li, shawnguo@kernel.org
Cc: ulf.hansson@linaro.org, Yogesh Narayan Gaur,
linux@armlinux.org.uk, Vabhav Sharma, adrian.hunter@intel.com
In-Reply-To: <1551132245-6089-1-git-send-email-vabhav.sharma@nxp.com>
From: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Increase size of cmux_to_group array, to accomdate entry of
-1 termination.
Added -1, terminated, entry for 4080_cmux_grpX.
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
---
drivers/clk/clk-qoriq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 5baa9e0..e75194a 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -79,7 +79,7 @@ struct clockgen_chipinfo {
const struct clockgen_muxinfo *cmux_groups[2];
const struct clockgen_muxinfo *hwaccel[NUM_HWACCEL];
void (*init_periph)(struct clockgen *cg);
- int cmux_to_group[NUM_CMUX]; /* -1 terminates if fewer than NUM_CMUX */
+ int cmux_to_group[NUM_CMUX+1]; /* array should be -1 terminated */
u32 pll_mask; /* 1 << n bit set if PLL n is valid */
u32 flags; /* CG_xxx */
};
@@ -601,7 +601,7 @@ static const struct clockgen_chipinfo chipinfo[] = {
&p4080_cmux_grp1, &p4080_cmux_grp2
},
.cmux_to_group = {
- 0, 0, 0, 0, 1, 1, 1, 1
+ 0, 0, 0, 0, 1, 1, 1, 1, -1
},
.pll_mask = 0x1f,
},
--
2.7.4
^ permalink raw reply related
* [PATCH v1 2/4] soc/fsl/guts: Add definition for LX2160A
From: Vabhav Sharma @ 2019-02-26 10:10 UTC (permalink / raw)
To: sudeep.holla@arm.com, oss@buserror.net,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, mturquette@baylibre.com,
sboyd@kernel.org, rjw@rjwysocki.net, viresh.kumar@linaro.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel-owner@vger.kernel.org, catalin.marinas@arm.com,
will.deacon@arm.com, gregkh@linuxfoundation.org, arnd@arndb.de,
kstewart@linuxfoundation.org, yamada.masahiro@socionext.com,
Leo Li, shawnguo@kernel.org
Cc: ulf.hansson@linaro.org, Yinbo Zhu, linux@armlinux.org.uk,
Vabhav Sharma, adrian.hunter@intel.com
In-Reply-To: <1551132245-6089-1-git-send-email-vabhav.sharma@nxp.com>
Adding compatible string "lx2160a-dcfg" to
initialize guts driver for lx2160 and SoC die
attribute definition for LX2160A
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
---
drivers/soc/fsl/guts.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c
index 302e0c8..bcab1ee 100644
--- a/drivers/soc/fsl/guts.c
+++ b/drivers/soc/fsl/guts.c
@@ -100,6 +100,11 @@ static const struct fsl_soc_die_attr fsl_soc_die[] = {
.svr = 0x87000000,
.mask = 0xfff70000,
},
+ /* Die: LX2160A, SoC: LX2160A/LX2120A/LX2080A */
+ { .die = "LX2160A",
+ .svr = 0x87360000,
+ .mask = 0xff3f0000,
+ },
{ },
};
@@ -222,6 +227,7 @@ static const struct of_device_id fsl_guts_of_match[] = {
{ .compatible = "fsl,ls1088a-dcfg", },
{ .compatible = "fsl,ls1012a-dcfg", },
{ .compatible = "fsl,ls1046a-dcfg", },
+ { .compatible = "fsl,lx2160a-dcfg", },
{}
};
MODULE_DEVICE_TABLE(of, fsl_guts_of_match);
--
2.7.4
^ permalink raw reply related
* [PATCH v1 1/4] dt-bindings: arm64: add compatible for LX2160A
From: Vabhav Sharma @ 2019-02-26 10:10 UTC (permalink / raw)
To: sudeep.holla@arm.com, oss@buserror.net,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, mturquette@baylibre.com,
sboyd@kernel.org, rjw@rjwysocki.net, viresh.kumar@linaro.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel-owner@vger.kernel.org, catalin.marinas@arm.com,
will.deacon@arm.com, gregkh@linuxfoundation.org, arnd@arndb.de,
kstewart@linuxfoundation.org, yamada.masahiro@socionext.com,
Leo Li, shawnguo@kernel.org
Cc: ulf.hansson@linaro.org, linux@armlinux.org.uk, Vabhav Sharma,
adrian.hunter@intel.com
In-Reply-To: <1551132245-6089-1-git-send-email-vabhav.sharma@nxp.com>
Add compatible for LX2160A SoC,QDS and RDB board
Add lx2160a compatible for clockgen and dcfg
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/arm/freescale/fsl,layerscape-dcfg.txt | 2 +-
Documentation/devicetree/bindings/arm/fsl.txt | 12 ++++++++++++
Documentation/devicetree/bindings/clock/qoriq-clock.txt | 1 +
3 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
index b5cb374..dc76046 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
@@ -8,7 +8,7 @@ Required properties:
- compatible: Should contain a chip-specific compatible string,
Chip-specific strings are of the form "fsl,<chip>-dcfg",
The following <chip>s are known to be supported:
- ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
+ ls1012a, ls1021a, ls1043a, ls1046a, ls2080a, lx2160a.
- reg : should contain base address and length of DCFG memory-mapped registers
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index 7fbc424..baef162 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -235,3 +235,15 @@ Required root node properties:
LS2088A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
+
+LX2160A SoC
+Required root node properties:
+ - compatible = "fsl,lx2160a";
+
+LX2160A ARMv8 based QDS Board
+Required root node properties:
+ - compatible = "fsl,lx2160a-qds", "fsl,lx2160a";
+
+LX2160A ARMv8 based RDB Board
+Required root node properties:
+ - compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
index c655f28..f322989 100644
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -43,6 +43,7 @@ Required properties:
* "fsl,ls1046a-clockgen"
* "fsl,ls1088a-clockgen"
* "fsl,ls2080a-clockgen"
+ * "fsl,lx2160a-clockgen"
Chassis-version clock strings include:
* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
--
2.7.4
^ permalink raw reply related
* [PATCH v1 0/4] arm64: dts: NXP: add basic dts file for LX2160A SoC
From: Vabhav Sharma @ 2019-02-26 10:10 UTC (permalink / raw)
To: sudeep.holla@arm.com, oss@buserror.net,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, mturquette@baylibre.com,
sboyd@kernel.org, rjw@rjwysocki.net, viresh.kumar@linaro.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel-owner@vger.kernel.org, catalin.marinas@arm.com,
will.deacon@arm.com, gregkh@linuxfoundation.org, arnd@arndb.de,
kstewart@linuxfoundation.org, yamada.masahiro@socionext.com,
Leo Li, shawnguo@kernel.org
Cc: ulf.hansson@linaro.org, linux@armlinux.org.uk, Vabhav Sharma,
adrian.hunter@intel.com
These patches were reviewed and acked but dropped during merge window.
Patchwork link was https://lore.kernel.org/patchwork/cover/1004155/
Changes for v1:
- Updated lx2160a clockgen in alphabetical order
Vabhav Sharma (2):
dt-bindings: arm64: add compatible for LX2160A
soc/fsl/guts: Add definition for LX2160A
Yogesh Gaur (2):
clk: qoriq: increase array size of cmux_to_group
clk: qoriq: Add clockgen support for lx2160a
.../bindings/arm/freescale/fsl,layerscape-dcfg.txt | 2 +-
Documentation/devicetree/bindings/arm/fsl.txt | 12 ++++++++++++
Documentation/devicetree/bindings/clock/qoriq-clock.txt | 1 +
drivers/clk/clk-qoriq.c | 16 ++++++++++++++--
drivers/cpufreq/qoriq-cpufreq.c | 1 +
drivers/soc/fsl/guts.c | 6 ++++++
6 files changed, 35 insertions(+), 3 deletions(-)
--
2.7.4
^ permalink raw reply
* RE: [PATCH 4/4] clk: qoriq: Add clockgen support for lx2160a
From: Vabhav Sharma @ 2019-02-26 10:09 UTC (permalink / raw)
To: Scott Wood, sudeep.holla@arm.com, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, robh+dt@kernel.org,
mark.rutland@arm.com, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, mturquette@baylibre.com,
sboyd@kernel.org, rjw@rjwysocki.net, viresh.kumar@linaro.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel-owner@vger.kernel.org, catalin.marinas@arm.com,
will.deacon@arm.com, gregkh@linuxfoundation.org, arnd@arndb.de,
kstewart@linuxfoundation.org, yamada.masahiro@socionext.com,
Leo Li, shawnguo@kernel.org
Cc: ulf.hansson@linaro.org, Yogesh Narayan Gaur, Andy Tang,
linux@armlinux.org.uk, adrian.hunter@intel.com
In-Reply-To: <07441256501ad8bd45b187cf6e25338b028bc9ac.camel@buserror.net>
> -----Original Message-----
> From: Scott Wood <oss@buserror.net>
> Sent: Tuesday, February 26, 2019 3:15 PM
> To: Vabhav Sharma <vabhav.sharma@nxp.com>; sudeep.holla@arm.com;
> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org;
> robh+dt@kernel.org; mark.rutland@arm.com; linuxppc-dev@lists.ozlabs.org;
> linux-arm-kernel@lists.infradead.org; mturquette@baylibre.com;
> sboyd@kernel.org; rjw@rjwysocki.net; viresh.kumar@linaro.org; linux-
> clk@vger.kernel.org; linux-pm@vger.kernel.org; linux-kernel-
> owner@vger.kernel.org; catalin.marinas@arm.com; will.deacon@arm.com;
> gregkh@linuxfoundation.org; arnd@arndb.de;
> kstewart@linuxfoundation.org; yamada.masahiro@socionext.com; Leo Li
> <leoyang.li@nxp.com>; shawnguo@kernel.org
> Cc: linux@armlinux.org.uk; adrian.hunter@intel.com;
> ulf.hansson@linaro.org; Yogesh Narayan Gaur
> <yogeshnarayan.gaur@nxp.com>; Andy Tang <andy.tang@nxp.com>
> Subject: Re: [PATCH 4/4] clk: qoriq: Add clockgen support for lx2160a
>
> On Tue, 2019-02-26 at 08:34 +0000, Vabhav Sharma wrote:
> > @@ -1435,6 +1446,7 @@ CLK_OF_DECLARE(qoriq_clockgen_t1023,
> "fsl,t1023-
> > clockgen", clockgen_init); CLK_OF_DECLARE(qoriq_clockgen_t1040,
> > "fsl,t1040-clockgen", clockgen_init);
> > CLK_OF_DECLARE(qoriq_clockgen_t2080, "fsl,t2080-clockgen",
> > clockgen_init); CLK_OF_DECLARE(qoriq_clockgen_t4240,
> > "fsl,t4240-clockgen", clockgen_init);
> > +CLK_OF_DECLARE(qoriq_clockgen_lx2160a, "fsl,lx2160a-clockgen",
> > clockgen_init);
>
> The chips were previously in alphabetical order...
Ok
>
> -Scott
>
^ permalink raw reply
* Re: build failure of current mmotm with skiroot_defconfig
From: Mike Rapoport @ 2019-02-26 9:59 UTC (permalink / raw)
To: Christophe Leroy; +Cc: Andrew Morton, linuxppc-dev, Paul Mackerras
In-Reply-To: <3844e8ab-ed20-c202-2e65-6179631b7d91@c-s.fr>
On Tue, Feb 26, 2019 at 10:39:54AM +0100, Christophe Leroy wrote:
>
>
> Le 26/02/2019 à 09:12, Mike Rapoport a écrit :
> >Hi,
> >
> >I've encountered the following error when building skyroot_defconfig with
> >current mmotm tree:
> >
> >make CONFIG_OF_ALL_DTBS=y CONFIG_DTC=y CROSS_COMPILE=/opt/gcc-8.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux- ARCH=powerpc vmlinux
> > ...
> > CC arch/powerpc/kernel/dbell.o
> >In file included from arch/powerpc/kernel/dbell.c:20:
> >arch/powerpc/include/asm/kvm_ppc.h: In function 'xics_on_xive':
> >arch/powerpc/include/asm/kvm_ppc.h:625:9: error: implicit declaration of function 'xive_enabled'; did you mean 'eeh_enabled'? [-Werror=implicit-function-declaration]
> > return xive_enabled() && cpu_has_feature(CPU_FTR_HVMODE);
> > ^~~~~~~~~~~~
> > eeh_enabled
>
> I can neither find the above in arch/powerpc/include/asm/kvm_ppc.h in the
> powerpc tree, nor a patch removing it.
>
> Where does that comes from ?
It's from current mmotm, probably some merge conflict...
> Christophe
>
> >cc1: all warnings being treated as errors
> >scripts/Makefile.build:278: recipe for target 'arch/powerpc/kernel/dbell.o' failed
> >make[3]: *** [arch/powerpc/kernel/dbell.o] Error 1
> >scripts/Makefile.build:493: recipe for target 'arch/powerpc/kernel' failed
> >make[2]: *** [arch/powerpc/kernel] Error 2
> >Makefile:1049: recipe for target 'arch/powerpc' failed
> >make[1]: *** [arch/powerpc] Error 2
> >
> >
>
--
Sincerely yours,
Mike.
^ permalink raw reply
* Re: [PATCH 4/4] clk: qoriq: Add clockgen support for lx2160a
From: Scott Wood @ 2019-02-26 9:45 UTC (permalink / raw)
To: Vabhav Sharma, sudeep.holla@arm.com, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, robh+dt@kernel.org,
mark.rutland@arm.com, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, mturquette@baylibre.com,
sboyd@kernel.org, rjw@rjwysocki.net, viresh.kumar@linaro.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel-owner@vger.kernel.org, catalin.marinas@arm.com,
will.deacon@arm.com, gregkh@linuxfoundation.org, arnd@arndb.de,
kstewart@linuxfoundation.org, yamada.masahiro@socionext.com,
Leo Li, shawnguo@kernel.org
Cc: ulf.hansson@linaro.org, Yogesh Narayan Gaur, Andy Tang,
linux@armlinux.org.uk, adrian.hunter@intel.com
In-Reply-To: <1551126463-5341-5-git-send-email-vabhav.sharma@nxp.com>
On Tue, 2019-02-26 at 08:34 +0000, Vabhav Sharma wrote:
> @@ -1435,6 +1446,7 @@ CLK_OF_DECLARE(qoriq_clockgen_t1023, "fsl,t1023-
> clockgen", clockgen_init);
> CLK_OF_DECLARE(qoriq_clockgen_t1040, "fsl,t1040-clockgen", clockgen_init);
> CLK_OF_DECLARE(qoriq_clockgen_t2080, "fsl,t2080-clockgen", clockgen_init);
> CLK_OF_DECLARE(qoriq_clockgen_t4240, "fsl,t4240-clockgen", clockgen_init);
> +CLK_OF_DECLARE(qoriq_clockgen_lx2160a, "fsl,lx2160a-clockgen",
> clockgen_init);
The chips were previously in alphabetical order...
-Scott
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox