* Re: [PATCH] scsi: target/sbp: remove firewire SBP target driver
From: Finn Thain @ 2020-06-16 9:42 UTC (permalink / raw)
To: Chris Boot
Cc: Bart Van Assche, linux-scsi, Chuhong Yuan, linux-kernel,
Nicholas Bellinger, target-devel, Martin K . Petersen,
linux1394-devel, linuxppc-dev, Stefan Richter
In-Reply-To: <8da0c285-d707-a3d2-063e-472af5cc560f@boo.tc>
On Mon, 15 Jun 2020, Chris Boot wrote:
> On 15/06/2020 00:28, Finn Thain wrote:
> > On Sun, 14 Jun 2020, Chris Boot wrote:
> >
> >> I expect that if someone finds this useful it can stick around (but
> >> that's not my call).
> >
> > Who's call is that? If the patch had said "From: Martin K. Petersen"
> > and "This driver is being removed because it has the following
> > defects..." that would be some indication of a good-faith willingness
> > to accept users as developers in the spirit of the GPL, which is what
> > you seem to be alluding to (?).
>
> If you're asking me, I'd say it was martin's call:
>
> > SCSI TARGET SUBSYSTEM
> > M: "Martin K. Petersen" <martin.petersen@oracle.com>
> [...]
> > F: drivers/target/
> > F: include/target/
>
The question I asked you was intended to make you think. I wasn't asking
you to search MAINTAINERS for "drivers/target" (I had already done so).
Chris, you can find my name in that file too. That's because I see my role
as custodian of that particular code. That code lives in the kernel.org
tree because others put it there and because users find it useful -- not
merely because it happens to please the official glorious MAINTAINER of
said code.
If you would ask, "who's call is it to delete drivers/nubus? or
drivers/scsi/NCR5380.c?" my answer is, I have no idea.
> >> I just don't have the time or inclination or hardware to be able to
> >> maintain it anymore, so someone else would have to pick it up.
> >>
> >
> > Which is why most drivers get orphaned, right?
>
> Sure, but that's not what Martin asked me to do, hence this patch.
>
Martin said, "I'd appreciate a patch to remove it"
And Bart said, "do you want to keep this driver in the kernel tree?"
AFAICT both comments are quite ambiguous. I don't see an actionable
request, just an expression of interest from people doing their jobs.
Note well: there is no pay check associated with having a MAINTAINERS file
entry.
^ permalink raw reply
* Re: [PATCH v2 08/12] mm: Define pasid in mm
From: Jean-Philippe Brucker @ 2020-06-16 8:28 UTC (permalink / raw)
To: Fenghua Yu
Cc: Dave Hansen, H Peter Anvin, Dave Jiang, Ashok Raj, Joerg Roedel,
x86, amd-gfx, Ingo Molnar, Ravi V Shankar, Yu-cheng Yu,
Andrew Donnellan, Borislav Petkov, Sohil Mehta, Thomas Gleixner,
Tony Luck, linuxppc-dev, Felix Kuehling, linux-kernel, iommu,
Jacob Jun Pan, Frederic Barrat, David Woodhouse, Lu Baolu
In-Reply-To: <1592008893-9388-9-git-send-email-fenghua.yu@intel.com>
On Fri, Jun 12, 2020 at 05:41:29PM -0700, Fenghua Yu wrote:
> diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
> index 64ede5f150dc..5778db3aa42d 100644
> --- a/include/linux/mm_types.h
> +++ b/include/linux/mm_types.h
> @@ -538,6 +538,10 @@ struct mm_struct {
> atomic_long_t hugetlb_usage;
> #endif
> struct work_struct async_put_work;
> +
> +#ifdef CONFIG_PCI_PASID
Non-PCI devices can also use a PASID (e.g. Arm's SubstreamID). How about
CONFIG_IOMMU_SUPPORT?
Thanks,
Jean
> + unsigned int pasid;
> +#endif
^ permalink raw reply
* Re: [PATCH 2/2] cpufreq: Specify default governor on command line
From: Viresh Kumar @ 2020-06-16 9:27 UTC (permalink / raw)
To: Quentin Perret
Cc: juri.lelli, kernel-team, vincent.guittot, arnd, rafael, peterz,
adharmap, linux-pm, rjw, linux-kernel, mingo, paulus,
linuxppc-dev, tkjos
In-Reply-To: <20200616083107.GA122049@google.com>
On 16-06-20, 09:31, Quentin Perret wrote:
> Right, so the reason I avoided cpufreq_core_init() was because it is
> called at core_initcall() time, which means I can't really assume the
> governors have been loaded by that time. By waiting for the driver to
> probe before detecting the default gov, we get that nice ordering. But
> yes, it feels odd to have it here :/
>
> Thinking about it more, the natural fit for this would rather be the
> register/unregister path for governors directly. If that sounds good to
> you (?) I'll try to move it there in v2.
There is another problem here which we need to look at. Any governor
which is built as a module and isn't currently used, should be allowed
to unload. And this needs to be tested by you as well, should be easy
enough.
With the current implementation, you take a reference to the default
governor when the driver is registered and drop it only when the
driver goes away. Which means we won't be able to unload the module of
the governor even if it isn't used. Which is wrong. The solution I
proposed had the same issue as well.
You need to figure out a way where we don't need to keep holding the
module hostage even when it isn't used. I see two ways at least for
the same:
- Do that from the existing place: cpufreq_init_policy().
- And I think this can be done from governor-register/unregister as
well.
Second one sounds good, if it is feasible to do that.
--
viresh
^ permalink raw reply
* Re: [PATCH v4 1/3] mm/slab: Use memzero_explicit() in kzfree()
From: Dan Carpenter @ 2020-06-16 9:08 UTC (permalink / raw)
To: Michal Hocko
Cc: Jason A . Donenfeld, Jarkko Sakkinen, virtualization,
David Howells, linux-mm, linux-sctp, keyrings, kasan-dev,
linux-stm32, devel, linux-cifs, linux-scsi, James Morris,
Matthew Wilcox, David Rientjes, Waiman Long, linux-pm, ecryptfs,
linuxppc-dev, wireguard, linux-fscrypt, linux-mediatek,
linux-amlogic, Andrew Morton, linux-nfs, Linus Torvalds,
linux-wireless, David Sterba, stable, linux-kernel,
linux-bluetooth, linux-security-module, target-devel,
tipc-discussion, linux-crypto, Johannes Weiner, Joe Perches,
linux-integrity, linux-wpan, netdev, linux-btrfs, linux-ppp
In-Reply-To: <20200616064208.GA9499@dhcp22.suse.cz>
On Tue, Jun 16, 2020 at 08:42:08AM +0200, Michal Hocko wrote:
> On Mon 15-06-20 21:57:16, Waiman Long wrote:
> > The kzfree() function is normally used to clear some sensitive
> > information, like encryption keys, in the buffer before freeing it back
> > to the pool. Memset() is currently used for the buffer clearing. However,
> > it is entirely possible that the compiler may choose to optimize away the
> > memory clearing especially if LTO is being used. To make sure that this
> > optimization will not happen, memzero_explicit(), which is introduced
> > in v3.18, is now used in kzfree() to do the clearing.
> >
> > Fixes: 3ef0e5ba4673 ("slab: introduce kzfree()")
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Waiman Long <longman@redhat.com>
>
> Acked-by: Michal Hocko <mhocko@suse.com>
>
> Although I am not really sure this is a stable material. Is there any
> known instance where the memset was optimized out from kzfree?
I told him to add the stable. Otherwise it will just get reported to
me again. It's a just safer to backport it before we forget.
regards,
dan carpenter
^ permalink raw reply
* Re: [PATCH 1/2] cpufreq: Register governors at core_initcall
From: Quentin Perret @ 2020-06-16 8:31 UTC (permalink / raw)
To: Viresh Kumar
Cc: juri.lelli, kernel-team, vincent.guittot, arnd, rafael, peterz,
adharmap, linux-pm, rjw, linux-kernel, mingo, paulus,
linuxppc-dev, tkjos
In-Reply-To: <20200616042831.3kazrpvvjhbahoaj@vireshk-i7>
On Tuesday 16 Jun 2020 at 09:58:31 (+0530), Viresh Kumar wrote:
> On 15-06-20, 17:55, Quentin Perret wrote:
> > Currently, most CPUFreq governors are registered at core_initcall time
> > when used as default, and module_init otherwise. In preparation for
> > letting users specify the default governor on the kernel command line,
> > change all of them to use core_initcall unconditionally, as is already
> > the case for schedutil and performance. This will enable us to assume
> > builtin governors have been registered before the builtin CPUFreq
> > drivers probe.
> >
> > And since all governors now have similar init/exit patterns, introduce
> > two new macros cpufreq_governor_{init,exit}() to factorize the code.
> >
> > Signed-off-by: Quentin Perret <qperret@google.com>
> > ---
> > Note: I couldn't boot-test the change to spudemand, by lack of hardware.
> > But I can confirm cell_defconfig compiles just fine.
> > ---
> > .../platforms/cell/cpufreq_spudemand.c | 26 ++-----------------
> > drivers/cpufreq/cpufreq_conservative.c | 22 ++++------------
> > drivers/cpufreq/cpufreq_ondemand.c | 24 +++++------------
> > drivers/cpufreq/cpufreq_performance.c | 14 ++--------
> > drivers/cpufreq/cpufreq_powersave.c | 18 +++----------
> > drivers/cpufreq/cpufreq_userspace.c | 18 +++----------
> > include/linux/cpufreq.h | 14 ++++++++++
> > kernel/sched/cpufreq_schedutil.c | 6 +----
> > 8 files changed, 36 insertions(+), 106 deletions(-)
>
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Thanks!
Quentin
^ permalink raw reply
* Re: [PATCH 2/2] cpufreq: Specify default governor on command line
From: Quentin Perret @ 2020-06-16 8:31 UTC (permalink / raw)
To: Viresh Kumar
Cc: juri.lelli, kernel-team, vincent.guittot, arnd, rafael, peterz,
adharmap, linux-pm, rjw, linux-kernel, mingo, paulus,
linuxppc-dev, tkjos
In-Reply-To: <20200616043143.obk5k3rv737j5dnd@vireshk-i7>
Hey Viresh,
On Tuesday 16 Jun 2020 at 10:01:43 (+0530), Viresh Kumar wrote:
> On 15-06-20, 17:55, Quentin Perret wrote:
> > +static void cpufreq_get_default_governor(void)
> > +{
> > + default_governor = cpufreq_parse_governor(cpufreq_param_governor);
> > + if (!default_governor) {
> > + if (*cpufreq_param_governor)
> > + pr_warn("Failed to find %s\n", cpufreq_param_governor);
> > + default_governor = cpufreq_default_governor();
>
> A module_get() never happened for this case and so maybe a
> module_put() should never get called.
Correct, however cpufreq_default_governor() being a weak function, we're
basically guaranteed the governor we get from there is builtin, so
gov->owner is NULL. That is, module_put() is not actively useful, but it
doesn't harm. So I figured that should be fine. That could definitely
use a comment, though :)
> > + }
> > +}
> > +
> > +static void cpufreq_put_default_governor(void)
> > +{
> > + if (!default_governor)
> > + return;
> > + module_put(default_governor->owner);
> > + default_governor = NULL;
> > +}
> > +
> > static int cpufreq_init_governor(struct cpufreq_policy *policy)
> > {
> > int ret;
> > @@ -2701,6 +2721,8 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
> >
> > if (driver_data->setpolicy)
> > driver_data->flags |= CPUFREQ_CONST_LOOPS;
> > + else
> > + cpufreq_get_default_governor();
> >
> > if (cpufreq_boost_supported()) {
> > ret = create_boost_sysfs_file();
> > @@ -2769,6 +2791,7 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver)
> > subsys_interface_unregister(&cpufreq_interface);
> > remove_boost_sysfs_file();
> > cpuhp_remove_state_nocalls_cpuslocked(hp_online);
> > + cpufreq_put_default_governor();
> >
> > write_lock_irqsave(&cpufreq_driver_lock, flags);
> >
> > @@ -2792,4 +2815,5 @@ static int __init cpufreq_core_init(void)
> > return 0;
> > }
>
> And since this is a per boot thing, there is perhaps no need of doing
> these at driver register/unregister, I would rather do it at:
> cpufreq_core_init() time itself and so we will never need to run
> cpufreq_put_default_governor() and so can be removed.
Right, so the reason I avoided cpufreq_core_init() was because it is
called at core_initcall() time, which means I can't really assume the
governors have been loaded by that time. By waiting for the driver to
probe before detecting the default gov, we get that nice ordering. But
yes, it feels odd to have it here :/
Thinking about it more, the natural fit for this would rather be the
register/unregister path for governors directly. If that sounds good to
you (?) I'll try to move it there in v2.
> And another thing I am not able to understand (despite you commenting
> about that in the commit log) is what happens if the default governor
> chosen is built as a module ?
So the answer is 'it depends'. If the driver is built as a module too,
then you should load the governor module first, and then the driver
module, and everything will work just fine.
But in the case where the governor is loaded _after_ the driver (either
because we got the module ordering wrong, or because the driver is
builtin), then the policies will be initialized with the builtin
default, and nothing special will happen when the governor module is
loaded.
That behaviour very much is open for discussion, though. A possible
alternative would be to automatically switch all policies to the default
governor upon loading. That would have the nice benefit or removing the
ordering dependency, but that is more involved and I didn't have a
use-case for it, so I went for the simpler option ('the-default
governor-needs-to-be-registered-before-the-policies-are-created').
Thoughts?
Thanks,
Quentin
^ permalink raw reply
* Re: [PATCH V2] powerpc/pseries/svm: Drop unused align argument in alloc_shared_lppaca() function
From: Laurent Dufour @ 2020-06-16 8:24 UTC (permalink / raw)
To: Satheesh Rajendran, linuxppc-dev
Cc: Sukadev Bhattiprolu, Ram Pai, linux-kernel, Thiago Jung Bauermann
In-Reply-To: <20200612142953.135408-1-sathnaga@linux.vnet.ibm.com>
Le 12/06/2020 à 16:29, Satheesh Rajendran a écrit :
> Argument "align" in alloc_shared_lppaca() was unused inside the
> function. Let's drop it and update code comment for page alignment.
>
> Cc: linux-kernel@vger.kernel.org
> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
> Cc: Ram Pai <linuxram@us.ibm.com>
> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
> Cc: Laurent Dufour <ldufour@linux.ibm.com>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
> Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
> ---
>
> V2:
> Added reviewed by Thiago.
> Dropped align argument as per Michael suggest.
> Modified commit msg.
>
> V1: http://patchwork.ozlabs.org/project/linuxppc-dev/patch/20200609113909.17236-1-sathnaga@linux.vnet.ibm.com/
> ---
> arch/powerpc/kernel/paca.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
> index 8d96169c597e..a174d64d9b4d 100644
> --- a/arch/powerpc/kernel/paca.c
> +++ b/arch/powerpc/kernel/paca.c
> @@ -57,8 +57,8 @@ static void *__init alloc_paca_data(unsigned long size, unsigned long align,
>
> #define LPPACA_SIZE 0x400
>
> -static void *__init alloc_shared_lppaca(unsigned long size, unsigned long align,
> - unsigned long limit, int cpu)
> +static void *__init alloc_shared_lppaca(unsigned long size, unsigned long limit,
> + int cpu)
> {
> size_t shared_lppaca_total_size = PAGE_ALIGN(nr_cpu_ids * LPPACA_SIZE);
> static unsigned long shared_lppaca_size;
> @@ -68,6 +68,12 @@ static void *__init alloc_shared_lppaca(unsigned long size, unsigned long align,
> if (!shared_lppaca) {
> memblock_set_bottom_up(true);
>
> + /* See Documentation/powerpc/ultravisor.rst for mode details
> + *
> + * UV/HV data share is in PAGE granularity, In order to
> + * minimize the number of pages shared and maximize the
> + * use of a page, let's use page align.
> + */
> shared_lppaca =
> memblock_alloc_try_nid(shared_lppaca_total_size,
> PAGE_SIZE, MEMBLOCK_LOW_LIMIT,
> @@ -122,7 +128,7 @@ static struct lppaca * __init new_lppaca(int cpu, unsigned long limit)
> return NULL;
>
> if (is_secure_guest())
> - lp = alloc_shared_lppaca(LPPACA_SIZE, 0x400, limit, cpu);
> + lp = alloc_shared_lppaca(LPPACA_SIZE, limit, cpu);
> else
> lp = alloc_paca_data(LPPACA_SIZE, 0x400, limit, cpu);
>
>
^ permalink raw reply
* [PATCH 2/2] ASoC: fsl-asoc-card: Add MQS support
From: Shengjiu Wang @ 2020-06-16 7:30 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, broonie, perex, tiwai,
alsa-devel, lgirdwood, robh+dt, devicetree
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <1592292637-25734-1-git-send-email-shengjiu.wang@nxp.com>
The MQS codec isn't an i2c device, so add a new platform device for it.
MQS only support playback, so add a new audio map.
Add there maybe "model" property or no "audio-routing" property in
devicetree, so add some enhancement for these two property.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/fsl-asoc-card.c | 70 ++++++++++++++++++++++++++---------
1 file changed, 52 insertions(+), 18 deletions(-)
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index 00be73900888..2ac8cb9ddd10 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -119,6 +119,13 @@ static const struct snd_soc_dapm_route audio_map_ac97[] = {
{"ASRC-Capture", NULL, "AC97 Capture"},
};
+static const struct snd_soc_dapm_route audio_map_tx[] = {
+ /* 1st half -- Normal DAPM routes */
+ {"Playback", NULL, "CPU-Playback"},
+ /* 2nd half -- ASRC DAPM routes */
+ {"CPU-Playback", NULL, "ASRC-Playback"},
+};
+
/* Add all possible widgets into here without being redundant */
static const struct snd_soc_dapm_widget fsl_asoc_card_dapm_widgets[] = {
SND_SOC_DAPM_LINE("Line Out Jack", NULL),
@@ -482,6 +489,7 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
{
struct device_node *cpu_np, *codec_np, *asrc_np;
struct device_node *np = pdev->dev.of_node;
+ struct platform_device *codec_pdev = NULL; /* used for non i2c device*/
struct platform_device *asrc_pdev = NULL;
struct platform_device *cpu_pdev;
struct fsl_asoc_card_priv *priv;
@@ -512,10 +520,13 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
}
codec_np = of_parse_phandle(np, "audio-codec", 0);
- if (codec_np)
+ if (codec_np) {
codec_dev = of_find_i2c_device_by_node(codec_np);
- else
+ if (!codec_dev)
+ codec_pdev = of_find_device_by_node(codec_np);
+ } else {
codec_dev = NULL;
+ }
asrc_np = of_parse_phandle(np, "audio-asrc", 0);
if (asrc_np)
@@ -525,6 +536,13 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
if (codec_dev) {
struct clk *codec_clk = clk_get(&codec_dev->dev, NULL);
+ if (!IS_ERR(codec_clk)) {
+ priv->codec_priv.mclk_freq = clk_get_rate(codec_clk);
+ clk_put(codec_clk);
+ }
+ } else if (codec_pdev) {
+ struct clk *codec_clk = clk_get(&codec_pdev->dev, NULL);
+
if (!IS_ERR(codec_clk)) {
priv->codec_priv.mclk_freq = clk_get_rate(codec_clk);
clk_put(codec_clk);
@@ -538,6 +556,11 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
/* Assign a default DAI format, and allow each card to overwrite it */
priv->dai_fmt = DAI_FMT_BASE;
+ memcpy(priv->dai_link, fsl_asoc_card_dai,
+ sizeof(struct snd_soc_dai_link) * ARRAY_SIZE(priv->dai_link));
+
+ priv->card.dapm_routes = audio_map;
+ priv->card.num_dapm_routes = ARRAY_SIZE(audio_map);
/* Diversify the card configurations */
if (of_device_is_compatible(np, "fsl,imx-audio-cs42888")) {
codec_dai_name = "cs42888";
@@ -573,13 +596,25 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
codec_dai_name = "ac97-hifi";
priv->card.set_bias_level = NULL;
priv->dai_fmt = SND_SOC_DAIFMT_AC97;
+ priv->card.dapm_routes = audio_map_ac97;
+ priv->card.num_dapm_routes = ARRAY_SIZE(audio_map_ac97);
+ } else if (of_device_is_compatible(np, "fsl,imx-audio-mqs")) {
+ codec_dai_name = "fsl-mqs-dai";
+ priv->card.set_bias_level = NULL;
+ priv->dai_fmt = SND_SOC_DAIFMT_LEFT_J |
+ SND_SOC_DAIFMT_CBS_CFS |
+ SND_SOC_DAIFMT_NB_NF;
+ priv->dai_link[1].dpcm_playback = 1;
+ priv->dai_link[2].dpcm_playback = 1;
+ priv->card.dapm_routes = audio_map_tx;
+ priv->card.num_dapm_routes = ARRAY_SIZE(audio_map_tx);
} else {
dev_err(&pdev->dev, "unknown Device Tree compatible\n");
ret = -EINVAL;
goto asrc_fail;
}
- if (!fsl_asoc_card_is_ac97(priv) && !codec_dev) {
+ if (!fsl_asoc_card_is_ac97(priv) && !codec_dev && !codec_pdev) {
dev_err(&pdev->dev, "failed to find codec device\n");
ret = -EPROBE_DEFER;
goto asrc_fail;
@@ -601,19 +636,18 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
priv->cpu_priv.sysclk_id[0] = FSL_SAI_CLK_MAST1;
}
- snprintf(priv->name, sizeof(priv->name), "%s-audio",
- fsl_asoc_card_is_ac97(priv) ? "ac97" :
- codec_dev->name);
-
/* Initialize sound card */
priv->pdev = pdev;
priv->card.dev = &pdev->dev;
- priv->card.name = priv->name;
+ ret = snd_soc_of_parse_card_name(&priv->card, "model");
+ if (ret) {
+ snprintf(priv->name, sizeof(priv->name), "%s-audio",
+ fsl_asoc_card_is_ac97(priv) ? "ac97" :
+ (codec_dev ? codec_dev->name : codec_pdev->name));
+ priv->card.name = priv->name;
+ }
priv->card.dai_link = priv->dai_link;
- priv->card.dapm_routes = fsl_asoc_card_is_ac97(priv) ?
- audio_map_ac97 : audio_map;
priv->card.late_probe = fsl_asoc_card_late_probe;
- priv->card.num_dapm_routes = ARRAY_SIZE(audio_map);
priv->card.dapm_widgets = fsl_asoc_card_dapm_widgets;
priv->card.num_dapm_widgets = ARRAY_SIZE(fsl_asoc_card_dapm_widgets);
@@ -621,13 +655,12 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
if (!asrc_pdev)
priv->card.num_dapm_routes /= 2;
- memcpy(priv->dai_link, fsl_asoc_card_dai,
- sizeof(struct snd_soc_dai_link) * ARRAY_SIZE(priv->dai_link));
-
- ret = snd_soc_of_parse_audio_routing(&priv->card, "audio-routing");
- if (ret) {
- dev_err(&pdev->dev, "failed to parse audio-routing: %d\n", ret);
- goto asrc_fail;
+ if (of_property_read_bool(np, "audio-routing")) {
+ ret = snd_soc_of_parse_audio_routing(&priv->card, "audio-routing");
+ if (ret) {
+ dev_err(&pdev->dev, "failed to parse audio-routing: %d\n", ret);
+ goto asrc_fail;
+ }
}
/* Normal DAI Link */
@@ -724,6 +757,7 @@ static const struct of_device_id fsl_asoc_card_dt_ids[] = {
{ .compatible = "fsl,imx-audio-sgtl5000", },
{ .compatible = "fsl,imx-audio-wm8962", },
{ .compatible = "fsl,imx-audio-wm8960", },
+ { .compatible = "fsl,imx-audio-mqs", },
{}
};
MODULE_DEVICE_TABLE(of, fsl_asoc_card_dt_ids);
--
2.21.0
^ permalink raw reply related
* [PATCH 1/2] ASoC: bindings: fsl-asoc-card: Add compatible string for MQS
From: Shengjiu Wang @ 2020-06-16 7:30 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, broonie, perex, tiwai,
alsa-devel, lgirdwood, robh+dt, devicetree
Cc: linuxppc-dev, linux-kernel
Add compatible string "fsl,imx-audio-mqs" for MQS
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
Documentation/devicetree/bindings/sound/fsl-asoc-card.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
index c60a5732d29c..6417c5dffa9a 100644
--- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -34,6 +34,8 @@ The compatible list for this generic sound card currently:
"fsl,imx-audio-wm8960"
+ "fsl,imx-audio-mqs"
+
Required properties:
- compatible : Contains one of entries in the compatible list.
--
2.21.0
^ permalink raw reply related
* [PATCH 2/2] ASoC: fsl_spdif: Add support for imx6sx platform
From: Shengjiu Wang @ 2020-06-16 6:42 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, broonie, perex, tiwai,
alsa-devel, lgirdwood, robh+dt, devicetree
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <1592289761-29118-1-git-send-email-shengjiu.wang@nxp.com>
The one difference on imx6sx platform is that the root clock
is shared with ASRC module, so we add a new flags "ind_root_clk"
which means the root clock is independent, then we will not
do the clk_set_rate and clk_round_rate to avoid impact ASRC
module usage.
As add a new flags, we include the soc specific data struct.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/fsl_spdif.c | 43 +++++++++++++++++++++++++++++++++++----
1 file changed, 39 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 1b2e516f9162..00e06803d32f 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -42,6 +42,17 @@ static u8 srpc_dpll_locked[] = { 0x0, 0x1, 0x2, 0x3, 0x4, 0xa, 0xb };
#define DEFAULT_RXCLK_SRC 1
+/**
+ * struct fsl_spdif_soc_data: soc specific data
+ *
+ * @imx: for imx platform
+ * @ind_root_clk: flag for round clk rate
+ */
+struct fsl_spdif_soc_data {
+ bool imx;
+ bool ind_root_clk;
+};
+
/*
* SPDIF control structure
* Defines channel status, subcode and Q sub
@@ -93,6 +104,7 @@ struct fsl_spdif_priv {
struct snd_soc_dai_driver cpu_dai_drv;
struct platform_device *pdev;
struct regmap *regmap;
+ const struct fsl_spdif_soc_data *soc;
bool dpll_locked;
u32 txrate[SPDIF_TXRATE_MAX];
u8 txclk_df[SPDIF_TXRATE_MAX];
@@ -110,6 +122,21 @@ struct fsl_spdif_priv {
u32 regcache_srpc;
};
+static struct fsl_spdif_soc_data fsl_spdif_vf610 = {
+ .imx = false,
+ .ind_root_clk = true,
+};
+
+static struct fsl_spdif_soc_data fsl_spdif_imx35 = {
+ .imx = true,
+ .ind_root_clk = true,
+};
+
+static struct fsl_spdif_soc_data fsl_spdif_imx6sx = {
+ .imx = true,
+ .ind_root_clk = false,
+};
+
/* DPLL locked and lock loss interrupt handler */
static void spdif_irq_dpll_lock(struct fsl_spdif_priv *spdif_priv)
{
@@ -421,7 +448,7 @@ static int spdif_set_sample_rate(struct snd_pcm_substream *substream,
sysclk_df = spdif_priv->sysclk_df[rate];
/* Don't mess up the clocks from other modules */
- if (clk != STC_TXCLK_SPDIF_ROOT)
+ if (clk != STC_TXCLK_SPDIF_ROOT || !spdif_priv->soc->ind_root_clk)
goto clk_set_bypass;
/* The S/PDIF block needs a clock of 64 * fs * txclk_df */
@@ -1186,7 +1213,8 @@ static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv,
continue;
ret = fsl_spdif_txclk_caldiv(spdif_priv, clk, savesub, index,
- i == STC_TXCLK_SPDIF_ROOT);
+ i == STC_TXCLK_SPDIF_ROOT &&
+ spdif_priv->soc->ind_root_clk);
if (savesub == ret)
continue;
@@ -1230,6 +1258,12 @@ static int fsl_spdif_probe(struct platform_device *pdev)
spdif_priv->pdev = pdev;
+ spdif_priv->soc = of_device_get_match_data(&pdev->dev);
+ if (!spdif_priv->soc) {
+ dev_err(&pdev->dev, "failed to get soc data\n");
+ return -ENODEV;
+ }
+
/* Initialize this copy of the CPU DAI driver structure */
memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai, sizeof(fsl_spdif_dai));
spdif_priv->cpu_dai_drv.name = dev_name(&pdev->dev);
@@ -1359,8 +1393,9 @@ static const struct dev_pm_ops fsl_spdif_pm = {
};
static const struct of_device_id fsl_spdif_dt_ids[] = {
- { .compatible = "fsl,imx35-spdif", },
- { .compatible = "fsl,vf610-spdif", },
+ { .compatible = "fsl,imx35-spdif", .data = &fsl_spdif_imx35, },
+ { .compatible = "fsl,vf610-spdif", .data = &fsl_spdif_vf610, },
+ { .compatible = "fsl,imx6sx-spdif", .data = &fsl_spdif_imx6sx, },
{}
};
MODULE_DEVICE_TABLE(of, fsl_spdif_dt_ids);
--
2.21.0
^ permalink raw reply related
* [PATCH 1/2] ASoC: bindings: fsl_spdif: Add new compatible string for imx6sx
From: Shengjiu Wang @ 2020-06-16 6:42 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, broonie, perex, tiwai,
alsa-devel, lgirdwood, robh+dt, devicetree
Cc: linuxppc-dev, linux-kernel
Add new compatible string "fsl,imx6sx-spdif" in the binding document.
And add compatible string "fsl,vf610-spdif" which was missed before.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
Documentation/devicetree/bindings/sound/fsl,spdif.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
index 8b324f82a782..e1365b0ee1e9 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -6,7 +6,11 @@ a fibre cable.
Required properties:
- - compatible : Compatible list, must contain "fsl,imx35-spdif".
+ - compatible : Compatible list, should contain one of the following
+ compatibles:
+ "fsl,imx35-spdif",
+ "fsl,vf610-spdif",
+ "fsl,imx6sx-spdif",
- reg : Offset and length of the register set for the device.
--
2.21.0
^ permalink raw reply related
* Re: [PATCH v4 1/3] mm/slab: Use memzero_explicit() in kzfree()
From: Michal Hocko @ 2020-06-16 6:42 UTC (permalink / raw)
To: Waiman Long
Cc: Jason A . Donenfeld, linux-btrfs, Jarkko Sakkinen, David Sterba,
David Howells, linux-mm, linux-sctp, keyrings, kasan-dev,
linux-stm32, devel, linux-cifs, linux-scsi, James Morris,
Matthew Wilcox, linux-wpan, David Rientjes, Dan Carpenter,
Serge E. Hallyn, linux-pm, ecryptfs, linux-fscrypt,
linux-mediatek, linux-amlogic, virtualization, linux-integrity,
linux-nfs, Linus Torvalds, linux-wireless, linux-kernel, stable,
linux-bluetooth, linux-security-module, target-devel,
tipc-discussion, linux-crypto, Johannes Weiner, Joe Perches,
Andrew Morton, linuxppc-dev, netdev, wireguard, linux-ppp
In-Reply-To: <20200616015718.7812-2-longman@redhat.com>
On Mon 15-06-20 21:57:16, Waiman Long wrote:
> The kzfree() function is normally used to clear some sensitive
> information, like encryption keys, in the buffer before freeing it back
> to the pool. Memset() is currently used for the buffer clearing. However,
> it is entirely possible that the compiler may choose to optimize away the
> memory clearing especially if LTO is being used. To make sure that this
> optimization will not happen, memzero_explicit(), which is introduced
> in v3.18, is now used in kzfree() to do the clearing.
>
> Fixes: 3ef0e5ba4673 ("slab: introduce kzfree()")
> Cc: stable@vger.kernel.org
> Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Although I am not really sure this is a stable material. Is there any
known instance where the memset was optimized out from kzfree?
> ---
> mm/slab_common.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/mm/slab_common.c b/mm/slab_common.c
> index 9e72ba224175..37d48a56431d 100644
> --- a/mm/slab_common.c
> +++ b/mm/slab_common.c
> @@ -1726,7 +1726,7 @@ void kzfree(const void *p)
> if (unlikely(ZERO_OR_NULL_PTR(mem)))
> return;
> ks = ksize(mem);
> - memset(mem, 0, ks);
> + memzero_explicit(mem, ks);
> kfree(mem);
> }
> EXPORT_SYMBOL(kzfree);
> --
> 2.18.1
>
--
Michal Hocko
SUSE Labs
^ permalink raw reply
* Re: [PATCH] powerpc/ptdump: Fix build failure in hashpagetable.c
From: Michael Ellerman @ 2020-06-16 6:42 UTC (permalink / raw)
To: Christophe Leroy, Benjamin Herrenschmidt, Paul Mackerras
Cc: linuxppc-dev, linux-kernel
In-Reply-To: <795158fc1d2b3dff3bf7347881947a887ea9391a.1592227105.git.christophe.leroy@csgroup.eu>
Christophe Leroy <christophe.leroy@csgroup.eu> writes:
> H_SUCCESS is only defined when CONFIG_PPC_PSERIES is defined.
It's always defined in hvcall.h, but it doesn't always get included via
plpar_wrappers.h.
It looks to be CONFIG_SMP=n that causes that, for SMP=y we get a copy
via asm/spinlock.h
> != H_SUCCESS means != 0. Modify the test accordingly.
I guess that's an OK solution.
> Reported-by: kernel test robot <lkp@intel.com>
> Fixes: 65e701b2d2a8 ("powerpc/ptdump: drop non vital #ifdefs")
> Cc: stable@vger.kernel.org
I don't think it needs to go to stable, none of the defconfigs hit it,
we don't even really support SMP=n for 64-bit book3s.
cheers
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
> arch/powerpc/mm/ptdump/hashpagetable.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/mm/ptdump/hashpagetable.c b/arch/powerpc/mm/ptdump/hashpagetable.c
> index a2c33efc7ce8..5b8bd34cd3a1 100644
> --- a/arch/powerpc/mm/ptdump/hashpagetable.c
> +++ b/arch/powerpc/mm/ptdump/hashpagetable.c
> @@ -258,7 +258,7 @@ static int pseries_find(unsigned long ea, int psize, bool primary, u64 *v, u64 *
> for (i = 0; i < HPTES_PER_GROUP; i += 4, hpte_group += 4) {
> lpar_rc = plpar_pte_read_4(0, hpte_group, (void *)ptes);
>
> - if (lpar_rc != H_SUCCESS)
> + if (lpar_rc)
> continue;
> for (j = 0; j < 4; j++) {
> if (HPTE_V_COMPARE(ptes[j].v, want_v) &&
> --
> 2.25.0
^ permalink raw reply
* Re: [PATCH v3] ASoC: fsl_ssi: Fix bclk calculation for mono channel
From: Nicolin Chen @ 2020-06-16 5:23 UTC (permalink / raw)
To: Shengjiu Wang
Cc: alsa-devel, timur, Xiubo.Lee, linuxppc-dev, tiwai, perex, broonie,
festevam, linux-kernel
In-Reply-To: <034eff1435ff6ce300b6c781130cefd9db22ab9a.1592276147.git.shengjiu.wang@nxp.com>
On Tue, Jun 16, 2020 at 10:53:48AM +0800, Shengjiu Wang wrote:
> For mono channel, SSI will switch to Normal mode.
>
> In Normal mode and Network mode, the Word Length Control bits
> control the word length divider in clock generator, which is
> different with I2S Master mode (the word length is fixed to
> 32bit), it should be the value of params_width(hw_params).
>
> The condition "slots == 2" is not good for I2S Master mode,
> because for Network mode and Normal mode, the slots can also
> be 2. Then we need to use (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK)
> to check if it is I2S Master mode.
>
> So we refine the formula for mono channel, otherwise there
> will be sound issue for S24_LE.
>
> Fixes: b0a7043d5c2c ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width")
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
^ permalink raw reply
* [PATCH v3] All arch: remove system call sys_sysctl
From: Xiaoming Ni @ 2020-06-16 3:07 UTC (permalink / raw)
To: rth, ink, mattst88, linux, catalin.marinas, will, tony.luck,
fenghua.yu, geert, monstr, tsbogend, James.Bottomley, deller, mpe,
benh, paulus, heiko.carstens, gor, borntraeger, ysato, dalias,
davem, luto, tglx, mingo, bp, hpa, chris, jcmvbkbc, mcgrof,
keescook, yzaikin, peterz, acme, mark.rutland, alexander.shishkin,
jolsa, namhyung, christian, dhowells, arnd, minchan, nixiaoming,
cyphar, mszeredi, krzk, olof, sudeep.holla, ebiederm, oleg, viro,
sargun, sfr, akpm, jongk, paulburton, zhouyanjie, svens, npiggin,
martin.petersen, flameeyes, axboe, bin.meng, vbabka, brgerst,
samitolvanen, linux, rdunlap, paulmck, elver, bauerman,
yamada.masahiro, dvyukov, ak, ravi.bangoria, naveen.n.rao
Cc: linux-s390, linux-ia64, linux-parisc, linux-sh, linux-api,
linux-xtensa, x86, linux-kernel, linux-mips, linux-fsdevel,
linux-m68k, alex.huangjianhui, linux-alpha, sparclinux,
chenzefeng2, linuxppc-dev, linux-arm-kernel
Since the commit 61a47c1ad3a4dc ("sysctl: Remove the sysctl system call"),
sys_sysctl is actually unavailable: any input can only return an error.
We have been warning about people using the sysctl system call for years
and believe there are no more users. Even if there are users of this
interface if they have not complained or fixed their code by now they
probably are not going to, so there is no point in warning them any
longer.
So completely remove sys_sysctl on all architectures.
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
changes in v3:
restore include/uapi/linux/sysctl.h
rebase on commit bc7d17d55762 ("Add linux-next specific files for 20200615")
Conflicts:
arch/sh/include/uapi/asm/unistd_64.h
arch/sh/kernel/syscalls_64.S
v2:
According to Kees Cook's suggestion, completely remove sys_sysctl on all arch
According to Eric W. Biederman's suggestion, update the commit log
V1: https://lore.kernel.org/lkml/1591683605-8585-1-git-send-email-nixiaoming@huawei.com/
Delete the code of sys_sysctl and return -ENOSYS directly at the function entry
---
arch/alpha/kernel/syscalls/syscall.tbl | 2 +-
arch/arm/configs/am200epdkit_defconfig | 1 -
arch/arm/tools/syscall.tbl | 2 +-
arch/arm64/include/asm/unistd32.h | 4 +-
arch/ia64/kernel/syscalls/syscall.tbl | 2 +-
arch/m68k/kernel/syscalls/syscall.tbl | 2 +-
arch/microblaze/kernel/syscalls/syscall.tbl | 2 +-
arch/mips/configs/cu1000-neo_defconfig | 1 -
arch/mips/kernel/syscalls/syscall_n32.tbl | 2 +-
arch/mips/kernel/syscalls/syscall_n64.tbl | 2 +-
arch/mips/kernel/syscalls/syscall_o32.tbl | 2 +-
arch/parisc/kernel/syscalls/syscall.tbl | 2 +-
arch/powerpc/kernel/syscalls/syscall.tbl | 2 +-
arch/s390/kernel/syscalls/syscall.tbl | 2 +-
arch/sh/configs/dreamcast_defconfig | 1 -
arch/sh/configs/espt_defconfig | 1 -
arch/sh/configs/hp6xx_defconfig | 1 -
arch/sh/configs/landisk_defconfig | 1 -
arch/sh/configs/lboxre2_defconfig | 1 -
arch/sh/configs/microdev_defconfig | 1 -
arch/sh/configs/migor_defconfig | 1 -
arch/sh/configs/r7780mp_defconfig | 1 -
arch/sh/configs/r7785rp_defconfig | 1 -
arch/sh/configs/rts7751r2d1_defconfig | 1 -
arch/sh/configs/rts7751r2dplus_defconfig | 1 -
arch/sh/configs/se7206_defconfig | 1 -
arch/sh/configs/se7343_defconfig | 1 -
arch/sh/configs/se7619_defconfig | 1 -
arch/sh/configs/se7705_defconfig | 1 -
arch/sh/configs/se7750_defconfig | 1 -
arch/sh/configs/se7751_defconfig | 1 -
arch/sh/configs/secureedge5410_defconfig | 1 -
arch/sh/configs/sh03_defconfig | 1 -
arch/sh/configs/sh7710voipgw_defconfig | 1 -
arch/sh/configs/sh7757lcr_defconfig | 1 -
arch/sh/configs/sh7763rdp_defconfig | 1 -
arch/sh/configs/shmin_defconfig | 1 -
arch/sh/configs/titan_defconfig | 1 -
arch/sh/kernel/syscalls/syscall.tbl | 2 +-
arch/sparc/kernel/syscalls/syscall.tbl | 2 +-
arch/x86/entry/syscalls/syscall_32.tbl | 2 +-
arch/x86/entry/syscalls/syscall_64.tbl | 2 +-
arch/xtensa/kernel/syscalls/syscall.tbl | 2 +-
include/linux/compat.h | 1 -
include/linux/syscalls.h | 2 -
include/linux/sysctl.h | 6 +-
kernel/Makefile | 2 +-
kernel/sys_ni.c | 1 -
kernel/sysctl_binary.c | 171 ------------------
.../arch/powerpc/entry/syscalls/syscall.tbl | 2 +-
.../perf/arch/s390/entry/syscalls/syscall.tbl | 2 +-
.../arch/x86/entry/syscalls/syscall_64.tbl | 2 +-
52 files changed, 24 insertions(+), 227 deletions(-)
delete mode 100644 kernel/sysctl_binary.c
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index b249824c8267..0da7f1c61529 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -249,7 +249,7 @@
316 common mlockall sys_mlockall
317 common munlockall sys_munlockall
318 common sysinfo sys_sysinfo
-319 common _sysctl sys_sysctl
+319 common _sysctl sys_ni_syscall
# 320 was sys_idle
321 common oldumount sys_oldumount
322 common swapon sys_swapon
diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig
index f56ac394caf1..4e49d6cb2f62 100644
--- a/arch/arm/configs/am200epdkit_defconfig
+++ b/arch/arm/configs/am200epdkit_defconfig
@@ -3,7 +3,6 @@ CONFIG_LOCALVERSION="gum"
CONFIG_SYSVIPC=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_EPOLL is not set
# CONFIG_SHMEM is not set
# CONFIG_VM_EVENT_COUNTERS is not set
diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl
index 7b3832d920ee..f36fda68fbe0 100644
--- a/arch/arm/tools/syscall.tbl
+++ b/arch/arm/tools/syscall.tbl
@@ -162,7 +162,7 @@
146 common writev sys_writev
147 common getsid sys_getsid
148 common fdatasync sys_fdatasync
-149 common _sysctl sys_sysctl
+149 common _sysctl sys_ni_syscall
150 common mlock sys_mlock
151 common munlock sys_munlock
152 common mlockall sys_mlockall
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index f8dafe900cb9..ca41bb747e9d 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -308,8 +308,8 @@ __SYSCALL(__NR_writev, compat_sys_writev)
__SYSCALL(__NR_getsid, sys_getsid)
#define __NR_fdatasync 148
__SYSCALL(__NR_fdatasync, sys_fdatasync)
-#define __NR__sysctl 149
-__SYSCALL(__NR__sysctl, compat_sys_sysctl)
+ /* 149 was sys_sysctl */
+__SYSCALL(149, sys_ni_syscall)
#define __NR_mlock 150
__SYSCALL(__NR_mlock, sys_mlock)
#define __NR_munlock 151
diff --git a/arch/ia64/kernel/syscalls/syscall.tbl b/arch/ia64/kernel/syscalls/syscall.tbl
index 6636a1aef36b..75b880b8516f 100644
--- a/arch/ia64/kernel/syscalls/syscall.tbl
+++ b/arch/ia64/kernel/syscalls/syscall.tbl
@@ -135,7 +135,7 @@
123 common writev sys_writev
124 common pread64 sys_pread64
125 common pwrite64 sys_pwrite64
-126 common _sysctl sys_sysctl
+126 common _sysctl sys_ni_syscall
127 common mmap sys_mmap
128 common munmap sys_munmap
129 common mlock sys_mlock
diff --git a/arch/m68k/kernel/syscalls/syscall.tbl b/arch/m68k/kernel/syscalls/syscall.tbl
index 8cd84a7fbf57..91b21ad18d2d 100644
--- a/arch/m68k/kernel/syscalls/syscall.tbl
+++ b/arch/m68k/kernel/syscalls/syscall.tbl
@@ -156,7 +156,7 @@
146 common writev sys_writev
147 common getsid sys_getsid
148 common fdatasync sys_fdatasync
-149 common _sysctl sys_sysctl
+149 common _sysctl sys_ni_syscall
150 common mlock sys_mlock
151 common munlock sys_munlock
152 common mlockall sys_mlockall
diff --git a/arch/microblaze/kernel/syscalls/syscall.tbl b/arch/microblaze/kernel/syscalls/syscall.tbl
index f581a02257ec..dc5f9fb0dac1 100644
--- a/arch/microblaze/kernel/syscalls/syscall.tbl
+++ b/arch/microblaze/kernel/syscalls/syscall.tbl
@@ -156,7 +156,7 @@
146 common writev sys_writev
147 common getsid sys_getsid
148 common fdatasync sys_fdatasync
-149 common _sysctl sys_sysctl
+149 common _sysctl sys_ni_syscall
150 common mlock sys_mlock
151 common munlock sys_munlock
152 common mlockall sys_mlockall
diff --git a/arch/mips/configs/cu1000-neo_defconfig b/arch/mips/configs/cu1000-neo_defconfig
index 9b05a8fdabe1..244654ce7e7c 100644
--- a/arch/mips/configs/cu1000-neo_defconfig
+++ b/arch/mips/configs/cu1000-neo_defconfig
@@ -17,7 +17,6 @@ CONFIG_CGROUP_CPUACCT=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl
index c85bdc3abe55..2653b28167ba 100644
--- a/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -159,7 +159,7 @@
149 n32 munlockall sys_munlockall
150 n32 vhangup sys_vhangup
151 n32 pivot_root sys_pivot_root
-152 n32 _sysctl compat_sys_sysctl
+152 n32 _sysctl sys_ni_syscall
153 n32 prctl sys_prctl
154 n32 adjtimex sys_adjtimex_time32
155 n32 setrlimit compat_sys_setrlimit
diff --git a/arch/mips/kernel/syscalls/syscall_n64.tbl b/arch/mips/kernel/syscalls/syscall_n64.tbl
index 9e08c40d3cb9..a4fd3bfc840f 100644
--- a/arch/mips/kernel/syscalls/syscall_n64.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n64.tbl
@@ -159,7 +159,7 @@
149 n64 munlockall sys_munlockall
150 n64 vhangup sys_vhangup
151 n64 pivot_root sys_pivot_root
-152 n64 _sysctl sys_sysctl
+152 n64 _sysctl sys_ni_syscall
153 n64 prctl sys_prctl
154 n64 adjtimex sys_adjtimex
155 n64 setrlimit sys_setrlimit
diff --git a/arch/mips/kernel/syscalls/syscall_o32.tbl b/arch/mips/kernel/syscalls/syscall_o32.tbl
index a2b591d7c874..a30cfd414147 100644
--- a/arch/mips/kernel/syscalls/syscall_o32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_o32.tbl
@@ -164,7 +164,7 @@
150 o32 unused150 sys_ni_syscall
151 o32 getsid sys_getsid
152 o32 fdatasync sys_fdatasync
-153 o32 _sysctl sys_sysctl compat_sys_sysctl
+153 o32 _sysctl sys_ni_syscall
154 o32 mlock sys_mlock
155 o32 munlock sys_munlock
156 o32 mlockall sys_mlockall
diff --git a/arch/parisc/kernel/syscalls/syscall.tbl b/arch/parisc/kernel/syscalls/syscall.tbl
index 98e7442e4d7a..a47bc1906be5 100644
--- a/arch/parisc/kernel/syscalls/syscall.tbl
+++ b/arch/parisc/kernel/syscalls/syscall.tbl
@@ -163,7 +163,7 @@
146 common writev sys_writev compat_sys_writev
147 common getsid sys_getsid
148 common fdatasync sys_fdatasync
-149 common _sysctl sys_sysctl compat_sys_sysctl
+149 common _sysctl sys_ni_syscall
150 common mlock sys_mlock
151 common munlock sys_munlock
152 common mlockall sys_mlockall
diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl
index 72fb9dd88e16..a60163f22d89 100644
--- a/arch/powerpc/kernel/syscalls/syscall.tbl
+++ b/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -197,7 +197,7 @@
146 common writev sys_writev compat_sys_writev
147 common getsid sys_getsid
148 common fdatasync sys_fdatasync
-149 nospu _sysctl sys_sysctl compat_sys_sysctl
+149 nospu _sysctl sys_ni_syscall
150 common mlock sys_mlock
151 common munlock sys_munlock
152 common mlockall sys_mlockall
diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl
index b731fcb03f1b..f17aaf6fe5de 100644
--- a/arch/s390/kernel/syscalls/syscall.tbl
+++ b/arch/s390/kernel/syscalls/syscall.tbl
@@ -138,7 +138,7 @@
146 common writev sys_writev compat_sys_writev
147 common getsid sys_getsid sys_getsid
148 common fdatasync sys_fdatasync sys_fdatasync
-149 common _sysctl sys_sysctl compat_sys_sysctl
+149 common _sysctl sys_ni_syscall
150 common mlock sys_mlock sys_mlock
151 common munlock sys_munlock sys_munlock
152 common mlockall sys_mlockall sys_mlockall
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index ae067e0b15e3..6a82c7b8ff32 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,7 +1,6 @@
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_MODULES=y
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
index a5b865a75d22..9a988c347e9d 100644
--- a/arch/sh/configs/espt_defconfig
+++ b/arch/sh/configs/espt_defconfig
@@ -5,7 +5,6 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index a92db6694ce2..70e6605d7f7e 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -3,7 +3,6 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CPU_SUBTYPE_SH7709=y
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 567af752b1bb..ba6ec042606f 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,6 +1,5 @@
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_SLAB=y
CONFIG_MODULES=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index 10f6d371ce2c..05e4ac6fed5f 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,6 +1,5 @@
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_SLAB=y
CONFIG_MODULES=y
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index ed84d1303acf..c65667d00313 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -2,7 +2,6 @@ CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CPU_SUBTYPE_SH4_202=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 494a1675c226..dec9316f65d5 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -4,7 +4,6 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index c97ec60cff27..e922659fdadb 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -3,7 +3,6 @@ CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
CONFIG_SLAB=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 55fce65eb454..5978866358ec 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -7,7 +7,6 @@ CONFIG_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 6a3cfe08295f..fc9c22152b08 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,7 +1,6 @@
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 2b3d7d280672..ff3fd6787fd6 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,7 +1,6 @@
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 21a43f14ffac..ff5bb4489922 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -18,7 +18,6 @@ CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS_ALL=y
# CONFIG_ELF_CORE is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 4e794e719a28..5d6c19338ebf 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -2,7 +2,6 @@
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SHMEM is not set
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 3264415a5931..71a672c30716 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,7 +1,6 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
# CONFIG_ELF_CORE is not set
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index 4496b94b7d88..ed00a6eeadf5 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -2,7 +2,6 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_SLAB=y
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index b23f67542728..3f1c13799d79 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -5,7 +5,6 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_HOTPLUG is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index 162343683937..4a024065bb75 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -3,7 +3,6 @@ CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_HOTPLUG is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
diff --git a/arch/sh/configs/secureedge5410_defconfig b/arch/sh/configs/secureedge5410_defconfig
index 360592d63a2f..8422599cfb04 100644
--- a/arch/sh/configs/secureedge5410_defconfig
+++ b/arch/sh/configs/secureedge5410_defconfig
@@ -1,7 +1,6 @@
# CONFIG_SWAP is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_HOTPLUG is not set
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 87db9a84b5ec..f0073ed39947 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -3,7 +3,6 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index 08426913c0e3..0d814770b07f 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -2,7 +2,6 @@
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SHMEM is not set
diff --git a/arch/sh/configs/sh7757lcr_defconfig b/arch/sh/configs/sh7757lcr_defconfig
index d0933a9b9799..a2700ab165af 100644
--- a/arch/sh/configs/sh7757lcr_defconfig
+++ b/arch/sh/configs/sh7757lcr_defconfig
@@ -8,7 +8,6 @@ CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_SLAB=y
CONFIG_MODULES=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index d0a0aa74cecf..26c5fd02c87a 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -5,7 +5,6 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index a27b129b93c5..c0b6f40d01cc 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -1,7 +1,6 @@
# CONFIG_SWAP is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
# CONFIG_BUG is not set
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index 4ec961ace688..ba887f1351be 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -6,7 +6,6 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl
index e7a4804e23cf..745684512d5b 100644
--- a/arch/sh/kernel/syscalls/syscall.tbl
+++ b/arch/sh/kernel/syscalls/syscall.tbl
@@ -156,7 +156,7 @@
146 common writev sys_writev
147 common getsid sys_getsid
148 common fdatasync sys_fdatasync
-149 common _sysctl sys_sysctl
+149 common _sysctl sys_ni_syscall
150 common mlock sys_mlock
151 common munlock sys_munlock
152 common mlockall sys_mlockall
diff --git a/arch/sparc/kernel/syscalls/syscall.tbl b/arch/sparc/kernel/syscalls/syscall.tbl
index d6126ee2f51d..74adaeca2d89 100644
--- a/arch/sparc/kernel/syscalls/syscall.tbl
+++ b/arch/sparc/kernel/syscalls/syscall.tbl
@@ -300,7 +300,7 @@
249 64 nanosleep sys_nanosleep
250 32 mremap sys_mremap
250 64 mremap sys_64_mremap
-251 common _sysctl sys_sysctl compat_sys_sysctl
+251 common _sysctl sys_ni_syscall
252 common getsid sys_getsid
253 common fdatasync sys_fdatasync
254 32 nfsservctl sys_ni_syscall sys_nis_syscall
diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index 686d59df1e12..ef76360bc5e9 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -160,7 +160,7 @@
146 i386 writev sys_writev compat_sys_writev
147 i386 getsid sys_getsid
148 i386 fdatasync sys_fdatasync
-149 i386 _sysctl sys_sysctl compat_sys_sysctl
+149 i386 _sysctl sys_ni_syscall
150 i386 mlock sys_mlock
151 i386 munlock sys_munlock
152 i386 mlockall sys_mlockall
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index b345b35b3308..6a3b0b3ffbaa 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -164,7 +164,7 @@
153 common vhangup sys_vhangup
154 common modify_ldt sys_modify_ldt
155 common pivot_root sys_pivot_root
-156 64 _sysctl sys_sysctl
+156 64 _sysctl sys_ni_syscall
157 common prctl sys_prctl
158 common arch_prctl sys_arch_prctl
159 common adjtimex sys_adjtimex
diff --git a/arch/xtensa/kernel/syscalls/syscall.tbl b/arch/xtensa/kernel/syscalls/syscall.tbl
index 96cb07095e4c..34cbbf52d670 100644
--- a/arch/xtensa/kernel/syscalls/syscall.tbl
+++ b/arch/xtensa/kernel/syscalls/syscall.tbl
@@ -222,7 +222,7 @@
204 common quotactl sys_quotactl
# 205 was old nfsservctl
205 common nfsservctl sys_ni_syscall
-206 common _sysctl sys_sysctl
+206 common _sysctl sys_ni_syscall
207 common bdflush sys_bdflush
208 common uname sys_newuname
209 common sysinfo sys_sysinfo
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 86b61e873947..c55d2459809d 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -859,7 +859,6 @@ asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp,
asmlinkage long compat_sys_ustat(unsigned dev, struct compat_ustat __user *u32);
asmlinkage long compat_sys_recv(int fd, void __user *buf, compat_size_t len,
unsigned flags);
-asmlinkage long compat_sys_sysctl(struct compat_sysctl_args __user *args);
/* obsolete: fs/readdir.c */
asmlinkage long compat_sys_old_readdir(unsigned int fd,
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 63ffa6dc9da3..915233a188e1 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -48,7 +48,6 @@ struct statfs;
struct statfs64;
struct statx;
struct fsinfo_params;
-struct __sysctl_args;
struct sysinfo;
struct timespec;
struct __kernel_old_timeval;
@@ -1125,7 +1124,6 @@ asmlinkage long sys_send(int, void __user *, size_t, unsigned);
asmlinkage long sys_bdflush(int func, long data);
asmlinkage long sys_oldumount(char __user *name);
asmlinkage long sys_uselib(const char __user *library);
-asmlinkage long sys_sysctl(struct __sysctl_args __user *args);
asmlinkage long sys_sysfs(int option,
unsigned long arg1, unsigned long arg2);
asmlinkage long sys_fork(void);
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 50bb7f383a1b..51298a4f4623 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -74,15 +74,13 @@ int proc_do_static_key(struct ctl_table *table, int write, void *buffer,
* sysctl names can be mirrored automatically under /proc/sys. The
* procname supplied controls /proc naming.
*
- * The table's mode will be honoured both for sys_sysctl(2) and
- * proc-fs access.
+ * The table's mode will be honoured for proc-fs access.
*
* Leaf nodes in the sysctl tree will be represented by a single file
* under /proc; non-leaf nodes will be represented by directories. A
* null procname disables /proc mirroring at this node.
*
- * sysctl(2) can automatically manage read and write requests through
- * the sysctl table. The data and maxlen fields of the ctl_table
+ * The data and maxlen fields of the ctl_table
* struct enable minimal validation of the values being written to be
* performed, and the mode field allows minimal authentication.
*
diff --git a/kernel/Makefile b/kernel/Makefile
index f3218bc5ec69..d13e01b0e07e 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -5,7 +5,7 @@
obj-y = fork.o exec_domain.o panic.o \
cpu.o exit.o softirq.o resource.o \
- sysctl.o sysctl_binary.o capability.o ptrace.o user.o \
+ sysctl.o capability.o ptrace.o user.o \
signal.o sys.o umh.o workqueue.o pid.o task_work.o \
extable.o params.o \
kthread.o sys_ni.o nsproxy.o \
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index fad48ace1123..c935c1819ba3 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -373,7 +373,6 @@ COND_SYSCALL(socketcall);
COND_SYSCALL_COMPAT(socketcall);
/* compat syscalls for arm64, x86, ... */
-COND_SYSCALL_COMPAT(sysctl);
COND_SYSCALL_COMPAT(fanotify_mark);
/* x86 */
diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c
deleted file mode 100644
index 7d550cc76a3b..000000000000
--- a/kernel/sysctl_binary.c
+++ /dev/null
@@ -1,171 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/stat.h>
-#include <linux/sysctl.h>
-#include "../fs/xfs/xfs_sysctl.h"
-#include <linux/sunrpc/debug.h>
-#include <linux/string.h>
-#include <linux/syscalls.h>
-#include <linux/namei.h>
-#include <linux/mount.h>
-#include <linux/fs.h>
-#include <linux/nsproxy.h>
-#include <linux/pid_namespace.h>
-#include <linux/file.h>
-#include <linux/ctype.h>
-#include <linux/netdevice.h>
-#include <linux/kernel.h>
-#include <linux/uuid.h>
-#include <linux/slab.h>
-#include <linux/compat.h>
-
-static ssize_t binary_sysctl(const int *name, int nlen,
- void __user *oldval, size_t oldlen, void __user *newval, size_t newlen)
-{
- return -ENOSYS;
-}
-
-static void deprecated_sysctl_warning(const int *name, int nlen)
-{
- int i;
-
- /*
- * CTL_KERN/KERN_VERSION is used by older glibc and cannot
- * ever go away.
- */
- if (nlen >= 2 && name[0] == CTL_KERN && name[1] == KERN_VERSION)
- return;
-
- if (printk_ratelimit()) {
- printk(KERN_INFO
- "warning: process `%s' used the deprecated sysctl "
- "system call with ", current->comm);
- for (i = 0; i < nlen; i++)
- printk(KERN_CONT "%d.", name[i]);
- printk(KERN_CONT "\n");
- }
- return;
-}
-
-#define WARN_ONCE_HASH_BITS 8
-#define WARN_ONCE_HASH_SIZE (1<<WARN_ONCE_HASH_BITS)
-
-static DECLARE_BITMAP(warn_once_bitmap, WARN_ONCE_HASH_SIZE);
-
-#define FNV32_OFFSET 2166136261U
-#define FNV32_PRIME 0x01000193
-
-/*
- * Print each legacy sysctl (approximately) only once.
- * To avoid making the tables non-const use a external
- * hash-table instead.
- * Worst case hash collision: 6, but very rarely.
- * NOTE! We don't use the SMP-safe bit tests. We simply
- * don't care enough.
- */
-static void warn_on_bintable(const int *name, int nlen)
-{
- int i;
- u32 hash = FNV32_OFFSET;
-
- for (i = 0; i < nlen; i++)
- hash = (hash ^ name[i]) * FNV32_PRIME;
- hash %= WARN_ONCE_HASH_SIZE;
- if (__test_and_set_bit(hash, warn_once_bitmap))
- return;
- deprecated_sysctl_warning(name, nlen);
-}
-
-static ssize_t do_sysctl(int __user *args_name, int nlen,
- void __user *oldval, size_t oldlen, void __user *newval, size_t newlen)
-{
- int name[CTL_MAXNAME];
- int i;
-
- /* Check args->nlen. */
- if (nlen < 0 || nlen > CTL_MAXNAME)
- return -ENOTDIR;
- /* Read in the sysctl name for simplicity */
- for (i = 0; i < nlen; i++)
- if (get_user(name[i], args_name + i))
- return -EFAULT;
-
- warn_on_bintable(name, nlen);
-
- return binary_sysctl(name, nlen, oldval, oldlen, newval, newlen);
-}
-
-SYSCALL_DEFINE1(sysctl, struct __sysctl_args __user *, args)
-{
- struct __sysctl_args tmp;
- size_t oldlen = 0;
- ssize_t result;
-
- if (copy_from_user(&tmp, args, sizeof(tmp)))
- return -EFAULT;
-
- if (tmp.oldval && !tmp.oldlenp)
- return -EFAULT;
-
- if (tmp.oldlenp && get_user(oldlen, tmp.oldlenp))
- return -EFAULT;
-
- result = do_sysctl(tmp.name, tmp.nlen, tmp.oldval, oldlen,
- tmp.newval, tmp.newlen);
-
- if (result >= 0) {
- oldlen = result;
- result = 0;
- }
-
- if (tmp.oldlenp && put_user(oldlen, tmp.oldlenp))
- return -EFAULT;
-
- return result;
-}
-
-
-#ifdef CONFIG_COMPAT
-
-struct compat_sysctl_args {
- compat_uptr_t name;
- int nlen;
- compat_uptr_t oldval;
- compat_uptr_t oldlenp;
- compat_uptr_t newval;
- compat_size_t newlen;
- compat_ulong_t __unused[4];
-};
-
-COMPAT_SYSCALL_DEFINE1(sysctl, struct compat_sysctl_args __user *, args)
-{
- struct compat_sysctl_args tmp;
- compat_size_t __user *compat_oldlenp;
- size_t oldlen = 0;
- ssize_t result;
-
- if (copy_from_user(&tmp, args, sizeof(tmp)))
- return -EFAULT;
-
- if (tmp.oldval && !tmp.oldlenp)
- return -EFAULT;
-
- compat_oldlenp = compat_ptr(tmp.oldlenp);
- if (compat_oldlenp && get_user(oldlen, compat_oldlenp))
- return -EFAULT;
-
- result = do_sysctl(compat_ptr(tmp.name), tmp.nlen,
- compat_ptr(tmp.oldval), oldlen,
- compat_ptr(tmp.newval), tmp.newlen);
-
- if (result >= 0) {
- oldlen = result;
- result = 0;
- }
-
- if (compat_oldlenp && put_user(oldlen, compat_oldlenp))
- return -EFAULT;
-
- return result;
-}
-
-#endif /* CONFIG_COMPAT */
diff --git a/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl b/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl
index 35b61bfc1b1a..6d29d9a6bc60 100644
--- a/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl
+++ b/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl
@@ -193,7 +193,7 @@
146 common writev sys_writev compat_sys_writev
147 common getsid sys_getsid
148 common fdatasync sys_fdatasync
-149 nospu _sysctl sys_sysctl compat_sys_sysctl
+149 nospu _sysctl sys_ni_syscall
150 common mlock sys_mlock
151 common munlock sys_munlock
152 common mlockall sys_mlockall
diff --git a/tools/perf/arch/s390/entry/syscalls/syscall.tbl b/tools/perf/arch/s390/entry/syscalls/syscall.tbl
index b38d48464368..0193f9b98753 100644
--- a/tools/perf/arch/s390/entry/syscalls/syscall.tbl
+++ b/tools/perf/arch/s390/entry/syscalls/syscall.tbl
@@ -138,7 +138,7 @@
146 common writev sys_writev compat_sys_writev
147 common getsid sys_getsid sys_getsid
148 common fdatasync sys_fdatasync sys_fdatasync
-149 common _sysctl sys_sysctl compat_sys_sysctl
+149 common _sysctl sys_ni_syscall
150 common mlock sys_mlock compat_sys_mlock
151 common munlock sys_munlock compat_sys_munlock
152 common mlockall sys_mlockall sys_mlockall
diff --git a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
index 37b844f839bc..4e5006256193 100644
--- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
@@ -164,7 +164,7 @@
153 common vhangup sys_vhangup
154 common modify_ldt sys_modify_ldt
155 common pivot_root sys_pivot_root
-156 64 _sysctl sys_sysctl
+156 64 _sysctl sys_ni_syscall
157 common prctl sys_prctl
158 common arch_prctl sys_arch_prctl
159 common adjtimex sys_adjtimex
--
2.27.0
^ permalink raw reply related
* Re: [PATCH 2/2] cpufreq: Specify default governor on command line
From: Viresh Kumar @ 2020-06-16 4:31 UTC (permalink / raw)
To: Quentin Perret
Cc: juri.lelli, kernel-team, vincent.guittot, arnd, rafael, peterz,
adharmap, linux-pm, rjw, linux-kernel, mingo, paulus,
linuxppc-dev, tkjos
In-Reply-To: <20200615165554.228063-3-qperret@google.com>
On 15-06-20, 17:55, Quentin Perret wrote:
> +static void cpufreq_get_default_governor(void)
> +{
> + default_governor = cpufreq_parse_governor(cpufreq_param_governor);
> + if (!default_governor) {
> + if (*cpufreq_param_governor)
> + pr_warn("Failed to find %s\n", cpufreq_param_governor);
> + default_governor = cpufreq_default_governor();
A module_get() never happened for this case and so maybe a
module_put() should never get called.
> + }
> +}
> +
> +static void cpufreq_put_default_governor(void)
> +{
> + if (!default_governor)
> + return;
> + module_put(default_governor->owner);
> + default_governor = NULL;
> +}
> +
> static int cpufreq_init_governor(struct cpufreq_policy *policy)
> {
> int ret;
> @@ -2701,6 +2721,8 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
>
> if (driver_data->setpolicy)
> driver_data->flags |= CPUFREQ_CONST_LOOPS;
> + else
> + cpufreq_get_default_governor();
>
> if (cpufreq_boost_supported()) {
> ret = create_boost_sysfs_file();
> @@ -2769,6 +2791,7 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver)
> subsys_interface_unregister(&cpufreq_interface);
> remove_boost_sysfs_file();
> cpuhp_remove_state_nocalls_cpuslocked(hp_online);
> + cpufreq_put_default_governor();
>
> write_lock_irqsave(&cpufreq_driver_lock, flags);
>
> @@ -2792,4 +2815,5 @@ static int __init cpufreq_core_init(void)
> return 0;
> }
And since this is a per boot thing, there is perhaps no need of doing
these at driver register/unregister, I would rather do it at:
cpufreq_core_init() time itself and so we will never need to run
cpufreq_put_default_governor() and so can be removed.
And another thing I am not able to understand (despite you commenting
about that in the commit log) is what happens if the default governor
chosen is built as a module ?
--
viresh
^ permalink raw reply
* Re: [PATCH 1/2] cpufreq: Register governors at core_initcall
From: Viresh Kumar @ 2020-06-16 4:28 UTC (permalink / raw)
To: Quentin Perret
Cc: juri.lelli, kernel-team, vincent.guittot, arnd, rafael, peterz,
adharmap, linux-pm, rjw, linux-kernel, mingo, paulus,
linuxppc-dev, tkjos
In-Reply-To: <20200615165554.228063-2-qperret@google.com>
On 15-06-20, 17:55, Quentin Perret wrote:
> Currently, most CPUFreq governors are registered at core_initcall time
> when used as default, and module_init otherwise. In preparation for
> letting users specify the default governor on the kernel command line,
> change all of them to use core_initcall unconditionally, as is already
> the case for schedutil and performance. This will enable us to assume
> builtin governors have been registered before the builtin CPUFreq
> drivers probe.
>
> And since all governors now have similar init/exit patterns, introduce
> two new macros cpufreq_governor_{init,exit}() to factorize the code.
>
> Signed-off-by: Quentin Perret <qperret@google.com>
> ---
> Note: I couldn't boot-test the change to spudemand, by lack of hardware.
> But I can confirm cell_defconfig compiles just fine.
> ---
> .../platforms/cell/cpufreq_spudemand.c | 26 ++-----------------
> drivers/cpufreq/cpufreq_conservative.c | 22 ++++------------
> drivers/cpufreq/cpufreq_ondemand.c | 24 +++++------------
> drivers/cpufreq/cpufreq_performance.c | 14 ++--------
> drivers/cpufreq/cpufreq_powersave.c | 18 +++----------
> drivers/cpufreq/cpufreq_userspace.c | 18 +++----------
> include/linux/cpufreq.h | 14 ++++++++++
> kernel/sched/cpufreq_schedutil.c | 6 +----
> 8 files changed, 36 insertions(+), 106 deletions(-)
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
^ permalink raw reply
* Re: [PATCH 00/17] spelling.txt: /decriptors/descriptors/
From: Martin K. Petersen @ 2020-06-16 3:59 UTC (permalink / raw)
To: Kieran Bingham, Kieran Bingham
Cc: linux-scsi, Martin K . Petersen, linux-pm, linux-rdma, netdev,
linux-gpio, linux-usb, linux-wireless, linux-kernel, dri-devel,
virtualization, linux-renesas-soc, linux-mm, linux-mtd, ath10k,
linux-input, linuxppc-dev, linux-arm-kernel
In-Reply-To: <20200609124610.3445662-1-kieran.bingham+renesas@ideasonboard.com>
On Tue, 9 Jun 2020 13:45:53 +0100, Kieran Bingham wrote:
> I wouldn't normally go through spelling fixes, but I caught sight of
> this typo twice, and then foolishly grepped the tree for it, and saw how
> pervasive it was.
>
> so here I am ... fixing a typo globally... but with an addition in
> scripts/spelling.txt so it shouldn't re-appear ;-)
>
> [...]
Applied to 5.9/scsi-queue, thanks!
[06/17] scsi: Fix trivial spelling
https://git.kernel.org/mkp/scsi/c/0a19a725c0ed
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply
* Re: [PATCH v4 1/3] mm/slab: Use memzero_explicit() in kzfree()
From: Eric Biggers @ 2020-06-16 3:30 UTC (permalink / raw)
To: Waiman Long
Cc: Jason A . Donenfeld, Michal Hocko, linux-btrfs, Jarkko Sakkinen,
David Sterba, David Howells, linux-mm, linux-sctp, keyrings,
kasan-dev, linux-stm32, devel, linux-cifs, linux-scsi,
James Morris, Matthew Wilcox, linux-wpan, David Rientjes,
Dan Carpenter, Serge E. Hallyn, linux-pm, ecryptfs, linux-fscrypt,
linux-mediatek, linux-amlogic, virtualization, linux-integrity,
linux-nfs, linuxppc-dev, linux-wireless, linux-kernel, stable,
linux-bluetooth, linux-security-module, target-devel,
tipc-discussion, linux-crypto, Johannes Weiner, Joe Perches,
Andrew Morton, Linus Torvalds, netdev, wireguard, linux-ppp
In-Reply-To: <20200616015718.7812-2-longman@redhat.com>
On Mon, Jun 15, 2020 at 09:57:16PM -0400, Waiman Long wrote:
> The kzfree() function is normally used to clear some sensitive
> information, like encryption keys, in the buffer before freeing it back
> to the pool. Memset() is currently used for the buffer clearing. However,
> it is entirely possible that the compiler may choose to optimize away the
> memory clearing especially if LTO is being used. To make sure that this
> optimization will not happen, memzero_explicit(), which is introduced
> in v3.18, is now used in kzfree() to do the clearing.
>
> Fixes: 3ef0e5ba4673 ("slab: introduce kzfree()")
> Cc: stable@vger.kernel.org
> Signed-off-by: Waiman Long <longman@redhat.com>
> ---
> mm/slab_common.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/mm/slab_common.c b/mm/slab_common.c
> index 9e72ba224175..37d48a56431d 100644
> --- a/mm/slab_common.c
> +++ b/mm/slab_common.c
> @@ -1726,7 +1726,7 @@ void kzfree(const void *p)
> if (unlikely(ZERO_OR_NULL_PTR(mem)))
> return;
> ks = ksize(mem);
> - memset(mem, 0, ks);
> + memzero_explicit(mem, ks);
> kfree(mem);
> }
> EXPORT_SYMBOL(kzfree);
This is a good change, but the commit message isn't really accurate. AFAIK, no
one has found any case where this memset() gets optimized out. And even with
LTO, it would be virtually impossible due to all the synchronization and global
data structures that kfree() uses. (Remember that this isn't the C standard
function "free()", so the compiler can't assign it any special meaning.)
Not to mention that LTO support isn't actually upstream yet.
I still agree with the change, but it might be helpful if the commit message
were honest that this is really a hardening measure and about properly conveying
the intent. As-is this sounds like a critical fix, which might confuse people.
- Eric
^ permalink raw reply
* Re: [PATCH] kbuild: reuse vmlinux.o in vmlinux_link
From: Masahiro Yamada @ 2020-06-16 3:22 UTC (permalink / raw)
To: Sami Tolvanen
Cc: Michal Marek, Kees Cook, Sam Ravnborg, Linux Kbuild mailing list,
Linux Kernel Mailing List, Nicholas Piggin, linuxppc-dev
In-Reply-To: <CABCJKufaMU1z-s4S+dHhg0iCyVynLGwsFJgYnYyiBaR=mZt-8w@mail.gmail.com>
On Tue, Jun 16, 2020 at 6:47 AM Sami Tolvanen <samitolvanen@google.com> wrote:
>
> On Sat, May 23, 2020 at 8:13 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
> >
> > Hi Nicholas,
> > (+CC: Sam Ravnborg)
> >
> >
> > On Sat, May 23, 2020 at 7:06 PM Nicholas Piggin <npiggin@gmail.com> wrote:
> > >
> > > Excerpts from Masahiro Yamada's message of May 23, 2020 3:44 am:
> > > > + Michael, and PPC ML.
> > > >
> > > > They may know something about the reason of failure.
> > >
> > > Because the linker can't put branch stubs within object code sections,
> > > so when you incrementally link them too large, the linker can't resolve
> > > branches into other object files.
> >
> >
> > Ah, you are right.
> >
> > So, this is a problem not only for PPC
> > but also for ARM (both 32 and 64 bit), etc.
> >
> > ARM needs to insert a veneer to jump far.
> >
> > Prior to thin archive, we could not compile
> > ARCH=arm allyesconfig because
> > drivers/built-in.o was too large.
> >
> > This patch gets us back to the too large
> > incremental object situation.
> >
> > With my quick compile-testing,
> > ARCH=arm allyesconfig
> > and ARCH=arm64 allyesconfig are broken.
>
> Thanks for looking into this! Clang doesn't appear to have this issue
> with LTO because it always enables both -ffunction-sections and
> -fdata-sections. I confirmed that -ffunction-sections also fixes arm64
> allyesconfig with this patch. While I'm fine with reusing vmlinux.o
> only with LTO, how would you feel about enabling -ffunction-sections
> in the kernel by default?
I am OK if it works.
Please do compile tests for some architectures.
(especially, ARCH=powerpc defconfig, and ARCH=arm(64) allyesconfig)
Thank you.
--
Best Regards
Masahiro Yamada
^ permalink raw reply
* [PATCH v3] ASoC: fsl_ssi: Fix bclk calculation for mono channel
From: Shengjiu Wang @ 2020-06-16 2:53 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, broonie, perex, tiwai,
alsa-devel
Cc: linuxppc-dev, linux-kernel
For mono channel, SSI will switch to Normal mode.
In Normal mode and Network mode, the Word Length Control bits
control the word length divider in clock generator, which is
different with I2S Master mode (the word length is fixed to
32bit), it should be the value of params_width(hw_params).
The condition "slots == 2" is not good for I2S Master mode,
because for Network mode and Normal mode, the slots can also
be 2. Then we need to use (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK)
to check if it is I2S Master mode.
So we refine the formula for mono channel, otherwise there
will be sound issue for S24_LE.
Fixes: b0a7043d5c2c ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
changes in v3
- update according to Nicolin's comments
changes in v2
- refine patch for Network mode and Normal mode.
sound/soc/fsl/fsl_ssi.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index bad89b0d129e..1a2fa7f18142 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -678,8 +678,9 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
struct regmap *regs = ssi->regs;
u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
unsigned long clkrate, baudrate, tmprate;
- unsigned int slots = params_channels(hw_params);
- unsigned int slot_width = 32;
+ unsigned int channels = params_channels(hw_params);
+ unsigned int slot_width = params_width(hw_params);
+ unsigned int slots = 2;
u64 sub, savesub = 100000;
unsigned int freq;
bool baudclk_is_used;
@@ -688,10 +689,14 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
/* Override slots and slot_width if being specifically set... */
if (ssi->slots)
slots = ssi->slots;
- /* ...but keep 32 bits if slots is 2 -- I2S Master mode */
- if (ssi->slot_width && slots != 2)
+ if (ssi->slot_width)
slot_width = ssi->slot_width;
+ /* ...but force 32 bits for stereo audio using I2S Master Mode */
+ if (channels == 2 &&
+ (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK) == SSI_SCR_I2S_MODE_MASTER)
+ slot_width = 32;
+
/* Generate bit clock based on the slot number and slot width */
freq = slots * slot_width * params_rate(hw_params);
--
2.21.0
^ permalink raw reply related
* Re: [PATCH v13 3/6] powerpc/papr_scm: Fetch nvdimm health information from PHYP
From: Ira Weiny @ 2020-06-16 2:23 UTC (permalink / raw)
To: Vaibhav Jain
Cc: Santosh Sivaraj, linux-nvdimm, linux-kernel, Steven Rostedt,
Oliver O'Halloran, Aneesh Kumar K . V, Dan Williams,
linuxppc-dev
In-Reply-To: <20200615124407.32596-4-vaibhav@linux.ibm.com>
On Mon, Jun 15, 2020 at 06:14:04PM +0530, Vaibhav Jain wrote:
> Implement support for fetching nvdimm health information via
> H_SCM_HEALTH hcall as documented in Ref[1]. The hcall returns a pair
> of 64-bit bitmap, bitwise-and of which is then stored in
> 'struct papr_scm_priv' and subsequently partially exposed to
> user-space via newly introduced dimm specific attribute
> 'papr/flags'. Since the hcall is costly, the health information is
> cached and only re-queried, 60s after the previous successful hcall.
>
> The patch also adds a documentation text describing flags reported by
> the the new sysfs attribute 'papr/flags' is also introduced at
> Documentation/ABI/testing/sysfs-bus-papr-pmem.
>
> [1] commit 58b278f568f0 ("powerpc: Provide initial documentation for
> PAPR hcalls")
>
> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
> Cc: Dan Williams <dan.j.williams@intel.com>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
> ---
> Changelog:
>
> v12..v13:
> * None
>
> v11..v12:
> * None
>
> v10..v11:
> * None
>
> v9..v10:
> * Removed an avoidable 'goto' in __drc_pmem_query_health. [ Ira ].
>
> Resend:
> * Added ack from Aneesh.
>
> v8..v9:
> * Rename some variables and defines to reduce usage of term SCM
> replacing it with PMEM [Dan Williams, Aneesh]
> * s/PAPR_SCM_DIMM/PAPR_PMEM/g
> * s/papr_scm_nd_attributes/papr_nd_attributes/g
> * s/papr_scm_nd_attribute_group/papr_nd_attribute_group/g
> * s/papr_scm_dimm_attr_groups/papr_nd_attribute_groups/g
> * Renamed file sysfs-bus-papr-scm to sysfs-bus-papr-pmem
>
> v7..v8:
> * Update type of variable 'rc' in __drc_pmem_query_health() and
> drc_pmem_query_health() to long and int respectively. [ Ira ]
> * Updated the patch description to s/64 bit Big Endian Number/64-bit
> bitmap/ [ Ira, Aneesh ].
>
> Resend:
> * None
>
> v6..v7 :
> * Used the exported buf_seq_printf() function to generate content for
> 'papr/flags'
> * Moved the PAPR_SCM_DIMM_* bit-flags macro definitions to papr_scm.c
> and removed the papr_scm.h file [Mpe]
> * Some minor consistency issued in sysfs-bus-papr-scm
> documentation. [Mpe]
> * s/dimm_mutex/health_mutex/g [Mpe]
> * Split drc_pmem_query_health() into two function one of which takes
> care of caching and locking. [Mpe]
> * Fixed a local copy creation of dimm health information using
> READ_ONCE(). [Mpe]
>
> v5..v6 :
> * Change the flags sysfs attribute from 'papr_flags' to 'papr/flags'
> [Dan Williams]
> * Include documentation for 'papr/flags' attr [Dan Williams]
> * Change flag 'save_fail' to 'flush_fail' [Dan Williams]
> * Caching of health bitmap to reduce expensive hcalls [Dan Williams]
> * Removed usage of PPC_BIT from 'papr-scm.h' header [Mpe]
> * Replaced two __be64 integers from papr_scm_priv to a single u64
> integer [Mpe]
> * Updated patch description to reflect the changes made in this
> version.
> * Removed avoidable usage of 'papr_scm_priv.dimm_mutex' from
> flags_show() [Dan Williams]
>
> v4..v5 :
> * None
>
> v3..v4 :
> * None
>
> v2..v3 :
> * Removed PAPR_SCM_DIMM_HEALTH_NON_CRITICAL as a condition for
> NVDIMM unarmed [Aneesh]
>
> v1..v2 :
> * New patch in the series.
> ---
> Documentation/ABI/testing/sysfs-bus-papr-pmem | 27 +++
> arch/powerpc/platforms/pseries/papr_scm.c | 168 +++++++++++++++++-
> 2 files changed, 193 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-papr-pmem
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem
> new file mode 100644
> index 000000000000..5b10d036a8d4
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem
> @@ -0,0 +1,27 @@
> +What: /sys/bus/nd/devices/nmemX/papr/flags
> +Date: Apr, 2020
> +KernelVersion: v5.8
> +Contact: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, linux-nvdimm@lists.01.org,
> +Description:
> + (RO) Report flags indicating various states of a
> + papr-pmem NVDIMM device. Each flag maps to a one or
> + more bits set in the dimm-health-bitmap retrieved in
> + response to H_SCM_HEALTH hcall. The details of the bit
> + flags returned in response to this hcall is available
> + at 'Documentation/powerpc/papr_hcalls.rst' . Below are
> + the flags reported in this sysfs file:
> +
> + * "not_armed" : Indicates that NVDIMM contents will not
> + survive a power cycle.
> + * "flush_fail" : Indicates that NVDIMM contents
> + couldn't be flushed during last
> + shut-down event.
> + * "restore_fail": Indicates that NVDIMM contents
> + couldn't be restored during NVDIMM
> + initialization.
> + * "encrypted" : NVDIMM contents are encrypted.
> + * "smart_notify": There is health event for the NVDIMM.
> + * "scrubbed" : Indicating that contents of the
> + NVDIMM have been scrubbed.
> + * "locked" : Indicating that NVDIMM contents cant
> + be modified until next power cycle.
> diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
> index f35592423380..0c091622b15e 100644
> --- a/arch/powerpc/platforms/pseries/papr_scm.c
> +++ b/arch/powerpc/platforms/pseries/papr_scm.c
> @@ -12,6 +12,7 @@
> #include <linux/libnvdimm.h>
> #include <linux/platform_device.h>
> #include <linux/delay.h>
> +#include <linux/seq_buf.h>
>
> #include <asm/plpar_wrappers.h>
>
> @@ -22,6 +23,44 @@
> (1ul << ND_CMD_GET_CONFIG_DATA) | \
> (1ul << ND_CMD_SET_CONFIG_DATA))
>
> +/* DIMM health bitmap bitmap indicators */
> +/* SCM device is unable to persist memory contents */
> +#define PAPR_PMEM_UNARMED (1ULL << (63 - 0))
> +/* SCM device failed to persist memory contents */
> +#define PAPR_PMEM_SHUTDOWN_DIRTY (1ULL << (63 - 1))
> +/* SCM device contents are persisted from previous IPL */
> +#define PAPR_PMEM_SHUTDOWN_CLEAN (1ULL << (63 - 2))
> +/* SCM device contents are not persisted from previous IPL */
> +#define PAPR_PMEM_EMPTY (1ULL << (63 - 3))
> +/* SCM device memory life remaining is critically low */
> +#define PAPR_PMEM_HEALTH_CRITICAL (1ULL << (63 - 4))
> +/* SCM device will be garded off next IPL due to failure */
> +#define PAPR_PMEM_HEALTH_FATAL (1ULL << (63 - 5))
> +/* SCM contents cannot persist due to current platform health status */
> +#define PAPR_PMEM_HEALTH_UNHEALTHY (1ULL << (63 - 6))
> +/* SCM device is unable to persist memory contents in certain conditions */
> +#define PAPR_PMEM_HEALTH_NON_CRITICAL (1ULL << (63 - 7))
> +/* SCM device is encrypted */
> +#define PAPR_PMEM_ENCRYPTED (1ULL << (63 - 8))
> +/* SCM device has been scrubbed and locked */
> +#define PAPR_PMEM_SCRUBBED_AND_LOCKED (1ULL << (63 - 9))
> +
> +/* Bits status indicators for health bitmap indicating unarmed dimm */
> +#define PAPR_PMEM_UNARMED_MASK (PAPR_PMEM_UNARMED | \
> + PAPR_PMEM_HEALTH_UNHEALTHY)
> +
> +/* Bits status indicators for health bitmap indicating unflushed dimm */
> +#define PAPR_PMEM_BAD_SHUTDOWN_MASK (PAPR_PMEM_SHUTDOWN_DIRTY)
> +
> +/* Bits status indicators for health bitmap indicating unrestored dimm */
> +#define PAPR_PMEM_BAD_RESTORE_MASK (PAPR_PMEM_EMPTY)
> +
> +/* Bit status indicators for smart event notification */
> +#define PAPR_PMEM_SMART_EVENT_MASK (PAPR_PMEM_HEALTH_CRITICAL | \
> + PAPR_PMEM_HEALTH_FATAL | \
> + PAPR_PMEM_HEALTH_UNHEALTHY)
> +
> +/* private struct associated with each region */
> struct papr_scm_priv {
> struct platform_device *pdev;
> struct device_node *dn;
> @@ -39,6 +78,15 @@ struct papr_scm_priv {
> struct resource res;
> struct nd_region *region;
> struct nd_interleave_set nd_set;
> +
> + /* Protect dimm health data from concurrent read/writes */
> + struct mutex health_mutex;
> +
> + /* Last time the health information of the dimm was updated */
> + unsigned long lasthealth_jiffies;
> +
> + /* Health information for the dimm */
> + u64 health_bitmap;
> };
>
> static int drc_pmem_bind(struct papr_scm_priv *p)
> @@ -144,6 +192,61 @@ static int drc_pmem_query_n_bind(struct papr_scm_priv *p)
> return drc_pmem_bind(p);
> }
>
> +/*
> + * Issue hcall to retrieve dimm health info and populate papr_scm_priv with the
> + * health information.
> + */
> +static int __drc_pmem_query_health(struct papr_scm_priv *p)
> +{
> + unsigned long ret[PLPAR_HCALL_BUFSIZE];
> + long rc;
> +
> + /* issue the hcall */
> + rc = plpar_hcall(H_SCM_HEALTH, ret, p->drc_index);
> + if (rc != H_SUCCESS) {
> + dev_err(&p->pdev->dev,
> + "Failed to query health information, Err:%ld\n", rc);
> + return -ENXIO;
> + }
> +
> + p->lasthealth_jiffies = jiffies;
> + p->health_bitmap = ret[0] & ret[1];
> +
> + dev_dbg(&p->pdev->dev,
> + "Queried dimm health info. Bitmap:0x%016lx Mask:0x%016lx\n",
> + ret[0], ret[1]);
> +
> + return 0;
> +}
> +
> +/* Min interval in seconds for assuming stable dimm health */
> +#define MIN_HEALTH_QUERY_INTERVAL 60
> +
> +/* Query cached health info and if needed call drc_pmem_query_health */
> +static int drc_pmem_query_health(struct papr_scm_priv *p)
> +{
> + unsigned long cache_timeout;
> + int rc;
> +
> + /* Protect concurrent modifications to papr_scm_priv */
> + rc = mutex_lock_interruptible(&p->health_mutex);
> + if (rc)
> + return rc;
> +
> + /* Jiffies offset for which the health data is assumed to be same */
> + cache_timeout = p->lasthealth_jiffies +
> + msecs_to_jiffies(MIN_HEALTH_QUERY_INTERVAL * 1000);
> +
> + /* Fetch new health info is its older than MIN_HEALTH_QUERY_INTERVAL */
> + if (time_after(jiffies, cache_timeout))
> + rc = __drc_pmem_query_health(p);
> + else
> + /* Assume cached health data is valid */
> + rc = 0;
> +
> + mutex_unlock(&p->health_mutex);
> + return rc;
> +}
>
> static int papr_scm_meta_get(struct papr_scm_priv *p,
> struct nd_cmd_get_config_data_hdr *hdr)
> @@ -286,6 +389,64 @@ static int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc,
> return 0;
> }
>
> +static ssize_t flags_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct nvdimm *dimm = to_nvdimm(dev);
> + struct papr_scm_priv *p = nvdimm_provider_data(dimm);
> + struct seq_buf s;
> + u64 health;
> + int rc;
> +
> + rc = drc_pmem_query_health(p);
> + if (rc)
> + return rc;
> +
> + /* Copy health_bitmap locally, check masks & update out buffer */
> + health = READ_ONCE(p->health_bitmap);
> +
> + seq_buf_init(&s, buf, PAGE_SIZE);
> + if (health & PAPR_PMEM_UNARMED_MASK)
> + seq_buf_printf(&s, "not_armed ");
> +
> + if (health & PAPR_PMEM_BAD_SHUTDOWN_MASK)
> + seq_buf_printf(&s, "flush_fail ");
> +
> + if (health & PAPR_PMEM_BAD_RESTORE_MASK)
> + seq_buf_printf(&s, "restore_fail ");
> +
> + if (health & PAPR_PMEM_ENCRYPTED)
> + seq_buf_printf(&s, "encrypted ");
> +
> + if (health & PAPR_PMEM_SMART_EVENT_MASK)
> + seq_buf_printf(&s, "smart_notify ");
> +
> + if (health & PAPR_PMEM_SCRUBBED_AND_LOCKED)
> + seq_buf_printf(&s, "scrubbed locked ");
> +
> + if (seq_buf_used(&s))
> + seq_buf_printf(&s, "\n");
> +
> + return seq_buf_used(&s);
> +}
> +DEVICE_ATTR_RO(flags);
> +
> +/* papr_scm specific dimm attributes */
> +static struct attribute *papr_nd_attributes[] = {
> + &dev_attr_flags.attr,
> + NULL,
> +};
> +
> +static struct attribute_group papr_nd_attribute_group = {
> + .name = "papr",
> + .attrs = papr_nd_attributes,
> +};
> +
> +static const struct attribute_group *papr_nd_attr_groups[] = {
> + &papr_nd_attribute_group,
> + NULL,
> +};
> +
> static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
> {
> struct device *dev = &p->pdev->dev;
> @@ -312,8 +473,8 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
> dimm_flags = 0;
> set_bit(NDD_LABELING, &dimm_flags);
>
> - p->nvdimm = nvdimm_create(p->bus, p, NULL, dimm_flags,
> - PAPR_SCM_DIMM_CMD_MASK, 0, NULL);
> + p->nvdimm = nvdimm_create(p->bus, p, papr_nd_attr_groups,
> + dimm_flags, PAPR_SCM_DIMM_CMD_MASK, 0, NULL);
> if (!p->nvdimm) {
> dev_err(dev, "Error creating DIMM object for %pOF\n", p->dn);
> goto err;
> @@ -399,6 +560,9 @@ static int papr_scm_probe(struct platform_device *pdev)
> if (!p)
> return -ENOMEM;
>
> + /* Initialize the dimm mutex */
> + mutex_init(&p->health_mutex);
> +
> /* optional DT properties */
> of_property_read_u32(dn, "ibm,metadata-size", &metadata_size);
>
> --
> 2.26.2
>
^ permalink raw reply
* Re: [PATCH v2] ASoC: fsl_ssi: Fix bclk calculation for mono channel
From: Shengjiu Wang @ 2020-06-16 2:13 UTC (permalink / raw)
To: Nicolin Chen
Cc: Linux-ALSA, Timur Tabi, Xiubo Li, Fabio Estevam, Shengjiu Wang,
Takashi Iwai, linux-kernel, Mark Brown, linuxppc-dev
In-Reply-To: <20200616015851.GA23235@Asurada-Nvidia>
On Tue, Jun 16, 2020 at 9:59 AM Nicolin Chen <nicoleotsuka@gmail.com> wrote:
>
> On Tue, Jun 16, 2020 at 09:48:39AM +0800, Shengjiu Wang wrote:
> > On Tue, Jun 16, 2020 at 7:11 AM Nicolin Chen <nicoleotsuka@gmail.com> wrote:
> > >
> > > On Mon, Jun 15, 2020 at 01:56:18PM +0800, Shengjiu Wang wrote:
> > > > For mono channel, SSI will switch to Normal mode.
> > > >
> > > > In Normal mode and Network mode, the Word Length Control bits
> > > > control the word length divider in clock generator, which is
> > > > different with I2S Master mode (the word length is fixed to
> > > > 32bit), it should be the value of params_width(hw_params).
> > > >
> > > > The condition "slots == 2" is not good for I2S Master mode,
> > > > because for Network mode and Normal mode, the slots can also
> > > > be 2. Then we need to use (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK)
> > > > to check if it is I2S Master mode.
> > >
> > > The fsl_ssi_set_bclk is only called when fsl_ssi_is_i2s_master,
> > > though I agree that that line of comments sounds confusing now.
> >
> > Actually I think fsl_ssi_is_i2s_master is not accurate, it just checks
> > the Master mode, but didn't check the I2S mode.
> >
> > >
> > > > So we refine the famula for mono channel, otherwise there
> > >
> > > famula => formula?
> > >
> > > > will be sound issue for S24_LE.
> > > >
> > > > Fixes: b0a7043d5c2c ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width")
> > > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> > > > ---
> > > > changes in v2
> > > > - refine patch for Network mode and Normal mode.
> > > >
> > > > sound/soc/fsl/fsl_ssi.c | 15 +++++++++++----
> > > > 1 file changed, 11 insertions(+), 4 deletions(-)
> > > >
> > > > diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> > > > index bad89b0d129e..cbf67d132fda 100644
> > > > --- a/sound/soc/fsl/fsl_ssi.c
> > > > +++ b/sound/soc/fsl/fsl_ssi.c
> > > > @@ -678,7 +678,8 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
> > > > struct regmap *regs = ssi->regs;
> > > > u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
> > > > unsigned long clkrate, baudrate, tmprate;
> > > > - unsigned int slots = params_channels(hw_params);
> > > > + unsigned int channels = params_channels(hw_params);
> > > > + unsigned int slots;
> > > > unsigned int slot_width = 32;
> > > > u64 sub, savesub = 100000;
> > > > unsigned int freq;
> > > > @@ -688,9 +689,15 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
> > > > /* Override slots and slot_width if being specifically set... */
> > > > if (ssi->slots)
> > > > slots = ssi->slots;
> > > > - /* ...but keep 32 bits if slots is 2 -- I2S Master mode */
> > > > - if (ssi->slot_width && slots != 2)
> > > > - slot_width = ssi->slot_width;
> > > > + else
> > > > + /* Apply two slots for mono channel, because DC = 2 */
> > > > + slots = (channels == 1) ? 2 : channels;
> > > > +
> > > > + /* ...but keep 32 bits if I2S Master mode */
> > > > + if ((ssi->i2s_net & SSI_SCR_I2S_MODE_MASK) != SSI_SCR_I2S_MODE_MASTER ||
> > > > + channels == 1)
> > > > + slot_width = ssi->slot_width ? ssi->slot_width :
> > >
> > > This looks very complicated...can you review and try mine?
> > > (Basically, take 32-bit out of default but force it later)
> > >
> > > @@ -678,8 +678,9 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
> > > struct regmap *regs = ssi->regs;
> > > u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
> > > unsigned long clkrate, baudrate, tmprate;
> > > - unsigned int slots = params_channels(hw_params);
> > > - unsigned int slot_width = 32;
> > > + unsigned int channels = params_channels(hw_params);
> > > + unsigned int slot_width = params_width(hw_params);
> > > + unsigned int slots = 2;
> > > u64 sub, savesub = 100000;
> > > unsigned int freq;
> > > bool baudclk_is_used;
> > > @@ -688,10 +689,16 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
> > > /* Override slots and slot_width if being specifically set... */
> > > if (ssi->slots)
> > > slots = ssi->slots;
> > > - /* ...but keep 32 bits if slots is 2 -- I2S Master mode */
> > > - if (ssi->slot_width && slots != 2)
> > > + if (ssi->slot_width)
> > > slot_width = ssi->slot_width;
> > >
> > > + /*
> > > + * ...but force 32 bits for stereo audio. Note that mono audio is also
> > > + * sent in 2 slots via NORMAL mode, so check both slots and channels.
> > > + */
> > > + if (slots == 2 && channels == 2)
> > > + slot_width = 32;
> >
> > slots ==2 && channels ==2 does not mean the I2S Master mode.
> > For LEFT_J, it is also slots =2 & channels = 2, then the slot_width
> > should be params_width(hw_params).
> > and DSP_A/B also supports stereo.
>
> I think you have a point. Then would this condition work?
>
> + /* ...but force 32 bits for stereo audio using I2S Master Mode */
> + if (channels == 2 &&
> + ssi->i2s_net & SSI_SCR_I2S_MODE_MASK == SSI_SCR_I2S_MODE_MASTER)
>
> Similar to yours but the code above it could look straightforward.
I think it should work.
^ permalink raw reply
* Re: [PATCH v2] ASoC: fsl_ssi: Fix bclk calculation for mono channel
From: Nicolin Chen @ 2020-06-16 1:58 UTC (permalink / raw)
To: Shengjiu Wang
Cc: Linux-ALSA, Timur Tabi, Xiubo Li, Fabio Estevam, Shengjiu Wang,
Takashi Iwai, linux-kernel, Mark Brown, linuxppc-dev
In-Reply-To: <CAA+D8ANK079rFL-_kwYKkn=nvrsBJPHW8bWMTwNCwDVzHt0PdA@mail.gmail.com>
On Tue, Jun 16, 2020 at 09:48:39AM +0800, Shengjiu Wang wrote:
> On Tue, Jun 16, 2020 at 7:11 AM Nicolin Chen <nicoleotsuka@gmail.com> wrote:
> >
> > On Mon, Jun 15, 2020 at 01:56:18PM +0800, Shengjiu Wang wrote:
> > > For mono channel, SSI will switch to Normal mode.
> > >
> > > In Normal mode and Network mode, the Word Length Control bits
> > > control the word length divider in clock generator, which is
> > > different with I2S Master mode (the word length is fixed to
> > > 32bit), it should be the value of params_width(hw_params).
> > >
> > > The condition "slots == 2" is not good for I2S Master mode,
> > > because for Network mode and Normal mode, the slots can also
> > > be 2. Then we need to use (ssi->i2s_net & SSI_SCR_I2S_MODE_MASK)
> > > to check if it is I2S Master mode.
> >
> > The fsl_ssi_set_bclk is only called when fsl_ssi_is_i2s_master,
> > though I agree that that line of comments sounds confusing now.
>
> Actually I think fsl_ssi_is_i2s_master is not accurate, it just checks
> the Master mode, but didn't check the I2S mode.
>
> >
> > > So we refine the famula for mono channel, otherwise there
> >
> > famula => formula?
> >
> > > will be sound issue for S24_LE.
> > >
> > > Fixes: b0a7043d5c2c ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width")
> > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> > > ---
> > > changes in v2
> > > - refine patch for Network mode and Normal mode.
> > >
> > > sound/soc/fsl/fsl_ssi.c | 15 +++++++++++----
> > > 1 file changed, 11 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> > > index bad89b0d129e..cbf67d132fda 100644
> > > --- a/sound/soc/fsl/fsl_ssi.c
> > > +++ b/sound/soc/fsl/fsl_ssi.c
> > > @@ -678,7 +678,8 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
> > > struct regmap *regs = ssi->regs;
> > > u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
> > > unsigned long clkrate, baudrate, tmprate;
> > > - unsigned int slots = params_channels(hw_params);
> > > + unsigned int channels = params_channels(hw_params);
> > > + unsigned int slots;
> > > unsigned int slot_width = 32;
> > > u64 sub, savesub = 100000;
> > > unsigned int freq;
> > > @@ -688,9 +689,15 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
> > > /* Override slots and slot_width if being specifically set... */
> > > if (ssi->slots)
> > > slots = ssi->slots;
> > > - /* ...but keep 32 bits if slots is 2 -- I2S Master mode */
> > > - if (ssi->slot_width && slots != 2)
> > > - slot_width = ssi->slot_width;
> > > + else
> > > + /* Apply two slots for mono channel, because DC = 2 */
> > > + slots = (channels == 1) ? 2 : channels;
> > > +
> > > + /* ...but keep 32 bits if I2S Master mode */
> > > + if ((ssi->i2s_net & SSI_SCR_I2S_MODE_MASK) != SSI_SCR_I2S_MODE_MASTER ||
> > > + channels == 1)
> > > + slot_width = ssi->slot_width ? ssi->slot_width :
> >
> > This looks very complicated...can you review and try mine?
> > (Basically, take 32-bit out of default but force it later)
> >
> > @@ -678,8 +678,9 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
> > struct regmap *regs = ssi->regs;
> > u32 pm = 999, div2, psr, stccr, mask, afreq, factor, i;
> > unsigned long clkrate, baudrate, tmprate;
> > - unsigned int slots = params_channels(hw_params);
> > - unsigned int slot_width = 32;
> > + unsigned int channels = params_channels(hw_params);
> > + unsigned int slot_width = params_width(hw_params);
> > + unsigned int slots = 2;
> > u64 sub, savesub = 100000;
> > unsigned int freq;
> > bool baudclk_is_used;
> > @@ -688,10 +689,16 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
> > /* Override slots and slot_width if being specifically set... */
> > if (ssi->slots)
> > slots = ssi->slots;
> > - /* ...but keep 32 bits if slots is 2 -- I2S Master mode */
> > - if (ssi->slot_width && slots != 2)
> > + if (ssi->slot_width)
> > slot_width = ssi->slot_width;
> >
> > + /*
> > + * ...but force 32 bits for stereo audio. Note that mono audio is also
> > + * sent in 2 slots via NORMAL mode, so check both slots and channels.
> > + */
> > + if (slots == 2 && channels == 2)
> > + slot_width = 32;
>
> slots ==2 && channels ==2 does not mean the I2S Master mode.
> For LEFT_J, it is also slots =2 & channels = 2, then the slot_width
> should be params_width(hw_params).
> and DSP_A/B also supports stereo.
I think you have a point. Then would this condition work?
+ /* ...but force 32 bits for stereo audio using I2S Master Mode */
+ if (channels == 2 &&
+ ssi->i2s_net & SSI_SCR_I2S_MODE_MASK == SSI_SCR_I2S_MODE_MASTER)
Similar to yours but the code above it could look straightforward.
^ permalink raw reply
* [PATCH v4 3/3] btrfs: Use kfree() in btrfs_ioctl_get_subvol_info()
From: Waiman Long @ 2020-06-16 1:57 UTC (permalink / raw)
To: Andrew Morton, David Howells, Jarkko Sakkinen, James Morris,
Serge E. Hallyn, Linus Torvalds, Joe Perches, Matthew Wilcox,
David Rientjes
Cc: Jason A . Donenfeld, Michal Hocko, linux-btrfs, linux-kernel,
linux-mm, linux-sctp, target-devel, linux-stm32, devel,
linux-cifs, linux-scsi, kasan-dev, linux-wpan, Waiman Long,
Dan Carpenter, linux-pm, ecryptfs, linux-fscrypt, linux-mediatek,
linux-amlogic, virtualization, linux-nfs, netdev, linux-wireless,
David Sterba, linux-bluetooth, linux-security-module, keyrings,
tipc-discussion, linux-crypto, Johannes Weiner, linux-integrity,
linuxppc-dev, wireguard, linux-ppp
In-Reply-To: <20200616015718.7812-1-longman@redhat.com>
In btrfs_ioctl_get_subvol_info(), there is a classic case where kzalloc()
was incorrectly paired with kzfree(). According to David Sterba, there
isn't any sensitive information in the subvol_info that needs to be
cleared before freeing. So kfree_sensitive() isn't really needed,
use kfree() instead.
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Waiman Long <longman@redhat.com>
---
fs/btrfs/ioctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index f1dd9e4271e9..e8f7c5f00894 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -2692,7 +2692,7 @@ static int btrfs_ioctl_get_subvol_info(struct file *file, void __user *argp)
btrfs_put_root(root);
out_free:
btrfs_free_path(path);
- kfree_sensitive(subvol_info);
+ kfree(subvol_info);
return ret;
}
--
2.18.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox