* [PASEMI] Nemo board doesn't recognize any ATA disks with the pci-v5.16 updates
From: Christian Zigotzky @ 2021-11-09 14:45 UTC (permalink / raw)
To: bhelgaas@google.com >> Bjorn Helgaas, linuxppc-dev
Cc: Matthew Leaman, Darren Stevens, mad skateman, R.T.Dickinson,
Christian Zigotzky
In-Reply-To: <17e37b22-5839-0e3a-0dbf-9c676adb0dec@xenosoft.de>
[-- Attachment #1: Type: text/plain, Size: 772 bytes --]
Hello,
The Nemo board [1] doesn't recognize any ATA disks with the pci-v5.16
updates [2].
Error messages:
ata4.00: gc timeout cmd 0xec
ata4.00: failed to IDENTIFY (I/O error, error_mask=0x4)
ata1.00: gc timeout cmd 0xec
ata1.00: failed to IDENTIFY (I/O error, error_mask=0x4)
ata3.00: gc timeout cmd 0xec
ata3.00: failed to IDENTIFY (I/O error, error_mask=0x4)
I was able to revert the new pci-v5.16 updates [2]. After a new
compiling, the kernel recognize all ATA disks correctly.
Could you please check the pci-v5.16 updates [2]?
Please find attached the kernel config.
Thanks,
Christian
[1] https://en.wikipedia.org/wiki/AmigaOne_X1000
[2]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0c5c62ddf88c34bc83b66e4ac9beb2bb0e1887d4
[-- Attachment #2: nemo-5.16-alpha5.config --]
[-- Type: text/plain, Size: 140715 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 5.16.0 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=70500
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23000
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23000
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION="-a5_A-EON_X1000_Nemo"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="X1000"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# CONFIG_BPF_JIT is not set
# end of BPF subsystem
# CONFIG_PREEMPT_NONE_BEHAVIOUR is not set
CONFIG_PREEMPT_VOLUNTARY_BEHAVIOUR=y
# CONFIG_PREEMPT_BEHAVIOUR is not set
CONFIG_PREEMPT_VOLUNTARY=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
# CONFIG_CPU_ISOLATION is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CC_HAS_INT128=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_PPC64=y
#
# Processor support
#
CONFIG_PPC_BOOK3S_64=y
# CONFIG_PPC_BOOK3E_64 is not set
CONFIG_GENERIC_CPU=y
# CONFIG_CELL_CPU is not set
# CONFIG_POWER5_CPU is not set
# CONFIG_POWER6_CPU is not set
# CONFIG_POWER7_CPU is not set
# CONFIG_POWER8_CPU is not set
# CONFIG_POWER9_CPU is not set
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU_REGS=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_PPC_RADIX_MMU=y
CONFIG_PPC_RADIX_MMU_DEFAULT=y
CONFIG_PPC_HAVE_KUEP=y
CONFIG_PPC_KUEP=y
CONFIG_PPC_HAVE_KUAP=y
CONFIG_PPC_KUAP=y
# CONFIG_PPC_KUAP_DEBUG is not set
CONFIG_PPC_PKEY=y
CONFIG_PPC_MM_SLICES=y
CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_PMU_SYSFS is not set
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# end of Processor support
CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=33
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_NR_IRQS=512
CONFIG_NMI_IPI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
CONFIG_PPC_BARRIER_NOSPEC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=180
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_UDBG_16550=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PPC_DAWR=y
CONFIG_PGTABLE_LEVELS=4
#
# Platform support
#
# CONFIG_PPC_POWERNV is not set
# CONFIG_SCOM_DEBUGFS is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC_PASEMI=y
#
# PA Semi PWRficient options
#
CONFIG_PPC_PASEMI_NEMO=y
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
# end of PA Semi PWRficient options
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_PPC_DT_CPU_FTRS is not set
CONFIG_MPIC=y
# CONFIG_MPIC_MSGR is not set
CONFIG_PPC_I8259=y
CONFIG_MPIC_BROKEN_REGREAD=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling
#
# CPUIdle driver
#
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPUIdle driver
# CONFIG_GEN_RTC is not set
# end of Platform support
#
# Kernel options
#
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_PPC_TRANSACTIONAL_MEM is not set
# CONFIG_LD_HEAD_STUB_CATCH is not set
# CONFIG_PPC_QUEUED_SPINLOCKS is not set
CONFIG_PPC64_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
CONFIG_RELOCATABLE=y
# CONFIG_RELOCATABLE_TEST is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ILLEGAL_POINTER_VALUE=0x5deadbeef0000000
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_PPC_PAGE_SHIFT=12
CONFIG_THREAD_SHIFT=14
CONFIG_DATA_SHIFT=12
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_PPC_PROT_SAO_LPAR is not set
# CONFIG_SCHED_SMT is not set
# CONFIG_PPC_DENORMALISATION is not set
CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
# CONFIG_HIBERNATION is not set
# CONFIG_PM is not set
CONFIG_PPC_MEM_KEYS=y
# end of Kernel options
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_FSL_LBC is not set
# end of Bus options
CONFIG_NONSTATIC_KERNEL=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_VCPU_ASYNC_IOCTL=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_BOOK3S_HANDLER=y
CONFIG_KVM_BOOK3S_64_HANDLER=y
CONFIG_KVM_BOOK3S_PR_POSSIBLE=y
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_PR=m
CONFIG_KVM_XICS=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_NMI_WATCHDOG=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_PAGE_SIZE=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_ARCH_HAS_SCALED_CPUTIME=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_HAVE_ARCH_NVRAM_OPS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
# CONFIG_STRICT_KERNEL_RWX is not set
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
# CONFIG_STRICT_MODULE_RWX is not set
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG_COMMON=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_HAS_MMIOWB=y
CONFIG_MMIOWB=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
# CONFIG_COMPACTION is not set
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
# CONFIG_CMA_SYSFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_ZPOOL is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_ARCH_HAS_HUGEPD=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=y
CONFIG_XFRM_ESP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_IP_MROUTE is not set
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_NETLINK=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NETFILTER_NETLINK_OSF is not set
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_LOG_SYSLOG is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_PROCFS=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CONNTRACK_LABELS is not set
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NF_TABLES=y
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=y
CONFIG_NFT_COUNTER=y
# CONFIG_NFT_CONNLIMIT is not set
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_MASQ=y
CONFIG_NFT_REDIR=y
# CONFIG_NFT_NAT is not set
# CONFIG_NFT_TUNNEL is not set
# CONFIG_NFT_OBJREF is not set
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=y
CONFIG_NFT_COMPAT=y
# CONFIG_NFT_HASH is not set
CONFIG_NFT_FIB=y
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y
#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
# CONFIG_NETFILTER_XT_CONNMARK is not set
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=y
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NFT_DUP_IPV4=y
CONFIG_NFT_FIB_IPV4=y
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=y
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_RPFILTER is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_TABLES_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=y
# CONFIG_NF_TABLES_BRIDGE is not set
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_LEDS is not set
CONFIG_BT_MSFTEXT=y
# CONFIG_BT_AOSPEXT is not set
# CONFIG_BT_DEBUGFS is not set
# CONFIG_BT_SELFTEST is not set
# CONFIG_BT_FEATURE_DEBUG is not set
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
CONFIG_BT_HCIBTUSB_BCM=y
# CONFIG_BT_HCIBTUSB_MTK is not set
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_AG6XX is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_BT_MTKSDIO is not set
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_MCTP is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SELFTESTS=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
#
# DesignWare PCI Core Support
#
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCI_J721E_HOST is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_ELECTRA_CF=y
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE="radeon/ARUBA_me.bin radeon/ARUBA_pfp.bin radeon/ARUBA_rlc.bin radeon/BARTS_mc.bin radeon/BARTS_me.bin radeon/BARTS_pfp.bin radeon/BARTS_smc.bin radeon/bonaire_ce.bin radeon/bonaire_mc.bin radeon/bonaire_me.bin radeon/bonaire_mec.bin radeon/bonaire_pfp.bin radeon/bonaire_rlc.bin radeon/bonaire_sdma.bin radeon/bonaire_smc.bin radeon/BONAIRE_uvd.bin radeon/BONAIRE_vce.bin radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin radeon/CAICOS_pfp.bin radeon/CAICOS_smc.bin radeon/CAYMAN_mc.bin radeon/CAYMAN_me.bin radeon/CAYMAN_pfp.bin radeon/CAYMAN_rlc.bin radeon/CAYMAN_smc.bin radeon/CEDAR_me.bin radeon/CEDAR_pfp.bin radeon/CEDAR_rlc.bin radeon/CEDAR_smc.bin radeon/CYPRESS_me.bin radeon/CYPRESS_pfp.bin radeon/CYPRESS_rlc.bin radeon/CYPRESS_smc.bin radeon/CYPRESS_uvd.bin radeon/hainan_ce.bin radeon/hainan_mc.bin radeon/hainan_me.bin radeon/hainan_pfp.bin radeon/hainan_rlc.bin radeon/hainan_smc.bin radeon/hawaii_ce.bin radeon/hawaii_mc.bin radeon/hawaii_me.bin radeon/hawaii_mec.bin radeon/hawaii_pfp.bin radeon/hawaii_rlc.bin radeon/hawaii_sdma.bin radeon/hawaii_smc.bin radeon/JUNIPER_me.bin radeon/JUNIPER_pfp.bin radeon/JUNIPER_rlc.bin radeon/JUNIPER_smc.bin radeon/kabini_ce.bin radeon/kabini_me.bin radeon/kabini_mec.bin radeon/kabini_pfp.bin radeon/kabini_rlc.bin radeon/kabini_sdma.bin radeon/kaveri_ce.bin radeon/kaveri_me.bin radeon/kaveri_mec2.bin radeon/kaveri_mec.bin radeon/kaveri_pfp.bin radeon/kaveri_rlc.bin radeon/kaveri_sdma.bin radeon/mullins_ce.bin radeon/mullins_me.bin radeon/mullins_mec.bin radeon/mullins_pfp.bin radeon/mullins_rlc.bin radeon/mullins_sdma.bin radeon/oland_ce.bin radeon/oland_mc.bin radeon/oland_me.bin radeon/oland_pfp.bin radeon/oland_rlc.bin radeon/oland_smc.bin radeon/PALM_me.bin radeon/PALM_pfp.bin radeon/pitcairn_ce.bin radeon/pitcairn_k_smc.bin radeon/pitcairn_mc.bin radeon/pitcairn_me.bin radeon/pitcairn_pfp.bin radeon/pitcairn_rlc.bin radeon/pitcairn_smc.bin radeon/R100_cp.bin radeon/R200_cp.bin radeon/R300_cp.bin radeon/R420_cp.bin radeon/R520_cp.bin radeon/R600_me.bin radeon/R600_pfp.bin radeon/R600_rlc.bin radeon/R600_uvd.bin radeon/R700_rlc.bin radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin radeon/REDWOOD_rlc.bin radeon/REDWOOD_smc.bin radeon/RS600_cp.bin radeon/RS690_cp.bin radeon/RS780_me.bin radeon/RS780_pfp.bin radeon/RS780_uvd.bin radeon/RV610_me.bin radeon/RV610_pfp.bin radeon/RV620_me.bin radeon/RV620_pfp.bin radeon/RV630_me.bin radeon/RV630_pfp.bin radeon/RV635_me.bin radeon/RV635_pfp.bin radeon/RV670_me.bin radeon/RV670_pfp.bin radeon/RV710_me.bin radeon/RV710_pfp.bin radeon/RV710_smc.bin radeon/RV710_uvd.bin radeon/RV730_me.bin radeon/RV730_pfp.bin radeon/RV730_smc.bin radeon/RV740_smc.bin radeon/RV770_me.bin radeon/RV770_pfp.bin radeon/RV770_smc.bin radeon/RV770_uvd.bin radeon/SUMO2_me.bin radeon/SUMO2_pfp.bin radeon/SUMO_me.bin radeon/SUMO_pfp.bin radeon/SUMO_rlc.bin radeon/SUMO_uvd.bin radeon/tahiti_ce.bin radeon/tahiti_mc.bin radeon/tahiti_me.bin radeon/tahiti_pfp.bin radeon/tahiti_rlc.bin radeon/tahiti_smc.bin radeon/TAHITI_uvd.bin radeon/TAHITI_vce.bin radeon/TURKS_mc.bin radeon/TURKS_me.bin radeon/TURKS_pfp.bin radeon/TURKS_smc.bin radeon/verde_ce.bin radeon/verde_mc.bin radeon/verde_me.bin radeon/verde_pfp.bin radeon/verde_rlc.bin radeon/verde_smc.bin radeon/si58_mc.bin radeon/hawaii_k_smc.bin radeon/hainan_k_smc.bin radeon/bonaire_k_smc.bin radeon/tahiti_k_smc.bin radeon/oland_k_smc.bin radeon/verde_k_smc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SCCB=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices
# CONFIG_CONNECTOR is not set
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_OF_DMA_DEFAULT_COHERENT=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=m
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_PVPANIC is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_UFS_HWMON is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_AHCI_QORIQ is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=y
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
CONFIG_DM_RAID=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=y
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
# CONFIG_NET_VENDOR_ASIX is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_NET_VENDOR_INTEL is not set
CONFIG_NET_VENDOR_MICROSOFT=y
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_LITEX is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
CONFIG_NE2K_PCI=y
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PASEMI=y
CONFIG_PASEMI_MAC=y
# CONFIG_NET_VENDOR_PENSANDO is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SMSC is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
CONFIG_FIXED_PHY=y
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MARVELL_PHY=y
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
CONFIG_VITESSE_PHY=y
# CONFIG_XILINX_GMII2RGMII is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_THUNDER is not set
#
# MDIO Multiplexers
#
# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
#
# PCS device drivers
#
# CONFIG_PCS_XPCS is not set
# end of PCS device drivers
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
# CONFIG_PPP_MPPE is not set
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPPOE=y
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
# CONFIG_ATH11K is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
# CONFIG_AIRO_CS is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_HERMES=y
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=y
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=y
# CONFIG_PCMCIA_HERMES is not set
# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_ORINOCO_USB is not set
# CONFIG_P54_COMMON is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not set
# CONFIG_MT7663U is not set
# CONFIG_MT7663S is not set
# CONFIG_MT7915E is not set
# CONFIG_MT7921E is not set
# CONFIG_MT7921S is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
# CONFIG_RT2500USB is not set
# CONFIG_RT73USB is not set
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=y
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
# CONFIG_RTW89 is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
CONFIG_USB4_NET=y
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=900
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
# CONFIG_TABLET_USB_PEGASUS is not set
CONFIG_TABLET_SERIAL_WACOM4=y
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=2
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_PASEMI=y
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_SCR24X is not set
# CONFIG_IPWIRELESS is not set
# end of PCMCIA character devices
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PASEMI=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_BD99954 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_THERMAL_MMIO is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_PMT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=m
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD70528 is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
# CONFIG_LIRC is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_XMP_DECODER=y
# CONFIG_IR_IMON_DECODER is not set
# CONFIG_IR_RCMM_DECODER is not set
# CONFIG_RC_DEVICES is not set
CONFIG_CEC_CORE=y
#
# CEC support
#
# CONFIG_MEDIA_CEC_RC is not set
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
# end of Media core support
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
# end of Media controller options
#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_DEMUX_SECTION_LOSS_LOG=y
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options
#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_DTCS033 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_JL2005BCD is not set
# CONFIG_USB_GSPCA_KINECT is not set
# CONFIG_USB_GSPCA_KONICA is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_NW80X is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SE401 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STK1135 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TOPRO is not set
# CONFIG_USB_GSPCA_TOUPTEK is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m
#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_CXUSB_ANALOG=y
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_ZD1301=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_AS102=m
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=m
CONFIG_USB_HACKRF=m
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
CONFIG_VIDEO_SOLO6X10=m
CONFIG_VIDEO_TW5864=m
CONFIG_VIDEO_TW68=m
CONFIG_VIDEO_TW686X=m
#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DT3155=m
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
# CONFIG_VIDEO_SAA7134_GO7007 is not set
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
CONFIG_DVB_PT3=m
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
CONFIG_DVB_SMIPCIE=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
CONFIG_USB_RAREMONO=m
CONFIG_USB_MA901=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_TTPCI_EEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_VIDEO_CADENCE is not set
# CONFIG_VIDEO_ASPEED is not set
CONFIG_VIDEO_MUX=m
CONFIG_VIDEO_XILINX=m
# CONFIG_VIDEO_XILINX_CSI2RXSS is not set
CONFIG_VIDEO_XILINX_TPG=m
CONFIG_VIDEO_XILINX_VTC=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_DVB_PLATFORM_DRIVERS=y
# CONFIG_SDR_PLATFORM_DRIVERS is not set
#
# MMC/SDIO DVB adapters
#
# CONFIG_SMS_SDIO_DRV is not set
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIMC is not set
# CONFIG_VIDEO_VIVID is not set
# CONFIG_VIDEO_VIM2M is not set
# CONFIG_VIDEO_VICODEC is not set
# CONFIG_DVB_TEST_DRIVERS is not set
# end of Media drivers
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SONY_BTF_MPX=m
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
# end of RDS decoders
#
# Video decoders
#
CONFIG_VIDEO_ADV7183=m
CONFIG_VIDEO_ADV748X=m
CONFIG_VIDEO_ADV7842=m
CONFIG_VIDEO_ADV7842_CEC=y
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TC358743=m
CONFIG_VIDEO_TC358743_CEC=y
CONFIG_VIDEO_TVP514X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
CONFIG_VIDEO_TW9910=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
# end of Video decoders
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7343=m
CONFIG_VIDEO_ADV7393=m
CONFIG_VIDEO_ADV7511=m
CONFIG_VIDEO_ADV7511_CEC=y
CONFIG_VIDEO_AD9389B=m
CONFIG_VIDEO_AK881X=m
CONFIG_VIDEO_THS8200=m
# end of Video encoders
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# end of Video improvement chips
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
# end of Audio/Video compression chips
#
# SDR tuner chips
#
CONFIG_SDR_MAX2175=m
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_THS7303=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_I2C=m
CONFIG_VIDEO_ST_MIPID02=m
# end of Miscellaneous helper chips
#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=m
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_HI846 is not set
# CONFIG_VIDEO_IMX208 is not set
# CONFIG_VIDEO_IMX219 is not set
CONFIG_VIDEO_IMX258=m
CONFIG_VIDEO_IMX274=m
# CONFIG_VIDEO_IMX290 is not set
CONFIG_VIDEO_IMX319=m
CONFIG_VIDEO_IMX355=m
# CONFIG_VIDEO_OV02A10 is not set
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV2680=m
CONFIG_VIDEO_OV2685=m
CONFIG_VIDEO_OV5645=m
CONFIG_VIDEO_OV5647=m
CONFIG_VIDEO_OV6650=m
CONFIG_VIDEO_OV5670=m
# CONFIG_VIDEO_OV5675 is not set
CONFIG_VIDEO_OV5695=m
CONFIG_VIDEO_OV7251=m
CONFIG_VIDEO_OV772X=m
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_OV7740=m
CONFIG_VIDEO_OV8856=m
CONFIG_VIDEO_OV9640=m
CONFIG_VIDEO_OV9650=m
CONFIG_VIDEO_OV13858=m
# CONFIG_VIDEO_OV13B10 is not set
CONFIG_VIDEO_VS6624=m
CONFIG_VIDEO_MT9M001=m
CONFIG_VIDEO_MT9M032=m
CONFIG_VIDEO_MT9M111=m
CONFIG_VIDEO_MT9P031=m
CONFIG_VIDEO_MT9T001=m
CONFIG_VIDEO_MT9T112=m
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_MT9V032=m
CONFIG_VIDEO_MT9V111=m
CONFIG_VIDEO_SR030PC30=m
CONFIG_VIDEO_NOON010PC30=m
CONFIG_VIDEO_M5MOLS=m
# CONFIG_VIDEO_RDACM20 is not set
# CONFIG_VIDEO_RDACM21 is not set
CONFIG_VIDEO_RJ54N1=m
CONFIG_VIDEO_S5K6AA=m
CONFIG_VIDEO_S5K6A3=m
CONFIG_VIDEO_S5K4ECGX=m
CONFIG_VIDEO_S5K5BAF=m
CONFIG_VIDEO_ET8EK8=m
# end of Camera sensor devices
#
# Lens drivers
#
CONFIG_VIDEO_AK7375=m
CONFIG_VIDEO_DW9714=m
# CONFIG_VIDEO_DW9768 is not set
CONFIG_VIDEO_DW9807_VCM=m
# end of Lens drivers
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
CONFIG_VIDEO_LM3560=m
CONFIG_VIDEO_LM3646=m
# end of Flash devices
#
# SPI helper chips
#
# end of SPI helper chips
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_AS102_FE=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_GP8PSK_FE=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
CONFIG_DVB_MXL692=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
CONFIG_DVB_MN88443X=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBH29=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_HELENE=m
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
# end of Media ancillary drivers
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_VGA_ARB is not set
CONFIG_DRM=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TTM_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_LVDS is not set
# CONFIG_DRM_QXL is not set
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_ARCPGU is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_CIRRUS_QEMU=y
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_OF is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_BACKLIGHT_LED is not set
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=m
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=y
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=y
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_FM801=y
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
CONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
CONFIG_SND_HDA_CODEC_SIGMATEL=m
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=m
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CS8409 is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
CONFIG_SND_HDA_CODEC_CA0132=m
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=m
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
# end of HD-Audio
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_INTEL_DSP_CONFIG=m
# CONFIG_SND_PPC is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_UA101=y
CONFIG_SND_USB_USX2Y=y
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=y
CONFIG_SND_USB_HIFACE=y
CONFIG_SND_BCD2000=y
CONFIG_SND_USB_LINE6=y
CONFIG_SND_USB_POD=y
CONFIG_SND_USB_PODHD=y
CONFIG_SND_USB_TONEPORT=y
CONFIG_SND_USB_VARIAX=y
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
CONFIG_SND_VIRTIO=y
CONFIG_AC97_BUS=y
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_GLORIOUS=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_HIDPP is not set
# CONFIG_LOGITECH_FF is not set
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NINTENDO=m
CONFIG_NINTENDO_FF=y
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SEMITEK=y
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support
#
# I2C HID support
#
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
# end of HID support
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PCI_RENESAS=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
# CONFIG_PWRSEQ_SD8787 is not set
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_CQHCI is not set
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP50XX is not set
# CONFIG_LEDS_LP55XX_COMMON is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM3697=m
#
# Flash and Torch LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=y
# CONFIG_LEDS_TRIGGER_TTY is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_PASEMI=y
# CONFIG_EDAC_CPC925 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_R7301 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_PLX_DMA is not set
# CONFIG_XILINX_ZYNQMP_DPDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_SF_PDMA is not set
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_RTL8723BS is not set
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# end of Android
# CONFIG_LTE_GDM724X is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_KS7010 is not set
# CONFIG_XIL_AXIS_FIFO is not set
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_QLGE is not set
# CONFIG_WFX is not set
# CONFIG_GOLDFISH is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
CONFIG_USB4=y
# CONFIG_USB4_DEBUGFS_WRITE is not set
# CONFIG_USB4_DMA_TEST is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
CONFIG_MULTIPLEXER=m
#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
# CONFIG_MUX_MMIO is not set
# end of Multiplexer drivers
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
CONFIG_NTFS3_FS=y
# CONFIG_NTFS3_64BIT_CLUSTER is not set
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=y
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=y
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set
# CONFIG_NFS_V4_2_READ_PLUS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set
# CONFIG_NFSD_V4_2_INTER_SSC is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_ROOT is not set
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS_COMMON=y
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=m
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_VPMSUM is not set
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MD5_PPC is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_PPC is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_NX is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_VMX is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=m
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_DMA_OPS_BYPASS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MEMREMAP_COMPAT_ALIGN=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_UPROBE_EVENTS is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT=y
# CONFIG_SYNTH_EVENTS is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# powerpc Debugging
#
CONFIG_PPC_DISABLE_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
# CONFIG_PPC_RFI_SRR_DEBUG is not set
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_XMON_DEFAULT_RO_MODE=y
CONFIG_DEBUGGER=y
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_PPC_FAST_ENDIAN_SWITCH is not set
# end of powerpc Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking
^ permalink raw reply
* Re: powerpc: mcu_mpc8349emitx.c:189:13: error: unused variable 'ret' [-Werror=unused-variable]
From: Stephen Rothwell @ 2021-11-09 13:39 UTC (permalink / raw)
To: Naresh Kamboju
Cc: Anders Roxell, Uwe Kleine-König, open list, Scott Wood,
Linux-Next Mailing List, Paul Mackerras, linuxppc-dev
In-Reply-To: <CA+G9fYvviLKpT7a-1ZDmVp8YN8cCG0ixLpxv2uSubtsw-CkZCQ@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1924 bytes --]
Hi Naresh,
On Tue, 9 Nov 2021 18:37:48 +0530 Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>
> [Please ignore this email if it is already reported ]
>
> Regression found on powerpc gcc-8/9/10 and gcc-11 built with ppc6xx_defconfig
> Following build warnings / errors reported on linux next 20211109.
>
> metadata:
> git_describe: next-20211109
> git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
> git_short_log: c8109c2ba35e (\"Add linux-next specific files for 20211109\")
> target_arch: powerpc
> toolchain: gcc-11
>
> build error :
> --------------
> <stdin>:1559:2: warning: #warning syscall futex_waitv not implemented [-Wcpp]
> arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c: In function 'mcu_remove':
> arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c:189:13: error: unused
> variable 'ret' [-Werror=unused-variable]
> 189 | int ret;
> | ^~~
> cc1: all warnings being treated as errors
> make[4]: *** [scripts/Makefile.build:288:
> arch/powerpc/platforms/83xx/mcu_mpc8349emitx.o] Error 1
> make[4]: Target '__build' not remade because of errors.
> make[3]: *** [scripts/Makefile.build:571: arch/powerpc/platforms/83xx] Error 2
>
> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
>
> build link:
> -----------
> https://builds.tuxbuild.com/20fICxLPRCpcISasoGwKGICBELv/build.log
>
> build config:
> -------------
> https://builds.tuxbuild.com/20fICxLPRCpcISasoGwKGICBELv/config
>
> # To install tuxmake on your system globally
> # sudo pip3 install -U tuxmake
> tuxmake --runtime podman --target-arch powerpc --toolchain gcc-11
> --kconfig ppc6xx_defconfig
>
>
> --
> Linaro LKFT
> https://lkft.linaro.org
Caused by commit
5d354dc35ebb ("powerpc/83xx/mpc8349emitx: Make mcu_gpiochip_remove() return void")
that is now in Linus' tree.
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply
* powerpc: mcu_mpc8349emitx.c:189:13: error: unused variable 'ret' [-Werror=unused-variable]
From: Naresh Kamboju @ 2021-11-09 13:07 UTC (permalink / raw)
To: Paul Mackerras, linuxppc-dev, open list, Linux-Next Mailing List
Cc: Scott Wood, Stephen Rothwell, Anders Roxell
[Please ignore this email if it is already reported ]
Regression found on powerpc gcc-8/9/10 and gcc-11 built with ppc6xx_defconfig
Following build warnings / errors reported on linux next 20211109.
metadata:
git_describe: next-20211109
git_repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next
git_short_log: c8109c2ba35e (\"Add linux-next specific files for 20211109\")
target_arch: powerpc
toolchain: gcc-11
build error :
--------------
<stdin>:1559:2: warning: #warning syscall futex_waitv not implemented [-Wcpp]
arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c: In function 'mcu_remove':
arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c:189:13: error: unused
variable 'ret' [-Werror=unused-variable]
189 | int ret;
| ^~~
cc1: all warnings being treated as errors
make[4]: *** [scripts/Makefile.build:288:
arch/powerpc/platforms/83xx/mcu_mpc8349emitx.o] Error 1
make[4]: Target '__build' not remade because of errors.
make[3]: *** [scripts/Makefile.build:571: arch/powerpc/platforms/83xx] Error 2
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
build link:
-----------
https://builds.tuxbuild.com/20fICxLPRCpcISasoGwKGICBELv/build.log
build config:
-------------
https://builds.tuxbuild.com/20fICxLPRCpcISasoGwKGICBELv/config
# To install tuxmake on your system globally
# sudo pip3 install -U tuxmake
tuxmake --runtime podman --target-arch powerpc --toolchain gcc-11
--kconfig ppc6xx_defconfig
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply
* Re: [PATCH] powerpc/pseries: use slab context cpumask allocation in CPU hotplug init
From: Laurent Dufour @ 2021-11-09 10:27 UTC (permalink / raw)
To: Nicholas Piggin, linuxppc-dev
In-Reply-To: <20211105132923.1582514-1-npiggin@gmail.com>
Le 05/11/2021 à 14:29, Nicholas Piggin a écrit :
> Slab is up at this point, using the bootmem allocator triggers a
> warning. Switch to using the regular cpumask allocator.
>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---
>
> This only matters when CONFIG_CPUMASK_OFFNODE=y, which has not been
> possible before on powerpc.
Thanks Nick,
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
> Thanks,
> Nick
>
> arch/powerpc/platforms/pseries/hotplug-cpu.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
> index d646c22e94ab..78a70ba60d24 100644
> --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
> +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
> @@ -1016,12 +1016,13 @@ static int __init pseries_cpu_hotplug_init(void)
> /* Processors can be added/removed only on LPAR */
> if (firmware_has_feature(FW_FEATURE_LPAR)) {
> for_each_node(node) {
> - alloc_bootmem_cpumask_var(&node_recorded_ids_map[node]);
> + if (!alloc_cpumask_var_node(&node_recorded_ids_map[node],
> + GFP_KERNEL, node))
> + return -ENOMEM;
>
> /* Record ids of CPU added at boot time */
> - cpumask_or(node_recorded_ids_map[node],
> - node_recorded_ids_map[node],
> - cpumask_of_node(node));
> + cpumask_copy(node_recorded_ids_map[node],
> + cpumask_of_node(node));
> }
>
> of_reconfig_notifier_register(&pseries_smp_nb);
>
^ permalink raw reply
* [PATCH v2] powerpc/64s: introduce CONFIG_MAXSMP to test very large SMP
From: Nicholas Piggin @ 2021-11-09 6:51 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Nicholas Piggin
Similarly to x86, add MAXSMP that should help flush out problems with
vary large SMP and other values associated with very big systems.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
Since v1:
- Reduce MAXSMP NR_CPUS to 8192 if COMPILE_TEST, to reduce compile errors
that aren't caught by existing x86 builds.
Thanks,
Nick
arch/powerpc/Kconfig | 8 ++++++++
arch/powerpc/platforms/Kconfig.cputype | 9 +++++++--
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b8f6185d3998..d585fcfa456f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -64,6 +64,13 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK
config NEED_PER_CPU_PAGE_FIRST_CHUNK
def_bool y if PPC64
+config MAXSMP
+ bool "Enable Maximum number of SMP Processors and NUMA Nodes"
+ depends on SMP && DEBUG_KERNEL && PPC_BOOK3S_64
+ help
+ Enable maximum number of CPUS and NUMA Nodes for this architecture.
+ If unsure, say N.
+
config NR_IRQS
int "Number of virtual interrupt numbers"
range 32 1048576
@@ -666,6 +673,7 @@ config NUMA
config NODES_SHIFT
int
+ default "10" if MAXSMP
default "8" if PPC64
default "4"
depends on NUMA
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index a208997ade88..14c275e0ff93 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -475,9 +475,14 @@ config SMP
If you don't know what to do here, say N.
+# MAXSMP sets 8192 if COMPILE_TEST because that's what x86 has flushed out.
+# Exceeding that will cause a lot of compile errors. Have to deal with those
+# first.
config NR_CPUS
- int "Maximum number of CPUs (2-8192)" if SMP
- range 2 8192 if SMP
+ int "Maximum number of CPUs (2-8192)" if SMP && !MAXSMP
+ range 2 16384 if SMP
+ default 16384 if MAXSMP && !COMPILE_TEST
+ default 8192 if MAXSMP && COMPILE_TEST
default "1" if !SMP
default "32" if PPC64
default "4"
--
2.23.0
^ permalink raw reply related
* [PATCH v2 2/2] powerpc/pseries: Fix numa FORM2 parsing fallback code
From: Nicholas Piggin @ 2021-11-09 6:49 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Aneesh Kumar K . V, Nicholas Piggin
In-Reply-To: <20211109064900.2041386-1-npiggin@gmail.com>
In case the FORM2 distance table from firmware is not the expected size,
there is fallback code that just populates the lookup table as local vs
remote.
However it then continues on to use the distance table. Fix.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Fixes: 1c6b5a7e7405 ("powerpc/pseries: Add support for FORM2 associativity")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
This just rebases on the rename, and sets form2_distances pointer to
NULL rather than using a separate good variable.
Thanks,
Nick
arch/powerpc/mm/numa.c | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 53e990140916..59d3cfcd7887 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -407,30 +407,26 @@ static void initialize_form2_numa_distance_lookup_table(void)
if (form2_distances_length != max_numa_index * max_numa_index) {
WARN(1, "Wrong NUMA distance information\n");
- /* consider everybody else just remote. */
- for (i = 0; i < max_numa_index; i++) {
- for (j = 0; j < max_numa_index; j++) {
- int nodeA = numa_id_index_table[i];
- int nodeB = numa_id_index_table[j];
-
- if (nodeA == nodeB)
- numa_distance_table[nodeA][nodeB] = LOCAL_DISTANCE;
- else
- numa_distance_table[nodeA][nodeB] = REMOTE_DISTANCE;
- }
- }
+ form2_distances = NULL; // don't use it
}
-
distance_index = 0;
for (i = 0; i < max_numa_index; i++) {
for (j = 0; j < max_numa_index; j++) {
int nodeA = numa_id_index_table[i];
int nodeB = numa_id_index_table[j];
-
- numa_distance_table[nodeA][nodeB] = form2_distances[distance_index++];
- pr_debug("dist[%d][%d]=%d ", nodeA, nodeB, numa_distance_table[nodeA][nodeB]);
+ int dist;
+
+ if (form2_distances)
+ dist = form2_distances[distance_index++];
+ else if (nodeA == nodeB)
+ dist = LOCAL_DISTANCE;
+ else
+ dist = REMOTE_DISTANCE;
+ numa_distance_table[nodeA][nodeB] = dist;
+ pr_debug("dist[%d][%d]=%d ", nodeA, nodeB, dist);
}
}
+
of_node_put(root);
}
--
2.23.0
^ permalink raw reply related
* [PATCH v2 1/2] powerpc/pseries: rename numa_dist_table to form2_distances
From: Nicholas Piggin @ 2021-11-09 6:48 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Aneesh Kumar K . V, Nicholas Piggin
The name of the local variable holding the "form2" property address
conflicts with the numa_distance_table global.
This patch does 's/numa_dist_table/form2_distances/g' over the function,
which also renames numa_dist_table_length to form2_distances_length.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/mm/numa.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 6f14c8fb6359..53e990140916 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -376,9 +376,9 @@ static void initialize_form2_numa_distance_lookup_table(void)
{
int i, j;
struct device_node *root;
- const __u8 *numa_dist_table;
+ const __u8 *form2_distances;
const __be32 *numa_lookup_index;
- int numa_dist_table_length;
+ int form2_distances_length;
int max_numa_index, distance_index;
if (firmware_has_feature(FW_FEATURE_OPAL))
@@ -392,20 +392,20 @@ static void initialize_form2_numa_distance_lookup_table(void)
max_numa_index = of_read_number(&numa_lookup_index[0], 1);
/* first element of the array is the size and is encode-int */
- numa_dist_table = of_get_property(root, "ibm,numa-distance-table", NULL);
- numa_dist_table_length = of_read_number((const __be32 *)&numa_dist_table[0], 1);
+ form2_distances = of_get_property(root, "ibm,numa-distance-table", NULL);
+ form2_distances_length = of_read_number((const __be32 *)&form2_distances[0], 1);
/* Skip the size which is encoded int */
- numa_dist_table += sizeof(__be32);
+ form2_distances += sizeof(__be32);
- pr_debug("numa_dist_table_len = %d, numa_dist_indexes_len = %d\n",
- numa_dist_table_length, max_numa_index);
+ pr_debug("form2_distances_len = %d, numa_dist_indexes_len = %d\n",
+ form2_distances_length, max_numa_index);
for (i = 0; i < max_numa_index; i++)
/* +1 skip the max_numa_index in the property */
numa_id_index_table[i] = of_read_number(&numa_lookup_index[i + 1], 1);
- if (numa_dist_table_length != max_numa_index * max_numa_index) {
+ if (form2_distances_length != max_numa_index * max_numa_index) {
WARN(1, "Wrong NUMA distance information\n");
/* consider everybody else just remote. */
for (i = 0; i < max_numa_index; i++) {
@@ -427,7 +427,7 @@ static void initialize_form2_numa_distance_lookup_table(void)
int nodeA = numa_id_index_table[i];
int nodeB = numa_id_index_table[j];
- numa_distance_table[nodeA][nodeB] = numa_dist_table[distance_index++];
+ numa_distance_table[nodeA][nodeB] = form2_distances[distance_index++];
pr_debug("dist[%d][%d]=%d ", nodeA, nodeB, numa_distance_table[nodeA][nodeB]);
}
}
--
2.23.0
^ permalink raw reply related
* [PATCH v1] powerpc/64s: Get LPID bit width from device tree
From: Nicholas Piggin @ 2021-11-09 6:07 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Nicholas Piggin
Allow the LPID bit width and partition table size to be set at runtime
from the device tree.
Move the PID bit width detection into the same place.
KVM does not support using the extra bits yet, this is mainly required
to get the PTCR register values correct.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/book3s/64/mmu.h | 9 ++---
arch/powerpc/include/asm/kvm_book3s_asm.h | 6 +++-
arch/powerpc/include/asm/reg.h | 2 --
arch/powerpc/mm/book3s64/pgtable.c | 5 ---
arch/powerpc/mm/book3s64/radix_pgtable.c | 13 +------
arch/powerpc/mm/init_64.c | 44 +++++++++++++++++++++++
6 files changed, 55 insertions(+), 24 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h
index c02f42d1031e..8c500dd6fee4 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu.h
@@ -62,6 +62,9 @@ extern struct patb_entry *partition_tb;
#define PRTS_MASK 0x1f /* process table size field */
#define PRTB_MASK 0x0ffffffffffff000UL
+/* Number of supported LPID bits */
+extern unsigned int mmu_lpid_bits;
+
/* Number of supported PID bits */
extern unsigned int mmu_pid_bits;
@@ -76,10 +79,8 @@ extern unsigned long __ro_after_init radix_mem_block_size;
#define PRTB_SIZE_SHIFT (mmu_pid_bits + 4)
#define PRTB_ENTRIES (1ul << mmu_pid_bits)
-/*
- * Power9 currently only support 64K partition table size.
- */
-#define PATB_SIZE_SHIFT 16
+#define PATB_SIZE_SHIFT (mmu_lpid_bits + 4)
+#define PATB_ENTRIES (1ul << mmu_lpid_bits)
typedef unsigned long mm_context_id_t;
struct spinlock;
diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h
index b6d31bff5209..4d93e09a1ab9 100644
--- a/arch/powerpc/include/asm/kvm_book3s_asm.h
+++ b/arch/powerpc/include/asm/kvm_book3s_asm.h
@@ -15,7 +15,11 @@
#define XICS_IPI 2 /* interrupt source # for IPIs */
/* LPIDs we support with this build -- runtime limit may be lower */
-#define KVMPPC_NR_LPIDS (LPID_RSVD + 1)
+#define KVMPPC_NR_LPIDS (1ul << 12)
+
+/* Reserved LPID for partn switching */
+#define LPID_RSVD_POWER7 ((1ul << 10) - 1)
+#define LPID_RSVD (KVMPPC_NR_LPIDS - 1)
/* Maximum number of threads per physical core */
#define MAX_SMT_THREADS 8
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index e9d27265253b..30983f2fd6a4 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -474,8 +474,6 @@
#ifndef SPRN_LPID
#define SPRN_LPID 0x13F /* Logical Partition Identifier */
#endif
-#define LPID_RSVD_POWER7 0x3ff /* Reserved LPID for partn switching */
-#define LPID_RSVD 0xfff /* Reserved LPID for partn switching */
#define SPRN_HMER 0x150 /* Hypervisor maintenance exception reg */
#define HMER_DEBUG_TRIG (1ul << (63 - 17)) /* Debug trigger */
#define SPRN_HMEER 0x151 /* Hyp maintenance exception enable reg */
diff --git a/arch/powerpc/mm/book3s64/pgtable.c b/arch/powerpc/mm/book3s64/pgtable.c
index 9e16c7b1a6c5..13d1fbddecb9 100644
--- a/arch/powerpc/mm/book3s64/pgtable.c
+++ b/arch/powerpc/mm/book3s64/pgtable.c
@@ -207,17 +207,12 @@ void __init mmu_partition_table_init(void)
unsigned long patb_size = 1UL << PATB_SIZE_SHIFT;
unsigned long ptcr;
- BUILD_BUG_ON_MSG((PATB_SIZE_SHIFT > 36), "Partition table size too large.");
/* Initialize the Partition Table with no entries */
partition_tb = memblock_alloc(patb_size, patb_size);
if (!partition_tb)
panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
__func__, patb_size, patb_size);
- /*
- * update partition table control register,
- * 64 K size.
- */
ptcr = __pa(partition_tb) | (PATB_SIZE_SHIFT - 12);
set_ptcr_when_no_uv(ptcr);
powernv_set_nmmu_ptcr(ptcr);
diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
index ae20add7954a..1c855434f8dc 100644
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -33,7 +33,6 @@
#include <trace/events/thp.h>
-unsigned int mmu_pid_bits;
unsigned int mmu_base_pid;
unsigned long radix_mem_block_size __ro_after_init;
@@ -357,18 +356,13 @@ static void __init radix_init_pgtable(void)
-1, PAGE_KERNEL));
}
- /* Find out how many PID bits are supported */
if (!cpu_has_feature(CPU_FTR_HVMODE) &&
cpu_has_feature(CPU_FTR_P9_RADIX_PREFETCH_BUG)) {
/*
* Older versions of KVM on these machines perfer if the
* guest only uses the low 19 PID bits.
*/
- if (!mmu_pid_bits)
- mmu_pid_bits = 19;
- } else {
- if (!mmu_pid_bits)
- mmu_pid_bits = 20;
+ mmu_pid_bits = 19;
}
mmu_base_pid = 1;
@@ -449,11 +443,6 @@ static int __init radix_dt_scan_page_sizes(unsigned long node,
if (type == NULL || strcmp(type, "cpu") != 0)
return 0;
- /* Find MMU PID size */
- prop = of_get_flat_dt_prop(node, "ibm,mmu-pid-bits", &size);
- if (prop && size == 4)
- mmu_pid_bits = be32_to_cpup(prop);
-
/* Grab page size encodings */
prop = of_get_flat_dt_prop(node, "ibm,processor-radix-AP-encodings", &size);
if (!prop)
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 386be136026e..7d5a6cb7c76d 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -370,6 +370,9 @@ void register_page_bootmem_memmap(unsigned long section_nr,
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
#ifdef CONFIG_PPC_BOOK3S_64
+unsigned int mmu_lpid_bits;
+unsigned int mmu_pid_bits;
+
static bool disable_radix = !IS_ENABLED(CONFIG_PPC_RADIX_MMU_DEFAULT);
static int __init parse_disable_radix(char *p)
@@ -437,12 +440,53 @@ static void __init early_check_vec5(void)
}
}
+static int __init dt_scan_mmu_pid_width(unsigned long node,
+ const char *uname, int depth,
+ void *data)
+{
+ int size = 0;
+ const __be32 *prop;
+ const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+
+ /* We are scanning "cpu" nodes only */
+ if (type == NULL || strcmp(type, "cpu") != 0)
+ return 0;
+
+ /* Find MMU LPID, PID register size */
+ prop = of_get_flat_dt_prop(node, "ibm,mmu-lpid-bits", &size);
+ if (prop && size == 4)
+ mmu_lpid_bits = be32_to_cpup(prop);
+
+ prop = of_get_flat_dt_prop(node, "ibm,mmu-pid-bits", &size);
+ if (prop && size == 4)
+ mmu_pid_bits = be32_to_cpup(prop);
+
+ if (!mmu_pid_bits && !mmu_lpid_bits)
+ return 0;
+
+ return 1;
+}
+
void __init mmu_early_init_devtree(void)
{
+ int rc;
+
/* Disable radix mode based on kernel command line. */
if (disable_radix)
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
+ rc = of_scan_flat_dt(dt_scan_mmu_pid_width, NULL);
+ if (!rc) {
+ /* No LPID or PID register size details found in device tree. */
+ if (early_cpu_has_feature(CPU_FTR_ARCH_300))
+ mmu_pid_bits = 20; /* POWER9-10 */
+
+ if (early_cpu_has_feature(CPU_FTR_ARCH_207S))
+ mmu_lpid_bits = 12; /* POWER8-10 */
+ else
+ mmu_lpid_bits = 10; /* POWER7 */
+ }
+
/*
* Check /chosen/ibm,architecture-vec-5 if running as a guest.
* When running bare-metal, we can use radix if we like
--
2.23.0
^ permalink raw reply related
* [PATCH v5 4/4] powerpc/64s: enable MMU_LAZY_TLB_SHOOTDOWN
From: Nicholas Piggin @ 2021-11-09 4:11 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-arch, Randy Dunlap, linux-kernel, Nicholas Piggin,
Andy Lutomirski, linuxppc-dev
In-Reply-To: <20211109041119.1972927-1-npiggin@gmail.com>
On a 16-socket 192-core POWER8 system, a context switching benchmark
with as many software threads as CPUs (so each switch will go in and
out of idle), upstream can achieve a rate of about 1 million context
switches per second, due to contention on the mm refcount.
powerpc/64s meets the prerequisites for CONFIG_MMU_LAZY_TLB_SHOOTDOWN,
so enable the option. This increases the above benchmark to 118 million.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index ba5b66189358..8a584414ef67 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -249,6 +249,7 @@ config PPC
select IRQ_FORCED_THREADING
select MMU_GATHER_PAGE_SIZE
select MMU_GATHER_RCU_TABLE_FREE
+ select MMU_LAZY_TLB_SHOOTDOWN if PPC_BOOK3S_64
select MODULES_USE_ELF_RELA
select NEED_DMA_MAP_STATE if PPC64 || NOT_COHERENT_CACHE
select NEED_SG_DMA_LENGTH
--
2.23.0
^ permalink raw reply related
* [PATCH v5 3/4] lazy tlb: shoot lazies, a non-refcounting lazy tlb option
From: Nicholas Piggin @ 2021-11-09 4:11 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-arch, Randy Dunlap, linux-kernel, Nicholas Piggin,
Andy Lutomirski, linuxppc-dev
In-Reply-To: <20211109041119.1972927-1-npiggin@gmail.com>
On big systems, the mm refcount can become highly contented when doing
a lot of context switching with threaded applications (particularly
switching between the idle thread and an application thread).
Abandoning lazy tlb slows switching down quite a bit in the important
user->idle->user cases, so instead implement a non-refcounted scheme
that causes __mmdrop() to IPI all CPUs in the mm_cpumask and shoot down
any remaining lazy ones.
Shootdown IPIs are some concern, but they have not been observed to be
a big problem with this scheme (the powerpc implementation generated
314 additional interrupts on a 144 CPU system during a kernel compile).
There are a number of strategies that could be employed to reduce IPIs
if they turn out to be a problem for some workload.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/Kconfig | 15 +++++++++++++++
kernel/fork.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 66 insertions(+)
diff --git a/arch/Kconfig b/arch/Kconfig
index 73d98edc5cdc..2b70a9e7b142 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -444,6 +444,21 @@ config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
# already).
config MMU_LAZY_TLB_REFCOUNT
def_bool y
+ depends on !MMU_LAZY_TLB_SHOOTDOWN
+
+# This option allows MMU_LAZY_TLB_REFCOUNT=n. It ensures no CPUs are using an
+# mm as a lazy tlb beyond its last reference count, by shooting down these
+# users before the mm is deallocated. __mmdrop() first IPIs all CPUs that may
+# be using the mm as a lazy tlb, so that they may switch themselves to using
+# init_mm for their active mm. mm_cpumask(mm) is used to determine which CPUs
+# may be using mm as a lazy tlb mm.
+#
+# To implement this, an arch *must*:
+# - At the time of the final mmdrop of the mm, ensure mm_cpumask(mm) contains
+# at least all possible CPUs in which the mm is lazy.
+# - It must meet the requirements for MMU_LAZY_TLB_REFCOUNT=n (see above).
+config MMU_LAZY_TLB_SHOOTDOWN
+ bool
config ARCH_HAVE_NMI_SAFE_CMPXCHG
bool
diff --git a/kernel/fork.c b/kernel/fork.c
index 38681ad44c76..a7da9b0bc402 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -686,6 +686,53 @@ static void check_mm(struct mm_struct *mm)
#define allocate_mm() (kmem_cache_alloc(mm_cachep, GFP_KERNEL))
#define free_mm(mm) (kmem_cache_free(mm_cachep, (mm)))
+static void do_shoot_lazy_tlb(void *arg)
+{
+ struct mm_struct *mm = arg;
+
+ if (current->active_mm == mm) {
+ WARN_ON_ONCE(current->mm);
+ current->active_mm = &init_mm;
+ switch_mm(mm, &init_mm, current);
+ }
+}
+
+static void do_check_lazy_tlb(void *arg)
+{
+ struct mm_struct *mm = arg;
+
+ WARN_ON_ONCE(current->active_mm == mm);
+}
+
+static void shoot_lazy_tlbs(struct mm_struct *mm)
+{
+ if (IS_ENABLED(CONFIG_MMU_LAZY_TLB_SHOOTDOWN)) {
+ /*
+ * IPI overheads have not found to be expensive, but they could
+ * be reduced in a number of possible ways, for example (in
+ * roughly increasing order of complexity):
+ * - A batch of mms requiring IPIs could be gathered and freed
+ * at once.
+ * - CPUs could store their active mm somewhere that can be
+ * remotely checked without a lock, to filter out
+ * false-positives in the cpumask.
+ * - After mm_users or mm_count reaches zero, switching away
+ * from the mm could clear mm_cpumask to reduce some IPIs
+ * (some batching or delaying would help).
+ * - A delayed freeing and RCU-like quiescing sequence based on
+ * mm switching to avoid IPIs completely.
+ */
+ on_each_cpu_mask(mm_cpumask(mm), do_shoot_lazy_tlb, (void *)mm, 1);
+ if (IS_ENABLED(CONFIG_DEBUG_VM))
+ on_each_cpu(do_check_lazy_tlb, (void *)mm, 1);
+ } else {
+ /*
+ * In this case, lazy tlb mms are refounted and would not reach
+ * __mmdrop until all CPUs have switched away and mmdrop()ed.
+ */
+ }
+}
+
/*
* Called when the last reference to the mm
* is dropped: either by a lazy thread or by
@@ -695,6 +742,10 @@ void __mmdrop(struct mm_struct *mm)
{
BUG_ON(mm == &init_mm);
WARN_ON_ONCE(mm == current->mm);
+
+ /* Ensure no CPUs are using this as their lazy tlb mm */
+ shoot_lazy_tlbs(mm);
+
WARN_ON_ONCE(mm == current->active_mm);
mm_free_pgd(mm);
destroy_context(mm);
--
2.23.0
^ permalink raw reply related
* [PATCH v5 2/4] lazy tlb: allow lazy tlb mm refcounting to be configurable
From: Nicholas Piggin @ 2021-11-09 4:11 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-arch, Randy Dunlap, linux-kernel, Nicholas Piggin,
Andy Lutomirski, linuxppc-dev
In-Reply-To: <20211109041119.1972927-1-npiggin@gmail.com>
Add CONFIG_MMU_TLB_REFCOUNT which enables refcounting of the lazy tlb mm
when it is context switched. This can be disabled by architectures that
don't require this refcounting if they clean up lazy tlb mms when the
last refcount is dropped. Currently this is always enabled, which is
what existing code does, so the patch is effectively a no-op.
Rename rq->prev_mm to rq->prev_lazy_mm, because that's what it is.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
Documentation/vm/active_mm.rst | 6 ++++++
arch/Kconfig | 17 +++++++++++++++++
include/linux/sched/mm.h | 13 +++++++++++--
kernel/sched/core.c | 22 ++++++++++++++++++----
kernel/sched/sched.h | 4 +++-
5 files changed, 55 insertions(+), 7 deletions(-)
diff --git a/Documentation/vm/active_mm.rst b/Documentation/vm/active_mm.rst
index 6f8269c284ed..2b0d08332400 100644
--- a/Documentation/vm/active_mm.rst
+++ b/Documentation/vm/active_mm.rst
@@ -4,6 +4,12 @@
Active MM
=========
+Note, the mm_count refcount may no longer include the "lazy" users
+(running tasks with ->active_mm == mm && ->mm == NULL) on kernels
+with CONFIG_MMU_LAZY_TLB_REFCOUNT=n. Taking and releasing these lazy
+references must be done with mmgrab_lazy_tlb() and mmdrop_lazy_tlb()
+helpers which abstracts this config option.
+
::
List: linux-kernel
diff --git a/arch/Kconfig b/arch/Kconfig
index 8df1c7102643..73d98edc5cdc 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -428,6 +428,23 @@ config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
irqs disabled over activate_mm. Architectures that do IPI based TLB
shootdowns should enable this.
+# Use normal mm refcounting for MMU_LAZY_TLB kernel thread references.
+# MMU_LAZY_TLB_REFCOUNT=n can improve the scalability of context switching
+# to/from kernel threads when the same mm is running on a lot of CPUs (a large
+# multi-threaded application), by reducing contention on the mm refcount.
+#
+# This can be disabled if the architecture ensures no CPUs are using an mm as a
+# "lazy tlb" beyond its final refcount (i.e., by the time __mmdrop frees the mm
+# or its kernel page tables). This could be arranged by arch_exit_mmap(), or
+# final exit(2) TLB flush, for example.
+#
+# To implement this, an arch *must*:
+# Ensure the _lazy_tlb variants of mmgrab/mmdrop are used when dropping the
+# lazy reference of a kthread's ->active_mm (non-arch code has been converted
+# already).
+config MMU_LAZY_TLB_REFCOUNT
+ def_bool y
+
config ARCH_HAVE_NMI_SAFE_CMPXCHG
bool
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index f7a0b347fecb..939dee9f5bc8 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -52,12 +52,21 @@ static inline void mmdrop(struct mm_struct *mm)
/* Helpers for lazy TLB mm refcounting */
static inline void mmgrab_lazy_tlb(struct mm_struct *mm)
{
- mmgrab(mm);
+ if (IS_ENABLED(CONFIG_MMU_LAZY_TLB_REFCOUNT))
+ mmgrab(mm);
}
static inline void mmdrop_lazy_tlb(struct mm_struct *mm)
{
- mmdrop(mm);
+ if (IS_ENABLED(CONFIG_MMU_LAZY_TLB_REFCOUNT)) {
+ mmdrop(mm);
+ } else {
+ /*
+ * mmdrop_lazy_tlb must provide a full memory barrier, see the
+ * membarrier comment finish_task_switch which relies on this.
+ */
+ smp_mb();
+ }
}
/**
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 480205b6a188..8fdc004b4f1f 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -4772,7 +4772,7 @@ static struct rq *finish_task_switch(struct task_struct *prev)
__releases(rq->lock)
{
struct rq *rq = this_rq();
- struct mm_struct *mm = rq->prev_mm;
+ struct mm_struct *mm = NULL;
long prev_state;
/*
@@ -4791,7 +4791,10 @@ static struct rq *finish_task_switch(struct task_struct *prev)
current->comm, current->pid, preempt_count()))
preempt_count_set(FORK_PREEMPT_COUNT);
- rq->prev_mm = NULL;
+#ifdef CONFIG_MMU_LAZY_TLB_REFCOUNT
+ mm = rq->prev_lazy_mm;
+ rq->prev_lazy_mm = NULL;
+#endif
/*
* A task struct has one reference for the use as "current".
@@ -4927,9 +4930,20 @@ context_switch(struct rq *rq, struct task_struct *prev,
switch_mm_irqs_off(prev->active_mm, next->mm, next);
if (!prev->mm) { // from kernel
- /* will mmdrop_lazy_tlb() in finish_task_switch(). */
- rq->prev_mm = prev->active_mm;
+#ifdef CONFIG_MMU_LAZY_TLB_REFCOUNT
+ /* Will mmdrop_lazy_tlb() in finish_task_switch(). */
+ rq->prev_lazy_mm = prev->active_mm;
prev->active_mm = NULL;
+#else
+ /*
+ * Without MMU_LAZY_TLB_REFCOUNT there is no lazy
+ * tracking (because no rq->prev_lazy_mm) in
+ * finish_task_switch, so no mmdrop_lazy_tlb(), so no
+ * memory barrier for membarrier (see the membarrier
+ * comment in finish_task_switch()). Do it here.
+ */
+ smp_mb();
+#endif
}
}
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 3d3e5793e117..43e7fbe06557 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -977,7 +977,9 @@ struct rq {
struct task_struct *idle;
struct task_struct *stop;
unsigned long next_balance;
- struct mm_struct *prev_mm;
+#ifdef CONFIG_MMU_LAZY_TLB_REFCOUNT
+ struct mm_struct *prev_lazy_mm;
+#endif
unsigned int clock_update_flags;
u64 clock;
--
2.23.0
^ permalink raw reply related
* [PATCH v5 1/4] lazy tlb: introduce lazy mm refcount helper functions
From: Nicholas Piggin @ 2021-11-09 4:11 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-arch, Randy Dunlap, linux-kernel, Nicholas Piggin,
Andy Lutomirski, linuxppc-dev
In-Reply-To: <20211109041119.1972927-1-npiggin@gmail.com>
Add explicit _lazy_tlb annotated functions for lazy mm refcounting.
This makes lazy mm references more obvious, and allows explicit
refcounting to be removed if it is not used.
The non-trivial change in kthread_use_mm/kthread_unuse_mm is because it
is clever with refcounting: If it happens that the kthread's lazy tlb mm
(active_mm) is the same as the mm to be used, the code doesn't touch the
refcount but rather transfers the lazy refcount to used-mm refcount. Now
that lazy tlb mm refcount may not be equivalent to regular refcount,
this trick doesn't work and we must mmgrab a regular reference on mm to
use, and mmdrop_lazy_tlb the previous active_mm.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/arm/mach-rpc/ecard.c | 2 +-
arch/powerpc/kernel/smp.c | 2 +-
arch/powerpc/mm/book3s64/radix_tlb.c | 4 ++--
fs/exec.c | 2 +-
include/linux/sched/mm.h | 11 +++++++++++
kernel/cpu.c | 2 +-
kernel/exit.c | 2 +-
kernel/kthread.c | 21 +++++++++++++--------
kernel/sched/core.c | 15 ++++++++-------
9 files changed, 39 insertions(+), 22 deletions(-)
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
index 53813f9464a2..c30df1097c52 100644
--- a/arch/arm/mach-rpc/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -253,7 +253,7 @@ static int ecard_init_mm(void)
current->mm = mm;
current->active_mm = mm;
activate_mm(active_mm, mm);
- mmdrop(active_mm);
+ mmdrop_lazy_tlb(active_mm);
ecard_init_pgtables(mm);
return 0;
}
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 605bab448f84..88875387a347 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1582,7 +1582,7 @@ void start_secondary(void *unused)
if (IS_ENABLED(CONFIG_PPC32))
setup_kup();
- mmgrab(&init_mm);
+ mmgrab_lazy_tlb(&init_mm);
current->active_mm = &init_mm;
smp_store_cpu_info(cpu);
diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
index 7724af19ed7e..59156c2d2ebe 100644
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -786,10 +786,10 @@ void exit_lazy_flush_tlb(struct mm_struct *mm, bool always_flush)
if (current->active_mm == mm) {
WARN_ON_ONCE(current->mm != NULL);
/* Is a kernel thread and is using mm as the lazy tlb */
- mmgrab(&init_mm);
+ mmgrab_lazy_tlb(&init_mm);
current->active_mm = &init_mm;
switch_mm_irqs_off(mm, &init_mm, current);
- mmdrop(mm);
+ mmdrop_lazy_tlb(mm);
}
/*
diff --git a/fs/exec.c b/fs/exec.c
index a098c133d8d7..30ba5449bb14 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1030,7 +1030,7 @@ static int exec_mmap(struct mm_struct *mm)
mmput(old_mm);
return 0;
}
- mmdrop(active_mm);
+ mmdrop_lazy_tlb(active_mm);
return 0;
}
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index 5561486fddef..f7a0b347fecb 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -49,6 +49,17 @@ static inline void mmdrop(struct mm_struct *mm)
__mmdrop(mm);
}
+/* Helpers for lazy TLB mm refcounting */
+static inline void mmgrab_lazy_tlb(struct mm_struct *mm)
+{
+ mmgrab(mm);
+}
+
+static inline void mmdrop_lazy_tlb(struct mm_struct *mm)
+{
+ mmdrop(mm);
+}
+
/**
* mmget() - Pin the address space associated with a &struct mm_struct.
* @mm: The address space to pin.
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 192e43a87407..fffe8b738201 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -613,7 +613,7 @@ static int finish_cpu(unsigned int cpu)
*/
if (mm != &init_mm)
idle->active_mm = &init_mm;
- mmdrop(mm);
+ mmdrop_lazy_tlb(mm);
return 0;
}
diff --git a/kernel/exit.c b/kernel/exit.c
index 91a43e57a32e..8e7b41702ad6 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -475,7 +475,7 @@ static void exit_mm(void)
__set_current_state(TASK_RUNNING);
mmap_read_lock(mm);
}
- mmgrab(mm);
+ mmgrab_lazy_tlb(mm);
BUG_ON(mm != current->active_mm);
/* more a memory barrier than a real lock */
task_lock(current);
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 5b37a8567168..83ed75d531b4 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -1350,14 +1350,19 @@ void kthread_use_mm(struct mm_struct *mm)
WARN_ON_ONCE(!(tsk->flags & PF_KTHREAD));
WARN_ON_ONCE(tsk->mm);
+ /*
+ * It's possible that tsk->active_mm == mm here, but we must
+ * still mmgrab(mm) and mmdrop_lazy_tlb(active_mm), because lazy
+ * mm may not have its own refcount (see mmgrab/drop_lazy_tlb()).
+ */
+ mmgrab(mm);
+
task_lock(tsk);
/* Hold off tlb flush IPIs while switching mm's */
local_irq_disable();
active_mm = tsk->active_mm;
- if (active_mm != mm) {
- mmgrab(mm);
+ if (active_mm != mm)
tsk->active_mm = mm;
- }
tsk->mm = mm;
membarrier_update_current_mm(mm);
switch_mm_irqs_off(active_mm, mm, tsk);
@@ -1374,12 +1379,9 @@ void kthread_use_mm(struct mm_struct *mm)
* memory barrier after storing to tsk->mm, before accessing
* user-space memory. A full memory barrier for membarrier
* {PRIVATE,GLOBAL}_EXPEDITED is implicitly provided by
- * mmdrop(), or explicitly with smp_mb().
+ * mmdrop_lazy_tlb().
*/
- if (active_mm != mm)
- mmdrop(active_mm);
- else
- smp_mb();
+ mmdrop_lazy_tlb(active_mm);
to_kthread(tsk)->oldfs = force_uaccess_begin();
}
@@ -1411,10 +1413,13 @@ void kthread_unuse_mm(struct mm_struct *mm)
local_irq_disable();
tsk->mm = NULL;
membarrier_update_current_mm(NULL);
+ mmgrab_lazy_tlb(mm);
/* active_mm is still 'mm' */
enter_lazy_tlb(mm, tsk);
local_irq_enable();
task_unlock(tsk);
+
+ mmdrop(mm);
}
EXPORT_SYMBOL_GPL(kthread_unuse_mm);
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 1bba4128a3e6..480205b6a188 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -4831,13 +4831,14 @@ static struct rq *finish_task_switch(struct task_struct *prev)
* rq->curr, before returning to userspace, so provide them here:
*
* - a full memory barrier for {PRIVATE,GLOBAL}_EXPEDITED, implicitly
- * provided by mmdrop(),
+ * provided by mmdrop_lazy_tlb(),
* - a sync_core for SYNC_CORE.
*/
if (mm) {
membarrier_mm_sync_core_before_usermode(mm);
- mmdrop(mm);
+ mmdrop_lazy_tlb(mm);
}
+
if (unlikely(prev_state == TASK_DEAD)) {
if (prev->sched_class->task_dead)
prev->sched_class->task_dead(prev);
@@ -4900,9 +4901,9 @@ context_switch(struct rq *rq, struct task_struct *prev,
/*
* kernel -> kernel lazy + transfer active
- * user -> kernel lazy + mmgrab() active
+ * user -> kernel lazy + mmgrab_lazy_tlb() active
*
- * kernel -> user switch + mmdrop() active
+ * kernel -> user switch + mmdrop_lazy_tlb() active
* user -> user switch
*/
if (!next->mm) { // to kernel
@@ -4910,7 +4911,7 @@ context_switch(struct rq *rq, struct task_struct *prev,
next->active_mm = prev->active_mm;
if (prev->mm) // from user
- mmgrab(prev->active_mm);
+ mmgrab_lazy_tlb(prev->active_mm);
else
prev->active_mm = NULL;
} else { // to user
@@ -4926,7 +4927,7 @@ context_switch(struct rq *rq, struct task_struct *prev,
switch_mm_irqs_off(prev->active_mm, next->mm, next);
if (!prev->mm) { // from kernel
- /* will mmdrop() in finish_task_switch(). */
+ /* will mmdrop_lazy_tlb() in finish_task_switch(). */
rq->prev_mm = prev->active_mm;
prev->active_mm = NULL;
}
@@ -9441,7 +9442,7 @@ void __init sched_init(void)
/*
* The boot idle thread does lazy MMU switching as well:
*/
- mmgrab(&init_mm);
+ mmgrab_lazy_tlb(&init_mm);
enter_lazy_tlb(&init_mm, current);
/*
--
2.23.0
^ permalink raw reply related
* [PATCH v5 0/4] shoot lazy tlbs
From: Nicholas Piggin @ 2021-11-09 4:11 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-arch, Randy Dunlap, linux-kernel, Nicholas Piggin,
Andy Lutomirski, linuxppc-dev
Since v4, this fixes a kthread_use_mm refcounting bug and adds some
comments in code and changelogs around the kthread_use_mm change in
patch 1 (due to akpm's comment -- thanks).
It also adds and improves comments in code, changelogs, and Kconfig
options. The overall design is unchanged though. Please merge.
This series has suffered some issues getting agreement, so I would
like to address a few sticking points or misconceptions up front,
which hopefully can result in constructive disagreement and actual
actionable feedback.
* That the lazy mm scheme is complicated or bug prone.
This is not true, the concept is trivial and core code is extremely
simple and basically unchanged since Linus' active_mm email 20 years
ago in 2.3 days.
This series leaves the lazy tlb switching and ->active_mm semantics
entirely unchanged. It does change the refcounting, but the effects
are hidden under wrappers. It does not add anything new for code
outside those few places to think about except that they must specify
_lazy_mm when refcounting this particular type of reference. This
is not much of a problem since lazy mm references never "escape"
from specific switching sequences and become hard to track. Refs
that go into the wider world are always normal ones (i.e., created
by explicit mmgrab or kthread_use_mm).
* That membarrier code is complicated
This is true. My series changes exactly nothing to do with
membarriers. My series is entirely about lazy mm, which has been
virtually unchanged for many years before membarrier.
membarrier code takes advantage of memory ordering in scheduler
switch code that lazy mm refcounting was providing, so this series
adds one commented smp_mb() ifdef there to replace the refcount op
being removed. That does not affect the ability to change membarrier
code in future because the refcounted path has to be accounted for
here anyway.
In other words, any changes to membarrier code which deal with the
refcounted lazy mm path that exists today, then dealing with the non
refcounted option is trivial.
* That active_mm should be removed from core code.
I don't know how to address this other than it's not a good or well
thought out idea. This is not happening and is certainly not related
to my series which does not change ->active_mm semantics at all.
* That this series provides an option for archs to enable which result
in stale ->active_mm pointers, whereby it is up to the arch to
ensure nothing dereferences those pointers.
This is FUD. It has always been false. Archs that enable
MMU_LAZY_TLB_SHOOTDOWN never ever have stale ->active_mm pointers,
ever. If active_mm is non-NULL, then that gives exactly the same
guarantees as you have today.
* That performance of IPIs or other things is a problem.
I posted actual numbers showing this was not a concern, and listed
some options that could reduce them further if needed. No numbers
were ever posted to support the other side of the argument.
* That the series is a powerpc specific thing.
Untrue. I have trivial sparc and alpha conversions as the first two
things I looked at which I have SMP qemu environments for.
* That this series somehow prevents future changes or improvements.
It doesn't.
* That the series is very complex, code is bad or has problems.
Look at the patches. They seem pretty small and simple to me. I am
happy to address specific issues that are pointed out though, and
have done so.
* That x86 is relevant here.
This patch does not touch or affect x86 in any way. x86 has gone off
and done its own horrendously complicated and under-documented thing
with active_mm and the lazy mm concept. But that has been entirely
hidden from core code by the arch context switching hooks. Core code
continues to operate on the concept of ->mm and ->active_mm, and this
series does not change that at all. x86 is no more or less divorced
from that after the series.
Nothing the series does constrains x86 or changes to it in future. The
option can not be used immediately by x86, but there is no reason x86
could not be adapted to use it, or change their scheme to something
else entirely. Where code can be adapted to be shared or made usable by
x86, I have no problem with doing that.
If I've missed something or I've got anything wrong with the above,
I'm happy to hear it.
Thanks,
Nick
Nicholas Piggin (4):
lazy tlb: introduce lazy mm refcount helper functions
lazy tlb: allow lazy tlb mm refcounting to be configurable
lazy tlb: shoot lazies, a non-refcounting lazy tlb option
powerpc/64s: enable MMU_LAZY_TLB_SHOOTDOWN
Documentation/vm/active_mm.rst | 6 ++++
arch/Kconfig | 32 +++++++++++++++++
arch/arm/mach-rpc/ecard.c | 2 +-
arch/powerpc/Kconfig | 1 +
arch/powerpc/kernel/smp.c | 2 +-
arch/powerpc/mm/book3s64/radix_tlb.c | 4 +--
fs/exec.c | 2 +-
include/linux/sched/mm.h | 20 +++++++++++
kernel/cpu.c | 2 +-
kernel/exit.c | 2 +-
kernel/fork.c | 51 ++++++++++++++++++++++++++++
kernel/kthread.c | 21 +++++++-----
kernel/sched/core.c | 35 +++++++++++++------
kernel/sched/sched.h | 4 ++-
14 files changed, 158 insertions(+), 26 deletions(-)
--
2.23.0
^ permalink raw reply
* Re: [PATCH] powerpc/pseries: use slab context cpumask allocation in CPU hotplug init
From: Nathan Lynch @ 2021-11-09 2:14 UTC (permalink / raw)
To: Nicholas Piggin; +Cc: ldufour, linuxppc-dev
In-Reply-To: <20211105132923.1582514-1-npiggin@gmail.com>
Nicholas Piggin <npiggin@gmail.com> writes:
> Slab is up at this point, using the bootmem allocator triggers a
> warning. Switch to using the regular cpumask allocator.
>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
> ---
>
> This only matters when CONFIG_CPUMASK_OFFNODE=y, which has not been
> possible before on powerpc.
>
> Thanks,
> Nick
>
> arch/powerpc/platforms/pseries/hotplug-cpu.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
> index d646c22e94ab..78a70ba60d24 100644
> --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
> +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
> @@ -1016,12 +1016,13 @@ static int __init pseries_cpu_hotplug_init(void)
> /* Processors can be added/removed only on LPAR */
> if (firmware_has_feature(FW_FEATURE_LPAR)) {
> for_each_node(node) {
> - alloc_bootmem_cpumask_var(&node_recorded_ids_map[node]);
> + if (!alloc_cpumask_var_node(&node_recorded_ids_map[node],
> + GFP_KERNEL, node))
> + return -ENOMEM;
>
> /* Record ids of CPU added at boot time */
> - cpumask_or(node_recorded_ids_map[node],
> - node_recorded_ids_map[node],
> - cpumask_of_node(node));
> + cpumask_copy(node_recorded_ids_map[node],
> + cpumask_of_node(node));
> }
>
> of_reconfig_notifier_register(&pseries_smp_nb);
^ permalink raw reply
* Re: [PATCH] powerpc/embedded6xx/hlwd-pic: Add missing of_node_put in hlwd_pic_probe
From: He Ying @ 2021-11-09 2:07 UTC (permalink / raw)
To: mpe, benh, paulus, maz; +Cc: linuxppc-dev, linux-kernel
In-Reply-To: <20211103014833.163615-1-heying24@huawei.com>
kindly ping...
在 2021/11/3 9:48, He Ying 写道:
> Early exits from for_each_compatible_node() should decrease the
> node reference count.
>
> Signed-off-by: He Ying <heying24@huawei.com>
> ---
> arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
> index 15396333a90b..a4b020e4b6af 100644
> --- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
> +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
> @@ -214,6 +214,7 @@ void hlwd_pic_probe(void)
> irq_set_chained_handler(cascade_virq,
> hlwd_pic_irq_cascade);
> hlwd_irq_host = host;
> + of_node_put(np);
> break;
> }
> }
^ permalink raw reply
* Re: [PATCH] powerpc/pseries/cpuhp: Use alloc_cpumask_var() in pseries_cpu_hotplug_init()
From: Nathan Lynch @ 2021-11-09 2:07 UTC (permalink / raw)
To: Waiman Long, Nicholas Piggin, Aneesh Kumar K.V,
Benjamin Herrenschmidt, Daniel Henrique Barboza, Michael Ellerman,
Paul Mackerras
Cc: linuxppc-dev, Laurent Dufour, Zhang Xiaoxu, linux-kernel
In-Reply-To: <a90f0361-329b-1e21-90c1-601d6f7c2f24@redhat.com>
Waiman Long <longman@redhat.com> writes:
> On 11/8/21 20:46, Nicholas Piggin wrote:
>> Differences between the two patches are error checking - no big deal but
>> we should just do it. And GFP_NOWAIT - is this required here?
>
> As I have replied in another thread, I added it because it was used in
> memblock_alloc_internal().
From the pseries code's point of view, that's an incidental property of
the misuse detection branch in memblock_alloc_internal() -- I'd
speculate to make it robust for calls from atomic context. GFP_NOWAIT is
not needed here.
^ permalink raw reply
* Re: [PATCH] powerpc/pseries/cpuhp: Use alloc_cpumask_var() in pseries_cpu_hotplug_init()
From: Waiman Long @ 2021-11-09 1:51 UTC (permalink / raw)
To: Nicholas Piggin, Aneesh Kumar K.V, Benjamin Herrenschmidt,
Daniel Henrique Barboza, Michael Ellerman, Nathan Lynch,
Paul Mackerras
Cc: Zhang Xiaoxu, Laurent Dufour, linuxppc-dev, linux-kernel
In-Reply-To: <1636421918.tc1hk6vx8h.astroid@bobo.none>
On 11/8/21 20:46, Nicholas Piggin wrote:
> Excerpts from Michael Ellerman's message of November 9, 2021 11:04 am:
>> Waiman Long <longman@redhat.com> writes:
>>> It was found that the following warning message could be printed out when
>>> booting the kernel on PowerPC systems that support LPAR:
>>>
>>> [ 0.129584] WARNING: CPU: 0 PID: 1 at mm/memblock.c:1451 memblock_alloc_internal+0x5c/0x104
>>> [ 0.129593] Modules linked in:
>>> [ 0.129598] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-11.el9.ppc64le+debug #1
>>> [ 0.129605] NIP: c000000002040134 LR: c00000000204011c CTR: c0000000020241a8
>>> [ 0.129610] REGS: c000000005637760 TRAP: 0700 Not tainted (5.14.0-11.el9.ppc64le+debug)
>>> [ 0.129616] MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 48000222 XER: 00000002
>>> [ 0.129635] CFAR: c0000000004d1cf4 IRQMASK: 0
>>> [ 0.129635] GPR00: c00000000204011c c000000005637a00 c000000002c94d00 0000000000000001
>>> [ 0.129635] GPR04: 0000000000000080 0000000000000000 0000000000000000 ffffffffffffffff
>>> [ 0.129635] GPR08: 0000000000000000 0000000000000003 c00000000205ac64 0000000000080000
>>> [ 0.129635] GPR12: 0000000000000000 c0000000049d0000 c000000000013078 0000000000000000
>>> [ 0.129635] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
>>> [ 0.129635] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
>>> [ 0.129635] GPR24: c000000002003808 c00000000146f7b8 0000000000000000 0000000000000100
>>> [ 0.129635] GPR28: c000000002d7cf80 0000000000000000 0000000000000008 0000000000000000
>>> [ 0.129710] NIP [c000000002040134] memblock_alloc_internal+0x5c/0x104
>>> [ 0.129717] LR [c00000000204011c] memblock_alloc_internal+0x44/0x104
>>> [ 0.129723] Call Trace:
>>> [ 0.129726] [c000000005637a00] [c000000005637a40] 0xc000000005637a40 (unreliable)
>>> [ 0.129735] [c000000005637a60] [c0000000020404d8] memblock_alloc_try_nid+0x94/0xcc
>>> [ 0.129743] [c000000005637af0] [c00000000205ac64] alloc_bootmem_cpumask_var+0x4c/0x9c
>>> [ 0.129751] [c000000005637b60] [c0000000020242e0] __machine_initcall_pseries_pseries_cpu_hotplug_init+0x138/0x1d8
>>> [ 0.129760] [c000000005637bf0] [c000000000012404] do_one_initcall+0xa4/0x4f0
>>> [ 0.129768] [c000000005637cd0] [c000000002005358] do_initcalls+0x140/0x18c
>>> [ 0.129776] [c000000005637d80] [c0000000020055b8] kernel_init_freeable+0x178/0x1d0
>>> [ 0.129783] [c000000005637db0] [c0000000000130a0] kernel_init+0x30/0x190
>>> [ 0.129790] [c000000005637e10] [c00000000000cef4] ret_from_kernel_thread+0x5c/0x64
>>>
>>> The warning is printed in memblock_alloc_internal() because the slab
>>> has been initialized when the initcalls are being processed. To
>>> avoid the warning, change alloc_bootmem_cpumask_var() call in
>>> pseries_cpu_hotplug_init() to alloc_cpumask_var() instead. Also
>>> change cpumask_or() to cpumask_copy() or we will have to use
>>> zalloc_cpumask_var().
>>>
>>> Fixes: bd1dd4c5f528 ("powerpc/pseries: Prevent free CPU ids being reused on another node")
>>> Signed-off-by: Waiman Long <longman@redhat.com>
>>> ---
>>> arch/powerpc/platforms/pseries/hotplug-cpu.c | 8 ++++----
>>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> This looks similar to the patch Nick sent recently:
>>
>> https://lore.kernel.org/linuxppc-dev/20211105132923.1582514-1-npiggin@gmail.com/
> Ah, you get CONFIG_CPUMASK_OFFSTACK=y if CONFIG_DEBUG_PER_CPU_MAPS=y.
> I was wondering how Waiman found it.
>
> Differences between the two patches are error checking - no big deal but
> we should just do it. And GFP_NOWAIT - is this required here?
As I have replied in another thread, I added it because it was used in
memblock_alloc_internal().
Cheers,
Longman
^ permalink raw reply
* Re: [PATCH] powerpc/pseries/cpuhp: Use alloc_cpumask_var() in pseries_cpu_hotplug_init()
From: Waiman Long @ 2021-11-09 1:48 UTC (permalink / raw)
To: Nathan Lynch
Cc: linuxppc-dev, Daniel Henrique Barboza, linux-kernel,
Nicholas Piggin, Paul Mackerras, Aneesh Kumar K.V, Laurent Dufour,
Zhang Xiaoxu
In-Reply-To: <875yt2jlhm.fsf@linux.ibm.com>
On 11/8/21 18:06, Nathan Lynch wrote:
> Waiman Long <longman@redhat.com> writes:
>
>> It was found that the following warning message could be printed out when
>> booting the kernel on PowerPC systems that support LPAR:
>>
>> [ 0.129584] WARNING: CPU: 0 PID: 1 at mm/memblock.c:1451 memblock_alloc_internal+0x5c/0x104
>> [ 0.129593] Modules linked in:
>> [ 0.129598] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-11.el9.ppc64le+debug #1
>> [ 0.129605] NIP: c000000002040134 LR: c00000000204011c CTR: c0000000020241a8
>> [ 0.129610] REGS: c000000005637760 TRAP: 0700 Not tainted (5.14.0-11.el9.ppc64le+debug)
>> [ 0.129616] MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 48000222 XER: 00000002
>> [ 0.129635] CFAR: c0000000004d1cf4 IRQMASK: 0
>> [ 0.129635] GPR00: c00000000204011c c000000005637a00 c000000002c94d00 0000000000000001
>> [ 0.129635] GPR04: 0000000000000080 0000000000000000 0000000000000000 ffffffffffffffff
>> [ 0.129635] GPR08: 0000000000000000 0000000000000003 c00000000205ac64 0000000000080000
>> [ 0.129635] GPR12: 0000000000000000 c0000000049d0000 c000000000013078 0000000000000000
>> [ 0.129635] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
>> [ 0.129635] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
>> [ 0.129635] GPR24: c000000002003808 c00000000146f7b8 0000000000000000 0000000000000100
>> [ 0.129635] GPR28: c000000002d7cf80 0000000000000000 0000000000000008 0000000000000000
>> [ 0.129710] NIP [c000000002040134] memblock_alloc_internal+0x5c/0x104
>> [ 0.129717] LR [c00000000204011c] memblock_alloc_internal+0x44/0x104
>> [ 0.129723] Call Trace:
>> [ 0.129726] [c000000005637a00] [c000000005637a40] 0xc000000005637a40 (unreliable)
>> [ 0.129735] [c000000005637a60] [c0000000020404d8] memblock_alloc_try_nid+0x94/0xcc
>> [ 0.129743] [c000000005637af0] [c00000000205ac64] alloc_bootmem_cpumask_var+0x4c/0x9c
>> [ 0.129751] [c000000005637b60] [c0000000020242e0] __machine_initcall_pseries_pseries_cpu_hotplug_init+0x138/0x1d8
>> [ 0.129760] [c000000005637bf0] [c000000000012404] do_one_initcall+0xa4/0x4f0
>> [ 0.129768] [c000000005637cd0] [c000000002005358] do_initcalls+0x140/0x18c
>> [ 0.129776] [c000000005637d80] [c0000000020055b8] kernel_init_freeable+0x178/0x1d0
>> [ 0.129783] [c000000005637db0] [c0000000000130a0] kernel_init+0x30/0x190
>> [ 0.129790] [c000000005637e10] [c00000000000cef4] ret_from_kernel_thread+0x5c/0x64
>>
>> The warning is printed in memblock_alloc_internal() because the slab
>> has been initialized when the initcalls are being processed.
> Looks like CONFIG_CPUMASK_OFFSTACK=y is necessary for the warning to
> trigger... guess that explains how it's escaped notice.
>
>> To
>> avoid the warning, change alloc_bootmem_cpumask_var() call in
>> pseries_cpu_hotplug_init() to alloc_cpumask_var() instead. Also
>> change cpumask_or() to cpumask_copy() or we will have to use
>> zalloc_cpumask_var().
> Makes sense.
>
>
>> Fixes: bd1dd4c5f528 ("powerpc/pseries: Prevent free CPU ids being reused on another node")
>> Signed-off-by: Waiman Long <longman@redhat.com>
>> ---
>> arch/powerpc/platforms/pseries/hotplug-cpu.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
>> index 5ab44600c8d3..e8e08d916b16 100644
>> --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
>> +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
>> @@ -864,12 +864,12 @@ static int __init pseries_cpu_hotplug_init(void)
>> /* Processors can be added/removed only on LPAR */
>> if (firmware_has_feature(FW_FEATURE_LPAR)) {
>> for_each_node(node) {
>> - alloc_bootmem_cpumask_var(&node_recorded_ids_map[node]);
>> + alloc_cpumask_var(&node_recorded_ids_map[node],
>> + GFP_KERNEL|GFP_NOWAIT);
> This isn't atomic context, so GFP_KERNEL alone should be used.
>
> Otherwise this change looks right to me.
I added GFP_NOWAIT because the kzalloc_node() call from
memblock_alloc_internal() uses GFP_NOWAIT. That makes sense as you don't
want to wait in an initcall. Anyway, that shouldn't really matter as
there should be enough free memory at bootup time to satisfy the request
without waiting. So GFP_NOWAIT may not be necessary.
Cheers,
Longman
^ permalink raw reply
* Re: [PATCH] powerpc/pseries/cpuhp: Use alloc_cpumask_var() in pseries_cpu_hotplug_init()
From: Nicholas Piggin @ 2021-11-09 1:46 UTC (permalink / raw)
To: Aneesh Kumar K.V, Benjamin Herrenschmidt, Daniel,
Henrique Barboza, Waiman Long, Michael Ellerman, Nathan Lynch,
Paul Mackerras
Cc: Zhang, Xiaoxu, Laurent, Dufour, linuxppc-dev, linux-kernel
In-Reply-To: <87y25ym96i.fsf@mpe.ellerman.id.au>
Excerpts from Michael Ellerman's message of November 9, 2021 11:04 am:
> Waiman Long <longman@redhat.com> writes:
>> It was found that the following warning message could be printed out when
>> booting the kernel on PowerPC systems that support LPAR:
>>
>> [ 0.129584] WARNING: CPU: 0 PID: 1 at mm/memblock.c:1451 memblock_alloc_internal+0x5c/0x104
>> [ 0.129593] Modules linked in:
>> [ 0.129598] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-11.el9.ppc64le+debug #1
>> [ 0.129605] NIP: c000000002040134 LR: c00000000204011c CTR: c0000000020241a8
>> [ 0.129610] REGS: c000000005637760 TRAP: 0700 Not tainted (5.14.0-11.el9.ppc64le+debug)
>> [ 0.129616] MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 48000222 XER: 00000002
>> [ 0.129635] CFAR: c0000000004d1cf4 IRQMASK: 0
>> [ 0.129635] GPR00: c00000000204011c c000000005637a00 c000000002c94d00 0000000000000001
>> [ 0.129635] GPR04: 0000000000000080 0000000000000000 0000000000000000 ffffffffffffffff
>> [ 0.129635] GPR08: 0000000000000000 0000000000000003 c00000000205ac64 0000000000080000
>> [ 0.129635] GPR12: 0000000000000000 c0000000049d0000 c000000000013078 0000000000000000
>> [ 0.129635] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
>> [ 0.129635] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
>> [ 0.129635] GPR24: c000000002003808 c00000000146f7b8 0000000000000000 0000000000000100
>> [ 0.129635] GPR28: c000000002d7cf80 0000000000000000 0000000000000008 0000000000000000
>> [ 0.129710] NIP [c000000002040134] memblock_alloc_internal+0x5c/0x104
>> [ 0.129717] LR [c00000000204011c] memblock_alloc_internal+0x44/0x104
>> [ 0.129723] Call Trace:
>> [ 0.129726] [c000000005637a00] [c000000005637a40] 0xc000000005637a40 (unreliable)
>> [ 0.129735] [c000000005637a60] [c0000000020404d8] memblock_alloc_try_nid+0x94/0xcc
>> [ 0.129743] [c000000005637af0] [c00000000205ac64] alloc_bootmem_cpumask_var+0x4c/0x9c
>> [ 0.129751] [c000000005637b60] [c0000000020242e0] __machine_initcall_pseries_pseries_cpu_hotplug_init+0x138/0x1d8
>> [ 0.129760] [c000000005637bf0] [c000000000012404] do_one_initcall+0xa4/0x4f0
>> [ 0.129768] [c000000005637cd0] [c000000002005358] do_initcalls+0x140/0x18c
>> [ 0.129776] [c000000005637d80] [c0000000020055b8] kernel_init_freeable+0x178/0x1d0
>> [ 0.129783] [c000000005637db0] [c0000000000130a0] kernel_init+0x30/0x190
>> [ 0.129790] [c000000005637e10] [c00000000000cef4] ret_from_kernel_thread+0x5c/0x64
>>
>> The warning is printed in memblock_alloc_internal() because the slab
>> has been initialized when the initcalls are being processed. To
>> avoid the warning, change alloc_bootmem_cpumask_var() call in
>> pseries_cpu_hotplug_init() to alloc_cpumask_var() instead. Also
>> change cpumask_or() to cpumask_copy() or we will have to use
>> zalloc_cpumask_var().
>>
>> Fixes: bd1dd4c5f528 ("powerpc/pseries: Prevent free CPU ids being reused on another node")
>> Signed-off-by: Waiman Long <longman@redhat.com>
>> ---
>> arch/powerpc/platforms/pseries/hotplug-cpu.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>
>
> This looks similar to the patch Nick sent recently:
>
> https://lore.kernel.org/linuxppc-dev/20211105132923.1582514-1-npiggin@gmail.com/
Ah, you get CONFIG_CPUMASK_OFFSTACK=y if CONFIG_DEBUG_PER_CPU_MAPS=y.
I was wondering how Waiman found it.
Differences between the two patches are error checking - no big deal but
we should just do it. And GFP_NOWAIT - is this required here?
Thanks,
Nick
^ permalink raw reply
* Re: [PATCH] powerpc/pseries/cpuhp: Use alloc_cpumask_var() in pseries_cpu_hotplug_init()
From: Waiman Long @ 2021-11-09 1:43 UTC (permalink / raw)
To: Michael Ellerman, Benjamin Herrenschmidt, Paul Mackerras,
Daniel Henrique Barboza, Nathan Lynch, Aneesh Kumar K.V
Cc: Zhang Xiaoxu, Laurent Dufour, linuxppc-dev, linux-kernel,
Nicholas Piggin
In-Reply-To: <87y25ym96i.fsf@mpe.ellerman.id.au>
On 11/8/21 20:04, Michael Ellerman wrote:
> Waiman Long <longman@redhat.com> writes:
>> It was found that the following warning message could be printed out when
>> booting the kernel on PowerPC systems that support LPAR:
>>
>> [ 0.129584] WARNING: CPU: 0 PID: 1 at mm/memblock.c:1451 memblock_alloc_internal+0x5c/0x104
>> [ 0.129593] Modules linked in:
>> [ 0.129598] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-11.el9.ppc64le+debug #1
>> [ 0.129605] NIP: c000000002040134 LR: c00000000204011c CTR: c0000000020241a8
>> [ 0.129610] REGS: c000000005637760 TRAP: 0700 Not tainted (5.14.0-11.el9.ppc64le+debug)
>> [ 0.129616] MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 48000222 XER: 00000002
>> [ 0.129635] CFAR: c0000000004d1cf4 IRQMASK: 0
>> [ 0.129635] GPR00: c00000000204011c c000000005637a00 c000000002c94d00 0000000000000001
>> [ 0.129635] GPR04: 0000000000000080 0000000000000000 0000000000000000 ffffffffffffffff
>> [ 0.129635] GPR08: 0000000000000000 0000000000000003 c00000000205ac64 0000000000080000
>> [ 0.129635] GPR12: 0000000000000000 c0000000049d0000 c000000000013078 0000000000000000
>> [ 0.129635] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
>> [ 0.129635] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
>> [ 0.129635] GPR24: c000000002003808 c00000000146f7b8 0000000000000000 0000000000000100
>> [ 0.129635] GPR28: c000000002d7cf80 0000000000000000 0000000000000008 0000000000000000
>> [ 0.129710] NIP [c000000002040134] memblock_alloc_internal+0x5c/0x104
>> [ 0.129717] LR [c00000000204011c] memblock_alloc_internal+0x44/0x104
>> [ 0.129723] Call Trace:
>> [ 0.129726] [c000000005637a00] [c000000005637a40] 0xc000000005637a40 (unreliable)
>> [ 0.129735] [c000000005637a60] [c0000000020404d8] memblock_alloc_try_nid+0x94/0xcc
>> [ 0.129743] [c000000005637af0] [c00000000205ac64] alloc_bootmem_cpumask_var+0x4c/0x9c
>> [ 0.129751] [c000000005637b60] [c0000000020242e0] __machine_initcall_pseries_pseries_cpu_hotplug_init+0x138/0x1d8
>> [ 0.129760] [c000000005637bf0] [c000000000012404] do_one_initcall+0xa4/0x4f0
>> [ 0.129768] [c000000005637cd0] [c000000002005358] do_initcalls+0x140/0x18c
>> [ 0.129776] [c000000005637d80] [c0000000020055b8] kernel_init_freeable+0x178/0x1d0
>> [ 0.129783] [c000000005637db0] [c0000000000130a0] kernel_init+0x30/0x190
>> [ 0.129790] [c000000005637e10] [c00000000000cef4] ret_from_kernel_thread+0x5c/0x64
>>
>> The warning is printed in memblock_alloc_internal() because the slab
>> has been initialized when the initcalls are being processed. To
>> avoid the warning, change alloc_bootmem_cpumask_var() call in
>> pseries_cpu_hotplug_init() to alloc_cpumask_var() instead. Also
>> change cpumask_or() to cpumask_copy() or we will have to use
>> zalloc_cpumask_var().
>>
>> Fixes: bd1dd4c5f528 ("powerpc/pseries: Prevent free CPU ids being reused on another node")
>> Signed-off-by: Waiman Long <longman@redhat.com>
>> ---
>> arch/powerpc/platforms/pseries/hotplug-cpu.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> This looks similar to the patch Nick sent recently:
>
> https://lore.kernel.org/linuxppc-dev/20211105132923.1582514-1-npiggin@gmail.com/
I was not aware of Nick's patch. Since a fix is pending, I am
withdrawing mime.
Cheers,
Longman
^ permalink raw reply
* Re: [PATCH] powerpc/pseries: Fix numa FORM2 parsing fallback code
From: Michael Ellerman @ 2021-11-09 1:10 UTC (permalink / raw)
To: Nicholas Piggin, linuxppc-dev; +Cc: Aneesh Kumar K . V
In-Reply-To: <1636379534.jahqi8gtfo.astroid@bobo.none>
Nicholas Piggin <npiggin@gmail.com> writes:
> Excerpts from Michael Ellerman's message of November 8, 2021 3:20 pm:
>> Nicholas Piggin <npiggin@gmail.com> writes:
>>> In case the FORM2 distance table from firmware is not the expected size,
>>> there is fallback code that just populates the lookup table as local vs
>>> remote.
>>>
>>> However it then continues on to use the distance table. Fix.
>>>
>>> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
>>> Fixes: 1c6b5a7e7405 ("powerpc/pseries: Add support for FORM2 associativity")
>>> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
>>> ---
>>> arch/powerpc/mm/numa.c | 29 +++++++++++++----------------
>>> 1 file changed, 13 insertions(+), 16 deletions(-)
>>>
>>> diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
>>> index 6f14c8fb6359..0789cde7f658 100644
>>> --- a/arch/powerpc/mm/numa.c
>>> +++ b/arch/powerpc/mm/numa.c
>>> @@ -380,6 +380,7 @@ static void initialize_form2_numa_distance_lookup_table(void)
>>> const __be32 *numa_lookup_index;
>>> int numa_dist_table_length;
>>> int max_numa_index, distance_index;
>>> + bool good = true;
>>
>> numa_dist_table is a pointer, so couldn't we just set it to NULL if the
>> info it's pointing at is invalid?
>
> Yeah probably could just do that.
>
>>
>>>
>>> if (firmware_has_feature(FW_FEATURE_OPAL))
>>> root = of_find_node_by_path("/ibm,opal");
>>> @@ -407,30 +408,26 @@ static void initialize_form2_numa_distance_lookup_table(void)
>>>
>>> if (numa_dist_table_length != max_numa_index * max_numa_index) {
>>> WARN(1, "Wrong NUMA distance information\n");
>>> - /* consider everybody else just remote. */
>>> - for (i = 0; i < max_numa_index; i++) {
>>> - for (j = 0; j < max_numa_index; j++) {
>>> - int nodeA = numa_id_index_table[i];
>>> - int nodeB = numa_id_index_table[j];
>>> -
>>> - if (nodeA == nodeB)
>>> - numa_distance_table[nodeA][nodeB] = LOCAL_DISTANCE;
>>> - else
>>> - numa_distance_table[nodeA][nodeB] = REMOTE_DISTANCE;
>>> - }
>>> - }
>>> + good = false;
>>
>> ie. numa_dist_table = NULL;
>>
>>> }
>>> -
>>> distance_index = 0;
>>> for (i = 0; i < max_numa_index; i++) {
>>> for (j = 0; j < max_numa_index; j++) {
>>> int nodeA = numa_id_index_table[i];
>>> int nodeB = numa_id_index_table[j];
>>> -
>>> - numa_distance_table[nodeA][nodeB] = numa_dist_table[distance_index++];
>>> - pr_debug("dist[%d][%d]=%d ", nodeA, nodeB, numa_distance_table[nodeA][nodeB]);
>>> + int dist;
>>> +
>>> + if (good)
>>
>> if (numa_dist_table)
>>
>>> + dist = numa_dist_table[distance_index++];
>>> + else if (nodeA == nodeB)
>>> + dist = LOCAL_DISTANCE;
>>> + else
>>> + dist = REMOTE_DISTANCE;
>>> + numa_distance_table[nodeA][nodeB] = dist;
>>> + pr_debug("dist[%d][%d]=%d ", nodeA, nodeB, dist);
>>> }
>>> }
>>> +
>>> of_node_put(root);
>>> }
>>
>>
>> But maybe before we do that we can rename it, because it is really easy
>> to confuse numa_dist_table and numa_distance_table if you don't look
>> closely.
>
> Maybe dt_form2_distances?
Or just "form2_distances", it's only a local so the fact that it's from
the dt is clear enough I think.
cheers
^ permalink raw reply
* Re: [PATCH] powerpc/64s: introduce CONFIG_MAXSMP to test very large SMP
From: Michael Ellerman @ 2021-11-09 1:09 UTC (permalink / raw)
To: Nicholas Piggin, linuxppc-dev
In-Reply-To: <1636379634.t1oqdo5jl5.astroid@bobo.none>
Nicholas Piggin <npiggin@gmail.com> writes:
> Excerpts from Michael Ellerman's message of November 8, 2021 3:28 pm:
>> Nicholas Piggin <npiggin@gmail.com> writes:
>>> Similarly to x86, add MAXSMP that should help flush out problems with
>>> vary large SMP and other values associated with very big systems.
>>>
>>> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
>>> ---
>>> arch/powerpc/Kconfig | 8 ++++++++
>>> arch/powerpc/platforms/Kconfig.cputype | 5 +++--
>>> 2 files changed, 11 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
>>> index b8f6185d3998..d585fcfa456f 100644
>>> --- a/arch/powerpc/Kconfig
>>> +++ b/arch/powerpc/Kconfig
>>> @@ -64,6 +64,13 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK
>>> config NEED_PER_CPU_PAGE_FIRST_CHUNK
>>> def_bool y if PPC64
>>>
>>> +config MAXSMP
>>> + bool "Enable Maximum number of SMP Processors and NUMA Nodes"
>>> + depends on SMP && DEBUG_KERNEL && PPC_BOOK3S_64
>>> + help
>>> + Enable maximum number of CPUS and NUMA Nodes for this architecture.
>>> + If unsure, say N.
>>
>> As evidenced by the kernel robot report, I think we need to exclude this
>> from allyesconfig.
>>
>> Because our max is 16K, larger than the 8K on x86, we are going to be
>> constantly hitting stack usage errors in driver code. Getting those
>> fixed tends to take time, because the driver authors don't see the
>> warnings when they build for other arches, and because the fixes go via
>> driver trees.
>
> Yeah I realised after I hit send. Surprisingly there weren't too many
> but agree going ahead of x86 would always come with annoyances and at
> least would have to fix existing tree.
>
>> Making MAXSMP depend on !COMPILE_TEST should do the trick.
>
> I'll do that. Or maybe make it 8192 if COMPILE_TEST otherwise 16384.
Yeah that could be OK.
> The reason for 16K is if we bump the deault at some point we might go to
> 8K, in which case it would be good to have a test above it to catch
> marginal cases.
Yeah makes sense to have some head room.
cheers
^ permalink raw reply
* Re: [PATCH] powerpc/pseries/cpuhp: Use alloc_cpumask_var() in pseries_cpu_hotplug_init()
From: Michael Ellerman @ 2021-11-09 1:04 UTC (permalink / raw)
To: Waiman Long, Benjamin Herrenschmidt, Paul Mackerras,
Daniel Henrique Barboza, Nathan Lynch, Aneesh Kumar K.V
Cc: linuxppc-dev, linux-kernel, Nicholas Piggin, Waiman Long,
Laurent Dufour, Zhang Xiaoxu
In-Reply-To: <20211108164751.65565-1-longman@redhat.com>
Waiman Long <longman@redhat.com> writes:
> It was found that the following warning message could be printed out when
> booting the kernel on PowerPC systems that support LPAR:
>
> [ 0.129584] WARNING: CPU: 0 PID: 1 at mm/memblock.c:1451 memblock_alloc_internal+0x5c/0x104
> [ 0.129593] Modules linked in:
> [ 0.129598] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-11.el9.ppc64le+debug #1
> [ 0.129605] NIP: c000000002040134 LR: c00000000204011c CTR: c0000000020241a8
> [ 0.129610] REGS: c000000005637760 TRAP: 0700 Not tainted (5.14.0-11.el9.ppc64le+debug)
> [ 0.129616] MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 48000222 XER: 00000002
> [ 0.129635] CFAR: c0000000004d1cf4 IRQMASK: 0
> [ 0.129635] GPR00: c00000000204011c c000000005637a00 c000000002c94d00 0000000000000001
> [ 0.129635] GPR04: 0000000000000080 0000000000000000 0000000000000000 ffffffffffffffff
> [ 0.129635] GPR08: 0000000000000000 0000000000000003 c00000000205ac64 0000000000080000
> [ 0.129635] GPR12: 0000000000000000 c0000000049d0000 c000000000013078 0000000000000000
> [ 0.129635] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> [ 0.129635] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> [ 0.129635] GPR24: c000000002003808 c00000000146f7b8 0000000000000000 0000000000000100
> [ 0.129635] GPR28: c000000002d7cf80 0000000000000000 0000000000000008 0000000000000000
> [ 0.129710] NIP [c000000002040134] memblock_alloc_internal+0x5c/0x104
> [ 0.129717] LR [c00000000204011c] memblock_alloc_internal+0x44/0x104
> [ 0.129723] Call Trace:
> [ 0.129726] [c000000005637a00] [c000000005637a40] 0xc000000005637a40 (unreliable)
> [ 0.129735] [c000000005637a60] [c0000000020404d8] memblock_alloc_try_nid+0x94/0xcc
> [ 0.129743] [c000000005637af0] [c00000000205ac64] alloc_bootmem_cpumask_var+0x4c/0x9c
> [ 0.129751] [c000000005637b60] [c0000000020242e0] __machine_initcall_pseries_pseries_cpu_hotplug_init+0x138/0x1d8
> [ 0.129760] [c000000005637bf0] [c000000000012404] do_one_initcall+0xa4/0x4f0
> [ 0.129768] [c000000005637cd0] [c000000002005358] do_initcalls+0x140/0x18c
> [ 0.129776] [c000000005637d80] [c0000000020055b8] kernel_init_freeable+0x178/0x1d0
> [ 0.129783] [c000000005637db0] [c0000000000130a0] kernel_init+0x30/0x190
> [ 0.129790] [c000000005637e10] [c00000000000cef4] ret_from_kernel_thread+0x5c/0x64
>
> The warning is printed in memblock_alloc_internal() because the slab
> has been initialized when the initcalls are being processed. To
> avoid the warning, change alloc_bootmem_cpumask_var() call in
> pseries_cpu_hotplug_init() to alloc_cpumask_var() instead. Also
> change cpumask_or() to cpumask_copy() or we will have to use
> zalloc_cpumask_var().
>
> Fixes: bd1dd4c5f528 ("powerpc/pseries: Prevent free CPU ids being reused on another node")
> Signed-off-by: Waiman Long <longman@redhat.com>
> ---
> arch/powerpc/platforms/pseries/hotplug-cpu.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
This looks similar to the patch Nick sent recently:
https://lore.kernel.org/linuxppc-dev/20211105132923.1582514-1-npiggin@gmail.com/
cheers
^ permalink raw reply
* Re: [PATCH] powerpc/pseries/cpuhp: Use alloc_cpumask_var() in pseries_cpu_hotplug_init()
From: Nathan Lynch @ 2021-11-08 23:06 UTC (permalink / raw)
To: Waiman Long
Cc: linuxppc-dev, Daniel Henrique Barboza, linux-kernel,
Nicholas Piggin, Paul Mackerras, Aneesh Kumar K.V, Laurent Dufour,
Zhang Xiaoxu
In-Reply-To: <20211108164751.65565-1-longman@redhat.com>
Waiman Long <longman@redhat.com> writes:
> It was found that the following warning message could be printed out when
> booting the kernel on PowerPC systems that support LPAR:
>
> [ 0.129584] WARNING: CPU: 0 PID: 1 at mm/memblock.c:1451 memblock_alloc_internal+0x5c/0x104
> [ 0.129593] Modules linked in:
> [ 0.129598] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-11.el9.ppc64le+debug #1
> [ 0.129605] NIP: c000000002040134 LR: c00000000204011c CTR: c0000000020241a8
> [ 0.129610] REGS: c000000005637760 TRAP: 0700 Not tainted (5.14.0-11.el9.ppc64le+debug)
> [ 0.129616] MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 48000222 XER: 00000002
> [ 0.129635] CFAR: c0000000004d1cf4 IRQMASK: 0
> [ 0.129635] GPR00: c00000000204011c c000000005637a00 c000000002c94d00 0000000000000001
> [ 0.129635] GPR04: 0000000000000080 0000000000000000 0000000000000000 ffffffffffffffff
> [ 0.129635] GPR08: 0000000000000000 0000000000000003 c00000000205ac64 0000000000080000
> [ 0.129635] GPR12: 0000000000000000 c0000000049d0000 c000000000013078 0000000000000000
> [ 0.129635] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> [ 0.129635] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> [ 0.129635] GPR24: c000000002003808 c00000000146f7b8 0000000000000000 0000000000000100
> [ 0.129635] GPR28: c000000002d7cf80 0000000000000000 0000000000000008 0000000000000000
> [ 0.129710] NIP [c000000002040134] memblock_alloc_internal+0x5c/0x104
> [ 0.129717] LR [c00000000204011c] memblock_alloc_internal+0x44/0x104
> [ 0.129723] Call Trace:
> [ 0.129726] [c000000005637a00] [c000000005637a40] 0xc000000005637a40 (unreliable)
> [ 0.129735] [c000000005637a60] [c0000000020404d8] memblock_alloc_try_nid+0x94/0xcc
> [ 0.129743] [c000000005637af0] [c00000000205ac64] alloc_bootmem_cpumask_var+0x4c/0x9c
> [ 0.129751] [c000000005637b60] [c0000000020242e0] __machine_initcall_pseries_pseries_cpu_hotplug_init+0x138/0x1d8
> [ 0.129760] [c000000005637bf0] [c000000000012404] do_one_initcall+0xa4/0x4f0
> [ 0.129768] [c000000005637cd0] [c000000002005358] do_initcalls+0x140/0x18c
> [ 0.129776] [c000000005637d80] [c0000000020055b8] kernel_init_freeable+0x178/0x1d0
> [ 0.129783] [c000000005637db0] [c0000000000130a0] kernel_init+0x30/0x190
> [ 0.129790] [c000000005637e10] [c00000000000cef4] ret_from_kernel_thread+0x5c/0x64
>
> The warning is printed in memblock_alloc_internal() because the slab
> has been initialized when the initcalls are being processed.
Looks like CONFIG_CPUMASK_OFFSTACK=y is necessary for the warning to
trigger... guess that explains how it's escaped notice.
> To
> avoid the warning, change alloc_bootmem_cpumask_var() call in
> pseries_cpu_hotplug_init() to alloc_cpumask_var() instead. Also
> change cpumask_or() to cpumask_copy() or we will have to use
> zalloc_cpumask_var().
Makes sense.
> Fixes: bd1dd4c5f528 ("powerpc/pseries: Prevent free CPU ids being reused on another node")
> Signed-off-by: Waiman Long <longman@redhat.com>
> ---
> arch/powerpc/platforms/pseries/hotplug-cpu.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
> index 5ab44600c8d3..e8e08d916b16 100644
> --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
> +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
> @@ -864,12 +864,12 @@ static int __init pseries_cpu_hotplug_init(void)
> /* Processors can be added/removed only on LPAR */
> if (firmware_has_feature(FW_FEATURE_LPAR)) {
> for_each_node(node) {
> - alloc_bootmem_cpumask_var(&node_recorded_ids_map[node]);
> + alloc_cpumask_var(&node_recorded_ids_map[node],
> + GFP_KERNEL|GFP_NOWAIT);
This isn't atomic context, so GFP_KERNEL alone should be used.
Otherwise this change looks right to me.
>
> /* Record ids of CPU added at boot time */
> - cpumask_or(node_recorded_ids_map[node],
> - node_recorded_ids_map[node],
> - cpumask_of_node(node));
> + cpumask_copy(node_recorded_ids_map[node],
> + cpumask_of_node(node));
> }
>
> of_reconfig_notifier_register(&pseries_smp_nb);
> --
> 2.27.0
^ permalink raw reply
* Re: [PATCH v0 42/42] notifier: Return an error when callback is already registered
From: Borislav Petkov @ 2021-11-08 21:18 UTC (permalink / raw)
To: Alan Stern
Cc: ALSA Development Mailing List, the arch/x86 maintainers,
Linux-sh list, linux-iio,
open list:REMOTE PROCESSOR (REMOTEPROC) SUBSYSTEM, linux-hyperv,
open list:BROADCOM NVRAM DRIVER, netdev, Ayush Sawal, sparclinux,
linux-clk, linux-leds, linux-s390, scsi, Rohit Maheshwari,
linux-staging, Geert Uytterhoeven, openipmi-developer,
bcm-kernel-feedback-list,
open list:TENSILICA XTENSA PORT (xtensa), Arnd Bergmann,
Linux PM list, Intel Graphics Development, Vinay Kumar Yadav,
linux-um, Steven Rostedt, rcu, Linux Fbdev development list,
xen-devel, linux-tegra, Thomas Gleixner, intel-gvt-dev, Linux ARM,
linux-edac, Parisc List, Greg Kroah-Hartman, USB list, LKML,
Linux-Renesas, Linux Crypto Mailing List, alpha, linuxppc-dev
In-Reply-To: <20211108205926.GA1678880@rowland.harvard.edu>
On Mon, Nov 08, 2021 at 03:59:26PM -0500, Alan Stern wrote:
> Is there really any reason for returning an error code? For example, is
> it anticipated that at some point in the future these registration calls
> might fail?
>
> Currently, the only reason for failing...
Right, I believe with not making it return void we're leaving the door
open for some, *hypothetical* future return values if we decide we need
to return them too, at some point.
Yes, I can't think of another fact to state besides that the callback
was already registered or return success but who knows what we wanna do
in the future...
And so if we change them all to void now, I think it'll be a lot more
churn to switch back to returning a non-void value and having the
callers who choose to handle that value, do so again.
So, long story short, keeping the retval - albeit not very useful right
now - is probably easier.
I hope I'm making some sense here.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox