* Support for ATARAID-Card with CMD680 chipset
@ 2002-11-07 13:30 Mike Greubel
2002-11-08 9:23 ` Arjan van de Ven
0 siblings, 1 reply; 2+ messages in thread
From: Mike Greubel @ 2002-11-07 13:30 UTC (permalink / raw)
To: linux-kernel
Hello,
I wan't to install Linux on a Raid0-Partition, which is created with a
Raid-Controller. The chipset is CMD680. This chipset is allready known
from linux, but it seems there is no way to get an hardware array
working. Maybe I'm to dumb to do it. I don't know, how to write a driver
or a patch.
Hope that there is a way to get it work.
Sorry for my bad english.
You guys are doing a great job!
Mike Greubel
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Support for ATARAID-Card with CMD680 chipset
2002-11-07 13:30 Support for ATARAID-Card with CMD680 chipset Mike Greubel
@ 2002-11-08 9:23 ` Arjan van de Ven
0 siblings, 0 replies; 2+ messages in thread
From: Arjan van de Ven @ 2002-11-08 9:23 UTC (permalink / raw)
To: Mike Greubel; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 486 bytes --]
On Thu, 2002-11-07 at 14:30, Mike Greubel wrote:
> Hello,
>
> I wan't to install Linux on a Raid0-Partition, which is created with a
> Raid-Controller. The chipset is CMD680. This chipset is allready known
> from linux, but it seems there is no way to get an hardware array
> working. Maybe I'm to dumb to do it. I don't know, how to write a driver
> or a patch.
>
unfortunately I haven't had access to a cmd680 ataraid array so haven't
been able to write a driver so far
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-11-08 9:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-07 13:30 Support for ATARAID-Card with CMD680 chipset Mike Greubel
2002-11-08 9:23 ` Arjan van de Ven
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox