[PATCH v6 0/5] Increase max timeout value of s3c2410 watchdog

[PATCH v6 0/5] Increase max timeout value of s3c2410 watchdog

[Sangwook Shin]

The ExynosAutoV9 and ExynosAutoV920 SoCs have a 32-bit counter register,
but due to code constraints, only 16-bit values could be used.
This series enables these SoCs to use the 32-bit counter.
Additionally, it addresses the issue where the ExynosAutoV9 SoC supports
the DBGACK bit but it was not set.

V5->V6:
  - Replace hard-coded 0x8000 with calculated value.
  - Link to v5:
    https://lore.kernel.org/linux-watchdog/20250806065514.3688485-1-sw617.shin@samsung.com/

V4->V5:
  - Update s3c2410wdt_max_timeout with Sam Protsenko and Guenter Roeck's sugestion.
  - Break [v4 3/4] into two [v5 3/5] and [v5 4/5].
  - Rename S3C2410_WTCNT_MAXCNT to S3C2410_WTCNT_MAXCNT_16.
  - Rename QUIRK_HAS_32BIT_MAXCNT to QUIRK_HAS_32BIT_CNT.
  - Minor Typographical Errors and Style Adjustments.
  - Link to v4:
    https://lore.kernel.org/linux-watchdog/20250724080854.3866566-1-sw617.shin@samsung.com/

V3->V4:
  - Merge patches [v3 3/5] and [v3 4/5] into one so that Quirk and its consumer
    are part of the same patch.
  - Link to v3:
    https://lore.kernel.org/linux-watchdog/20250714055440.3138135-1-sw617.shin@samsung.com/
    https://lore.kernel.org/linux-watchdog/20250515075350.3368635-1-sw617.shin@samsung.com/

V2->V3:
  - Correct the incorrect tag information.
  - Link to v2:
    https://lore.kernel.org/linux-watchdog/20250514094220.1561378-1-sw617.shin@samsung.com/

V1->V2:
  - Modify the max_timeout calculation considering overflow
  - Separate tha max_timeout calculation into a separate patch
  - Add max_cnt in struct s3c2410_wdt
  - Set max_cnt once in probe function
  - Add patch that uses S3C2410_WTCON_PRESCALE_MAX instead of hardcoded one
  - Remove unnecessary inner parentheses
  - Link to v1:
    https://lore.kernel.org/linux-watchdog/20250513094711.2691059-1-sw617.shin@samsung.com/

Sangwook Shin (5):
  watchdog: s3c2410_wdt: Replace hardcoded values with macro definitions
  watchdog: s3c2410_wdt: Fix max_timeout being calculated larger
  watchdog: s3c2410_wdt: Increase max timeout value of watchdog
  watchdog: s3c2410_wdt: exynosautov920: Enable QUIRK_HAS_32BIT_CNT
  watchdog: s3c2410_wdt: exynosautov9: Enable supported features

 drivers/watchdog/s3c2410_wdt.c | 46 ++++++++++++++++++++++++----------
 1 file changed, 33 insertions(+), 13 deletions(-)

-- 
2.25.1

[PATCH v6 1/5] watchdog: s3c2410_wdt: Replace hardcoded values with macro definitions

[Sangwook Shin]

Modify the code to utilize macro-defined values instead of hardcoded
values. The value 0x100 in the s3c2410wdt_set_heartbeat function represents
S3C2410_WTCON_PRESCALE_MAX + 1, but it is hardcoded, making its meaning
difficult to understand and reducing code readability.

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
---
 drivers/watchdog/s3c2410_wdt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 40901bdac426..95f7207e390a 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -587,7 +587,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
 	if (count >= 0x10000) {
 		divisor = DIV_ROUND_UP(count, 0xffff);
 
-		if (divisor > 0x100) {
+		if (divisor > S3C2410_WTCON_PRESCALE_MAX + 1) {
 			dev_err(wdt->dev, "timeout %d too big\n", timeout);
 			return -EINVAL;
 		}
-- 
2.25.1

Re: [PATCH v6 1/5] watchdog: s3c2410_wdt: Replace hardcoded values with macro definitions

[Guenter Roeck]

On Mon, Aug 18, 2025 at 11:18:22AM +0900, Sangwook Shin wrote:
> Modify the code to utilize macro-defined values instead of hardcoded
> values. The value 0x100 in the s3c2410wdt_set_heartbeat function represents
> S3C2410_WTCON_PRESCALE_MAX + 1, but it is hardcoded, making its meaning
> difficult to understand and reducing code readability.
> 
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  drivers/watchdog/s3c2410_wdt.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 40901bdac426..95f7207e390a 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -587,7 +587,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
>  	if (count >= 0x10000) {
>  		divisor = DIV_ROUND_UP(count, 0xffff);
>  
> -		if (divisor > 0x100) {
> +		if (divisor > S3C2410_WTCON_PRESCALE_MAX + 1) {
>  			dev_err(wdt->dev, "timeout %d too big\n", timeout);
>  			return -EINVAL;
>  		}
> -- 
> 2.25.1
> 
> 

[PATCH v6 2/5] watchdog: s3c2410_wdt: Fix max_timeout being calculated larger

[Sangwook Shin]

Fix the issue of max_timeout being calculated larger than actual value.
The calculation result of freq / (S3C2410_WTCON_PRESCALE_MAX + 1) /
S3C2410_WTCON_MAXDIV is smaller than the actual value because the remainder
is discarded during the calculation process. This leads to a larger
calculated value for max_timeout compared to the actual settable value.
To resolve this issue, the order of calculations in the computation process
has been adjusted.

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
---
 drivers/watchdog/s3c2410_wdt.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 95f7207e390a..1e8cf0299713 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -27,6 +27,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include <linux/delay.h>
+#include <linux/math64.h>
 
 #define S3C2410_WTCON		0x00
 #define S3C2410_WTDAT		0x04
@@ -410,9 +411,14 @@ static inline unsigned long s3c2410wdt_get_freq(struct s3c2410_wdt *wdt)
 static inline unsigned int s3c2410wdt_max_timeout(struct s3c2410_wdt *wdt)
 {
 	const unsigned long freq = s3c2410wdt_get_freq(wdt);
+	const u64 n_max = (u64)(S3C2410_WTCON_PRESCALE_MAX + 1) *
+			S3C2410_WTCON_MAXDIV * S3C2410_WTCNT_MAXCNT;
+	u64 t_max = div64_ul(n_max, freq);
 
-	return S3C2410_WTCNT_MAXCNT / (freq / (S3C2410_WTCON_PRESCALE_MAX + 1)
-				       / S3C2410_WTCON_MAXDIV);
+	if (t_max > UINT_MAX)
+		t_max = UINT_MAX;
+
+	return t_max;
 }
 
 static int s3c2410wdt_disable_wdt_reset(struct s3c2410_wdt *wdt, bool mask)
-- 
2.25.1

Re: [PATCH v6 2/5] watchdog: s3c2410_wdt: Fix max_timeout being calculated larger

[Sam Protsenko]

On Sun, Aug 17, 2025 at 9:24 PM Sangwook Shin <sw617.shin@samsung.com> wrote:
>
> Fix the issue of max_timeout being calculated larger than actual value.
> The calculation result of freq / (S3C2410_WTCON_PRESCALE_MAX + 1) /
> S3C2410_WTCON_MAXDIV is smaller than the actual value because the remainder
> is discarded during the calculation process. This leads to a larger
> calculated value for max_timeout compared to the actual settable value.
> To resolve this issue, the order of calculations in the computation process
> has been adjusted.
>
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
> ---
>  drivers/watchdog/s3c2410_wdt.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 95f7207e390a..1e8cf0299713 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -27,6 +27,7 @@
>  #include <linux/mfd/syscon.h>
>  #include <linux/regmap.h>
>  #include <linux/delay.h>
> +#include <linux/math64.h>
>
>  #define S3C2410_WTCON          0x00
>  #define S3C2410_WTDAT          0x04
> @@ -410,9 +411,14 @@ static inline unsigned long s3c2410wdt_get_freq(struct s3c2410_wdt *wdt)
>  static inline unsigned int s3c2410wdt_max_timeout(struct s3c2410_wdt *wdt)
>  {
>         const unsigned long freq = s3c2410wdt_get_freq(wdt);
> +       const u64 n_max = (u64)(S3C2410_WTCON_PRESCALE_MAX + 1) *
> +                       S3C2410_WTCON_MAXDIV * S3C2410_WTCNT_MAXCNT;
> +       u64 t_max = div64_ul(n_max, freq);
>
> -       return S3C2410_WTCNT_MAXCNT / (freq / (S3C2410_WTCON_PRESCALE_MAX + 1)
> -                                      / S3C2410_WTCON_MAXDIV);
> +       if (t_max > UINT_MAX)
> +               t_max = UINT_MAX;
> +
> +       return t_max;
>  }
>

Thanks for working on this, Sangwook! It looks much better now.

>  static int s3c2410wdt_disable_wdt_reset(struct s3c2410_wdt *wdt, bool mask)
> --
> 2.25.1
>

Re: [PATCH v6 2/5] watchdog: s3c2410_wdt: Fix max_timeout being calculated larger

[Guenter Roeck]

On Mon, Aug 18, 2025 at 11:18:23AM +0900, Sangwook Shin wrote:
> Fix the issue of max_timeout being calculated larger than actual value.
> The calculation result of freq / (S3C2410_WTCON_PRESCALE_MAX + 1) /
> S3C2410_WTCON_MAXDIV is smaller than the actual value because the remainder
> is discarded during the calculation process. This leads to a larger
> calculated value for max_timeout compared to the actual settable value.
> To resolve this issue, the order of calculations in the computation process
> has been adjusted.
> 
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  drivers/watchdog/s3c2410_wdt.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 95f7207e390a..1e8cf0299713 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -27,6 +27,7 @@
>  #include <linux/mfd/syscon.h>
>  #include <linux/regmap.h>
>  #include <linux/delay.h>
> +#include <linux/math64.h>
>  
>  #define S3C2410_WTCON		0x00
>  #define S3C2410_WTDAT		0x04
> @@ -410,9 +411,14 @@ static inline unsigned long s3c2410wdt_get_freq(struct s3c2410_wdt *wdt)
>  static inline unsigned int s3c2410wdt_max_timeout(struct s3c2410_wdt *wdt)
>  {
>  	const unsigned long freq = s3c2410wdt_get_freq(wdt);
> +	const u64 n_max = (u64)(S3C2410_WTCON_PRESCALE_MAX + 1) *
> +			S3C2410_WTCON_MAXDIV * S3C2410_WTCNT_MAXCNT;
> +	u64 t_max = div64_ul(n_max, freq);
>  
> -	return S3C2410_WTCNT_MAXCNT / (freq / (S3C2410_WTCON_PRESCALE_MAX + 1)
> -				       / S3C2410_WTCON_MAXDIV);
> +	if (t_max > UINT_MAX)
> +		t_max = UINT_MAX;
> +
> +	return t_max;
>  }
>  
>  static int s3c2410wdt_disable_wdt_reset(struct s3c2410_wdt *wdt, bool mask)
> -- 
> 2.25.1
> 
> 

RE: [PATCH v6 2/5] watchdog: s3c2410_wdt: Fix max_timeout being calculated larger

[Alim Akhtar]

Hi Sangwook

> -----Original Message-----
> From: Sangwook Shin <sw617.shin@samsung.com>
> Sent: Monday, August 18, 2025 7:48 AM
> To: krzk@kernel.org; alim.akhtar@samsung.com; wim@linux-watchdog.org;
> linux@roeck-us.net; semen.protsenko@linaro.org;
> dongil01.park@samsung.com; khwan.seo@samsung.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-samsung-soc@vger.kernel.org;
> linux-watchdog@vger.kernel.org; linux-kernel@vger.kernel.org; Sangwook Shin
> <sw617.shin@samsung.com>
> Subject: [PATCH v6 2/5] watchdog: s3c2410_wdt: Fix max_timeout being
> calculated larger
> 
> Fix the issue of max_timeout being calculated larger than actual value.
> The calculation result of freq / (S3C2410_WTCON_PRESCALE_MAX + 1) /
> S3C2410_WTCON_MAXDIV is smaller than the actual value because the
> remainder is discarded during the calculation process. This leads to a larger
> calculated value for max_timeout compared to the actual settable value.
> To resolve this issue, the order of calculations in the computation process has
> been adjusted.
> 
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
> ---
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>

[PATCH v6 3/5] watchdog: s3c2410_wdt: Increase max timeout value of watchdog

[Sangwook Shin]

Increase max_timeout value from 55s to 3665038s (1018h 3min 58s) with
38400000 frequency system if the system has 32-bit WTCNT register.

cat /sys/class/watchdog/watchdog0/max_timeout
3665038

[    0.330082] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: count=1099511400000, timeout=3665038, freq=300000
[    0.330087] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: timeout=3665038, divisor=256, count=1099511400000 (fffffc87)
[    0.330127] s3c2410-wdt 10060000.watchdog_cl0: starting watchdog timer
[    0.330134] s3c2410-wdt 10060000.watchdog_cl0: Starting watchdog: count=0xfffffc87, wtcon=0001ff39
[    0.330319] s3c2410-wdt 10060000.watchdog_cl0: watchdog active, reset enabled, irq disabled

If the system has a 32-bit WTCNT, add QUIRK_HAS_32BIT_CNT to its quirk flags,
and it will operate with a 32-bit counter. If not, it will operate with a 16-bit
counter like in the previous version.

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
---
 drivers/watchdog/s3c2410_wdt.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 1e8cf0299713..d983cbcb975c 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -34,7 +34,8 @@
 #define S3C2410_WTCNT		0x08
 #define S3C2410_WTCLRINT	0x0c
 
-#define S3C2410_WTCNT_MAXCNT	0xffff
+#define S3C2410_WTCNT_MAXCNT_16	0xffff
+#define S3C2410_WTCNT_MAXCNT_32	0xffffffff
 
 #define S3C2410_WTCON_RSTEN		BIT(0)
 #define S3C2410_WTCON_INTEN		BIT(2)
@@ -124,6 +125,10 @@
  * %QUIRK_HAS_DBGACK_BIT: WTCON register has DBGACK_MASK bit. Setting the
  * DBGACK_MASK bit disables the watchdog outputs when the SoC is in debug mode.
  * Debug mode is determined by the DBGACK CPU signal.
+ *
+ * %QUIRK_HAS_32BIT_CNT: WTDAT and WTCNT are 32-bit registers. With these
+ * 32-bit registers, larger values will be set, which means that larger timeouts
+ * value can be set.
  */
 #define QUIRK_HAS_WTCLRINT_REG			BIT(0)
 #define QUIRK_HAS_PMU_MASK_RESET		BIT(1)
@@ -131,6 +136,7 @@
 #define QUIRK_HAS_PMU_AUTO_DISABLE		BIT(3)
 #define QUIRK_HAS_PMU_CNT_EN			BIT(4)
 #define QUIRK_HAS_DBGACK_BIT			BIT(5)
+#define QUIRK_HAS_32BIT_CNT			BIT(6)
 
 /* These quirks require that we have a PMU register map */
 #define QUIRKS_HAVE_PMUREG \
@@ -199,6 +205,7 @@ struct s3c2410_wdt {
 	struct notifier_block	freq_transition;
 	const struct s3c2410_wdt_variant *drv_data;
 	struct regmap *pmureg;
+	u32 max_cnt;
 };
 
 static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
@@ -412,7 +419,7 @@ static inline unsigned int s3c2410wdt_max_timeout(struct s3c2410_wdt *wdt)
 {
 	const unsigned long freq = s3c2410wdt_get_freq(wdt);
 	const u64 n_max = (u64)(S3C2410_WTCON_PRESCALE_MAX + 1) *
-			S3C2410_WTCON_MAXDIV * S3C2410_WTCNT_MAXCNT;
+			S3C2410_WTCON_MAXDIV * wdt->max_cnt;
 	u64 t_max = div64_ul(n_max, freq);
 
 	if (t_max > UINT_MAX)
@@ -572,7 +579,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
 {
 	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
 	unsigned long freq = s3c2410wdt_get_freq(wdt);
-	unsigned int count;
+	unsigned long count;
 	unsigned int divisor = 1;
 	unsigned long wtcon;
 
@@ -582,7 +589,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
 	freq = DIV_ROUND_UP(freq, 128);
 	count = timeout * freq;
 
-	dev_dbg(wdt->dev, "Heartbeat: count=%d, timeout=%d, freq=%lu\n",
+	dev_dbg(wdt->dev, "Heartbeat: count=%lu, timeout=%d, freq=%lu\n",
 		count, timeout, freq);
 
 	/* if the count is bigger than the watchdog register,
@@ -590,8 +597,8 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
 	   actually make this value
 	*/
 
-	if (count >= 0x10000) {
-		divisor = DIV_ROUND_UP(count, 0xffff);
+	if (count > wdt->max_cnt) {
+		divisor = DIV_ROUND_UP(count, wdt->max_cnt);
 
 		if (divisor > S3C2410_WTCON_PRESCALE_MAX + 1) {
 			dev_err(wdt->dev, "timeout %d too big\n", timeout);
@@ -599,7 +606,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
 		}
 	}
 
-	dev_dbg(wdt->dev, "Heartbeat: timeout=%d, divisor=%d, count=%d (%08x)\n",
+	dev_dbg(wdt->dev, "Heartbeat: timeout=%d, divisor=%d, count=%lu (%08lx)\n",
 		timeout, divisor, count, DIV_ROUND_UP(count, divisor));
 
 	count = DIV_ROUND_UP(count, divisor);
@@ -807,6 +814,11 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(wdt->src_clk))
 		return dev_err_probe(dev, PTR_ERR(wdt->src_clk), "failed to get source clock\n");
 
+	if (wdt->drv_data->quirks & QUIRK_HAS_32BIT_CNT)
+		wdt->max_cnt = S3C2410_WTCNT_MAXCNT_32;
+	else
+		wdt->max_cnt = S3C2410_WTCNT_MAXCNT_16;
+
 	wdt->wdt_device.min_timeout = 1;
 	wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt);
 
-- 
2.25.1

Re: [PATCH v6 3/5] watchdog: s3c2410_wdt: Increase max timeout value of watchdog

[Guenter Roeck]

On Mon, Aug 18, 2025 at 11:18:24AM +0900, Sangwook Shin wrote:
> Increase max_timeout value from 55s to 3665038s (1018h 3min 58s) with
> 38400000 frequency system if the system has 32-bit WTCNT register.
> 
> cat /sys/class/watchdog/watchdog0/max_timeout
> 3665038
> 
> [    0.330082] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: count=1099511400000, timeout=3665038, freq=300000
> [    0.330087] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: timeout=3665038, divisor=256, count=1099511400000 (fffffc87)
> [    0.330127] s3c2410-wdt 10060000.watchdog_cl0: starting watchdog timer
> [    0.330134] s3c2410-wdt 10060000.watchdog_cl0: Starting watchdog: count=0xfffffc87, wtcon=0001ff39
> [    0.330319] s3c2410-wdt 10060000.watchdog_cl0: watchdog active, reset enabled, irq disabled
> 
> If the system has a 32-bit WTCNT, add QUIRK_HAS_32BIT_CNT to its quirk flags,
> and it will operate with a 32-bit counter. If not, it will operate with a 16-bit
> counter like in the previous version.
> 
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  drivers/watchdog/s3c2410_wdt.c | 26 +++++++++++++++++++-------
>  1 file changed, 19 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 1e8cf0299713..d983cbcb975c 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -34,7 +34,8 @@
>  #define S3C2410_WTCNT		0x08
>  #define S3C2410_WTCLRINT	0x0c
>  
> -#define S3C2410_WTCNT_MAXCNT	0xffff
> +#define S3C2410_WTCNT_MAXCNT_16	0xffff
> +#define S3C2410_WTCNT_MAXCNT_32	0xffffffff
>  
>  #define S3C2410_WTCON_RSTEN		BIT(0)
>  #define S3C2410_WTCON_INTEN		BIT(2)
> @@ -124,6 +125,10 @@
>   * %QUIRK_HAS_DBGACK_BIT: WTCON register has DBGACK_MASK bit. Setting the
>   * DBGACK_MASK bit disables the watchdog outputs when the SoC is in debug mode.
>   * Debug mode is determined by the DBGACK CPU signal.
> + *
> + * %QUIRK_HAS_32BIT_CNT: WTDAT and WTCNT are 32-bit registers. With these
> + * 32-bit registers, larger values will be set, which means that larger timeouts
> + * value can be set.
>   */
>  #define QUIRK_HAS_WTCLRINT_REG			BIT(0)
>  #define QUIRK_HAS_PMU_MASK_RESET		BIT(1)
> @@ -131,6 +136,7 @@
>  #define QUIRK_HAS_PMU_AUTO_DISABLE		BIT(3)
>  #define QUIRK_HAS_PMU_CNT_EN			BIT(4)
>  #define QUIRK_HAS_DBGACK_BIT			BIT(5)
> +#define QUIRK_HAS_32BIT_CNT			BIT(6)
>  
>  /* These quirks require that we have a PMU register map */
>  #define QUIRKS_HAVE_PMUREG \
> @@ -199,6 +205,7 @@ struct s3c2410_wdt {
>  	struct notifier_block	freq_transition;
>  	const struct s3c2410_wdt_variant *drv_data;
>  	struct regmap *pmureg;
> +	u32 max_cnt;
>  };
>  
>  static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
> @@ -412,7 +419,7 @@ static inline unsigned int s3c2410wdt_max_timeout(struct s3c2410_wdt *wdt)
>  {
>  	const unsigned long freq = s3c2410wdt_get_freq(wdt);
>  	const u64 n_max = (u64)(S3C2410_WTCON_PRESCALE_MAX + 1) *
> -			S3C2410_WTCON_MAXDIV * S3C2410_WTCNT_MAXCNT;
> +			S3C2410_WTCON_MAXDIV * wdt->max_cnt;
>  	u64 t_max = div64_ul(n_max, freq);
>  
>  	if (t_max > UINT_MAX)
> @@ -572,7 +579,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
>  {
>  	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
>  	unsigned long freq = s3c2410wdt_get_freq(wdt);
> -	unsigned int count;
> +	unsigned long count;
>  	unsigned int divisor = 1;
>  	unsigned long wtcon;
>  
> @@ -582,7 +589,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
>  	freq = DIV_ROUND_UP(freq, 128);
>  	count = timeout * freq;
>  
> -	dev_dbg(wdt->dev, "Heartbeat: count=%d, timeout=%d, freq=%lu\n",
> +	dev_dbg(wdt->dev, "Heartbeat: count=%lu, timeout=%d, freq=%lu\n",
>  		count, timeout, freq);
>  
>  	/* if the count is bigger than the watchdog register,
> @@ -590,8 +597,8 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
>  	   actually make this value
>  	*/
>  
> -	if (count >= 0x10000) {
> -		divisor = DIV_ROUND_UP(count, 0xffff);
> +	if (count > wdt->max_cnt) {
> +		divisor = DIV_ROUND_UP(count, wdt->max_cnt);
>  
>  		if (divisor > S3C2410_WTCON_PRESCALE_MAX + 1) {
>  			dev_err(wdt->dev, "timeout %d too big\n", timeout);
> @@ -599,7 +606,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
>  		}
>  	}
>  
> -	dev_dbg(wdt->dev, "Heartbeat: timeout=%d, divisor=%d, count=%d (%08x)\n",
> +	dev_dbg(wdt->dev, "Heartbeat: timeout=%d, divisor=%d, count=%lu (%08lx)\n",
>  		timeout, divisor, count, DIV_ROUND_UP(count, divisor));
>  
>  	count = DIV_ROUND_UP(count, divisor);
> @@ -807,6 +814,11 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
>  	if (IS_ERR(wdt->src_clk))
>  		return dev_err_probe(dev, PTR_ERR(wdt->src_clk), "failed to get source clock\n");
>  
> +	if (wdt->drv_data->quirks & QUIRK_HAS_32BIT_CNT)
> +		wdt->max_cnt = S3C2410_WTCNT_MAXCNT_32;
> +	else
> +		wdt->max_cnt = S3C2410_WTCNT_MAXCNT_16;
> +
>  	wdt->wdt_device.min_timeout = 1;
>  	wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt);
>  
> -- 
> 2.25.1
> 
> 

RE: [PATCH v6 3/5] watchdog: s3c2410_wdt: Increase max timeout value of watchdog

[Alim Akhtar]

Hi Sangwook

> -----Original Message-----
> From: Sangwook Shin <sw617.shin@samsung.com>
> Sent: Monday, August 18, 2025 7:48 AM
> To: krzk@kernel.org; alim.akhtar@samsung.com; wim@linux-watchdog.org;
> linux@roeck-us.net; semen.protsenko@linaro.org;
> dongil01.park@samsung.com; khwan.seo@samsung.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-samsung-soc@vger.kernel.org;
> linux-watchdog@vger.kernel.org; linux-kernel@vger.kernel.org; Sangwook Shin
> <sw617.shin@samsung.com>
> Subject: [PATCH v6 3/5] watchdog: s3c2410_wdt: Increase max timeout value of
> watchdog
> 
> Increase max_timeout value from 55s to 3665038s (1018h 3min 58s) with
> 38400000 frequency system if the system has 32-bit WTCNT register.
> 
> cat /sys/class/watchdog/watchdog0/max_timeout
> 3665038
> 
> [    0.330082] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat:
> count=1099511400000, timeout=3665038, freq=300000
> [    0.330087] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat:
> timeout=3665038, divisor=256, count=1099511400000 (fffffc87)
> [    0.330127] s3c2410-wdt 10060000.watchdog_cl0: starting watchdog timer
> [    0.330134] s3c2410-wdt 10060000.watchdog_cl0: Starting watchdog:
> count=0xfffffc87, wtcon=0001ff39
> [    0.330319] s3c2410-wdt 10060000.watchdog_cl0: watchdog active, reset
> enabled, irq disabled
> 
> If the system has a 32-bit WTCNT, add QUIRK_HAS_32BIT_CNT to its quirk flags,
> and it will operate with a 32-bit counter. If not, it will operate with a 16-bit
> counter like in the previous version.
> 
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
> ---

Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>

[PATCH v6 4/5] watchdog: s3c2410_wdt: exynosautov920: Enable QUIRK_HAS_32BIT_CNT

[Sangwook Shin]

Enable QUIRK_HAS_32BIT_CNT to ExynosAutov920 SoC which has 32-bit WTCNT.

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
---
 drivers/watchdog/s3c2410_wdt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index d983cbcb975c..915d3c88565a 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -357,7 +357,7 @@ static const struct s3c2410_wdt_variant drv_data_exynosautov920_cl0 = {
 	.cnt_en_bit = 8,
 	.quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET |
 		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN |
-		  QUIRK_HAS_DBGACK_BIT,
+		  QUIRK_HAS_DBGACK_BIT | QUIRK_HAS_32BIT_CNT,
 };
 
 static const struct s3c2410_wdt_variant drv_data_exynosautov920_cl1 = {
@@ -370,7 +370,7 @@ static const struct s3c2410_wdt_variant drv_data_exynosautov920_cl1 = {
 	.cnt_en_bit = 8,
 	.quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET |
 		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN |
-		  QUIRK_HAS_DBGACK_BIT,
+		  QUIRK_HAS_DBGACK_BIT | QUIRK_HAS_32BIT_CNT,
 };
 
 static const struct of_device_id s3c2410_wdt_match[] = {
-- 
2.25.1

Re: [PATCH v6 4/5] watchdog: s3c2410_wdt: exynosautov920: Enable QUIRK_HAS_32BIT_CNT

[Guenter Roeck]

On Mon, Aug 18, 2025 at 11:18:25AM +0900, Sangwook Shin wrote:
> Enable QUIRK_HAS_32BIT_CNT to ExynosAutov920 SoC which has 32-bit WTCNT.
> 
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  drivers/watchdog/s3c2410_wdt.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index d983cbcb975c..915d3c88565a 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -357,7 +357,7 @@ static const struct s3c2410_wdt_variant drv_data_exynosautov920_cl0 = {
>  	.cnt_en_bit = 8,
>  	.quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET |
>  		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN |
> -		  QUIRK_HAS_DBGACK_BIT,
> +		  QUIRK_HAS_DBGACK_BIT | QUIRK_HAS_32BIT_CNT,
>  };
>  
>  static const struct s3c2410_wdt_variant drv_data_exynosautov920_cl1 = {
> @@ -370,7 +370,7 @@ static const struct s3c2410_wdt_variant drv_data_exynosautov920_cl1 = {
>  	.cnt_en_bit = 8,
>  	.quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET |
>  		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN |
> -		  QUIRK_HAS_DBGACK_BIT,
> +		  QUIRK_HAS_DBGACK_BIT | QUIRK_HAS_32BIT_CNT,
>  };
>  
>  static const struct of_device_id s3c2410_wdt_match[] = {
> -- 
> 2.25.1
> 

RE: [PATCH v6 4/5] watchdog: s3c2410_wdt: exynosautov920: Enable QUIRK_HAS_32BIT_CNT

[Alim Akhtar]

Hi Sangwook

> -----Original Message-----
> From: Sangwook Shin <sw617.shin@samsung.com>
> Sent: Monday, August 18, 2025 7:48 AM
> To: krzk@kernel.org; alim.akhtar@samsung.com; wim@linux-watchdog.org;
> linux@roeck-us.net; semen.protsenko@linaro.org;
> dongil01.park@samsung.com; khwan.seo@samsung.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-samsung-soc@vger.kernel.org;
> linux-watchdog@vger.kernel.org; linux-kernel@vger.kernel.org; Sangwook Shin
> <sw617.shin@samsung.com>
> Subject: [PATCH v6 4/5] watchdog: s3c2410_wdt: exynosautov920: Enable
> QUIRK_HAS_32BIT_CNT
> 
> Enable QUIRK_HAS_32BIT_CNT to ExynosAutov920 SoC which has 32-bit
> WTCNT.
> 
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
> ---
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>

[PATCH v6 5/5] watchdog: s3c2410_wdt: exynosautov9: Enable supported features

[Sangwook Shin]

Enable supported features for ExynosAutov9 SoC.
- QUIRK_HAS_DBGACK_BIT
- QUIRK_HAS_32BIT_CNT

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
---
 drivers/watchdog/s3c2410_wdt.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 915d3c88565a..b774477190b6 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -306,7 +306,8 @@ static const struct s3c2410_wdt_variant drv_data_exynosautov9_cl0 = {
 	.cnt_en_reg = EXYNOS850_CLUSTER0_NONCPU_OUT,
 	.cnt_en_bit = 7,
 	.quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET |
-		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN,
+		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN |
+		  QUIRK_HAS_DBGACK_BIT | QUIRK_HAS_32BIT_CNT,
 };
 
 static const struct s3c2410_wdt_variant drv_data_exynosautov9_cl1 = {
@@ -318,7 +319,8 @@ static const struct s3c2410_wdt_variant drv_data_exynosautov9_cl1 = {
 	.cnt_en_reg = EXYNOSAUTOV9_CLUSTER1_NONCPU_OUT,
 	.cnt_en_bit = 7,
 	.quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET |
-		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN,
+		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN |
+		  QUIRK_HAS_DBGACK_BIT | QUIRK_HAS_32BIT_CNT,
 };
 
 static const struct s3c2410_wdt_variant drv_data_gs101_cl0 = {
-- 
2.25.1

Re: [PATCH v6 5/5] watchdog: s3c2410_wdt: exynosautov9: Enable supported features

[Guenter Roeck]

On Mon, Aug 18, 2025 at 11:18:26AM +0900, Sangwook Shin wrote:
> Enable supported features for ExynosAutov9 SoC.
> - QUIRK_HAS_DBGACK_BIT
> - QUIRK_HAS_32BIT_CNT
> 
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  drivers/watchdog/s3c2410_wdt.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 915d3c88565a..b774477190b6 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -306,7 +306,8 @@ static const struct s3c2410_wdt_variant drv_data_exynosautov9_cl0 = {
>  	.cnt_en_reg = EXYNOS850_CLUSTER0_NONCPU_OUT,
>  	.cnt_en_bit = 7,
>  	.quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET |
> -		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN,
> +		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN |
> +		  QUIRK_HAS_DBGACK_BIT | QUIRK_HAS_32BIT_CNT,
>  };
>  
>  static const struct s3c2410_wdt_variant drv_data_exynosautov9_cl1 = {
> @@ -318,7 +319,8 @@ static const struct s3c2410_wdt_variant drv_data_exynosautov9_cl1 = {
>  	.cnt_en_reg = EXYNOSAUTOV9_CLUSTER1_NONCPU_OUT,
>  	.cnt_en_bit = 7,
>  	.quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET |
> -		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN,
> +		  QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN |
> +		  QUIRK_HAS_DBGACK_BIT | QUIRK_HAS_32BIT_CNT,
>  };
>  
>  static const struct s3c2410_wdt_variant drv_data_gs101_cl0 = {
> -- 
> 2.25.1
> 
> 

RE: [PATCH v6 5/5] watchdog: s3c2410_wdt: exynosautov9: Enable supported features

[Alim Akhtar]

Hi Sangwook

> -----Original Message-----
> From: Sangwook Shin <sw617.shin@samsung.com>
> Sent: Monday, August 18, 2025 7:48 AM
> To: krzk@kernel.org; alim.akhtar@samsung.com; wim@linux-watchdog.org;
> linux@roeck-us.net; semen.protsenko@linaro.org;
> dongil01.park@samsung.com; khwan.seo@samsung.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-samsung-soc@vger.kernel.org;
> linux-watchdog@vger.kernel.org; linux-kernel@vger.kernel.org; Sangwook Shin
> <sw617.shin@samsung.com>
> Subject: [PATCH v6 5/5] watchdog: s3c2410_wdt: exynosautov9: Enable
> supported features
> 
> Enable supported features for ExynosAutov9 SoC.
> - QUIRK_HAS_DBGACK_BIT
> - QUIRK_HAS_32BIT_CNT
> 
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
> ---
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>