* Re: IDE hotswap still broken in 2.4.17pre2...
@ 2001-12-07 15:57 Thomas Hood
0 siblings, 0 replies; 2+ messages in thread
From: Thomas Hood @ 2001-12-07 15:57 UTC (permalink / raw)
To: linux-kernel
This has never worked for me when I have tried it.
Attempts to "hdparm -R" and "hdparm -U" repeatedly
always eventually crash the kernel ... sometimes after
three or four iterations.
^ permalink raw reply [flat|nested] 2+ messages in thread
* kernel oops on "hdparm -R"
@ 2001-11-05 19:09 PALLAI Roland
2001-12-07 15:43 ` IDE hotswap still broken in 2.4.17pre2 Pallai Roland
0 siblings, 1 reply; 2+ messages in thread
From: PALLAI Roland @ 2001-11-05 19:09 UTC (permalink / raw)
To: linux-kernel
When I try to add a new IDE disk to the channel 1 with the command
"hdparm -R 0x170 0 0 /dev/hda", I've got a kernel oops (and freeze)..
It's works fine _once_, if there wasn't any detected disk on channel
before.
my config:
kernel 2.4.9 - 2.4.14pre7 (I've tried many of them)
PIIX and VIA motherboards (shows same error)
--
DaP
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-12-07 15:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-12-07 15:57 IDE hotswap still broken in 2.4.17pre2 Thomas Hood
-- strict thread matches above, loose matches on Subject: below --
2001-11-05 19:09 kernel oops on "hdparm -R" PALLAI Roland
2001-12-07 15:43 ` IDE hotswap still broken in 2.4.17pre2 Pallai Roland
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox