2.4.21-rc7 AMD64 dpt_i2o fails compile

[Warren Togami <warren@togami.com>]

On Wed, 2003-06-04 at 19:08, Bill Nottingham wrote:
> Warren Togami (warren@togami.com) said: 
> > My two Tyan S2880GNR dual Opteron servers came in today.  Sweet!
> > 
> > Unfortunately the Adaptec 2110S SCSI RAID controllers within both
> > servers are unable to work with any of the drivers in GinGin64's
> > Anaconda.  Searching the net it seems that this controller needs the
> > dpt_i2o module which exists in Shrike, but not in GinGin64's kernel. 
> > Were there problems with that module in AMD64?
> > 
> > http://www.togami.com/~warren/archive/2003/tyan_opteron.txt
> > lspci, lspci -n, lspci -vvv
> > 
> > I'm installing onto an IDE hard drive now and plan on building custom
> > kernels from there.
> > 
> > Any recommendations of things to try?
> 
> Rebuild the kernel with the driver, see what happens. I don't think
> we've tested that driver here to confirm whether it does or doesn't
> have problems.
> 

http://www.togami.com/~warren/archive/2003/dpt_failure.txt
2.4.20-9.2 (GinGin64)
Build failure when dpt is enabled as a module.  This is probably why
this and many other kernel modules were not included in the GinGin64
preview release.

Unfortunately it fails compilation in the same place for 2.4.21-rc7. 
I'm testing 2.5.70-bk* next.

LKML, any existing patches for this dpt_i2o module AMD64 compilation
issue?  Please CC me because not currently subscribed to lkml.

Thanks,
Warren Togami
warren@togami.com