* 2.4.22 hangs with pcmcia and linux-wlan @ 2003-08-25 23:00 Christian Hesse 2003-08-26 3:37 ` Hmamouche, Youssef 0 siblings, 1 reply; 6+ messages in thread From: Christian Hesse @ 2003-08-25 23:00 UTC (permalink / raw) To: linux-kernel Hi, I'm running kernels with pcmcia-cs-3.2.4 and linux-wlan-ng-0.2.1-pre11 (also tried 0.2). With 2.4.22-rc3 to final the system hangs if I insert my LevelOne WPC-0100 (Prism-II-base wlan), no output at all. Everything worked well up to and including 2.4.22-rc2. Regards, Christian ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.4.22 hangs with pcmcia and linux-wlan 2003-08-25 23:00 2.4.22 hangs with pcmcia and linux-wlan Christian Hesse @ 2003-08-26 3:37 ` Hmamouche, Youssef 2003-08-26 3:45 ` Nigel Cunningham 0 siblings, 1 reply; 6+ messages in thread From: Hmamouche, Youssef @ 2003-08-26 3:37 UTC (permalink / raw) To: Christian Hesse; +Cc: linux-kernel Out of curiosity, what happens when you remove the card? Does the system come back to normal or does it stay in the same state? Youssef On Tue, 26 Aug 2003, Christian Hesse wrote: > Hi, > > I'm running kernels with pcmcia-cs-3.2.4 and linux-wlan-ng-0.2.1-pre11 (also > tried 0.2). With 2.4.22-rc3 to final the system hangs if I insert my LevelOne > WPC-0100 (Prism-II-base wlan), no output at all. Everything worked well up to > and including 2.4.22-rc2. > > Regards, > Christian > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.4.22 hangs with pcmcia and linux-wlan 2003-08-26 3:37 ` Hmamouche, Youssef @ 2003-08-26 3:45 ` Nigel Cunningham 2003-08-26 4:11 ` Willy Tarreau 0 siblings, 1 reply; 6+ messages in thread From: Nigel Cunningham @ 2003-08-26 3:45 UTC (permalink / raw) To: Hmamouche, Youssef; +Cc: Christian Hesse, Linux Kernel Mailing List Hi. Similar results here, except I can be more specific. I see the issue using pcmcia only. The package I'm using is the external-to-the-kernel-tree pcmcia-cs-3.2.3. Under 2.4.22, I get a complete freeze (no SysRq, no flashing cursor) when I insmod i82365.o. I tried recompiling the whole kernel & modules using gcc 2.96 and 3.2 to no avail. If I use the kernel tree's code, I can insmod okay, but my ltmodem_cs driver reports the modem as being busy all the time. The problem was fixed by reverting to 2.4.21 (I'd already deleted pre2, which was working). No configuration changes required - just a recompile. Regards, Nigel On Tue, 2003-08-26 at 15:37, Hmamouche, Youssef wrote: > Out of curiosity, what happens when you remove the card? Does the system > come back to normal or does it stay in the same state? > > Youssef > > On Tue, 26 Aug 2003, Christian Hesse wrote: > > > Hi, > > > > I'm running kernels with pcmcia-cs-3.2.4 and linux-wlan-ng-0.2.1-pre11 (also > > tried 0.2). With 2.4.22-rc3 to final the system hangs if I insert my LevelOne > > WPC-0100 (Prism-II-base wlan), no output at all. Everything worked well up to > > and including 2.4.22-rc2. > > > > Regards, > > Christian > > > > - > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > > > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Nigel Cunningham 495 St Georges Road South, Hastings 4201, New Zealand You see, at just the right time, when we were still powerless, Christ died for the ungodly. -- Romans 5:6, NIV. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.4.22 hangs with pcmcia and linux-wlan 2003-08-26 3:45 ` Nigel Cunningham @ 2003-08-26 4:11 ` Willy Tarreau 2003-08-26 4:21 ` Nigel Cunningham 0 siblings, 1 reply; 6+ messages in thread From: Willy Tarreau @ 2003-08-26 4:11 UTC (permalink / raw) To: Nigel Cunningham Cc: Hmamouche, Youssef, Christian Hesse, Linux Kernel Mailing List Hi, I already encountered similar problems. Check if the PCMCIA slot is not on the same IRQ as ACPI in /proc/interrupts. You can also try to use a different PCMCIA slot, or boot with "acpi=off". Cheers, Willy On Tue, Aug 26, 2003 at 03:45:52PM +1200, Nigel Cunningham wrote: > Hi. > > Similar results here, except I can be more specific. I see the issue > using pcmcia only. The package I'm using is the > external-to-the-kernel-tree pcmcia-cs-3.2.3. Under 2.4.22, I get a > complete freeze (no SysRq, no flashing cursor) when I insmod i82365.o. I > tried recompiling the whole kernel & modules using gcc 2.96 and 3.2 to > no avail. If I use the kernel tree's code, I can insmod okay, but my > ltmodem_cs driver reports the modem as being busy all the time. The > problem was fixed by reverting to 2.4.21 (I'd already deleted pre2, > which was working). No configuration changes required - just a > recompile. > > Regards, > > Nigel > > On Tue, 2003-08-26 at 15:37, Hmamouche, Youssef wrote: > > Out of curiosity, what happens when you remove the card? Does the system > > come back to normal or does it stay in the same state? > > > > Youssef > > > > On Tue, 26 Aug 2003, Christian Hesse wrote: > > > > > Hi, > > > > > > I'm running kernels with pcmcia-cs-3.2.4 and linux-wlan-ng-0.2.1-pre11 (also > > > tried 0.2). With 2.4.22-rc3 to final the system hangs if I insert my LevelOne > > > WPC-0100 (Prism-II-base wlan), no output at all. Everything worked well up to > > > and including 2.4.22-rc2. > > > > > > Regards, > > > Christian > > > > > > - > > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > > the body of a message to majordomo@vger.kernel.org > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > Please read the FAQ at http://www.tux.org/lkml/ > > > > > > > - > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > -- > Nigel Cunningham > 495 St Georges Road South, Hastings 4201, New Zealand > > You see, at just the right time, when we were still powerless, > Christ died for the ungodly. > -- Romans 5:6, NIV. > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.4.22 hangs with pcmcia and linux-wlan 2003-08-26 4:11 ` Willy Tarreau @ 2003-08-26 4:21 ` Nigel Cunningham 2003-08-26 17:19 ` Christian Hesse 0 siblings, 1 reply; 6+ messages in thread From: Nigel Cunningham @ 2003-08-26 4:21 UTC (permalink / raw) To: Willy Tarreau Cc: Hmamouche, Youssef, Christian Hesse, Linux Kernel Mailing List Bingo. [root@laptop-linux src]# cat /proc/interrupts CPU0 0: 342407 XT-PIC timer 1: 9083 XT-PIC keyboard 2: 0 XT-PIC cascade 3: 509112 XT-PIC ltserial 5: 414 XT-PIC usb-uhci, usb-uhci, Allegro 8: 1 XT-PIC rtc 9: 1322 XT-PIC acpi, usb-uhci, i82365 10: 1623 XT-PIC eth0 12: 284866 XT-PIC PS/2 Mouse 14: 104489 XT-PIC ide0 15: 24 XT-PIC ide1 NMI: 0 LOC: 342373 ERR: 0 MIS: 0 [root@laptop-linux src]# Now I just need to learn how to get it to assign a different IRQ. Regards, Nigel On Tue, 2003-08-26 at 16:11, Willy Tarreau wrote: > Hi, > > I already encountered similar problems. > > Check if the PCMCIA slot is not on the same IRQ as ACPI in /proc/interrupts. You > can also try to use a different PCMCIA slot, or boot with "acpi=off". > > Cheers, > Willy > > On Tue, Aug 26, 2003 at 03:45:52PM +1200, Nigel Cunningham wrote: > > Hi. > > > > Similar results here, except I can be more specific. I see the issue > > using pcmcia only. The package I'm using is the > > external-to-the-kernel-tree pcmcia-cs-3.2.3. Under 2.4.22, I get a > > complete freeze (no SysRq, no flashing cursor) when I insmod i82365.o. I > > tried recompiling the whole kernel & modules using gcc 2.96 and 3.2 to > > no avail. If I use the kernel tree's code, I can insmod okay, but my > > ltmodem_cs driver reports the modem as being busy all the time. The > > problem was fixed by reverting to 2.4.21 (I'd already deleted pre2, > > which was working). No configuration changes required - just a > > recompile. > > > > Regards, > > > > Nigel > > > > On Tue, 2003-08-26 at 15:37, Hmamouche, Youssef wrote: > > > Out of curiosity, what happens when you remove the card? Does the system > > > come back to normal or does it stay in the same state? > > > > > > Youssef > > > > > > On Tue, 26 Aug 2003, Christian Hesse wrote: > > > > > > > Hi, > > > > > > > > I'm running kernels with pcmcia-cs-3.2.4 and linux-wlan-ng-0.2.1-pre11 (also > > > > tried 0.2). With 2.4.22-rc3 to final the system hangs if I insert my LevelOne > > > > WPC-0100 (Prism-II-base wlan), no output at all. Everything worked well up to > > > > and including 2.4.22-rc2. > > > > > > > > Regards, > > > > Christian > > > > > > > > - > > > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > > > the body of a message to majordomo@vger.kernel.org > > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > Please read the FAQ at http://www.tux.org/lkml/ > > > > > > > > > > - > > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > > the body of a message to majordomo@vger.kernel.org > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > Please read the FAQ at http://www.tux.org/lkml/ > > -- > > Nigel Cunningham > > 495 St Georges Road South, Hastings 4201, New Zealand > > > > You see, at just the right time, when we were still powerless, > > Christ died for the ungodly. > > -- Romans 5:6, NIV. > > > > - > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Nigel Cunningham 495 St Georges Road South, Hastings 4201, New Zealand You see, at just the right time, when we were still powerless, Christ died for the ungodly. -- Romans 5:6, NIV. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 2.4.22 hangs with pcmcia and linux-wlan 2003-08-26 4:21 ` Nigel Cunningham @ 2003-08-26 17:19 ` Christian Hesse 0 siblings, 0 replies; 6+ messages in thread From: Christian Hesse @ 2003-08-26 17:19 UTC (permalink / raw) To: Nigel Cunningham, Willy Tarreau Cc: Hmamouche, Youssef, Linux Kernel Mailing List On Tuesday 26 August 2003 06:21, Nigel Cunningham wrote: > Bingo. No luck for me. root@kronos-one:~# cat /proc/interrupts CPU0 0: 14024 XT-PIC timer 1: 381 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 2 XT-PIC i82365 8: 1 XT-PIC rtc 9: 8 XT-PIC acpi 11: 16 XT-PIC usb-uhci, usb-uhci 14: 3317 XT-PIC ide0 15: 5 XT-PIC ide1 NMI: 0 LOC: 13984 ERR: 10 MIS: 0 > Now I just need to learn how to get it to assign a different IRQ. Add "exclude irq 9" to /etc/pcmcia/config.opts Christian ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2003-08-26 17:19 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2003-08-25 23:00 2.4.22 hangs with pcmcia and linux-wlan Christian Hesse 2003-08-26 3:37 ` Hmamouche, Youssef 2003-08-26 3:45 ` Nigel Cunningham 2003-08-26 4:11 ` Willy Tarreau 2003-08-26 4:21 ` Nigel Cunningham 2003-08-26 17:19 ` Christian Hesse
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox