[PATCH 08/13] regulator: core kbuild files

[PATCH 08/13] regulator: core kbuild files

[Liam Girdwood]

This patch adds kernel build support for the regulator core.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
---
 arch/arm/Kconfig           |    2 +
 drivers/regulator/Kconfig  |   49 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/regulator/Makefile |   10 +++++++++
 3 files changed, 61 insertions(+), 0 deletions(-)
 create mode 100644 drivers/regulator/Kconfig
 create mode 100644 drivers/regulator/Makefile

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b786e68..2e532fb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1179,6 +1179,8 @@ source "drivers/dma/Kconfig"
 
 source "drivers/dca/Kconfig"
 
+source "drivers/regulator/Kconfig"
+
 source "drivers/uio/Kconfig"
 
 endmenu
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
new file mode 100644
index 0000000..84f89ec
--- /dev/null
+++ b/drivers/regulator/Kconfig
@@ -0,0 +1,49 @@
+menu "Voltage and Current regulators"
+
+config REGULATOR
+	bool "Voltage and Current Regulator Support"
+	default n
+	help
+	  Generic Voltage and Current Regulator support.
+
+	  This framework is designed to provide a generic interface to voltage
+	  and current regulators within the Linux kernel. It's intended to
+	  provide voltage and current control to client or consumer drivers and
+	  also provide status information to user space applications through a
+	  sysfs interface.
+
+	  The intention is to allow systems to dynamically control regulator
+	  output in order to save power and prolong battery life. This applies
+	  to both voltage regulators (where voltage output is controllable) and
+	  current sinks (where current output is controllable).
+
+	  This framework safely compiles out if not selected so that client
+	  drivers can still be used in systems with no software controllable
+	  regulators.
+
+	  If unsure, say no.
+
+config REGULATOR_DEBUG
+	bool "Regulator debug support"
+	depends on REGULATOR
+	help
+	  Say yes here to enable debugging support.
+
+config REGULATOR_FIXED_VOLTAGE
+	tristate
+	default n
+	select REGULATOR
+
+config REGULATOR_VIRTUAL_CONSUMER
+	tristate "Virtual regulator consumer support"
+	default n
+	select REGULATOR
+	help
+	  This driver provides a virtual consumer for the voltage and
+          current regulator API which provides sysfs controls for
+          configuring the supplies requested.  This is mainly useful
+          for test purposes.
+
+          If unsure, say no.
+
+endmenu
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
new file mode 100644
index 0000000..29528b7
--- /dev/null
+++ b/drivers/regulator/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for regulator drivers.
+#
+
+
+obj-$(CONFIG_REGULATOR) += core.o
+obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
+obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
+
+ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
-- 
1.5.4.3