The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Kay Sievers <kay.sievers@vrfy.org>
To: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: linux-kernel <linux-kernel@vger.kernel.org>, Greg KH <greg@kroah.com>
Subject: firewire: struct device - replace bus_id with dev_name(), dev_set_name()
Date: Thu, 30 Oct 2008 01:41:56 +0100	[thread overview]
Message-ID: <1225327316.5970.33.camel@nga.site> (raw)

This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from
"struct device", to find the remaining pieces to convert, and finally
switch over to the new api, which will remove the 20 bytes array
and does no longer have a size limitation.

Thanks,
Kay


From: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Subject: firewire: struct device - replace bus_id with dev_name(), dev_set_name()

CC: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
---


diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c
index 3fccdd4..6b9be42 100644
--- a/drivers/firewire/fw-device.c
+++ b/drivers/firewire/fw-device.c
@@ -587,8 +587,7 @@ static void create_units(struct fw_device *device)
 		unit->device.bus = &fw_bus_type;
 		unit->device.type = &fw_unit_type;
 		unit->device.parent = &device->device;
-		snprintf(unit->device.bus_id, sizeof(unit->device.bus_id),
-			 "%s.%d", device->device.bus_id, i++);
+		dev_set_name(&unit->device, "%s.%d", dev_name(&device->device), i++);
 
 		init_fw_attribute_group(&unit->device,
 					fw_unit_attributes,
@@ -711,8 +710,7 @@ static void fw_device_init(struct work_struct *work)
 	device->device.type = &fw_device_type;
 	device->device.parent = device->card->device;
 	device->device.devt = MKDEV(fw_cdev_major, minor);
-	snprintf(device->device.bus_id, sizeof(device->device.bus_id),
-		 "fw%d", minor);
+	dev_set_name(&device->device, "fw%d", minor);
 
 	init_fw_attribute_group(&device->device,
 				fw_device_attributes,
@@ -741,13 +739,13 @@ static void fw_device_init(struct work_struct *work)
 		if (device->config_rom_retries)
 			fw_notify("created device %s: GUID %08x%08x, S%d00, "
 				  "%d config ROM retries\n",
-				  device->device.bus_id,
+				  dev_name(&device->device),
 				  device->config_rom[3], device->config_rom[4],
 				  1 << device->max_speed,
 				  device->config_rom_retries);
 		else
 			fw_notify("created device %s: GUID %08x%08x, S%d00\n",
-				  device->device.bus_id,
+				  dev_name(&device->device),
 				  device->config_rom[3], device->config_rom[4],
 				  1 << device->max_speed);
 		device->config_rom_retries = 0;
@@ -883,12 +881,12 @@ static void fw_device_refresh(struct work_struct *work)
 		    FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
 		goto gone;
 
-	fw_notify("refreshed device %s\n", device->device.bus_id);
+	fw_notify("refreshed device %s\n", dev_name(&device->device));
 	device->config_rom_retries = 0;
 	goto out;
 
  give_up:
-	fw_notify("giving up on refresh of device %s\n", device->device.bus_id);
+	fw_notify("giving up on refresh of device %s\n", dev_name(&device->device));
  gone:
 	atomic_set(&device->state, FW_DEVICE_SHUTDOWN);
 	fw_device_shutdown(work);
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 251416f..964c697 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -2454,7 +2454,7 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
 		goto fail_self_id;
 
 	fw_notify("Added fw-ohci device %s, OHCI version %x.%x\n",
-		  dev->dev.bus_id, version >> 16, version & 0xff);
+		  dev_name(&dev->dev), version >> 16, version & 0xff);
 	return 0;
 
  fail_self_id:
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index ef0b9b4..0a87127 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -1119,7 +1119,7 @@ static int sbp2_probe(struct device *dev)
 	tgt->unit = unit;
 	kref_init(&tgt->kref);
 	INIT_LIST_HEAD(&tgt->lu_list);
-	tgt->bus_id = unit->device.bus_id;
+	tgt->bus_id = dev_name(&unit->device);
 	tgt->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4];
 
 	if (fw_device_enable_phys_dma(device) < 0)



             reply	other threads:[~2008-10-30  0:42 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-30  0:41 Kay Sievers [this message]
2008-10-31  7:55 ` firewire: struct device - replace bus_id with dev_name(), dev_set_name() Stefan Richter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1225327316.5970.33.camel@nga.site \
    --to=kay.sievers@vrfy.org \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stefanr@s5r6.in-berlin.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox