From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: Kay Sievers <kay.sievers@vrfy.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
Greg KH <greg@kroah.com>,
linux1394-devel@lists.sourceforge.net
Subject: Re: firewire: struct device - replace bus_id with dev_name(), dev_set_name()
Date: Fri, 31 Oct 2008 08:55:25 +0100 [thread overview]
Message-ID: <490AB9ED.2060005@s5r6.in-berlin.de> (raw)
In-Reply-To: <1225327316.5970.33.camel@nga.site>
Kay Sievers wrote:
> This patch is part of a larger patch series which will remove
> the "char bus_id[20]" name string from struct device. The device
> name is managed in the kobject anyway, and without any size
> limitation, and just needlessly copied into "struct device".
>
> To set and read the device name dev_name(dev) and dev_set_name(dev)
> must be used. If your code uses static kobjects, which it shouldn't
> do, "const char *init_name" can be used to statically provide the
> name the registered device should have. At registration time, the
> init_name field is cleared, to enforce the use of dev_name(dev) to
> access the device name at a later time.
>
> We need to get rid of all occurrences of bus_id in the entire tree
> to be able to enable the new interface. Please apply this patch,
> and possibly convert any remaining remaining occurrences of bus_id.
>
> We want to submit a patch to -next, which will remove bus_id from
> "struct device", to find the remaining pieces to convert, and finally
> switch over to the new api, which will remove the 20 bytes array
> and does no longer have a size limitation.
>
> Thanks,
> Kay
>
>
> From: Kay Sievers <kay.sievers@vrfy.org>
> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
> Subject: firewire: struct device - replace bus_id with dev_name(), dev_set_name()
>
> CC: Stefan Richter <stefanr@s5r6.in-berlin.de>
> Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
> ---
Committed to linux1394-2.6.git. Thanks.
>
>
> diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c
> index 3fccdd4..6b9be42 100644
> --- a/drivers/firewire/fw-device.c
> +++ b/drivers/firewire/fw-device.c
> @@ -587,8 +587,7 @@ static void create_units(struct fw_device *device)
> unit->device.bus = &fw_bus_type;
> unit->device.type = &fw_unit_type;
> unit->device.parent = &device->device;
> - snprintf(unit->device.bus_id, sizeof(unit->device.bus_id),
> - "%s.%d", device->device.bus_id, i++);
> + dev_set_name(&unit->device, "%s.%d", dev_name(&device->device), i++);
>
> init_fw_attribute_group(&unit->device,
> fw_unit_attributes,
> @@ -711,8 +710,7 @@ static void fw_device_init(struct work_struct *work)
> device->device.type = &fw_device_type;
> device->device.parent = device->card->device;
> device->device.devt = MKDEV(fw_cdev_major, minor);
> - snprintf(device->device.bus_id, sizeof(device->device.bus_id),
> - "fw%d", minor);
> + dev_set_name(&device->device, "fw%d", minor);
>
> init_fw_attribute_group(&device->device,
> fw_device_attributes,
> @@ -741,13 +739,13 @@ static void fw_device_init(struct work_struct *work)
> if (device->config_rom_retries)
> fw_notify("created device %s: GUID %08x%08x, S%d00, "
> "%d config ROM retries\n",
> - device->device.bus_id,
> + dev_name(&device->device),
> device->config_rom[3], device->config_rom[4],
> 1 << device->max_speed,
> device->config_rom_retries);
> else
> fw_notify("created device %s: GUID %08x%08x, S%d00\n",
> - device->device.bus_id,
> + dev_name(&device->device),
> device->config_rom[3], device->config_rom[4],
> 1 << device->max_speed);
> device->config_rom_retries = 0;
> @@ -883,12 +881,12 @@ static void fw_device_refresh(struct work_struct *work)
> FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
> goto gone;
>
> - fw_notify("refreshed device %s\n", device->device.bus_id);
> + fw_notify("refreshed device %s\n", dev_name(&device->device));
> device->config_rom_retries = 0;
> goto out;
>
> give_up:
> - fw_notify("giving up on refresh of device %s\n", device->device.bus_id);
> + fw_notify("giving up on refresh of device %s\n", dev_name(&device->device));
> gone:
> atomic_set(&device->state, FW_DEVICE_SHUTDOWN);
> fw_device_shutdown(work);
> diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
> index 251416f..964c697 100644
> --- a/drivers/firewire/fw-ohci.c
> +++ b/drivers/firewire/fw-ohci.c
> @@ -2454,7 +2454,7 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
> goto fail_self_id;
>
> fw_notify("Added fw-ohci device %s, OHCI version %x.%x\n",
> - dev->dev.bus_id, version >> 16, version & 0xff);
> + dev_name(&dev->dev), version >> 16, version & 0xff);
> return 0;
>
> fail_self_id:
> diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
> index ef0b9b4..0a87127 100644
> --- a/drivers/firewire/fw-sbp2.c
> +++ b/drivers/firewire/fw-sbp2.c
> @@ -1119,7 +1119,7 @@ static int sbp2_probe(struct device *dev)
> tgt->unit = unit;
> kref_init(&tgt->kref);
> INIT_LIST_HEAD(&tgt->lu_list);
> - tgt->bus_id = unit->device.bus_id;
> + tgt->bus_id = dev_name(&unit->device);
> tgt->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4];
>
> if (fw_device_enable_phys_dma(device) < 0)
>
>
--
Stefan Richter
-=====-==--- =-=- =====
http://arcgraph.de/sr/
prev parent reply other threads:[~2008-10-31 7:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-30 0:41 firewire: struct device - replace bus_id with dev_name(), dev_set_name() Kay Sievers
2008-10-31 7:55 ` Stefan Richter [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=490AB9ED.2060005@s5r6.in-berlin.de \
--to=stefanr@s5r6.in-berlin.de \
--cc=greg@kroah.com \
--cc=kay.sievers@vrfy.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux1394-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox