* [patch] w1_ds2433: clear the validcrc flag after a write
@ 2009-02-23 4:19 Ben Gardner
0 siblings, 0 replies; only message in thread
From: Ben Gardner @ 2009-02-23 4:19 UTC (permalink / raw)
To: linux-kernel; +Cc: Andrew Morton, Ben Gardner, Evgeniy Polyakov
The w1_ds2433 driver does not read from the hardware if the CRC was valid on the last read.
The validcrc flag should be cleared after a write so that the new value can be read.
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
--- linux-2.6.28.5.orig/drivers/w1/slaves/w1_ds2433.c 2009-02-16 13:52:06.000000000 -0600
+++ linux-2.6.28.5/drivers/w1/slaves/w1_ds2433.c 2009-02-16 13:52:27.000000000 -0600
@@ -156,6 +156,9 @@
*/
static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data)
{
+#ifdef CONFIG_W1_SLAVE_DS2433_CRC
+ struct w1_f23_data *f23 = sl->family_data;
+#endif
u8 wrbuf[4];
u8 rdbuf[W1_PAGE_SIZE + 3];
u8 es = (addr + len - 1) & 0x1f;
@@ -196,7 +199,9 @@
/* Reset the bus to wake up the EEPROM (this may not be needed) */
w1_reset_bus(sl->master);
-
+#ifdef CONFIG_W1_SLAVE_DS2433_CRC
+ f23->validcrc &= ~(1 << (addr >> W1_PAGE_BITS));
+#endif
return 0;
}
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-02-23 4:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-02-23 4:19 [patch] w1_ds2433: clear the validcrc flag after a write Ben Gardner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox