[PATCH 1/3] regulator: Use _regulator_get_voltage() consistently

[PATCH 1/3] regulator: Use _regulator_get_voltage() consistently

[Mark Brown]

Rather than referencing the get_voltage() operation directly in the
ops struct use the internal _regulator_get_voltage() API call to do
so, facilitating refactoring.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/core.c |   18 ++++++++++--------
 1 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 5d07e5d..671eb53 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -581,14 +581,15 @@ static void drms_uA_update(struct regulator_dev *rdev)
 		return;
 
 	/* get output voltage */
-	output_uV = rdev->desc->ops->get_voltage(rdev);
+	output_uV = _regulator_get_voltage(rdev);
 	if (output_uV <= 0)
 		return;
 
 	/* get input voltage */
-	if (rdev->supply && rdev->supply->desc->ops->get_voltage)
-		input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
-	else
+	input_uV = 0;
+	if (rdev->supply)
+		input_uV = _regulator_get_voltage(rdev);
+	if (input_uV <= 0)
 		input_uV = rdev->constraints->input_uV;
 	if (input_uV <= 0)
 		return;
@@ -1908,16 +1909,17 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
 		goto out;
 
 	/* get output voltage */
-	output_uV = rdev->desc->ops->get_voltage(rdev);
+	output_uV = _regulator_get_voltage(rdev);
 	if (output_uV <= 0) {
 		rdev_err(rdev, "invalid output voltage found\n");
 		goto out;
 	}
 
 	/* get input voltage */
-	if (rdev->supply && rdev->supply->desc->ops->get_voltage)
-		input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
-	else
+	input_uV = 0;
+	if (rdev->supply)
+		input_uV = _regulator_get_voltage(rdev->supply);
+	if (input_uV <= 0)
 		input_uV = rdev->constraints->input_uV;
 	if (input_uV <= 0) {
 		rdev_err(rdev, "invalid input voltage found\n");
-- 
1.7.1

[PATCH 2/3] regulator: Allow drivers to report voltages as selectors

[Mark Brown]

Since drivers already have to provide an API for translating selectors
into voltages they may as well just report the selector values directly
to the core API rather than implement the lookup themselves. The old
interface is left in place for now, but may be removed in future.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/core.c         |   25 ++++++++++++++++++++++---
 include/linux/regulator/driver.h |    3 +++
 2 files changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 671eb53..b362dbd 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -577,7 +577,9 @@ static void drms_uA_update(struct regulator_dev *rdev)
 
 	err = regulator_check_drms(rdev);
 	if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
-	    !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode)
+	    (!rdev->desc->ops->get_voltage &&
+	     !rdev->desc->ops->get_voltage_sel) ||
+	    !rdev->desc->ops->set_mode)
 		return;
 
 	/* get output voltage */
@@ -1682,7 +1684,14 @@ EXPORT_SYMBOL_GPL(regulator_set_voltage);
 
 static int _regulator_get_voltage(struct regulator_dev *rdev)
 {
-	/* sanity check */
+	int sel;
+
+	if (rdev->desc->ops->get_voltage_sel) {
+		sel = rdev->desc->ops->get_voltage_sel(rdev);
+		if (sel < 0)
+			return sel;
+		return rdev->desc->ops->list_voltage(rdev, sel);
+	}
 	if (rdev->desc->ops->get_voltage)
 		return rdev->desc->ops->get_voltage(rdev);
 	else
@@ -2191,7 +2200,7 @@ static int add_regulator_attributes(struct regulator_dev *rdev)
 	int			status = 0;
 
 	/* some attributes need specific methods to be displayed */
-	if (ops->get_voltage) {
+	if (ops->get_voltage || ops->get_voltage_sel) {
 		status = device_create_file(dev, &dev_attr_microvolts);
 		if (status < 0)
 			return status;
@@ -2327,6 +2336,16 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	if (!init_data)
 		return ERR_PTR(-EINVAL);
 
+	/* Only one of each should be implemented */
+	WARN_ON(regulator_desc->ops->get_voltage &&
+		regulator_desc->ops->get_voltage_sel);
+
+	/* If we're using selectors we must implement list_voltage. */
+	if (regulator_desc->ops->get_voltage_sel &&
+	    !regulator_desc->ops->list_voltage) {
+		return ERR_PTR(-EINVAL);
+	}
+
 	rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL);
 	if (rdev == NULL)
 		return ERR_PTR(-ENOMEM);
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index cce5753..bf3e653 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -43,6 +43,8 @@ enum regulator_status {
  * @set_voltage: Set the voltage for the regulator within the range specified.
  *               The driver should select the voltage closest to min_uV.
  * @get_voltage: Return the currently configured voltage for the regulator.
+ * @get_voltage_sel: Return the currently configured voltage selector for the
+ *                   regulator.
  * @list_voltage: Return one of the supported voltages, in microvolts; zero
  *	if the selector indicates a voltage that is unusable on this system;
  *	or negative errno.  Selectors range from zero to one less than
@@ -82,6 +84,7 @@ struct regulator_ops {
 	int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV,
 			    unsigned *selector);
 	int (*get_voltage) (struct regulator_dev *);
+	int (*get_voltage_sel) (struct regulator_dev *);
 
 	/* get/set regulator current  */
 	int (*set_current_limit) (struct regulator_dev *,
-- 
1.7.1

[PATCH 3/3] regulator: Convert WM831x drivers to use get_voltage_sel()

[Mark Brown]

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/regulator/wm831x-dcdc.c |   14 +++++++-------
 drivers/regulator/wm831x-ldo.c  |   18 +++++++++---------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 71da6b2..8b0d2c4 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -377,14 +377,14 @@ static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
 	return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel);
 }
 
-static int wm831x_buckv_get_voltage(struct regulator_dev *rdev)
+static int wm831x_buckv_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
 
 	if (dcdc->dvs_gpio && dcdc->dvs_gpio_state)
-		return wm831x_buckv_list_voltage(rdev, dcdc->dvs_vsel);
+		return dcdc->dvs_vsel;
 	else
-		return wm831x_buckv_list_voltage(rdev, dcdc->on_vsel);
+		return dcdc->on_vsel;
 }
 
 /* Current limit options */
@@ -426,7 +426,7 @@ static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev)
 
 static struct regulator_ops wm831x_buckv_ops = {
 	.set_voltage = wm831x_buckv_set_voltage,
-	.get_voltage = wm831x_buckv_get_voltage,
+	.get_voltage_sel = wm831x_buckv_get_voltage_sel,
 	.list_voltage = wm831x_buckv_list_voltage,
 	.set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
 	.set_current_limit = wm831x_buckv_set_current_limit,
@@ -678,7 +678,7 @@ static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev,
 	return wm831x_buckp_set_voltage_int(rdev, reg, uV, uV, &selector);
 }
 
-static int wm831x_buckp_get_voltage(struct regulator_dev *rdev)
+static int wm831x_buckp_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
 	struct wm831x *wm831x = dcdc->wm831x;
@@ -689,12 +689,12 @@ static int wm831x_buckp_get_voltage(struct regulator_dev *rdev)
 	if (val < 0)
 		return val;
 
-	return wm831x_buckp_list_voltage(rdev, val & WM831X_DC3_ON_VSEL_MASK);
+	return val & WM831X_DC3_ON_VSEL_MASK;
 }
 
 static struct regulator_ops wm831x_buckp_ops = {
 	.set_voltage = wm831x_buckp_set_voltage,
-	.get_voltage = wm831x_buckp_get_voltage,
+	.get_voltage_sel = wm831x_buckp_get_voltage_sel,
 	.list_voltage = wm831x_buckp_list_voltage,
 	.set_suspend_voltage = wm831x_buckp_set_suspend_voltage,
 
diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
index 9594e71..c94fc5b 100644
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@@ -160,7 +160,7 @@ static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
 	return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV, &selector);
 }
 
-static int wm831x_gp_ldo_get_voltage(struct regulator_dev *rdev)
+static int wm831x_gp_ldo_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
 	struct wm831x *wm831x = ldo->wm831x;
@@ -173,7 +173,7 @@ static int wm831x_gp_ldo_get_voltage(struct regulator_dev *rdev)
 
 	ret &= WM831X_LDO1_ON_VSEL_MASK;
 
-	return wm831x_gp_ldo_list_voltage(rdev, ret);
+	return ret;
 }
 
 static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev)
@@ -293,7 +293,7 @@ static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev,
 
 static struct regulator_ops wm831x_gp_ldo_ops = {
 	.list_voltage = wm831x_gp_ldo_list_voltage,
-	.get_voltage = wm831x_gp_ldo_get_voltage,
+	.get_voltage_sel = wm831x_gp_ldo_get_voltage_sel,
 	.set_voltage = wm831x_gp_ldo_set_voltage,
 	.set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage,
 	.get_mode = wm831x_gp_ldo_get_mode,
@@ -465,7 +465,7 @@ static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
 	return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV, &selector);
 }
 
-static int wm831x_aldo_get_voltage(struct regulator_dev *rdev)
+static int wm831x_aldo_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
 	struct wm831x *wm831x = ldo->wm831x;
@@ -478,7 +478,7 @@ static int wm831x_aldo_get_voltage(struct regulator_dev *rdev)
 
 	ret &= WM831X_LDO7_ON_VSEL_MASK;
 
-	return wm831x_aldo_list_voltage(rdev, ret);
+	return ret;
 }
 
 static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev)
@@ -559,7 +559,7 @@ static int wm831x_aldo_get_status(struct regulator_dev *rdev)
 
 static struct regulator_ops wm831x_aldo_ops = {
 	.list_voltage = wm831x_aldo_list_voltage,
-	.get_voltage = wm831x_aldo_get_voltage,
+	.get_voltage_sel = wm831x_aldo_get_voltage_sel,
 	.set_voltage = wm831x_aldo_set_voltage,
 	.set_suspend_voltage = wm831x_aldo_set_suspend_voltage,
 	.get_mode = wm831x_aldo_get_mode,
@@ -718,7 +718,7 @@ static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev,
 	return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV, &selector);
 }
 
-static int wm831x_alive_ldo_get_voltage(struct regulator_dev *rdev)
+static int wm831x_alive_ldo_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
 	struct wm831x *wm831x = ldo->wm831x;
@@ -731,7 +731,7 @@ static int wm831x_alive_ldo_get_voltage(struct regulator_dev *rdev)
 
 	ret &= WM831X_LDO11_ON_VSEL_MASK;
 
-	return wm831x_alive_ldo_list_voltage(rdev, ret);
+	return ret;
 }
 
 static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev)
@@ -753,7 +753,7 @@ static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev)
 
 static struct regulator_ops wm831x_alive_ldo_ops = {
 	.list_voltage = wm831x_alive_ldo_list_voltage,
-	.get_voltage = wm831x_alive_ldo_get_voltage,
+	.get_voltage_sel = wm831x_alive_ldo_get_voltage_sel,
 	.set_voltage = wm831x_alive_ldo_set_voltage,
 	.set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage,
 	.get_status = wm831x_alive_ldo_get_status,
-- 
1.7.1

Re: [PATCH 1/3] regulator: Use _regulator_get_voltage() consistently

[Liam Girdwood]

On Fri, 2010-12-10 at 17:28 +0000, Mark Brown wrote:
> Rather than referencing the get_voltage() operation directly in the
> ops struct use the internal _regulator_get_voltage() API call to do
> so, facilitating refactoring.
> 
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

All Applied.

Thanks

Liam
-- 
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk