From: Martin Botka <martin.botka@somainline.org>
To: martin.botka1@gmail.com
Cc: ~postmarketos/upstreaming@lists.sr.ht,
Konrad Dybcio <konrad.dybcio@somainline.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@somainline.org>,
Marijn Suijten <marijn.suijten@somainline.org>,
Jami Kettunen <jamipkettunen@somainline.org>,
Paul Bouchara <paul.bouchara@somainline.org>,
Yenda <jtrmal@gmail.com>, Lee Jones <lee@kernel.org>,
Chen-Yu Tsai <wens@csie.org>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] mfd: ax20x: Add suppport for AXP1530 PMIC
Date: Mon, 14 Nov 2022 17:27:37 +0100 [thread overview]
Message-ID: <12JCLR.5D1QEOZPJVQK3@somainline.org> (raw)
In-Reply-To: <20221114162334.1801137-1-martin.botka@somainline.org>
This way my bad. There isnt second patch. It is just this one.
Split it wrong in git.
On Mon, Nov 14 2022 at 05:23:33 PM +01:00:00, Martin Botka
<martin.botka@somainline.org> wrote:
> AXP1530 is a PMIC chip produced by X-Powers and an be connected via
> I2C or RSB bus.
> Where AXP313A seems to be closely related so the same driver can be
> used and
> seen it only paired with H616 SoC.
>
> Signed-off-by: Martin Botka <martin.botka@somainline.org>
> ---
> drivers/mfd/axp20x-i2c.c | 2 ++
> drivers/mfd/axp20x-rsb.c | 1 +
> drivers/mfd/axp20x.c | 63
> ++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/axp20x.h | 34 ++++++++++++++++++++
> 4 files changed, 100 insertions(+)
>
> diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
> index 8fd6727dc30a..49c4acee3927 100644
> --- a/drivers/mfd/axp20x-i2c.c
> +++ b/drivers/mfd/axp20x-i2c.c
> @@ -66,6 +66,7 @@ static const struct of_device_id
> axp20x_i2c_of_match[] = {
> { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
> { .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
> { .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
> + { .compatible = "x-powers,axp1530", .data = (void *)AXP1530_ID},
> { },
> };
> MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match);
> @@ -79,6 +80,7 @@ static const struct i2c_device_id axp20x_i2c_id[] =
> {
> { "axp223", 0 },
> { "axp803", 0 },
> { "axp806", 0 },
> + { "axp1530", 0 },
> { },
> };
> MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
> diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
> index 214bc0d84d44..29d38be29904 100644
> --- a/drivers/mfd/axp20x-rsb.c
> +++ b/drivers/mfd/axp20x-rsb.c
> @@ -62,6 +62,7 @@ static const struct of_device_id
> axp20x_rsb_of_match[] = {
> { .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
> { .compatible = "x-powers,axp809", .data = (void *)AXP809_ID },
> { .compatible = "x-powers,axp813", .data = (void *)AXP813_ID },
> + { .compatible = "x-powers,axp1530", .data = (void *)AXP1530_ID },
> { },
> };
> MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match);
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 880c41fa7021..a24bc2b926ce 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -43,6 +43,7 @@ static const char * const axp20x_model_names[] = {
> "AXP806",
> "AXP809",
> "AXP813",
> + "AXP1530",
> };
>
> static const struct regmap_range axp152_writeable_ranges[] = {
> @@ -168,6 +169,24 @@ static const struct regmap_access_table
> axp806_volatile_table = {
> .n_yes_ranges = ARRAY_SIZE(axp806_volatile_ranges),
> };
>
> +static const struct regmap_range axp1530_writeable_ranges[] = {
> + regmap_reg_range(AXP1530_ON_INDICATE, AXP1530_FREQUENCY),
> +};
> +
> +static const struct regmap_range axp1530_volatile_ranges[] = {
> + regmap_reg_range(AXP1530_ON_INDICATE, AXP1530_FREQUENCY),
> +};
> +
> +static const struct regmap_access_table axp1530_writeable_table = {
> + .yes_ranges = axp1530_writeable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(axp1530_writeable_ranges),
> +};
> +
> +static const struct regmap_access_table axp1530_volatile_table = {
> + .yes_ranges = axp1530_volatile_ranges,
> + .n_yes_ranges = ARRAY_SIZE(axp1530_volatile_ranges),
> +};
> +
> static const struct resource axp152_pek_resources[] = {
> DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
> DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
> @@ -281,6 +300,15 @@ static const struct regmap_config
> axp806_regmap_config = {
> .cache_type = REGCACHE_RBTREE,
> };
>
> +static const struct regmap_config axp1530_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .wr_table = &axp1530_writeable_table,
> + .volatile_table = &axp1530_volatile_table,
> + .max_register = AXP1530_FREQUENCY,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> #define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \
> [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask =
> BIT(_mask) }
>
> @@ -502,6 +530,16 @@ static const struct regmap_irq
> axp809_regmap_irqs[] = {
> INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT, 4, 0),
> };
>
> +static const struct regmap_irq axp1530_regmap_irqs[] = {
> + INIT_REGMAP_IRQ(AXP1530, KEY_L2H_EN, 0, 7),
> + INIT_REGMAP_IRQ(AXP1530, KEY_H2L_EN, 0, 6),
> + INIT_REGMAP_IRQ(AXP1530, POKSIRQ_EN, 0, 5),
> + INIT_REGMAP_IRQ(AXP1530, POKLIRQ_EN, 0, 4),
> + INIT_REGMAP_IRQ(AXP1530, DCDC3_UNDER, 0, 3),
> + INIT_REGMAP_IRQ(AXP1530, DCDC2_UNDER, 0, 2),
> + INIT_REGMAP_IRQ(AXP1530, TEMP_OVER, 0, 0),
> +};
> +
> static const struct regmap_irq_chip axp152_regmap_irq_chip = {
> .name = "axp152_irq_chip",
> .status_base = AXP152_IRQ1_STATE,
> @@ -588,6 +626,18 @@ static const struct regmap_irq_chip
> axp809_regmap_irq_chip = {
> .num_regs = 5,
> };
>
> +static const struct regmap_irq_chip axp1530_regmap_irq_chip = {
> + .name = "axp1530_irq_chip",
> + .status_base = AXP1530_IRQ_STATUS1,
> + .ack_base = AXP1530_IRQ_STATUS1,
> + .mask_base = AXP1530_IRQ_ENABLE1,
> + .mask_invert = true,
> + .init_ack_masked = true,
> + .irqs = axp1530_regmap_irqs,
> + .num_irqs = ARRAY_SIZE(axp1530_regmap_irqs),
> + .num_regs = 1,
> +};
> +
> static const struct mfd_cell axp20x_cells[] = {
> {
> .name = "axp20x-gpio",
> @@ -832,6 +882,13 @@ static const struct mfd_cell axp813_cells[] = {
> },
> };
>
> +static struct mfd_cell axp1530_cells[] = {
> + {
> + .id = 0,
> + .name = "axp20x-regulator",
> + },
> +};
> +
> static struct axp20x_dev *axp20x_pm_power_off;
> static void axp20x_power_off(void)
> {
> @@ -942,6 +999,12 @@ int axp20x_match_device(struct axp20x_dev
> *axp20x)
> */
> axp20x->regmap_irq_chip = &axp803_regmap_irq_chip;
> break;
> + case AXP1530_ID:
> + axp20x->nr_cells = ARRAY_SIZE(axp1530_cells);
> + axp20x->cells = axp1530_cells;
> + axp20x->regmap_cfg = &axp1530_regmap_config;
> + axp20x->regmap_irq_chip = &axp1530_regmap_irq_chip;
> + break;
> default:
> dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
> return -EINVAL;
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index 9ab0e2fca7ea..75dcc2411940 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -21,6 +21,7 @@ enum axp20x_variants {
> AXP806_ID,
> AXP809_ID,
> AXP813_ID,
> + AXP1530_ID,
> NR_AXP20X_VARIANTS,
> };
>
> @@ -128,6 +129,18 @@ enum axp20x_variants {
> #define AXP803_DCDC6_V_OUT 0x25
> #define AXP803_DCDC_FREQ_CTRL 0x3b
>
> +#define AXP1530_ON_INDICATE 0x00
> +#define AXP1530_OUTPUT_CONTROL 0x10
> +#define AXP1530_DCDC1_CONRTOL 0x13
> +#define AXP1530_DCDC2_CONRTOL 0x14
> +#define AXP1530_DCDC3_CONRTOL 0x15
> +#define AXP1530_ALDO1_CONRTOL 0x16
> +#define AXP1530_DLDO1_CONRTOL 0x17
> +#define AXP1530_OUTOUT_MONITOR 0x1D
> +#define AXP1530_IRQ_ENABLE1 0x20
> +#define AXP1530_IRQ_STATUS1 0x21
> +#define AXP1530_FREQUENCY 0x87
> +
> /* Other DCDC regulator control registers are the same as AXP803 */
> #define AXP813_DCDC7_V_OUT 0x26
>
> @@ -419,6 +432,16 @@ enum {
> AXP813_REG_ID_MAX,
> };
>
> +enum
> +{
> + AXP1530_DCDC1 = 0,
> + AXP1530_DCDC2,
> + AXP1530_DCDC3,
> + AXP1530_LDO1,
> + AXP1530_LDO2,
> + AXP1530_REG_ID_MAX,
> +};
> +
> /* IRQs */
> enum {
> AXP152_IRQ_LDO0IN_CONNECT = 1,
> @@ -632,6 +655,17 @@ enum axp809_irqs {
> AXP809_IRQ_GPIO0_INPUT,
> };
>
> +enum axp1530_irqs
> +{
> + AXP1530_IRQ_TEMP_OVER,
> + AXP1530_IRQ_DCDC2_UNDER = 2,
> + AXP1530_IRQ_DCDC3_UNDER,
> + AXP1530_IRQ_POKLIRQ_EN,
> + AXP1530_IRQ_POKSIRQ_EN,
> + AXP1530_IRQ_KEY_L2H_EN,
> + AXP1530_IRQ_KEY_H2L_EN,
> +};
> +
> struct axp20x_dev {
> struct device *dev;
> int irq;
> --
> 2.38.1
>
next prev parent reply other threads:[~2022-11-14 16:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-14 16:23 [PATCH 1/2] mfd: ax20x: Add suppport for AXP1530 PMIC Martin Botka
2022-11-14 16:27 ` Martin Botka [this message]
2022-11-16 15:49 ` Lee Jones
2022-11-16 21:07 ` Martin Botka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12JCLR.5D1QEOZPJVQK3@somainline.org \
--to=martin.botka@somainline.org \
--cc=angelogioacchino.delregno@somainline.org \
--cc=jamipkettunen@somainline.org \
--cc=jtrmal@gmail.com \
--cc=konrad.dybcio@somainline.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=martin.botka1@gmail.com \
--cc=paul.bouchara@somainline.org \
--cc=wens@csie.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox