Re: Regression 3.2 -> 3.3-rc1 10 sec hang at boot and resume, COMRESET failed

[Lin Ming <ming.m.lin@intel.com>]

On Fri, 2012-02-03 at 09:15 +0800, Lin Ming wrote:
> On Thu, 2012-02-02 at 14:08 +0530, Srivatsa S. Bhat wrote:
> > Adding some Cc's.
> > 
> > On 02/02/2012 10:42 AM, Norbert Preining wrote:
> > 
> > > Dear all,
> > > 
> > > (please Cc)
> > > 
> > > since going from 3.2 to 3.3-rc1 I see a kind of regression wrt booting
> > > time, namely the detection of the CD drive hangs for 10sec (both
> > > dmesg were taken on the same hardware on the same day):
> > > 
> > > with 3.3-rc1 and rc2:
> > > [    3.694012] sd 0:0:0:0: [sda] Attached SCSI disk
> > > [    9.004013] ata2: link is slow to respond, please be patient (ready=0)
> > > [   13.652013] ata2: COMRESET failed (errno=-16)
> > > [   13.972022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> 
> I'm looking into this problem.
> But I can't reproduce this regression.
> 
> Could you attach the full 3.3-rc2 dmesg?

And could you do a bisect?

First, you can check if commit 318893e is good or bad.

If it's bad, then you only need to do a bisect between v3.2 and 318893e.
Otherwise, you need to do a bisect between v3.2 and v3.3-rc1.

Thanks,
Lin Ming