From: Yinghai Lu <yinghai@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@elte.hu>,
"H. Peter Anvin" <hpa@zytor.com>, Jacob Shin <jacob.shin@amd.com>,
Tejun Heo <tj@kernel.org>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
linux-kernel@vger.kernel.org, Jiang Liu <jiang.liu@huawei.com>,
Yinghai Lu <yinghai@kernel.org>, Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org
Subject: [PATCH 2/3] PCI: correctly detect ACPI PCI host bridge objects
Date: Thu, 18 Oct 2012 13:50:11 -0700 [thread overview]
Message-ID: <1350593430-24470-4-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1350593430-24470-1-git-send-email-yinghai@kernel.org>
From: Jiang Liu <jiang.liu@huawei.com>
The code in pci_root_hp.c depends on function acpi_is_root_bridge()
to check whether an ACPI object is a PCI host bridge or not.
If an ACPI device hasn't been created for the ACPI object yet,
function acpi_is_root_bridge() will return false even if the object
is a PCI host bridge object. That behavior will cause two issues:
1) No ACPI notification handler installed for PCI host bridges absent
at startup, so hotplug events for those bridges won't be handled.
2) rescan_root_bridge() can't reenumerate offlined PCI host bridges
because the ACPI devices have been already destroyed.
So use acpi_match_object_info_ids() to correctly detect PCI host bridges.
-v2: update to use acpi_match_object_info_ids() from Tang Chen - Yinghai
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
---
drivers/acpi/pci_root_hp.c | 25 ++++++++++++++++++++++++-
1 files changed, 24 insertions(+), 1 deletions(-)
diff --git a/drivers/acpi/pci_root_hp.c b/drivers/acpi/pci_root_hp.c
index 2aebf78..3edec7f 100644
--- a/drivers/acpi/pci_root_hp.c
+++ b/drivers/acpi/pci_root_hp.c
@@ -19,6 +19,12 @@ struct acpi_root_bridge {
u32 flags;
};
+static const struct acpi_device_id root_device_ids[] = {
+ {"PNP0A03", 0},
+ {"PNP0A08", 0},
+ {"", 0},
+};
+
/* bridge flags */
#define ROOT_BRIDGE_HAS_EJ0 (0x00000002)
#define ROOT_BRIDGE_HAS_PS3 (0x00000080)
@@ -256,6 +262,23 @@ static void handle_hotplug_event_root(acpi_handle handle, u32 type,
_handle_hotplug_event_root);
}
+static bool acpi_is_root_bridge_object(acpi_handle handle)
+{
+ struct acpi_device_info *info = NULL;
+ acpi_status status;
+ bool ret;
+
+ status = acpi_get_object_info(handle, &info);
+ if (ACPI_FAILURE(status))
+ return false;
+
+ ret = !acpi_match_object_info_ids(info, root_device_ids);
+
+ kfree(info);
+
+ return ret;
+}
+
static acpi_status __init
find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
{
@@ -264,7 +287,7 @@ find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
.pointer = objname };
int *count = (int *)context;
- if (!acpi_is_root_bridge(handle))
+ if (!acpi_is_root_bridge_object(handle))
return AE_OK;
(*count)++;
--
1.7.7
next prev parent reply other threads:[~2012-10-18 20:55 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-18 20:50 [PATCH -v5 00/19] x86: Use BRK to pre mapping page table to make xen happy Yinghai Lu
2012-10-18 20:50 ` [PATCH 1/3] ACPI: Introduce a new acpi handle to determine HID match Yinghai Lu
2012-11-02 12:23 ` Rafael J. Wysocki
2012-11-02 15:03 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 01/19] x86, mm: Align start address to correct big page size Yinghai Lu
2012-10-22 14:16 ` Konrad Rzeszutek Wilk
2012-10-22 16:31 ` Yinghai Lu
2012-10-18 20:50 ` Yinghai Lu [this message]
2012-10-26 9:10 ` [PATCH 2/3] PCI: correctly detect ACPI PCI host bridge objects Bjorn Helgaas
2012-10-26 18:13 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 02/19] x86, mm: Use big page size for small memory range Yinghai Lu
2012-10-22 14:21 ` Konrad Rzeszutek Wilk
2012-10-22 16:33 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 3/3] PCI, ACPI: debug print for installation of acpi root bridge's notifier Yinghai Lu
2012-10-18 20:50 ` [PATCH 03/19] x86, mm: Don't clear page table if range is ram Yinghai Lu
2012-10-22 14:28 ` Konrad Rzeszutek Wilk
2012-10-22 16:56 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 04/19] x86, mm: only keep initial mapping for ram Yinghai Lu
2012-10-22 14:33 ` Konrad Rzeszutek Wilk
2012-10-22 17:43 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 05/19] x86, mm: Break down init_all_memory_mapping Yinghai Lu
2012-10-18 20:50 ` [PATCH 06/19] x86, mm: setup page table in top-down Yinghai Lu
2012-10-19 16:24 ` Stefano Stabellini
2012-10-19 16:41 ` Yinghai Lu
2012-10-22 13:19 ` Stefano Stabellini
2012-10-22 18:17 ` Yinghai Lu
2012-10-22 18:22 ` Yinghai Lu
2012-10-23 12:16 ` Stefano Stabellini
2012-10-23 18:47 ` Yinghai Lu
2012-10-23 12:22 ` Stefano Stabellini
2012-10-23 18:37 ` Yinghai Lu
2012-10-24 10:55 ` Stefano Stabellini
2012-10-22 14:14 ` Konrad Rzeszutek Wilk
2012-10-22 15:06 ` Konrad Rzeszutek Wilk
2012-10-22 18:56 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 07/19] x86, mm: Remove early_memremap workaround for page table accessing on 64bit Yinghai Lu
2012-10-22 15:07 ` Konrad Rzeszutek Wilk
2012-10-22 19:08 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 08/19] x86, mm: Remove parameter in alloc_low_page for 64bit Yinghai Lu
2012-10-22 15:09 ` Konrad Rzeszutek Wilk
2012-10-22 19:09 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 09/19] x86, mm: Merge alloc_low_page between 64bit and 32bit Yinghai Lu
2012-10-22 15:11 ` Konrad Rzeszutek Wilk
2012-10-22 19:14 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 10/19] x86, mm: Move min_pfn_mapped back to mm/init.c Yinghai Lu
2012-10-18 20:50 ` [PATCH 11/19] x86, mm, xen: Remove mapping_pagatable_reserve Yinghai Lu
2012-10-22 15:14 ` Konrad Rzeszutek Wilk
2012-10-22 19:18 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 12/19] x86, mm: Add alloc_low_pages(num) Yinghai Lu
2012-10-22 15:17 ` Konrad Rzeszutek Wilk
2012-10-22 19:24 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 13/19] x86, mm: only call early_ioremap_page_table_range_init() once Yinghai Lu
2012-10-22 15:24 ` Konrad Rzeszutek Wilk
2012-10-22 19:40 ` Yinghai Lu
2012-10-23 0:01 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 14/19] x86, mm: Move back pgt_buf_* to mm/init.c Yinghai Lu
2012-10-18 20:50 ` [PATCH 15/19] x86, mm: Move init_gbpages() out of setup.c Yinghai Lu
2012-10-18 20:50 ` [PATCH 16/19] x86, mm: change low/hignmem_pfn_init to static on 32bit Yinghai Lu
2012-10-18 20:50 ` [PATCH 17/19] x86, mm: Move function declaration into mm_internal.h Yinghai Lu
2012-10-18 20:50 ` [PATCH 18/19] x86, mm: Let "memmap=" take more entries one time Yinghai Lu
2012-10-22 15:19 ` Konrad Rzeszutek Wilk
2012-10-22 19:26 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 19/19] x86, mm: Add check before clear pte above max_low_pfn on 32bit Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350593430-24470-4-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=hpa@zytor.com \
--cc=jacob.shin@amd.com \
--cc=jiang.liu@huawei.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=stefano.stabellini@eu.citrix.com \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox