From: Konrad Rzeszutek Wilk <konrad@kernel.org>
To: Yinghai Lu <yinghai@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@elte.hu>,
"H. Peter Anvin" <hpa@zytor.com>, Jacob Shin <jacob.shin@amd.com>,
Tejun Heo <tj@kernel.org>,
Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 09/19] x86, mm: Merge alloc_low_page between 64bit and 32bit
Date: Mon, 22 Oct 2012 11:11:50 -0400 [thread overview]
Message-ID: <20121022151149.GD22780@phenom.dumpdata.com> (raw)
In-Reply-To: <1350593430-24470-13-git-send-email-yinghai@kernel.org>
On Thu, Oct 18, 2012 at 01:50:20PM -0700, Yinghai Lu wrote:
> They are almost same except 64 bit need to handle after_bootmem.
^^ -
case.
>
> Add mm_internal.h to hide that alloc_low_page out of arch/x86/mm/init*.c
Huh?
I think what you are saying is that you want to expose alloc_low_page
decleration in a header since the function resides in mm/init_[32|64].c ?
>
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> ---
> arch/x86/mm/init.c | 34 ++++++++++++++++++++++++++++++++++
> arch/x86/mm/init_32.c | 26 ++------------------------
> arch/x86/mm/init_64.c | 32 ++------------------------------
> arch/x86/mm/mm_internal.h | 6 ++++++
> 4 files changed, 44 insertions(+), 54 deletions(-)
> create mode 100644 arch/x86/mm/mm_internal.h
>
> diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
> index 9ff29c1..c398b2c 100644
> --- a/arch/x86/mm/init.c
> +++ b/arch/x86/mm/init.c
> @@ -17,10 +17,44 @@
> #include <asm/proto.h>
> #include <asm/dma.h> /* for MAX_DMA_PFN */
>
> +#include "mm_internal.h"
> +
> unsigned long __initdata pgt_buf_start;
> unsigned long __meminitdata pgt_buf_end;
> unsigned long __meminitdata pgt_buf_top;
>
> +__ref void *alloc_low_page(void)
> +{
> + unsigned long pfn;
> + void *adr;
> +
> +#ifdef CONFIG_X86_64
> + if (after_bootmem) {
> + adr = (void *)get_zeroed_page(GFP_ATOMIC | __GFP_NOTRACK);
> +
> + return adr;
> + }
> +#endif
> +
> + if ((pgt_buf_end + 1) >= pgt_buf_top) {
> + unsigned long ret;
> + if (min_pfn_mapped >= max_pfn_mapped)
> + panic("alloc_low_page: ran out of memory");
> + ret = memblock_find_in_range(min_pfn_mapped << PAGE_SHIFT,
> + max_pfn_mapped << PAGE_SHIFT,
> + PAGE_SIZE, PAGE_SIZE);
> + if (!ret)
> + panic("alloc_low_page: can not alloc memory");
> + memblock_reserve(ret, PAGE_SIZE);
> + pfn = ret >> PAGE_SHIFT;
> + } else
> + pfn = pgt_buf_end++;
> +
> + adr = __va(pfn * PAGE_SIZE);
> + clear_page(adr);
> + return adr;
> +}
> +
> /* need 4 4k for initial PMD_SIZE, 4k for 0-ISA_END_ADDRESS */
> #define INIT_PGT_BUF_SIZE (5 * PAGE_SIZE)
> RESERVE_BRK(early_pgt_alloc, INIT_PGT_BUF_SIZE);
> diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
> index 7bb1106..a7f2df1 100644
> --- a/arch/x86/mm/init_32.c
> +++ b/arch/x86/mm/init_32.c
> @@ -53,36 +53,14 @@
> #include <asm/page_types.h>
> #include <asm/init.h>
>
> +#include "mm_internal.h"
> +
> unsigned long highstart_pfn, highend_pfn;
>
> static noinline int do_test_wp_bit(void);
>
> bool __read_mostly __vmalloc_start_set = false;
>
> -static __init void *alloc_low_page(void)
> -{
> - unsigned long pfn;
> - void *adr;
> -
> - if ((pgt_buf_end + 1) >= pgt_buf_top) {
> - unsigned long ret;
> - if (min_pfn_mapped >= max_pfn_mapped)
> - panic("alloc_low_page: ran out of memory");
> - ret = memblock_find_in_range(min_pfn_mapped << PAGE_SHIFT,
> - max_pfn_mapped << PAGE_SHIFT,
> - PAGE_SIZE, PAGE_SIZE);
> - if (!ret)
> - panic("alloc_low_page: can not alloc memory");
> - memblock_reserve(ret, PAGE_SIZE);
> - pfn = ret >> PAGE_SHIFT;
> - } else
> - pfn = pgt_buf_end++;
> -
> - adr = __va(pfn * PAGE_SIZE);
> - clear_page(adr);
> - return adr;
> -}
> -
> /*
> * Creates a middle page table and puts a pointer to it in the
> * given global directory entry. This only returns the gd entry
> diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
> index cbf8dbe..aabe8ff 100644
> --- a/arch/x86/mm/init_64.c
> +++ b/arch/x86/mm/init_64.c
> @@ -54,6 +54,8 @@
> #include <asm/uv/uv.h>
> #include <asm/setup.h>
>
> +#include "mm_internal.h"
> +
> static int __init parse_direct_gbpages_off(char *arg)
> {
> direct_gbpages = 0;
> @@ -314,36 +316,6 @@ void __init cleanup_highmap(void)
> }
> }
>
> -static __ref void *alloc_low_page(void)
> -{
> - unsigned long pfn;
> - void *adr;
> -
> - if (after_bootmem) {
> - adr = (void *)get_zeroed_page(GFP_ATOMIC | __GFP_NOTRACK);
> -
> - return adr;
> - }
> -
> - if ((pgt_buf_end + 1) >= pgt_buf_top) {
> - unsigned long ret;
> - if (min_pfn_mapped >= max_pfn_mapped)
> - panic("alloc_low_page: ran out of memory");
> - ret = memblock_find_in_range(min_pfn_mapped << PAGE_SHIFT,
> - max_pfn_mapped << PAGE_SHIFT,
> - PAGE_SIZE, PAGE_SIZE);
> - if (!ret)
> - panic("alloc_low_page: can not alloc memory");
> - memblock_reserve(ret, PAGE_SIZE);
> - pfn = ret >> PAGE_SHIFT;
> - } else
> - pfn = pgt_buf_end++;
> -
> - adr = __va(pfn * PAGE_SIZE);
> - clear_page(adr);
> - return adr;
> -}
> -
> static unsigned long __meminit
> phys_pte_init(pte_t *pte_page, unsigned long addr, unsigned long end,
> pgprot_t prot)
> diff --git a/arch/x86/mm/mm_internal.h b/arch/x86/mm/mm_internal.h
> new file mode 100644
> index 0000000..b3f993a
> --- /dev/null
> +++ b/arch/x86/mm/mm_internal.h
> @@ -0,0 +1,6 @@
> +#ifndef __X86_MM_INTERNAL_H
> +#define __X86_MM_INTERNAL_H
> +
> +void *alloc_low_page(void);
> +
> +#endif /* __X86_MM_INTERNAL_H */
> --
> 1.7.7
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2012-10-22 15:24 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-18 20:50 [PATCH -v5 00/19] x86: Use BRK to pre mapping page table to make xen happy Yinghai Lu
2012-10-18 20:50 ` [PATCH 1/3] ACPI: Introduce a new acpi handle to determine HID match Yinghai Lu
2012-11-02 12:23 ` Rafael J. Wysocki
2012-11-02 15:03 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 01/19] x86, mm: Align start address to correct big page size Yinghai Lu
2012-10-22 14:16 ` Konrad Rzeszutek Wilk
2012-10-22 16:31 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 2/3] PCI: correctly detect ACPI PCI host bridge objects Yinghai Lu
2012-10-26 9:10 ` Bjorn Helgaas
2012-10-26 18:13 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 02/19] x86, mm: Use big page size for small memory range Yinghai Lu
2012-10-22 14:21 ` Konrad Rzeszutek Wilk
2012-10-22 16:33 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 3/3] PCI, ACPI: debug print for installation of acpi root bridge's notifier Yinghai Lu
2012-10-18 20:50 ` [PATCH 03/19] x86, mm: Don't clear page table if range is ram Yinghai Lu
2012-10-22 14:28 ` Konrad Rzeszutek Wilk
2012-10-22 16:56 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 04/19] x86, mm: only keep initial mapping for ram Yinghai Lu
2012-10-22 14:33 ` Konrad Rzeszutek Wilk
2012-10-22 17:43 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 05/19] x86, mm: Break down init_all_memory_mapping Yinghai Lu
2012-10-18 20:50 ` [PATCH 06/19] x86, mm: setup page table in top-down Yinghai Lu
2012-10-19 16:24 ` Stefano Stabellini
2012-10-19 16:41 ` Yinghai Lu
2012-10-22 13:19 ` Stefano Stabellini
2012-10-22 18:17 ` Yinghai Lu
2012-10-22 18:22 ` Yinghai Lu
2012-10-23 12:16 ` Stefano Stabellini
2012-10-23 18:47 ` Yinghai Lu
2012-10-23 12:22 ` Stefano Stabellini
2012-10-23 18:37 ` Yinghai Lu
2012-10-24 10:55 ` Stefano Stabellini
2012-10-22 14:14 ` Konrad Rzeszutek Wilk
2012-10-22 15:06 ` Konrad Rzeszutek Wilk
2012-10-22 18:56 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 07/19] x86, mm: Remove early_memremap workaround for page table accessing on 64bit Yinghai Lu
2012-10-22 15:07 ` Konrad Rzeszutek Wilk
2012-10-22 19:08 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 08/19] x86, mm: Remove parameter in alloc_low_page for 64bit Yinghai Lu
2012-10-22 15:09 ` Konrad Rzeszutek Wilk
2012-10-22 19:09 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 09/19] x86, mm: Merge alloc_low_page between 64bit and 32bit Yinghai Lu
2012-10-22 15:11 ` Konrad Rzeszutek Wilk [this message]
2012-10-22 19:14 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 10/19] x86, mm: Move min_pfn_mapped back to mm/init.c Yinghai Lu
2012-10-18 20:50 ` [PATCH 11/19] x86, mm, xen: Remove mapping_pagatable_reserve Yinghai Lu
2012-10-22 15:14 ` Konrad Rzeszutek Wilk
2012-10-22 19:18 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 12/19] x86, mm: Add alloc_low_pages(num) Yinghai Lu
2012-10-22 15:17 ` Konrad Rzeszutek Wilk
2012-10-22 19:24 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 13/19] x86, mm: only call early_ioremap_page_table_range_init() once Yinghai Lu
2012-10-22 15:24 ` Konrad Rzeszutek Wilk
2012-10-22 19:40 ` Yinghai Lu
2012-10-23 0:01 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 14/19] x86, mm: Move back pgt_buf_* to mm/init.c Yinghai Lu
2012-10-18 20:50 ` [PATCH 15/19] x86, mm: Move init_gbpages() out of setup.c Yinghai Lu
2012-10-18 20:50 ` [PATCH 16/19] x86, mm: change low/hignmem_pfn_init to static on 32bit Yinghai Lu
2012-10-18 20:50 ` [PATCH 17/19] x86, mm: Move function declaration into mm_internal.h Yinghai Lu
2012-10-18 20:50 ` [PATCH 18/19] x86, mm: Let "memmap=" take more entries one time Yinghai Lu
2012-10-22 15:19 ` Konrad Rzeszutek Wilk
2012-10-22 19:26 ` Yinghai Lu
2012-10-18 20:50 ` [PATCH 19/19] x86, mm: Add check before clear pte above max_low_pfn on 32bit Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121022151149.GD22780@phenom.dumpdata.com \
--to=konrad@kernel.org \
--cc=hpa@zytor.com \
--cc=jacob.shin@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=stefano.stabellini@eu.citrix.com \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox