From: Daniel J Blueman <daniel@numascale-asia.com>
To: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>,
H Peter Anvin <hpa@zytor.com>,
Steffen Persvold <sp@numascale.com>,
x86@kernel.org, linux-kernel@vger.kernel.org,
Daniel J Blueman <daniel@numascale-asia.com>
Subject: [PATCH 1/4, v4] AMD64 EDAC: Add multi-domain support to AMD EDAC
Date: Wed, 31 Oct 2012 13:55:29 +0800 [thread overview]
Message-ID: <1351662932-22279-1-git-send-email-daniel@numascale-asia.com> (raw)
Fix the handling of memory controller detection to index the array
of detected Northbridges, allowing memory controllers over multiple
PCI domains in federated systems eg using Numascale's NumaConnect/
NumaChip.
v4: Generate linear Northbridge ID by indexing detected Northbridges
Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com>
---
arch/x86/include/asm/amd_nb.h | 12 ++++++++++++
drivers/edac/amd64_edac.c | 18 ++++++++++++++----
drivers/edac/amd64_edac.h | 6 ------
3 files changed, 26 insertions(+), 10 deletions(-)
diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h
index b3341e9..b88fc7a 100644
--- a/arch/x86/include/asm/amd_nb.h
+++ b/arch/x86/include/asm/amd_nb.h
@@ -81,6 +81,19 @@ static inline struct amd_northbridge *node_to_amd_nb(int node)
return (node < amd_northbridges.num) ? &amd_northbridges.nb[node] : NULL;
}
+static inline u16 get_node_id(struct pci_dev *pdev)
+{
+ int i;
+
+ for (i = 0; i != amd_nb_num(); i++)
+ if (pci_domain_nr(node_to_amd_nb(i)->misc->bus) == pci_domain_nr(pdev->bus) &&
+ PCI_SLOT(node_to_amd_nb(i)->misc->devfn) == PCI_SLOT(pdev->devfn))
+ return i;
+
+ WARN(1, "Unable to find AMD Northbridge identifier\n");
+ return 0;
+}
+
#else
#define amd_nb_num(x) 0
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index cc8e7c7..18d404a 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -982,6 +982,9 @@ static u64 get_error_address(struct mce *m)
return addr;
}
+static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt);
+static struct pci_dev *pci_get_related_function(unsigned int vendor, unsigned int device, struct pci_dev *related);
+
static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
@@ -1001,11 +1004,17 @@ static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
/* Factor in CC6 save area by reading dst node's limit reg */
if (c->x86 == 0x15) {
- struct pci_dev *f1 = NULL;
- u8 nid = dram_dst_node(pvt, range);
+ struct pci_dev *misc, *f1 = NULL;
+ struct amd64_family_type *fam_type;
+ u16 nid = dram_dst_node(pvt, range);
u32 llim;
- f1 = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0x18 + nid, 1));
+ misc = node_to_amd_nb(nid)->misc;
+ fam_type = amd64_per_family_init(pvt);
+ if (WARN_ON(!f1))
+ return;
+
+ f1 = pci_get_related_function(misc->vendor, fam_type->f1_id, misc);
if (WARN_ON(!f1))
return;
@@ -1720,7 +1729,8 @@ static struct pci_dev *pci_get_related_function(unsigned int vendor,
dev = pci_get_device(vendor, device, dev);
while (dev) {
- if ((dev->bus->number == related->bus->number) &&
+ if (pci_domain_nr(dev->bus) == pci_domain_nr(related->bus) &&
+ (dev->bus->number == related->bus->number) &&
(PCI_SLOT(dev->devfn) == PCI_SLOT(related->devfn)))
break;
dev = pci_get_device(vendor, device, dev);
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 8d48047..90cae61 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -290,12 +290,6 @@
/* MSRs */
#define MSR_MCGCTL_NBE BIT(4)
-/* AMD sets the first MC device at device ID 0x18. */
-static inline u8 get_node_id(struct pci_dev *pdev)
-{
- return PCI_SLOT(pdev->devfn) - 0x18;
-}
-
enum amd_families {
K8_CPUS = 0,
F10_CPUS,
--
1.7.9.5
next reply other threads:[~2012-10-31 5:56 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-31 5:55 Daniel J Blueman [this message]
2012-10-31 5:55 ` [PATCH 2/4] AMD64 EDAC: Add support for >255 memory controllers Daniel J Blueman
2012-10-31 8:18 ` Torsten Kaiser
2012-10-31 8:20 ` Daniel J Blueman
2012-10-31 8:48 ` [PATCH 2/4, v2] " Daniel J Blueman
2012-10-31 18:55 ` Borislav Petkov
2012-10-31 5:55 ` [PATCH 3/4] AMD64 EDAC: Cleanup type usage to be consistent Daniel J Blueman
2012-10-31 19:38 ` Borislav Petkov
2012-10-31 5:55 ` [PATCH 4/4] AMD64 EDAC: Use appropriate name for NB indexing Daniel J Blueman
2012-10-31 19:39 ` Borislav Petkov
2012-10-31 12:03 ` [PATCH 1/4, v4] AMD64 EDAC: Add multi-domain support to AMD EDAC Borislav Petkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351662932-22279-1-git-send-email-daniel@numascale-asia.com \
--to=daniel@numascale-asia.com \
--cc=bp@alien8.de \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=sp@numascale.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox