* [PATCH v2] regulator: lp8755: Fix mask for pchip->mphase
@ 2012-12-26 3:56 Axel Lin
0 siblings, 0 replies; only message in thread
From: Axel Lin @ 2012-12-26 3:56 UTC (permalink / raw)
To: Mark Brown; +Cc: Daniel Jeong, Liam Girdwood, linux-kernel
According to the datasheet, it has 9 multi-phase mode from 0 to 8 and it takes
4 bits in the register.
The mask for pchip->mphase should be 0x0F.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
v2. the mask should be 0x0f rather than 0x17.
drivers/regulator/lp8755.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c
index 06a82e2..6d5a11d 100644
--- a/drivers/regulator/lp8755.c
+++ b/drivers/regulator/lp8755.c
@@ -301,7 +301,7 @@ static int lp8755_init_data(struct lp8755_chip *pchip)
ret = lp8755_read(pchip, 0x3D, ®val);
if (ret < 0)
goto out_i2c_error;
- pchip->mphase = regval & 0x07;
+ pchip->mphase = regval & 0x0F;
/* set default data based on multi-phase config */
for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
--
1.7.9.5
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2012-12-26 3:56 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-12-26 3:56 [PATCH v2] regulator: lp8755: Fix mask for pchip->mphase Axel Lin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox