* [PATCH RESEND] ARM: dts: Add USBPHY nodes to Exynos4x12
@ 2013-08-05 18:18 Dongjin Kim
2013-08-06 6:09 ` Sachin Kamat
0 siblings, 1 reply; 3+ messages in thread
From: Dongjin Kim @ 2013-08-05 18:18 UTC (permalink / raw)
Cc: Dongjin Kim, Sachin Kamat, Rob Herring, Pawel Moll, Mark Rutland,
Stephen Warren, Ian Campbell, Russell King, Kukjin Kim,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
This patch adds device nodes for USBPHY to Exynos4x12.
CC: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
---
arch/arm/boot/dts/exynos4x12.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 01da194..9c3335b 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -73,4 +73,22 @@
clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};
+
+ usbphy@125B00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "samsung,exynos4x12-usb2phy";
+ reg = <0x125B0000 0x100>;
+ ranges;
+
+ clocks = <&clock 2>, <&clock 305>;
+ clock-names = "xusbxti", "otg";
+ status = "disabled";
+
+ usbphy-sys {
+ /* USB device and host PHY_CONTROL registers */
+ reg = <0x10020704 0xc>,
+ <0x1001021c 0x4>;
+ };
+ };
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH RESEND] ARM: dts: Add USBPHY nodes to Exynos4x12
2013-08-05 18:18 [PATCH RESEND] ARM: dts: Add USBPHY nodes to Exynos4x12 Dongjin Kim
@ 2013-08-06 6:09 ` Sachin Kamat
2013-08-06 16:48 ` Dongjin Kim
0 siblings, 1 reply; 3+ messages in thread
From: Sachin Kamat @ 2013-08-06 6:09 UTC (permalink / raw)
To: Dongjin Kim
Cc: Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren,
Ian Campbell, Russell King, Kukjin Kim, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
Hi Dongjin,
On 5 August 2013 23:48, Dongjin Kim <tobetter@gmail.com> wrote:
> This patch adds device nodes for USBPHY to Exynos4x12.
>
> CC: Sachin Kamat <sachin.kamat@linaro.org>
> Signed-off-by: Dongjin Kim <tobetter@gmail.com>
> ---
> arch/arm/boot/dts/exynos4x12.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
> index 01da194..9c3335b 100644
> --- a/arch/arm/boot/dts/exynos4x12.dtsi
> +++ b/arch/arm/boot/dts/exynos4x12.dtsi
> @@ -73,4 +73,22 @@
> clock-names = "sclk_fimg2d", "fimg2d";
> status = "disabled";
> };
> +
> + usbphy@125B00000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "samsung,exynos4x12-usb2phy";
> + reg = <0x125B0000 0x100>;
> + ranges;
> +
> + clocks = <&clock 2>, <&clock 305>;
> + clock-names = "xusbxti", "otg";
> + status = "disabled";
I don't think this node has any other board specific dependencies. In
that case you don't need to disable this.
> +
> + usbphy-sys {
> + /* USB device and host PHY_CONTROL registers */
> + reg = <0x10020704 0xc>,
> + <0x1001021c 0x4>;
> + };
> + };
> };
> --
> 1.7.9.5
>
--
With warm regards,
Sachin
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH RESEND] ARM: dts: Add USBPHY nodes to Exynos4x12
2013-08-06 6:09 ` Sachin Kamat
@ 2013-08-06 16:48 ` Dongjin Kim
0 siblings, 0 replies; 3+ messages in thread
From: Dongjin Kim @ 2013-08-06 16:48 UTC (permalink / raw)
To: Sachin Kamat
Cc: Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren,
Ian Campbell, Russell King, Kukjin Kim, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
Aha, yes...my misunderstanding.
This node is not only for OTG or HSIC, could miss USB HOST transceiver
if certain board file does not set "okay".
Thanks,
Dongjin.
On Tue, Aug 6, 2013 at 3:09 PM, Sachin Kamat <sachin.kamat@linaro.org> wrote:
> Hi Dongjin,
>
> On 5 August 2013 23:48, Dongjin Kim <tobetter@gmail.com> wrote:
>> This patch adds device nodes for USBPHY to Exynos4x12.
>>
>> CC: Sachin Kamat <sachin.kamat@linaro.org>
>> Signed-off-by: Dongjin Kim <tobetter@gmail.com>
>> ---
>> arch/arm/boot/dts/exynos4x12.dtsi | 18 ++++++++++++++++++
>> 1 file changed, 18 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
>> index 01da194..9c3335b 100644
>> --- a/arch/arm/boot/dts/exynos4x12.dtsi
>> +++ b/arch/arm/boot/dts/exynos4x12.dtsi
>> @@ -73,4 +73,22 @@
>> clock-names = "sclk_fimg2d", "fimg2d";
>> status = "disabled";
>> };
>> +
>> + usbphy@125B00000 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "samsung,exynos4x12-usb2phy";
>> + reg = <0x125B0000 0x100>;
>> + ranges;
>> +
>> + clocks = <&clock 2>, <&clock 305>;
>> + clock-names = "xusbxti", "otg";
>> + status = "disabled";
>
> I don't think this node has any other board specific dependencies. In
> that case you don't need to disable this.
>
>> +
>> + usbphy-sys {
>> + /* USB device and host PHY_CONTROL registers */
>> + reg = <0x10020704 0xc>,
>> + <0x1001021c 0x4>;
>> + };
>> + };
>> };
>> --
>> 1.7.9.5
>>
>
>
>
> --
> With warm regards,
> Sachin
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-08-06 16:48 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-08-05 18:18 [PATCH RESEND] ARM: dts: Add USBPHY nodes to Exynos4x12 Dongjin Kim
2013-08-06 6:09 ` Sachin Kamat
2013-08-06 16:48 ` Dongjin Kim
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox