From: Nicolin Chen <b42378@freescale.com>
To: <timur@tabi.org>, <broonie@kernel.org>, <linux@arm.linux.org.uk>
Cc: <linux-kernel@vger.kernel.org>, <linuxppc-dev@lists.ozlabs.org>,
<alsa-devel@alsa-project.org>, <lgirdwood@gmail.com>
Subject: [PATCH v2] ASoC: fsl_ssi: Add monaural audio support for non-ac97 interface
Date: Sat, 16 Nov 2013 00:25:29 +0800 [thread overview]
Message-ID: <1384532729-6588-1-git-send-email-b42378@freescale.com> (raw)
The normal mode of SSI allows it to send/receive data to/from the first
slot of each period. So we can use this normal mode to trick I2S signal
by puting/getting data to/from the first slot only (the left channel)
so as to support monaural audio playback and recording.
Signed-off-by: Nicolin Chen <b42378@freescale.com>
---
Changelog
v2:
* Moved i2s_mode to ssi_private so that we can save and retore it as needed
* And dropped the horrible static thing.
sound/soc/fsl/fsl_ssi.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index f43be6d..cba5c4d 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -144,6 +144,7 @@ struct fsl_ssi_private {
bool imx_ac97;
bool use_dma;
bool use_dual_fifo;
+ u8 i2s_mode;
struct clk *clk;
struct snd_dmaengine_dai_dma_data dma_params_tx;
struct snd_dmaengine_dai_dma_data dma_params_rx;
@@ -325,14 +326,13 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
static int fsl_ssi_setup(struct fsl_ssi_private *ssi_private)
{
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
- u8 i2s_mode;
u8 wm;
int synchronous = ssi_private->cpu_dai_drv.symmetric_rates;
if (ssi_private->imx_ac97)
- i2s_mode = CCSR_SSI_SCR_I2S_MODE_NORMAL | CCSR_SSI_SCR_NET;
+ ssi_private->i2s_mode = CCSR_SSI_SCR_I2S_MODE_NORMAL | CCSR_SSI_SCR_NET;
else
- i2s_mode = CCSR_SSI_SCR_I2S_MODE_SLAVE;
+ ssi_private->i2s_mode = CCSR_SSI_SCR_I2S_MODE_SLAVE;
/*
* Section 16.5 of the MPC8610 reference manual says that the SSI needs
@@ -349,7 +349,7 @@ static int fsl_ssi_setup(struct fsl_ssi_private *ssi_private)
write_ssi_mask(&ssi->scr,
CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN,
CCSR_SSI_SCR_TFR_CLK_DIS |
- i2s_mode |
+ ssi_private->i2s_mode |
(synchronous ? CCSR_SSI_SCR_SYN : 0));
write_ssi(CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 |
@@ -517,6 +517,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
{
struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
+ unsigned int channels = params_channels(hw_params);
unsigned int sample_size =
snd_pcm_format_width(params_format(hw_params));
u32 wl = CCSR_SSI_SxCCR_WL(sample_size);
@@ -546,6 +547,11 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
else
write_ssi_mask(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl);
+ if (!ssi_private->imx_ac97)
+ write_ssi_mask(&ssi->scr,
+ CCSR_SSI_SCR_NET | CCSR_SSI_SCR_I2S_MODE_MASK,
+ channels == 1 ? 0 : ssi_private->i2s_mode);
+
return 0;
}
@@ -658,14 +664,13 @@ static const struct snd_soc_dai_ops fsl_ssi_dai_ops = {
static struct snd_soc_dai_driver fsl_ssi_dai_template = {
.probe = fsl_ssi_dai_probe,
.playback = {
- /* The SSI does not support monaural audio. */
- .channels_min = 2,
+ .channels_min = 1,
.channels_max = 2,
.rates = FSLSSI_I2S_RATES,
.formats = FSLSSI_I2S_FORMATS,
},
.capture = {
- .channels_min = 2,
+ .channels_min = 1,
.channels_max = 2,
.rates = FSLSSI_I2S_RATES,
.formats = FSLSSI_I2S_FORMATS,
--
1.8.4
next reply other threads:[~2013-11-15 16:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-15 16:25 Nicolin Chen [this message]
2013-12-02 11:56 ` [PATCH v2] ASoC: fsl_ssi: Add monaural audio support for non-ac97 interface Mark Brown
2013-12-02 15:21 ` Nicolin Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384532729-6588-1-git-send-email-b42378@freescale.com \
--to=b42378@freescale.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=timur@tabi.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox