From: Thor Thayer <tthayer@altera.com>
To: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: <robherring2@gmail.com>, <dougthompson@xmission.com>,
<grant.likely@linaro.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <rob@landley.net>,
<linux@arm.linux.org.uk>, <dinguyen@altera.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-doc@vger.kernel.org>
Subject: Re: [PATCH 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller
Date: Tue, 8 Apr 2014 09:29:50 -0500 [thread overview]
Message-ID: <1396967390.23349.15.camel@dinh-ubuntu> (raw)
In-Reply-To: <20140408133818.GB16054@pengutronix.de>
On Tue, 2014-04-08 at 15:38 +0200, Steffen Trumtrar wrote:
> Hi!
>
> On Mon, Apr 07, 2014 at 04:54:07PM -0500, tthayer@altera.com wrote:
> > From: Thor Thayer <tthayer@altera.com>
> >
> > Addition of the Altera SDRAM controller bindings and device
> > tree changes to the Altera SoC project.
> >
[snip]
> > +
> > +Required properties:
> > +- compatible : "altr,sdr-ctl", "syscon";
> > + Note that syscon is invoked for this device to support the FPGA
> > + bridge driver, EDAC driver and other devices that share the
> > + registers.
> > +- reg : Should contain 1 register ranges(address and length)
>
> I haven't really thought this through, but why would the FPGA bridge driver
> access the sdram controller? For releasing the resets in fpgaportrst ? Or is
> there more?
Hi Steffan. No, not for resets. We need to enable the FPGA to SDRAM
path. Our SDRAM controller allows FPGA master access to the SDRAM.
> Wouldn't it be more appropriate to represent those bits as a reset-controller to
> some hypothetical IP core driver?
> Then you could have something like
>
> hps2fpga@c0000000 {
> ipcore@0 {
> resets = <&sdr 1>;
> reset-names = "foo";
> resets = <&rst 96>;
> reset-names = "bar";
> (...)
> };
>
> ipcore@1000 {
> resets = <&rst 96>;
> reset-names = "baz";
> (...)
> };
> };
>
> And you would always have the correct bridges released out of reset for your
> IP core. Does the FPGA bridge driver do more? I think that is basically it.
> Where we maybe could run into problems though is the early_init stuff.
>
> I think syscon is nice for some things, but we should try not to overuse it.
Understood. In this case, syscon seems to be appropriate.
>
> Regards,
> Steffen
>
> > +Example:
> > + sdrctl@ffc25000 {
> > + compatible = "altr,sdr-ctl", "syscon";
> > + reg = <0xffc25000 0x1000>;
> > + };
> > diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> > index df43702..6ce912e 100644
> > --- a/arch/arm/boot/dts/socfpga.dtsi
> > +++ b/arch/arm/boot/dts/socfpga.dtsi
> > @@ -676,6 +676,11 @@
> > clocks = <&l4_sp_clk>;
> > };
> >
> > + sdrctl@ffc25000 {
> > + compatible = "altr,sdr-ctl", "syscon";
> > + reg = <0xffc25000 0x1000>;
> > + };
> > +
> > rstmgr@ffd05000 {
> > compatible = "altr,rst-mgr";
> > reg = <0xffd05000 0x1000>;
>
next prev parent reply other threads:[~2014-04-08 14:24 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1396907649-20212-1-git-send-email-tthayer@altera.com>
2014-04-07 21:54 ` [PATCH 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller tthayer
2014-04-08 10:48 ` Mark Rutland
2014-04-08 13:38 ` Steffen Trumtrar
2014-04-08 14:29 ` Thor Thayer [this message]
2014-04-08 14:33 ` Steffen Trumtrar
2014-04-08 16:02 ` delicious quinoa
2014-04-08 18:52 ` Rob Herring
2014-04-11 14:21 ` Thor Thayer
2014-04-11 14:43 ` Thor Thayer
2014-04-11 14:49 ` Thor Thayer
2014-07-10 21:02 ` Alan Tull
2014-04-07 21:54 ` [PATCH 2/3] dts: socfpga: Add bindings for Altera SoC SDRAM EDAC tthayer
2014-04-08 10:51 ` Mark Rutland
2014-04-07 21:54 ` [PATCH 3/3] edac: altera: Add SDRAM EDAC support for CycloneV/ArriaV tthayer
2014-04-08 10:08 ` Borislav Petkov
2014-04-08 13:57 ` Thor Thayer
2014-04-08 15:24 ` Borislav Petkov
2014-04-08 15:40 ` Mark Rutland
2014-04-08 16:03 ` Borislav Petkov
2014-04-08 16:10 ` Mark Rutland
2014-04-08 16:22 ` Borislav Petkov
2014-04-08 21:15 ` Thor Thayer
2014-04-08 10:45 ` Mark Rutland
2014-04-08 12:45 ` Steffen Trumtrar
2014-04-08 14:00 ` Thor Thayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1396967390.23349.15.camel@dinh-ubuntu \
--to=tthayer@altera.com \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@altera.com \
--cc=dougthompson@xmission.com \
--cc=galak@codeaurora.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob@landley.net \
--cc=robherring2@gmail.com \
--cc=s.trumtrar@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox