Re: [PATCH] mfd: sec-irq: fix support for devices without irq specified

[Krzysztof Kozlowski <k.kozlowski@samsung.com>]

On pią, 2014-08-08 at 09:34 +0200, Krzysztof Kozlowski wrote:
> On czw, 2014-08-07 at 18:48 +0200, Bartlomiej Zolnierkiewicz wrote:
> > [ added missing linux-samsung-soc ML, sorry for the noise ]
> > 
> > On Thursday, August 07, 2014 06:42:28 PM Bartlomiej Zolnierkiewicz wrote:
> > > Add missing check for the case of device without irq specified
> > > in sec_irq_exit() (please note that sec_irq_init() already
> > > correctly handles such devices).
> > > 
> > > This is needed for Insignal's Exynos4412 based Origen board.
> > > 
> > > Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > > Cc: Sangbeom Kim <sbkim73@samsung.com>
> > > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> > > Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> > > ---
> > > patch is against next-20140804 branch of linux-next kernel
> > > 
> > >  drivers/mfd/sec-irq.c | 3 ++-
> > >  1 file changed, 2 insertions(+), 1 deletion(-)
> Looks and works good (tested on board with S2MPS14).
> 
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> 
> Best regards,
> Krzysztof
> 
> > > 
> > > diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
> > > index f9a5786..b65a7f0 100644
> > > --- a/drivers/mfd/sec-irq.c
> > > +++ b/drivers/mfd/sec-irq.c
> > > @@ -478,5 +478,6 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
> > >  
> > >  void sec_irq_exit(struct sec_pmic_dev *sec_pmic)
> > >  {
> > > -	regmap_del_irq_chip(sec_pmic->irq, sec_pmic->irq_data);
> > > +	if (sec_pmic->irq)
> > > +		regmap_del_irq_chip(sec_pmic->irq, sec_pmic->irq_data);
> > >  }

Seems I jumped too far with this one. Patch looks OK and works fine but
is it really needed? If (!sec_pmic->irq) then sec_pmic->irq_data will be
NULL and regmap_del_irq_chip() will handle it correctly.

Your change adds some sense of precautions (the sec_pmic->irq_data may
be set by some other module by mistake) but still it does not look like
"needed" for Origen.

Best regards,
Krzysztof