From: Denys Vlasenko <dvlasenk@redhat.com>
To: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
Steven Rostedt <rostedt@goodmis.org>,
Ingo Molnar <mingo@kernel.org>, Borislav Petkov <bp@alien8.de>,
"H. Peter Anvin" <hpa@zytor.com>, Oleg Nesterov <oleg@redhat.com>,
Frederic Weisbecker <fweisbec@gmail.com>,
Alexei Starovoitov <ast@plumgrid.com>,
Will Drewry <wad@chromium.org>, Kees Cook <keescook@chromium.org>,
x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 7/7 v2] x86: save user %rsp in pt_regs->sp
Date: Wed, 25 Feb 2015 01:00:19 +0100 [thread overview]
Message-ID: <1424822419-10267-7-git-send-email-dvlasenk@redhat.com> (raw)
In-Reply-To: <1424822419-10267-1-git-send-email-dvlasenk@redhat.com>
PER_CPU(old_rsp) usage is simplified - now it is used only
as temp storage, and userspace stack pointer is immediately stored
in pt_regs->sp on syscall entry, instead of being used later,
on syscall exit. This allows to get rid of thread_struct::usersp.
The lazy store of pt_regs->cs and pt_regs->ss is retained -
tests have shown that these insns do take ~2 cycles on fast path.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Linus Torvalds <torvalds@linux-foundation.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Ingo Molnar <mingo@kernel.org>
CC: Borislav Petkov <bp@alien8.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Alexei Starovoitov <ast@plumgrid.com>
CC: Will Drewry <wad@chromium.org>
CC: Kees Cook <keescook@chromium.org>
CC: x86@kernel.org
CC: linux-kernel@vger.kernel.org
---
arch/x86/include/asm/compat.h | 2 +-
arch/x86/include/asm/processor.h | 6 ------
arch/x86/include/asm/ptrace.h | 8 ++------
arch/x86/kernel/entry_64.S | 22 +++++++++-------------
arch/x86/kernel/perf_regs.c | 2 +-
arch/x86/kernel/process_64.c | 8 +-------
6 files changed, 14 insertions(+), 34 deletions(-)
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index 59c6c40..acdee09 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -301,7 +301,7 @@ static inline void __user *arch_compat_alloc_user_space(long len)
sp = task_pt_regs(current)->sp;
} else {
/* -128 for the x32 ABI redzone */
- sp = this_cpu_read(old_rsp) - 128;
+ sp = task_pt_regs(current)->sp - 128;
}
return (void __user *)round_down(sp - len, 16);
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index a092a0c..ce4aadf 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -474,7 +474,6 @@ struct thread_struct {
#ifdef CONFIG_X86_32
unsigned long sysenter_cs;
#else
- unsigned long usersp; /* Copy from PDA */
unsigned short es;
unsigned short ds;
unsigned short fsindex;
@@ -935,11 +934,6 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk);
#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.sp0 - 1)
extern unsigned long KSTK_ESP(struct task_struct *task);
-/*
- * User space RSP while inside the SYSCALL fast path
- */
-DECLARE_PER_CPU(unsigned long, old_rsp);
-
#endif /* CONFIG_X86_64 */
extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index 4077d96..74bb2e0 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -145,12 +145,8 @@ static inline bool user_64bit_mode(struct pt_regs *regs)
#endif
}
-#define current_user_stack_pointer() this_cpu_read(old_rsp)
-/* ia32 vs. x32 difference */
-#define compat_user_stack_pointer() \
- (test_thread_flag(TIF_IA32) \
- ? current_pt_regs()->sp \
- : this_cpu_read(old_rsp))
+#define current_user_stack_pointer() current_pt_regs()->sp
+#define compat_user_stack_pointer() current_pt_regs()->sp
#endif
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 2091e2e..c0352914 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -128,8 +128,6 @@ ENDPROC(native_usergs_sysret64)
* manipulation.
*/
.macro FIXUP_TOP_OF_STACK tmp offset=0
- movq PER_CPU_VAR(old_rsp),\tmp
- movq \tmp,RSP+\offset(%rsp)
movq $__USER_DS,SS+\offset(%rsp)
movq $__USER_CS,CS+\offset(%rsp)
movq RIP+\offset(%rsp),\tmp /* get rip */
@@ -139,8 +137,7 @@ ENDPROC(native_usergs_sysret64)
.endm
.macro RESTORE_TOP_OF_STACK tmp offset=0
- movq RSP+\offset(%rsp),\tmp
- movq \tmp,PER_CPU_VAR(old_rsp)
+ /* nothing to do */
.endm
/*
@@ -222,9 +219,6 @@ ENDPROC(native_usergs_sysret64)
* Interrupts are off on entry.
* Only called from user space.
*
- * XXX if we had a free scratch register we could save the RSP into the stack frame
- * and report it properly in ps. Unfortunately we haven't.
- *
* When user can change the frames always force IRET. That is because
* it deals with uncanonical addresses better. SYSRET has trouble
* with them due to bugs in both AMD and Intel CPUs.
@@ -253,11 +247,13 @@ GLOBAL(system_call_after_swapgs)
*/
ENABLE_INTERRUPTS(CLBR_NONE)
ALLOC_PT_GPREGS_ON_STACK 6*8 /* 6*8: space for orig_ax and iret frame */
+ movq %rcx,RIP(%rsp)
+ movq %r11,EFLAGS(%rsp)
+ movq PER_CPU_VAR(old_rsp),%rcx
+ movq %rcx,RSP(%rsp)
+ movq_cfi rax,ORIG_RAX
SAVE_C_REGS_EXCEPT_RAX_RCX_R11
movq $-ENOSYS,RAX(%rsp)
- movq_cfi rax,ORIG_RAX
- movq %r11,EFLAGS(%rsp)
- movq %rcx,RIP(%rsp)
CFI_REL_OFFSET rip,RIP
testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,SIZEOF_PTREGS)
jnz tracesys
@@ -293,7 +289,7 @@ ret_from_sys_call:
CFI_REGISTER rip,rcx
movq EFLAGS(%rsp),%r11
/*CFI_REGISTER rflags,r11*/
- movq PER_CPU_VAR(old_rsp), %rsp
+ movq RSP(%rsp),%rsp
/*
* 64bit SYSRET restores rip from rcx,
* rflags from r11 (but RF and VM bits are forced to 0),
@@ -307,7 +303,7 @@ int_ret_from_sys_call_fixup:
FIXUP_TOP_OF_STACK %r11
jmp int_ret_from_sys_call
- /* Do syscall tracing */
+ /* Do syscall entry tracing */
tracesys:
movq %rsp, %rdi
movl $AUDIT_ARCH_X86_64, %esi
@@ -346,7 +342,7 @@ tracesys_phase2:
/*
* Syscall return path ending with IRET.
- * Has correct top of stack, but partial stack frame.
+ * Has correct iret frame.
*/
GLOBAL(int_ret_from_sys_call)
DISABLE_INTERRUPTS(CLBR_NONE)
diff --git a/arch/x86/kernel/perf_regs.c b/arch/x86/kernel/perf_regs.c
index 781861c..02a8720 100644
--- a/arch/x86/kernel/perf_regs.c
+++ b/arch/x86/kernel/perf_regs.c
@@ -177,7 +177,7 @@ void perf_get_regs_user(struct perf_regs *regs_user,
* than just blindly copying user_regs.
*/
regs_user->abi = PERF_SAMPLE_REGS_ABI_64;
- regs_user_copy->sp = this_cpu_read(old_rsp);
+ regs_user_copy->sp = user_regs->sp;
regs_user_copy->cs = __USER_CS;
regs_user_copy->ss = __USER_DS;
regs_user_copy->cx = -1; /* usually contains garbage */
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 975d342..ab79139 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -161,7 +161,6 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
p->thread.sp0 = (unsigned long)task_stack_page(p) + THREAD_SIZE;
childregs = task_pt_regs(p);
p->thread.sp = (unsigned long) childregs;
- p->thread.usersp = me->thread.usersp;
set_tsk_thread_flag(p, TIF_FORK);
p->thread.io_bitmap_ptr = NULL;
@@ -235,10 +234,8 @@ start_thread_common(struct pt_regs *regs, unsigned long new_ip,
loadsegment(es, _ds);
loadsegment(ds, _ds);
load_gs_index(0);
- current->thread.usersp = new_sp;
regs->ip = new_ip;
regs->sp = new_sp;
- this_cpu_write(old_rsp, new_sp);
regs->cs = _cs;
regs->ss = _ss;
regs->flags = X86_EFLAGS_IF;
@@ -401,8 +398,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
/*
* Switch the PDA and FPU contexts.
*/
- prev->usersp = this_cpu_read(old_rsp);
- this_cpu_write(old_rsp, next->usersp);
this_cpu_write(current_task, next_p);
/*
@@ -601,6 +596,5 @@ long sys_arch_prctl(int code, unsigned long addr)
unsigned long KSTK_ESP(struct task_struct *task)
{
- return (test_tsk_thread_flag(task, TIF_IA32)) ?
- (task_pt_regs(task)->sp) : ((task)->thread.usersp);
+ return task_pt_regs(task)->sp;
}
--
1.8.1.4
next prev parent reply other threads:[~2015-02-25 0:02 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-25 0:00 [PATCH 1/7] x86: ia32entry.S: use more understandable constant Denys Vlasenko
2015-02-25 0:00 ` [PATCH 2/7] x86: entry.S: simplify optimistic SYSRET Denys Vlasenko
2015-02-25 0:04 ` Andy Lutomirski
2015-02-25 0:31 ` Denys Vlasenko
2015-02-25 0:00 ` [PATCH 3/7] x86: entry.S: use smaller insns Denys Vlasenko
2015-02-25 0:00 ` [PATCH 4/7] x86: entry.S: use JZ mnemonic after TEST, not JE Denys Vlasenko
2015-02-25 23:04 ` Borislav Petkov
2015-02-26 14:13 ` Denys Vlasenko
2015-02-26 15:16 ` Andy Lutomirski
2015-02-26 15:59 ` Borislav Petkov
2015-02-26 16:03 ` Andy Lutomirski
2015-02-26 19:21 ` Borislav Petkov
2015-02-25 0:00 ` [PATCH 5/7 v2] x86: get rid of KERNEL_STACK_OFFSET Denys Vlasenko
2015-02-25 1:11 ` Andy Lutomirski
2015-02-25 0:00 ` [PATCH 6/7 v2] x86: save r11 into pt_regs->eflags on SYSCALL64 fastpath Denys Vlasenko
2015-02-25 0:00 ` Denys Vlasenko [this message]
2015-02-25 0:03 ` [PATCH 1/7] x86: ia32entry.S: use more understandable constant Andy Lutomirski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424822419-10267-7-git-send-email-dvlasenk@redhat.com \
--to=dvlasenk@redhat.com \
--cc=ast@plumgrid.com \
--cc=bp@alien8.de \
--cc=fweisbec@gmail.com \
--cc=hpa@zytor.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=mingo@kernel.org \
--cc=oleg@redhat.com \
--cc=rostedt@goodmis.org \
--cc=torvalds@linux-foundation.org \
--cc=wad@chromium.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox