* [PATCH 1/2] regulator: fan53555: Add support for FAN53555BUC18X type
@ 2016-04-20 8:01 Wadim Egorov
2016-04-20 8:01 ` [PATCH 2/2] regulator: fan53555: Add support for FAN53555UC13X type Wadim Egorov
2016-04-20 16:20 ` Applied "regulator: fan53555: Add support for FAN53555BUC18X " Mark Brown
0 siblings, 2 replies; 4+ messages in thread
From: Wadim Egorov @ 2016-04-20 8:01 UTC (permalink / raw)
To: linux-kernel, broonie; +Cc: lgirdwood
FAN53555BUC18X has the DIE_ID 8, starts at 600mV and
increments in 10mV steps.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
drivers/regulator/fan53555.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 2cb5cc3..d4bfa93 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -65,6 +65,7 @@ enum {
FAN53555_CHIP_ID_03,
FAN53555_CHIP_ID_04,
FAN53555_CHIP_ID_05,
+ FAN53555_CHIP_ID_08 = 8,
};
enum {
@@ -220,6 +221,7 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
case FAN53555_CHIP_ID_01:
case FAN53555_CHIP_ID_03:
case FAN53555_CHIP_ID_05:
+ case FAN53555_CHIP_ID_08:
di->vsel_min = 600000;
di->vsel_step = 10000;
break;
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/2] regulator: fan53555: Add support for FAN53555UC13X type
2016-04-20 8:01 [PATCH 1/2] regulator: fan53555: Add support for FAN53555BUC18X type Wadim Egorov
@ 2016-04-20 8:01 ` Wadim Egorov
2016-04-20 16:20 ` Applied "regulator: fan53555: Add support for FAN53555UC13X type" to the regulator tree Mark Brown
2016-04-20 16:20 ` Applied "regulator: fan53555: Add support for FAN53555BUC18X " Mark Brown
1 sibling, 1 reply; 4+ messages in thread
From: Wadim Egorov @ 2016-04-20 8:01 UTC (permalink / raw)
To: linux-kernel, broonie; +Cc: lgirdwood
IC type options 00, 13 and 23 are sharing the same DIE_ID 0.
Let's differentiate between these revisions.
FAN53555UC13X has the ID 0 and REV 0xf, starts at 800mV and
increments in 10mV steps.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
drivers/regulator/fan53555.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index d4bfa93..d7da81a 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -68,6 +68,12 @@ enum {
FAN53555_CHIP_ID_08 = 8,
};
+/* IC mask revision */
+enum {
+ FAN53555_CHIP_REV_00 = 0x3,
+ FAN53555_CHIP_REV_13 = 0xf,
+};
+
enum {
SILERGY_SYR82X = 8,
};
@@ -218,6 +224,22 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
/* Init voltage range and step */
switch (di->chip_id) {
case FAN53555_CHIP_ID_00:
+ switch (di->chip_rev) {
+ case FAN53555_CHIP_REV_00:
+ di->vsel_min = 600000;
+ di->vsel_step = 10000;
+ break;
+ case FAN53555_CHIP_REV_13:
+ di->vsel_min = 800000;
+ di->vsel_step = 10000;
+ break;
+ default:
+ dev_err(di->dev,
+ "Chip ID %d with rev %d not supported!\n",
+ di->chip_id, di->chip_rev);
+ return -EINVAL;
+ }
+ break;
case FAN53555_CHIP_ID_01:
case FAN53555_CHIP_ID_03:
case FAN53555_CHIP_ID_05:
--
1.9.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Applied "regulator: fan53555: Add support for FAN53555UC13X type" to the regulator tree
2016-04-20 8:01 ` [PATCH 2/2] regulator: fan53555: Add support for FAN53555UC13X type Wadim Egorov
@ 2016-04-20 16:20 ` Mark Brown
0 siblings, 0 replies; 4+ messages in thread
From: Mark Brown @ 2016-04-20 16:20 UTC (permalink / raw)
To: Wadim Egorov; +Cc: Mark Brown, linux-kernel, broonie, lgirdwood
The patch
regulator: fan53555: Add support for FAN53555UC13X type
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From e57cbb70b7b3773f78fc6b8b70ab1eb3367e5350 Mon Sep 17 00:00:00 2001
From: Wadim Egorov <w.egorov@phytec.de>
Date: Wed, 20 Apr 2016 10:01:08 +0200
Subject: [PATCH] regulator: fan53555: Add support for FAN53555UC13X type
IC type options 00, 13 and 23 are sharing the same DIE_ID 0.
Let's differentiate between these revisions.
FAN53555UC13X has the ID 0 and REV 0xf, starts at 800mV and
increments in 10mV steps.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/fan53555.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index d4bfa9312724..d7da81a875cf 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -68,6 +68,12 @@ enum {
FAN53555_CHIP_ID_08 = 8,
};
+/* IC mask revision */
+enum {
+ FAN53555_CHIP_REV_00 = 0x3,
+ FAN53555_CHIP_REV_13 = 0xf,
+};
+
enum {
SILERGY_SYR82X = 8,
};
@@ -218,6 +224,22 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
/* Init voltage range and step */
switch (di->chip_id) {
case FAN53555_CHIP_ID_00:
+ switch (di->chip_rev) {
+ case FAN53555_CHIP_REV_00:
+ di->vsel_min = 600000;
+ di->vsel_step = 10000;
+ break;
+ case FAN53555_CHIP_REV_13:
+ di->vsel_min = 800000;
+ di->vsel_step = 10000;
+ break;
+ default:
+ dev_err(di->dev,
+ "Chip ID %d with rev %d not supported!\n",
+ di->chip_id, di->chip_rev);
+ return -EINVAL;
+ }
+ break;
case FAN53555_CHIP_ID_01:
case FAN53555_CHIP_ID_03:
case FAN53555_CHIP_ID_05:
--
2.8.0.rc3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Applied "regulator: fan53555: Add support for FAN53555BUC18X type" to the regulator tree
2016-04-20 8:01 [PATCH 1/2] regulator: fan53555: Add support for FAN53555BUC18X type Wadim Egorov
2016-04-20 8:01 ` [PATCH 2/2] regulator: fan53555: Add support for FAN53555UC13X type Wadim Egorov
@ 2016-04-20 16:20 ` Mark Brown
1 sibling, 0 replies; 4+ messages in thread
From: Mark Brown @ 2016-04-20 16:20 UTC (permalink / raw)
To: Wadim Egorov; +Cc: Mark Brown, linux-kernel, broonie, lgirdwood
The patch
regulator: fan53555: Add support for FAN53555BUC18X type
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 5e39cf49729b910795daa0b86052463d23c0a18d Mon Sep 17 00:00:00 2001
From: Wadim Egorov <w.egorov@phytec.de>
Date: Wed, 20 Apr 2016 10:01:07 +0200
Subject: [PATCH] regulator: fan53555: Add support for FAN53555BUC18X type
FAN53555BUC18X has the DIE_ID 8, starts at 600mV and
increments in 10mV steps.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/fan53555.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 2cb5cc311610..d4bfa9312724 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -65,6 +65,7 @@ enum {
FAN53555_CHIP_ID_03,
FAN53555_CHIP_ID_04,
FAN53555_CHIP_ID_05,
+ FAN53555_CHIP_ID_08 = 8,
};
enum {
@@ -220,6 +221,7 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
case FAN53555_CHIP_ID_01:
case FAN53555_CHIP_ID_03:
case FAN53555_CHIP_ID_05:
+ case FAN53555_CHIP_ID_08:
di->vsel_min = 600000;
di->vsel_step = 10000;
break;
--
2.8.0.rc3
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-04-20 16:20 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-20 8:01 [PATCH 1/2] regulator: fan53555: Add support for FAN53555BUC18X type Wadim Egorov
2016-04-20 8:01 ` [PATCH 2/2] regulator: fan53555: Add support for FAN53555UC13X type Wadim Egorov
2016-04-20 16:20 ` Applied "regulator: fan53555: Add support for FAN53555UC13X type" to the regulator tree Mark Brown
2016-04-20 16:20 ` Applied "regulator: fan53555: Add support for FAN53555BUC18X " Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox